# Options to extract the man page from as.texinfo
MANCONF = -Dman
-TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl
+TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
POD2MAN = pod2man --center="GNU Development Tools" \
--release="binutils-$(VERSION)" --section=1
$(DEMANGLER_NAME).1
info_TEXINFOS = binutils.texi
-
-config.texi: Makefile
- rm -f config.texi
- echo '@set VERSION $(VERSION)' > config.texi
-
+binutils_TEXINFOS = config.texi
binutils_TEXI = $(srcdir)/binutils.texi
-binutils.dvi: $(binutils_TEXI) config.texi
+AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
+TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty"
-binutils.info: $(binutils_TEXI) config.texi
+config.texi: $(srcdir)/../../bfd/configure $(binutils_TEXI)
+ rm -f config.texi
+ eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
+ echo "@set VERSION $$VERSION" > $@
+ echo "@set UPDATED `date '+%B %Y'`" >> config.texi
# Man page generation from texinfo
-addr2line.1: $(binutils_TEXI)
+addr2line.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $< > addr2line.pod
+ -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
rm -f addr2line.pod
-ar.1: $(binutils_TEXI)
+ar.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $< > ar.pod
+ -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
rm -f ar.pod
-dlltool.1: $(binutils_TEXI)
+dlltool.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $< > dlltool.pod
+ -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
rm -f dlltool.pod
-nlmconv.1: $(binutils_TEXI)
+nlmconv.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dnlmconv < $< > nlmconv.pod
+ -$(TEXI2POD) $(MANCONF) -Dnlmconv < $(binutils_TEXI) > nlmconv.pod
rm -f nlmconv.pod
-nm.1: $(binutils_TEXI)
+nm.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $< > nm.pod
+ -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
rm -f nm.pod
-objcopy.1: $(binutils_TEXI)
+objcopy.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $< > objcopy.pod
+ -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
rm -f objcopy.pod
-objdump.1: $(binutils_TEXI)
+objdump.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $< > objdump.pod
+ -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
rm -f objdump.pod
-ranlib.1: $(binutils_TEXI)
+ranlib.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $< > ranlib.pod
+ -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
rm -f ranlib.pod
-readelf.1: $(binutils_TEXI)
+readelf.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $< > readelf.pod
+ -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
rm -f readelf.pod
-size.1: $(binutils_TEXI)
+size.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $< > size.pod
+ -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
rm -f size.pod
-strings.1: $(binutils_TEXI)
+strings.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $< > strings.pod
+ -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
rm -f strings.pod
-strip.1: $(binutils_TEXI)
+strip.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $< > strip.pod
+ -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
rm -f strip.pod
-windres.1: $(binutils_TEXI)
+windres.1: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $< > windres.pod
+ -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
rm -f windres.pod
-cxxfilt.man: $(binutils_TEXI)
+cxxfilt.man: $(binutils_TEXI) $(binutils_TEXINFOS)
touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $< > $(DEMANGLER_NAME).pod
+ -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' >
[email protected]$$$$ && \
rm -f $(DEMANGLER_NAME).pod
MAINTAINERCLEANFILES = config.texi
-DISTCLEANFILES = config.texi
MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
-install: install-info
+install-data-local: install-info
+
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+ f=$(html__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+ else \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ fi; \
+ done
+
+MAINTAINERCLEANFILES += binutils.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES. It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = binutils.info
+endif
# Maintenance
# We need it for the taz target in ../../Makefile.in.
-info: $(MANS)
+info-local: $(MANS)
projects / binutils.git / blobdiff