Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
- 2008, 2009, 2010 Free Software Foundation, Inc.
+ 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
#include "language.h"
#include "solib.h"
#include "main.h"
+#include "dictionary.h"
+#include "block.h"
#include "gdb_assert.h"
#include "mi/mi-common.h"
#include "event-top.h"
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
-/* In asynchronous mode, but simulating synchronous execution. */
+/* In asynchronous mode, but simulating synchronous execution. */
int sync_execution = 0;
(flags)[signum] = 0; \
} while (0)
-/* Value to pass to target_resume() to cause all threads to resume */
+/* Value to pass to target_resume() to cause all threads to resume. */
#define RESUME_ALL minus_one_ptid
show_follow_fork_mode_string (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Debugger response to a program call of fork or vfork is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("Debugger response to a program "
+ "call of fork or vfork is \"%s\".\n"),
value);
}
\f
parent thread structure's run control related fields, not just these.
Initialized to avoid "may be used uninitialized" warnings from gcc. */
struct breakpoint *step_resume_breakpoint = NULL;
+ struct breakpoint *exception_resume_breakpoint = NULL;
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
preserve the stepping state in the fork child. */
if (follow_child && should_resume)
{
- step_resume_breakpoint
- = clone_momentary_breakpoint (tp->step_resume_breakpoint);
- step_range_start = tp->step_range_start;
- step_range_end = tp->step_range_end;
- step_frame_id = tp->step_frame_id;
+ step_resume_breakpoint = clone_momentary_breakpoint
+ (tp->control.step_resume_breakpoint);
+ step_range_start = tp->control.step_range_start;
+ step_range_end = tp->control.step_range_end;
+ step_frame_id = tp->control.step_frame_id;
+ exception_resume_breakpoint
+ = clone_momentary_breakpoint (tp->control.exception_resume_breakpoint);
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
this when the breakpoints module becomes aware of
inferiors and address spaces. */
delete_step_resume_breakpoint (tp);
- tp->step_range_start = 0;
- tp->step_range_end = 0;
- tp->step_frame_id = null_frame_id;
+ tp->control.step_range_start = 0;
+ tp->control.step_range_end = 0;
+ tp->control.step_frame_id = null_frame_id;
+ delete_exception_resume_breakpoint (tp);
}
parent = inferior_ptid;
over from WAIT_PID" logic above. */
nullify_last_target_wait_ptid ();
- /* If we followed the child, switch to it... */
+ /* If we followed the child, switch to it... */
if (follow_child)
{
switch_to_thread (child);
if (should_resume)
{
tp = inferior_thread ();
- tp->step_resume_breakpoint = step_resume_breakpoint;
- tp->step_range_start = step_range_start;
- tp->step_range_end = step_range_end;
- tp->step_frame_id = step_frame_id;
+ tp->control.step_resume_breakpoint
+ = step_resume_breakpoint;
+ tp->control.step_range_start = step_range_start;
+ tp->control.step_range_end = step_range_end;
+ tp->control.step_frame_id = step_frame_id;
+ tp->control.exception_resume_breakpoint
+ = exception_resume_breakpoint;
}
else
{
forked. In that case, the resume command
issued is most likely not applicable to the
child, so just warn, and refuse to resume. */
- warning (_("\
-Not resuming: switched threads before following fork child.\n"));
+ warning (_("Not resuming: switched threads "
+ "before following fork child.\n"));
}
/* Reset breakpoints in the child as appropriate. */
"threads". We must update the bp's notion of which thread
it is for, or it'll be ignored when it triggers. */
- if (tp->step_resume_breakpoint)
- breakpoint_re_set_thread (tp->step_resume_breakpoint);
+ if (tp->control.step_resume_breakpoint)
+ breakpoint_re_set_thread (tp->control.step_resume_breakpoint);
+
+ if (tp->control.exception_resume_breakpoint)
+ breakpoint_re_set_thread (tp->control.exception_resume_breakpoint);
/* Reinsert all breakpoints in the child. The user may have set
breakpoints after catching the fork, in which case those
&& is_running (thread->ptid)
&& !is_executing (thread->ptid)
&& !thread->stop_requested
- && thread->stop_signal == TARGET_SIGNAL_0)
+ && thread->suspend.stop_signal == TARGET_SIGNAL_0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
struct program_space *pspace;
struct address_space *aspace;
- /* follow-fork child, detach-on-fork on */
+ /* follow-fork child, detach-on-fork on. */
old_chain = make_cleanup_restore_current_thread ();
if (exec)
fprintf_filtered (gdb_stdlog,
- "Detaching vfork parent process %d after child exec.\n",
+ "Detaching vfork parent process "
+ "%d after child exec.\n",
inf->vfork_parent->pid);
else
fprintf_filtered (gdb_stdlog,
- "Detaching vfork parent process %d after child exit.\n",
+ "Detaching vfork parent process "
+ "%d after child exit.\n",
inf->vfork_parent->pid);
}
inf->aspace = pspace->aspace;
/* Put back inferior_ptid. We'll continue mourning this
- inferior. */
+ inferior. */
do_cleanups (old_chain);
resume_parent = inf->vfork_parent->pid;
struct cleanup *old_chain = make_cleanup_restore_current_thread ();
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: resuming vfork parent process %d\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: resuming vfork parent process %d\n",
resume_parent);
iterate_over_threads (proceed_after_vfork_done, &resume_parent);
fprintf_filtered (file, _("Follow exec mode is \"%s\".\n"), value);
}
-/* EXECD_PATHNAME is assumed to be non-NULL. */
+/* EXECD_PATHNAME is assumed to be non-NULL. */
static void
follow_exec (ptid_t pid, char *execd_pathname)
And, we DON'T want to call delete_breakpoints() here, since
that may write the bp's "shadow contents" (the instruction
value that was overwritten witha TRAP instruction). Since
- we now have a new a.out, those shadow contents aren't valid. */
+ we now have a new a.out, those shadow contents aren't valid. */
mark_breakpoints_out ();
update_breakpoints_after_exec ();
/* If there was one, it's gone now. We cannot truly step-to-next
- statement through an exec(). */
- th->step_resume_breakpoint = NULL;
- th->step_range_start = 0;
- th->step_range_end = 0;
+ statement through an exec(). */
+ th->control.step_resume_breakpoint = NULL;
+ th->control.exception_resume_breakpoint = NULL;
+ th->control.step_range_start = 0;
+ th->control.step_range_end = 0;
/* The target reports the exec event to the main thread, even if
some other thread does the exec, and even if the main thread was
with scheduler-locking on in all-stop mode. */
th->stop_requested = 0;
- /* What is this a.out's name? */
+ /* What is this a.out's name? */
printf_unfiltered (_("%s is executing new program: %s\n"),
target_pid_to_str (inferior_ptid),
execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
- inferior has essentially been killed & reborn. */
+ inferior has essentially been killed & reborn. */
gdb_flush (gdb_stdout);
gdb_assert (current_program_space == inf->pspace);
- /* That a.out is now the one to use. */
+ /* That a.out is now the one to use. */
exec_file_attach (execd_pathname, 0);
/* SYMFILE_DEFER_BP_RESET is used as the proper displacement for PIE
/* Reinsert all breakpoints. (Those which were symbolic have
been reset to the proper address in the new a.out, thanks
- to symbol_file_command...) */
+ to symbol_file_command...). */
insert_breakpoints ();
/* The next resume of this inferior should bring it to the shlib
startup breakpoints. (If the user had also set bp's on
"main" from the old (parent) process, then they'll auto-
- matically get reset there in the new process.) */
+ matically get reset there in the new process.). */
}
/* Non-zero if we just simulating a single-step. This is needed
is finished, we need to switch to deferred_step_ptid, and step it.
