#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
srcdir = .
program_transform_name =
-datadir = $(prefix)/lib
+datadir = $(prefix)/share
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
-docdir = $(datadir)/doc
+GDB_NLM_DEPS =
SHELL = /bin/sh
-INSTALL = $${srcroot}/install.sh -c
+INSTALL = $$s/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL_DATA = $(INSTALL) -m 644
INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
+INSTALL_DOSREL = install-dosrel-fake
+
AS = as
AR = ar
AR_FLAGS = rc
CC = cc
+# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
+# here so that they can be overridden by Makefile fragments.
+HOST_CC = $(CC_FOR_BUILD)
+HOST_PREFIX =
+HOST_PREFIX_1 = loser-
+
# We don't specify -g -O because many compilers don't support -g -O,
# and/or -O is broken in and of itself.
CFLAGS = -g
+LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_TARGET = $(CFLAGS)
+LDFLAGS_FOR_TARGET =
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+PICFLAG =
+PICFLAG_FOR_TARGET =
# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
# end-sanitize-chill
CXX = gcc
-# Use -O to stress test the compiler.
-CXXFLAGS = -g -O
+# Use -O2 to stress test the compiler.
+CXXFLAGS = -g -O2
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
RANLIB = ranlib
+
+DLLTOOL = dlltool
+
NM = nm
-MUNCH_NM = $(NM)
-GZIP = gzip
+# Not plain GZIP, since gzip looks there for extra command-line options.
+GZIPPROG = gzip
+
+# These values are substituted by configure.
+DEFAULT_YACC = yacc
+DEFAULT_LEX = lex
# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
-BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
- then echo $${rootme}/byacc/byacc ; \
- else echo byacc ; \
+BISON = `if [ -f $$r/byacc/byacc ] ; \
+ then echo $$r/byacc/byacc ; \
+ else echo ${DEFAULT_YACC} ; \
fi`
-LEX = `if [ -f $${rootme}/flex/flex ] ; \
- then echo $${rootme}/flex/flex ; \
- else echo flex ; fi`
+LEX = `if [ -f $$r/flex/flex ] ; \
+ then echo $$r/flex/flex ; \
+ else echo ${DEFAULT_LEX} ; fi`
-M4 = `if [ -f $${rootme}/m4/m4 ] ; \
- then echo $${rootme}/m4/m4 ; \
+M4 = `if [ -f $$r/m4/m4 ] ; \
+ then echo $$r/m4/m4 ; \
else echo m4 ; fi`
-MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
- then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
+ then echo $$r/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
# This just becomes part of the MAKEINFO definition passed down to
# using the makeinfo from the object tree.
MAKEINFOFLAGS =
-EXPECT = `if [ -f $${rootme}/expect/expect ] ; \
- then echo $${rootme}/expect/expect ; \
+EXPECT = `if [ -f $$r/expect/expect ] ; \
+ then echo $$r/expect/expect ; \
else echo expect ; fi`
-RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
- then echo $${srcroot}/dejagnu/runtest ; \
+RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
+ then echo $$s/dejagnu/runtest ; \
else echo runtest ; fi`
-# libraries that may need to be augmented on a system-by-system basis
-X11_LIB = -lX11
-
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
SUBDIRS = "this is set via configure, don't edit this"
OTHERS =
+# This is set by the configure script to the list of directories which
+# should be built using the target tools.
+TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup
+
+# Target libraries are put under this directory:
+# Changed by configure to $(target_alias) if cross.
+TARGET_SUBDIR = .
+
+# This is set by the configure script to the arguments passed to configure.
+CONFIG_ARGUMENTS =
+
+# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
+# was used.
+SET_LIB_PATH =
+
+# This is the name of the environment variable used for the path to
+# the libraries. This may be changed by configure.in.
+RPATH_ENVVAR = LD_LIBRARY_PATH
+
+# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
+REALLY_SET_LIB_PATH = \
+ $(RPATH_ENVVAR)=$$r/bfd:$$r/opcodes:$$$(RPATH_ENVVAR); \
+ export $(RPATH_ENVVAR);
+
ALL = all.normal
INSTALL_TARGET = install-dirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
- install-gcc
+ install-gcc \
+ $(INSTALL_DOSREL)
+
CC_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ fi; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
+ fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
+# If CC_FOR_TARGET is not overriden on the command line, then this
+# variable is passed down to the gcc Makefile, where it is used to
+# build libgcc2.a. We define it here so that it can itself be
+# overridden on the command line.
+GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/
+
# start-sanitize-chill
CHILL_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
# end-sanitize-chill
CXX_FOR_TARGET = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
+ if [ -f $$r/gcc/xgcc ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ if [ -f $$r/$(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -B$$r/newlib/ -L$$r/winsup -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $$s/newlib/libc/include -nostdinc; \
+ fi; \
+ else \
+ echo $$r/gcc/xgcc -B$$r/gcc/; \
+ fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
- t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+ t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
- if [ -f $${rootme}/gas/Makefile ] ; then \
- echo $${rootme}/gas/as.new ; \
+ if [ -f $$r/gas/as.new ] ; then \
+ echo $$r/gas/as.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
- t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
+ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+LD_FOR_TARGET = ` \
+ if [ -f $$r/ld/ld.new ] ; then \
+ echo $$r/ld/ld.new ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(LD); \
+ else \
+ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
+ fi; \
+ fi`
+
+DLLTOOL_FOR_TARGET = ` \
+ if [ -f $$r/binutils/dlltool ] ; then \
+ echo $$r/binutils/dlltool ; \
+ else \
+ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ echo $(DLLTOOL); \
+ else \
+ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
fi; \
fi`
AR_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/ar ] ; then \
- echo $${rootme}/binutils/ar ; \
+ if [ -f $$r/binutils/ar ] ; then \
+ echo $$r/binutils/ar ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
- t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
+ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
fi; \
fi`
RANLIB_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/ranlib ] ; then \
- echo $${rootme}/binutils/ranlib ; \
+ if [ -f $$r/binutils/ranlib ] ; then \
+ echo $$r/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
- t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
+ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
- if [ -f $${rootme}/binutils/Makefile ] ; then \
- echo $${rootme}/binutils/nm ; \
+ if [ -f $$r/binutils/nm.new ] ; then \
+ echo $$r/binutils/nm.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
- t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
+ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
fi; \
fi`
-# FIXME: This is badly named.
-XTRAFLAGS = ` \
- if [ -f $${rootme}/gcc/Makefile ] ; then \
- if [ -f $${rootme}/newlib/Makefile ] ; then \
- echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
- else \
- echo -I$${rootme}/gcc/include ; \
- fi ; \
- else \
- echo ; \
- fi`
-
#### host and target specific makefile fragments come in here.
###
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
$(end-sanitize-chill)\
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
+ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
- "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
+ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
+ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"M4=$(M4)" \
+ "MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
- "MUNCH_NM=$(MUNCH_NM)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "PICFLAG=$(PICFLAG)" \
+ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
+ "YACC=$(BISON)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)"
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
+ 'DLLTOOL=$(DLLTOOL)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
- 'XTRAFLAGS='
+ 'RANLIB=$(RANLIB)'
+
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags that are concerned with the location of the X11 include files
# and library files
+#
+# NOTE: until the top-level is getting the values via autoconf, it only
+# causes problems to have this top-level Makefile overriding the autoconf-set
+# values in child directories. Only variables that don't conflict with
+# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
+#
X11_FLAGS_TO_PASS = \
- "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
- "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
- "X11_LIB=$(X11_LIB)"
+ 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
+ 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
+ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
+ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
+ 'LD=$$(LD_FOR_TARGET)' \
+ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
+ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
- 'RANLIB=$$(RANLIB_FOR_TARGET)' \
- 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
+ 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
+ 'RANLIB=$$(RANLIB_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# If any variables are added here, they must be added to do-*, below.
