Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
-
+#if !defined(__GO32__)
#include <sys/ioctl.h>
#include <sys/param.h>
#include <pwd.h>
+#endif
#include <varargs.h>
#include <ctype.h>
#include <string.h>
#include "signals.h"
#include "gdbcmd.h"
-#include "terminal.h"
+#include "serial.h"
#include "bfd.h"
#include "target.h"
+#include "demangle.h"
+#include "expression.h"
+#include "language.h"
+#include "annotate.h"
+
+#include "readline.h"
+
+/* readline defines this. */
+#undef savestring
/* Prototypes for local functions */
-#if !defined (NO_MALLOC_CHECK)
+#if defined (NO_MMALLOC) || defined (NO_MMALLOC_CHECK)
+#else
static void
malloc_botch PARAMS ((void));
-#endif /* NO_MALLOC_CHECK */
+#endif /* NO_MMALLOC, etc */
static void
fatal_dump_core (); /* Can't prototype with <varargs.h> usage... */
static void
set_width_command PARAMS ((char *, int, struct cmd_list_element *));
-static void
-vfprintf_filtered PARAMS ((FILE *, char *, va_list));
-
/* If this definition isn't overridden by the header files, assume
that isatty and fileno exist on this system. */
#ifndef ISATTY
static struct cleanup *cleanup_chain;
+/* Nonzero if we have job control. */
+
+int job_control;
+
/* Nonzero means a quit has been requested. */
int quit_flag;
-/* Nonzero means quit immediately if Control-C is typed now,
- rather than waiting until QUIT is executed. */
+/* Nonzero means quit immediately if Control-C is typed now, rather
+ than waiting until QUIT is executed. Be careful in setting this;
+ code which executes with immediate_quit set has to be very careful
+ about being able to deal with being interrupted at any time. It is
+ almost always better to use QUIT; the only exception I can think of
+ is being able to quit out of a system call (using EINTR loses if
+ the SIGINT happens between the previous QUIT and the system call).
+ To immediately quit in the case in which a SIGINT happens between
+ the previous QUIT and setting immediate_quit (desirable anytime we
+ expect to block), call QUIT after setting immediate_quit. */
int immediate_quit;
while ((ptr = cleanup_chain) != old_chain)
{
cleanup_chain = ptr->next;
- free (ptr);
+ free ((PTR)ptr);
}
}
{
target_terminal_ours ();
wrap_here(""); /* Force out any buffered output */
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
/* Print a warning message.
va_start (args);
target_terminal_ours ();
wrap_here(""); /* Force out any buffered output */
- fflush (stdout);
+ gdb_flush (gdb_stdout);
if (warning_pre_print)
- fprintf (stderr, warning_pre_print);
+ fprintf_unfiltered (gdb_stderr, warning_pre_print);
string = va_arg (args, char *);
- vfprintf (stderr, string, args);
- fprintf (stderr, "\n");
+ vfprintf_unfiltered (gdb_stderr, string, args);
+ fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
}
+/* Start the printing of an error message. Way to use this is to call
+ this, output the error message (use filtered output), and then call
+ return_to_top_level (RETURN_ERROR). error() provides a convenient way to
+ do this for the special case that the error message can be formatted with
+ a single printf call, but this is more general. */
+void
+error_begin ()
+{
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+
+ annotate_error_begin ();
+
+ if (error_pre_print)
+ fprintf_filtered (gdb_stderr, error_pre_print);
+}
+
/* Print an error message and return to command level.
The first argument STRING is the error message, used as a fprintf string,
and the remaining args are passed as arguments to it. */
va_list args;
char *string;
+ error_begin ();
va_start (args);
- target_terminal_ours ();
- wrap_here(""); /* Force out any buffered output */
- fflush (stdout);
- if (error_pre_print)
- fprintf (stderr, error_pre_print);
string = va_arg (args, char *);
- vfprintf (stderr, string, args);
- fprintf (stderr, "\n");
+ vfprintf_filtered (gdb_stderr, string, args);
+ fprintf_filtered (gdb_stderr, "\n");
va_end (args);
- return_to_top_level ();
+ return_to_top_level (RETURN_ERROR);
}
/* Print an error message and exit reporting failure.
