#include "symtab.h"
#include "frame.h"
#include "inferior.h"
+#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
static int may_follow_exec = MAY_FOLLOW_EXEC;
+static int debug_infrun = 0;
+
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
-/* On MIPS16, a function that returns a floating point value may call
- a library helper function to copy the return value to a floating point
- register. The IGNORE_HELPER_CALL macro returns non-zero if we
- should ignore (i.e. step over) this function call. */
-#ifndef IGNORE_HELPER_CALL
-#define IGNORE_HELPER_CALL(pc) 0
-#endif
-
-/* On some systems, the PC may be left pointing at an instruction that won't
- actually be executed. This is usually indicated by a bit in the PSW. If
- we find ourselves in such a state, then we step the target beyond the
- nullified instruction before returning control to the user so as to avoid
- confusion. */
-
-#ifndef INSTRUCTION_NULLIFIED
-#define INSTRUCTION_NULLIFIED 0
-#endif
-
/* We can't step off a permanent breakpoint in the ordinary way, because we
can't remove it. Instead, we have to advance the PC to the next
instruction. This macro should expand to a pointer to a function that
static void
default_skip_permanent_breakpoint (void)
{
- error ("\
+ error (_("\
The program is stopped at a permanent breakpoint, but GDB does not know\n\
how to step past a permanent breakpoint on this architecture. Try using\n\
-a command like `return' or `jump' to continue execution.");
+a command like `return' or `jump' to continue execution."));
}
#endif
static struct breakpoint *step_resume_breakpoint = NULL;
-/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
- interactions with an inferior that is running a kernel function
- (aka, a system call or "syscall"). wait_for_inferior therefore
- may have a need to know when the inferior is in a syscall. This
- is a count of the number of inferior threads which are known to
- currently be running in a syscall. */
-static int number_of_threads_in_syscalls;
-
/* This is a cached copy of the pid/waitstatus of the last event
returned by target_wait()/deprecated_target_wait_hook(). This
information is returned by get_last_target_status(). */
step_range_end = 0;
/* What is this a.out's name? */
- printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+ printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
tgt = find_run_target ();
/* If we can't find one, things are in a very strange state... */
if (tgt == NULL)
- error ("Could find run target to save before following exec");
+ error (_("Could find run target to save before following exec"));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
{
- /* NOTE: cagney/2002-03-17: The add_show_from_set() function clones
- the set command passed as a parameter. The clone operation will
- include (BUG?) any ``set'' command callback, if present.
- Commands like ``info set'' call all the ``show'' command
- callbacks. Unfortunately, for ``show'' commands cloned from
- ``set'', this includes callbacks belonging to ``set'' commands.
- Making this worse, this only occures if add_show_from_set() is
- called after add_cmd_sfunc() (BUG?). */
+ /* NOTE: cagney/2002-03-17: The deprecated_add_show_from_set()
+ function clones the set command passed as a parameter. The clone
+ operation will include (BUG?) any ``set'' command callback, if
+ present. Commands like ``info set'' call all the ``show''
+ command callbacks. Unfortunately, for ``show'' commands cloned
+ from ``set'', this includes callbacks belonging to ``set''
+ commands. Making this worse, this only occures if
+ deprecated_add_show_from_set() is called after add_cmd_sfunc()
+ (BUG?). */
if (cmd_type (c) == set_cmd)
if (!target_can_lock_scheduler)
{
scheduler_mode = schedlock_off;
- error ("Target '%s' cannot support this command.", target_shortname);
+ error (_("Target '%s' cannot support this command."), target_shortname);
}
}
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
QUIT;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: resume (step=%d, signal=%d)\n",
+ step, sig);
+
/* FIXME: calling breakpoint_here_p (read_pc ()) three times! */
resume_ptid = RESUME_ALL; /* Default */
- if ((step || singlestep_breakpoints_inserted_p) &&
- (stepping_past_singlestep_breakpoint
- || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
+ if ((step || singlestep_breakpoints_inserted_p)
+ && (stepping_past_singlestep_breakpoint
+ || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
{
/* Stepping past a breakpoint without inserting breakpoints.
Make sure only the current thread gets to step, so that
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on) ||
- (scheduler_mode == schedlock_step &&
- (step || singlestep_breakpoints_inserted_p)))
+ if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
/* Make sure we were stopped either at a breakpoint, or because
of a Ctrl-C. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
- wait_status.value.sig != TARGET_SIGNAL_INT))
+ || (wait_status.value.sig != TARGET_SIGNAL_TRAP
+ && wait_status.value.sig != TARGET_SIGNAL_INT))
{
return 0;
}
select_frame (get_current_frame ());
}
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- return 1;
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ if (breakpoint_here_p (wait_pc))
+ return 1;
}
return 0;
-
+
}
/* Record the pc of the program the last time it stopped. This is
if (addr == (CORE_ADDR) -1)
{
- /* If there is a breakpoint at the address we will resume at,
- step one instruction before inserting breakpoints
- so that we do not stop right away (and report a second
- hit at this breakpoint). */
-
if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+ /* There is a breakpoint at the address we will resume at,
+ step one instruction before inserting breakpoints so that
+ we do not stop right away (and report a second hit at this
+ breakpoint). */
oneproc = 1;
-
-#ifndef STEP_SKIPS_DELAY
-#define STEP_SKIPS_DELAY(pc) (0)
-#define STEP_SKIPS_DELAY_P (0)
-#endif
- /* Check breakpoint_here_p first, because breakpoint_here_p is fast
- (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
- is slow (it needs to read memory from the target). */
- if (STEP_SKIPS_DELAY_P
- && breakpoint_here_p (read_pc () + 4)
- && STEP_SKIPS_DELAY (read_pc ()))
+ else if (gdbarch_single_step_through_delay_p (current_gdbarch)
+ && gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ()))
+ /* We stepped onto an instruction that needs to be stepped
+ again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
write_pc (addr);
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
+ paddr_nz (addr), siggnal, step);
+
/* In a multi-threaded task we may select another thread
and then continue or step.