# The HOST_* variables are a special case, which are used for the gcc
# cross-building scheme.
-HOST_CC = $(CC_FOR_BUILD)
-HOST_PREFIX =
-HOST_PREFIX_1 = loser-
EXTRA_GCC_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
+ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
'HOST_CC=$(CC_FOR_BUILD)' \
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
- 'XTRAFLAGS='
+ "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ `if test x"$(LANGUAGES)" != x; then echo "LANGUAGES=$(LANGUAGES)"; fi` \
+ `if test x"$(STMP_FIXPROTO)" != x; then echo "STMP_FIXPROTO=$(STMP_FIXPROTO)"; fi` \
+ `if test x"$(LIMITS_H_TEST)" != x; then echo "LIMITS_H_TEST=$(LIMITS_H_TEST)"; fi` \
+ `if test x"$(LIBGCC1_TEST)" != x; then echo "LIBGCC1_TEST=$(LIBGCC1_TEST)"; fi` \
+ `if test x"$(LIBGCC2_CFLAGS)" != x; then echo "LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)"; fi` \
+ `if test x"$(LIBGCC2_INCLUDES)" != x; then echo "LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)"; fi` \
+ `if test x"$(ENQUIRE)" != x; then echo "ENQUIRE=$(ENQUIRE)"; fi` \
+ `if test x"$(BOOT_CFLAGS)" != x; then echo "BOOT_CFLAGS=$(BOOT_CFLAGS)"; fi`
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
+ all-apache \
all-autoconf \
+ all-bash \
all-bfd \
all-binutils \
all-byacc \
all-cvs \
+ all-db \
all-dejagnu \
all-diff \
all-dosutils \
all-etc \
all-fileutils \
+ all-findutils \
all-find \
all-flex \
all-gas \
all-gawk \
- all-gdb \
all-gprof \
all-grep \
+ all-grez \
all-gzip \
all-hello \
all-indent \
+ all-inet \
all-ispell \
+ all-itcl \
all-ld \
all-libiberty \
all-m4 \
all-make \
all-mmalloc \
all-opcodes \
- all-pagas \
all-patch \
+ all-perl \
all-prms \
all-rcs \
all-readline \
all-tgas \
all-time \
all-uudecode \
- all-wdiff
+ all-wdiff
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
-CHECK_MODULES = \
+#
+# The list is in two parts. The first lists those tools which
+# are tested as part of the host's native tool-chain, and not
+# tested in a cross configuration.
+NATIVE_CHECK_MODULES = \
+ check-byacc \
+ check-flex
+
+CROSS_CHECK_MODULES = \
+ check-apache \
check-autoconf \
+ check-bash \
check-bfd \
check-binutils \
- check-byacc \
check-cvs \
+ check-db \
check-dejagnu \
check-diff \
check-etc \
check-fileutils \
+ check-findutils \
check-find \
- check-flex \
check-gas \
check-gawk \
- check-gdb \
check-gprof \
check-grep \
check-gzip \
check-hello \
check-indent \
+ check-inet \
check-ispell \
+ check-itcl \
check-ld \
check-libiberty \
check-m4 \
check-make \
check-mmcheckoc \
check-opcodes \
- check-pagas \
check-patch \
+ check-perl \
check-prms \
check-rcs \
check-readline \
check-uudecode \
check-wdiff
+CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
INSTALL_MODULES = \
+ install-apache \
install-autoconf \
+ install-bash \
install-bfd \
install-binutils \
install-byacc \
install-cvs \
+ install-db \
install-dejagnu \
install-diff \
+ install-dosutils \
install-etc \
install-fileutils \
+ install-findutils \
install-find \
install-flex \
install-gas \
install-gawk \
- install-gdb \
- install-glob \
install-gprof \
install-grep \
+ install-grez \
install-gzip \
install-hello \
install-indent \
+ install-inet \
install-ispell \
+ install-itcl \
install-ld \
install-libiberty \
install-m4 \
install-make \
install-mmalloc \
install-opcodes \
- install-pagas \
install-patch \
+ install-perl \
install-prms \
install-rcs \
install-readline \
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-emacs \
+ all-emacs19 \
+ all-gdb \
all-expect \
all-gash \
+ all-guile \
all-tclX \
all-tk
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-emacs \
+ check-gdb \
+ check-guile \
check-expect \
check-gash \
check-tclX \
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-emacs \
+ install-emacs19 \
+ install-gdb \
+ install-guile \
install-expect \
install-gash \
install-tclX \
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- $(start-sanitize-chill) \
- all-chillrt \
- $(end-sanitize-chill) \
- all-libio \
- all-libg++ \
- all-newlib \
- all-xiberty
+ all-target-libio \
+ all-target-libstdc++ \
+ all-target-librx \
+ all-target-libg++ \
+ all-target-newlib \
+ all-target-winsup \
+ all-target-libgloss \
+ all-target-libiberty \
+ all-target-examples
+
+# This is a list of the configure targets for all of the modules which
+# are compiled using the target tools.
