// output.cc -- manage the output file for gold
-// Copyright 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+// Copyright (C) 2006-2014 Free Software Foundation, Inc.
// This file is part of gold.
#include <cerrno>
#include <fcntl.h>
#include <unistd.h>
-#include <sys/mman.h>
#include <sys/stat.h>
#include <algorithm>
+
+#ifdef HAVE_SYS_MMAN_H
+#include <sys/mman.h>
+#endif
+
#include "libiberty.h"
+#include "dwarf.h"
#include "parameters.h"
#include "object.h"
#include "symtab.h"
#include "reloc.h"
#include "merge.h"
#include "descriptors.h"
+#include "layout.h"
#include "output.h"
+// For systems without mmap support.
+#ifndef HAVE_MMAP
+# define mmap gold_mmap
+# define munmap gold_munmap
+# define mremap gold_mremap
+# ifndef MAP_FAILED
+# define MAP_FAILED (reinterpret_cast<void*>(-1))
+# endif
+# ifndef PROT_READ
+# define PROT_READ 0
+# endif
+# ifndef PROT_WRITE
+# define PROT_WRITE 0
+# endif
+# ifndef MAP_PRIVATE
+# define MAP_PRIVATE 0
+# endif
+# ifndef MAP_ANONYMOUS
+# define MAP_ANONYMOUS 0
+# endif
+# ifndef MAP_SHARED
+# define MAP_SHARED 0
+# endif
+
+# ifndef ENOSYS
+# define ENOSYS EINVAL
+# endif
+
+static void *
+gold_mmap(void *, size_t, int, int, int, off_t)
+{
+ errno = ENOSYS;
+ return MAP_FAILED;
+}
+
+static int
+gold_munmap(void *, size_t)
+{
+ errno = ENOSYS;
+ return -1;
+}
+
+static void *
+gold_mremap(void *, size_t, size_t, int)
+{
+ errno = ENOSYS;
+ return MAP_FAILED;
+}
+
+#endif
+
+#if defined(HAVE_MMAP) && !defined(HAVE_MREMAP)
+# define mremap gold_mremap
+extern "C" void *gold_mremap(void *, size_t, size_t, int);
+#endif
+
// Some BSD systems still use MAP_ANON instead of MAP_ANONYMOUS
#ifndef MAP_ANONYMOUS
# define MAP_ANONYMOUS MAP_ANON
#endif
-#ifndef HAVE_POSIX_FALLOCATE
-// A dummy, non general, version of posix_fallocate. Here we just set
-// the file size and hope that there is enough disk space. FIXME: We
-// could allocate disk space by walking block by block and writing a
-// zero byte into each block.
-static int
-posix_fallocate(int o, off_t offset, off_t len)
-{
- return ftruncate(o, offset + len);
-}
-#endif // !defined(HAVE_POSIX_FALLOCATE)
+#ifndef MREMAP_MAYMOVE
+# define MREMAP_MAYMOVE 1
+#endif
+
+// Mingw does not have S_ISLNK.
+#ifndef S_ISLNK
+# define S_ISLNK(mode) 0
+#endif
namespace gold
{
+// A wrapper around posix_fallocate. If we don't have posix_fallocate,
+// or the --no-posix-fallocate option is set, we try the fallocate
+// system call directly. If that fails, we use ftruncate to set
+// the file size and hope that there is enough disk space.
+
+static int
+gold_fallocate(int o, off_t offset, off_t len)
+{
+#ifdef HAVE_POSIX_FALLOCATE
+ if (parameters->options().posix_fallocate())
+ return ::posix_fallocate(o, offset, len);
+#endif // defined(HAVE_POSIX_FALLOCATE)
+#ifdef HAVE_FALLOCATE
+ if (::fallocate(o, 0, offset, len) == 0)
+ return 0;
+#endif // defined(HAVE_FALLOCATE)
+ if (::ftruncate(o, offset + len) < 0)
+ return errno;
+ return 0;
+}
+
// Output_data variables.
bool Output_data::allocated_sizes_are_fixed;
else
oshdr.put_sh_link(shstrndx);
- oshdr.put_sh_info(0);
+ size_t segment_count = this->segment_list_->size();
+ oshdr.put_sh_info(segment_count >= elfcpp::PN_XNUM ? segment_count : 0);
+
oshdr.put_sh_addralign(0);
oshdr.put_sh_entsize(0);
}
const Layout::Segment_list& segment_list)
: segment_list_(segment_list)
{
+ this->set_current_data_size_for_child(this->do_size());
}
void
// Output_file_header methods.
-Output_file_header::Output_file_header(const Target* target,
+Output_file_header::Output_file_header(Target* target,
const Symbol_table* symtab,
- const Output_segment_headers* osh,
- const char* entry)
+ const Output_segment_headers* osh)
: target_(target),
symtab_(symtab),
segment_header_(osh),
section_header_(NULL),
- shstrtab_(NULL),
- entry_(entry)
+ shstrtab_(NULL)
{
this->set_data_size(this->do_size());
}
}
}
-// Write out the file header with appropriate size and endianess.
+// Write out the file header with appropriate size and endianness.
template<int size, bool big_endian>
void
oehdr.put_e_phoff(this->segment_header_->offset());
oehdr.put_e_shoff(this->section_header_->offset());
-
- // FIXME: The target needs to set the flags.
- oehdr.put_e_flags(0);
-
+ oehdr.put_e_flags(this->target_->processor_specific_flags());
oehdr.put_e_ehsize(elfcpp::Elf_sizes<size>::ehdr_size);
if (this->segment_header_ == NULL)
else
{
oehdr.put_e_phentsize(elfcpp::Elf_sizes<size>::phdr_size);
- oehdr.put_e_phnum(this->segment_header_->data_size()
- / elfcpp::Elf_sizes<size>::phdr_size);
+ size_t phnum = (this->segment_header_->data_size()
+ / elfcpp::Elf_sizes<size>::phdr_size);
+ if (phnum > elfcpp::PN_XNUM)
+ phnum = elfcpp::PN_XNUM;
+ oehdr.put_e_phnum(phnum);
}
oehdr.put_e_shentsize(elfcpp::Elf_sizes<size>::shdr_size);
// Let the target adjust the ELF header, e.g., to set EI_OSABI in
// the e_ident field.
- parameters->target().adjust_elf_header(view, ehdr_size);
+ this->target_->adjust_elf_header(view, ehdr_size);
of->write_output_view(0, ehdr_size, view);
}
-// Return the value to use for the entry address. THIS->ENTRY_ is the
-// symbol specified on the command line, if any.
+// Return the value to use for the entry address.
template<int size>
typename elfcpp::Elf_types<size>::Elf_Addr
Output_file_header::entry()
{
- const bool should_issue_warning = (this->entry_ != NULL
+ const bool should_issue_warning = (parameters->options().entry() != NULL
&& !parameters->options().relocatable()
- && !parameters->options().shared());
-
- // FIXME: Need to support target specific entry symbol.
- const char* entry = this->entry_;
- if (entry == NULL)
- entry = "_start";
-
+ && !parameters->options().shared());
+ const char* entry = parameters->entry();
Symbol* sym = this->symtab_->lookup(entry);
typename Sized_symbol<size>::Value_type v;
unsigned int type,
Output_data* od,
Address address,
- bool is_relative)
+ bool is_relative,
+ bool is_symbolless,
+ bool use_plt_offset)
: address_(address), local_sym_index_(GSYM_CODE), type_(type),
- is_relative_(is_relative), is_section_symbol_(false), shndx_(INVALID_CODE)
+ is_relative_(is_relative), is_symbolless_(is_symbolless),
+ is_section_symbol_(false), use_plt_offset_(use_plt_offset), shndx_(INVALID_CODE)
{
// this->type_ is a bitfield; make sure TYPE fits.
gold_assert(this->type_ == type);
Sized_relobj<size, big_endian>* relobj,
unsigned int shndx,
Address address,
- bool is_relative)
+ bool is_relative,
+ bool is_symbolless,
+ bool use_plt_offset)
: address_(address), local_sym_index_(GSYM_CODE), type_(type),
- is_relative_(is_relative), is_section_symbol_(false), shndx_(shndx)
+ is_relative_(is_relative), is_symbolless_(is_symbolless),
+ is_section_symbol_(false), use_plt_offset_(use_plt_offset), shndx_(shndx)
{
gold_assert(shndx != INVALID_CODE);
// this->type_ is a bitfield; make sure TYPE fits.
Output_data* od,
Address address,
bool is_relative,
- bool is_section_symbol)
+ bool is_symbolless,
+ bool is_section_symbol,
+ bool use_plt_offset)
: address_(address), local_sym_index_(local_sym_index), type_(type),
- is_relative_(is_relative), is_section_symbol_(is_section_symbol),
+ is_relative_(is_relative), is_symbolless_(is_symbolless),
+ is_section_symbol_(is_section_symbol), use_plt_offset_(use_plt_offset),
shndx_(INVALID_CODE)
{
gold_assert(local_sym_index != GSYM_CODE
- && local_sym_index != INVALID_CODE);
+ && local_sym_index != INVALID_CODE);
// this->type_ is a bitfield; make sure TYPE fits.
gold_assert(this->type_ == type);
this->u1_.relobj = relobj;
unsigned int shndx,
Address address,
bool is_relative,
- bool is_section_symbol)
+ bool is_symbolless,
+ bool is_section_symbol,
+ bool use_plt_offset)
: address_(address), local_sym_index_(local_sym_index), type_(type),
- is_relative_(is_relative), is_section_symbol_(is_section_symbol),
+ is_relative_(is_relative), is_symbolless_(is_symbolless),
+ is_section_symbol_(is_section_symbol), use_plt_offset_(use_plt_offset),
shndx_(shndx)
{
gold_assert(local_sym_index != GSYM_CODE
- && local_sym_index != INVALID_CODE);
+ && local_sym_index != INVALID_CODE);
gold_assert(shndx != INVALID_CODE);
// this->type_ is a bitfield; make sure TYPE fits.
gold_assert(this->type_ == type);
Output_section* os,
unsigned int type,
Output_data* od,
- Address address)
+ Address address,
+ bool is_relative)
: address_(address), local_sym_index_(SECTION_CODE), type_(type),
- is_relative_(false), is_section_symbol_(true), shndx_(INVALID_CODE)
+ is_relative_(is_relative), is_symbolless_(is_relative),
+ is_section_symbol_(true), use_plt_offset_(false), shndx_(INVALID_CODE)
{
// this->type_ is a bitfield; make sure TYPE fits.
gold_assert(this->type_ == type);
unsigned int type,
Sized_relobj<size, big_endian>* relobj,
unsigned int shndx,
- Address address)
+ Address address,
+ bool is_relative)
: address_(address), local_sym_index_(SECTION_CODE), type_(type),
- is_relative_(false), is_section_symbol_(true), shndx_(shndx)
+ is_relative_(is_relative), is_symbolless_(is_relative),
+ is_section_symbol_(true), use_plt_offset_(false), shndx_(shndx)
{
gold_assert(shndx != INVALID_CODE);
// this->type_ is a bitfield; make sure TYPE fits.
os->set_needs_symtab_index();
}
+// An absolute or relative relocation.
+
+template<bool dynamic, int size, bool big_endian>
+Output_reloc<elfcpp::SHT_REL, dynamic, size, big_endian>::Output_reloc(
+ unsigned int type,
+ Output_data* od,
+ Address address,
+ bool is_relative)
+ : address_(address), local_sym_index_(0), type_(type),
+ is_relative_(is_relative), is_symbolless_(false),
+ is_section_symbol_(false), use_plt_offset_(false), shndx_(INVALID_CODE)
+{
+ // this->type_ is a bitfield; make sure TYPE fits.
+ gold_assert(this->type_ == type);
+ this->u1_.relobj = NULL;
+ this->u2_.od = od;
+}
+
+template<bool dynamic, int size, bool big_endian>
+Output_reloc<elfcpp::SHT_REL, dynamic, size, big_endian>::Output_reloc(
+ unsigned int type,
+ Sized_relobj<size, big_endian>* relobj,
+ unsigned int shndx,
+ Address address,
+ bool is_relative)
+ : address_(address), local_sym_index_(0), type_(type),
+ is_relative_(is_relative), is_symbolless_(false),
+ is_section_symbol_(false), use_plt_offset_(false), shndx_(shndx)
+{
+ gold_assert(shndx != INVALID_CODE);
+ // this->type_ is a bitfield; make sure TYPE fits.
+ gold_assert(this->type_ == type);
+ this->u1_.relobj = NULL;
+ this->u2_.relobj = relobj;
+}
+
+// A target specific relocation.
+
+template<bool dynamic, int size, bool big_endian>
+Output_reloc<elfcpp::SHT_REL, dynamic, size, big_endian>::Output_reloc(
+ unsigned int type,
+ void* arg,
+ Output_data* od,
+ Address address)
+ : address_(address), local_sym_index_(TARGET_CODE), type_(type),
+ is_relative_(false), is_symbolless_(false),
+ is_section_symbol_(false), use_plt_offset_(false), shndx_(INVALID_CODE)
+{
+ // this->type_ is a bitfield; make sure TYPE fits.
+ gold_assert(this->type_ == type);
+ this->u1_.arg = arg;
+ this->u2_.od = od;
+}
+
+template<bool dynamic, int size, bool big_endian>
+Output_reloc<elfcpp::SHT_REL, dynamic, size, big_endian>::Output_reloc(
+ unsigned int type,
+ void* arg,
+ Sized_relobj<size, big_endian>* relobj,
+ unsigned int shndx,
+ Address address)
+ : address_(address), local_sym_index_(TARGET_CODE), type_(type),
+ is_relative_(false), is_symbolless_(false),
+ is_section_symbol_(false), use_plt_offset_(false), shndx_(shndx)
+{
+ gold_assert(shndx != INVALID_CODE);
+ // this->type_ is a bitfield; make sure TYPE fits.
+ gold_assert(this->type_ == type);
+ this->u1_.arg = arg;
+ this->u2_.relobj = relobj;
+}
+
// Record that we need a dynamic symbol index for this relocation.
template<bool dynamic, int size, bool big_endian>
Output_reloc<elfcpp::SHT_REL, dynamic, size, big_endian>::
set_needs_dynsym_index()
{
- if (this->is_relative_)
+ if (this->is_symbolless_)
return;
switch (this->local_sym_index_)
{
this->u1_.os->set_needs_dynsym_index();
break;
+ case TARGET_CODE:
+ // The target must take care of this if necessary.
+ break;
+
case 0:
break;
default:
{
- const unsigned int lsi = this->local_sym_index_;
- if (!this->is_section_symbol_)
- this->u1_.relobj->set_needs_output_dynsym_entry(lsi);
- else
- this->u1_.relobj->output_section(lsi)->set_needs_dynsym_index();
+ const unsigned int lsi = this->local_sym_index_;
+ Sized_relobj_file<size, big_endian>* relobj =
+ this->u1_.relobj->sized_relobj();
+ gold_assert(relobj != NULL);
+ if (!this->is_section_symbol_)
+ relobj->set_needs_output_dynsym_entry(lsi);
+ else
+ relobj->output_section(lsi)->set_needs_dynsym_index();
}
break;
}
const
{
unsigned int index;
+ if (this->is_symbolless_)
+ return 0;
switch (this->local_sym_index_)
{
case INVALID_CODE:
index = this->u1_.os->symtab_index();
break;
+ case TARGET_CODE:
+ index = parameters->target().reloc_symbol_index(this->u1_.arg,
+ this->type_);
+ break;
+
case 0:
// Relocations without symbols use a symbol index of 0.
index = 0;
default:
{
- const unsigned int lsi = this->local_sym_index_;
- if (!this->is_section_symbol_)
- {
- if (dynamic)
- index = this->u1_.relobj->dynsym_index(lsi);
- else
- index = this->u1_.relobj->symtab_index(lsi);
- }
- else
- {
- Output_section* os = this->u1_.relobj->output_section(lsi);
- gold_assert(os != NULL);
- if (dynamic)
- index = os->dynsym_index();
- else
- index = os->symtab_index();
- }
+ const unsigned int lsi = this->local_sym_index_;
+ Sized_relobj_file<size, big_endian>* relobj =
+ this->u1_.relobj->sized_relobj();
+ gold_assert(relobj != NULL);
+ if (!this->is_section_symbol_)
+ {
+ if (dynamic)
+ index = relobj->dynsym_index(lsi);
+ else
+ index = relobj->symtab_index(lsi);
+ }
+ else
+ {
+ Output_section* os = relobj->output_section(lsi);
+ gold_assert(os != NULL);
+ if (dynamic)
+ index = os->dynsym_index();
+ else
+ index = os->symtab_index();
+ }
}
break;
}
local_section_offset(Addend addend) const
{
gold_assert(this->local_sym_index_ != GSYM_CODE
- && this->local_sym_index_ != SECTION_CODE
- && this->local_sym_index_ != INVALID_CODE
- && this->is_section_symbol_);
+ && this->local_sym_index_ != SECTION_CODE
+ && this->local_sym_index_ != TARGET_CODE
+ && this->local_sym_index_ != INVALID_CODE
+ && this->local_sym_index_ != 0
+ && this->is_section_symbol_);
const unsigned int lsi = this->local_sym_index_;
Output_section* os = this->u1_.relobj->output_section(lsi);
gold_assert(os != NULL);
if (offset != invalid_address)
return offset + addend;
// This is a merge section.