{
insert_breakpoints ();
/* If we get here there was no call to error() in
- insert breakpoints -- so they were inserted. */
+ insert breakpoints -- so they were inserted. */
breakpoints_inserted = 1;
}
cannot be read unless the inferior is stopped. At that point, we
are not guaranteed the inferior is stopped and so the read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
- updated correctly when the inferior is stopped. */
+ updated correctly when the inferior is stopped. */
prev_pc = read_pc ();
/* Resume inferior. */
and in any case decode why it stopped, and act accordingly. */
/* Do this only if we are not using the event loop, or if the target
does not support asynchronous execution. */
- if (!event_loop_p || !target_can_async_p ())
+ if (!target_can_async_p ())
{
wait_for_inferior ();
normal_stop ();
/* The first resume is not following a fork/vfork/exec. */
pending_follow.kind = TARGET_WAITKIND_SPURIOUS; /* I.e., none. */
- /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
- number_of_threads_in_syscalls = 0;
-
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
{
infwait_normal_state,
infwait_thread_hop_state,
- infwait_nullified_state,
infwait_nonstep_watch_state
};
CORE_ADDR stop_func_end;
char *stop_func_name;
struct symtab_and_line sal;
- int remove_breakpoints_on_following_step;
int current_line;
struct symtab *current_symtab;
int handling_longjmp; /* FIXME */
ptid_t ptid;
ptid_t saved_inferior_ptid;
+ int step_after_step_resume_breakpoint;
int stepping_through_solib_after_catch;
bpstat stepping_through_solib_catchpoints;
- int enable_hw_watchpoints_after_wait;
- int stepping_through_sigtramp;
int new_thread_event;
struct target_waitstatus tmpstatus;
enum infwait_states infwait_state;
void handle_inferior_event (struct execution_control_state *ecs);
static void step_into_function (struct execution_control_state *ecs);
-static void insert_step_resume_breakpoint (struct frame_info *step_frame,
- struct execution_control_state *ecs);
+static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
+static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
struct execution_control_state ecss;
struct execution_control_state *ecs;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: wait_for_inferior\n");
+
old_cleanups = make_cleanup (delete_step_resume_breakpoint,
&step_resume_breakpoint);
{
/* ecs->another_trap? */
ecs->random_signal = 0;
- ecs->remove_breakpoints_on_following_step = 0;
+ ecs->step_after_step_resume_breakpoint = 0;
ecs->handling_longjmp = 0; /* FIXME */
ecs->stepping_through_solib_after_catch = 0;
ecs->stepping_through_solib_catchpoints = NULL;
- ecs->enable_hw_watchpoints_after_wait = 0;
- ecs->stepping_through_sigtramp = 0;
ecs->sal = find_pc_line (prev_pc, 0);
ecs->current_line = ecs->sal.line;
ecs->current_symtab = ecs->sal.symtab;
ecs->wp = &(ecs->ws);
}
-/* Call this function before setting step_resume_breakpoint, as a
- sanity check. There should never be more than one step-resume
- breakpoint per thread, so we should never be setting a new
- step_resume_breakpoint when one is already active. */
-static void
-check_for_old_step_resume_breakpoint (void)
-{
- if (step_resume_breakpoint)
- warning
- ("GDB bug: infrun.c (wait_for_inferior): dropping old step_resume breakpoint");
-}
-
/* Return the cached copy of the last pid/waitstatus returned by
target_wait()/deprecated_target_wait_hook(). The data is actually
cached by handle_inferior_event(), which gets called immediately
ecs->handling_longjmp, ecs->another_trap,
ecs->stepping_through_solib_after_catch,
ecs->stepping_through_solib_catchpoints,
- ecs->stepping_through_sigtramp,
ecs->current_line, ecs->current_symtab);
/* Load infrun state for the new thread. */
&ecs->handling_longjmp, &ecs->another_trap,
&ecs->stepping_through_solib_after_catch,
&ecs->stepping_through_solib_catchpoints,
- &ecs->stepping_through_sigtramp,
&ecs->current_line, &ecs->current_symtab);
}
inferior_ptid = ecs->ptid;
affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
by software breakpoints should be handled through the normal breakpoint
layer.
-
+
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
DECR_PC_AFTER_BREAK. I don't know any specific target that generates
these signals at breakpoints (the code has been in GDB since at least
1992) so I can not guess how to handle them here.