+CONFIGURE_TARGET_MODULES = \
+ configure-target-libio \
+ configure-target-libstdc++ \
+ configure-target-librx \
+ configure-target-libg++ \
+ configure-target-newlib \
+ configure-target-winsup \
+ configure-target-libgloss \
+ configure-target-libiberty \
+ configure-target-examples
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- $(start-sanitize-chill) \
- check-chillrt \
- $(end-sanitize-chill) \
- check-libio \
- check-libg++ \
- check-newlib \
- check-xiberty
+ check-target-libio \
+ check-target-libstdc++ \
+ check-target-libg++ \
+ check-target-newlib \
+ check-target-winsup \
+ check-target-libiberty
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- $(start-sanitize-chill) \
- install-chillrt \
- $(end-sanitize-chill) \
- install-libio \
- install-libg++ \
- install-newlib \
- install-xiberty
-
-# This is a shell case of all modules which are compiled using
-# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
-TARGET_LIBS = libio | libg++ | newlib | xiberty
-# start-sanitize-chill
-TARGET_LIBS = chillrt | libio | libg++ | newlib | xiberty
-# end-sanitize-chill
+ install-target-libio \
+ install-target-libstdc++ \
+ install-target-libg++ \
+ install-target-newlib \
+ install-target-winsup \
+ install-target-libgloss \
+ install-target-libiberty
+
+# This is a list of the targets for which we can do a clean-{target}.
+CLEAN_MODULES = \
+ clean-apache \
+ clean-autoconf \
+ clean-bash \
+ clean-bfd \
+ clean-binutils \
+ clean-byacc \
+ clean-cvs \
+ clean-db \
+ clean-dejagnu \
+ clean-diff \
+ clean-dosutils \
+ clean-etc \
+ clean-fileutils \
+ clean-findutils \
+ clean-find \
+ clean-flex \
+ clean-gas \
+ clean-gawk \
+ clean-gprof \
+ clean-grep \
+ clean-grez \
+ clean-gzip \
+ clean-hello \
+ clean-indent \
+ clean-inet \
+ clean-ispell \
+ clean-itcl \
+ clean-ld \
+ clean-libiberty \
+ clean-m4 \
+ clean-make \
+ clean-mmalloc \
+ clean-opcodes \
+ clean-patch \
+ clean-perl \
+ clean-prms \
+ clean-rcs \
+ clean-readline \
+ clean-release \
+ clean-recode \
+ clean-sed \
+ clean-send-pr \
+ clean-shellutils \
+ clean-sim \
+ clean-tar \
+ clean-tcl \
+ clean-texinfo \
+ clean-textutils \
+ clean-tgas \
+ clean-time \
+ clean-uudecode \
+ clean-wdiff
+
+# All of the target modules that can be cleaned
+CLEAN_TARGET_MODULES = \
+ clean-target-libio \
+ clean-target-libstdc++ \
+ clean-target-librx \
+ clean-target-libg++ \
+ clean-target-newlib \
+ clean-target-winsup \
+ clean-target-libgloss \
+ clean-target-libiberty \
+ clean-target-examples
+
+# All of the x11 modules that can be cleaned
+CLEAN_X11_MODULES = \
+ clean-emacs \
+ clean-emacs19 \
+ clean-gdb \
+ clean-expect \
+ clean-gash \
+ clean-guile \
+ clean-tclX \
+ clean-tk
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
do-install-info \
do-installcheck \
do-mostlyclean \
- do-realclean
+ do-maintainer-clean \
+ do-TAGS
.PHONY: $(DO_X)
$(DO_X):
@target=`echo $@ | sed -e 's/^do-//'`; \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
- for i in $(SUBDIRS); do \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(SUBDIRS) -dummy-; do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
- $(TARGET_LIBS) ) \
- for flag in $(EXTRA_TARGET_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
- done; \
- ;; \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
- eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
esac ; \
- export AR AS CC CXX NM RANLIB XTRAFLAGS; \
+ export AR AS CC CXX NM RANLIB DLLTOOL; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" \
+ $${target}); \
+ then true; else exit 1; fi; \
+ else true; fi; \
+ done
+ @target=`echo $@ | sed -e 's/^do-//'`; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ for i in $(TARGET_CONFIGDIRS) -dummy-; do \
+ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
+ done; \
+ export AR AS CC CXX NM RANLIB DLLTOOL; \
+ if (cd $(TARGET_SUBDIR)/$$i; \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi install-info
-.PHONY: clean distclean mostlyclean realclean local-clean local-distclean
+.PHONY: clean distclean mostlyclean maintainer-clean realclean
+.PHONY: local-clean local-distclean local-maintainer-clean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
+# Make sure makeinfo is built before we do a `make info'.