va_start (args);
string = va_arg (args, char *);
- fprintf (stderr, "\ngdb: ");
- vfprintf (stderr, string, args);
- fprintf (stderr, "\n");
+ fprintf_unfiltered (gdb_stderr, "\ngdb: ");
+ vfprintf_unfiltered (gdb_stderr, string, args);
+ fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
exit (1);
}
string = va_arg (args, char *);
/* "internal error" is always correct, since GDB should never dump
core, no matter what the input. */
- fprintf (stderr, "\ngdb internal error: ");
- vfprintf (stderr, string, args);
- fprintf (stderr, "\n");
+ fprintf_unfiltered (gdb_stderr, "\ngdb internal error: ");
+ vfprintf_unfiltered (gdb_stderr, string, args);
+ fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
signal (SIGQUIT, SIG_DFL);
exit (1);
}
+/* The strerror() function can return NULL for errno values that are
+ out of range. Provide a "safe" version that always returns a
+ printable string. */
+
+char *
+safe_strerror (errnum)
+ int errnum;
+{
+ char *msg;
+ static char buf[32];
+
+ if ((msg = strerror (errnum)) == NULL)
+ {
+ sprintf (buf, "(undocumented errno %d)", errnum);
+ msg = buf;
+ }
+ return (msg);
+}
+
+/* The strsignal() function can return NULL for signal values that are
+ out of range. Provide a "safe" version that always returns a
+ printable string. */
+
+char *
+safe_strsignal (signo)
+ int signo;
+{
+ char *msg;
+ static char buf[32];
+
+ if ((msg = strsignal (signo)) == NULL)
+ {
+ sprintf (buf, "(undocumented signal %d)", signo);
+ msg = buf;
+ }
+ return (msg);
+}
+
+
/* Print the system error message for errno, and also mention STRING
as the file name for which the error was encountered.
Then return to command level. */
perror_with_name (string)
char *string;
{
- extern int sys_nerr;
- extern char *sys_errlist[];
char *err;
char *combined;
- if (errno < sys_nerr)
- err = sys_errlist[errno];
- else
- err = "unknown error";
-
+ err = safe_strerror (errno);
combined = (char *) alloca (strlen (err) + strlen (string) + 3);
strcpy (combined, string);
strcat (combined, ": ");
/* I understand setting these is a matter of taste. Still, some people
may clear errno but not know about bfd_error. Doing this here is not
unreasonable. */
- bfd_error = no_error;
+ bfd_set_error (bfd_error_no_error);
errno = 0;
error ("%s.", combined);
char *string;
int errcode;
{
- extern int sys_nerr;
- extern char *sys_errlist[];
char *err;
char *combined;
- if (errcode < sys_nerr)
- err = sys_errlist[errcode];
- else
- err = "unknown error";
-
+ err = safe_strerror (errcode);
combined = (char *) alloca (strlen (err) + strlen (string) + 3);
strcpy (combined, string);
strcat (combined, ": ");
strcat (combined, err);
- printf ("%s.\n", combined);
+ /* We want anything which was printed on stdout to come out first, before
+ this message. */
+ gdb_flush (gdb_stdout);
+ fprintf_unfiltered (gdb_stderr, "%s.\n", combined);
}
/* Control C eventually causes this to be called, at a convenient time. */
void
quit ()
{
+ serial_t gdb_stdout_serial = serial_fdopen (1);
+
target_terminal_ours ();
- wrap_here ((char *)0); /* Force out any pending output */
-#ifdef HAVE_TERMIO
- ioctl (fileno (stdout), TCFLSH, 1);
-#else /* not HAVE_TERMIO */
- ioctl (fileno (stdout), TIOCFLUSH, 0);
-#endif /* not HAVE_TERMIO */
-#ifdef TIOCGPGRP
- error ("Quit");
-#else
- error ("Quit (expect signal %d when inferior is resumed)", SIGINT);
-#endif /* TIOCGPGRP */
+
+ /* We want all output to appear now, before we print "Quit". We
+ have 3 levels of buffering we have to flush (it's possible that
+ some of these should be changed to flush the lower-level ones
+ too): */
+
+ /* 1. The _filtered buffer. */
+ wrap_here ((char *)0);
+
+ /* 2. The stdio buffer. */
+ gdb_flush (gdb_stdout);
+ gdb_flush (gdb_stderr);
+
+ /* 3. The system-level buffer. */
+ SERIAL_FLUSH_OUTPUT (gdb_stdout_serial);
+ SERIAL_UN_FDOPEN (gdb_stdout_serial);
+
+ annotate_error_begin ();
+
+ /* Don't use *_filtered; we don't want to prompt the user to continue. */
+ if (error_pre_print)
+ fprintf_unfiltered (gdb_stderr, error_pre_print);
+
+ if (job_control
+ /* If there is no terminal switching for this target, then we can't
+ possibly get screwed by the lack of job control. */
+ || current_target.to_terminal_ours == NULL)
+ fprintf_unfiltered (gdb_stderr, "Quit\n");
+ else
+ fprintf_unfiltered (gdb_stderr,
+ "Quit (expect signal SIGINT when the program is resumed)\n");
+ return_to_top_level (RETURN_QUIT);
+}
+
+
+#ifdef __GO32__
+
+/* In the absence of signals, poll keyboard for a quit.