The use case is when one thread has hit a breakpoint, and then the user
- has switched to another thread and issued 'step'. We need to step over
+ has switched to another thread and issued 'step'. We need to step over
breakpoint in the thread which hit the breakpoint, but then continue
stepping the thread user has selected. */
static ptid_t deferred_step_ptid;
return state;
}
+/* If inferior is in displaced stepping, and ADDR equals to starting address
+ of copy area, return corresponding displaced_step_closure. Otherwise,
+ return NULL. */
+
+struct displaced_step_closure*
+get_displaced_step_closure_by_addr (CORE_ADDR addr)
+{
+ struct displaced_step_inferior_state *displaced
+ = get_displaced_stepping_state (ptid_get_pid (inferior_ptid));
+
+ /* If checking the mode of displaced instruction in copy area. */
+ if (displaced && !ptid_equal (displaced->step_ptid, null_ptid)
+ && (displaced->step_copy == addr))
+ return displaced->step_closure;
+
+ return NULL;
+}
+
/* Remove the displaced stepping state of process PID. */
static void
const char *value)
{
if (can_use_displaced_stepping == can_use_displaced_stepping_auto)
- fprintf_filtered (file, _("\
-Debugger's willingness to use displaced stepping to step over \
-breakpoints is %s (currently %s).\n"),
+ fprintf_filtered (file,
+ _("Debugger's willingness to use displaced stepping "
+ "to step over breakpoints is %s (currently %s).\n"),
value, non_stop ? "on" : "off");
else
- fprintf_filtered (file, _("\
-Debugger's willingness to use displaced stepping to step over \
-breakpoints is %s.\n"), value);
+ fprintf_filtered (file,
+ _("Debugger's willingness to use displaced stepping "
+ "to step over breakpoints is %s.\n"), value);
}
/* Return non-zero if displaced stepping can/should be used to step
}
static void
-write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
+write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr,
+ const gdb_byte *myaddr, int len)
{
struct cleanup *ptid_cleanup = save_inferior_ptid ();
/* The breakpoint we were sitting under has since been
removed. */
- tp->trap_expected = 0;
+ tp->control.trap_expected = 0;
/* Go back to what we were trying to do. */
step = currently_stepping (tp);
if (debug_displaced)
- fprintf_unfiltered (gdb_stdlog, "breakpoint is gone %s: step(%d)\n",
+ fprintf_unfiltered (gdb_stdlog,
+ "breakpoint is gone %s: step(%d)\n",
target_pid_to_str (tp->ptid), step);
target_resume (ptid, step, TARGET_SIGNAL_0);
- tp->stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
/* This request was discarded. See if there's any other
thread waiting for its turn. */
show_scheduler_mode (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Mode for locking scheduler during execution is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("Mode for locking scheduler "
+ "during execution is \"%s\".\n"),
value);
}
{
hw_step = 0;
/* Do not pull these breakpoints until after a `wait' in
- `wait_for_inferior' */
+ `wait_for_inferior'. */
singlestep_breakpoints_inserted_p = 1;
singlestep_ptid = inferior_ptid;
singlestep_pc = pc;
fprintf_unfiltered (gdb_stdlog,
"infrun: resume (step=%d, signal=%d), "
"trap_expected=%d\n",
- step, sig, tp->trap_expected);
+ step, sig, tp->control.trap_expected);
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
event, displaced stepping breaks the vfork child similarly as single
step software breakpoint. */
if (use_displaced_stepping (gdbarch)
- && (tp->trap_expected
+ && (tp->control.trap_expected
|| (step && gdbarch_software_single_step_p (gdbarch)))
&& sig == TARGET_SIGNAL_0
&& !current_inferior ()->waiting_for_vfork_done)
resume_ptid = inferior_ptid;
}
else if ((step || singlestep_breakpoints_inserted_p)
- && tp->trap_expected)
+ && tp->control.trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
|| (scheduler_mode == schedlock_step
&& (step || singlestep_breakpoints_inserted_p)))
{
- /* User-settable 'scheduler' mode requires solo thread resume. */
+ /* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
}
if (debug_displaced
&& use_displaced_stepping (gdbarch)
- && tp->trap_expected)
+ && tp->control.trap_expected)
{
struct regcache *resume_regcache = get_thread_regcache (resume_ptid);
struct gdbarch *resume_gdbarch = get_regcache_arch (resume_regcache);
/* Avoid confusing the next resume, if the next stop/resume
happens to apply to another thread. */
- tp->stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
target_resume (resume_ptid, step, sig);
}
"infrun: clear_proceed_status_thread (%s)\n",
target_pid_to_str (tp->ptid));
- tp->trap_expected = 0;
- tp->step_range_start = 0;
- tp->step_range_end = 0;
- tp->step_frame_id = null_frame_id;
- tp->step_stack_frame_id = null_frame_id;
- tp->step_over_calls = STEP_OVER_UNDEBUGGABLE;
+ tp->control.trap_expected = 0;
+ tp->control.step_range_start = 0;
+ tp->control.step_range_end = 0;
+ tp->control.step_frame_id = null_frame_id;
+ tp->control.step_stack_frame_id = null_frame_id;
+ tp->control.step_over_calls = STEP_OVER_UNDEBUGGABLE;
tp->stop_requested = 0;
- tp->stop_step = 0;
+ tp->control.stop_step = 0;
- tp->proceed_to_finish = 0;
+ tp->control.proceed_to_finish = 0;
/* Discard any remaining commands or status from previous stop. */
- bpstat_clear (&tp->stop_bpstat);
+ bpstat_clear (&tp->control.stop_bpstat);
}
static int
}
inferior = current_inferior ();
- inferior->stop_soon = NO_STOP_QUIETLY;
+ inferior->control.stop_soon = NO_STOP_QUIETLY;
}
stop_after_trap = 0;
event. If a step-over is required return TRUE and set the current thread
to the old thread. Otherwise return FALSE.
- This should be suitable for any targets that support threads. */
+ This should be suitable for any targets that support threads. */
static int
prepare_to_proceed (int step)
/* We return 1 to indicate that there is a breakpoint here,
so we need to step over it before continuing to avoid
- hitting it straight away. */
+ hitting it straight away. */
return 1;
}
}
"infrun: proceed (addr=%s, signal=%d, step=%d)\n",
paddress (gdbarch, addr), siggnal, step);
- /* We're handling a live event, so make sure we're doing live
- debugging. If we're looking at traceframes while the target is
- running, we're going to need to get back to that mode after
- handling the event. */
- if (non_stop)
- {
- make_cleanup_restore_current_traceframe ();
- set_traceframe_number (-1);
- }
-
if (non_stop)
/* In non-stop, each thread is handled individually. The context
must already be set to the right thread here. */
prepare_to_proceed checks the current thread against the
thread that reported the most recent event. If a step-over
is required it returns TRUE and sets the current thread to
- the old thread. */
+ the old thread. */
if (prepare_to_proceed (step))
oneproc = 1;
}
if (oneproc)
{
- tp->trap_expected = 1;
+ tp->control.trap_expected = 1;
/* If displaced stepping is enabled, we can step over the
breakpoint without hitting it, so leave all breakpoints
inserted. Otherwise we need to disable all breakpoints, step
/* We can insert breakpoints if we're not trying to step over one,
or if we are stepping over one but we're using displaced stepping
to do so. */
- if (! tp->trap_expected || use_displaced_stepping (gdbarch))
+ if (! tp->control.trap_expected || use_displaced_stepping (gdbarch))
insert_breakpoints ();
if (!non_stop)
last_thread = find_thread_ptid (last_ptid);
if (last_thread)
{
- tp->stop_signal = last_thread->stop_signal;
- last_thread->stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = last_thread->suspend.stop_signal;
+ last_thread->suspend.stop_signal = TARGET_SIGNAL_0;
}
}
}
if (siggnal != TARGET_SIGNAL_DEFAULT)
- tp->stop_signal = siggnal;
+ tp->suspend.stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
- else if (!signal_program[tp->stop_signal])
- tp->stop_signal = TARGET_SIGNAL_0;
+ else if (!signal_program[tp->suspend.stop_signal])
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
annotate_starting ();
init_infwait_state ();
/* Resume inferior. */
- resume (oneproc || step || bpstat_should_step (), tp->stop_signal);
+ resume (oneproc || step || bpstat_should_step (), tp->suspend.stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
/* Do this only if we are not using the event loop, or if the target
- does not support asynchronous execution. */
+ does not support asynchronous execution. */
if (!target_can_async_p ())
{
wait_for_inferior (0);
init_wait_for_inferior ();
inferior = current_inferior ();
- inferior->stop_soon = STOP_QUIETLY_REMOTE;
+ inferior->control.stop_soon = STOP_QUIETLY_REMOTE;
- /* Always go on waiting for the target, regardless of the mode. */
+ /* Always go on waiting for the target, regardless of the mode. */
/* FIXME: cagney/1999-09-23: At present it isn't possible to
indicate to wait_for_inferior that a target should timeout if
nothing is returned (instead of just blocking). Because of this,
targets expecting an immediate response need to, internally, set
things up so that the target_wait() is forced to eventually
- timeout. */
+ timeout. */
/* FIXME: cagney/1999-09-24: It isn't possible for target_open() to
differentiate to its caller what the state of the target is after
the initial open has been performed. Here we're assuming that
the target has stopped. It should be possible to eventually have
target_open() return to the caller an indication that the target
is currently running and GDB state should be set to the same as
- for an async run. */
+ for an async run. */
wait_for_inferior (0);
/* Now that the inferior has stopped, do any bookkeeping like
struct execution_control_state *ecs);
static void handle_step_into_function_backward (struct gdbarch *gdbarch,
struct execution_control_state *ecs);
-static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
+static void insert_step_resume_breakpoint_at_frame (struct frame_info *);
static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
-static void insert_step_resume_breakpoint_at_sal (struct gdbarch *gdbarch,
- struct symtab_and_line sr_sal,
- struct frame_id sr_id);
+static void insert_step_resume_breakpoint_at_sal (struct gdbarch *,
+ struct symtab_and_line ,
+ struct frame_id);
static void insert_longjmp_resume_breakpoint (struct gdbarch *, CORE_ADDR);
+static void check_exception_resume (struct execution_control_state *,
+ struct frame_info *, struct symbol *);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
return 0;
delete_step_resume_breakpoint (info);
+ delete_exception_resume_breakpoint (info);
return 0;
}
struct thread_info *tp = inferior_thread ();
delete_step_resume_breakpoint (tp);
+ delete_exception_resume_breakpoint (tp);
}
else
/* In all-stop mode, delete all step-resume and longjmp-resume
iterate_over_threads (delete_step_resume_breakpoint_callback, NULL);
}
-/* A cleanup wrapper. */
+/* A cleanup wrapper. */
static void
delete_step_thread_step_resume_breakpoint_cleanup (void *arg)
target_wait because they can be loaded from the target while
in target_wait. This makes remote debugging a bit more
efficient for those targets that provide critical registers
- as part of their normal status mechanism. */
+ as part of their normal status mechanism. */
registers_changed ();
/* If an error happens while handling the event, propagate GDB's
knowledge of the executing state to the frontend/user running
state. */
- old_chain_2 = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
+ old_chain_2 = make_cleanup (finish_thread_state_cleanup,
+ &minus_one_ptid);
/* In non-stop mode, each thread is handled individually.