+do-info: all-texinfo
+
install-info: do-install-info dir.info
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ s=`cd $(srcdir); pwd`; export s; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
else true ; fi
local-distclean:
-rm -f Makefile config.status
+ -if [ "$(TARGET_SUBDIR)" != "." ]; then \
+ rm -rf $(TARGET_SUBDIR); \
+ else true; fi
+
+local-maintainer-clean:
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
-realclean: do-realclean local-clean local-distclean
+maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
+maintainer-clean: local-distclean
+realclean: maintainer-clean
+
+# This rule is used to clean specific modules.
+.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
+$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
+ @dir=`echo $@ | sed -e 's/clean-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
+ else \
+ true; \
+ fi
+
+.PHONY: $(CLEAN_TARGET_MODULES)
+$(CLEAN_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/clean-target-//'`; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
+ else \
+ true; \
+ fi
+
+clean-target: $(CLEAN_TARGET_MODULES)
# Check target.
# Installation targets.
-.PHONY: install uninstall vault-install
+.PHONY: install uninstall source-vault binary-vault vault-install
install: $(INSTALL_TARGET)
uninstall:
@echo "the uninstall target is not supported in this tree"
+source-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) source-vault
+
+binary-vault:
+ $(MAKE) -f ./release/Build-A-Release \
+ host=$(host_alias) target=$(target_alias)
+
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd` ; export rootme ; \
+ r=`pwd` ; export r ; \
+ $(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
+# inet-install is used because the I*Net wants DejaGNU installed but
+# not built. Similarly, gzip is built but not installed.
+inet-install:
+ $(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
+
# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
- touch gcc/stmp-fixinc gcc/stmp-fixproto; \
+ touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd` ; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd` ; export s; \
+ $(SET_LIB_PATH) \
(cd ./gcc; \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
-# all-glob is handled specially because it doesn't actually build.
-.PHONY: $(ALL_MODULES) all-glob
-$(ALL_MODULES) all-glob:
+#
+# all-gui, and all-libproc are handled specially because
+# they are still experimental, and if they fail to build, that
+# shouldn't stop "make all".
+.PHONY: $(ALL_MODULES) all-gui all-libproc
+$(ALL_MODULES) all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
else \
true; \
fi
-# This rule is used to check the modules which use FLAGS_TO_PASS. To
-# build a target check-X means to cd to X and make all.
-.PHONY: $(CHECK_MODULES)
-$(CHECK_MODULES):
+# These rules are used to check the modules which use FLAGS_TO_PASS.
+# To build a target check-X means to cd to X and make check. Some
+# modules are only tested in a native toolchain.
+
+.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
+$(NATIVE_CHECK_MODULES):
+ @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+ dir=`echo $@ | sed -e 's/check-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
+ else \
+ true; \
+ fi; \
+ fi
+
+$(CROSS_CHECK_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
$(INSTALL_MODULES): install-dirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
+# This rule is used to configure the modules which are built with the
+# target tools.