+ Called from #define QUIT pollquit() in xm-go32.h. */
+
+void
+pollquit()
+{
+ if (kbhit ())
+ {
+ int k = getkey ();
+ if (k == 1) {
+ quit_flag = 1;
+ quit();
+ }
+ else if (k == 2) {
+ immediate_quit = 1;
+ quit ();
+ }
+ else
+ {
+ /* We just ignore it */
+ fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
+ }
+ }
}
+
+#endif
+#ifdef __GO32__
+void notice_quit()
+{
+ if (kbhit ())
+ {
+ int k = getkey ();
+ if (k == 1) {
+ quit_flag = 1;
+ }
+ else if (k == 2)
+ {
+ immediate_quit = 1;
+ }
+ else
+ {
+ fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
+ }
+ }
+}
+#else
+void notice_quit()
+{
+ /* Done by signals */
+}
+#endif
/* Control C comes here */
void
{
quit_flag = 1;
-#ifdef USG
- /* Restore the signal handler. */
+ /* Restore the signal handler. Harmless with BSD-style signals, needed
+ for System V-style signals. So just always do it, rather than worrying
+ about USG defines and stuff like that. */
signal (signo, request_quit);
-#endif
+#ifdef REQUEST_QUIT
+ REQUEST_QUIT;
+#else
if (immediate_quit)
quit ();
+#endif
}
\f
PTR ptr;
long size;
{
- return (realloc (ptr, size));
+ if (ptr == 0) /* Guard against old realloc's */
+ return malloc (size);
+ else
+ return realloc (ptr, size);
}
void
warning ("internal error: failed to install memory consistency checks");
}
- (void) mmtrace ();
+ mmtrace ();
}
#endif /* Have mmalloc and want corruption checking */
xmalloc (size)
long size;
{
- return (xmmalloc ((void *) NULL, size));
+ return (xmmalloc ((PTR) NULL, size));
}
/* Like mrealloc but get error if no storage available. */
PTR ptr;
long size;
{
- return (xmrealloc ((void *) NULL, ptr, size));
+ return (xmrealloc ((PTR) NULL, ptr, size));
}
\f
int size;
{
register char *p = (char *) xmalloc (size + 1);
- bcopy (ptr, p, size);
+ memcpy (p, ptr, size);
p[size] = 0;
return p;
}
char *
msavestring (md, ptr, size)
- void *md;
+ PTR md;
const char *ptr;
int size;
{
register char *p = (char *) xmmalloc (md, size + 1);
- bcopy (ptr, p, size);
+ memcpy (p, ptr, size);
p[size] = 0;
return p;
}
char *
mstrsave (md, ptr)
- void *md;
+ PTR md;
const char *ptr;
{
return (msavestring (md, ptr, strlen (ptr)));
fputc (' ', file);
}
+/* Print a host address. */
+
+void
+gdb_print_address (addr, stream)
+ PTR addr;
+ GDB_FILE *stream;
+{
+
+ /* We could use the %p conversion specifier to fprintf if we had any
+ way of knowing whether this host supports it. But the following
+ should work on the Alpha and on 32 bit machines. */
+
+ fprintf_filtered (stream, "0x%lx", (unsigned long)addr);
+}
+
/* Ask user a y-or-n question and return 1 iff answer is yes.
Takes three args which are given to printf to print the question.
The first, a control string, should end in "? ".