Switch early, so the global state is set correctly for this
because they can be loaded from the target while in target_wait.
This makes remote debugging a bit more efficient for those
targets that provide critical registers as part of their normal
- status mechanism. */
+ status mechanism. */
overlay_cache_invalid = 1;
registers_changed ();
do_cleanups (old_cleanups);
}
-/* Asynchronous version of wait_for_inferior. It is called by the
+/* Asynchronous version of wait_for_inferior. It is called by the
event loop whenever a change of state is detected on the file
- descriptor corresponding to the target. It can be called more than
- once to complete a single execution command. In such cases we need
- to keep the state in a global variable ECSS. If it is the last time
+ descriptor corresponding to the target. It can be called more than
+ once to complete a single execution command. In such cases we need
+ to keep the state in a global variable ECSS. If it is the last time
that this function is called for a single execution command, then
report to the user that the inferior has stopped, and do the
- necessary cleanups. */
+ necessary cleanups. */
void
fetch_inferior_event (void *client_data)
/* We'll update this if & when we switch to a new thread. */
previous_inferior_ptid = inferior_ptid;
+ /* We're handling a live event, so make sure we're doing live
+ debugging. If we're looking at traceframes while the target is
+ running, we're going to need to get back to that mode after
+ handling the event. */
+ if (non_stop)
+ {
+ make_cleanup_restore_current_traceframe ();
+ set_current_traceframe (-1);
+ }
+
if (non_stop)
/* In non-stop mode, the user/frontend should not notice a thread
switch due to internal events. Make sure we reverse to the
because they can be loaded from the target while in target_wait.
This makes remote debugging a bit more efficient for those
targets that provide critical registers as part of their normal
- status mechanism. */
+ status mechanism. */
overlay_cache_invalid = 1;
registers_changed ();
delete_step_thread_step_resume_breakpoint ();
/* We may not find an inferior if this was a process exit. */
- if (inf == NULL || inf->stop_soon == NO_STOP_QUIETLY)
+ if (inf == NULL || inf->control.stop_soon == NO_STOP_QUIETLY)
normal_stop ();
if (target_has_execution
&& ecs->ws.kind != TARGET_WAITKIND_EXITED
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
&& ecs->event_thread->step_multi
- && ecs->event_thread->stop_step)
+ && ecs->event_thread->control.stop_step)
inferior_event_handler (INF_EXEC_CONTINUE, NULL);
else
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
{
struct thread_info *tp = inferior_thread ();
- tp->step_frame_id = get_frame_id (frame);
- tp->step_stack_frame_id = get_stack_frame_id (frame);
+ tp->control.step_frame_id = get_frame_id (frame);
+ tp->control.step_stack_frame_id = get_stack_frame_id (frame);
tp->current_symtab = sal.symtab;
tp->current_line = sal.line;
void
error_is_running (void)
{
- error (_("\
-Cannot execute this command while the selected thread is running."));
+ error (_("Cannot execute this command while "
+ "the selected thread is running."));
}
void
fprintf_unfiltered (gdb_stdlog, "infrun: syscall number = '%d'\n",
syscall_number);
- ecs->event_thread->stop_bpstat
+ ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (regcache),
stop_pc, ecs->ptid);
- ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
+ ecs->random_signal
+ = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
if (!ecs->random_signal)
{
/* Catchpoint hit. */
- ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
return 0;
}
}
/* If no catchpoint triggered for this, then keep going. */
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
keep_going (ecs);
return 1;
}
struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid));
gdb_assert (inf);
- stop_soon = inf->stop_soon;
+ stop_soon = inf->control.stop_soon;
}
else
stop_soon = NO_STOP_QUIETLY;
- /* Cache the last pid/waitstatus. */
+ /* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
target_last_waitstatus = ecs->ws;
/* Always clear state belonging to the previous time we stopped. */
stop_stack_dummy = STOP_NONE;
- /* If it's a new process, add it to the thread database */
+ /* If it's a new process, add it to the thread database. */
ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
&& !ptid_equal (ecs->ptid, minus_one_ptid)
set_current_inferior (find_inferior_pid (ptid_get_pid (ecs->ptid)));
set_current_program_space (current_inferior ()->pspace);
handle_vfork_child_exec_or_exit (0);
- target_terminal_ours (); /* Must do this before mourn anyway */
+ target_terminal_ours (); /* Must do this before mourn anyway. */
print_exited_reason (ecs->ws.value.integer);
/* Record the exit code in the convenience variable $_exitcode, so
set_current_program_space (current_inferior ()->pspace);
handle_vfork_child_exec_or_exit (0);
stop_print_frame = 0;
- target_terminal_ours (); /* Must do this before mourn anyway */
+ target_terminal_ours (); /* Must do this before mourn anyway. */
/* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
reach here unless the inferior is dead. However, for years
target_kill() was called here, which hints that fatal signals aren't
really fatal on some systems. If that's true, then some changes
- may be needed. */
+ may be needed. */
target_mourn_inferior ();
print_signal_exited_reason (ecs->ws.value.sig);
return;
/* The following are the only cases in which we keep going;
- the above cases end in a continue or goto. */
+ the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
if (singlestep_breakpoints_inserted_p)
{
- /* Pull the single step breakpoints out of the target. */
+ /* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
- ecs->event_thread->stop_bpstat
+ ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid);
causes a stop, not just if it may explain the signal.
Software watchpoints, for example, always appear in the
bpstat. */
- ecs->random_signal = !bpstat_causes_stop (ecs->event_thread->stop_bpstat);
+ ecs->random_signal
+ = !bpstat_causes_stop (ecs->event_thread->control.stop_bpstat);
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
ptid_t parent;
ptid_t child;
int should_resume;
- int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
+ int follow_child
+ = (follow_fork_mode_string == follow_fork_mode_child);
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
should_resume = follow_fork ();
stop_stepping (ecs);
return;
}
- ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
case TARGET_WAITKIND_VFORK_DONE:
the parent, and keep going. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_VFORK_DONE\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_VFORK_DONE\n");
if (!ptid_equal (ecs->ptid, inferior_ptid))
context_switch (ecs->ptid);
stop. */
follow_exec (inferior_ptid, ecs->ws.value.execd_pathname);
- ecs->event_thread->stop_bpstat
+ ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid);
- ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
+ ecs->random_signal
+ = !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat);
/* Note that this may be referenced from inside
bpstat_stop_status above, through inferior_has_execd. */
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
keep_going (ecs);
return;
}
- ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
/* Be careful not to try to gather much state about a thread
that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
- /* Getting the current syscall number */
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
+ /* Getting the current syscall number. */
if (handle_syscall_event (ecs) != 0)
return;
goto process_event_stop_test;
into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
if (handle_syscall_event (ecs) != 0)
return;
goto process_event_stop_test;
case TARGET_WAITKIND_STOPPED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
- ecs->event_thread->stop_signal = ecs->ws.value.sig;
+ ecs->event_thread->suspend.stop_signal = ecs->ws.value.sig;
break;
case TARGET_WAITKIND_NO_HISTORY:
if (non_stop)
/* Non-stop assumes that the target handles adding new threads
to the thread list. */
- internal_error (__FILE__, __LINE__, "\
-targets should add new threads to the thread list themselves in non-stop mode.");
+ internal_error (__FILE__, __LINE__,
+ "targets should add new threads to the thread "
+ "list themselves in non-stop mode.");
/* We may want to consider not doing a resume here in order to
give the user a chance to play with the new thread. It might
/* Do we need to clean up the state of a thread that has
completed a displaced single-step? (Doing so usually affects
the PC, so do it here, before we set stop_pc.) */
- displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal);
+ displaced_step_fixup (ecs->ptid,
+ ecs->event_thread->suspend.stop_signal);
/* If we either finished a single-step or hit a breakpoint, but
the user wanted this thread to be stopped, pretend we got a
SIG0 (generic unsignaled stop). */
if (ecs->event_thread->stop_requested
- && ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
/* We've either finished single-stepping past the single-step
breakpoint, or stopped for some other reason. It would be nice if
we could tell, but we can't reliably. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepping_past_"
+ "singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
- ecs->event_thread->trap_expected = 0;
+ ecs->event_thread->control.trap_expected = 0;
context_switch (saved_singlestep_ptid);
if (deprecated_context_hook)
/* If we stopped for some other reason than single-stepping, ignore
the fact that we were supposed to switch back. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
another thread. If so, then step that thread past the breakpoint,
and continue it. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
struct address_space *aspace =
get_regcache_aspace (get_thread_regcache (ecs->ptid));
/* Check if a regular breakpoint has been hit before checking
- for a potential single step breakpoint. Otherwise, GDB will
+ for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
if (regular_breakpoint_inserted_here_p (aspace, stop_pc))
{
singlestep_ptid. Don't swap here, since that's
the context we want to use. Just fudge our
state and continue. */
- stop_signal = ecs->event_thread->stop_signal;
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ stop_signal = ecs->event_thread->suspend.stop_signal;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
ecs->ptid = singlestep_ptid;
ecs->event_thread = find_thread_ptid (ecs->ptid);
- ecs->event_thread->stop_signal = stop_signal;
+ ecs->event_thread->suspend.stop_signal = stop_signal;
stop_pc = new_singlestep_pc;
}
else
context_switch (ecs->ptid);
/* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
+ Just continue. */
if (singlestep_breakpoints_inserted_p)
{
- /* Pull the single step breakpoints out of the target. */
+ /* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
the bp's: On HP-UX's that use ttrace, we can't
change the address space of a vforking child
process until the child exits (well, okay, not
- then either :-) or execs. */
+ then either :-) or execs. */
if (remove_status != 0)
error (_("Cannot step over breakpoint hit in wrong thread"));
else
if (singlestep_breakpoints_inserted_p)
{
- /* Pull the single step breakpoints out of the target. */
+ /* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
ecs->stop_func_start
+= gdbarch_deprecated_function_start_offset (gdbarch);
ecs->event_thread->stepping_over_breakpoint = 0;
- bpstat_clear (&ecs->event_thread->stop_bpstat);
- ecs->event_thread->stop_step = 0;
+ bpstat_clear (&ecs->event_thread->control.stop_bpstat);
+ ecs->event_thread->control.stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
/* Hide inlined functions starting here, unless we just performed stepi or
nexti. After stepi and nexti, always show the innermost frame (not any
inline function call sites). */
- if (ecs->event_thread->step_range_end != 1)
+ if (ecs->event_thread->control.step_range_end != 1)
skip_inline_frames (ecs->ptid);
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
- && ecs->event_thread->trap_expected
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ && ecs->event_thread->control.trap_expected
&& gdbarch_single_step_through_delay_p (gdbarch)
&& currently_stepping (ecs->event_thread))
{
/* We're trying to step off a breakpoint. Turns out that we're
also on an instruction that needs to be stepped multiple
- times before it's been fully executing. E.g., architectures
+ times before it's been fully executing. E.g., architectures
with a delay slot. It needs to be stepped twice, once for
the instruction and once for the delay slot. */
int step_through_delay
if (debug_infrun && step_through_delay)
fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
- if (ecs->event_thread->step_range_end == 0 && step_through_delay)
+ if (ecs->event_thread->control.step_range_end == 0
+ && step_through_delay)
{
/* The user issued a continue when stopped at a breakpoint.
