-2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
+2016-03-02 Alan Modra <amodra@gmail.com>
- * aarch64-asm-2.c: Regenerate.
- * aarch64-dis-2.c: Regenerate.
- * aarch64-dis.c: Weaken assert.
- * aarch64-gen.c: Include the instruction in the list of its
- possible aliases.
-
-
- * aarch64-opc.c (aarch64_sys_regs): Add "id_aa64mmfr2_el1".
- (aarch64_sys_reg_supported_p): Add ARMv8.2 system register
- feature test.
-
-
- * arm-dis.c (print_insn): Also set is_thumb for Mach-O.
-
-
- * aarch64-opc.c (aarch64_sys_regs): Add spsr_el12, elr_el12,
- sctlr_el12, cpacr_el12, ttbr1_el2, ttbr0_el12, ttbr1_el12,
- tcr_el12, afsr0_el12, afsr1_el12, esr_el12, far_el12, mair_el12,
- amair_el12, vbar_el12, contextidr_el2, contextidr_el12,
- cntkctl_el12, cntp_tval_el02, cntp_ctl_el02, cntp_cval_el02,
- cntv_tval_el02, cntv_ctl_el02, cntv_cval_el02, cnthv_tval_el2,
- cnthv_ctl_el2, cnthv_cval_el2.
- (aarch64_sys_reg_supported_p): Update for the new system
- registers.
-
-
- PR binutils/19224
- * h8300-dis.c (bfd_h8_disassemble): Remove redundant if clause.
-
-
- * po/zh_CN.po: Updated simplified Chinese translation.
-
-
- * aarch64-opc.c (operand_general_constraint_met_p): Check validity
- of MSR PAN immediate operand.
-
-
- * rx-dis.c (condition_names): Replace always and never with
- invalid, since the always/never conditions can never be legal.
-
-
- * configure: Regenerate.
-
-
- * ppc-dis.c (ppc_opts): Add "power9" and "pwr9" entries.
- Add PPC_OPCODE_VSX3 to the vsx entry.
- (powerpc_init_dialect): Set default dialect to power9.
- * ppc-opc.c (insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd,
- insert_dxdn, extract_dxdn, insert_l0, extract_l0, insert_l1,
- extract_l1 insert_xtq6, extract_xtq6): New static functions.
- (insert_esync): Test for illegal L operand value.
- (DCMX, DCMXS, DXD, NDXD, L0, L1, RC, FC, UIM6, X_R, RIC, PRS, XSQ6,
- XTQ6, LRAND, IMM8, DQX, DQX_MASK, DX, DX_MASK, VXVAPS_MASK, VXVA,XVA,
- XX2VA, XVARC, XBF_MASK, XX2UIM4_MASK, XX2BFD_MASK, XX2DCMXS_MASK,
- XVA_MASK, XRLA_MASK, XBFRARB_MASK, XLRAND_MASK, POWER9, PPCVEC3,
- PPCVSX3): New defines.
- (powerpc_opcodes) <ps_cmpu0, ps_cmpo0, ps_cmpu1, ps_cmpo1, fcmpu,
- fcmpo, ftdiv, ftsqrt>: Use XBF_MASK.
- <mcrxr>: Use XBFRARB_MASK.
- <addpcis, bcdcfn., bcdcfsq., bcdcfz., bcdcpsgn., bcdctn., bcdctsq.,
- bcdctz., bcds., bcdsetsgn., bcdsr., bcdtrunc., bcdus., bcdutrunc.,
- cmpeqb, cmprb, cnttzd, cnttzd., cnttzw, cnttzw., copy, copy_first,
- cp_abort, darn, dtstsfi, dtstsfiq, extswsli, extswsli., ldat, ldmx,
- lwat, lxsd, lxsibzx, lxsihzx, lxssp, lxv, lxvb16x, lxvh8x, lxvl, lxvll,
- lxvwsx, lxvx, maddhd, maddhdu, maddld, mcrxrx, mfvsrld, modsd, modsw,
- modud, moduw, msgsync, mtvsrdd, mtvsrws, paste, paste., paste_last,
- rmieg, setb, slbieg, slbsync, stdat, stop, stwat, stxsd, stxsibx,
- stxsihx, stxssp, stxv, stxvb16x, stxvh8x, stxvl, stxvll, stxvx,
- subpcis, urfid, vbpermd, vclzlsbb, vcmpneb, vcmpneb., vcmpneh,
- vcmpneh., vcmpnew, vcmpnew., vcmpnezb, vcmpnezb., vcmpnezh, vcmpnezh.,
- vcmpnezw, vcmpnezw., vctzb, vctzd, vctzh, vctzlsbb, vctzw, vextractd,
- vextractub, vextractuh, vextractuw, vextsb2d, vextsb2w, vextsh2d,
- vextsh2w, vextsw2d, vextublx, vextubrx, vextuhlx, vextuhrx, vextuwlx,
- vextuwrx, vinsertb, vinsertd, vinserth, vinsertw, vmul10cuq,
- vmul10ecuq, vmul10euq, vmul10uq, vnegd, vnegw, vpermr, vprtybd,