+.PHONY: $(CONFIGURE_TARGET_MODULES)
+$(CONFIGURE_TARGET_MODULES):
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+ r=`pwd`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for $${dir}, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ @dir=`echo $@ | sed -e 's/configure-target-//'`; \
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/$${dir} ]; then \
+ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
+ cd $(TARGET_SUBDIR)/$${dir}; \
+ case $(srcdir) in \
+ /*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/$${dir}"; \
+ libsrcdir="$$s/$${dir}"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ $(SHELL) $${libsrcdir}/configure \
+ $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ $(SHELL) $$s/configure \
+ $(CONFIG_ARGUMENTS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ @dir=`echo $@ | sed -e 's/all-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
+ @dir=`echo $@ | sed -e 's/check-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): install-dirs
- @dir=`echo $@ | sed -e 's/install-//'`; \
- if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
- (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ @dir=`echo $@ | sed -e 's/install-target-//'`; \
+ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
$(ALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
else \
$(CHECK_X11_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
else \
$(INSTALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
else \
.PHONY: all-gcc
all-gcc:
@if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
else \
true; \
fi
+.PHONY: all-bootstrap
+all-bootstrap:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) bootstrap); \
+ else \
+ true; \
+ fi
+
.PHONY: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
- rootme=`pwd`; export rootme; \
- srcroot=`cd $(srcdir); pwd`; export srcroot; \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
+
+# EXPERIMENTAL STUFF
+# This rule is used to install the modules which use FLAGS_TO_PASS.
+# To build a target install-X means to cd to X and make install.
+.PHONY: install-dosrel
+install-dosrel: install-dirs info
+ @dir=`echo $@ | sed -e 's/install-//'`; \
+ if [ -f ./$${dir}/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+install-dosrel-fake:
+
+
# This is a list of inter-dependencies among modules.
+all-apache:
all-autoconf: all-m4
+all-bash:
all-bfd:
-all-binutils: all-libiberty all-opcodes all-bfd all-flex
+all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
all-byacc:
-# start-sanitize-chill
-all-chillrt: all-binutils all-gas all-gcc all-newlib
-# end-sanitize-chill
all-cvs:
-all-dejagnu:
+all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
+all-emacs19: all-byacc
all-etc:
+configure-target-examples: $(ALL_GCC)
+all-target-examples: configure-target-examples
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
+all-findutils:
all-find:
all-flex: all-libiberty all-byacc
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
-all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
-all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
-all-glob:
-all-gprof: all-libiberty all-bfd
+ALL_GCC = all-gcc
+all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
+all-bootstrap: all-libiberty all-byacc all-binutils all-gas all-ld
+GDB_TK = all-tk all-tcl
+all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
+all-gprof: all-libiberty all-bfd all-opcodes
all-grep: all-libiberty
+all-grez: all-libiberty all-bfd all-opcodes
+all-gui: all-gdb all-libproc all-target-librx
+all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
-all-ispell: all-emacs
-all-ld: all-libiberty all-bfd all-byacc all-flex
-all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib all-libio
-all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
+all-inet: all-tcl all-send-pr all-perl
+all-ispell: all-emacs19
+all-itcl: all-tcl all-tk
+all-ld: all-libiberty all-bfd all-opcodes all-byacc all-flex
+configure-target-libg++: $(ALL_GCC) configure-target-librx
+all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++
+configure-target-libgloss: $(ALL_GCC)
+all-target-libgloss: configure-target-libgloss configure-target-newlib
+configure-target-libio: $(ALL_GCC)
+all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
all-libiberty:
+configure-target-librx: $(ALL_GCC) configure-target-newlib
+all-target-librx: configure-target-librx
+configure-target-libstdc++: $(ALL_GCC)
+all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
-all-newlib: all-binutils all-gas all-pagas all-gcc
-all-opcodes: all-bfd
-all-patch:
+configure-target-newlib: $(ALL_GCC)
+all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc
+all-opcodes: all-bfd all-libiberty
+all-patch: all-libiberty
+all-perl:
all-prms: all-libiberty
all-rcs:
all-readline:
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