-
+
In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
would have the PC after hitting a watchpoint affected by
DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
if (SOFTWARE_SINGLE_STEP_P ())
{
/* When using software single-step, a SIGTRAP can only indicate
- an inserted breakpoint. This actually makes things
- easier. */
+ an inserted breakpoint. This actually makes things
+ easier. */
if (singlestep_breakpoints_inserted_p)
/* When software single stepping, the instruction at [prev_pc]
is never a breakpoint, but the instruction following
else
{
/* When using hardware single-step, a SIGTRAP is reported for
- both a completed single-step and a software breakpoint. Need
- to differentiate between the two as the latter needs
- adjusting but the former does not. */
+ both a completed single-step and a software breakpoint. Need
+ to differentiate between the two as the latter needs
+ adjusting but the former does not. */
if (currently_stepping (ecs))
{
if (prev_pc == breakpoint_pc
defined in the file "config/pa/nm-hppah.h", accesses the variable
indirectly. Mutter something rude about the HP merge. */
int sw_single_step_trap_p = 0;
- int stopped_by_watchpoint = -1; /* Mark as unknown. */
+ int stopped_by_watchpoint = -1; /* Mark as unknown. */
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
switch (ecs->infwait_state)
{
case infwait_thread_hop_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
ecs->waiton_ptid = pid_to_ptid (-1);
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_normal_state:
- /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event
- is serviced in this loop, below. */
- if (ecs->enable_hw_watchpoints_after_wait)
- {
- TARGET_ENABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- ecs->enable_hw_watchpoints_after_wait = 0;
- }
- stepped_after_stopped_by_watchpoint = 0;
- break;
-
- case infwait_nullified_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
stepped_after_stopped_by_watchpoint = 0;
break;
case infwait_nonstep_watch_state:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: infwait_nonstep_watch_state\n");
insert_breakpoints ();
/* FIXME-maybe: is this cleaner than setting a flag? Does it
break;
default:
- internal_error (__FILE__, __LINE__, "bad switch");
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
ecs->infwait_state = infwait_normal_state;
ui_out_text (uiout, "[New ");
ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
ui_out_text (uiout, "]\n");
-
-#if 0
- /* NOTE: This block is ONLY meant to be invoked in case of a
- "thread creation event"! If it is invoked for any other
- sort of event (such as a new thread landing on a breakpoint),
- the event will be discarded, which is almost certainly
- a bad thing!
-
- To avoid this, the low-level module (eg. target_wait)
- should call in_thread_list and add_thread, so that the
- new thread is known by the time we get here. */
-
- /* We may want to consider not doing a resume here in order
- to give the user a chance to play with the new thread.
- It might be good to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens
- automatically in either the OS or the native code).
- Therefore we need to continue all threads in order to
- make progress. */
-
- target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
-#endif
}
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
/* Ignore gracefully during startup of the inferior, as it
might be the shell which has just loaded some objects,
otherwise add the symbols for the newly loaded objects. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
return;
case TARGET_WAITKIND_SPURIOUS:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
return;
case TARGET_WAITKIND_SIGNALLED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
stop_print_frame = 0;
stop_signal = ecs->ws.value.sig;
target_terminal_ours (); /* Must do this before mourn anyway */
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
stop_signal = TARGET_SIGNAL_TRAP;
pending_follow.kind = ecs->ws.kind;
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECED\n");
stop_signal = TARGET_SIGNAL_TRAP;
/* NOTE drow/2002-12-05: This code should be pushed down into the
- target_wait function. Until then following vfork on HP/UX 10.20
- is probably broken by this. Of course, it's broken anyway. */
+ target_wait function. Until then following vfork on HP/UX 10.20
+ is probably broken by this. Of course, it's broken anyway. */
/* Is this a target which reports multiple exec events per actual
call to exec()? (HP-UX using ptrace does, for example.) If so,
ignore all but the last one. Just resume the exec'r, and wait
}
goto process_event_stop_test;
- /* These syscall events are returned on HP-UX, as part of its
- implementation of page-protection-based "hardware" watchpoints.
- HP-UX has unfortunate interactions between page-protections and
- some system calls. Our solution is to disable hardware watches
- when a system call is entered, and reenable them when the syscall
- completes. The downside of this is that we may miss the precise
- point at which a watched piece of memory is modified. "Oh well."
-
- Note that we may have multiple threads running, which may each
- enter syscalls at roughly the same time. Since we don't have a
- good notion currently of whether a watched piece of memory is
- thread-private, we'd best not have any page-protections active
- when any thread is in a syscall. Thus, we only want to reenable
- hardware watches when no threads are in a syscall.
-
- Also, be careful not to try to gather much state about a thread
- that's in a syscall. It's frequently a losing proposition. */
+ /* Be careful not to try to gather much state about a thread
+ that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
- number_of_threads_in_syscalls++;
- if (number_of_threads_in_syscalls == 1)
- {
- TARGET_DISABLE_HW_WATCHPOINTS (PIDGET (inferior_ptid));
- }
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
get it entirely out of the syscall. (We get notice of the
event when the thread is just on the verge of exiting a
syscall. Stepping one instruction seems to get it back
- into user code.)
-
- Note that although the logical place to reenable h/w watches
- is here, we cannot. We cannot reenable them before stepping
- the thread (this causes the next wait on the thread to hang).
-
- Nor can we enable them after stepping until we've done a wait.
- Thus, we simply set the flag ecs->enable_hw_watchpoints_after_wait
- here, which will be serviced immediately after the target
- is waited on. */
+ into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- if (number_of_threads_in_syscalls > 0)
- {
- number_of_threads_in_syscalls--;
- ecs->enable_hw_watchpoints_after_wait =
- (number_of_threads_in_syscalls == 0);
- }
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_STOPPED:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
stop_signal = ecs->ws.value.sig;
break;
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
done what needs to be done, if anything.