- vprtybq, vprtybw, vrldmi, vrldnm, vrlwmi, vrlwnm, vslv, vsrv, wait,
- xsabsqp, xsaddqp, xsaddqpo, xscmpeqdp, xscmpexpdp, xscmpexpqp,
- xscmpgedp, xscmpgtdp, xscmpnedp, xscmpoqp, xscmpuqp, xscpsgnqp,
- xscvdphp, xscvdpqp, xscvhpdp, xscvqpdp, xscvqpdpo, xscvqpsdz,
- xscvqpswz, xscvqpudz, xscvqpuwz, xscvsdqp, xscvudqp, xsdivqp,
- xsdivqpo, xsiexpdp, xsiexpqp, xsmaddqp, xsmaddqpo, xsmaxcdp,
- xsmaxjdp, xsmincdp, xsminjdp, xsmsubqp, xsmsubqpo, xsmulqp, xsmulqpo,
- xsnabsqp, xsnegqp, xsnmaddqp, xsnmaddqpo, xsnmsubqp, xsnmsubqpo,
- xsrqpi, xsrqpix, xsrqpxp, xssqrtqp, xssqrtqpo, xssubqp, xssubqpo,
- xststdcdp, xststdcqp, xststdcsp, xsxexpdp, xsxexpqp, xsxsigdp,
- xsxsigqp, xvcmpnedp, xvcmpnedp., xvcmpnesp, xvcmpnesp., xvcvhpsp,
- xvcvsphp, xviexpdp, xviexpsp, xvtstdcdp, xvtstdcsp, xvxexpdp,
- xvxexpsp, xvxsigdp, xvxsigsp, xxbrd, xxbrh, xxbrq, xxbrw, xxextractuw,
- xxinsertw, xxperm, xxpermr, xxspltib>: New instructions.
- <doze, nap, sleep, rvwinkle, waitasec, lxvx, stxvx>: Disable on POWER9.
- <tlbiel, tlbie, sync, slbmfev, slbmfee>: Add additional operands.
-
-
- * rx-decode.opc (rx_decode_opcode): Decode extra NOP
- instructions.
- * rx-decode.c: Regenerate.
-
-
- * rx-decode.opc (rx_disp): If the displacement is zero, set the
- type to RX_Operand_Zero_Indirect.
- * rx-decode.c: Regenerate.
- * rx-dis (print_insn): Handle RX_Operand_Zero_Indirect.
-
-
- * aarch64-dis.c (aarch64_decode_insn): Add one argument
- noaliases_p. Update comments. Pass noaliases_p rather than
- no_aliases to aarch64_opcode_decode.
- (print_insn_aarch64_word): Pass no_aliases to
- aarch64_decode_insn.
-
-
- PR binutils/19159
- * rl78-decode.opc (MOV): Added offset to DE register in index
- addressing mode.
+ * or1k-desc.h: Regenerate.
+ * fr30-ibld.c: Regenerate.
* rl78-decode.c: Regenerate.
-
- PR binutils/19158
- * rl78-decode.opc: Add 's' print operator to instructions that
- access system registers.
- * rl78-decode.c: Regenerate.
- * rl78-dis.c (print_insn_rl78_common): Decode all system
- registers.
-
-
- PR binutils/19157
- * rl78-decode.opc: Add 'a' print operator to mov instructions
- using stack pointer plus index addressing.
- * rl78-decode.c: Regenerate.
-
-
- * s390-opc.c: Fix comment.
- * s390-opc.txt: Change instruction type for troo, trot, trto, and
- trtt to RRF_U0RER since the second parameter does not need to be a
- register pair.
-
-
- * arc-dis.c (print_insn_arc): Initiallise insn array.
-
-
- * aarch64-dis.c (aarch64_ext_sysins_op): Access field
- 'name' rather than 'template'.
- * aarch64-opc.c (aarch64_print_operand): Likewise.
-
-
- * arc-dis.c: Revamped file for ARC support
- * arc-dis.h: Likewise.
- * arc-ext.c: Likewise.
- * arc-ext.h: Likewise.
- * arc-opc.c: Likewise.
- * arc-fxi.h: New file.
- * arc-regs.h: Likewise.
- * arc-tbl.h: Likewise.
-
-
- * aarch64-dis.c (disas_aarch64_insn): Remove static. Change
- argument insn type to aarch64_insn. Rename to ...
- (aarch64_decode_insn): ... it.
- (print_insn_aarch64_word): Caller updated.
-
-
- * aarch64-dis.c (disas_aarch64_insn): Remove argument PC.
- (print_insn_aarch64_word): Caller updated.
-
-
- * s390-mkopc.c (main): Parse htm and vx flag.
- * s390-opc.txt: Mark instructions from the hardware transactional
- memory and vector facilities with the "htm"/"vx" flag.
-
-
- * po/de.po: Updated German translation.