- offset = os->output_address(this->u1_.relobj, lsi, addend);
+ Sized_relobj_file<size, big_endian>* relobj =
+ this->u1_.relobj->sized_relobj();
+ gold_assert(relobj != NULL);
+ offset = os->output_address(relobj, lsi, addend);
gold_assert(offset != invalid_address);
return offset;
}
address += os->address() + off;
else
{
- address = os->output_address(this->u2_.relobj, this->shndx_,
- address);
+ Sized_relobj_file<size, big_endian>* relobj =
+ this->u2_.relobj->sized_relobj();
+ gold_assert(relobj != NULL);
+ address = os->output_address(relobj, this->shndx_, address);
gold_assert(address != invalid_address);
}
}
Write_rel* wr) const
{
wr->put_r_offset(this->get_address());
- unsigned int sym_index = this->is_relative_ ? 0 : this->get_symbol_index();
+ unsigned int sym_index = this->get_symbol_index();
wr->put_r_info(elfcpp::elf_r_info<size>(sym_index, this->type_));
}
{
const Sized_symbol<size>* sym;
sym = static_cast<const Sized_symbol<size>*>(this->u1_.gsym);
- return sym->value() + addend;
+ if (this->use_plt_offset_ && sym->has_plt_offset())
+ return parameters->target().plt_address_for_global(sym);
+ else
+ return sym->value() + addend;
+ }
+ if (this->local_sym_index_ == SECTION_CODE)
+ {
+ gold_assert(!this->use_plt_offset_);
+ return this->u1_.os->address() + addend;
}
- gold_assert(this->local_sym_index_ != SECTION_CODE
- && this->local_sym_index_ != INVALID_CODE
- && !this->is_section_symbol_);
+ gold_assert(this->local_sym_index_ != TARGET_CODE
+ && this->local_sym_index_ != INVALID_CODE
+ && this->local_sym_index_ != 0
+ && !this->is_section_symbol_);
const unsigned int lsi = this->local_sym_index_;
- const Symbol_value<size>* symval = this->u1_.relobj->local_symbol(lsi);
- return symval->value(this->u1_.relobj, addend);
+ Sized_relobj_file<size, big_endian>* relobj =
+ this->u1_.relobj->sized_relobj();
+ gold_assert(relobj != NULL);
+ if (this->use_plt_offset_)
+ return parameters->target().plt_address_for_local(relobj, lsi);
+ const Symbol_value<size>* symval = relobj->local_symbol(lsi);
+ return symval->value(relobj, addend);
}
// Reloc comparison. This function sorts the dynamic relocs for the
elfcpp::Rela_write<size, big_endian> orel(pov);
this->rel_.write_rel(&orel);
Addend addend = this->addend_;
- if (this->rel_.is_relative())
+ if (this->rel_.is_target_specific())
+ addend = parameters->target().reloc_addend(this->rel_.target_arg(),
+ this->rel_.type(), addend);
+ else if (this->rel_.is_symbolless())
addend = this->rel_.symbol_value(addend);
else if (this->rel_.is_local_section_symbol())
addend = this->rel_.local_section_offset(addend);
os->set_entsize(elfcpp::Elf_sizes<size>::rela_size);
else
gold_unreachable();
- if (dynamic)
- os->set_should_link_to_dynsym();
- else
+
+ // A STT_GNU_IFUNC symbol may require a IRELATIVE reloc when doing a
+ // static link. The backends will generate a dynamic reloc section
+ // to hold this. In that case we don't want to link to the dynsym
+ // section, because there isn't one.
+ if (!dynamic)
os->set_should_link_to_symtab();
+ else if (parameters->doing_static_link())
+ ;
+ else
+ os->set_should_link_to_dynsym();
}
// Write out relocation data.
const off_t oview_size = this->data_size();
unsigned char* const oview = of->get_output_view(off, oview_size);
- if (this->sort_relocs_)
+ if (this->sort_relocs())
{
gold_assert(dynamic);
std::sort(this->relocs_.begin(), this->relocs_.end(),
template<int size, bool big_endian>
Output_data_group<size, big_endian>::Output_data_group(
- Sized_relobj<size, big_endian>* relobj,
+ Sized_relobj_file<size, big_endian>* relobj,
section_size_type entry_count,
elfcpp::Elf_Word flags,
std::vector<unsigned int>* input_shndxes)
// Write out the entry.
-template<int size, bool big_endian>
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::Got_entry::write(unsigned char* pov) const
+Output_data_got<got_size, big_endian>::Got_entry::write(
+ unsigned int got_indx,
+ unsigned char* pov) const
{
Valtype val = 0;
// link-time value, which will be relocated dynamically by a
// RELATIVE relocation.
Symbol* gsym = this->u_.gsym;
- Sized_symbol<size>* sgsym;
- // This cast is a bit ugly. We don't want to put a
- // virtual method in Symbol, because we want Symbol to be
- // as small as possible.
- sgsym = static_cast<Sized_symbol<size>*>(gsym);
- val = sgsym->value();
+ if (this->use_plt_or_tls_offset_ && gsym->has_plt_offset())
+ val = parameters->target().plt_address_for_global(gsym);
+ else
+ {
+ switch (parameters->size_and_endianness())
+ {
+#if defined(HAVE_TARGET_32_LITTLE) || defined(HAVE_TARGET_32_BIG)
+ case Parameters::TARGET_32_LITTLE:
+ case Parameters::TARGET_32_BIG:
+ {
+ // This cast is ugly. We don't want to put a
+ // virtual method in Symbol, because we want Symbol
+ // to be as small as possible.
+ Sized_symbol<32>::Value_type v;
+ v = static_cast<Sized_symbol<32>*>(gsym)->value();
+ val = convert_types<Valtype, Sized_symbol<32>::Value_type>(v);
+ }
+ break;
+#endif
+#if defined(HAVE_TARGET_64_LITTLE) || defined(HAVE_TARGET_64_BIG)
+ case Parameters::TARGET_64_LITTLE:
+ case Parameters::TARGET_64_BIG:
+ {
+ Sized_symbol<64>::Value_type v;
+ v = static_cast<Sized_symbol<64>*>(gsym)->value();
+ val = convert_types<Valtype, Sized_symbol<64>::Value_type>(v);
+ }
+ break;
+#endif
+ default:
+ gold_unreachable();
+ }
+ if (this->use_plt_or_tls_offset_
+ && gsym->type() == elfcpp::STT_TLS)
+ val += parameters->target().tls_offset_for_global(gsym,
+ got_indx);
+ }
}
break;
val = this->u_.constant;
break;
+ case RESERVED_CODE:
+ // If we're doing an incremental update, don't touch this GOT entry.
+ if (parameters->incremental_update())
+ return;
+ val = this->u_.constant;
+ break;
+
default:
{
- const unsigned int lsi = this->local_sym_index_;
- const Symbol_value<size>* symval = this->u_.object->local_symbol(lsi);
- val = symval->value(this->u_.object, 0);
+ const Relobj* object = this->u_.object;
+ const unsigned int lsi = this->local_sym_index_;
+ bool is_tls = object->local_is_tls(lsi);
+ if (this->use_plt_or_tls_offset_ && !is_tls)
+ val = parameters->target().plt_address_for_local(object, lsi);
+ else
+ {
+ uint64_t lval = object->local_symbol_value(lsi, 0);
+ val = convert_types<Valtype, uint64_t>(lval);
+ if (this->use_plt_or_tls_offset_ && is_tls)
+ val += parameters->target().tls_offset_for_local(object, lsi,
+ got_indx);
+ }
}
break;
}
- elfcpp::Swap<size, big_endian>::writeval(pov, val);
+ elfcpp::Swap<got_size, big_endian>::writeval(pov, val);
}
// Output_data_got methods.
// this is a new GOT entry, false if the symbol already had a GOT
// entry.
-template<int size, bool big_endian>
+template<int got_size, bool big_endian>
bool
-Output_data_got<size, big_endian>::add_global(
+Output_data_got<got_size, big_endian>::add_global(
Symbol* gsym,
unsigned int got_type)
{
if (gsym->has_got_offset(got_type))
return false;
- this->entries_.push_back(Got_entry(gsym));
- this->set_got_size();
- gsym->set_got_offset(got_type, this->last_got_offset());
+ unsigned int got_offset = this->add_got_entry(Got_entry(gsym, false));
+ gsym->set_got_offset(got_type, got_offset);
return true;
}
-// Add an entry for a global symbol to the GOT, and add a dynamic
-// relocation of type R_TYPE for the GOT entry.
-template<int size, bool big_endian>
-void
-Output_data_got<size, big_endian>::add_global_with_rel(
- Symbol* gsym,
- unsigned int got_type,
- Rel_dyn* rel_dyn,
- unsigned int r_type)
+// Like add_global, but use the PLT offset.
+
+template<int got_size, bool big_endian>
+bool
+Output_data_got<got_size, big_endian>::add_global_plt(Symbol* gsym,
+ unsigned int got_type)
{
if (gsym->has_got_offset(got_type))
- return;
+ return false;
- this->entries_.push_back(Got_entry());
- this->set_got_size();
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset = this->add_got_entry(Got_entry(gsym, true));
gsym->set_got_offset(got_type, got_offset);
- rel_dyn->add_global(gsym, r_type, this, got_offset);
+ return true;
}
-template<int size, bool big_endian>
+// Add an entry for a global symbol to the GOT, and add a dynamic
+// relocation of type R_TYPE for the GOT entry.
+
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::add_global_with_rela(
+Output_data_got<got_size, big_endian>::add_global_with_rel(
Symbol* gsym,
unsigned int got_type,
- Rela_dyn* rela_dyn,
+ Output_data_reloc_generic* rel_dyn,
unsigned int r_type)
{
if (gsym->has_got_offset(got_type))
return;
- this->entries_.push_back(Got_entry());
- this->set_got_size();
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset = this->add_got_entry(Got_entry());
gsym->set_got_offset(got_type, got_offset);
- rela_dyn->add_global(gsym, r_type, this, got_offset, 0);
+ rel_dyn->add_global_generic(gsym, r_type, this, got_offset, 0);
}
// Add a pair of entries for a global symbol to the GOT, and add
// dynamic relocations of type R_TYPE_1 and R_TYPE_2, respectively.
// If R_TYPE_2 == 0, add the second entry with no relocation.
-template<int size, bool big_endian>
-void
-Output_data_got<size, big_endian>::add_global_pair_with_rel(
- Symbol* gsym,
- unsigned int got_type,
- Rel_dyn* rel_dyn,
- unsigned int r_type_1,
- unsigned int r_type_2)
-{
- if (gsym->has_got_offset(got_type))
- return;
-
- this->entries_.push_back(Got_entry());
- unsigned int got_offset = this->last_got_offset();
- gsym->set_got_offset(got_type, got_offset);
- rel_dyn->add_global(gsym, r_type_1, this, got_offset);
-
- this->entries_.push_back(Got_entry());
- if (r_type_2 != 0)
- {
- got_offset = this->last_got_offset();
- rel_dyn->add_global(gsym, r_type_2, this, got_offset);
- }
-
- this->set_got_size();
-}
-
-template<int size, bool big_endian>
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::add_global_pair_with_rela(
+Output_data_got<got_size, big_endian>::add_global_pair_with_rel(
Symbol* gsym,
unsigned int got_type,
- Rela_dyn* rela_dyn,
+ Output_data_reloc_generic* rel_dyn,
unsigned int r_type_1,
unsigned int r_type_2)
{
if (gsym->has_got_offset(got_type))
return;
- this->entries_.push_back(Got_entry());
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset = this->add_got_entry_pair(Got_entry(), Got_entry());
gsym->set_got_offset(got_type, got_offset);
- rela_dyn->add_global(gsym, r_type_1, this, got_offset, 0);
+ rel_dyn->add_global_generic(gsym, r_type_1, this, got_offset, 0);
- this->entries_.push_back(Got_entry());
if (r_type_2 != 0)
- {
- got_offset = this->last_got_offset();
- rela_dyn->add_global(gsym, r_type_2, this, got_offset, 0);
- }
-
- this->set_got_size();
+ rel_dyn->add_global_generic(gsym, r_type_2, this,
+ got_offset + got_size / 8, 0);
}
// Add an entry for a local symbol to the GOT. This returns true if
// this is a new GOT entry, false if the symbol already has a GOT
// entry.
-template<int size, bool big_endian>
+template<int got_size, bool big_endian>
bool
-Output_data_got<size, big_endian>::add_local(
- Sized_relobj<size, big_endian>* object,
+Output_data_got<got_size, big_endian>::add_local(
+ Relobj* object,
unsigned int symndx,
unsigned int got_type)
{
if (object->local_has_got_offset(symndx, got_type))
return false;
- this->entries_.push_back(Got_entry(object, symndx));
- this->set_got_size();
- object->set_local_got_offset(symndx, got_type, this->last_got_offset());
+ unsigned int got_offset = this->add_got_entry(Got_entry(object, symndx,
+ false));
+ object->set_local_got_offset(symndx, got_type, got_offset);
return true;
}
-// Add an entry for a local symbol to the GOT, and add a dynamic
-// relocation of type R_TYPE for the GOT entry.
-template<int size, bool big_endian>
-void
-Output_data_got<size, big_endian>::add_local_with_rel(
- Sized_relobj<size, big_endian>* object,
+// Like add_local, but use the PLT offset.
+
+template<int got_size, bool big_endian>
+bool
+Output_data_got<got_size, big_endian>::add_local_plt(
+ Relobj* object,
unsigned int symndx,
- unsigned int got_type,
- Rel_dyn* rel_dyn,
- unsigned int r_type)
+ unsigned int got_type)
{
if (object->local_has_got_offset(symndx, got_type))
- return;
+ return false;
- this->entries_.push_back(Got_entry());
- this->set_got_size();
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset = this->add_got_entry(Got_entry(object, symndx,
+ true));
object->set_local_got_offset(symndx, got_type, got_offset);
- rel_dyn->add_local(object, symndx, r_type, this, got_offset);
+ return true;
}
-template<int size, bool big_endian>
+// Add an entry for a local symbol to the GOT, and add a dynamic
+// relocation of type R_TYPE for the GOT entry.
+
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::add_local_with_rela(
- Sized_relobj<size, big_endian>* object,
+Output_data_got<got_size, big_endian>::add_local_with_rel(
+ Relobj* object,
unsigned int symndx,
unsigned int got_type,
- Rela_dyn* rela_dyn,
+ Output_data_reloc_generic* rel_dyn,
unsigned int r_type)
{
if (object->local_has_got_offset(symndx, got_type))
return;
- this->entries_.push_back(Got_entry());
- this->set_got_size();
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset = this->add_got_entry(Got_entry());
object->set_local_got_offset(symndx, got_type, got_offset);
- rela_dyn->add_local(object, symndx, r_type, this, got_offset, 0);
+ rel_dyn->add_local_generic(object, symndx, r_type, this, got_offset, 0);
}
// Add a pair of entries for a local symbol to the GOT, and add
-// dynamic relocations of type R_TYPE_1 and R_TYPE_2, respectively.
-// If R_TYPE_2 == 0, add the second entry with no relocation.
-template<int size, bool big_endian>
+// a dynamic relocation of type R_TYPE using the section symbol of
+// the output section to which input section SHNDX maps, on the first.
+// The first got entry will have a value of zero, the second the
+// value of the local symbol.
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::add_local_pair_with_rel(
- Sized_relobj<size, big_endian>* object,
+Output_data_got<got_size, big_endian>::add_local_pair_with_rel(
+ Relobj* object,
unsigned int symndx,
unsigned int shndx,
unsigned int got_type,
- Rel_dyn* rel_dyn,
- unsigned int r_type_1,
- unsigned int r_type_2)
+ Output_data_reloc_generic* rel_dyn,
+ unsigned int r_type)
{
if (object->local_has_got_offset(symndx, got_type))
return;
- this->entries_.push_back(Got_entry());
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset =
+ this->add_got_entry_pair(Got_entry(),
+ Got_entry(object, symndx, false));
object->set_local_got_offset(symndx, got_type, got_offset);
Output_section* os = object->output_section(shndx);
- rel_dyn->add_output_section(os, r_type_1, this, got_offset);
-
- this->entries_.push_back(Got_entry(object, symndx));
- if (r_type_2 != 0)
- {
- got_offset = this->last_got_offset();
- rel_dyn->add_output_section(os, r_type_2, this, got_offset);
- }
-
- this->set_got_size();
+ rel_dyn->add_output_section_generic(os, r_type, this, got_offset, 0);
}
-template<int size, bool big_endian>
+// Add a pair of entries for a local symbol to the GOT, and add
+// a dynamic relocation of type R_TYPE using STN_UNDEF on the first.