char *ctlstr;
register int answer;
register int ans2;
+ int retval;
/* Automatically answer "yes" if input is not from a terminal. */
if (!input_from_terminal_p ())
return 1;
+/* start-sanitize-mpw */
+#ifdef MPW
+ /* Automatically answer "yes" if called from MacGDB. */
+ if (mac_app)
+ return 1;
+#endif /* MPW */
+/* end-sanitize-mpw */
while (1)
{
+ wrap_here (""); /* Flush any buffered output */
+ gdb_flush (gdb_stdout);
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032pre-query\n");
+
va_start (args);
ctlstr = va_arg (args, char *);
- vfprintf (stdout, ctlstr, args);
+ vfprintf_filtered (gdb_stdout, ctlstr, args);
va_end (args);
- printf ("(y or n) ");
- fflush (stdout);
+ printf_filtered ("(y or n) ");
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032query\n");
+
+/* start-sanitize-mpw */
+#ifdef MPW
+ /* If not in MacGDB, move to a new line so the entered line doesn't
+ have a prompt on the front of it. */
+ if (!mac_app)
+ fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+/* end-sanitize-mpw */
+ gdb_flush (gdb_stdout);
answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
- return 1;
+ {
+ retval = 1;
+ break;
+ }
if (answer != '\n') /* Eat rest of input line, to EOF or newline */
do
{
if (answer >= 'a')
answer -= 040;
if (answer == 'Y')
- return 1;
+ {
+ retval = 1;
+ break;
+ }
if (answer == 'N')
- return 0;
- printf ("Please answer y or n.\n");
+ {
+ retval = 0;
+ break;
+ }
+ printf_filtered ("Please answer y or n.\n");
}
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032post-query\n");
+ return retval;
}
\f
}
}
\f
-/* Print the character C on STREAM as part of the contents
- of a literal string whose delimiter is QUOTER. */
+/* Print the character C on STREAM as part of the contents of a literal
+ string whose delimiter is QUOTER. Note that this routine should only
+ be call for printing things which are independent of the language
+ of the program being debugged. */
void
-printchar (c, stream, quoter)
+gdb_printchar (c, stream, quoter)
register int c;
FILE *stream;
int quoter;
{
- if (c < 040 || (sevenbit_strings && c >= 0177)) {
+ c &= 0xFF; /* Avoid sign bit follies */
+
+ if ( c < 0x20 || /* Low control chars */
+ (c >= 0x7F && c < 0xA0) || /* DEL, High controls */
+ (sevenbit_strings && c >= 0x80)) { /* high order bit set */
switch (c)
{
case '\n':
spit it out and forget about the wrap_here(). If we see another
wrap_here(), we spit it out and remember the newer one. If we see
the end of the line, we spit out a newline, the indent, and then
- the buffered output.
+ the buffered output. */
+
+/* Malloc'd buffer with chars_per_line+2 bytes. Contains characters which
+ are waiting to be output (they have already been counted in chars_printed).
+ When wrap_buffer[0] is null, the buffer is empty. */
+static char *wrap_buffer;
- wrap_column is the column number on the screen where wrap_buffer begins.
- When wrap_column is zero, wrapping is not in effect.
- wrap_buffer is malloc'd with chars_per_line+2 bytes.
- When wrap_buffer[0] is null, the buffer is empty.
- wrap_pointer points into it at the next character to fill.
- wrap_indent is the string that should be used as indentation if the
- wrap occurs. */
+/* Pointer in wrap_buffer to the next character to fill. */
+static char *wrap_pointer;
-static char *wrap_buffer, *wrap_pointer, *wrap_indent;
+/* String to indent by if the wrap occurs. Must not be NULL if wrap_column
+ is non-zero. */
+static char *wrap_indent;
+
+/* Column number on the screen where wrap_buffer begins, or 0 if wrapping
+ is not in effect. */
static int wrap_column;
/* ARGSUSED */
wrap_pointer = wrap_buffer; /* Start it at the beginning */
}
+/* Wait, so the user can read what's on the screen. Prompt the user
+ to continue by pressing RETURN. */
+
static void
prompt_for_continue ()
{
char *ignore;
+ char cont_prompt[120];
+
+ if (annotation_level > 1)
+ printf_unfiltered ("\n\032\032pre-prompt-for-continue\n");
+
+ strcpy (cont_prompt,
+ "---Type <return> to continue, or q <return> to quit---");
+ if (annotation_level > 1)
+ strcat (cont_prompt, "\n\032\032prompt-for-continue\n");
+
+ /* We must do this *before* we call gdb_readline, else it will eventually
+ call us -- thinking that we're trying to print beyond the end of the
+ screen. */
+ reinitialize_more_filter ();
immediate_quit++;
- ignore = gdb_readline ("---Type <return> to continue---");
+ /* On a real operating system, the user can quit with SIGINT.
+ But not on GO32.
+
+ 'q' is provided on all systems so users don't have to change habits
+ from system to system, and because telling them what to do in
+ the prompt is more user-friendly than expecting them to think of
+ SIGINT. */
+ /* Call readline, not gdb_readline, because GO32 readline handles control-C
+ whereas control-C to gdb_readline will cause the user to get dumped
+ out to DOS. */
+ ignore = readline (cont_prompt);
+
+ if (annotation_level > 1)
+ printf_unfiltered ("\n\032\032post-prompt-for-continue\n");
+
if (ignore)
- free (ignore);
- chars_printed = lines_printed = 0;
+ {
+ char *p = ignore;
+ while (*p == ' ' || *p == '\t')
+ ++p;
+ if (p[0] == 'q')
+ request_quit (SIGINT);
+ free (ignore);
+ }
immediate_quit--;
+
+ /* Now we have to do this again, so that GDB will know that it doesn't
+ need to save the ---Type <return>--- line at the top of the screen. */
+ reinitialize_more_filter ();
+
dont_repeat (); /* Forget prev cmd -- CR won't repeat it. */
}
/* Indicate that if the next sequence of characters overflows the line,
a newline should be inserted here rather than when it hits the end.