-
-
- * ppc-opc.c (PPC500): Mark some opcodes as invalid
-
-
- * bfin-dis.c (fmtconst): Remove unnecessary call to the abs
- function.
- * tic30-dis.c (print_branch): Likewise.
- * cgen-asm.c (cgen_parse_signed_integer): Cast integer to signed
- value before left shifting.
- * fr30-ibld.c (fr30_cgen_extract_operand): Likewise.
- * hppa-dis.c (print_insn_hppa): Likewise.
- * mips-dis.c (mips_cp0sel_names_mipsr5900): Delete unused static
- array.
- * msp430-dis.c (msp430_singleoperand): Likewise.
- (msp430_doubleoperand): Likewise.
- (print_insn_msp430): Likewise.
- * nds32-asm.c (parse_operand): Likewise.
- * sh-opc.h (MASK): Likewise.
- * v850-dis.c (get_operand_value): Likewise.
-
-
- * rx-decode.opc (bwl): Use RX_Bad_Size.
- (sbwl): Likewise.
- (ubwl): Likewise. Rename to ubw.
- (uBWL): Rename to uBW.
- Replace all references to uBWL with uBW.
- * rx-decode.c: Regenerate.
- * rx-dis.c (size_names): Add entry for RX_Bad_Size.
- (opsize_names): Likewise.
- (print_insn_rx): Detect and report RX_Bad_Size.
-
-
- * ppc-opc.c (powerpc_opcodes): Add mfdscr, mfctrl, mtdscr and mtctrl.
+ PR target/19747
+ * rl78-dis.c (print_insn_rl78_common): Fix typo.
- * sparc-dis.c (print_insn_sparc): Handle the privileged register
- %pmcdper.
+ * arm-dis.c (coprocessor_opcodes): Add fp16 instruction entries.
+ (print_insn_coprocessor): Support fp16 instructions.
- * i386-dis.c (print_insn): Fix decoding of three byte operands.
+ * arm-dis.c (print_insn_coprocessor): Fix mask for vsel, vmaxnm,
+ vminnm, vrint(mpna).
- PR binutils/18257
- * i386-dis.c: Use MOD_TABLE for most of mask instructions.
- (MOD enum): Add MOD_VEX_W_0_0F41_P_0_LEN_1,
- MOD_VEX_W_1_0F41_P_0_LEN_1, MOD_VEX_W_0_0F41_P_2_LEN_1,
- MOD_VEX_W_1_0F41_P_2_LEN_1, MOD_VEX_W_0_0F42_P_0_LEN_1,
- MOD_VEX_W_1_0F42_P_0_LEN_1, MOD_VEX_W_0_0F42_P_2_LEN_1,
- MOD_VEX_W_1_0F42_P_2_LEN_1, MOD_VEX_W_0_0F44_P_0_LEN_1,
- MOD_VEX_W_1_0F44_P_0_LEN_1, MOD_VEX_W_0_0F44_P_2_LEN_1,
- MOD_VEX_W_1_0F44_P_2_LEN_1, MOD_VEX_W_0_0F45_P_0_LEN_1,
- MOD_VEX_W_1_0F45_P_0_LEN_1, MOD_VEX_W_0_0F45_P_2_LEN_1,
- MOD_VEX_W_1_0F45_P_2_LEN_1, MOD_VEX_W_0_0F46_P_0_LEN_1,
- MOD_VEX_W_1_0F46_P_0_LEN_1, MOD_VEX_W_0_0F46_P_2_LEN_1,
- MOD_VEX_W_1_0F46_P_2_LEN_1, MOD_VEX_W_0_0F47_P_0_LEN_1,
- MOD_VEX_W_1_0F47_P_0_LEN_1, MOD_VEX_W_0_0F47_P_2_LEN_1,
- MOD_VEX_W_1_0F47_P_2_LEN_1, MOD_VEX_W_0_0F4A_P_0_LEN_1,
- MOD_VEX_W_1_0F4A_P_0_LEN_1, MOD_VEX_W_0_0F4A_P_2_LEN_1,
- MOD_VEX_W_1_0F4A_P_2_LEN_1, MOD_VEX_W_0_0F4B_P_0_LEN_1,
- MOD_VEX_W_1_0F4B_P_0_LEN_1, MOD_VEX_W_0_0F4B_P_2_LEN_1,
- MOD_VEX_W_0_0F91_P_0_LEN_0, MOD_VEX_W_1_0F91_P_0_LEN_0,
- MOD_VEX_W_0_0F91_P_2_LEN_0, MOD_VEX_W_1_0F91_P_2_LEN_0,
- MOD_VEX_W_0_0F92_P_0_LEN_0, MOD_VEX_W_0_0F92_P_2_LEN_0,
- MOD_VEX_W_0_0F92_P_3_LEN_0, MOD_VEX_W_1_0F92_P_3_LEN_0,
- MOD_VEX_W_0_0F93_P_0_LEN_0, MOD_VEX_W_0_0F93_P_2_LEN_0,
- MOD_VEX_W_0_0F93_P_3_LEN_0, MOD_VEX_W_1_0F93_P_3_LEN_0,
- MOD_VEX_W_0_0F98_P_0_LEN_0, MOD_VEX_W_1_0F98_P_0_LEN_0,
- MOD_VEX_W_0_0F98_P_2_LEN_0, MOD_VEX_W_1_0F98_P_2_LEN_0,
- MOD_VEX_W_0_0F99_P_0_LEN_0, MOD_VEX_W_1_0F99_P_0_LEN_0,
- MOD_VEX_W_0_0F99_P_2_LEN_0, MOD_VEX_W_1_0F99_P_2_LEN_0,
- MOD_VEX_W_0_0F3A30_P_2_LEN_0, MOD_VEX_W_1_0F3A30_P_2_LEN_0,
- MOD_VEX_W_0_0F3A31_P_2_LEN_0, MOD_VEX_W_1_0F3A31_P_2_LEN_0,
- MOD_VEX_W_0_0F3A32_P_2_LEN_0, MOD_VEX_W_1_0F3A32_P_2_LEN_0,
- MOD_VEX_W_0_0F3A33_P_2_LEN_0, MOD_VEX_W_1_0F3A33_P_2_LEN_0.