Set up for another trap and get out of here. */
3) set ecs->random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
|| stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP
|| stop_soon == STOP_QUIETLY_REMOTE)
{
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ && stop_after_trap)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
TARGET_SIGNAL_0, meaning: stopped for no particular reason
other than GDB's request. */
if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
- && (ecs->event_thread->stop_signal == TARGET_SIGNAL_STOP
- || ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
- || ecs->event_thread->stop_signal == TARGET_SIGNAL_0))
+ && (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_STOP
+ || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ || ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_0))
{
stop_stepping (ecs);
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
return;
}
/* See if there is a breakpoint at the current PC. */
- ecs->event_thread->stop_bpstat
+ ecs->event_thread->control.stop_bpstat
= bpstat_stop_status (get_regcache_aspace (get_current_regcache ()),
stop_pc, ecs->ptid);
set. */
if (debug_infrun
- && ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
- && !bpstat_explains_signal (ecs->event_thread->stop_bpstat)
+ && ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ && !bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
&& stopped_by_watchpoint)
- fprintf_unfiltered (gdb_stdlog, "\
-infrun: no user watchpoint explains watchpoint SIGTRAP, ignoring\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: no user watchpoint explains "
+ "watchpoint SIGTRAP, ignoring\n");
/* NOTE: cagney/2003-03-29: These two checks for a random signal
at one stage in the past included checks for an inferior
be necessary for call dummies on a non-executable stack on
SPARC. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
- = !(bpstat_explains_signal (ecs->event_thread->stop_bpstat)
+ = !(bpstat_explains_signal (ecs->event_thread->control.stop_bpstat)
|| stopped_by_watchpoint
- || ecs->event_thread->trap_expected
- || (ecs->event_thread->step_range_end
- && ecs->event_thread->step_resume_breakpoint == NULL));
+ || ecs->event_thread->control.trap_expected
+ || (ecs->event_thread->control.step_range_end
+ && (ecs->event_thread->control.step_resume_breakpoint
+ == NULL)));
else
{
- ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
+ ecs->random_signal = !bpstat_explains_signal
+ (ecs->event_thread->control.stop_bpstat);
if (!ecs->random_signal)
- ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_TRAP;
}
}
/* When we reach this point, we've pretty much decided
that the reason for stopping must've been a random
- (unexpected) signal. */
+ (unexpected) signal. */
else
ecs->random_signal = 1;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n",
- ecs->event_thread->stop_signal);
+ ecs->event_thread->suspend.stop_signal);
stopped_by_random_signal = 1;
- if (signal_print[ecs->event_thread->stop_signal])
+ if (signal_print[ecs->event_thread->suspend.stop_signal])
{
printed = 1;
target_terminal_ours_for_output ();
- print_signal_received_reason (ecs->event_thread->stop_signal);
+ print_signal_received_reason
+ (ecs->event_thread->suspend.stop_signal);
}
/* Always stop on signals if we're either just gaining control
of the program, or the user explicitly requested this thread
if (stop_soon != NO_STOP_QUIETLY
|| ecs->event_thread->stop_requested
|| (!inf->detaching
- && signal_stop_state (ecs->event_thread->stop_signal)))
+ && signal_stop_state (ecs->event_thread->suspend.stop_signal)))
{
stop_stepping (ecs);
return;
target_terminal_inferior ();
/* Clear the signal if it should not be passed. */
- if (signal_program[ecs->event_thread->stop_signal] == 0)
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ if (signal_program[ecs->event_thread->suspend.stop_signal] == 0)
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
if (ecs->event_thread->prev_pc == stop_pc
- && ecs->event_thread->trap_expected
- && ecs->event_thread->step_resume_breakpoint == NULL)
+ && ecs->event_thread->control.trap_expected
+ && ecs->event_thread->control.step_resume_breakpoint == NULL)
{
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
return;
}
- if (ecs->event_thread->step_range_end != 0
- && ecs->event_thread->stop_signal != TARGET_SIGNAL_0
- && (ecs->event_thread->step_range_start <= stop_pc
- && stop_pc < ecs->event_thread->step_range_end)
+ if (ecs->event_thread->control.step_range_end != 0
+ && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_0
+ && (ecs->event_thread->control.step_range_start <= stop_pc
+ && stop_pc < ecs->event_thread->control.step_range_end)
&& frame_id_eq (get_stack_frame_id (frame),
- ecs->event_thread->step_stack_frame_id)
- && ecs->event_thread->step_resume_breakpoint == NULL)
+ ecs->event_thread->control.step_stack_frame_id)
+ && ecs->event_thread->control.step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
CORE_ADDR jmp_buf_pc;
struct bpstat_what what;
- what = bpstat_what (ecs->event_thread->stop_bpstat);
+ what = bpstat_what (ecs->event_thread->control.stop_bpstat);
if (what.call_dummy)
{
ecs->event_thread->stepping_over_breakpoint = 1;
- if (!gdbarch_get_longjmp_target_p (gdbarch)
- || !gdbarch_get_longjmp_target (gdbarch, frame, &jmp_buf_pc))
+ if (what.is_longjmp)
{
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "\
-infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n");
- keep_going (ecs);
- return;
- }
+ if (!gdbarch_get_longjmp_target_p (gdbarch)
+ || !gdbarch_get_longjmp_target (gdbarch,
+ frame, &jmp_buf_pc))
+ {
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
+ "(!gdbarch_get_longjmp_target)\n");
+ keep_going (ecs);
+ return;
+ }
- /* We're going to replace the current step-resume breakpoint
- with a longjmp-resume breakpoint. */
- delete_step_resume_breakpoint (ecs->event_thread);
+ /* We're going to replace the current step-resume breakpoint
+ with a longjmp-resume breakpoint. */
+ delete_step_resume_breakpoint (ecs->event_thread);
- /* Insert a breakpoint at resume address. */
- insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ /* Insert a breakpoint at resume address. */
+ insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ }
+ else
+ {
+ struct symbol *func = get_frame_function (frame);
+ if (func)
+ check_exception_resume (ecs, frame, func);
+ }
keep_going (ecs);
return;
fprintf_unfiltered (gdb_stdlog,
"infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
- gdb_assert (ecs->event_thread->step_resume_breakpoint != NULL);
- delete_step_resume_breakpoint (ecs->event_thread);
+ if (what.is_longjmp)
+ {
+ gdb_assert (ecs->event_thread->control.step_resume_breakpoint
+ != NULL);
+ delete_step_resume_breakpoint (ecs->event_thread);
+ }
+ else
+ {
+ /* There are several cases to consider.
+
+ 1. The initiating frame no longer exists. In this case
+ we must stop, because the exception has gone too far.
+
+ 2. The initiating frame exists, and is the same as the
+ current frame. We stop, because the exception has been
+ caught.