- If INDENT is nonzero, it is a string to be printed to indent the
+ If INDENT is non-null, it is a string to be printed to indent the
wrapped part on the next line. INDENT must remain accessible until
the next call to wrap_here() or until a newline is printed through
fputs_filtered().
we must not wrap words, but should still keep track of newlines
that were explicitly printed.
- INDENT should not contain tabs, as that
- will mess up the char count on the next line. FIXME. */
+ INDENT should not contain tabs, as that will mess up the char count
+ on the next line. FIXME.
+
+ This routine is guaranteed to force out any output which has been
+ squirreled away in the wrap_buffer, so wrap_here ((char *)0) can be
+ used to force out output from the wrap_buffer. */
void
wrap_here(indent)
- char *indent;
+ char *indent;
{
+ /* This should have been allocated, but be paranoid anyway. */
+ if (!wrap_buffer)
+ abort ();
+
if (wrap_buffer[0])
{
*wrap_pointer = '\0';
- fputs (wrap_buffer, stdout);
+ fputs_unfiltered (wrap_buffer, gdb_stdout);
}
wrap_pointer = wrap_buffer;
wrap_buffer[0] = '\0';
else if (chars_printed >= chars_per_line)
{
puts_filtered ("\n");
- puts_filtered (indent);
+ if (indent != NULL)
+ puts_filtered (indent);
wrap_column = 0;
}
else
{
wrap_column = chars_printed;
- wrap_indent = indent;
+ if (indent == NULL)
+ wrap_indent = "";
+ else
+ wrap_indent = indent;
}
}
-/* Like fputs but pause after every screenful, and can wrap at points
- other than the final character of a line.
- Unlike fputs, fputs_filtered does not return a value.
+/* Ensure that whatever gets printed next, using the filtered output
+ commands, starts at the beginning of the line. I.E. if there is
+ any pending output for the current line, flush it and start a new
+ line. Otherwise do nothing. */
+
+void
+begin_line ()
+{
+ if (chars_printed > 0)
+ {
+ puts_filtered ("\n");
+ }
+}
+
+
+GDB_FILE *
+gdb_fopen (name, mode)
+ char * name;
+ char * mode;
+{
+ return fopen (name, mode);
+}
+
+void
+gdb_flush (stream)
+ FILE *stream;
+{
+ fflush (stream);
+}
+
+/* Like fputs but if FILTER is true, pause after every screenful.
+
+ Regardless of FILTER can wrap at points other than the final
+ character of a line.
+
+ Unlike fputs, fputs_maybe_filtered does not return a value.
It is OK for LINEBUFFER to be NULL, in which case just don't print
anything.
- Note that a longjmp to top level may occur in this routine
- (since prompt_for_continue may do so) so this routine should not be
- called when cleanups are not in place. */
+ Note that a longjmp to top level may occur in this routine (only if
+ FILTER is true) (since prompt_for_continue may do so) so this
+ routine should not be called when cleanups are not in place. */
-void
-fputs_filtered (linebuffer, stream)
+static void
+fputs_maybe_filtered (linebuffer, stream, filter)
const char *linebuffer;
FILE *stream;
+ int filter;
{
const char *lineptr;
return;
/* Don't do any filtering if it is disabled. */
- if (stream != stdout
+ if (stream != gdb_stdout
|| (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
{
- fputs (linebuffer, stream);
+ fputs_unfiltered (linebuffer, stream);
return;
}
while (*lineptr)
{
/* Possible new page. */
- if (lines_printed >= lines_per_page - 1)
+ if (filter &&
+ (lines_printed >= lines_per_page - 1))
prompt_for_continue ();
while (*lineptr && *lineptr != '\n')
if (wrap_column)
*wrap_pointer++ = '\t';
else
- putc ('\t', stream);
+ fputc_unfiltered ('\t', stream);
/* Shifting right by 3 produces the number of tab stops
we have already passed, and then adding one and
shifting left 3 advances to the next tab stop. */
if (wrap_column)
*wrap_pointer++ = *lineptr;
else
- putc (*lineptr, stream);
+ fputc_unfiltered (*lineptr, stream);
chars_printed++;
lineptr++;