- (vex_w_table): Replace terminals with MOD_TABLE entries for
- most of mask instructions.
-
-
- * cgen.sh: Trim trailing space from cgen output.
- * ia64-gen.c (print_dependency_table): Don't generate trailing space.
- (print_dis_table): Likewise.
- * opc2c.c (dump_lines): Likewise.
- (orig_filename): Warning fix.
- * ia64-asmtab.c: Regenerate.
-
-
- * arm-dis.c (print_insn_arm): Disassembling for all targets V6
- and higher with ARM instruction set will now mark the 26-bit
- versions of teq,tst,cmn and cmp as UNPREDICTABLE.
- (arm_opcodes): Fix for unpredictable nop being recognized as a
- teq.
-
-
- * micromips-opc.c (micromips_opcodes): Re-order table so that move
- based on 'or' is first.
- * mips-opc.c (mips_builtin_opcodes): Ditto.
-
-
- PR 18800
- * aarch64-tbl.h (aarch64_opcode_table): Fix mask for SIMD EXT
- instruction.
-
-
- * mips-opc.c (mips_builtin_opcodes): Add "sigrie".
-
-
- * i386-gen.c: Remove CpuFMA4 from CPU_ZNVER1_FLAGS.
- * i386-init.h: Regenerated.
-
-
- PR binutils/13571
- * i386-dis.c (MOD_0FC3): New.
- (PREFIX_0FC3): Renamed to ...
- (PREFIX_MOD_0_0FC3): This.
- (dis386_twobyte): Replace PREFIX_0FC3 with MOD_0FC3.
- (prefix_table): Replace Ma with Ev on movntiS.
- (mod_table): Add MOD_0FC3.
-
-
- * configure: Regenerated.
-
-
- PR 18708
- * i386-dis.c (get64): Avoid signed integer overflow.
-
-
- PR binutils/18631
- * i386-dis-evex.h (EVEX_W_0F78_P_2): Replace "EXxmmq" with
- "EXEvexHalfBcstXmmq" for the second operand.
- (EVEX_W_0F79_P_2): Likewise.
- (EVEX_W_0F7A_P_2): Likewise.
- (EVEX_W_0F7B_P_2): Likewise.
-
-
- * arm-dis.c (print_insn_coprocessor): Added support for quarter
- float bitfield format.
- (coprocessor_opcodes): Changed VFP vmov reg,immediate to use new
- quarter float bitfield format.
-
-
- * configure: Regenerated.
-
- * ppc-opc.c (PPC750, PPC7450, PPC860): Define using PPC_OPCODE_*.
- * ppc-dis.c (ppc_opts): Add 821, 850 and 860 entries. Add
- PPC_OPCODE_7450 to 7450 entry. Add PPC_OPCODE_750 to 750cl entry.
+ * arm-dis.c (print_insn_coprocessor): Check co-processor number for
+ cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.
- * nios2-dis.c (nios2_extract_opcode): New.
- (nios2_disassembler_state): New.
- (nios2_find_opcode_hash): Use mach parameter to select correct
- disassembler state.
- (nios2_print_insn_arg): Extend to support new R2 argument letters
- and formats.
- (print_insn_nios2): Check for 16-bit instruction at end of memory.
- * nios2-opc.c (nios2_builtin_regs): Add R2 register attributes.
- (NIOS2_NUM_OPCODES): Rename to...
- (NIOS2_NUM_R1_OPCODES): This.
- (nios2_r2_opcodes): New.
- (NIOS2_NUM_R2_OPCODES): New.
- (nios2_num_r2_opcodes): New.
- (nios2_r2_asi_n_mappings, nios2_num_r2_asi_n_mappings): New.