+
+ 3. The initiating frame exists and is different from
+ the current frame. This means the exception has been
+ caught beneath the initiating frame, so keep going. */
+ struct frame_info *init_frame
+ = frame_find_by_id (ecs->event_thread->initiating_frame);
+
+ gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
+ != NULL);
+ delete_exception_resume_breakpoint (ecs->event_thread);
+
+ if (init_frame)
+ {
+ struct frame_id current_id
+ = get_frame_id (get_current_frame ());
+ if (frame_id_eq (current_id,
+ ecs->event_thread->initiating_frame))
+ {
+ /* Case 2. Fall through. */
+ }
+ else
+ {
+ /* Case 3. */
+ keep_going (ecs);
+ return;
+ }
+ }
+
+ /* For Cases 1 and 2, remove the step-resume breakpoint,
+ if it exists. */
+ delete_step_resume_breakpoint (ecs->event_thread);
+ }
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
/* However, if the current thread is blocked on some internal
breakpoint, and we simply need to step over that breakpoint
to get it going again, do that first. */
- if ((ecs->event_thread->trap_expected
- && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
+ if ((ecs->event_thread->control.trap_expected
+ && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP)
|| ecs->event_thread->stepping_over_breakpoint)
{
keep_going (ecs);
|| !target_thread_alive (tp->ptid))
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "\
-infrun: not switching back to stepped thread, it has vanished\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: not switching back to "
+ "stepped thread, it has vanished\n");
delete_thread (tp->ptid);
keep_going (ecs);
/* Otherwise, we no longer expect a trap in the current thread.
Clear the trap_expected flag before switching back -- this is
what keep_going would do as well, if we called it. */
- ecs->event_thread->trap_expected = 0;
+ ecs->event_thread->control.trap_expected = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
if (ecs->event_thread->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
- /* Have we reached our destination? If not, keep going. */
+ /* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepping in dynamic linker\n");
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
- caused us to begin stepping. */
+ caused us to begin stepping. */
ecs->event_thread->stepping_through_solib_after_catch = 0;
- bpstat_clear (&ecs->event_thread->stop_bpstat);
- ecs->event_thread->stop_bpstat
+ bpstat_clear (&ecs->event_thread->control.stop_bpstat);
+ ecs->event_thread->control.stop_bpstat
= bpstat_copy (ecs->event_thread->stepping_through_solib_catchpoints);
bpstat_clear (&ecs->event_thread->stepping_through_solib_catchpoints);
stop_print_frame = 1;
return;
}
- if (ecs->event_thread->step_resume_breakpoint)
+ if (ecs->event_thread->control.step_resume_breakpoint)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
return;
}
- if (ecs->event_thread->step_range_end == 0)
+ if (ecs->event_thread->control.step_range_end == 0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
through a function epilogue and therefore must detect when
the current-frame changes in the middle of a line. */
- if (stop_pc >= ecs->event_thread->step_range_start
- && stop_pc < ecs->event_thread->step_range_end
+ if (stop_pc >= ecs->event_thread->control.step_range_start
+ && stop_pc < ecs->event_thread->control.step_range_end
&& (execution_direction != EXEC_REVERSE
|| frame_id_eq (get_frame_id (frame),
- ecs->event_thread->step_frame_id)))
+ ecs->event_thread->control.step_frame_id)))
{
if (debug_infrun)
fprintf_unfiltered
(gdb_stdlog, "infrun: stepping inside range [%s-%s]\n",
- paddress (gdbarch, ecs->event_thread->step_range_start),
- paddress (gdbarch, ecs->event_thread->step_range_end));
+ paddress (gdbarch, ecs->event_thread->control.step_range_start),
+ paddress (gdbarch, ecs->event_thread->control.step_range_end));
/* When stepping backward, stop at beginning of line range
(unless it's the function entry point, in which case
keep going back to the call point). */
- if (stop_pc == ecs->event_thread->step_range_start
+ if (stop_pc == ecs->event_thread->control.step_range_start
&& stop_pc != ecs->stop_func_start
&& execution_direction == EXEC_REVERSE)
{
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
}
down, so there is nothing for us to do here. */
if (execution_direction != EXEC_REVERSE
- && ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
&& in_solib_dynsym_resolve_code (stop_pc))
{
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (gdbarch, stop_pc);
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped into dynsym resolve code\n");
if (pc_after_resolver)
{
return;
}
- if (ecs->event_thread->step_range_end != 1
- && (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
- || ecs->event_thread->step_over_calls == STEP_OVER_ALL)
+ if (ecs->event_thread->control.step_range_end != 1
+ && (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
+ || ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
&& get_frame_type (frame) == SIGTRAMP_FRAME)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped into signal trampoline\n");
/* The inferior, while doing a "step" or "next", has ended up in
a signal trampoline (either by a signal being delivered or by
the signal handler returning). Just single-step until the
have code_addr == &_start. See the comment in frame_id_eq
for more. */
if (!frame_id_eq (get_stack_frame_id (frame),
- ecs->event_thread->step_stack_frame_id)
+ ecs->event_thread->control.step_stack_frame_id)
&& (frame_id_eq (frame_unwind_caller_id (get_current_frame ()),
- ecs->event_thread->step_stack_frame_id)
- && (!frame_id_eq (ecs->event_thread->step_stack_frame_id,
+ ecs->event_thread->control.step_stack_frame_id)
+ && (!frame_id_eq (ecs->event_thread->control.step_stack_frame_id,
outer_frame_id)
|| step_start_function != find_pc_function (stop_pc))))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
- if ((ecs->event_thread->step_over_calls == STEP_OVER_NONE)
- || ((ecs->event_thread->step_range_end == 1)
+ if ((ecs->event_thread->control.step_over_calls == STEP_OVER_NONE)
+ || ((ecs->event_thread->control.step_range_end == 1)
&& in_prologue (gdbarch, ecs->event_thread->prev_pc,
ecs->stop_func_start)))
{
thought it was a subroutine call but it was not. Stop as
well. FENN */
/* And this works the same backward as frontward. MVS */
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
/* Reverse stepping through solib trampolines. */
if (execution_direction == EXEC_REVERSE
- && ecs->event_thread->step_over_calls != STEP_OVER_NONE
+ && ecs->event_thread->control.step_over_calls != STEP_OVER_NONE
&& (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc)
|| (ecs->stop_func_start == 0
&& in_solib_dynsym_resolve_code (stop_pc))))
return;
}
- if (ecs->event_thread->step_over_calls == STEP_OVER_ALL)
+ if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
{
/* We're doing a "next".
struct symtab_and_line tmp_sal;
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
- tmp_sal.pspace = get_frame_program_space (frame);
if (tmp_sal.line != 0)
{
if (execution_direction == EXEC_REVERSE)
/* If we have no line number and the step-stop-if-no-debug is
set, we stop the step so that the user has a chance to switch
in assembly mode. */
- if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
&& step_stop_if_no_debug)
{
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
/* Reverse stepping through solib trampolines. */
if (execution_direction == EXEC_REVERSE
- && ecs->event_thread->step_over_calls != STEP_OVER_NONE)
+ && ecs->event_thread->control.step_over_calls != STEP_OVER_NONE)
{
if (gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc)
|| (ecs->stop_func_start == 0
real_stop_pc = gdbarch_skip_trampoline_code (gdbarch, frame, stop_pc);
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped into solib return tramp\n");
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
{
- /* And put the step-breakpoint there and go until there. */
+ /* And put the step-breakpoint there and go until there. */
struct symtab_and_line sr_sal;
init_sal (&sr_sal); /* initialize to zeroes */
/* NOTE: tausq/2004-05-24: This if block used to be done before all
the trampoline processing logic, however, there are some trampolines
that have no names, so we should do trampoline handling first. */
- if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
+ if (ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE
&& ecs->stop_func_name == NULL
&& stop_pc_sal.line == 0)
{
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped into undebuggable function\n");
/* The inferior just stepped into, or returned to, an
undebuggable function (where there is no debugging information
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
switch in assembly mode. */
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
}
}
- if (ecs->event_thread->step_range_end == 1)
+ if (ecs->event_thread->control.step_range_end == 1)
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
or can this happen as a result of a return or longjmp?). */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
a new inline function. */
if (frame_id_eq (get_frame_id (get_current_frame ()),
- ecs->event_thread->step_frame_id)
+ ecs->event_thread->control.step_frame_id)
&& inline_skipped_frames (ecs->ptid))
{
struct symtab_and_line call_sal;
find_frame_sal (get_current_frame (), &call_sal);
- if (ecs->event_thread->step_over_calls != STEP_OVER_ALL)
+ if (ecs->event_thread->control.step_over_calls != STEP_OVER_ALL)
{
/* For "step", we're going to stop. But if the call site
for this inlined function is on the same source line as
&& call_sal.symtab == ecs->event_thread->current_symtab)
step_into_inline_frame (ecs->ptid);
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
keep_going (ecs);
else
{
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
}
if (get_frame_type (get_current_frame ()) == INLINE_FRAME
&& !frame_id_eq (get_frame_id (get_current_frame ()),
- ecs->event_thread->step_frame_id)
+ ecs->event_thread->control.step_frame_id)
&& stepped_in_from (get_current_frame (),
- ecs->event_thread->step_frame_id))
+ ecs->event_thread->control.step_frame_id))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: stepping through inlined function\n");
- if (ecs->event_thread->step_over_calls == STEP_OVER_ALL)
+ if (ecs->event_thread->control.step_over_calls == STEP_OVER_ALL)
keep_going (ecs);
else
{
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
}
That is said to make things like for (;;) statements work
better. */
if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
- ecs->event_thread->stop_step = 1;
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: stepped to a different line\n");
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
new line in mid-statement, we continue stepping. This makes
things like for(;;) statements work better.) */
- ecs->event_thread->step_range_start = stop_pc_sal.pc;
- ecs->event_thread->step_range_end = stop_pc_sal.end;
+ ecs->event_thread->control.step_range_start = stop_pc_sal.pc;
+ ecs->event_thread->control.step_range_end = stop_pc_sal.end;
set_step_info (frame, stop_pc_sal);
if (debug_infrun)
static int
currently_stepping (struct thread_info *tp)
{
- return ((tp->step_range_end && tp->step_resume_breakpoint == NULL)
- || tp->trap_expected
- || tp->stepping_through_solib_after_catch
- || bpstat_should_step ());
+ return ((tp->control.step_range_end
+ && tp->control.step_resume_breakpoint == NULL)
+ || tp->control.trap_expected
+ || tp->stepping_through_solib_after_catch
+ || bpstat_should_step ());
}
/* Returns true if any thread *but* the one passed in "data" is in the
if (tp == data)
return 0;
- return (tp->step_range_end
- || tp->trap_expected
+ return (tp->control.step_range_end
+ || tp->control.trap_expected
|| tp->stepping_through_solib_after_catch);
}
if (ecs->stop_func_start == stop_pc)
{
/* We are already there: stop now. */
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
return;
insert_step_resume_breakpoint_at_sal (gdbarch, sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
- ecs->event_thread->step_range_end = ecs->event_thread->step_range_start;
+ ecs->event_thread->control.step_range_end
+ = ecs->event_thread->control.step_range_start;
}
keep_going (ecs);
}
if (stop_func_sal.pc == stop_pc)
{
/* We're there already. Just stop stepping now. */
- ecs->event_thread->stop_step = 1;
+ ecs->event_thread->control.stop_step = 1;
print_end_stepping_range_reason ();
stop_stepping (ecs);
}
/* Else just reset the step range and keep going.