}
if chars_per_line is right, we probably just overflowed
anyway; if it's wrong, let us keep going. */
if (wrap_column)
- putc ('\n', stream);
+ fputc_unfiltered ('\n', stream);
/* Possible new page. */
if (lines_printed >= lines_per_page - 1)
/* Now output indentation and wrapped string */
if (wrap_column)
{
- if (wrap_indent)
- fputs (wrap_indent, stream);
- *wrap_pointer = '\0'; /* Null-terminate saved stuff */
- fputs (wrap_buffer, stream); /* and eject it */
+ fputs_unfiltered (wrap_indent, stream);
+ *wrap_pointer = '\0'; /* Null-terminate saved stuff */
+ fputs_unfiltered (wrap_buffer, stream); /* and eject it */
/* FIXME, this strlen is what prevents wrap_indent from
containing tabs. However, if we recurse to print it
and count its chars, we risk trouble if wrap_indent is
chars_printed = 0;
wrap_here ((char *)0); /* Spit out chars, cancel further wraps */
lines_printed++;
- putc ('\n', stream);
+ fputc_unfiltered ('\n', stream);
lineptr++;
}
}
}
-
-/* fputs_demangled is a variant of fputs_filtered that
- demangles g++ names.*/
-
void
-fputs_demangled (linebuffer, stream, arg_mode)
- char *linebuffer;
+fputs_filtered (linebuffer, stream)
+ const char *linebuffer;
FILE *stream;
- int arg_mode;
{
-#define SYMBOL_MAX 1024
-
-#define SYMBOL_CHAR(c) (isascii(c) \
- && (isalnum(c) || (c) == '_' || (c) == CPLUS_MARKER))
-
- char buf[SYMBOL_MAX+1];
-# define SLOP 5 /* How much room to leave in buf */
- char *p;
-
- if (linebuffer == NULL)
- return;
-
- /* If user wants to see raw output, no problem. */
- if (!demangle) {
- fputs_filtered (linebuffer, stream);
- return;
- }
-
- p = linebuffer;
-
- while ( *p != (char) 0 ) {
- int i = 0;
+ fputs_maybe_filtered (linebuffer, stream, 1);
+}
- /* collect non-interesting characters into buf */
- while ( *p != (char) 0 && !SYMBOL_CHAR(*p) && i < (int)sizeof(buf)-SLOP ) {
- buf[i++] = *p;
- p++;
- }
- if (i > 0) {
- /* output the non-interesting characters without demangling */
- buf[i] = (char) 0;
- fputs_filtered(buf, stream);
- i = 0; /* reset buf */
- }
+void
+putc_unfiltered (c)
+ int c;
+{
+ char buf[2];
+ buf[0] = c;
+ buf[1] = 0;
+ fputs_unfiltered (buf, gdb_stdout);
+}
- /* and now the interesting characters */
- while (i < SYMBOL_MAX
- && *p != (char) 0
- && SYMBOL_CHAR(*p)
- && i < (int)sizeof(buf) - SLOP) {
- buf[i++] = *p;
- p++;
- }
- buf[i] = (char) 0;
- if (i > 0) {
- char * result;
-
- if ( (result = cplus_demangle(buf, arg_mode)) != NULL ) {
- fputs_filtered(result, stream);
- free(result);
- }
- else {
- fputs_filtered(buf, stream);
- }
- }
- }
+void
+fputc_unfiltered (c, stream)
+ int c;
+ FILE * stream;
+{
+ char buf[2];
+ buf[0] = c;
+ buf[1] = 0;
+ fputs_unfiltered (buf, stream);
}
+
/* Print a variable number of ARGS using format FORMAT. If this
information is going to put the amount written (since the last call
- to INITIALIZE_MORE_FILTER or the last page break) over the page size,
- print out a pause message and do a gdb_readline to get the users
- permision to continue.
+ to REINITIALIZE_MORE_FILTER or the last page break) over the page size,
+ call prompt_for_continue to get the users permision to continue.
Unlike fprintf, this function does not return a value.
We implement three variants, vfprintf (takes a vararg list and stream),
fprintf (takes a stream to write on), and printf (the usual).
- Note that this routine has a restriction that the length of the
- final output line must be less than 255 characters *or* it must be
- less than twice the size of the format string. This is a very
- arbitrary restriction, but it is an internal restriction, so I'll
- put it in. This means that the %s format specifier is almost
- useless; unless the caller can GUARANTEE that the string is short
- enough, fputs_filtered should be used instead.