- (nios2_r2_shi_n_mappings, nios2_num_r2_shi_n_mappings): New.
- (nios2_r2_andi_n_mappings, nios2_num_r2_andi_n_mappings): New.
- (nios2_r2_reg3_mappings, nios2_num_r2_reg3_mappings): New.
- (nios2_r2_reg_range_mappings, nios2_num_r2_reg_range_mappings): New.
+ * i386-dis.c (print_insn): Parenthesize expression to prevent
+ truncated addresses.
+ (OP_J): Likewise.
- * i386-dis.c (OP_Mwaitx): New.
- (rm_table): Add monitorx/mwaitx.
- * i386-gen.c (cpu_flag_init): Add CpuMWAITX to CPU_BDVER4_FLAGS
- and CPU_ZNVER1_FLAGS. Add CPU_MWAITX_FLAGS.
- (operand_type_init): Add CpuMWAITX.
- * i386-opc.h (CpuMWAITX): New.
- (i386_cpu_flags): Add cpumwaitx.
- * i386-opc.tbl: Add monitorx and mwaitx.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
+ * arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New
+ variable.
+2016-02-04 Nick Clifton <nickc@redhat.com>
- * ppc-opc.c (insert_ls): Test for invalid LS operands.
- (insert_esync): New function.
- (LS, WC): Use insert_ls.
- (ESYNC): Use insert_esync.
+ PR target/19561
+ * msp430-dis.c (print_insn_msp430): Add a special case for
+ decoding an RRC instruction with the ZC bit set in the extension
+ word.
-2015-06-22 Nick Clifton <nickc@redhat.com>
+2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
- * dis-buf.c (buffer_read_memory): Fail is stop_vma is set and the
- requested region lies beyond it.
- * bfin-dis.c (print_insn_bfin): Ignore sysop instructions when
- looking for 32-bit insns.
- * mcore-dis.c (print_insn_mcore): Disable stop_vma when reading
- data.
- * sh-dis.c (print_insn_sh): Likewise.
- * tic6x-dis.c (print_insn_tic6x): Disable stop_vma when reading
- blocks of instructions.
- * vax-dis.c (print_insn_vax): Check that the requested address
- does not clash with the stop_vma.
+ * cgen-ibld.in (insert_normal): Rework calculation of shift.
+ * epiphany-ibld.c: Regenerate.
+ * fr30-ibld.c: Regenerate.
+ * frv-ibld.c: Regenerate.
+ * ip2k-ibld.c: Regenerate.
+ * iq2000-ibld.c: Regenerate.
+ * lm32-ibld.c: Regenerate.
+ * m32c-ibld.c: Regenerate.
+ * m32r-ibld.c: Regenerate.
+ * mep-ibld.c: Regenerate.
+ * mt-ibld.c: Regenerate.
+ * or1k-ibld.c: Regenerate.
+ * xc16x-ibld.c: Regenerate.
+ * xstormy16-ibld.c: Regenerate.
+2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
- * ppc-dis.h (skip_optional_operands): Use ppc_optional_operand_value.
- * ppc-opc.c (FXM4): Add non-zero optional value.
- (TBR): Likewise.
- (SXL): Likewise.
- (insert_fxm): Handle new default operand value.
- (extract_fxm): Likewise.
- (insert_tbr): Likewise.
- (extract_tbr): Likewise.
+ * epiphany-dis.c: Regenerated from latest cpu files.
-2015-06-16 Matthew Wahab <matthew.wahab@arm.com>
+2016-02-01 Michael McConville <mmcco@mykolab.com>
- * arch64-opc.c (aarch64_sys_regs): Add "id_mmfr4_el1".
+ * cgen-dis.c (count_decodable_bits): Use unsigned value for mask
+ test bit.
-2015-06-16 Szabolcs Nagy <szabolcs.nagy@arm.com>
+2016-01-25 Renlin Li <renlin.li@arm.com>
- * arm-dis.c (print_insn_coprocessor): Avoid negative shift.
+ * arm-dis.c (mapping_symbol_for_insn): New function.
+ (find_ifthen_state): Call mapping_symbol_for_insn().
+2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
- * ppc-opc.c: Add comment accidentally removed by old commit.
- (MTMSRD_L): Delete.
-
-
- * ppc-opc.c: (powerpc_opcodes) <hwsync>: New extended mnemonic.
-
-
- PR 18474
- * msp430-dis.c (msp430_nooperands): Fix check for emulated insns.
-
-
- * arm-dis.c (arm_opcodes): Add "setpan".
- (thumb_opcodes): Add "setpan".
-
-
- * arm-dis.c (select_arm_features): Rework to avoid used of redefined
- macros.
-
-
- * aarch64-tbl.h (aarch64_feature_rdma): New.
- (RDMA): New.
- (aarch64_opcode_table): Add "sqrmlah" and "sqrdmlsh" instructions.
- * aarch64-asm-2.c: Regenerate.
- * aarch64-dis-2.c: Regenerate.
