+
+ * ppc-opc.c: New file. Opcode table for PowerPC, including
+ opcodes for POWER (RS/6000).
+ * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
+ * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
+ (CFILES): Add ppc-dis.c.
+ (ppc-dis.o, ppc-opc.o): New targets.
+ * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
+
+
+ * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
+ No space before 'u', 'f', or 'N'.
+
+
+ * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
+ farther than we should.
+
+ * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
+
+
+ * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
+
+
+ * i960-dis.c (print_insn_i960): Only read word2 if the instruction
+ needs it, to prevent reading past the end of a section.
+
+
+ * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
+ Removed t,A case for la; always use t,A(b) case.
+
+
+ * mips-dis.c (print_insn_arg): Handle 'k'.
+ * mips-opc.c: Make cache use k, not t.
+
+
+ * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
+ FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
+ FLOAT_FORMAT_CODE to put out floating point register names.
+
+
+ * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
+
+
+ * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
+
+
+ * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
+ larger than 32. Moved dsxx32 variants first for disassembler.
+
+
+ * z8kgen.c, z8k-opc.h: Add full lda information.
+
+
+ * hppa-dis.c (print_insn_hppa): Do not emit a space after
+ movb instructions. Any necessary space will be emitted by
+ the code to handle nullification completers.
+
+
+ * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
+
+
+ * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
+ * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
+
+
+ * mips-opc.c: Correct lwu opcode value (book had it wrong).
+
+
+ * z8k-dis.c (FETCH_DATA): get just the right amount of data.
+ (unpack_instr): Cope with ARG_IMM4M1 type instructions.
+
+
+ * m88k-dis.c (m88kdis): comment change. Remove space after
+ printing mnemonic.
+ (printop): handle new arg types DEC and XREG for m88110.
+
+
+ * hppa-dis.c (print_insn_hppa): Handle 'z' operand
+ type for absolute branch addresses. Delete special
+ "ble" and "be" code in 'W' operand code.
+
+
+ * mips-opc.c: Set hazard information correctly for branch
+ likely instructions.
+
+
+ * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
+ info->fprintf_func for printing and info->print_address_func for
+ address output.
+
+
+ * mips-opc.c: Set INSN_TRAP for tXX instructions.
+
+
+ Corrected second case of "b" for disassembler.
+
+
+ * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
+ to BFD swapping routines to correspond to BFD name changes.
+
+
+ * mips-opc.c: Change div machine instruction to be z,s,t rather
+ than s,t. Change div macro to be d,v,t rather than d,s,t.
+ Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
+ rem and remu which generates only the corresponding div
+ instruction. This is for compatibility with the MIPS assembler,
+ which only generates the simple machine instruction when an
+ explicit destination of $0 is used.
+ * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
+
+
+ WR_31 hazard for bal, bgezal, bltzal.
+
+
+ * hppa-dis.c (print_insn_hppa): Use print function
+ from within the disassemble_info, not fprintf_filtered.
+
+
+ * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
+
+
+ * mips-opc.c ("absu"): Removed.
+ ("dabs"): Added.
+
+
+ * mips-opc.c: Added r6000 and r4000 instructions and macros.
+ Changed hazard information to distinguish between memory load
+ delays and coprocessor load delays.
+
+
+ * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
+
+
+ * configure.in: Don't pass cpu to config.bfd.
+
+
+ * m88k-dis.c (m88kdis): Make class unsigned.
+
+
+ * alpha-dis.c (print_insn_alpha): One branch format case was
+ missing the instruction name.
+
+
+ * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
+ Add the arch-specific auxiliary files.
+ (OFILES): Remove the arch-specific auxiliary files
+ and use BFD_MACHINES instead of DIS_LIBS.
+ * configure.in: Set BFD_MACHINES based on --with-targets option.
+
+
+ * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
+ for swc1.
+
+
+ * sparc-opc.c: Change CONST to const to deal with gcc
+ -Dconst=__const -traditional.
+
+
+ coprocessor instructions out of #if 0, and made them use new
+ argument type "C".
+
+
+ * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
+
+
+ * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
+ instruction, for use by the disassembler.
+
+ * sparc-dis.c (SEX): Add sign extension macro. Replace many
+ hand-coded sign extensions that depended on 32-bit host ints.
+ FIXME, we still depend on big-endian host bitfield ordering.
+ (sparc_print_insn): Set the insn_info_valid field, and the
+ other fields that describe the instruction being printed.
+
+
+ * sparc-opc.c (call): Accept all 6 addressing modes valid for
+ `jmp' instead of just one of them.
+
+
+ * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
+ (fput_fp_reg_r): Renamed from fput_reg_r.
+ (fput_fp_reg): New function.
+ (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
+
+ * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
+
+ * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
+
+
+ * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
+
+ * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
+ don't output a space.
+
+ * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
+
+
+ * mips-opc.c: New file, containing opcode table from
+ ../include/opcode/mips.h.
+ * Makefile.in: Add it.
+
+
+ * m88k-dis.c: New file, moved in from gdb and changed to use the
+ new dis-asm.h disassembler interface.
+ * Makefile.in (DIS_LIBS): Added m88k-dis.o.
+ (m88k-dis.o): New target.
+
* mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
projects / binutils.git / blobdiff