-
Note also that a longjmp to top level may occur in this routine
(since prompt_for_continue may do so) so this routine should not be
called when cleanups are not in place. */
static void
+vfprintf_maybe_filtered (stream, format, args, filter)
+ FILE *stream;
+ char *format;
+ va_list args;
+ int filter;
+{
+ char *linebuffer;
+ struct cleanup *old_cleanups;
+
+ vasprintf (&linebuffer, format, args);
+ if (linebuffer == NULL)
+ {
+ fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+ exit (1);
+ }
+ old_cleanups = make_cleanup (free, linebuffer);
+ fputs_maybe_filtered (linebuffer, stream, filter);
+ do_cleanups (old_cleanups);
+}
+
+
+void
vfprintf_filtered (stream, format, args)
FILE *stream;
char *format;
va_list args;
{
- static char *linebuffer = (char *) 0;
- static int line_size;
- int format_length;
+ vfprintf_maybe_filtered (stream, format, args, 1);
+}
- format_length = strlen (format);
+void
+vfprintf_unfiltered (stream, format, args)
+ FILE *stream;
+ char *format;
+ va_list args;
+{
+ char *linebuffer;
+ struct cleanup *old_cleanups;
- /* Allocated linebuffer for the first time. */
- if (!linebuffer)
+ vasprintf (&linebuffer, format, args);
+ if (linebuffer == NULL)
{
- linebuffer = (char *) xmalloc (255);
- line_size = 255;
+ fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+ exit (1);
}
+ old_cleanups = make_cleanup (free, linebuffer);
+ fputs_unfiltered (linebuffer, stream);
+ do_cleanups (old_cleanups);
+}
- /* Reallocate buffer to a larger size if this is necessary. */
- if (format_length * 2 > line_size)
- {
- line_size = format_length * 2;
+void
+vprintf_filtered (format, args)
+ char *format;
+ va_list args;
+{
+ vfprintf_maybe_filtered (gdb_stdout, format, args, 1);
+}
- /* You don't have to copy. */
- free (linebuffer);
- linebuffer = (char *) xmalloc (line_size);
- }
+void
+vprintf_unfiltered (format, args)
+ char *format;
+ va_list args;
+{
+ vfprintf_unfiltered (gdb_stdout, format, args);
+}
+/* VARARGS */
+void
+fprintf_filtered (va_alist)
+ va_dcl
+{
+ va_list args;
+ FILE *stream;
+ char *format;
- /* This won't blow up if the restrictions described above are
- followed. */
- (void) vsprintf (linebuffer, format, args);
+ va_start (args);
+ stream = va_arg (args, FILE *);
+ format = va_arg (args, char *);
- fputs_filtered (linebuffer, stream);
+ vfprintf_filtered (stream, format, args);
+ va_end (args);
}
/* VARARGS */
void
-fprintf_filtered (va_alist)
+fprintf_unfiltered (va_alist)
va_dcl
{
+ va_list args;
FILE *stream;
char *format;
+
+ va_start (args);
+ stream = va_arg (args, FILE *);
+ format = va_arg (args, char *);
+
+ vfprintf_unfiltered (stream, format, args);
+ va_end (args);
+}
+
+/* Like fprintf_filtered, but prints its result indented.
+ Called as fprintfi_filtered (spaces, stream, format, ...); */
+
+/* VARARGS */
+void
+fprintfi_filtered (va_alist)
+ va_dcl
+{
va_list args;
+ int spaces;
+ FILE *stream;
+ char *format;
va_start (args);
+ spaces = va_arg (args, int);
stream = va_arg (args, FILE *);
format = va_arg (args, char *);
+ print_spaces_filtered (spaces, stream);
- /* This won't blow up if the restrictions described above are
- followed. */
vfprintf_filtered (stream, format, args);
va_end (args);
}
+
/* VARARGS */
void
printf_filtered (va_alist)
va_start (args);
format = va_arg (args, char *);
- vfprintf_filtered (stdout, format, args);
+ vfprintf_filtered (gdb_stdout, format, args);
va_end (args);
}
-/* Easy */
+
+/* VARARGS */
+void
+printf_unfiltered (va_alist)
+ va_dcl
+{
+ va_list args;
+ char *format;
+
+ va_start (args);
+ format = va_arg (args, char *);
+
+ vfprintf_unfiltered (gdb_stdout, format, args);
+ va_end (args);
+}
+
+/* Like printf_filtered, but prints it's result indented.