No step-resume breakpoint, they don't work for
epilogues, which can have multiple entry paths. */
- ecs->event_thread->step_range_start = stop_func_sal.pc;
- ecs->event_thread->step_range_end = stop_func_sal.end;
+ ecs->event_thread->control.step_range_start = stop_func_sal.pc;
+ ecs->event_thread->control.step_range_end = stop_func_sal.end;
keep_going (ecs);
}
return;
/* There should never be more than one step-resume or longjmp-resume
breakpoint per thread, so we should never be setting a new
step_resume_breakpoint when one is already active. */
- gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
+ gdb_assert (inferior_thread ()->control.step_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting step-resume breakpoint at %s\n",
paddress (gdbarch, sr_sal.pc));
- inferior_thread ()->step_resume_breakpoint
+ inferior_thread ()->control.step_resume_breakpoint
= set_momentary_breakpoint (gdbarch, sr_sal, sr_id, bp_step_resume);
}
/* There should never be more than one step-resume or longjmp-resume
breakpoint per thread, so we should never be setting a new
longjmp_resume_breakpoint when one is already active. */
- gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
+ gdb_assert (inferior_thread ()->control.step_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting longjmp-resume breakpoint at %s\n",
paddress (gdbarch, pc));
- inferior_thread ()->step_resume_breakpoint =
+ inferior_thread ()->control.step_resume_breakpoint =
set_momentary_breakpoint_at_pc (gdbarch, pc, bp_longjmp_resume);
}
+/* Insert an exception resume breakpoint. TP is the thread throwing
+ the exception. The block B is the block of the unwinder debug hook
+ function. FRAME is the frame corresponding to the call to this
+ function. SYM is the symbol of the function argument holding the
+ target PC of the exception. */
+
+static void
+insert_exception_resume_breakpoint (struct thread_info *tp,
+ struct block *b,
+ struct frame_info *frame,
+ struct symbol *sym)
+{
+ struct gdb_exception e;
+
+ /* We want to ignore errors here. */
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ {
+ struct symbol *vsym;
+ struct value *value;
+ CORE_ADDR handler;
+ struct breakpoint *bp;
+
+ vsym = lookup_symbol (SYMBOL_LINKAGE_NAME (sym), b, VAR_DOMAIN, NULL);
+ value = read_var_value (vsym, frame);
+ /* If the value was optimized out, revert to the old behavior. */
+ if (! value_optimized_out (value))
+ {
+ handler = value_as_address (value);
+
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: exception resume at %lx\n",
+ (unsigned long) handler);
+
+ bp = set_momentary_breakpoint_at_pc (get_frame_arch (frame),
+ handler, bp_exception_resume);
+ bp->thread = tp->num;
+ inferior_thread ()->control.exception_resume_breakpoint = bp;
+ }
+ }
+}
+
+/* This is called when an exception has been intercepted. Check to
+ see whether the exception's destination is of interest, and if so,
+ set an exception resume breakpoint there. */
+
+static void
+check_exception_resume (struct execution_control_state *ecs,
+ struct frame_info *frame, struct symbol *func)
+{
+ struct gdb_exception e;
+
+ TRY_CATCH (e, RETURN_MASK_ERROR)
+ {
+ struct block *b;
+ struct dict_iterator iter;
+ struct symbol *sym;
+ int argno = 0;
+
+ /* The exception breakpoint is a thread-specific breakpoint on
+ the unwinder's debug hook, declared as:
+
+ void _Unwind_DebugHook (void *cfa, void *handler);
+
+ The CFA argument indicates the frame to which control is
+ about to be transferred. HANDLER is the destination PC.
+
+ We ignore the CFA and set a temporary breakpoint at HANDLER.
+ This is not extremely efficient but it avoids issues in gdb
+ with computing the DWARF CFA, and it also works even in weird
+ cases such as throwing an exception from inside a signal
+ handler. */
+
+ b = SYMBOL_BLOCK_VALUE (func);
+ ALL_BLOCK_SYMBOLS (b, iter, sym)
+ {
+ if (!SYMBOL_IS_ARGUMENT (sym))
+ continue;
+
+ if (argno == 0)
+ ++argno;
+ else
+ {
+ insert_exception_resume_breakpoint (ecs->event_thread,
+ b, frame, sym);
+ break;
+ }
+ }
+ }
+}
+
static void
stop_stepping (struct execution_control_state *ecs)
{
/* This function handles various cases where we need to continue
waiting for the inferior. */
-/* (Used to be the keep_going: label in the old wait_for_inferior) */
+/* (Used to be the keep_going: label in the old wait_for_inferior). */
static void
keep_going (struct execution_control_state *ecs)
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
- if (ecs->event_thread->trap_expected
- && ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
+ if (ecs->event_thread->control.trap_expected
+ && ecs->event_thread->suspend.stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd not get here) and we haven't yet
discard_cleanups (old_cleanups);
resume (currently_stepping (ecs->event_thread),
- ecs->event_thread->stop_signal);
+ ecs->event_thread->suspend.stop_signal);
}
else
{
}
}
- ecs->event_thread->trap_expected = ecs->event_thread->stepping_over_breakpoint;
+ ecs->event_thread->control.trap_expected
+ = ecs->event_thread->stepping_over_breakpoint;
/* Do not deliver SIGNAL_TRAP (except when the user explicitly
specifies that such a signal should be delivered to the
halts the simulation handing control to GDB; GDB, noteing
that the break-point isn't valid, returns control back to the
simulator; the simulator then delivers the hardware
- equivalent of a SIGNAL_TRAP to the program being debugged. */
+ equivalent of a SIGNAL_TRAP to the program being debugged. */
- if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
- && !signal_program[ecs->event_thread->stop_signal])
- ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
+ if (ecs->event_thread->suspend.stop_signal == TARGET_SIGNAL_TRAP
+ && !signal_program[ecs->event_thread->suspend.stop_signal])
+ ecs->event_thread->suspend.stop_signal = TARGET_SIGNAL_0;
discard_cleanups (old_cleanups);
resume (currently_stepping (ecs->event_thread),
- ecs->event_thread->stop_signal);
+ ecs->event_thread->suspend.stop_signal);
}
prepare_to_wait (ecs);
static void
print_end_stepping_range_reason (void)
{
- if ((!inferior_thread ()->step_multi || !inferior_thread ()->stop_step)
+ if ((!inferior_thread ()->step_multi
+ || !inferior_thread ()->control.stop_step)
&& ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason",
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
static void
print_exited_reason (int exitstatus)
{
+ struct inferior *inf = current_inferior ();
+ const char *pidstr = target_pid_to_str (pid_to_ptid (inf->pid));
+
annotate_exited (exitstatus);
if (exitstatus)
{
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason",
async_reason_lookup (EXEC_ASYNC_EXITED));
- ui_out_text (uiout, "\nProgram exited with code ");
+ ui_out_text (uiout, "[Inferior ");
+ ui_out_text (uiout, plongest (inf->num));
+ ui_out_text (uiout, " (");
+ ui_out_text (uiout, pidstr);
+ ui_out_text (uiout, ") exited with code ");
ui_out_field_fmt (uiout, "exit-code", "0%o", (unsigned int) exitstatus);
- ui_out_text (uiout, ".\n");
+ ui_out_text (uiout, "]\n");
}
else
{
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
- ui_out_text (uiout, "\nProgram exited normally.\n");
+ ui_out_text (uiout, "[Inferior ");
+ ui_out_text (uiout, plongest (inf->num));
+ ui_out_text (uiout, " (");
+ ui_out_text (uiout, pidstr);
+ ui_out_text (uiout, ") exited normally]\n");
}
/* Support the --return-child-result option. */
return_child_result_value = exitstatus;
}
/* Signal received, print why the inferior has stopped. The signal table
- tells us to print about it. */
+ tells us to print about it. */
static void
print_signal_received_reason (enum target_signal siggnal)
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
- printf_filtered (_("\
-Cannot remove breakpoints because program is no longer writable.\n\
-Further execution is probably impossible.\n"));
+ printf_filtered (_("Cannot remove breakpoints because "
+ "program is no longer writable.\nFurther "
+ "execution is probably impossible.\n"));
}
}
&& last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED
&& inferior_thread ()->step_multi
- && inferior_thread ()->stop_step)
+ && inferior_thread ()->control.stop_step)
goto done;
target_terminal_ours ();
/* Select innermost stack frame - i.e., current frame is frame 0,
and current location is based on that.