+// The first got entry will have a value of zero, the second the
+// value of the local symbol offset by Target::tls_offset_for_local.
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::add_local_pair_with_rela(
- Sized_relobj<size, big_endian>* object,
+Output_data_got<got_size, big_endian>::add_local_tls_pair(
+ Relobj* object,
unsigned int symndx,
- unsigned int shndx,
unsigned int got_type,
- Rela_dyn* rela_dyn,
- unsigned int r_type_1,
- unsigned int r_type_2)
+ Output_data_reloc_generic* rel_dyn,
+ unsigned int r_type)
{
if (object->local_has_got_offset(symndx, got_type))
return;
- this->entries_.push_back(Got_entry());
- unsigned int got_offset = this->last_got_offset();
+ unsigned int got_offset
+ = this->add_got_entry_pair(Got_entry(),
+ Got_entry(object, symndx, true));
object->set_local_got_offset(symndx, got_type, got_offset);
- Output_section* os = object->output_section(shndx);
- rela_dyn->add_output_section(os, r_type_1, this, got_offset, 0);
+ rel_dyn->add_local_generic(object, 0, r_type, this, got_offset, 0);
+}
- this->entries_.push_back(Got_entry(object, symndx));
- if (r_type_2 != 0)
- {
- got_offset = this->last_got_offset();
- rela_dyn->add_output_section(os, r_type_2, this, got_offset, 0);
- }
+// Reserve a slot in the GOT for a local symbol or the second slot of a pair.
+
+template<int got_size, bool big_endian>
+void
+Output_data_got<got_size, big_endian>::reserve_local(
+ unsigned int i,
+ Relobj* object,
+ unsigned int sym_index,
+ unsigned int got_type)
+{
+ this->do_reserve_slot(i);
+ object->set_local_got_offset(sym_index, got_type, this->got_offset(i));
+}
+
+// Reserve a slot in the GOT for a global symbol.
- this->set_got_size();
+template<int got_size, bool big_endian>
+void
+Output_data_got<got_size, big_endian>::reserve_global(
+ unsigned int i,
+ Symbol* gsym,
+ unsigned int got_type)
+{
+ this->do_reserve_slot(i);
+ gsym->set_got_offset(got_type, this->got_offset(i));
}
// Write out the GOT.
-template<int size, bool big_endian>
+template<int got_size, bool big_endian>
void
-Output_data_got<size, big_endian>::do_write(Output_file* of)
+Output_data_got<got_size, big_endian>::do_write(Output_file* of)
{
- const int add = size / 8;
+ const int add = got_size / 8;
const off_t off = this->offset();
const off_t oview_size = this->data_size();
unsigned char* const oview = of->get_output_view(off, oview_size);
unsigned char* pov = oview;
- for (typename Got_entries::const_iterator p = this->entries_.begin();
- p != this->entries_.end();
- ++p)
+ for (unsigned int i = 0; i < this->entries_.size(); ++i)
{
- p->write(pov);
+ this->entries_[i].write(i, pov);
pov += add;
}
this->entries_.clear();
}
+// Create a new GOT entry and return its offset.
+
+template<int got_size, bool big_endian>
+unsigned int
+Output_data_got<got_size, big_endian>::add_got_entry(Got_entry got_entry)
+{
+ if (!this->is_data_size_valid())
+ {
+ this->entries_.push_back(got_entry);
+ this->set_got_size();
+ return this->last_got_offset();
+ }
+ else
+ {
+ // For an incremental update, find an available slot.
+ off_t got_offset = this->free_list_.allocate(got_size / 8,
+ got_size / 8, 0);
+ if (got_offset == -1)
+ gold_fallback(_("out of patch space (GOT);"
+ " relink with --incremental-full"));
+ unsigned int got_index = got_offset / (got_size / 8);
+ gold_assert(got_index < this->entries_.size());
+ this->entries_[got_index] = got_entry;
+ return static_cast<unsigned int>(got_offset);
+ }
+}
+
+// Create a pair of new GOT entries and return the offset of the first.
+
+template<int got_size, bool big_endian>
+unsigned int
+Output_data_got<got_size, big_endian>::add_got_entry_pair(
+ Got_entry got_entry_1,
+ Got_entry got_entry_2)
+{
+ if (!this->is_data_size_valid())
+ {
+ unsigned int got_offset;
+ this->entries_.push_back(got_entry_1);
+ got_offset = this->last_got_offset();
+ this->entries_.push_back(got_entry_2);
+ this->set_got_size();
+ return got_offset;
+ }
+ else
+ {
+ // For an incremental update, find an available pair of slots.
+ off_t got_offset = this->free_list_.allocate(2 * got_size / 8,
+ got_size / 8, 0);
+ if (got_offset == -1)
+ gold_fallback(_("out of patch space (GOT);"
+ " relink with --incremental-full"));
+ unsigned int got_index = got_offset / (got_size / 8);
+ gold_assert(got_index < this->entries_.size());
+ this->entries_[got_index] = got_entry_1;
+ this->entries_[got_index + 1] = got_entry_2;
+ return static_cast<unsigned int>(got_offset);
+ }
+}
+
+// Replace GOT entry I with a new value.
+
+template<int got_size, bool big_endian>
+void
+Output_data_got<got_size, big_endian>::replace_got_entry(
+ unsigned int i,
+ Got_entry got_entry)
+{
+ gold_assert(i < this->entries_.size());
+ this->entries_[i] = got_entry;
+}
+
// Output_data_dynamic::Dynamic_entry methods.
// Write out the entry.
case DYNAMIC_SECTION_SIZE:
val = this->u_.od->data_size();
+ if (this->od2 != NULL)
+ val += this->od2->data_size();
break;
case DYNAMIC_SYMBOL:
{
// Add the terminating entry if it hasn't been added.
// Because of relaxation, we can run this multiple times.
- if (this->entries_.empty()
- || this->entries_.rbegin()->tag() != elfcpp::DT_NULL)
- this->add_constant(elfcpp::DT_NULL, 0);
+ if (this->entries_.empty() || this->entries_.back().tag() != elfcpp::DT_NULL)
+ {
+ int extra = parameters->options().spare_dynamic_tags();
+ for (int i = 0; i < extra; ++i)
+ this->add_constant(elfcpp::DT_NULL, 0);
+ this->add_constant(elfcpp::DT_NULL, 0);
+ }
int dyn_size;
if (parameters->target().get_size() == 32)
++p)
{
unsigned int symndx = p->first;
- gold_assert(symndx * 4 < this->data_size());
+ gold_assert(static_cast<off_t>(symndx) * 4 < this->data_size());
elfcpp::Swap<32, big_endian>::writeval(oview + symndx * 4, p->second);
}
}
+// Output_fill_debug_info methods.
+
+// Return the minimum size needed for a dummy compilation unit header.
+
+size_t
+Output_fill_debug_info::do_minimum_hole_size() const
+{
+ // Compile unit header fields: unit_length, version, debug_abbrev_offset,
+ // address_size.
+ const size_t len = 4 + 2 + 4 + 1;
+ // For type units, add type_signature, type_offset.
+ if (this->is_debug_types_)
+ return len + 8 + 4;
+ return len;
+}
+
+// Write a dummy compilation unit header to fill a hole in the
+// .debug_info or .debug_types section.
+
+void
+Output_fill_debug_info::do_write(Output_file* of, off_t off, size_t len) const
+{
+ gold_debug(DEBUG_INCREMENTAL, "fill_debug_info(%08lx, %08lx)",
+ static_cast<long>(off), static_cast<long>(len));
+
+ gold_assert(len >= this->do_minimum_hole_size());
+
+ unsigned char* const oview = of->get_output_view(off, len);
+ unsigned char* pov = oview;
+
+ // Write header fields: unit_length, version, debug_abbrev_offset,
+ // address_size.
+ if (this->is_big_endian())
+ {
+ elfcpp::Swap_unaligned<32, true>::writeval(pov, len - 4);
+ elfcpp::Swap_unaligned<16, true>::writeval(pov + 4, this->version);
+ elfcpp::Swap_unaligned<32, true>::writeval(pov + 6, 0);
+ }
+ else
+ {
+ elfcpp::Swap_unaligned<32, false>::writeval(pov, len - 4);
+ elfcpp::Swap_unaligned<16, false>::writeval(pov + 4, this->version);
+ elfcpp::Swap_unaligned<32, false>::writeval(pov + 6, 0);
+ }
+ pov += 4 + 2 + 4;
+ *pov++ = 4;
+
+ // For type units, the additional header fields -- type_signature,
+ // type_offset -- can be filled with zeroes.
+
+ // Fill the remainder of the free space with zeroes. The first
+ // zero should tell the consumer there are no DIEs to read in this
+ // compilation unit.
+ if (pov < oview + len)
+ memset(pov, 0, oview + len - pov);
+
+ of->write_output_view(off, len, oview);
+}
+
+// Output_fill_debug_line methods.
+
+// Return the minimum size needed for a dummy line number program header.
+
+size_t
+Output_fill_debug_line::do_minimum_hole_size() const
+{
+ // Line number program header fields: unit_length, version, header_length,
+ // minimum_instruction_length, default_is_stmt, line_base, line_range,
+ // opcode_base, standard_opcode_lengths[], include_directories, filenames.
+ const size_t len = 4 + 2 + 4 + this->header_length;
+ return len;
+}
+
+// Write a dummy line number program header to fill a hole in the
+// .debug_line section.
+
+void
+Output_fill_debug_line::do_write(Output_file* of, off_t off, size_t len) const
+{
+ gold_debug(DEBUG_INCREMENTAL, "fill_debug_line(%08lx, %08lx)",
+ static_cast<long>(off), static_cast<long>(len));
+
+ gold_assert(len >= this->do_minimum_hole_size());
+
+ unsigned char* const oview = of->get_output_view(off, len);
+ unsigned char* pov = oview;
+
+ // Write header fields: unit_length, version, header_length,
+ // minimum_instruction_length, default_is_stmt, line_base, line_range,
+ // opcode_base, standard_opcode_lengths[], include_directories, filenames.
+ // We set the header_length field to cover the entire hole, so the
+ // line number program is empty.
+ if (this->is_big_endian())
+ {
+ elfcpp::Swap_unaligned<32, true>::writeval(pov, len - 4);
+ elfcpp::Swap_unaligned<16, true>::writeval(pov + 4, this->version);
+ elfcpp::Swap_unaligned<32, true>::writeval(pov + 6, len - (4 + 2 + 4));
+ }
+ else
+ {
+ elfcpp::Swap_unaligned<32, false>::writeval(pov, len - 4);
+ elfcpp::Swap_unaligned<16, false>::writeval(pov + 4, this->version);
+ elfcpp::Swap_unaligned<32, false>::writeval(pov + 6, len - (4 + 2 + 4));
+ }
+ pov += 4 + 2 + 4;
+ *pov++ = 1; // minimum_instruction_length
+ *pov++ = 0; // default_is_stmt
+ *pov++ = 0; // line_base
+ *pov++ = 5; // line_range
+ *pov++ = 13; // opcode_base
+ *pov++ = 0; // standard_opcode_lengths[1]
+ *pov++ = 1; // standard_opcode_lengths[2]
+ *pov++ = 1; // standard_opcode_lengths[3]
+ *pov++ = 1; // standard_opcode_lengths[4]
+ *pov++ = 1; // standard_opcode_lengths[5]
+ *pov++ = 0; // standard_opcode_lengths[6]
+ *pov++ = 0; // standard_opcode_lengths[7]
+ *pov++ = 0; // standard_opcode_lengths[8]
+ *pov++ = 1; // standard_opcode_lengths[9]
+ *pov++ = 0; // standard_opcode_lengths[10]
+ *pov++ = 0; // standard_opcode_lengths[11]
+ *pov++ = 1; // standard_opcode_lengths[12]
+ *pov++ = 0; // include_directories (empty)
+ *pov++ = 0; // filenames (empty)
+
+ // Some consumers don't check the header_length field, and simply
+ // start reading the line number program immediately following the
+ // header. For those consumers, we fill the remainder of the free
+ // space with DW_LNS_set_basic_block opcodes. These are effectively
+ // no-ops: the resulting line table program will not create any rows.
+ if (pov < oview + len)
+ memset(pov, elfcpp::DW_LNS_set_basic_block, oview + len - pov);
+
+ of->write_output_view(off, len, oview);
+}
+
// Output_section::Input_section methods.
+// Return the current data size. For an input section we store the size here.
+// For an Output_section_data, we have to ask it for the size.
+
+off_t
+Output_section::Input_section::current_data_size() const
+{
+ if (this->is_input_section())
+ return this->u1_.data_size;
+ else
+ {
+ this->u2_.posd->pre_finalize_data_size();
+ return this->u2_.posd->current_data_size();
+ }
+}
+
// Return the data size. For an input section we store the size here.
// For an Output_section_data, we have to ask it for the size.
return this->u2_.posd->data_size();
}
+// Return the object for an input section.
+
+Relobj*
+Output_section::Input_section::relobj() const
+{
+ if (this->is_input_section())
+ return this->u2_.object;
+ else if (this->is_merge_section())
+ {
+ gold_assert(this->u2_.pomb->first_relobj() != NULL);
+ return this->u2_.pomb->first_relobj();
+ }
+ else if (this->is_relaxed_input_section())
+ return this->u2_.poris->relobj();
+ else
+ gold_unreachable();
+}
+
+// Return the input section index for an input section.
+
+unsigned int
+Output_section::Input_section::shndx() const
+{
+ if (this->is_input_section())
+ return this->shndx_;
+ else if (this->is_merge_section())
+ {
+ gold_assert(this->u2_.pomb->first_relobj() != NULL);
+ return this->u2_.pomb->first_shndx();
+ }
+ else if (this->is_relaxed_input_section())
+ return this->u2_.poris->shndx();
+ else
+ gold_unreachable();
+}
+
// Set the address and file offset.
void
const Relobj* object,
unsigned int shndx,
section_offset_type offset,
- section_offset_type *poutput) const
+ section_offset_type* poutput) const
{
if (!this->is_input_section())
return this->u2_.posd->output_offset(object, shndx, offset, poutput);
case RELAXED_INPUT_SECTION_CODE:
{
- Output_relaxed_input_section* relaxed_section =
+ Output_relaxed_input_section* relaxed_section =
this->relaxed_input_section();
- mapfile->print_input_section(relaxed_section->relobj(),
+ mapfile->print_input_section(relaxed_section->relobj(),
relaxed_section->shndx());
}
break;
info_(0),
type_(type),
flags_(flags),
+ order_(ORDER_INVALID),
out_shndx_(-1U),
symtab_index_(0),
dynsym_index_(0),
found_in_sections_clause_(false),
has_load_address_(false),
info_uses_section_index_(false),
+ input_section_order_specified_(false),
may_sort_attached_input_sections_(false),
must_sort_attached_input_sections_(false),
attached_input_sections_are_sorted_(false),
is_relro_(false),
- is_relro_local_(false),
is_small_section_(false),
is_large_section_(false),
+ generate_code_fills_at_write_(false),
+ is_entsize_zero_(false),
+ section_offsets_need_adjustment_(false),
+ is_noload_(false),
+ always_keeps_input_sections_(false),
+ has_fixed_layout_(false),
+ is_patch_space_allowed_(false),
+ is_unique_segment_(false),
tls_offset_(0),
+ extra_segment_flags_(0),
+ segment_alignment_(0),
checkpoint_(NULL),
- merge_section_map_(),
- merge_section_by_properties_map_(),
- relaxed_input_section_map_(),
- is_relaxed_input_section_map_valid_(true),
- generate_code_fills_at_write_(false)
+ lookup_maps_(new Output_section_lookup_maps),
+ free_list_(),
+ free_space_fill_(NULL),
+ patch_space_(0)
{
// An unallocated section has no address. Forcing this means that
// we don't need special treatment for symbols defined in debug
void
Output_section::set_entsize(uint64_t v)
{
- if (this->entsize_ == 0)
+ if (this->is_entsize_zero_)
+ ;
+ else if (this->entsize_ == 0)
this->entsize_ = v;
- else
- gold_assert(this->entsize_ == v);
+ else if (this->entsize_ != v)
+ {
+ this->entsize_ = 0;
+ this->is_entsize_zero_ = 1;
+ }
}
// Add the input section SHNDX, with header SHDR, named SECNAME, in
template<int size, bool big_endian>
off_t
-Output_section::add_input_section(Sized_relobj<size, big_endian>* object,
+Output_section::add_input_section(Layout* layout,
+ Sized_relobj_file<size, big_endian>* object,
unsigned int shndx,
const char* secname,
const elfcpp::Shdr<size, big_endian>& shdr,
this->addralign_ = addralign;
typename elfcpp::Elf_types<size>::Elf_WXword sh_flags = shdr.get_sh_flags();
- this->update_flags_for_input_section(sh_flags);
-
uint64_t entsize = shdr.get_sh_entsize();
// .debug_str is a mergeable string section, but is not always so
entsize = 1;
}
+ this->update_flags_for_input_section(sh_flags);
+ this->set_entsize(entsize);
+
// If this is a SHF_MERGE section, we pass all the input sections to
// a Output_data_merge. We don't try to handle relocations for such
// a section. We don't try to handle empty merge sections--they
// mess up the mappings, and are useless anyhow.