-
- One of the possible circumstances for this is when the
- inferior produces output for the console. The inferior has
- not stopped, and we are ignoring the event. Another possible
- circumstance is any event which the lower level knows will be
- reported multiple times without an intervening resume. */
+
+ One of the possible circumstances for this is when the
+ inferior produces output for the console. The inferior has
+ not stopped, and we are ignoring the event. Another possible
+ circumstance is any event which the lower level knows will be
+ reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
prepare_to_wait (ecs);
return;
}
stop_pc = read_pc_pid (ecs->ptid);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n", paddr_nz (stop_pc));
+
if (stepping_past_singlestep_breakpoint)
{
- gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p);
+ gdb_assert (SOFTWARE_SINGLE_STEP_P ()
+ && singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
stepping_past_singlestep_breakpoint = 0;
/* We've either finished single-stepping past the single-step
- breakpoint, or stopped for some other reason. It would be nice if
- we could tell, but we can't reliably. */
+ breakpoint, or stopped for some other reason. It would be nice if
+ we could tell, but we can't reliably. */
if (stop_signal == TARGET_SIGNAL_TRAP)
- {
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
SOFTWARE_SINGLE_STEP (0, 0);
singlestep_breakpoints_inserted_p = 0;
}
if (thread_hop_needed)
- {
- int remove_status;
+ {
+ int remove_status;
- /* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- /* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
- singlestep_breakpoints_inserted_p = 0;
- }
+ /* Saw a breakpoint, but it was hit by the wrong thread.
+ Just continue. */
- remove_status = remove_breakpoints ();
- /* Did we fail to remove breakpoints? If so, try
- to set the PC past the bp. (There's at least
- one situation in which we can fail to remove
- the bp's: On HP-UX's that use ttrace, we can't
- change the address space of a vforking child
- process until the child exits (well, okay, not
- then either :-) or execs. */
- if (remove_status != 0)
- {
- /* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc + 4, ecs->ptid);
- /* We need to restart all the threads now,
- * unles we're running in scheduler-locked mode.
- * Use currently_stepping to determine whether to
- * step or continue.
- */
- /* FIXME MVS: is there any reason not to call resume()? */
- if (scheduler_mode == schedlock_on)
- target_resume (ecs->ptid,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- else
- target_resume (RESUME_ALL,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+ }
+
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try
+ to set the PC past the bp. (There's at least
+ one situation in which we can fail to remove
+ the bp's: On HP-UX's that use ttrace, we can't
+ change the address space of a vforking child
+ process until the child exits (well, okay, not
+ then either :-) or execs. */
+ if (remove_status != 0)
+ {
+ /* FIXME! This is obviously non-portable! */
+ write_pc_pid (stop_pc + 4, ecs->ptid);
+ /* We need to restart all the threads now,
+ * unles we're running in scheduler-locked mode.
+ * Use currently_stepping to determine whether to
+ * step or continue.
+ */
+ /* FIXME MVS: is there any reason not to call resume()? */
+ if (scheduler_mode == schedlock_on)
+ target_resume (ecs->ptid,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
else
- { /* Single step */
- breakpoints_inserted = 0;
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs);
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->another_trap = 1;
-
- ecs->infwait_state = infwait_thread_hop_state;
- keep_going (ecs);
- registers_changed ();
- return;
- }
+ target_resume (RESUME_ALL,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+ else
+ { /* Single step */
+ breakpoints_inserted = 0;
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs);
+ ecs->waiton_ptid = ecs->ptid;
+ ecs->wp = &(ecs->ws);
+ ecs->another_trap = 1;
+
+ ecs->infwait_state = infwait_thread_hop_state;
+ keep_going (ecs);
+ registers_changed ();
+ return;
+ }
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- sw_single_step_trap_p = 1;
- ecs->random_signal = 0;
- }
+ {
+ sw_single_step_trap_p = 1;
+ ecs->random_signal = 0;
+ }
}
else
ecs->random_signal = 1;
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
+
context_switch (ecs);
if (deprecated_context_hook)
singlestep_breakpoints_inserted_p = 0;
}
- /* If PC is pointing at a nullified instruction, then step beyond
- it so that the user won't be confused when GDB appears to be ready
- to execute it. */
-
- /* if (INSTRUCTION_NULLIFIED && currently_stepping (ecs)) */
- if (INSTRUCTION_NULLIFIED)
- {
- registers_changed ();
- target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
-
- /* We may have received a signal that we want to pass to
- the inferior; therefore, we must not clobber the waitstatus
- in WS. */
-
- ecs->infwait_state = infwait_nullified_state;
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->tmpstatus);
- prepare_to_wait (ecs);
- return;
- }
-
/* It may not be necessary to disable the watchpoint to stop over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint. */
if (HAVE_STEPPABLE_WATCHPOINT && STOPPED_BY_WATCHPOINT (ecs->ws))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
resume (1, 0);
prepare_to_wait (ecs);
return;
includes evaluating watchpoints, things will come to a
stop in the correct manner. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: STOPPED_BY_WATCHPOINT\n");
remove_breakpoints ();
registers_changed ();
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0); /* Single step */
stopped_by_random_signal = 0;
breakpoints_failed = 0;
+ if (stop_signal == TARGET_SIGNAL_TRAP
+ && trap_expected
+ && gdbarch_single_step_through_delay_p (current_gdbarch)
+ && currently_stepping (ecs))
+ {
+ /* We're trying to step of a breakpoint. Turns out that we're
+ also on an instruction that needs to be stepped multiple
+ times before it's been fully executing. E.g., architectures
+ with a delay slot. It needs to be stepped twice, once for
+ the instruction and once for the delay slot. */
+ int step_through_delay
+ = gdbarch_single_step_through_delay (current_gdbarch,
+ get_current_frame ());
+ if (debug_infrun && step_through_delay)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
+ if (step_range_end == 0 && step_through_delay)
+ {
+ /* The user issued a continue when stopped at a breakpoint.
+ Set up for another trap and get out of here. */
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
+ else if (step_through_delay)
+ {
+ /* The user issued a step when stopped at a breakpoint.