- * aarch64-opc-2.c: Regenerate.
-
-
- * aarch64-tbl.h (aarch64_feature_lor): New.
- (LOR): New.
- (aarch64_opdocde_table): Add "ldlar", "ldlarb", "ldlarh", "stllr",
- "stllrb", "stllrh".
- * aarch64-asm-2.c: Regenerate.
- * aarch64-dis-2.c: Regenerate.
- * aarch64-opc-2.c: Regenerate.
-
-
- * aarch64-opc.c (F_ARCHEXT): New.
- (aarch64_sys_regs): Add "pan".
- (aarch64_sys_reg_supported_p): New.
- (aarch64_pstatefields): Add "pan".
- (aarch64_pstatefield_supported_p): New.
-
-
- * i386-tbl.h: Regenerate.
-
-
- * i386-dis.c (print_insn): Swap rounding mode specifier and
- general purpose register in Intel mode.
-
-
- * i386-opc.tbl: New IntelSyntax entries for vcvt{,u}si2s{d,s}.
- * i386-tbl.h: Regenerate.
-
-
- * i386-opc.tbl: Remove Disp32 from AMD64 direct call/jmp.
- * i386-init.h: Regenerated.
-
-
- PR binutis/18386
- * i386-dis.c: Add comments for '@'.
- (x86_64_table): Use '@' on call/jmp for X86_64_E8/X86_64_E9.
- (enum x86_64_isa): New.
- (isa64): Likewise.
- (print_i386_disassembler_options): Add amd64 and intel64.
- (print_insn): Handle amd64 and intel64.
- (putop): Handle '@'.
- (OP_J): Don't ignore the operand size prefix for AMD64 in 64-bit.
- * i386-gen.c (cpu_flags): Add CpuAMD64 and CpuIntel64.
- * i386-opc.h (AMD64): New.
- (CpuIntel64): Likewise.
- (i386_cpu_flags): Add cpuamd64 and cpuintel64.
- * i386-opc.tbl: Add direct call/jmp with Disp16|Disp32 for AMD64.
- Mark direct call/jmp without Disp16|Disp32 as Intel64.
- * i386-init.h: Regenerated.
- * i386-tbl.h: Likewise.
-
-
- * ppc-opc.c (IH) New define.
- (powerpc_opcodes) <wait>: Do not enable for POWER7.
- <tlbie>: Add RS operand for POWER7.
- <slbia>: Add IH operand for POWER6.
-
-
- * opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
- direct branch.
- (jmp): Likewise.
- * i386-tbl.h: Regenerated.
-
-
- * configure.ac: Support bfd_iamcu_arch.
- * disassemble.c (disassembler): Support bfd_iamcu_arch.
- * i386-gen.c (cpu_flag_init): Add CPU_IAMCU_FLAGS and
- CPU_IAMCU_COMPAT_FLAGS.
- (cpu_flags): Add CpuIAMCU.
- * i386-opc.h (CpuIAMCU): New.
- (i386_cpu_flags): Add cpuiamcu.
- * configure: Regenerated.
- * i386-init.h: Likewise.
- * i386-tbl.h: Likewise.
-
-
- PR binutis/18386
- * i386-dis.c (X86_64_E8): New.
- (X86_64_E9): Likewise.
- Update comments on 'T', 'U', 'V'. Add comments for '^'.
- (dis386): Replace callT/jmpT with X86_64_E8/X86_64_E9.
- (x86_64_table): Add X86_64_E8 and X86_64_E9.
- (mod_table): Replace {T|} with ^ on Jcall/Jmp.
- (putop): Handle '^'.
- (OP_J): Ignore the operand size prefix in 64-bit. Don't check
- REX_W.
-
-
- * disassemble.c (disassembler): Choose suitable disassembler based
- on E_ABI.
- * rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use
- it to decode mul/div insns.
- * rl78-decode.c: Regenerate.
- * rl78-dis.c (print_insn_rl78): Rename to...
- (print_insn_rl78_common): ...this, take ISA parameter.
- (print_insn_rl78): New.
- (print_insn_rl78_g10): New.
- (print_insn_rl78_g13): New.
- (print_insn_rl78_g14): New.
- (rl78_get_disassembler): New.
-
-
- * po/fr.po: Updated French translation.
-
-
- * ppc-opc.c (DCBT_EO): New define.
- (powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
- <lharx>: Likewise.
- <stbcx.>: Likewise.
- <sthcx.>: Likewise.
- <waitrsv>: Do not enable for POWER7 and later.
- <waitimpl>: Likewise.
- <dcbt>: Default to the two operand form of the instruction for all
- "old" cpus. For "new" cpus, use the operand ordering that matches
- whether the cpu is server or embedded.
- <dcbtst>: Likewise.
-
-
- * s390-opc.c: New instruction type VV0UU2.
- * s390-opc.txt: Fix instruction types for VFCE, VLDE, VFSQ, WFK,
- and WFC.
-
-
- * i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
- * i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
- vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
- (vfpclasspd, vfpclassps): Add %XZ.