+ Called as printfi_filtered (spaces, format, ...); */
+
+/* VARARGS */
+void
+printfi_filtered (va_alist)
+ va_dcl
+{
+ va_list args;
+ int spaces;
+ char *format;
+
+ va_start (args);
+ spaces = va_arg (args, int);
+ format = va_arg (args, char *);
+ print_spaces_filtered (spaces, gdb_stdout);
+ vfprintf_filtered (gdb_stdout, format, args);
+ va_end (args);
+}
+
+/* Easy -- but watch out!
+
+ This routine is *not* a replacement for puts()! puts() appends a newline.
+ This one doesn't, and had better not! */
void
puts_filtered (string)
char *string;
{
- fputs_filtered (string, stdout);
+ fputs_filtered (string, gdb_stdout);
+}
+
+void
+puts_unfiltered (string)
+ char *string;
+{
+ fputs_unfiltered (string, gdb_stdout);
}
/* Return a pointer to N spaces and a null. The pointer is good
\f
/* C++ demangler stuff. */
-/* Print NAME on STREAM, demangling if necessary. */
+/* fprintf_symbol_filtered attempts to demangle NAME, a symbol in language
+ LANG, using demangling args ARG_MODE, and print it filtered to STREAM.
+ If the name is not mangled, or the language for the name is unknown, or
+ demangling is off, the name is printed in its "raw" form. */
+
void
-fprint_symbol (stream, name)
+fprintf_symbol_filtered (stream, name, lang, arg_mode)
FILE *stream;
char *name;
+ enum language lang;
+ int arg_mode;
{
char *demangled;
- if ((!demangle) || NULL == (demangled = cplus_demangle (name, 1)))
- fputs_filtered (name, stream);
- else
+
+ if (name != NULL)
+ {
+ /* If user wants to see raw output, no problem. */
+ if (!demangle)
+ {
+ fputs_filtered (name, stream);
+ }
+ else
+ {
+ switch (lang)
+ {
+ case language_cplus:
+ demangled = cplus_demangle (name, arg_mode);
+ break;
+ case language_chill:
+ demangled = chill_demangle (name);
+ break;
+ default:
+ demangled = NULL;
+ break;
+ }
+ fputs_filtered (demangled ? demangled : name, stream);
+ if (demangled != NULL)
+ {
+ free (demangled);
+ }
+ }
+ }
+}
+
+/* Do a strcmp() type operation on STRING1 and STRING2, ignoring any
+ differences in whitespace. Returns 0 if they match, non-zero if they
+ don't (slightly different than strcmp()'s range of return values).
+
+ As an extra hack, string1=="FOO(ARGS)" matches string2=="FOO".
+ This "feature" is useful when searching for matching C++ function names
+ (such as if the user types 'break FOO', where FOO is a mangled C++
+ function). */
+
+int
+strcmp_iw (string1, string2)
+ const char *string1;
+ const char *string2;
+{
+ while ((*string1 != '\0') && (*string2 != '\0'))
{
- fputs_filtered (demangled, stream);
- free (demangled);
+ while (isspace (*string1))
+ {
+ string1++;
+ }
+ while (isspace (*string2))
+ {
+ string2++;
+ }
+ if (*string1 != *string2)
+ {
+ break;
+ }
+ if (*string1 != '\0')
+ {
+ string1++;
+ string2++;
+ }
}
+ return (*string1 != '\0' && *string1 != '(') || (*string2 != '\0');
}
+
\f
void
_initialize_utils ()
/* These defaults will be used if we are unable to get the correct
values from termcap. */
+#if defined(__GO32__)
+ lines_per_page = ScreenRows();
+ chars_per_line = ScreenCols();
+#else
lines_per_page = 24;
chars_per_line = 80;
+/* start-sanitize-mpw */
+#ifndef MPW
+ /* No termcap under MPW, although might be cool to do something
+ by looking at worksheet or console window sizes. */
+/* end-sanitize-mpw */
/* Initialize the screen height and width from termcap. */
{
char *termtype = getenv ("TERM");
}
}
}
+/* start-sanitize-mpw */
+#endif /* MPW */
+/* end-sanitize-mpw */
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+ /* If there is a better way to determine the window size, use it. */
+ SIGWINCH_HANDLER ();
+#endif
+#endif
/* If the output is not a terminal, don't paginate it. */
- if (!ISATTY (stdout))
+ if (!ISATTY (gdb_stdout))
lines_per_page = UINT_MAX;
set_width_command ((char *)NULL, 0, c);
&setprintlist),
&showprintlist);
}
+
+/* Machine specific function to handle SIGWINCH signal. */
+
+#ifdef SIGWINCH_HANDLER_BODY
+ SIGWINCH_HANDLER_BODY
+#endif
+
projects / binutils.git / blobdiff