+ // FIXME: Need to handle merge sections during incremental update.
if ((sh_flags & elfcpp::SHF_MERGE) != 0
&& reloc_shndx == 0
- && shdr.get_sh_size() > 0)
+ && shdr.get_sh_size() > 0
+ && !parameters->incremental())
{
- if (this->add_merge_input_section(object, shndx, sh_flags,
- entsize, addralign))
+ // Keep information about merged input sections for rebuilding fast
+ // lookup maps if we have sections-script or we do relaxation.
+ bool keeps_input_sections = (this->always_keeps_input_sections_
+ || have_sections_script
+ || parameters->target().may_relax());
+
+ if (this->add_merge_input_section(object, shndx, sh_flags, entsize,
+ addralign, keeps_input_sections))
{
// Tell the relocation routines that they need to call the
// output_offset method to determine the final address.
}
}
- off_t offset_in_section = this->current_data_size_for_child();
+ section_size_type input_section_size = shdr.get_sh_size();
+ section_size_type uncompressed_size;
+ if (object->section_is_compressed(shndx, &uncompressed_size))
+ input_section_size = uncompressed_size;
+
+ off_t offset_in_section;
+
+ if (this->has_fixed_layout())
+ {
+ // For incremental updates, find a chunk of unused space in the section.
+ offset_in_section = this->free_list_.allocate(input_section_size,
+ addralign, 0);
+ if (offset_in_section == -1)
+ gold_fallback(_("out of patch space in section %s; "
+ "relink with --incremental-full"),
+ this->name());
+ return offset_in_section;
+ }
+
+ offset_in_section = this->current_data_size_for_child();
off_t aligned_offset_in_section = align_address(offset_in_section,
- addralign);
+ addralign);
+ this->set_current_data_size_for_child(aligned_offset_in_section
+ + input_section_size);
// Determine if we want to delay code-fill generation until the output
// section is written. When the target is relaxing, we want to delay fill
- // generating to avoid adjusting them during relaxation.
+ // generating to avoid adjusting them during relaxation. Also, if we are
+ // sorting input sections we must delay fill generation.
if (!this->generate_code_fills_at_write_
&& !have_sections_script
&& (sh_flags & elfcpp::SHF_EXECINSTR) != 0
&& parameters->target().has_code_fill()
- && parameters->target().may_relax())
+ && (parameters->target().may_relax()
+ || layout->is_section_ordering_specified()))
{
gold_assert(this->fills_.empty());
this->generate_code_fills_at_write_ = true;
// sections without input sections.
off_t fill_len = aligned_offset_in_section - offset_in_section;
if (this->input_sections_.empty())
- this->fills_.push_back(Fill(offset_in_section, fill_len));
+ this->fills_.push_back(Fill(offset_in_section, fill_len));
else
- {
- std::string fill_data(parameters->target().code_fill(fill_len));
- Output_data_const* odc = new Output_data_const(fill_data, 1);
- this->input_sections_.push_back(Input_section(odc));
- }
+ {
+ std::string fill_data(parameters->target().code_fill(fill_len));
+ Output_data_const* odc = new Output_data_const(fill_data, 1);
+ this->input_sections_.push_back(Input_section(odc));
+ }
}
- this->set_current_data_size_for_child(aligned_offset_in_section
- + shdr.get_sh_size());
-
// We need to keep track of this section if we are already keeping
// track of sections, or if we are relaxing. Also, if this is a
// section which requires sorting, or which may require sorting in
- // the future, we keep track of the sections.
- if (have_sections_script
+ // the future, we keep track of the sections. If the
+ // --section-ordering-file option is used to specify the order of
+ // sections, we need to keep track of sections.
+ if (this->always_keeps_input_sections_
+ || have_sections_script
|| !this->input_sections_.empty()
|| this->may_sort_attached_input_sections()
|| this->must_sort_attached_input_sections()
|| parameters->options().user_set_Map()
- || parameters->target().may_relax())
- this->input_sections_.push_back(Input_section(object, shndx,
- shdr.get_sh_size(),
- addralign));
+ || parameters->target().may_relax()
+ || layout->is_section_ordering_specified())
+ {
+ Input_section isecn(object, shndx, input_section_size, addralign);
+ /* If section ordering is requested by specifying a ordering file,
+ using --section-ordering-file, match the section name with
+ a pattern. */
+ if (parameters->options().section_ordering_file())
+ {
+ unsigned int section_order_index =
+ layout->find_section_order_index(std::string(secname));
+ if (section_order_index != 0)
+ {
+ isecn.set_section_order_index(section_order_index);
+ this->set_input_section_order_specified();
+ }
+ }
+ this->input_sections_.push_back(isecn);
+ }
return aligned_offset_in_section;
}
if (posd->is_data_size_valid())
{
- off_t offset_in_section = this->current_data_size_for_child();
- off_t aligned_offset_in_section = align_address(offset_in_section,
- posd->addralign());
- this->set_current_data_size_for_child(aligned_offset_in_section
- + posd->data_size());
+ off_t offset_in_section;
+ if (this->has_fixed_layout())
+ {
+ // For incremental updates, find a chunk of unused space.
+ offset_in_section = this->free_list_.allocate(posd->data_size(),
+ posd->addralign(), 0);
+ if (offset_in_section == -1)
+ gold_fallback(_("out of patch space in section %s; "
+ "relink with --incremental-full"),
+ this->name());
+ // Finalize the address and offset now.
+ uint64_t addr = this->address();
+ off_t offset = this->offset();
+ posd->set_address_and_file_offset(addr + offset_in_section,
+ offset + offset_in_section);
+ }
+ else
+ {
+ offset_in_section = this->current_data_size_for_child();
+ off_t aligned_offset_in_section = align_address(offset_in_section,
+ posd->addralign());
+ this->set_current_data_size_for_child(aligned_offset_in_section
+ + posd->data_size());
+ }
+ }
+ else if (this->has_fixed_layout())
+ {
+ // For incremental updates, arrange for the data to have a fixed layout.
+ // This will mean that additions to the data must be allocated from
+ // free space within the containing output section.
+ uint64_t addr = this->address();
+ posd->set_address(addr);
+ posd->set_file_offset(0);
+ // FIXME: This should eventually be unreachable.
+ // gold_unreachable();
}
}
// Add a relaxed input section.
void
-Output_section::add_relaxed_input_section(Output_relaxed_input_section* poris)
+Output_section::add_relaxed_input_section(Layout* layout,
+ Output_relaxed_input_section* poris,
+ const std::string& name)
{
Input_section inp(poris);
- this->add_output_section_data(&inp);
- if (this->is_relaxed_input_section_map_valid_)
+
+ // If the --section-ordering-file option is used to specify the order of
+ // sections, we need to keep track of sections.
+ if (layout->is_section_ordering_specified())
{
- Input_section_specifier iss(poris->relobj(), poris->shndx());
- this->relaxed_input_section_map_[iss] = poris;
+ unsigned int section_order_index =
+ layout->find_section_order_index(name);
+ if (section_order_index != 0)
+ {
+ inp.set_section_order_index(section_order_index);
+ this->set_input_section_order_specified();
+ }
}
+ this->add_output_section_data(&inp);
+ if (this->lookup_maps_->is_valid())
+ this->lookup_maps_->add_relaxed_input_section(poris->relobj(),
+ poris->shndx(), poris);
+
// For a relaxed section, we use the current data size. Linker scripts
// get all the input sections, including relaxed one from an output
- // section and add them back to them same output section to compute the
+ // section and add them back to the same output section to compute the
// output section size. If we do not account for sizes of relaxed input
- // sections, an output section would be incorrectly sized.
+ // sections, an output section would be incorrectly sized.
off_t offset_in_section = this->current_data_size_for_child();
off_t aligned_offset_in_section = align_address(offset_in_section,
poris->addralign());
bool
Output_section::add_merge_input_section(Relobj* object, unsigned int shndx,
uint64_t flags, uint64_t entsize,
- uint64_t addralign)
+ uint64_t addralign,
+ bool keeps_input_sections)
{
bool is_string = (flags & elfcpp::SHF_STRINGS) != 0;
- // We only merge strings if the alignment is not more than the
- // character size. This could be handled, but it's unusual.
- if (is_string && addralign > entsize)
- return false;
-
// We cannot restore merged input section states.
gold_assert(this->checkpoint_ == NULL);
// Look up merge sections by required properties.
+ // Currently, we only invalidate the lookup maps in script processing
+ // and relaxation. We should not have done either when we reach here.
+ // So we assume that the lookup maps are valid to simply code.
+ gold_assert(this->lookup_maps_->is_valid());
Merge_section_properties msp(is_string, entsize, addralign);
- Merge_section_by_properties_map::const_iterator p =
- this->merge_section_by_properties_map_.find(msp);
- if (p != this->merge_section_by_properties_map_.end())
- {
- Output_merge_base* merge_section = p->second;
- merge_section->add_input_section(object, shndx);
- gold_assert(merge_section->is_string() == is_string
- && merge_section->entsize() == entsize
- && merge_section->addralign() == addralign);
-
- // Link input section to found merge section.
- Input_section_specifier iss(object, shndx);
- this->merge_section_map_[iss] = merge_section;
- return true;
+ Output_merge_base* pomb = this->lookup_maps_->find_merge_section(msp);
+ bool is_new = false;
+ if (pomb != NULL)
+ {
+ gold_assert(pomb->is_string() == is_string
+ && pomb->entsize() == entsize
+ && pomb->addralign() == addralign);
}
-
- // We handle the actual constant merging in Output_merge_data or
- // Output_merge_string_data.
- Output_merge_base* pomb;
- if (!is_string)
- pomb = new Output_merge_data(entsize, addralign);
else
{
- switch (entsize)
+ // Create a new Output_merge_data or Output_merge_string_data.
+ if (!is_string)
+ pomb = new Output_merge_data(entsize, addralign);
+ else
{
- case 1:
- pomb = new Output_merge_string<char>(addralign);
- break;
- case 2:
- pomb = new Output_merge_string<uint16_t>(addralign);
- break;
- case 4:
- pomb = new Output_merge_string<uint32_t>(addralign);
- break;
- default:
- return false;
+ switch (entsize)
+ {
+ case 1:
+ pomb = new Output_merge_string<char>(addralign);
+ break;
+ case 2:
+ pomb = new Output_merge_string<uint16_t>(addralign);
+ break;
+ case 4:
+ pomb = new Output_merge_string<uint32_t>(addralign);
+ break;
+ default:
+ return false;
+ }
}
+ // If we need to do script processing or relaxation, we need to keep
+ // the original input sections to rebuild the fast lookup maps.
+ if (keeps_input_sections)
+ pomb->set_keeps_input_sections();
+ is_new = true;
}
- // Add new merge section to this output section and link merge section
- // properties to new merge section in map.
- this->add_output_merge_section(pomb, is_string, entsize);
- this->merge_section_by_properties_map_[msp] = pomb;
-
- // Add input section to new merge section and link input section to new
- // merge section in map.
- pomb->add_input_section(object, shndx);
- Input_section_specifier iss(object, shndx);
- this->merge_section_map_[iss] = pomb;
+ if (pomb->add_input_section(object, shndx))
+ {
+ // Add new merge section to this output section and link merge
+ // section properties to new merge section in map.
+ if (is_new)
+ {
+ this->add_output_merge_section(pomb, is_string, entsize);
+ this->lookup_maps_->add_merge_section(msp, pomb);
+ }
- return true;
+ // Add input section to new merge section and link input section to new
+ // merge section in map.
+ this->lookup_maps_->add_merge_input_section(object, shndx, pomb);
+ return true;
+ }
+ else
+ {
+ // If add_input_section failed, delete new merge section to avoid
+ // exporting empty merge sections in Output_section::get_input_section.
+ if (is_new)
+ delete pomb;
+ return false;
+ }
}
// Build a relaxation map to speed up relaxation of existing input sections.
const Input_section& is(input_sections[i]);
if (is.is_input_section() || is.is_relaxed_input_section())
{
- Input_section_specifier iss(is.relobj(), is.shndx());
- (*relaxation_map)[iss] = i;
+ Section_id sid(is.relobj(), is.shndx());
+ (*relaxation_map)[sid] = i;
}
}
}
// Convert regular input sections in INPUT_SECTIONS into relaxed input
-// sections in RELAXED_SECTIONS. MAP is a prebuilt map from input section
-// specifier to indices of INPUT_SECTIONS.
+// sections in RELAXED_SECTIONS. MAP is a prebuilt map from section id
+// indices of INPUT_SECTIONS.
void
Output_section::convert_input_sections_in_list_to_relaxed_sections(
for (size_t i = 0; i < relaxed_sections.size(); ++i)
{
Output_relaxed_input_section* poris = relaxed_sections[i];
- Input_section_specifier iss(poris->relobj(), poris->shndx());
- Relaxation_map::const_iterator p = map.find(iss);
+ Section_id sid(poris->relobj(), poris->shndx());
+ Relaxation_map::const_iterator p = map.find(sid);
gold_assert(p != map.end());
gold_assert((*input_sections)[p->second].is_input_section());
+
+ // Remember section order index of original input section
+ // if it is set. Copy it to the relaxed input section.
+ unsigned int soi =
+ (*input_sections)[p->second].section_order_index();
(*input_sections)[p->second] = Input_section(poris);
+ (*input_sections)[p->second].set_section_order_index(soi);
}
}
-
+
// Convert regular input sections into relaxed input sections. RELAXED_SECTIONS
// is a vector of pointers to Output_relaxed_input_section or its derived
// classes. The relaxed sections must correspond to existing input sections.
// this. If there is no checkpoint active, just search the current
// input section list and replace the sections there. If there is
// a checkpoint, also replace the sections there.
-
+
// By default, we look at the whole list.
size_t limit = this->input_sections_.size();
relaxed_sections,
map,
&this->input_sections_);
+
+ // Update fast look-up map.
+ if (this->lookup_maps_->is_valid())
+ for (size_t i = 0; i < relaxed_sections.size(); ++i)
+ {
+ Output_relaxed_input_section* poris = relaxed_sections[i];
+ this->lookup_maps_->add_relaxed_input_section(poris->relobj(),
+ poris->shndx(), poris);
+ }
}
// Update the output section flags based on input section flags.
& (elfcpp::SHF_WRITE
| elfcpp::SHF_ALLOC
| elfcpp::SHF_EXECINSTR));
+
+ if ((flags & elfcpp::SHF_MERGE) == 0)
+ this->flags_ &=~ elfcpp::SHF_MERGE;
+ else
+ {
+ if (this->current_data_size_for_child() == 0)
+ this->flags_ |= elfcpp::SHF_MERGE;
+ }
+
+ if ((flags & elfcpp::SHF_STRINGS) == 0)
+ this->flags_ &=~ elfcpp::SHF_STRINGS;
+ else
+ {
+ if (this->current_data_size_for_child() == 0)
+ this->flags_ |= elfcpp::SHF_STRINGS;
+ }
}
// Find the merge section into which an input section with index SHNDX in
Output_section::find_merge_section(const Relobj* object,
unsigned int shndx) const
{
- Input_section_specifier iss(object, shndx);
- Output_section_data_by_input_section_map::const_iterator p =
- this->merge_section_map_.find(iss);
- if (p != this->merge_section_map_.end())
+ if (!this->lookup_maps_->is_valid())
+ this->build_lookup_maps();
+ return this->lookup_maps_->find_merge_section(object, shndx);
+}
+
+// Build the lookup maps for merge and relaxed sections. This is needs
+// to be declared as a const methods so that it is callable with a const
+// Output_section pointer. The method only updates states of the maps.
+
+void
+Output_section::build_lookup_maps() const
+{
+ this->lookup_maps_->clear();
+ for (Input_section_list::const_iterator p = this->input_sections_.begin();
+ p != this->input_sections_.end();
+ ++p)
{
- Output_section_data* posd = p->second;
- gold_assert(posd->is_merge_section_for(object, shndx));
- return posd;
+ if (p->is_merge_section())
+ {
+ Output_merge_base* pomb = p->output_merge_base();
+ Merge_section_properties msp(pomb->is_string(), pomb->entsize(),
+ pomb->addralign());
+ this->lookup_maps_->add_merge_section(msp, pomb);
+ for (Output_merge_base::Input_sections::const_iterator is =
+ pomb->input_sections_begin();
+ is != pomb->input_sections_end();
+ ++is)
+ {
+ const Const_section_id& csid = *is;
+ this->lookup_maps_->add_merge_input_section(csid.first,
+ csid.second, pomb);
+ }
+
+ }
+ else if (p->is_relaxed_input_section())
+ {
+ Output_relaxed_input_section* poris = p->relaxed_input_section();
+ this->lookup_maps_->add_relaxed_input_section(poris->relobj(),
+ poris->shndx(), poris);
+ }
}
- else
- return NULL;
}
// Find an relaxed input section corresponding to an input section
// in OBJECT with index SHNDX.