+ Maybe we should stop, maybe we should not - the delay
+ slot *might* correspond to a line of source. In any
+ case, don't decide that here, just set ecs->another_trap,
+ making sure we single-step again before breakpoints are
+ re-inserted. */
+ ecs->another_trap = 1;
+ }
+ }
+
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
1) break; to really stop and return to the debugger,
stack. */
if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoints_inserted &&
- (stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_SEGV
- || stop_signal == TARGET_SIGNAL_EMT))
- || stop_soon == STOP_QUIETLY
- || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ || (breakpoints_inserted
+ && (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_SEGV
+ || stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
stop_stepping (ecs);
return;
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
/* Don't even think about breakpoints if just proceeded over a
breakpoint. */
if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected)
- bpstat_clear (&stop_bpstat);
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: trap expected\n");
+ bpstat_clear (&stop_bpstat);
+ }
else
{
/* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
stopped_by_watchpoint);
/* Following in case break condition called a
}
/* NOTE: cagney/2003-03-29: These two checks for a random signal
- at one stage in the past included checks for an inferior
- function call's call dummy's return breakpoint. The original
- comment, that went with the test, read:
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
- ``End of a stack dummy. Some systems (e.g. Sony news) give
- another signal besides SIGTRAP, so check here as well as
- above.''
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
If someone ever tries to get get call dummys on a
non-executable stack to work (where the target would stop
enabled when momentary breakpoints were not being used, I
suspect that it won't be the case.
- NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
- be necessary for call dummies on a non-executable stack on
- SPARC. */
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
/* Signal not for debugging purposes. */
int printed = 0;
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n", stop_signal);
+
stopped_by_random_signal = 1;
if (signal_print[stop_signal])
if (signal_program[stop_signal] == 0)
stop_signal = TARGET_SIGNAL_0;
+ if (prev_pc == read_pc ()
+ && !breakpoints_inserted
+ && breakpoint_here_p (read_pc ())
+ && step_resume_breakpoint == NULL)
+ {
+ /* We were just starting a new sequence, attempting to
+ single-step off of a breakpoint and expecting a SIGTRAP.
+ Intead this signal arrives. This signal will take us out
+ of the stepping range so GDB needs to remember to, when
+ the signal handler returns, resume stepping off that
+ breakpoint. */
+ /* To simplify things, "continue" is forced to use the same
+ code paths as single-step - set a breakpoint at the
+ signal return address and then, once hit, step off that
+ breakpoint. */
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ ecs->step_after_step_resume_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+
if (step_range_end != 0
&& stop_signal != TARGET_SIGNAL_0
&& stop_pc >= step_range_start && stop_pc < step_range_end
- && frame_id_eq (get_frame_id (get_current_frame ()), step_frame_id))
+ && frame_id_eq (get_frame_id (get_current_frame ()),
+ step_frame_id)
+ && step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
Note that this is only needed for a signal delivered
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
- insert_step_resume_breakpoint (get_current_frame (), ecs);
+ insert_step_resume_breakpoint_at_frame (get_current_frame ());
+ keep_going (ecs);
+ return;
}
+
+ /* Note: step_resume_breakpoint may be non-NULL. This occures
+ when either there's a nested signal, or when there's a
+ pending signal enabled just as the signal handler returns
+ (leaving the inferior at the step-resume-breakpoint without
+ actually executing it). Either way continue until the
+ breakpoint is really hit. */
keep_going (ecs);
return;
}
/* If we hit the breakpoint at longjmp, disable it for the
duration of this command. Then, install a temporary
breakpoint at the target of the jmp_buf. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_SET_LONGJMP_RESUME\n");
disable_longjmp_breakpoint ();
remove_breakpoints ();
breakpoints_inserted = 0;
delete_step_resume_breakpoint (&step_resume_breakpoint);
}
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ());
- else
-#endif /* 0 */
- set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
+ set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_CLEAR_LONGJMP_RESUME\n");
remove_breakpoints ();
breakpoints_inserted = 0;
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (frame_id_inner (get_frame_id (get_current_frame ()),
- step_frame_id)))
- {
- ecs->another_trap = 1;
- keep_going (ecs);
- return;
- }
-#endif /* 0 */
disable_longjmp_breakpoint ();
ecs->handling_longjmp = 0; /* FIXME */
if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
/* else fallthrough */
case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_SINGLE\n");
if (breakpoints_inserted)
{
remove_breakpoints ();
break;
case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
/* We are about to nuke the step_resume_breakpointt via the
return;
case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
/* We are about to nuke the step_resume_breakpoin via the
step-resume bp, but it makes no effort to ensure that
the one deleted is the one currently stopped at. MVS */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_STEP_RESUME\n");
+
if (step_resume_breakpoint == NULL)
{
step_resume_breakpoint =
bpstat_find_step_resume_breakpoint (stop_bpstat);
}
delete_step_resume_breakpoint (&step_resume_breakpoint);
+ if (ecs->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back
+ to doing that. */
+ ecs->step_after_step_resume_breakpoint = 0;
+ remove_breakpoints ();
+ breakpoints_inserted = 0;
+ ecs->another_trap = 1;
+ keep_going (ecs);
+ return;
+ }
break;
case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_THROUGH_SIGTRAMP\n");
/* If were waiting for a trap, hitting the step_resume_break
doesn't count as getting it. */
if (trap_expected)
case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
#ifdef SOLIB_ADD
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTATE_WHAT_CHECK_SHLIBS\n");
/* Remove breakpoints, we eventually want to step over the
shlib event breakpoint, and SOLIB_ADD might adjust
breakpoint addresses via breakpoint_re_set. */
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
the call that caused this catchpoint to trigger. That
gives the user a more useful vantage from which to
examine their program's state. */
- else if (what.main_action ==
- BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ else if (what.main_action
+ == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
{
/* ??rehrauer: If I could figure out how to get the
right return PC from here, we could just set a temp
test for stepping. But, if not stepping,
do not stop. */
- /* Are we stepping to get the inferior out of the dynamic