Don't do this on return from a stack dummy routine,
- or if the program has exited. */
+ or if the program has exited. */
if (!stop_stack_dummy)
{
we have changed functions or hit a breakpoint.
Print source line if we have one.
bpstat_print() contains the logic deciding in detail
- what to print, based on the event(s) that just occurred. */
+ what to print, based on the event(s) that just occurred. */
/* If --batch-silent is enabled then there's no need to print the current
source location, and to try risks causing an error message about
int do_frame_printing = 1;
struct thread_info *tp = inferior_thread ();
- bpstat_ret = bpstat_print (tp->stop_bpstat);
+ bpstat_ret = bpstat_print (tp->control.stop_bpstat);
switch (bpstat_ret)
{
case PRINT_UNKNOWN:
/* FIXME: cagney/2002-12-01: Given that a frame ID does
(or should) carry around the function and does (or
should) use that when doing a frame comparison. */
- if (tp->stop_step
- && frame_id_eq (tp->step_frame_id,
+ if (tp->control.stop_step
+ && frame_id_eq (tp->control.step_frame_id,
get_frame_id (get_current_frame ()))
&& step_start_function == find_pc_function (stop_pc))
- source_flag = SRC_LINE; /* finished step, just print source line */
+ source_flag = SRC_LINE; /* Finished step, just
+ print source line. */
else
- source_flag = SRC_AND_LOC; /* print location and source line */
+ source_flag = SRC_AND_LOC; /* Print location and
+ source line. */
break;
case PRINT_SRC_AND_LOC:
- source_flag = SRC_AND_LOC; /* print location and source line */
+ source_flag = SRC_AND_LOC; /* Print location and
+ source line. */
break;
case PRINT_SRC_ONLY:
source_flag = SRC_LINE;
flag is:
SRC_LINE: Print only source line
LOCATION: Print only location
- SRC_AND_LOC: Print location and source line */
+ SRC_AND_LOC: Print location and source line. */
if (do_frame_printing)
print_stack_frame (get_selected_frame (NULL), 0, source_flag);
/* Save the function value return registers, if we care.
We might be about to restore their previous contents. */
- if (inferior_thread ()->proceed_to_finish)
+ if (inferior_thread ()->control.proceed_to_finish)
{
/* This should not be necessary. */
if (stop_registers)
{
/* Pop the empty frame that contains the stack dummy.
This also restores inferior state prior to the call
- (struct inferior_thread_state). */
+ (struct infcall_suspend_state). */
struct frame_info *frame = get_current_frame ();
gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
frame_pop (frame);
- /* frame_pop() calls reinit_frame_cache as the last thing it does
- which means there's currently no selected frame. We don't need
- to re-establish a selected frame if the dummy call returns normally,
- that will be done by restore_inferior_status. However, we do have
- to handle the case where the dummy call is returning after being
- stopped (e.g. the dummy call previously hit a breakpoint). We
- can't know which case we have so just always re-establish a
- selected frame here. */
+ /* frame_pop() calls reinit_frame_cache as the last thing it
+ does which means there's currently no selected frame. We
+ don't need to re-establish a selected frame if the dummy call
+ returns normally, that will be done by
+ restore_infcall_control_state. However, we do have to handle
+ the case where the dummy call is returning after being
+ stopped (e.g. the dummy call previously hit a breakpoint).
+ We can't know which case we have so just always re-establish
+ a selected frame here. */
select_frame (get_current_frame ());
}
|| last.kind == TARGET_WAITKIND_SIGNALLED
|| last.kind == TARGET_WAITKIND_EXITED
|| (!inferior_thread ()->step_multi
- && !(inferior_thread ()->stop_bpstat
- && inferior_thread ()->proceed_to_finish)
- && !inferior_thread ()->in_infcall))
+ && !(inferior_thread ()->control.stop_bpstat
+ && inferior_thread ()->control.proceed_to_finish)
+ && !inferior_thread ()->control.in_infcall))
{
if (!ptid_equal (inferior_ptid, null_ptid))
- observer_notify_normal_stop (inferior_thread ()->stop_bpstat,
+ observer_notify_normal_stop (inferior_thread ()->control.stop_bpstat,
stop_print_frame);
else
observer_notify_normal_stop (NULL, stop_print_frame);
&& last.kind != TARGET_WAITKIND_EXITED)
/* Delete the breakpoint we stopped at, if it wants to be deleted.
Delete any breakpoint that is to be deleted at the next stop. */
- breakpoint_auto_delete (inferior_thread ()->stop_bpstat);
+ breakpoint_auto_delete (inferior_thread ()->control.stop_bpstat);
}
/* Try to get rid of automatically added inferiors that are no
static void
sig_print_header (void)
{
- printf_filtered (_("\
-Signal Stop\tPrint\tPass to program\tDescription\n"));
+ printf_filtered (_("Signal Stop\tPrint\tPass "
+ "to program\tDescription\n"));
}
static void
error_no_arg (_("signal to handle"));
}
- /* Allocate and zero an array of flags for which signals to handle. */
+ /* Allocate and zero an array of flags for which signals to handle. */
nsigs = (int) TARGET_SIGNAL_LAST;
sigs = (unsigned char *) alloca (nsigs);
memset (sigs, 0, nsigs);
- /* Break the command line up into args. */
+ /* Break the command line up into args. */
argv = gdb_buildargv (args);
old_chain = make_cleanup_freeargv (argv);
/* Walk through the args, looking for signal oursigs, signal names, and
actions. Signal numbers and signal names may be interspersed with
actions, with the actions being performed for all signals cumulatively
- specified. Signal ranges can be specified as <LOW>-<HIGH>. */
+ specified. Signal ranges can be specified as <LOW>-<HIGH>. */
while (*argv != NULL)
{
if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
{
/* Apply action to all signals except those used by the
- debugger. Silently skip those. */
+ debugger. Silently skip those. */
allsigs = 1;
sigfirst = 0;
siglast = nsigs - 1;
}
if (sigfirst > siglast)
{
- /* Bet he didn't figure we'd think of this case... */
+ /* Bet he didn't figure we'd think of this case... */
signum = sigfirst;
sigfirst = siglast;
siglast = signum;
}
/* If any signal numbers or symbol names were found, set flags for
- which signals to apply actions to. */
+ which signals to apply actions to. */
for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
if (!allsigs && !sigs[signum])
{
if (query (_("%s is used by the debugger.\n\
-Are you sure you want to change it? "), target_signal_to_name ((enum target_signal) signum)))
+Are you sure you want to change it? "),
+ target_signal_to_name ((enum target_signal) signum)))
{
sigs[signum] = 1;
}
if (args == NULL)
error_no_arg (_("xdb command"));
- /* Break the command line up into args. */
+ /* Break the command line up into args. */
argv = gdb_buildargv (args);
old_chain = make_cleanup_freeargv (argv);
sig_print_info (oursig);
}
- printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
+ printf_filtered (_("\nUse the \"handle\" command "
+ "to change these tables.\n"));
}
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
- fetch the data. The type can change depending on gdbarch, so it it
+ fetch the data. The type can change depending on gdbarch, so it is
also dependent on which thread you have selected.
1. making $_siginfo be an internalvar that creates a new value on
}
\f
-/* Inferior thread state.
- These are details related to the inferior itself, and don't include
- things like what frame the user had selected or what gdb was doing
- with the target at the time.
- For inferior function calls these are things we want to restore
- regardless of whether the function call successfully completes
- or the dummy frame has to be manually popped. */
+/* infcall_suspend_state contains state about the program itself like its
+ registers and any signal it received when it last stopped.