-const Output_section_data*
+const Output_relaxed_input_section*
Output_section::find_relaxed_input_section(const Relobj* object,
unsigned int shndx) const
{
- // Be careful that the map may not be valid due to input section export
- // to scripts or a check-point restore.
- if (!this->is_relaxed_input_section_map_valid_)
- {
- // Rebuild the map as needed.
- this->relaxed_input_section_map_.clear();
- for (Input_section_list::const_iterator p = this->input_sections_.begin();
- p != this->input_sections_.end();
- ++p)
- if (p->is_relaxed_input_section())
- {
- Input_section_specifier iss(p->relobj(), p->shndx());
- this->relaxed_input_section_map_[iss] =
- p->relaxed_input_section();
- }
- this->is_relaxed_input_section_map_valid_ = true;
- }
-
- Input_section_specifier iss(object, shndx);
- Output_section_data_by_input_section_map::const_iterator p =
- this->relaxed_input_section_map_.find(iss);
- if (p != this->relaxed_input_section_map_.end())
- return p->second;
- else
- return NULL;
+ if (!this->lookup_maps_->is_valid())
+ this->build_lookup_maps();
+ return this->lookup_maps_->find_relaxed_input_section(object, shndx);
}
// Given an address OFFSET relative to the start of input section
{
section_offset_type output_offset;
bool found = posd->output_offset(object, shndx, offset, &output_offset);
- gold_assert(found);
+ gold_assert(found);
return output_offset != -1;
}
// Look at the Output_section_data_maps first.
const Output_section_data* posd = this->find_merge_section(object, shndx);
- if (posd == NULL)
+ if (posd == NULL)
posd = this->find_relaxed_input_section(object, shndx);
if (posd != NULL)
{
section_offset_type output_offset;
bool found = posd->output_offset(object, shndx, offset, &output_offset);
- gold_assert(found);
+ gold_assert(found);
return output_offset;
}
// Look at the Output_section_data_maps first.
const Output_section_data* posd = this->find_merge_section(object, shndx);
- if (posd == NULL)
+ if (posd == NULL)
posd = this->find_relaxed_input_section(object, shndx);
if (posd != NULL && posd->is_address_valid())
{
return false;
}
-// Set the data size of an Output_section. This is where we handle
-// setting the addresses of any Output_section_data objects.
+// Update the data size of an Output_section.
void
-Output_section::set_final_data_size()
+Output_section::update_data_size()
{
if (this->input_sections_.empty())
- {
- this->set_data_size(this->current_data_size_for_child());
return;
- }
- if (this->must_sort_attached_input_sections())
+ if (this->must_sort_attached_input_sections()
+ || this->input_section_order_specified())
this->sort_attached_input_sections();
- uint64_t address = this->address();
- off_t startoff = this->offset();
- off_t off = startoff + this->first_input_offset_;
+ off_t off = this->first_input_offset_;
for (Input_section_list::iterator p = this->input_sections_.begin();
p != this->input_sections_.end();
++p)
{
off = align_address(off, p->addralign());
- p->set_address_and_file_offset(address + (off - startoff), off,
- startoff);
- off += p->data_size();
+ off += p->current_data_size();
+ }
+
+ this->set_current_data_size_for_child(off);
+}
+
+// Set the data size of an Output_section. This is where we handle
+// setting the addresses of any Output_section_data objects.
+
+void
+Output_section::set_final_data_size()
+{
+ off_t data_size;
+
+ if (this->input_sections_.empty())
+ data_size = this->current_data_size_for_child();
+ else
+ {
+ if (this->must_sort_attached_input_sections()
+ || this->input_section_order_specified())
+ this->sort_attached_input_sections();
+
+ uint64_t address = this->address();
+ off_t startoff = this->offset();
+ off_t off = startoff + this->first_input_offset_;
+ for (Input_section_list::iterator p = this->input_sections_.begin();
+ p != this->input_sections_.end();
+ ++p)
+ {
+ off = align_address(off, p->addralign());
+ p->set_address_and_file_offset(address + (off - startoff), off,
+ startoff);
+ off += p->data_size();
+ }
+ data_size = off - startoff;
}
- this->set_data_size(off - startoff);
+ // For full incremental links, we want to allocate some patch space
+ // in most sections for subsequent incremental updates.
+ if (this->is_patch_space_allowed_ && parameters->incremental_full())
+ {
+ double pct = parameters->options().incremental_patch();
+ size_t extra = static_cast<size_t>(data_size * pct);
+ if (this->free_space_fill_ != NULL
+ && this->free_space_fill_->minimum_hole_size() > extra)
+ extra = this->free_space_fill_->minimum_hole_size();
+ off_t new_size = align_address(data_size + extra, this->addralign());
+ this->patch_space_ = new_size - data_size;
+ gold_debug(DEBUG_INCREMENTAL,
+ "set_final_data_size: %08lx + %08lx: section %s",
+ static_cast<long>(data_size),
+ static_cast<long>(this->patch_space_),
+ this->name());
+ data_size = new_size;
+ }
+
+ this->set_data_size(data_size);
}
// Reset the address and file offset.
{
// An unallocated section has no address. Forcing this means that
// we don't need special treatment for symbols defined in debug
- // sections. We do the same in the constructor.
- if ((this->flags_ & elfcpp::SHF_ALLOC) == 0)
+ // sections. We do the same in the constructor. This does not
+ // apply to NOLOAD sections though.
+ if (((this->flags_ & elfcpp::SHF_ALLOC) == 0) && !this->is_noload_)
this->set_address(0);
for (Input_section_list::iterator p = this->input_sections_.begin();
p != this->input_sections_.end();
++p)
p->reset_address_and_file_offset();
+
+ // Remove any patch space that was added in set_final_data_size.
+ if (this->patch_space_ > 0)
+ {
+ this->set_current_data_size_for_child(this->current_data_size_for_child()
+ - this->patch_space_);
+ this->patch_space_ = 0;
+ }
}
-
+
// Return true if address and file offset have the values after reset.
bool
// priority ordering implemented by the GNU linker, in which the
// priority becomes part of the section name and the sections are
// sorted by name. We only do this for an output section if we see an
-// attached input section matching ".ctor.*", ".dtor.*",
+// attached input section matching ".ctors.*", ".dtors.*",
// ".init_array.*" or ".fini_array.*".
class Output_section::Input_section_sort_entry
{ }
Input_section_sort_entry(const Input_section& input_section,
- unsigned int index)
+ unsigned int index,
+ bool must_sort_attached_input_sections)
: input_section_(input_section), index_(index),
section_has_name_(input_section.is_input_section()
|| input_section.is_relaxed_input_section())
{
- if (this->section_has_name_)
+ if (this->section_has_name_
+ && must_sort_attached_input_sections)
{
// This is only called single-threaded from Layout::finalize,
// so it is OK to lock. Unfortunately we have no way to pass
has_priority() const
{
gold_assert(this->section_has_name_);
- return this->section_name_.find('.', 1);
+ return this->section_name_.find('.', 1) != std::string::npos;
+ }
+
+ // Return the priority. Believe it or not, gcc encodes the priority
+ // differently for .ctors/.dtors and .init_array/.fini_array
+ // sections.
+ unsigned int
+ get_priority() const
+ {
+ gold_assert(this->section_has_name_);
+ bool is_ctors;
+ if (is_prefix_of(".ctors.", this->section_name_.c_str())
+ || is_prefix_of(".dtors.", this->section_name_.c_str()))
+ is_ctors = true;
+ else if (is_prefix_of(".init_array.", this->section_name_.c_str())
+ || is_prefix_of(".fini_array.", this->section_name_.c_str()))
+ is_ctors = false;
+ else
+ return 0;
+ char* end;
+ unsigned long prio = strtoul((this->section_name_.c_str()
+ + (is_ctors ? 7 : 12)),
+ &end, 10);
+ if (*end != '\0')
+ return 0;
+ else if (is_ctors)
+ return 65535 - prio;
+ else
+ return prio;
}
// Return true if this an input file whose base name matches
// file name this way is a dreadful hack, but the GNU linker does it
// in order to better support gcc, and we need to be compatible.
bool
- match_file_name(const char* match_file_name) const
+ match_file_name(const char* file_name) const
{
- const std::string& file_name(this->input_section_.relobj()->name());
- const char* base_name = lbasename(file_name.c_str());
- size_t match_len = strlen(match_file_name);
- if (strncmp(base_name, match_file_name, match_len) != 0)
+ if (this->input_section_.is_output_section_data())
return false;
- size_t base_len = strlen(base_name);
- if (base_len != match_len + 2 && base_len != match_len + 3)
- return false;
- return memcmp(base_name + base_len - 2, ".o", 2) == 0;
+ return Layout::match_file_name(this->input_section_.relobj(), file_name);
+ }
+
+ // Returns 1 if THIS should appear before S in section order, -1 if S
+ // appears before THIS and 0 if they are not comparable.
+ int
+ compare_section_ordering(const Input_section_sort_entry& s) const
+ {
+ unsigned int this_secn_index = this->input_section_.section_order_index();
+ unsigned int s_secn_index = s.input_section().section_order_index();
+ if (this_secn_index > 0 && s_secn_index > 0)
+ {
+ if (this_secn_index < s_secn_index)
+ return 1;
+ else if (this_secn_index > s_secn_index)
+ return -1;
+ }
+ return 0;
}
private:
}
// A section with a priority follows a section without a priority.
- // The GNU linker does this for all but .init_array sections; until
- // further notice we'll assume that that is an mistake.
bool s1_has_priority = s1.has_priority();
bool s2_has_priority = s2.has_priority();
if (s1_has_priority && !s2_has_priority)
if (!s1_has_priority && s2_has_priority)
return true;
+ // Check if a section order exists for these sections through a section
+ // ordering file. If sequence_num is 0, an order does not exist.
+ int sequence_num = s1.compare_section_ordering(s2);
+ if (sequence_num != 0)
+ return sequence_num == 1;
+
+ // Otherwise we sort by name.
+ int compare = s1.section_name().compare(s2.section_name());
+ if (compare != 0)
+ return compare < 0;
+
+ // Otherwise we keep the input order.
+ return s1.index() < s2.index();
+}
+
+// Return true if S1 should come before S2 in an .init_array or .fini_array
+// output section.
+
+bool
+Output_section::Input_section_sort_init_fini_compare::operator()(
+ const Output_section::Input_section_sort_entry& s1,
+ const Output_section::Input_section_sort_entry& s2) const
+{
+ // We sort all the sections with no names to the end.
+ if (!s1.section_has_name() || !s2.section_has_name())
+ {
+ if (s1.section_has_name())
+ return true;
+ if (s2.section_has_name())
+ return false;
+ return s1.index() < s2.index();
+ }
+
+ // A section without a priority follows a section with a priority.
+ // This is the reverse of .ctors and .dtors sections.
+ bool s1_has_priority = s1.has_priority();
+ bool s2_has_priority = s2.has_priority();
+ if (s1_has_priority && !s2_has_priority)
+ return true;
+ if (!s1_has_priority && s2_has_priority)
+ return false;
+
+ // .ctors and .dtors sections without priority come after
+ // .init_array and .fini_array sections without priority.
+ if (!s1_has_priority
+ && (s1.section_name() == ".ctors" || s1.section_name() == ".dtors")
+ && s1.section_name() != s2.section_name())
+ return false;
+ if (!s2_has_priority
+ && (s2.section_name() == ".ctors" || s2.section_name() == ".dtors")
+ && s2.section_name() != s1.section_name())
+ return true;
+
+ // Sort by priority if we can.
+ if (s1_has_priority)
+ {
+ unsigned int s1_prio = s1.get_priority();
+ unsigned int s2_prio = s2.get_priority();
+ if (s1_prio < s2_prio)
+ return true;
+ else if (s1_prio > s2_prio)
+ return false;
+ }
+
+ // Check if a section order exists for these sections through a section
+ // ordering file. If sequence_num is 0, an order does not exist.
+ int sequence_num = s1.compare_section_ordering(s2);
+ if (sequence_num != 0)
+ return sequence_num == 1;
+
// Otherwise we sort by name.
int compare = s1.section_name().compare(s2.section_name());
if (compare != 0)
return s1.index() < s2.index();
}
+// Return true if S1 should come before S2. Sections that do not match
+// any pattern in the section ordering file are placed ahead of the sections
+// that match some pattern.
+
+bool
+Output_section::Input_section_sort_section_order_index_compare::operator()(
+ const Output_section::Input_section_sort_entry& s1,
+ const Output_section::Input_section_sort_entry& s2) const
+{
+ unsigned int s1_secn_index = s1.input_section().section_order_index();
+ unsigned int s2_secn_index = s2.input_section().section_order_index();
+
+ // Keep input order if section ordering cannot determine order.
+ if (s1_secn_index == s2_secn_index)
+ return s1.index() < s2.index();
+
+ return s1_secn_index < s2_secn_index;
+}
+
+// Return true if S1 should come before S2. This is the sort comparison
+// function for .text to sort sections with prefixes
+// .text.{unlikely,exit,startup,hot} before other sections.
+
+bool
+Output_section::Input_section_sort_section_prefix_special_ordering_compare
+ ::operator()(
+ const Output_section::Input_section_sort_entry& s1,
+ const Output_section::Input_section_sort_entry& s2) const
+{
+ // We sort all the sections with no names to the end.
+ if (!s1.section_has_name() || !s2.section_has_name())
+ {
+ if (s1.section_has_name())
+ return true;
+ if (s2.section_has_name())
+ return false;
+ return s1.index() < s2.index();
+ }
+
+ // Some input section names have special ordering requirements.
+ int o1 = Layout::special_ordering_of_input_section(s1.section_name().c_str());
+ int o2 = Layout::special_ordering_of_input_section(s2.section_name().c_str());
+ if (o1 != o2)
+ {
+ if (o1 < 0)
+ return false;
+ else if (o2 < 0)
+ return true;
+ else
+ return o1 < o2;
+ }
+
+ // Keep input order otherwise.
+ return s1.index() < s2.index();
+}
+
+// Return true if S1 should come before S2. This is the sort comparison
+// function for sections to sort them by name.
+
+bool
+Output_section::Input_section_sort_section_name_compare
+ ::operator()(
+ const Output_section::Input_section_sort_entry& s1,
+ const Output_section::Input_section_sort_entry& s2) const
+{
+ // We sort all the sections with no names to the end.
+ if (!s1.section_has_name() || !s2.section_has_name())
+ {
+ if (s1.section_has_name())
+ return true;
+ if (s2.section_has_name())
+ return false;
+ return s1.index() < s2.index();
+ }
+
+ // We sort by name.
+ int compare = s1.section_name().compare(s2.section_name());
+ if (compare != 0)
+ return compare < 0;
+
+ // Keep input order otherwise.
+ return s1.index() < s2.index();
+}
+
+// This updates the section order index of input sections according to the
+// the order specified in the mapping from Section id to order index.
+
+void
+Output_section::update_section_layout(
+ const Section_layout_order* order_map)
+{
+ for (Input_section_list::iterator p = this->input_sections_.begin();
+ p != this->input_sections_.end();
+ ++p)
+ {
+ if (p->is_input_section()
+ || p->is_relaxed_input_section())
+ {
+ Object* obj = (p->is_input_section()
+ ? p->relobj()
+ : p->relaxed_input_section()->relobj());
+ unsigned int shndx = p->shndx();
+ Section_layout_order::const_iterator it
+ = order_map->find(Section_id(obj, shndx));
+ if (it == order_map->end())
+ continue;
+ unsigned int section_order_index = it->second;
+ if (section_order_index != 0)
+ {
+ p->set_section_order_index(section_order_index);
+ this->set_input_section_order_specified();
+ }
+ }
+ }
+}
+
// Sort the input sections attached to an output section.
void
for (Input_section_list::iterator p = this->input_sections_.begin();
p != this->input_sections_.end();
++p, ++i)
- sort_list.push_back(Input_section_sort_entry(*p, i));
+ sort_list.push_back(Input_section_sort_entry(*p, i,
+ this->must_sort_attached_input_sections()));
// Sort the input sections.