-
-
- * i386-dis.c (PREFIX_UD_SHIFT): Removed.
- (PREFIX_UD_REPZ): Likewise.
- (PREFIX_UD_REPNZ): Likewise.
- (PREFIX_UD_DATA): Likewise.
- (PREFIX_UD_ADDR): Likewise.
- (PREFIX_UD_LOCK): Likewise.
-
-
- * i386-dis.c (prefix_requirement): Removed.
- (print_insn): Don't set prefix_requirement. Check
- dp->prefix_requirement instead of prefix_requirement.
-
-
- PR binutils/17898
- * i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
- (PREFIX_MOD_0_0FC7_REG_6): This.
- (PREFIX_MOD_3_0FC7_REG_6): New.
- (PREFIX_MOD_3_0FC7_REG_7): Likewise.
- (prefix_table): Replace PREFIX_0FC7_REG_6 with
- PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
- PREFIX_MOD_3_0FC7_REG_7.
- (mod_table): Replace PREFIX_0FC7_REG_6 with
- PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
- PREFIX_MOD_3_0FC7_REG_7.
-
-
- * i386-dis.c (PREFIX_MANDATORY_REPZ): Removed.
- (PREFIX_MANDATORY_REPNZ): Likewise.
- (PREFIX_MANDATORY_DATA): Likewise.
- (PREFIX_MANDATORY_ADDR): Likewise.
- (PREFIX_MANDATORY_LOCK): Likewise.
- (PREFIX_MANDATORY): Likewise.
- (PREFIX_UD_SHIFT): Set to 8
- (PREFIX_UD_REPZ): Updated.
- (PREFIX_UD_REPNZ): Likewise.
- (PREFIX_UD_DATA): Likewise.
- (PREFIX_UD_ADDR): Likewise.
- (PREFIX_UD_LOCK): Likewise.
- (PREFIX_IGNORED_SHIFT): New.
- (PREFIX_IGNORED_REPZ): Likewise.
- (PREFIX_IGNORED_REPNZ): Likewise.
- (PREFIX_IGNORED_DATA): Likewise.
- (PREFIX_IGNORED_ADDR): Likewise.
- (PREFIX_IGNORED_LOCK): Likewise.
- (PREFIX_OPCODE): Likewise.
- (PREFIX_IGNORED): Likewise.
- (Bad_Opcode): Replace PREFIX_MANDATORY with 0.
- (dis386_twobyte): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
- (three_byte_table): Likewise.
- (mod_table): Likewise.
- (mandatory_prefix): Renamed to ...
- (prefix_requirement): This.
- (prefix_table): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
- Update PREFIX_90 entry.
- (get_valid_dis386): Check prefix_requirement to see if a prefix
- should be ignored.
- (print_insn): Replace mandatory_prefix with prefix_requirement.
-
-
- * arm-dis.c (thumb32_opcodes): Define 'D' format control code,
- use it for ssat and ssat16.
- (print_insn_thumb32): Add handle case for 'D' control code.
-
-
- * i386-dis-evex.h (evex_table): Fill prefix_requirement field.
- * i386-dis.c (PREFIX_MANDATORY_REPZ, PREFIX_MANDATORY_REPNZ,
- PREFIX_MANDATORY_DATA, PREFIX_MANDATORY_ADDR, PREFIX_MANDATORY_LOCK,
- PREFIX_UD_SHIFT, PREFIX_UD_REPZ, REFIX_UD_REPNZ, PREFIX_UD_DATA,
- PREFIX_UD_ADDR, PREFIX_UD_LOCK, PREFIX_MANDATORY): Define.
- (Bad_Opcode, FLOAT, DIS386, DIS386_PREFIX, THREE_BYTE_TABLE_PREFIX):
- Fill prefix_requirement field.
- (struct dis386): Add prefix_requirement field.
- (dis386): Fill prefix_requirement field.
- (dis386_twobyte): Ditto.
- (twobyte_has_mandatory_prefix_: Remove.
- (reg_table): Fill prefix_requirement field.
- (prefix_table): Ditto.
- (x86_64_table): Ditto.
- (three_byte_table): Ditto.
- (xop_table): Ditto.
- (vex_table): Ditto.
- (vex_len_table): Ditto.
- (vex_w_table): Ditto.
- (mod_table): Ditto.
- (bad_opcode): Ditto.
- (print_insn): Use prefix_requirement.
- (FGRPd9_2, FGRPd9_4, FGRPd9_5, FGRPd9_6, FGRPd9_7, FGRPda_5, FGRPdb_4,
- FGRPde_3, FGRPdf_4): Fill prefix_requirement field.
- (float_reg): Ditto.
-
-
- * d10v-opc.c (d10v_reg_name_cnt): Convert old style prototype.
-
-
- * Makefile.in: Regenerated.
-
-
- * ppc-dis.c (disassemble_init_powerpc): Only initialise
- powerpc_opcd_indices and vle_opcd_indices once.