-all-sim: all-libiberty all-bfd
+all-sim: all-libiberty all-bfd all-opcodes
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-tk: all-tcl
all-texinfo: all-libiberty
all-textutils:
-all-tgas: all-libiberty all-bfd
+all-tgas: all-libiberty all-bfd all-opcodes
all-time:
all-wdiff:
+all-target-winsup: all-target-newlib all-target-libiberty all-target-librx all-target-libio configure-target-winsup
+configure-target-winsup: configure-target-newlib
all-uudecode: all-libiberty
-all-xiberty: all-gcc all-newlib
+configure-target-libiberty: $(ALL_GCC)
+all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib
+all-target: $(ALL_TARGET_MODULES)
+install-target: $(INSTALL_TARGET_MODULES)
### other supporting targets
MAKEDIRS= \
$(prefix) \
- $(exec_prefix) \
- $(tooldir)
-
+ $(exec_prefix)
.PHONY: install-dirs
install-dirs:
@for i in $(MAKEDIRS) ; do \
etags tags: TAGS
-TAGS:
- etags `$(MAKE) ls`
-
-ls:
- @echo Makefile
- @for i in $(SUBDIRS); \
- do \
- (cd $$i; \
- pwd=`pwd`; \
- wd=`basename $$pwd`; \
- for j in `$(MAKE) ls`; \
- do \
- echo $$wd/$$j; \
- done) \
- done
+# Right now this just builds TAGS in each subdirectory. emacs19 has the
+# ability to use several tags files at once, so there is probably no need
+# to combine them into one big TAGS file (like CVS 1.3 does). We could
+# (if we felt like it) have this Makefile write a piece of elisp which
+# the user could load to tell emacs19 where all the TAGS files we just
+# built are.
+TAGS: do-TAGS
# with the gnu make, this is done automatically.
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
- COPYING COPYING.LIB install.sh
+ mpw-README mpw-build.in mpw-config.in mpw-configure \
+ COPYING COPYING.LIB install.sh config-ml.in symlink-tree
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
- configure.texi standards.texi make-stds.texi
-
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
-GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
-
-.PHONY: setup-dirs-gdb gdb.tar.gz make-gdb.tar.gz
-setup-dirs-gdb:
- ./configure sun4
- $(MAKE) clean
- ./configure -rm sun4
- chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
-
-gdb.tar.gz: setup-dirs-gdb
- (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
- (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
- $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.gz
-
-make-gdb.tar.gz: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
- rm -rf proto-toplev; mkdir proto-toplev
- ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
- (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
- ln -s ../$$i . ; \
- done)
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- # Put only one copy (four hard links) of COPYING in the tar file.
- rm proto-toplev/bfd/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
- rm proto-toplev/include/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
- rm proto-toplev/readline/COPYING
- ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
-
- # Change the bug reporting address in configure to bug-gdb
- rm proto-toplev/configure
- <configure >proto-toplev/configure
- chmod a+x proto-toplev/configure
-
- # Take out texinfo and glob from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- -e '/^host_libs=/s/glob //' \
- <configure.in >proto-toplev/configure.in
-
- # Take out texinfo from a few places; make simple BISON=bison line.
- rm proto-toplev/Makefile.in
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- -e '/^BISON = /,/^$$/d' \
- -e '/^# BISON:/s/.*/BISON = bison -y/' \
- <Makefile.in >proto-toplev/Makefile.in
-
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
- chmod og=u `find proto-toplev -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER.tar.gz"; \
- rm -f gdb-$$VER; ln -s proto-toplev gdb-$$VER; \
- tar cfh - gdb-$$VER \
- | $(GZIP) -v -9 >gdb-$$VER.tar.gz)
-
- # Make the testsuite archive separately.
- ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
- # Blow away the Chill test that requires a Chill compiled executable,
- # since GNU Chill is not yet publically available.
- rm -rf proto-toplev/gdb/testsuite/gdb.t31
-
- # Put a copy of COPYING in the tar file.
- ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
- chmod og=u `find proto-toplev/gdb/testsuite -print`
- (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
- echo "==> Making gdb-$$VER-testsuite.tar.gz"; \
- tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
- gdb-$$VER/config.sub gdb-$$VER/move-if-change \
- gdb-$$VER/gdb/testsuite \
- | $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.gz)
+ETC_SUPPORT= Makefile.in cfg-paper.texi configure configure.in configure.man \
+ configure.texi standards.texi make-stds.texi \
+ configure.info* standards.info* cfg-paper.info*
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
-# Directories that might want `make diststuff' run.