- std::sort(sort_list.begin(), sort_list.end(), Input_section_sort_compare());
+ if (this->must_sort_attached_input_sections())
+ {
+ if (this->type() == elfcpp::SHT_PREINIT_ARRAY
+ || this->type() == elfcpp::SHT_INIT_ARRAY
+ || this->type() == elfcpp::SHT_FINI_ARRAY)
+ std::sort(sort_list.begin(), sort_list.end(),
+ Input_section_sort_init_fini_compare());
+ else if (strcmp(parameters->options().sort_section(), "name") == 0)
+ std::sort(sort_list.begin(), sort_list.end(),
+ Input_section_sort_section_name_compare());
+ else if (strcmp(this->name(), ".text") == 0)
+ std::sort(sort_list.begin(), sort_list.end(),
+ Input_section_sort_section_prefix_special_ordering_compare());
+ else
+ std::sort(sort_list.begin(), sort_list.end(),
+ Input_section_sort_compare());
+ }
+ else
+ {
+ gold_assert(this->input_section_order_specified());
+ std::sort(sort_list.begin(), sort_list.end(),
+ Input_section_sort_section_order_index_compare());
+ }
// Copy the sorted input sections back to our list.
this->input_sections_.clear();
p != sort_list.end();
++p)
this->input_sections_.push_back(p->input_section());
+ sort_list.clear();
// Remember that we sorted the input sections, since we might get
// called again.
if (this->link_section_ != NULL)
oshdr->put_sh_link(this->link_section_->out_shndx());
else if (this->should_link_to_symtab_)
- oshdr->put_sh_link(layout->symtab_section()->out_shndx());
+ oshdr->put_sh_link(layout->symtab_section_shndx());
else if (this->should_link_to_dynsym_)
oshdr->put_sh_link(layout->dynsym_section()->out_shndx());
else
p->write(of);
off = aligned_off + p->data_size();
}
+
+ // For incremental links, fill in unused chunks in debug sections
+ // with dummy compilation unit headers.
+ if (this->free_space_fill_ != NULL)
+ {
+ for (Free_list::Const_iterator p = this->free_list_.begin();
+ p != this->free_list_.end();
+ ++p)
+ {
+ off_t off = p->start_;
+ size_t len = p->end_ - off;
+ this->free_space_fill_->write(of, this->offset() + off, len);
+ }
+ if (this->patch_space_ > 0)
+ {
+ off_t off = this->current_data_size_for_child() - this->patch_space_;
+ this->free_space_fill_->write(of, this->offset() + off,
+ this->patch_space_);
+ }
+ }
}
// If a section requires postprocessing, create the buffer to use.
Output_section::get_input_sections(
uint64_t address,
const std::string& fill,
- std::list<Simple_input_section>* input_sections)
+ std::list<Input_section>* input_sections)
{
if (this->checkpoint_ != NULL
&& !this->checkpoint_->input_sections_saved())
this->checkpoint_->save_input_sections();
- // Invalidate the relaxed input section map.
- this->is_relaxed_input_section_map_valid_ = false;
+ // Invalidate fast look-up maps.
+ this->lookup_maps_->invalidate();
uint64_t orig_address = address;
p != this->input_sections_.end();
++p)
{
- if (p->is_input_section())
- input_sections->push_back(Simple_input_section(p->relobj(),
- p->shndx()));
- else if (p->is_relaxed_input_section())
- input_sections->push_back(
- Simple_input_section(p->relaxed_input_section()));
+ if (p->is_input_section()
+ || p->is_relaxed_input_section()
+ || p->is_merge_section())
+ input_sections->push_back(*p);
else
{
uint64_t aligned_address = align_address(address, p->addralign());
return data_size;
}
-// Add an input section from a script.
+// Add a script input section. SIS is an Output_section::Input_section,
+// which can be either a plain input section or a special input section like
+// a relaxed input section. For a special input section, its size must be
+// finalized.
void
-Output_section::add_input_section_for_script(const Simple_input_section& sis,
- off_t data_size,
- uint64_t addralign)
+Output_section::add_script_input_section(const Input_section& sis)
{
+ uint64_t data_size = sis.data_size();
+ uint64_t addralign = sis.addralign();
if (addralign > this->addralign_)
this->addralign_ = addralign;
this->set_current_data_size_for_child(aligned_offset_in_section
+ data_size);
- Input_section is =
- (sis.is_relaxed_input_section()
- ? Input_section(sis.relaxed_input_section())
- : Input_section(sis.relobj(), sis.shndx(), data_size, addralign));
- this->input_sections_.push_back(is);
+ this->input_sections_.push_back(sis);
+
+ // Update fast lookup maps if necessary.
+ if (this->lookup_maps_->is_valid())
+ {
+ if (sis.is_merge_section())
+ {
+ Output_merge_base* pomb = sis.output_merge_base();
+ Merge_section_properties msp(pomb->is_string(), pomb->entsize(),
+ pomb->addralign());
+ this->lookup_maps_->add_merge_section(msp, pomb);
+ for (Output_merge_base::Input_sections::const_iterator p =
+ pomb->input_sections_begin();
+ p != pomb->input_sections_end();
+ ++p)
+ this->lookup_maps_->add_merge_input_section(p->first, p->second,
+ pomb);
+ }
+ else if (sis.is_relaxed_input_section())
+ {
+ Output_relaxed_input_section* poris = sis.relaxed_input_section();
+ this->lookup_maps_->add_relaxed_input_section(poris->relobj(),
+ poris->shndx(), poris);
+ }
+ }
}
-//
+// Save states for relaxation.
void
Output_section::save_states()
gold_assert(this->fills_.empty());
}
+void
+Output_section::discard_states()
+{
+ gold_assert(this->checkpoint_ != NULL);
+ delete this->checkpoint_;
+ this->checkpoint_ = NULL;
+ gold_assert(this->fills_.empty());
+
+ // Simply invalidate the fast lookup maps since we do not keep
+ // track of them.
+ this->lookup_maps_->invalidate();
+}
+
void
Output_section::restore_states()
{
this->attached_input_sections_are_sorted_ =
checkpoint->attached_input_sections_are_sorted();
- // Simply invalidate the relaxed input section map since we do not keep
- // track of it.
- this->is_relaxed_input_section_map_valid_ = false;
+ // Simply invalidate the fast lookup maps since we do not keep
+ // track of them.
+ this->lookup_maps_->invalidate();
+}
+
+// Update the section offsets of input sections in this. This is required if
+// relaxation causes some input sections to change sizes.
+
+void
+Output_section::adjust_section_offsets()
+{
+ if (!this->section_offsets_need_adjustment_)
+ return;
+
+ off_t off = 0;
+ for (Input_section_list::iterator p = this->input_sections_.begin();
+ p != this->input_sections_.end();
+ ++p)
+ {
+ off = align_address(off, p->addralign());
+ if (p->is_input_section())
+ p->relobj()->set_section_offset(p->shndx(), off);
+ off += p->data_size();
+ }
+
+ this->section_offsets_need_adjustment_ = false;
}
// Print to the map file.
p->print_merge_stats(this->name_);
}
+// Set a fixed layout for the section. Used for incremental update links.
+
+void
+Output_section::set_fixed_layout(uint64_t sh_addr, off_t sh_offset,
+ off_t sh_size, uint64_t sh_addralign)
+{
+ this->addralign_ = sh_addralign;
+ this->set_current_data_size(sh_size);
+ if ((this->flags_ & elfcpp::SHF_ALLOC) != 0)
+ this->set_address(sh_addr);
+ this->set_file_offset(sh_offset);
+ this->finalize_data_size();
+ this->free_list_.init(sh_size, false);
+ this->has_fixed_layout_ = true;
+}
+
+// Reserve space within the fixed layout for the section. Used for
+// incremental update links.
+
+void
+Output_section::reserve(uint64_t sh_offset, uint64_t sh_size)
+{
+ this->free_list_.remove(sh_offset, sh_offset + sh_size);
+}
+
+// Allocate space from the free list for the section. Used for
+// incremental update links.
+
+off_t
+Output_section::allocate(off_t len, uint64_t addralign)
+{
+ return this->free_list_.allocate(len, addralign, 0);
+}
+
// Output segment methods.
Output_segment::Output_segment(elfcpp::Elf_Word type, elfcpp::Elf_Word flags)
- : output_data_(),
- output_bss_(),
- vaddr_(0),
+ : vaddr_(0),
paddr_(0),
memsz_(0),
max_align_(0),
flags_(flags),
is_max_align_known_(false),
are_addresses_set_(false),
- is_large_data_segment_(false)
+ is_large_data_segment_(false),
+ is_unique_segment_(false)
{
+ // The ELF ABI specifies that a PT_TLS segment always has PF_R as
+ // the flags.
+ if (type == elfcpp::PT_TLS)
+ this->flags_ = elfcpp::PF_R;
}
-// Add an Output_section to an Output_segment.
+// Add an Output_section to a PT_LOAD Output_segment.
void
-Output_segment::add_output_section(Output_section* os,
- elfcpp::Elf_Word seg_flags)
+Output_segment::add_output_section_to_load(Layout* layout,
+ Output_section* os,
+ elfcpp::Elf_Word seg_flags)
{
+ gold_assert(this->type() == elfcpp::PT_LOAD);
gold_assert((os->flags() & elfcpp::SHF_ALLOC) != 0);
gold_assert(!this->is_max_align_known_);
gold_assert(os->is_large_data_section() == this->is_large_data_segment());
- // Update the segment flags.
- this->flags_ |= seg_flags;
-
- Output_segment::Output_data_list* pdl;
- if (os->type() == elfcpp::SHT_NOBITS)
- pdl = &this->output_bss_;
- else
- pdl = &this->output_data_;
-
- // So that PT_NOTE segments will work correctly, we need to ensure
- // that all SHT_NOTE sections are adjacent. This will normally
- // happen automatically, because all the SHT_NOTE input sections
- // will wind up in the same output section. However, it is possible
- // for multiple SHT_NOTE input sections to have different section
- // flags, and thus be in different output sections, but for the
- // different section flags to map into the same segment flags and
- // thus the same output segment.
-
- // Note that while there may be many input sections in an output
- // section, there are normally only a few output sections in an
- // output segment. This loop is expected to be fast.
-
- if (os->type() == elfcpp::SHT_NOTE && !pdl->empty())
- {
- Output_segment::Output_data_list::iterator p = pdl->end();
- do
- {
- --p;
- if ((*p)->is_section_type(elfcpp::SHT_NOTE))
- {
- ++p;
- pdl->insert(p, os);
- return;
- }
- }
- while (p != pdl->begin());
- }
-
- // Similarly, so that PT_TLS segments will work, we need to group
- // SHF_TLS sections. An SHF_TLS/SHT_NOBITS section is a special
- // case: we group the SHF_TLS/SHT_NOBITS sections right after the
- // SHF_TLS/SHT_PROGBITS sections. This lets us set up PT_TLS
- // correctly. SHF_TLS sections get added to both a PT_LOAD segment
- // and the PT_TLS segment -- we do this grouping only for the
- // PT_LOAD segment.
- if (this->type_ != elfcpp::PT_TLS
- && (os->flags() & elfcpp::SHF_TLS) != 0)
- {
- pdl = &this->output_data_;
- bool nobits = os->type() == elfcpp::SHT_NOBITS;
- bool sawtls = false;
- Output_segment::Output_data_list::iterator p = pdl->end();
- do
- {
- --p;
- bool insert;
- if ((*p)->is_section_flag_set(elfcpp::SHF_TLS))
- {
- sawtls = true;
- // Put a NOBITS section after the first TLS section.
- // Put a PROGBITS section after the first TLS/PROGBITS
- // section.
- insert = nobits || !(*p)->is_section_type(elfcpp::SHT_NOBITS);
- }
- else
- {
- // If we've gone past the TLS sections, but we've seen a
- // TLS section, then we need to insert this section now.
- insert = sawtls;
- }
-
- if (insert)
- {
- ++p;
- pdl->insert(p, os);
- return;
- }
- }
- while (p != pdl->begin());
-
- // There are no TLS sections yet; put this one at the requested
- // location in the section list.
- }
-
- // For the PT_GNU_RELRO segment, we need to group relro sections,
- // and we need to put them before any non-relro sections. Also,
- // relro local sections go before relro non-local sections.
- if (parameters->options().relro() && os->is_relro())
- {
- gold_assert(pdl == &this->output_data_);
- Output_segment::Output_data_list::iterator p;
- for (p = pdl->begin(); p != pdl->end(); ++p)
- {
- if (!(*p)->is_section())
- break;
-
- Output_section* pos = (*p)->output_section();
- if (!pos->is_relro()
- || (os->is_relro_local() && !pos->is_relro_local()))
- break;
- }
+ this->update_flags_for_output_section(seg_flags);
- pdl->insert(p, os);
- return;
- }
+ // We don't want to change the ordering if we have a linker script
+ // with a SECTIONS clause.
+ Output_section_order order = os->order();
+ if (layout->script_options()->saw_sections_clause())
+ order = static_cast<Output_section_order>(0);
+ else
+ gold_assert(order != ORDER_INVALID);
- // Small data sections go at the end of the list of data sections.
- // If OS is not small, and there are small sections, we have to
- // insert it before the first small section.
- if (os->type() != elfcpp::SHT_NOBITS
- && !os->is_small_section()
- && !pdl->empty()
- && pdl->back()->is_section()
- && pdl->back()->output_section()->is_small_section())
- {
- for (Output_segment::Output_data_list::iterator p = pdl->begin();
- p != pdl->end();
- ++p)
- {
- if ((*p)->is_section()
- && (*p)->output_section()->is_small_section())
- {
- pdl->insert(p, os);
- return;
- }
- }
- gold_unreachable();
- }
+ this->output_lists_[order].push_back(os);
+}
- // A small BSS section goes at the start of the BSS sections, after
- // other small BSS sections.
- if (os->type() == elfcpp::SHT_NOBITS && os->is_small_section())
- {
- for (Output_segment::Output_data_list::iterator p = pdl->begin();
- p != pdl->end();
- ++p)
- {
- if (!(*p)->is_section()
- || !(*p)->output_section()->is_small_section())
- {
- pdl->insert(p, os);
- return;
- }
- }
- }
+// Add an Output_section to a non-PT_LOAD Output_segment.
- // A large BSS section goes at the end of the BSS sections, which
- // means that one that is not large must come before the first large
- // one.
- if (os->type() == elfcpp::SHT_NOBITS
- && !os->is_large_section()
- && !pdl->empty()
- && pdl->back()->is_section()
- && pdl->back()->output_section()->is_large_section())
- {
- for (Output_segment::Output_data_list::iterator p = pdl->begin();
- p != pdl->end();
- ++p)
- {
- if ((*p)->is_section()
- && (*p)->output_section()->is_large_section())
- {
- pdl->insert(p, os);
- return;
- }
- }
- gold_unreachable();
- }
+void
+Output_segment::add_output_section_to_nonload(Output_section* os,
+ elfcpp::Elf_Word seg_flags)
+{
+ gold_assert(this->type() != elfcpp::PT_LOAD);
+ gold_assert((os->flags() & elfcpp::SHF_ALLOC) != 0);
+ gold_assert(!this->is_max_align_known_);
+
+ this->update_flags_for_output_section(seg_flags);
- pdl->push_back(os);
+ this->output_lists_[0].push_back(os);
}
// Remove an Output_section from this segment. It is an error if it
void
Output_segment::remove_output_section(Output_section* os)
{
- // We only need this for SHT_PROGBITS.
- gold_assert(os->type() == elfcpp::SHT_PROGBITS);
- for (Output_data_list::iterator p = this->output_data_.begin();
- p != this->output_data_.end();
- ++p)
- {
- if (*p == os)
- {
- this->output_data_.erase(p);
- return;
- }
- }
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ Output_data_list* pdl = &this->output_lists_[i];
+ for (Output_data_list::iterator p = pdl->begin(); p != pdl->end(); ++p)
+ {
+ if (*p == os)
+ {
+ pdl->erase(p);
+ return;
+ }
+ }
+ }
gold_unreachable();
}
-// Add an Output_data (which is not an Output_section) to the start of
-// a segment.
+// Add an Output_data (which need not be an Output_section) to the
+// start of a segment.
void
Output_segment::add_initial_output_data(Output_data* od)
{
gold_assert(!this->is_max_align_known_);
- this->output_data_.push_front(od);
+ Output_data_list::iterator p = this->output_lists_[0].begin();
+ this->output_lists_[0].insert(p, od);
+}
+
+// Return true if this segment has any sections which hold actual
+// data, rather than being a BSS section.
+
+bool
+Output_segment::has_any_data_sections() const
+{
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ const Output_data_list* pdl = &this->output_lists_[i];
+ for (Output_data_list::const_iterator p = pdl->begin();
+ p != pdl->end();
+ ++p)
+ {
+ if (!(*p)->is_section())
+ return true;
+ if ((*p)->output_section()->type() != elfcpp::SHT_NOBITS)
+ return true;
+ }
+ }
+ return false;
}
-// Return whether the first data section is a relro section.