- linker's hook (and possibly the dld itself) after catching
- a shlib event? */
+ /* Are we stepping to get the inferior out of the dynamic linker's
+ hook (and possibly the dld itself) after catching a shlib
+ event? */
if (ecs->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
ecs->another_trap = 1;
keep_going (ecs);
return;
}
#endif
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
ecs->stepping_through_solib_after_catch = 0;
if (step_resume_breakpoint)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: step-resume breakpoint\n");
+
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
if (step_range_end == 0)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
/* Likewise if we aren't even stepping. */
keep_going (ecs);
return;
within it! */
if (stop_pc >= step_range_start && stop_pc < step_range_end)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
+ paddr_nz (step_range_start),
+ paddr_nz (step_range_end));
keep_going (ecs);
return;
}
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
+
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
init_sal (&sr_sal);
sr_sal.pc = pc_after_resolver;
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
keep_going (ecs);
|| step_over_calls == STEP_OVER_ALL)
&& get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
/* The inferior, while doing a "step" or "next", has ended up in
- a signal trampoline (either by a signal being delivered or by
- the signal handler returning). Just single-step until the
- inferior leaves the trampoline (either by calling the handler
- or returning). */
+ a signal trampoline (either by a signal being delivered or by
+ the signal handler returning). Just single-step until the
+ inferior leaves the trampoline (either by calling the handler
+ or returning). */
keep_going (ecs);
return;
}
- if (frame_id_eq (frame_unwind_id (get_current_frame ()),
- step_frame_id))
+ if (frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
{
/* It's a subroutine call. */
CORE_ADDR real_stop_pc;
-
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
+
if ((step_over_calls == STEP_OVER_NONE)
|| ((step_range_end == 1)
&& in_prologue (prev_pc, ecs->stop_func_start)))
stop_stepping (ecs);
return;
}
-
- if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
+
+ if (step_over_calls == STEP_OVER_ALL)
{
/* We're doing a "next", set a breakpoint at callee's return
address (the address at which the caller will
resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
- ecs);
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
keep_going (ecs);
return;
}
-
+
/* If we are in a function call trampoline (a stub between the
- calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to the
- end of, if we do step into it. */
+ calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to the
+ end of, if we do step into it. */
real_stop_pc = skip_language_trampoline (stop_pc);
if (real_stop_pc == 0)
real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
-
+
if (IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start))
{
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
sr_sal.pc = ecs->stop_func_start;
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
-
- keep_going (ecs);
- return;
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
+ keep_going (ecs);
+ return;
}
/* If we have line number information for the function we are
- thinking of stepping into, step into it.
+ thinking of stepping into, step into it.
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
{
struct symtab_and_line tmp_sal;
-
+
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0)
{
}
/* If we have no line number and the step-stop-if-no-debug is
- set, we stop the step so that the user has a chance to switch
- in assembly mode. */
+ set, we stop the step so that the user has a chance to switch
+ in assembly mode. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
{
stop_step = 1;
}
/* Set a breakpoint at callee's return address (the address at
- which the caller will resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), ecs);
+ which the caller will resume). */
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
keep_going (ecs);
return;
}
/* Determine where this trampoline returns. */
CORE_ADDR real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
+
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
{
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
- /* Do not specify what the fp should be when we stop
- since on some machines the prologue
- is where the new fp value is established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+
+ /* Do not specify what the fp should be when we stop since
+ on some machines the prologue is where the new fp value
+ is established. */
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* Restart without fiddling with the step ranges or
other state. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE
&& ecs->stop_func_name == NULL)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
+
/* The inferior just stepped into, or returned to, an
undebuggable function (where there is no symbol, not even a
minimal symbol, corresponding to the address where the
{
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
- ecs);
+ insert_step_resume_breakpoint_at_frame (get_prev_frame (get_current_frame ()));
keep_going (ecs);
return;
}
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
stepping (does this always happen right after one instruction,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
we don't stop if we step into the middle of a different line.
That is said to make things like for (;;) statements work
better. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
This is particularly necessary for a one-line function,
in which after skipping the prologue we better stop even though
we will be in mid-line. */
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different function\n");
stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
stackless leaf function. I think the logic should instead look
at the unwound frame ID has that should give a more robust
indication of what happened. */
- if (step-ID == current-ID)
- still stepping in same function;
- else if (step-ID == unwind (current-ID))
- stepped into a function;
- else
- stepped out of a function;
- /* Of course this assumes that the frame ID unwind code is robust
- and we're willing to introduce frame unwind logic into this
- function. Fortunately, those days are nearly upon us. */
+ if (step - ID == current - ID)
+ still stepping in same function;
+ else if (step - ID == unwind (current - ID))
+ stepped into a function;
+ else
+ stepped out of a function;
+ /* Of course this assumes that the frame ID unwind code is robust
+ and we're willing to introduce frame unwind logic into this
+ function. Fortunately, those days are nearly upon us. */
#endif
{
struct frame_id current_frame = get_frame_id (get_current_frame ());
step_frame_id = current_frame;
}
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
keep_going (ecs);
}
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
ecs->stop_func_start to an address at which a breakpoint may be
legitimately placed.