-
-
- * ppc-opc.c (powerpc_opcodes): Add slbfee.
-
-
- * arm-dis.c (opcode32): Updated to use new arm feature struct.
- (opcode16): Likewise.
- (coprocessor_opcodes): Replace bit with feature struct.
- (neon_opcodes): Likewise.
- (arm_opcodes): Likewise.
- (thumb_opcodes): Likewise.
- (thumb32_opcodes): Likewise.
- (print_insn_coprocessor): Likewise.
- (print_insn_arm): Likewise.
- (select_arm_features): Follow new feature struct.
-
-
- * i386-dis.c (rm_table): Add clzero.
- * i386-gen.c (cpu_flag_init): Add new CPU_ZNVER1_FLAGS.
- Add CPU_CLZERO_FLAGS.
- (cpu_flags): Add CpuCLZERO.
- * i386-opc.h: Add CpuCLZERO.
- * i386-opc.tbl: Add clzero.
- * i386-init.h: Re-generated.
- * i386-tbl.h: Re-generated.
-
-
- * mips-opc.c (decode_mips_operand): Fix constraint issues
- with u and y operands.
-
-
- * mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions.
-
-
- * s390-opc.c: Add new IBM z13 instructions.
- * s390-opc.txt: Likewise.
-
-
- * aarch64-tbl.h (aarch64_opcode_table): Remove strub, ldurb, ldursb,
- stur, ldur, sturh, ldurh, ldursh, ldursw, prfum F_HAS_ALIAS flag and
- related alias.
- * aarch64-asm-2.c: Regenerate.
- * aarch64-dis-2.c: Likewise.
- * aarch64-opc-2.c: Likewise.
+ * aarch64-opc.c (operand_general_constraint_met_p): Check validity
+ of MSR UAO immediate operand.
-2015-03-03 Jiong Wang <jiong.wang@arm.com>
+2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
- * arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
+ * mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
+ instruction support.
- * sh-opc.h (clrs, sets): Mark as arch_sh3_nommu_up instead of
- arch_sh_up.
- (pref): Mark as arch_sh2a_nofpu_or_sh3_nommu_up instead of
- arch_sh2a_nofpu_or_sh4_nommu_nofpu_up.
+ * configure: Regenerate.
-2015-02-23 Vinay <Vinay.G@kpit.com>
+2016-01-14 Nick Clifton <nickc@redhat.com>
- * rl78-decode.opc (MOV): Added space between two operands for
- 'mov' instruction in index addressing mode.
+ * rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
+ instructions that can support stack pointer operations.
* rl78-decode.c: Regenerate.
+ * rl78-dis.c: Fix display of stack pointer in MOVW based
+ instructions.
-
- * microblaze-dis.h [__cplusplus]: Wrap in extern "C".
-
- * microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
- microblaze_and, microblaze_xor.
- * microblaze-opc.h (opcodes): Adjust.
+ * aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
+ testing for RAS support. Add checks for erxfr_el1, erxctlr_el1,
+ erxtatus_el1 and erxaddr_el1.
-2015-01-28 James Bowman <james.bowman@ftdichip.com>
+2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
- * Makefile.am: Add FT32 files.
- * configure.ac: Handle FT32.
- * disassemble.c (disassembler): Call print_insn_ft32.
- * ft32-dis.c: New file.
- * ft32-opc.c: New file.
- * Makefile.in: Regenerate.
- * configure: Regenerate.
- * po/POTFILES.in: Regenerate.
+ * arm-dis.c (arm_opcodes): Add "esb".
+ (thumb_opcodes): Likewise.
-2015-01-28 Kuan-Lin Chen <kuanlinchentw@gmail.com>
- * nds32-asm.c (keyword_sr): Add new system registers.
+ * ppc-opc.c <xscmpnedp>: Delete.
+ <xvcmpnedp>: Likewise.
+ <xvcmpnedp.>: Likewise.
+ <xvcmpnesp>: Likewise.
+ <xvcmpnesp.>: Likewise.
- * s390-dis.c (s390_extract_operand): Support vector register
- operands.
- (s390_print_insn_with_opcode): Support new operands types and add
- new handling of optional operands.
- * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
- and include opcode/s390.h instead.
- (struct op_struct): New field `flags'.
- (insertOpcode, insertExpandedMnemonic): New parameter `flags'.
- (dumpTable): Dump flags.
- (main): Parse flags from the s390-opc.txt file. Add z13 as cpu
- string.
- * s390-opc.c: Add new operands types, instruction formats, and
- instruction masks.
- (s390_opformats): Add new formats for .insn.
- * s390-opc.txt: Add new instructions.
+ PR gas/13050
+ * m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
+ addition to ISA_A.
Update year range in copyright notice of all files.
-For older changes see ChangeLog-2014
+For older changes see ChangeLog-2015
\f
-Copyright (C) 2015 Free Software Foundation, Inc.
+Copyright (C) 2016 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
projects / binutils.git / blobdiff