+// Return whether the first data section (not counting TLS sections)
+// is a relro section.
bool
Output_segment::is_first_section_relro() const
{
- return (!this->output_data_.empty()
- && this->output_data_.front()->is_section()
- && this->output_data_.front()->output_section()->is_relro());
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ if (i == static_cast<int>(ORDER_TLS_DATA)
+ || i == static_cast<int>(ORDER_TLS_BSS))
+ continue;
+ const Output_data_list* pdl = &this->output_lists_[i];
+ if (!pdl->empty())
+ {
+ Output_data* p = pdl->front();
+ return p->is_section() && p->output_section()->is_relro();
+ }
+ }
+ return false;
}
// Return the maximum alignment of the Output_data in Output_segment.
{
if (!this->is_max_align_known_)
{
- uint64_t addralign;
-
- addralign = Output_segment::maximum_alignment_list(&this->output_data_);
- if (addralign > this->max_align_)
- this->max_align_ = addralign;
-
- addralign = Output_segment::maximum_alignment_list(&this->output_bss_);
- if (addralign > this->max_align_)
- this->max_align_ = addralign;
-
- // If -z relro is in effect, and the first section in this
- // segment is a relro section, then the segment must be aligned
- // to at least the common page size. This ensures that the
- // PT_GNU_RELRO segment will start at a page boundary.
- if (this->type_ == elfcpp::PT_LOAD
- && parameters->options().relro()
- && this->is_first_section_relro())
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
{
- addralign = parameters->target().common_pagesize();
+ const Output_data_list* pdl = &this->output_lists_[i];
+ uint64_t addralign = Output_segment::maximum_alignment_list(pdl);
if (addralign > this->max_align_)
this->max_align_ = addralign;
}
-
this->is_max_align_known_ = true;
}
return ret;
}
-// Return the number of dynamic relocs applied to this segment.
+// Return whether this segment has any dynamic relocs.
-unsigned int
-Output_segment::dynamic_reloc_count() const
+bool
+Output_segment::has_dynamic_reloc() const
{
- return (this->dynamic_reloc_count_list(&this->output_data_)
- + this->dynamic_reloc_count_list(&this->output_bss_));
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ if (this->has_dynamic_reloc_list(&this->output_lists_[i]))
+ return true;
+ return false;
}
-// Return the number of dynamic relocs applied to an Output_data_list.
+// Return whether this Output_data_list has any dynamic relocs.
-unsigned int
-Output_segment::dynamic_reloc_count_list(const Output_data_list* pdl) const
+bool
+Output_segment::has_dynamic_reloc_list(const Output_data_list* pdl) const
{
- unsigned int count = 0;
for (Output_data_list::const_iterator p = pdl->begin();
p != pdl->end();
++p)
- count += (*p)->dynamic_reloc_count();
- return count;
+ if ((*p)->has_dynamic_reloc())
+ return true;
+ return false;
}
// Set the section addresses for an Output_segment. If RESET is true,
// reset the addresses first. ADDR is the address and *POFF is the
// file offset. Set the section indexes starting with *PSHNDX.
-// Return the address of the immediately following segment. Update
-// *POFF and *PSHNDX.
+// INCREASE_RELRO is the size of the portion of the first non-relro
+// section that should be included in the PT_GNU_RELRO segment.
+// If this segment has relro sections, and has been aligned for
+// that purpose, set *HAS_RELRO to TRUE. Return the address of
+// the immediately following segment. Update *HAS_RELRO, *POFF,
+// and *PSHNDX.
uint64_t
-Output_segment::set_section_addresses(const Layout* layout, bool reset,
- uint64_t addr, off_t* poff,
+Output_segment::set_section_addresses(const Target* target,
+ Layout* layout, bool reset,
+ uint64_t addr,
+ unsigned int* increase_relro,
+ bool* has_relro,
+ off_t* poff,
unsigned int* pshndx)
{
gold_assert(this->type_ == elfcpp::PT_LOAD);
+ uint64_t last_relro_pad = 0;
+ off_t orig_off = *poff;
+
+ bool in_tls = false;
+
+ // If we have relro sections, we need to pad forward now so that the
+ // relro sections plus INCREASE_RELRO end on an abi page boundary.
+ if (parameters->options().relro()
+ && this->is_first_section_relro()
+ && (!this->are_addresses_set_ || reset))
+ {
+ uint64_t relro_size = 0;
+ off_t off = *poff;
+ uint64_t max_align = 0;
+ for (int i = 0; i <= static_cast<int>(ORDER_RELRO_LAST); ++i)
+ {
+ Output_data_list* pdl = &this->output_lists_[i];
+ Output_data_list::iterator p;
+ for (p = pdl->begin(); p != pdl->end(); ++p)
+ {
+ if (!(*p)->is_section())
+ break;
+ uint64_t align = (*p)->addralign();
+ if (align > max_align)
+ max_align = align;
+ if ((*p)->is_section_flag_set(elfcpp::SHF_TLS))
+ in_tls = true;
+ else if (in_tls)
+ {
+ // Align the first non-TLS section to the alignment
+ // of the TLS segment.
+ align = max_align;
+ in_tls = false;
+ }
+ relro_size = align_address(relro_size, align);
+ // Ignore the size of the .tbss section.
+ if ((*p)->is_section_flag_set(elfcpp::SHF_TLS)
+ && (*p)->is_section_type(elfcpp::SHT_NOBITS))
+ continue;
+ if ((*p)->is_address_valid())
+ relro_size += (*p)->data_size();
+ else
+ {
+ // FIXME: This could be faster.
+ (*p)->set_address_and_file_offset(addr + relro_size,
+ off + relro_size);
+ relro_size += (*p)->data_size();
+ (*p)->reset_address_and_file_offset();
+ }
+ }
+ if (p != pdl->end())
+ break;
+ }
+ relro_size += *increase_relro;
+ // Pad the total relro size to a multiple of the maximum
+ // section alignment seen.
+ uint64_t aligned_size = align_address(relro_size, max_align);
+ // Note the amount of padding added after the last relro section.
+ last_relro_pad = aligned_size - relro_size;
+ *has_relro = true;
+
+ uint64_t page_align = parameters->target().abi_pagesize();
+
+ // Align to offset N such that (N + RELRO_SIZE) % PAGE_ALIGN == 0.
+ uint64_t desired_align = page_align - (aligned_size % page_align);
+ if (desired_align < *poff % page_align)
+ *poff += page_align - *poff % page_align;
+ *poff += desired_align - *poff % page_align;
+ addr += *poff - orig_off;
+ orig_off = *poff;
+ }
+
if (!reset && this->are_addresses_set_)
{
gold_assert(this->paddr_ == addr);
this->are_addresses_set_ = true;
}
- bool in_tls = false;
-
- bool in_relro = (parameters->options().relro()
- && this->is_first_section_relro());
+ in_tls = false;
- off_t orig_off = *poff;
this->offset_ = orig_off;
- addr = this->set_section_list_addresses(layout, reset, &this->output_data_,
- addr, poff, pshndx, &in_tls,
- &in_relro);
- this->filesz_ = *poff - orig_off;
-
- off_t off = *poff;
+ off_t off = 0;
+ uint64_t ret;
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ if (i == static_cast<int>(ORDER_RELRO_LAST))
+ {
+ *poff += last_relro_pad;
+ addr += last_relro_pad;
+ if (this->output_lists_[i].empty())
+ {
+ // If there is nothing in the ORDER_RELRO_LAST list,
+ // the padding will occur at the end of the relro
+ // segment, and we need to add it to *INCREASE_RELRO.
+ *increase_relro += last_relro_pad;
+ }
+ }
+ addr = this->set_section_list_addresses(layout, reset,
+ &this->output_lists_[i],
+ addr, poff, pshndx, &in_tls);
+ if (i < static_cast<int>(ORDER_SMALL_BSS))
+ {
+ this->filesz_ = *poff - orig_off;
+ off = *poff;
+ }
- uint64_t ret = this->set_section_list_addresses(layout, reset,
- &this->output_bss_,
- addr, poff, pshndx,
- &in_tls, &in_relro);
+ ret = addr;
+ }
// If the last section was a TLS section, align upward to the
// alignment of the TLS segment, so that the overall size of the TLS
*poff = align_address(*poff, segment_align);
}
- // If all the sections were relro sections, align upward to the
- // common page size.
- if (in_relro)
- {
- uint64_t page_align = parameters->target().common_pagesize();
- *poff = align_address(*poff, page_align);
- }
-
this->memsz_ = *poff - orig_off;
// Ignore the file offset adjustments made by the BSS Output_data
// objects.
*poff = off;
+ // If code segments must contain only code, and this code segment is
+ // page-aligned in the file, then fill it out to a whole page with
+ // code fill (the tail of the segment will not be within any section).
+ // Thus the entire code segment can be mapped from the file as whole
+ // pages and that mapping will contain only valid instructions.
+ if (target->isolate_execinstr() && (this->flags() & elfcpp::PF_X) != 0)
+ {
+ uint64_t abi_pagesize = target->abi_pagesize();
+ if (orig_off % abi_pagesize == 0 && off % abi_pagesize != 0)
+ {
+ size_t fill_size = abi_pagesize - (off % abi_pagesize);
+
+ std::string fill_data;
+ if (target->has_code_fill())
+ fill_data = target->code_fill(fill_size);
+ else
+ fill_data.resize(fill_size); // Zero fill.
+
+ Output_data_const* fill = new Output_data_const(fill_data, 0);
+ fill->set_address(this->vaddr_ + this->memsz_);
+ fill->set_file_offset(off);
+ layout->add_relax_output(fill);
+
+ off += fill_size;
+ gold_assert(off % abi_pagesize == 0);
+ ret += fill_size;
+ gold_assert(ret % abi_pagesize == 0);
+
+ gold_assert((uint64_t) this->filesz_ == this->memsz_);
+ this->memsz_ = this->filesz_ += fill_size;
+
+ *poff = off;
+ }
+ }
+
return ret;
}
// structures.
uint64_t
-Output_segment::set_section_list_addresses(const Layout* layout, bool reset,
- Output_data_list* pdl,
+Output_segment::set_section_list_addresses(Layout* layout, bool reset,
+ Output_data_list* pdl,
uint64_t addr, off_t* poff,
unsigned int* pshndx,
- bool* in_tls, bool* in_relro)
+ bool* in_tls)
{
off_t startoff = *poff;
+ // For incremental updates, we may allocate non-fixed sections from
+ // free space in the file. This keeps track of the high-water mark.
+ off_t maxoff = startoff;
off_t off = startoff;
for (Output_data_list::iterator p = pdl->begin();
if (reset)
(*p)->reset_address_and_file_offset();
- // When using a linker script the section will most likely
- // already have an address.
+ // When doing an incremental update or when using a linker script,
+ // the section will most likely already have an address.
if (!(*p)->is_address_valid())
{
- uint64_t align = (*p)->addralign();
-
- if ((*p)->is_section_flag_set(elfcpp::SHF_TLS))
- {
- // Give the first TLS section the alignment of the
- // entire TLS segment. Otherwise the TLS segment as a
- // whole may be misaligned.
- if (!*in_tls)
- {
- Output_segment* tls_segment = layout->tls_segment();
- gold_assert(tls_segment != NULL);
- uint64_t segment_align = tls_segment->maximum_alignment();
- gold_assert(segment_align >= align);
- align = segment_align;
-
- *in_tls = true;
- }
- }
- else
- {
- // If this is the first section after the TLS segment,
- // align it to at least the alignment of the TLS
- // segment, so that the size of the overall TLS segment
- // is aligned.
- if (*in_tls)
- {
- uint64_t segment_align =
- layout->tls_segment()->maximum_alignment();
- if (segment_align > align)
- align = segment_align;
-
- *in_tls = false;
- }
- }
-
- // If this is a non-relro section after a relro section,
- // align it to a common page boundary so that the dynamic
- // linker has a page to mark as read-only.
- if (*in_relro
- && (!(*p)->is_section()
- || !(*p)->output_section()->is_relro()))
+ uint64_t align = (*p)->addralign();
+
+ if ((*p)->is_section_flag_set(elfcpp::SHF_TLS))
+ {
+ // Give the first TLS section the alignment of the
+ // entire TLS segment. Otherwise the TLS segment as a
+ // whole may be misaligned.
+ if (!*in_tls)
+ {
+ Output_segment* tls_segment = layout->tls_segment();
+ gold_assert(tls_segment != NULL);
+ uint64_t segment_align = tls_segment->maximum_alignment();
+ gold_assert(segment_align >= align);
+ align = segment_align;
+
+ *in_tls = true;
+ }
+ }
+ else
{
- uint64_t page_align = parameters->target().common_pagesize();
- if (page_align > align)
- align = page_align;
- *in_relro = false;
+ // If this is the first section after the TLS segment,
+ // align it to at least the alignment of the TLS
+ // segment, so that the size of the overall TLS segment
+ // is aligned.
+ if (*in_tls)
+ {
+ uint64_t segment_align =
+ layout->tls_segment()->maximum_alignment();
+ if (segment_align > align)
+ align = segment_align;
+
+ *in_tls = false;
+ }
}
- off = align_address(off, align);
- (*p)->set_address_and_file_offset(addr + (off - startoff), off);
+ if (!parameters->incremental_update())
+ {
+ off = align_address(off, align);
+ (*p)->set_address_and_file_offset(addr + (off - startoff), off);
+ }
+ else
+ {
+ // Incremental update: allocate file space from free list.
+ (*p)->pre_finalize_data_size();
+ off_t current_size = (*p)->current_data_size();
+ off = layout->allocate(current_size, align, startoff);
+ if (off == -1)
+ {
+ gold_assert((*p)->output_section() != NULL);
+ gold_fallback(_("out of patch space for section %s; "
+ "relink with --incremental-full"),
+ (*p)->output_section()->name());
+ }
+ (*p)->set_address_and_file_offset(addr + (off - startoff), off);
+ if ((*p)->data_size() > current_size)
+ {
+ gold_assert((*p)->output_section() != NULL);
+ gold_fallback(_("%s: section changed size; "
+ "relink with --incremental-full"),
+ (*p)->output_section()->name());
+ }
+ }
+ }
+ else if (parameters->incremental_update())
+ {
+ // For incremental updates, use the fixed offset for the
+ // high-water mark computation.
+ off = (*p)->offset();
}
else
{
// The script may have inserted a skip forward, but it
// better not have moved backward.
- gold_assert((*p)->address() >= addr + (off - startoff));
- off += (*p)->address() - (addr + (off - startoff));
+ if ((*p)->address() >= addr + (off - startoff))
+ off += (*p)->address() - (addr + (off - startoff));
+ else
+ {
+ if (!layout->script_options()->saw_sections_clause())
+ gold_unreachable();
+ else
+ {
+ Output_section* os = (*p)->output_section();
+
+ // Cast to unsigned long long to avoid format warnings.
+ unsigned long long previous_dot =
+ static_cast<unsigned long long>(addr + (off - startoff));
+ unsigned long long dot =
+ static_cast<unsigned long long>((*p)->address());
+
+ if (os == NULL)
+ gold_error(_("dot moves backward in linker script "
+ "from 0x%llx to 0x%llx"), previous_dot, dot);
+ else
+ gold_error(_("address of section '%s' moves backward "
+ "from 0x%llx to 0x%llx"),
+ os->name(), previous_dot, dot);
+ }
+ }
(*p)->set_file_offset(off);
(*p)->finalize_data_size();
}
- // We want to ignore the size of a SHF_TLS or SHT_NOBITS
+ if (parameters->incremental_update())
+ gold_debug(DEBUG_INCREMENTAL,
+ "set_section_list_addresses: %08lx %08lx %s",
+ static_cast<long>(off),
+ static_cast<long>((*p)->data_size()),
+ ((*p)->output_section() != NULL
+ ? (*p)->output_section()->name() : "(special)"));
+
+ // We want to ignore the size of a SHF_TLS SHT_NOBITS
// section. Such a section does not affect the size of a
// PT_LOAD segment.
if (!(*p)->is_section_flag_set(elfcpp::SHF_TLS)
|| !(*p)->is_section_type(elfcpp::SHT_NOBITS))
off += (*p)->data_size();
+ if (off > maxoff)
+ maxoff = off;
+
if ((*p)->is_section())
{
(*p)->set_out_shndx(*pshndx);
}
}
- *poff = off;
- return addr + (off - startoff);
+ *poff = maxoff;
+ return addr + (maxoff - startoff);
}
// For a non-PT_LOAD segment, set the offset from the sections, if
-// any.
+// any. Add INCREASE to the file size and the memory size.
void
-Output_segment::set_offset()
+Output_segment::set_offset(unsigned int increase)
{
gold_assert(this->type_ != elfcpp::PT_LOAD);
gold_assert(!this->are_addresses_set_);
- if (this->output_data_.empty() && this->output_bss_.empty())
+ // A non-load section only uses output_lists_[0].