-
+
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
made, GDB will enter an infinite loop when stepping through
optimized code consisting of VLIW instructions which contain
set, GDB will adjust the breakpoint address to the beginning of
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
-
+
if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
{
ecs->stop_func_start
= gdbarch_adjust_breakpoint_address (current_gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start);
}
if (ecs->stop_func_start == stop_pc)
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
+
/* Do not specify what the fp should be when we stop since on
some machines the prologue is where the new fp value is
established. */
- check_for_old_step_resume_breakpoint ();
- step_resume_breakpoint =
- set_momentary_breakpoint (sr_sal, null_frame_id, bp_step_resume);
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
step_range_end = step_range_start;
keep_going (ecs);
}
-/* The inferior, as a result of a function call (has left) or signal
- (about to leave) the single-step range. Set a momentary breakpoint
- within the step range where the inferior is expected to later
- return. */
+/* Insert a "step resume breakpoint" at SR_SAL with frame ID SR_ID.
+ This is used to both functions and to skip over code. */
+
+static void
+insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
+ struct frame_id sr_id)
+{
+ /* There should never be more than one step-resume breakpoint per
+ thread, so we should never be setting a new
+ step_resume_breakpoint when one is already active. */
+ gdb_assert (step_resume_breakpoint == NULL);
+ step_resume_breakpoint = set_momentary_breakpoint (sr_sal, sr_id,
+ bp_step_resume);
+ if (breakpoints_inserted)
+ insert_breakpoints ();
+}
+
+/* Insert a "step resume breakpoint" at RETURN_FRAME.pc. This is used
+ to skip a function (next, skip-no-debug) or signal. It's assumed
+ that the function/signal handler being skipped eventually returns
+ to the breakpoint inserted at RETURN_FRAME.pc.
+
+ For the skip-function case, the function may have been reached by
+ either single stepping a call / return / signal-return instruction,
+ or by hitting a breakpoint. In all cases, the RETURN_FRAME belongs
+ to the skip-function's caller.
+
+ For the signals case, this is called with the interrupted
+ function's frame. The signal handler, when it returns, will resume
+ the interrupted function at RETURN_FRAME.pc. */
static void
-insert_step_resume_breakpoint (struct frame_info *step_frame,
- struct execution_control_state *ecs)
+insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
struct symtab_and_line sr_sal;
- /* This is only used within the step-resume range/frame. */
- gdb_assert (frame_id_eq (step_frame_id, get_frame_id (step_frame)));
- gdb_assert (step_range_end != 0);
- /* Remember, if the call instruction is the last in the step range,
- the breakpoint will land just beyond that. Hence ``<=
- step_range_end''. Also, ignore check when "nexti". */
- gdb_assert (step_range_start == step_range_end
- || (get_frame_pc (step_frame) >= step_range_start
- && get_frame_pc (step_frame) <= step_range_end));
-
init_sal (&sr_sal); /* initialize to zeros */
- sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (step_frame));
+ sr_sal.pc = ADDR_BITS_REMOVE (get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
- check_for_old_step_resume_breakpoint ();
-
- step_resume_breakpoint
- = set_momentary_breakpoint (sr_sal, get_frame_id (step_frame),
- bp_step_resume);
-
- if (breakpoints_inserted)
- insert_breakpoints ();
+ insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
}
static void
stop_stepping (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
+
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
The signal was SIGTRAP, e.g. it was our signal, but we
decided we should resume from it.
- We're going to run this baby now!
+ We're going to run this baby now! */
- Insert breakpoints now, unless we are trying to one-proceed
- past a breakpoint. */
- /* If we've just finished a special step resume and we don't
- want to hit a breakpoint, pull em out. */
- if (step_resume_breakpoint == NULL
- && ecs->remove_breakpoints_on_following_step)
- {
- ecs->remove_breakpoints_on_following_step = 0;
- remove_breakpoints ();
- breakpoints_inserted = 0;
- }
- else if (!breakpoints_inserted && !ecs->another_trap)
+ if (!breakpoints_inserted && !ecs->another_trap)
{
breakpoints_failed = insert_breakpoints ();
if (breakpoints_failed)
static void
prepare_to_wait (struct execution_control_state *ecs)
{
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
if (ecs->infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
break;
default:
internal_error (__FILE__, __LINE__,
- "print_stop_reason: unrecognized enum value");
+ _("print_stop_reason: unrecognized enum value"));
break;
}
}
&& last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
- printf_filtered ("[Switching to %s]\n",
+ printf_filtered (_("[Switching to %s]\n"),
target_pid_or_tid_to_str (inferior_ptid));
previous_inferior_ptid = inferior_ptid;
}
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf_filtered ("Cannot remove breakpoints because ");
- printf_filtered ("program is no longer writable.\n");
- printf_filtered ("It might be running in another process.\n");
- printf_filtered ("Further execution is probably impossible.\n");
+ printf_filtered (_("\
+Cannot remove breakpoints because program is no longer writable.\n\
+It might be running in another process.\n\
+Further execution is probably impossible.\n"));
}
}
breakpoints_inserted = 0;
{
case PRINT_UNKNOWN:
/* FIXME: cagney/2002-12-01: Given that a frame ID does
- (or should) carry around the function and does (or
- should) use that when doing a frame comparison. */
+ (or should) carry around the function and does (or
+ should) use that when doing a frame comparison. */
if (stop_step
&& frame_id_eq (step_frame_id,
get_frame_id (get_current_frame ()))
do_frame_printing = 0;
break;
default:
- internal_error (__FILE__, __LINE__, "Unknown value.");
+ internal_error (__FILE__, __LINE__, _("Unknown value."));
}
/* For mi, have the same behavior every time we stop:
print everything but the source line. */
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
- print_stack_frame (get_selected_frame (), 0, source_flag);