+ This state must be restored regardless of how the inferior function call
+ ends (either successfully, or after it hits a breakpoint or signal)
+ if the program is to properly continue where it left off. */
-struct inferior_thread_state
+struct infcall_suspend_state
{
- enum target_signal stop_signal;
+ struct thread_suspend_state thread_suspend;
+ struct inferior_suspend_state inferior_suspend;
+
+ /* Other fields: */
CORE_ADDR stop_pc;
struct regcache *registers;
gdb_byte *siginfo_data;
};
-struct inferior_thread_state *
-save_inferior_thread_state (void)
+struct infcall_suspend_state *
+save_infcall_suspend_state (void)
{
- struct inferior_thread_state *inf_state;
+ struct infcall_suspend_state *inf_state;
struct thread_info *tp = inferior_thread ();
+ struct inferior *inf = current_inferior ();
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
gdb_byte *siginfo_data = NULL;
}
}
- inf_state = XZALLOC (struct inferior_thread_state);
+ inf_state = XZALLOC (struct infcall_suspend_state);
if (siginfo_data)
{
inf_state->siginfo_data = siginfo_data;
}
- inf_state->stop_signal = tp->stop_signal;
+ inf_state->thread_suspend = tp->suspend;
+ inf_state->inferior_suspend = inf->suspend;
+
/* run_inferior_call will not use the signal due to its `proceed' call with
TARGET_SIGNAL_0 anyway. */
- tp->stop_signal = TARGET_SIGNAL_0;
+ tp->suspend.stop_signal = TARGET_SIGNAL_0;
inf_state->stop_pc = stop_pc;
/* Restore inferior session state to INF_STATE. */
void
-restore_inferior_thread_state (struct inferior_thread_state *inf_state)
+restore_infcall_suspend_state (struct infcall_suspend_state *inf_state)
{
struct thread_info *tp = inferior_thread ();
+ struct inferior *inf = current_inferior ();
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
- tp->stop_signal = inf_state->stop_signal;
+ tp->suspend = inf_state->thread_suspend;
+ inf->suspend = inf_state->inferior_suspend;
+
stop_pc = inf_state->stop_pc;
if (inf_state->siginfo_gdbarch == gdbarch)
/* NB: The register write goes through to the target. */
regcache_cpy (regcache, inf_state->registers);
- discard_inferior_thread_state (inf_state);
+ discard_infcall_suspend_state (inf_state);
}
static void
-do_restore_inferior_thread_state_cleanup (void *state)
+do_restore_infcall_suspend_state_cleanup (void *state)
{
- restore_inferior_thread_state (state);
+ restore_infcall_suspend_state (state);
}
struct cleanup *
-make_cleanup_restore_inferior_thread_state (struct inferior_thread_state *inf_state)
+make_cleanup_restore_infcall_suspend_state
+ (struct infcall_suspend_state *inf_state)
{
- return make_cleanup (do_restore_inferior_thread_state_cleanup, inf_state);
+ return make_cleanup (do_restore_infcall_suspend_state_cleanup, inf_state);
}
void
-discard_inferior_thread_state (struct inferior_thread_state *inf_state)
+discard_infcall_suspend_state (struct infcall_suspend_state *inf_state)
{
regcache_xfree (inf_state->registers);
xfree (inf_state->siginfo_data);
}
struct regcache *
-get_inferior_thread_state_regcache (struct inferior_thread_state *inf_state)
+get_infcall_suspend_state_regcache (struct infcall_suspend_state *inf_state)
{
return inf_state->registers;
}
-/* Session related state for inferior function calls.
- These are the additional bits of state that need to be restored
- when an inferior function call successfully completes.
-
- Keep the fields in order as present in their original structures. */
+/* infcall_control_state contains state regarding gdb's control of the
+ inferior itself like stepping control. It also contains session state like
+ the user's currently selected frame. */
-struct inferior_status
+struct infcall_control_state
{
- /* Direct copies of the struct thread_info fields: */
- CORE_ADDR step_range_start;
- CORE_ADDR step_range_end;
- struct frame_id step_frame_id;
- struct frame_id step_stack_frame_id;
- int trap_expected;
- int proceed_to_finish;
- int in_infcall;
- enum step_over_calls_kind step_over_calls;
- int stop_step;
- bpstat stop_bpstat;
-
- /* Direct copies of the struct inferior fields: */
- int stop_soon;
+ struct thread_control_state thread_control;
+ struct inferior_control_state inferior_control;
/* Other fields: */
enum stop_stack_kind stop_stack_dummy;
/* Save all of the information associated with the inferior<==>gdb
connection. */
-struct inferior_status *
-save_inferior_status (void)
+struct infcall_control_state *
+save_infcall_control_state (void)
{
- struct inferior_status *inf_status = XMALLOC (struct inferior_status);
+ struct infcall_control_state *inf_status = xmalloc (sizeof (*inf_status));
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
- /* Direct copies of the struct thread_info fields: */
- inf_status->step_range_start = tp->step_range_start;
- inf_status->step_range_end = tp->step_range_end;
- inf_status->step_frame_id = tp->step_frame_id;
- inf_status->step_stack_frame_id = tp->step_stack_frame_id;
- inf_status->trap_expected = tp->trap_expected;
- inf_status->proceed_to_finish = tp->proceed_to_finish;
- inf_status->in_infcall = tp->in_infcall;
- inf_status->step_over_calls = tp->step_over_calls;
- inf_status->stop_step = tp->stop_step;
-
- /* Save original bpstat chain here; replace it with copy of chain.
- If caller's caller is walking the chain, they'll be happier if we
- hand them back the original chain when restore_inferior_status is
- called. */
- inf_status->stop_bpstat = tp->stop_bpstat;
- tp->stop_bpstat = bpstat_copy (tp->stop_bpstat);
+ inf_status->thread_control = tp->control;
+ inf_status->inferior_control = inf->control;
- /* Direct copies of the struct inferior fields: */
- inf_status->stop_soon = inf->stop_soon;
+ tp->control.step_resume_breakpoint = NULL;
+ tp->control.exception_resume_breakpoint = NULL;
+
+ /* Save original bpstat chain to INF_STATUS; replace it in TP with copy of
+ chain. If caller's caller is walking the chain, they'll be happier if we
+ hand them back the original chain when restore_infcall_control_state is
+ called. */
+ tp->control.stop_bpstat = bpstat_copy (tp->control.stop_bpstat);
/* Other fields: */
inf_status->stop_stack_dummy = stop_stack_dummy;
/* Restore inferior session state to INF_STATUS. */
void
-restore_inferior_status (struct inferior_status *inf_status)
+restore_infcall_control_state (struct infcall_control_state *inf_status)
{
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
- /* Direct copies of the struct thread_info fields: */
- tp->step_range_start = inf_status->step_range_start;
- tp->step_range_end = inf_status->step_range_end;
- tp->step_frame_id = inf_status->step_frame_id;
- tp->step_stack_frame_id = inf_status->step_stack_frame_id;
- tp->trap_expected = inf_status->trap_expected;
- tp->proceed_to_finish = inf_status->proceed_to_finish;
- tp->in_infcall = inf_status->in_infcall;
- tp->step_over_calls = inf_status->step_over_calls;
- tp->stop_step = inf_status->stop_step;
+ if (tp->control.step_resume_breakpoint)
+ tp->control.step_resume_breakpoint->disposition = disp_del_at_next_stop;
+
+ if (tp->control.exception_resume_breakpoint)
+ tp->control.exception_resume_breakpoint->disposition
+ = disp_del_at_next_stop;
/* Handle the bpstat_copy of the chain. */
- bpstat_clear (&tp->stop_bpstat);
- tp->stop_bpstat = inf_status->stop_bpstat;
- inf_status->stop_bpstat = NULL;
+ bpstat_clear (&tp->control.stop_bpstat);
- /* Direct copies of the struct inferior fields: */
- inf->stop_soon = inf_status->stop_soon;
+ tp->control = inf_status->thread_control;
+ inf->control = inf_status->inferior_control;
/* Other fields: */
stop_stack_dummy = inf_status->stop_stack_dummy;
}
static void
-do_restore_inferior_status_cleanup (void *sts)
+do_restore_infcall_control_state_cleanup (void *sts)
{
- restore_inferior_status (sts);
+ restore_infcall_control_state (sts);
}
struct cleanup *
-make_cleanup_restore_inferior_status (struct inferior_status *inf_status)
+make_cleanup_restore_infcall_control_state
+ (struct infcall_control_state *inf_status)
{
- return make_cleanup (do_restore_inferior_status_cleanup, inf_status);
+ return make_cleanup (do_restore_infcall_control_state_cleanup, inf_status);
}
void
-discard_inferior_status (struct inferior_status *inf_status)
+discard_infcall_control_state (struct infcall_control_state *inf_status)
{
- /* See save_inferior_status for info on stop_bpstat. */
- bpstat_clear (&inf_status->stop_bpstat);
+ if (inf_status->thread_control.step_resume_breakpoint)
+ inf_status->thread_control.step_resume_breakpoint->disposition
+ = disp_del_at_next_stop;
+
+ if (inf_status->thread_control.exception_resume_breakpoint)
+ inf_status->thread_control.exception_resume_breakpoint->disposition
+ = disp_del_at_next_stop;
+
+ /* See save_infcall_control_state for info on stop_bpstat. */
+ bpstat_clear (&inf_status->thread_control.stop_bpstat);
+
xfree (inf_status);
}
\f
int
ptid_match (ptid_t ptid, ptid_t filter)
{
- /* Since both parameters have the same type, prevent easy mistakes
- from happening. */
- gdb_assert (!ptid_equal (ptid, minus_one_ptid)
- && !ptid_equal (ptid, null_ptid));
-
if (ptid_equal (filter, minus_one_ptid))
return 1;
if (ptid_is_pid (filter)
break;
case EXEC_ERROR:
default:
- fprintf_filtered (out,
- _("Forward (target `%s' does not support exec-direction).\n"),
+ fprintf_filtered (out, _("Forward (target `%s' does not "
+ "support exec-direction).\n"),
target_shortname);
break;
}
show_schedule_multiple (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Resuming the execution of threads of all processes is %s.\n"), value);
+ fprintf_filtered (file, _("Resuming the execution of threads "
+ "of all processes is %s.\n"), value);
}
void
show_debug_infrun,
&setdebuglist, &showdebuglist);
- add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\
+ add_setshow_boolean_cmd ("displaced", class_maintenance,
+ &debug_displaced, _("\
Set displaced stepping debugging."), _("\
Show displaced stepping debugging."), _("\
When non-zero, displaced stepping specific debugging is enabled."),
signal_print[TARGET_SIGNAL_URG] = 0;
signal_stop[TARGET_SIGNAL_WINCH] = 0;
signal_print[TARGET_SIGNAL_WINCH] = 0;
+ signal_stop[TARGET_SIGNAL_PRIO] = 0;
+ signal_print[TARGET_SIGNAL_PRIO] = 0;
/* These signals are used internally by user-level thread
implementations. (See signal(5) on Solaris.) Like the above
projects / binutils.git / blobdiff