-DISTSTUFFDIRS= ld gprof gdb libg++ binutils
# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
-# Directories where "info" should be built.
-DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb
.PHONY: taz
<Makefile.in >tmp
mv -f tmp Makefile.in
#
+ $(start-sanitize-Sanitize)
+ @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
+ $(end-sanitize-Sanitize)
./configure sun4
- # Doc files don't change; include them in distribution.
- for f in $(DISTDOCDIRS) ; do \
- if [ -r $$f/Makefile ]; then \
- (cd $$f ; $(MAKE) info) || exit 1 ; \
- else true ; fi ; \
- done
- # Make links, and run "make diststuff" when needed.
- # The `echo' for setting `p' is to convert all whitespace to spaces.
- # Then the `case' further below should tell whether $$d is in
- # DISTSTUFFDIRS.
+ [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
+ || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \
+ CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
+ # Make links, and run "make diststuff" or "make info" when needed.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- p=" `echo $(DISTSTUFFDIRS)` " ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
- case " $$p " in \
- *" $$d "*) \
- echo making diststuff in $$d ; \
- (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \
- esac ; \
+ if [ ! -f $$d/Makefile ] ; then true ; \
+ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
+ elif grep '^info:' $$d/Makefile >/dev/null ; then \
+ (cd $$d ; $(MAKE) info ) || exit 1 ; \
+ fi ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
+ cd etc ; $(MAKE) info
$(MAKE) distclean
#
mkdir proto-toplev/etc
- (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
+ (cd proto-toplev/etc; \
+ for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
- done)
+ done)
#
- # Take out texinfo and glob from configurable dirs
+ # Take out texinfo from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
- -e '/^host_libs=/s/glob //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
- ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
+ ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
+ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
+ ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
+ if test -r texinfo/util/tex3patch ; then \
+ mkdir proto-toplev/texinfo/util && \
+ ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
+ else true; fi
chmod og=u `find . -print`
- (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
- echo "==> Making $(TOOL)-$$VER.tar.gz"; \
- rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
- tar cfh - $(TOOL)-$$VER \
- | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.gz)
+ $(MAKE) -f Makefile.in do-tar-gz TOOL=$(TOOL) \
+ VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`
+
+do-tar-gz:
+ echo "==> Making $(TOOL)-$(VER).tar.gz"
+ -rm -f $(TOOL)-$(VER)
+ ln -s proto-toplev $(TOOL)-$(VER)
+ tar cfh $(TOOL)-$(VER).tar $(TOOL)-$(VER)
+ $(GZIPPROG) -v -9 $(TOOL)-$(VER).tar
TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.gz
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes
+GAS_SUPPORT_DIRS= bfd include libiberty opcodes make-all.com setup.com
gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
-BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof make-all.com setup.com
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
+ SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
-LIBGXX_SUPPORT_DIRS=include libio libiberty xiberty
+LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats
+ $(MAKE) -f Makefile.in taz TOOL=gnats \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
+.PHONY: gdb.tar.gz
+GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils
+GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi`
+gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in taz TOOL=gdb \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)"
+
+.PHONY: newlib.tar.gz
+NEWLIB_SUPPORT_DIRS=libgloss
+# taz configures for the sun4 target which won't configure newlib.
+# We need newlib configured so that the .info files are made.
+# Unfortunately, it is not enough to just configure newlib separately:
+# taz will build the .info files but since SUBDIRS won't contain newlib,
+# distclean won't be run (leaving Makefile, config.status, and the tmp files
+# used in building the .info files, eg: *.def, *.ref).
+# The problem isn't solvable however without a lot of extra work because
+# target libraries are built in subdir $(target_alias) which gets nuked during
+# the make distclean. For now punt on the issue of shipping newlib info files
+# with newlib net releases and wait for a day when some native target (sun4?)
+# supports newlib (if only minimally).
+newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
+ $(MAKE) -f Makefile.in taz TOOL=newlib \
+ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
+ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
+
.NOEXPORT:
MAKEOVERRIDES=
projects / binutils.git / blobdiff