+ print_stack_frame (get_selected_frame (NULL), 0, source_flag);
/* Display the auto-display expressions. */
do_displays ();
static void
sig_print_header (void)
{
- printf_filtered ("\
-Signal Stop\tPrint\tPass to program\tDescription\n");
+ printf_filtered (_("\
+Signal Stop\tPrint\tPass to program\tDescription\n"));
}
static void
if (args == NULL)
{
- error_no_arg ("signal to handle");
+ error_no_arg (_("signal to handle"));
}
/* Allocate and zero an array of flags for which signals to handle. */
else
{
/* Not a number and not a recognized flag word => complain. */
- error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+ error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
}
}
}
else
{
- printf_unfiltered ("Not confirmed, unchanged.\n");
+ printf_unfiltered (_("Not confirmed, unchanged.\n"));
gdb_flush (gdb_stdout);
}
}
if (validFlag)
handle_command (argBuf, from_tty);
else
- printf_filtered ("Invalid signal handling flag.\n");
+ printf_filtered (_("Invalid signal handling flag.\n"));
if (argBuf)
xfree (argBuf);
}
sig_print_info (oursig);
}
- printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
+ printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
\f
struct inferior_status
write_inferior_status_register (struct inferior_status *inf_status, int regno,
LONGEST val)
{
- int size = DEPRECATED_REGISTER_RAW_SIZE (regno);
+ int size = register_size (current_gdbarch, regno);
void *buf = alloca (size);
store_signed_integer (buf, size, val);
regcache_raw_write (inf_status->registers, regno, buf);
selected frame. */
if (frame == NULL)
{
- warning ("Unable to restore previously selected frame.\n");
+ warning (_("Unable to restore previously selected frame."));
return 0;
}
DEPRECATED_REGISTER_GDBARCH_SWAP (stop_registers);
deprecated_register_gdbarch_swap (NULL, 0, build_infrun);
- add_info ("signals", signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
+ add_info ("signals", signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
- add_com ("handle", class_run, handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("handle", class_run, handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
if (xdb_commands)
{
- add_com ("lz", class_info, signals_info,
- "What debugger does when program gets various signals.\n\
-Specify a signal as argument to print info on that signal only.");
- add_com ("z", class_run, xdb_handle_command,
- concat ("Specify how to handle a signal.\n\
+ add_com ("lz", class_info, signals_info, _("\
+What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only."));
+ add_com ("z", class_run, xdb_handle_command, _("\
+Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
-used by the debugger, typically SIGTRAP and SIGINT.\n", "Recognized actions include \"s\" (toggles between stop and nostop), \n\
+used by the debugger, typically SIGTRAP and SIGINT.\n\
+Recognized actions include \"s\" (toggles between stop and nostop), \n\
\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
-Pass and Stop may be combined.", NULL));
+Pass and Stop may be combined."));
}
if (!dbx_commands)
- stop_command =
- add_cmd ("stop", class_obscure, not_just_help_class_command, "There is no `stop' command, but you can set a hook on `stop'.\n\
+ stop_command = add_cmd ("stop", class_obscure,
+ not_just_help_class_command, _("\
+There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
-of the program stops.", &cmdlist);
+of the program stops."), &cmdlist);
+
+ add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
+Set inferior debugging."), _("\
+Show inferior debugging."), _("\
+When non-zero, inferior specific debugging is enabled."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setdebuglist, &showdebuglist);
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print[TARGET_SIGNAL_CANCEL] = 0;
#ifdef SOLIB_ADD
- add_show_from_set
- (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
- (char *) &stop_on_solib_events,
- "Set stopping for shared library events.\n\
+ add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
+ &stop_on_solib_events, _("\
+Set stopping for shared library events."), _("\
+Show stopping for shared library events."), _("\
If nonzero, gdb will give control to the user when the dynamic linker\n\
notifies gdb of shared library events. The most common event of interest\n\
-to the user would be loading/unloading of a new library.\n", &setlist), &showlist);
+to the user would be loading/unloading of a new library."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
#endif
c = add_set_enum_cmd ("follow-fork-mode",
child - the new process is debugged after a fork\n\
The unfollowed process will continue to run.\n\
By default, the debugger will follow the parent process.", &setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
- c = add_set_enum_cmd ("scheduler-locking", class_run, scheduler_enums, /* array of string names */
+ c = add_set_enum_cmd ("scheduler-locking", class_run,
+ scheduler_enums, /* array of string names */
&scheduler_mode, /* current mode */
"Set mode for locking scheduler during execution.\n\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
step == scheduler locked during every single-step operation.\n\
In this mode, no other thread may run during a step command.\n\
- Other threads may run while stepping over a function call ('next').", &setlist);
+ Other threads may run while stepping over a function call ('next').",
+ &setlist);
set_cmd_sfunc (c, set_schedlock_func); /* traps on target vector */
- add_show_from_set (c, &showlist);
-
- c = add_set_cmd ("step-mode", class_run,
- var_boolean, (char *) &step_stop_if_no_debug,
- "Set mode of the step operation. When set, doing a step over a\n\
-function without debug line information will stop at the first\n\
-instruction of that function. Otherwise, the function is skipped and\n\
-the step command stops at a different source line.", &setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
+
+ add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
+Set mode of the step operation."), _("\
+Show mode of the step operation."), _("\
+When set, doing a step over a function without debug line information\n\
+will stop at the first instruction of that function. Otherwise, the\n\
+function is skipped and the step command stops at a different source line."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
projects / binutils.git / blobdiff