+
+ Output_data_list* pdl = &this->output_lists_[0];
+
+ if (pdl->empty())
{
+ gold_assert(increase == 0);
this->vaddr_ = 0;
this->paddr_ = 0;
this->are_addresses_set_ = true;
return;
}
- const Output_data* first;
- if (this->output_data_.empty())
- first = this->output_bss_.front();
- else
- first = this->output_data_.front();
+ // Find the first and last section by address.
+ const Output_data* first = NULL;
+ const Output_data* last_data = NULL;
+ const Output_data* last_bss = NULL;
+ for (Output_data_list::const_iterator p = pdl->begin();
+ p != pdl->end();
+ ++p)
+ {
+ if (first == NULL
+ || (*p)->address() < first->address()
+ || ((*p)->address() == first->address()
+ && (*p)->data_size() < first->data_size()))
+ first = *p;
+ const Output_data** plast;
+ if ((*p)->is_section()
+ && (*p)->output_section()->type() == elfcpp::SHT_NOBITS)
+ plast = &last_bss;
+ else
+ plast = &last_data;
+ if (*plast == NULL
+ || (*p)->address() > (*plast)->address()
+ || ((*p)->address() == (*plast)->address()
+ && (*p)->data_size() > (*plast)->data_size()))
+ *plast = *p;
+ }
+
this->vaddr_ = first->address();
this->paddr_ = (first->has_load_address()
? first->load_address()
this->are_addresses_set_ = true;
this->offset_ = first->offset();
- if (this->output_data_.empty())
+ if (last_data == NULL)
this->filesz_ = 0;
else
- {
- const Output_data* last_data = this->output_data_.back();
- this->filesz_ = (last_data->address()
- + last_data->data_size()
- - this->vaddr_);
- }
+ this->filesz_ = (last_data->address()
+ + last_data->data_size()
+ - this->vaddr_);
- const Output_data* last;
- if (this->output_bss_.empty())
- last = this->output_data_.back();
- else
- last = this->output_bss_.back();
+ const Output_data* last = last_bss != NULL ? last_bss : last_data;
this->memsz_ = (last->address()
+ last->data_size()
- this->vaddr_);
+ this->filesz_ += increase;
+ this->memsz_ += increase;
+
+ // If this is a RELRO segment, verify that the segment ends at a
+ // page boundary.
+ if (this->type_ == elfcpp::PT_GNU_RELRO)
+ {
+ uint64_t page_align = parameters->target().abi_pagesize();
+ uint64_t segment_end = this->vaddr_ + this->memsz_;
+ if (parameters->incremental_update())
+ {
+ // The INCREASE_RELRO calculation is bypassed for an incremental
+ // update, so we need to adjust the segment size manually here.
+ segment_end = align_address(segment_end, page_align);
+ this->memsz_ = segment_end - this->vaddr_;
+ }
+ else
+ gold_assert(segment_end == align_address(segment_end, page_align));
+ }
+
// If this is a TLS segment, align the memory size. The code in
// set_section_list ensures that the section after the TLS segment
// is aligned to give us room.
gold_assert(this->vaddr_ == align_address(this->vaddr_, segment_align));
this->memsz_ = align_address(this->memsz_, segment_align);
}
-
- // If this is a RELRO segment, align the memory size. The code in
- // set_section_list ensures that the section after the RELRO segment
- // is aligned to give us room.
- if (this->type_ == elfcpp::PT_GNU_RELRO)
- {
- uint64_t page_align = parameters->target().common_pagesize();
- gold_assert(this->vaddr_ == align_address(this->vaddr_, page_align));
- this->memsz_ = align_address(this->memsz_, page_align);
- }
}
// Set the TLS offsets of the sections in the PT_TLS segment.
{
gold_assert(this->type_ == elfcpp::PT_TLS);
- for (Output_data_list::iterator p = this->output_data_.begin();
- p != this->output_data_.end();
- ++p)
- (*p)->set_tls_offset(this->vaddr_);
-
- for (Output_data_list::iterator p = this->output_bss_.begin();
- p != this->output_bss_.end();
+ for (Output_data_list::iterator p = this->output_lists_[0].begin();
+ p != this->output_lists_[0].end();
++p)
(*p)->set_tls_offset(this->vaddr_);
}
-// Return the address of the first section.
+// Return the first section.
-uint64_t
-Output_segment::first_section_load_address() const
+Output_section*
+Output_segment::first_section() const
{
- for (Output_data_list::const_iterator p = this->output_data_.begin();
- p != this->output_data_.end();
- ++p)
- if ((*p)->is_section())
- return (*p)->has_load_address() ? (*p)->load_address() : (*p)->address();
-
- for (Output_data_list::const_iterator p = this->output_bss_.begin();
- p != this->output_bss_.end();
- ++p)
- if ((*p)->is_section())
- return (*p)->has_load_address() ? (*p)->load_address() : (*p)->address();
-
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ const Output_data_list* pdl = &this->output_lists_[i];
+ for (Output_data_list::const_iterator p = pdl->begin();
+ p != pdl->end();
+ ++p)
+ {
+ if ((*p)->is_section())
+ return (*p)->output_section();
+ }
+ }
gold_unreachable();
}
unsigned int
Output_segment::output_section_count() const
{
- return (this->output_section_count_list(&this->output_data_)
- + this->output_section_count_list(&this->output_bss_));
+ unsigned int ret = 0;
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ ret += this->output_section_count_list(&this->output_lists_[i]);
+ return ret;
}
// Return the number of Output_sections in an Output_data_list.
{
Output_section* found = NULL;
uint64_t found_lma = 0;
- this->lowest_load_address_in_list(&this->output_data_, &found, &found_lma);
-
- Output_section* found_data = found;
- this->lowest_load_address_in_list(&this->output_bss_, &found, &found_lma);
- if (found != found_data && found_data != NULL)
- {
- gold_error(_("nobits section %s may not precede progbits section %s "
- "in same segment"),
- found->name(), found_data->name());
- return NULL;
- }
-
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ this->lowest_load_address_in_list(&this->output_lists_[i], &found,
+ &found_lma);
return found;
}
Output_segment::write_section_headers(const Layout* layout,
const Stringpool* secnamepool,
unsigned char* v,
- unsigned int *pshndx) const
+ unsigned int* pshndx) const
{
// Every section that is attached to a segment must be attached to a
// PT_LOAD segment, so we only write out section headers for PT_LOAD
if (this->type_ != elfcpp::PT_LOAD)
return v;
- v = this->write_section_headers_list<size, big_endian>(layout, secnamepool,
- &this->output_data_,
- v, pshndx);
- v = this->write_section_headers_list<size, big_endian>(layout, secnamepool,
- &this->output_bss_,
- v, pshndx);
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ {
+ const Output_data_list* pdl = &this->output_lists_[i];
+ v = this->write_section_headers_list<size, big_endian>(layout,
+ secnamepool,
+ pdl,
+ v, pshndx);
+ }
+
return v;
}
{
if (this->type() != elfcpp::PT_LOAD)
return;
- this->print_section_list_to_mapfile(mapfile, &this->output_data_);
- this->print_section_list_to_mapfile(mapfile, &this->output_bss_);
+ for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
+ this->print_section_list_to_mapfile(mapfile, &this->output_lists_[i]);
}
// Print an output section list to the map file.
file_size_(0),
base_(NULL),
map_is_anonymous_(false),
+ map_is_allocated_(false),
is_temporary_(false)
{
}
// Try to open an existing file. Returns false if the file doesn't
-// exist, has a size of 0 or can't be mmapped.
+// exist, has a size of 0 or can't be mmapped. If BASE_NAME is not
+// NULL, open that file as the base for incremental linking, and
+// copy its contents to the new output file. This routine can
+// be called for incremental updates, in which case WRITABLE should
+// be true, or by the incremental-dump utility, in which case
+// WRITABLE should be false.
bool
-Output_file::open_for_modification()
+Output_file::open_base_file(const char* base_name, bool writable)
{
// The name "-" means "stdout".
if (strcmp(this->name_, "-") == 0)
return false;
+ bool use_base_file = base_name != NULL;
+ if (!use_base_file)
+ base_name = this->name_;
+ else if (strcmp(base_name, this->name_) == 0)
+ gold_fatal(_("%s: incremental base and output file name are the same"),
+ base_name);
+
// Don't bother opening files with a size of zero.
struct stat s;
- if (::stat(this->name_, &s) != 0 || s.st_size == 0)
- return false;
+ if (::stat(base_name, &s) != 0)
+ {
+ gold_info(_("%s: stat: %s"), base_name, strerror(errno));
+ return false;
+ }
+ if (s.st_size == 0)
+ {
+ gold_info(_("%s: incremental base file is empty"), base_name);
+ return false;
+ }
- int o = open_descriptor(-1, this->name_, O_RDWR, 0);
+ // If we're using a base file, we want to open it read-only.
+ if (use_base_file)
+ writable = false;
+
+ int oflags = writable ? O_RDWR : O_RDONLY;
+ int o = open_descriptor(-1, base_name, oflags, 0);
if (o < 0)
- gold_fatal(_("%s: open: %s"), this->name_, strerror(errno));
+ {
+ gold_info(_("%s: open: %s"), base_name, strerror(errno));
+ return false;
+ }
+
+ // If the base file and the output file are different, open a
+ // new output file and read the contents from the base file into
+ // the newly-mapped region.
+ if (use_base_file)
+ {
+ this->open(s.st_size);
+ ssize_t bytes_to_read = s.st_size;
+ unsigned char* p = this->base_;
+ while (bytes_to_read > 0)
+ {
+ ssize_t len = ::read(o, p, bytes_to_read);
+ if (len < 0)
+ {
+ gold_info(_("%s: read failed: %s"), base_name, strerror(errno));
+ return false;
+ }
+ if (len == 0)
+ {
+ gold_info(_("%s: file too short: read only %lld of %lld bytes"),
+ base_name,
+ static_cast<long long>(s.st_size - bytes_to_read),
+ static_cast<long long>(s.st_size));
+ return false;
+ }
+ p += len;
+ bytes_to_read -= len;
+ }
+ ::close(o);
+ return true;
+ }
+
this->o_ = o;
this->file_size_ = s.st_size;
- // If the file can't be mmapped, copying the content to an anonymous
- // map will probably negate the performance benefits of incremental
- // linking. This could be helped by using views and loading only
- // the necessary parts, but this is not supported as of now.
- if (!this->map_no_anonymous())
+ if (!this->map_no_anonymous(writable))
{
release_descriptor(o, true);
this->o_ = -1;
// to unmap to flush to the file, then remap after growing the file.
if (this->map_is_anonymous_)
{
- void* base = ::mremap(this->base_, this->file_size_, file_size,
- MREMAP_MAYMOVE);
- if (base == MAP_FAILED)
- gold_fatal(_("%s: mremap: %s"), this->name_, strerror(errno));
+ void* base;
+ if (!this->map_is_allocated_)
+ {
+ base = ::mremap(this->base_, this->file_size_, file_size,
+ MREMAP_MAYMOVE);
+ if (base == MAP_FAILED)
+ gold_fatal(_("%s: mremap: %s"), this->name_, strerror(errno));
+ }
+ else
+ {
+ base = realloc(this->base_, file_size);
+ if (base == NULL)
+ gold_nomem();
+ if (file_size > this->file_size_)
+ memset(static_cast<char*>(base) + this->file_size_, 0,
+ file_size - this->file_size_);
+ }
this->base_ = static_cast<unsigned char*>(base);
this->file_size_ = file_size;
}
{
this->unmap();
this->file_size_ = file_size;
- if (!this->map_no_anonymous())
+ if (!this->map_no_anonymous(true))
gold_fatal(_("%s: mmap: %s"), this->name_, strerror(errno));
}
}
{
void* base = ::mmap(NULL, this->file_size_, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if (base != MAP_FAILED)
+ if (base == MAP_FAILED)
{
- this->map_is_anonymous_ = true;
- this->base_ = static_cast<unsigned char*>(base);
- return true;
+ base = malloc(this->file_size_);
+ if (base == NULL)
+ return false;
+ memset(base, 0, this->file_size_);
+ this->map_is_allocated_ = true;
}
- return false;
+ this->base_ = static_cast<unsigned char*>(base);
+ this->map_is_anonymous_ = true;
+ return true;
}
// Map the file into memory. Return whether the mapping succeeded.
+// If WRITABLE is true, map with write access.
bool
-Output_file::map_no_anonymous()
+Output_file::map_no_anonymous(bool writable)
{
const int o = this->o_;
// output file will wind up incomplete, but we will have already
// exited. The alternative to fallocate would be to use fdatasync,
// but that would be a more significant performance hit.
- if (::posix_fallocate(o, 0, this->file_size_) < 0)
- gold_fatal(_("%s: %s"), this->name_, strerror(errno));
+ if (writable)
+ {
+ int err = gold_fallocate(o, 0, this->file_size_);
+ if (err != 0)
+ gold_fatal(_("%s: %s"), this->name_, strerror(err));
+ }
// Map the file into memory.
- base = ::mmap(NULL, this->file_size_, PROT_READ | PROT_WRITE,
- MAP_SHARED, o, 0);
+ int prot = PROT_READ;
+ if (writable)
+ prot |= PROT_WRITE;
+ base = ::mmap(NULL, this->file_size_, prot, MAP_SHARED, o, 0);
// The mmap call might fail because of file system issues: the file
// system might not support mmap at all, or it might not support
void
Output_file::map()
{
- if (this->map_no_anonymous())
+ if (parameters->options().mmap_output_file()
+ && this->map_no_anonymous(true))
return;
// The mmap call might fail because of file system issues: the file
return;
gold_fatal(_("%s: mmap: failed to allocate %lu bytes for output file: %s"),
- this->name_, static_cast<unsigned long>(this->file_size_),
- strerror(errno));
+ this->name_, static_cast<unsigned long>(this->file_size_),
+ strerror(errno));
}
// Unmap the file from memory.
void
Output_file::unmap()
{
- if (::munmap(this->base_, this->file_size_) < 0)
- gold_error(_("%s: munmap: %s"), this->name_, strerror(errno));
+ if (this->map_is_anonymous_)
+ {
+ // We've already written out the data, so there is no reason to
+ // waste time unmapping or freeing the memory.
+ }
+ else
+ {
+ if (::munmap(this->base_, this->file_size_) < 0)
+ gold_error(_("%s: munmap: %s"), this->name_, strerror(errno));
+ }
this->base_ = NULL;
}
size_t bytes_to_write = this->file_size_;
size_t offset = 0;
while (bytes_to_write > 0)
- {
- ssize_t bytes_written = ::write(this->o_, this->base_ + offset,
- bytes_to_write);
- if (bytes_written == 0)
- gold_error(_("%s: write: unexpected 0 return-value"), this->name_);
- else if (bytes_written < 0)
- gold_error(_("%s: write: %s"), this->name_, strerror(errno));
- else
- {
- bytes_to_write -= bytes_written;
- offset += bytes_written;
- }
- }
+ {
+ ssize_t bytes_written = ::write(this->o_, this->base_ + offset,
+ bytes_to_write);
+ if (bytes_written == 0)
+ gold_error(_("%s: write: unexpected 0 return-value"), this->name_);
+ else if (bytes_written < 0)
+ gold_error(_("%s: write: %s"), this->name_, strerror(errno));
+ else
+ {
+ bytes_to_write -= bytes_written;
+ offset += bytes_written;
+ }
+ }
}
this->unmap();
template
off_t
Output_section::add_input_section<32, false>(
- Sized_relobj<32, false>* object,
+ Layout* layout,
+ Sized_relobj_file<32, false>* object,
unsigned int shndx,
const char* secname,
const elfcpp::Shdr<32, false>& shdr,
template
off_t
Output_section::add_input_section<32, true>(
- Sized_relobj<32, true>* object,
+ Layout* layout,
+ Sized_relobj_file<32, true>* object,
unsigned int shndx,
const char* secname,
const elfcpp::Shdr<32, true>& shdr,
template
off_t
Output_section::add_input_section<64, false>(
- Sized_relobj<64, false>* object,
+ Layout* layout,
+ Sized_relobj_file<64, false>* object,
unsigned int shndx,
const char* secname,
const elfcpp::Shdr<64, false>& shdr,
template
off_t
Output_section::add_input_section<64, true>(
- Sized_relobj<64, true>* object,
+ Layout* layout,
+ Sized_relobj_file<64, true>* object,
unsigned int shndx,
const char* secname,
const elfcpp::Shdr<64, true>& shdr,
class Output_data_group<64, true>;
#endif
-#ifdef HAVE_TARGET_32_LITTLE
template
class Output_data_got<32, false>;
-#endif
-#ifdef HAVE_TARGET_32_BIG
template
class Output_data_got<32, true>;
-#endif
-#ifdef HAVE_TARGET_64_LITTLE
template
class Output_data_got<64, false>;
-#endif
-#ifdef HAVE_TARGET_64_BIG
template
class Output_data_got<64, true>;
-#endif
} // End namespace gold.
projects / binutils.git / blobdiff