+
+ * rs6000-tdep.c (rs6000_gdbarch_init): Don't set tm_print_insn;
+ it's no longer required.
+
+
+ * Makefile.in (gdbtk-wrapper.o): Add missing dependencies.
+
+
+ * rs6000-tdep.c (rs6000_software_single_step): Use
+ rs6000_breakpoint_from_pc() to fetch breakpoint instruction
+ and size. Use target_insert_breakpoint() and
+ target_remove_breakpoint() to insert and remove breakpoints
+ instead of explicit memory reads and writes.
+
+
+ * config/powerpc/tm-ppc-eabi.h (ELF_OBJECT_FORMAT): Delete.
+ * rs6000-tdep.c (rs6000_push_arguments): Eliminate
+ ELF_OBJECT_FORMAT ifdef.
+
+
+ * rs6000-tdep.c (rs6000_gdbarch_init): Use set_gdbarch_print_insn().
+
+
+ * rs6000-tdep.c (rs6000_fix_call_dummy): Delete unused macro
+ definitions for TOC_ADDR_OFFSET and TARGET_ADDR_OFFSET.
+
+
+ * fbsd-proc.c (child_pid_to_exec_file, fbsd_find_memory_regions):
+ s/asprintf/xasprintf/.
+ (fbsd_make_corefile_notes): s/strdup/xstrdup/.
+
+
+ I believe Jeff Law denies responsability for this one:
+ * config/pa/hpux11w.mh (MH_CFLAGS): Add -Dvfork=fork.
+ * config/pa/hpux11.mh (MH_CFLAGS): Add -Dvfork=fork.
+ * config/pa/hpux1020.mh (MH_CFLAGS): Add -Dvfork=fork.
+ Work-around for PR gdb/366.
+
+
+ * remote-e7000.c (write_small, e7000_read_inferior_memory,
+ e7000_read_inferior_memory_large, e7000_insert_breakpoint,
+ e7000_remove_breakpoint): Use paddr_nz() to print addresses.
+
+
+ * sh-tdep.c (sh_fp_frame_init_saved_regs,
+ sh_nofp_frame_init_saved_regs): Use alloca() for 'where'
+ information.
+
+
+ * MAINTAINERS (Misc): List Daniel Jacobowitz as the GDBSERVER
+ maintainer.
+
+
+ * README (Reporting Bugs in GDB): Document the bug web page as the
+ prefered way of submitting bugs.
+ Fix PR gdb/402.
+
+
+ * gdbarch.sh (FP_REGNUM, PC_REGNUM, SP_REGNUM): Allow default of
+ -1. Update comment.
+ * gdbarch.h, gdbarch.c: Re-generate.
+
+
+ * m68klinux-nat.c (fill_fpregset): Properly pass address of
+ buffer to regcache_collect.
+
+
+ * gdbarch.sh (PS_REGNUM): Add. Document. Default to -1.
+ * gdbarch.c, gdbarch.h: Re-generate.
+
+
+ * symtab.c (lookup_symtab): Remove ``const'' from ``rp''
+ declaration. Fix -Werror.
+
+
+ * gdbarch.sh (initialize_non_multiarch): Call init_gdbarch_swap.
+ * gdbarch.c: Regenerate.
+
+
+ * cli/cli-dump.c (restore_section_callback): Use paddr_nz.
+
+
+ * solib-svr4.c (bkpt_names): Add "__start".
+
+
+ * sparc-tdep.c (sparc_push_dummy_frame): Use GDB_TARGET_IS_SPARC64
+ as test for 64 bit target.
+
+
+ * h8500-tdep.c (h8500_write_fp): Delete function.
+ * dwarf2cfi.c (cfi_write_fp): Document as not used.
+ * mips-tdep.c (mips_gdbarch_init): Do not set write_fp.
+ * ia64-tdep.c (ia64_gdbarch_init): Do not set write_fp.
+ * m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set write_fp.
+ * rs6000-tdep.c (rs6000_gdbarch_init): Do not set write_fp.
+ * s390-tdep.c (s390_gdbarch_init): Do not set write_fp.
+ (s390_write_fp):
+ * sh-tdep.c (sh_gdbarch_init): Do not set write_fp.
+ * x86-64-tdep.c (i386_gdbarch_init): Do not set write_fp.
+ * d10v-tdep.c (d10v_gdbarch_init): Do not set write_fp.
+ (d10v_write_fp): Delete function.
+ * inferior.h (write_fp, generic_target_write_fp): Delete
+ declarations.
+ * regcache.c (generic_target_write_fp): Delete function.
+ (write_fp): Delete function.
+ * gdbarch.sh (TARGET_WRITE_FP): Delete.
+ * gdbarch.h, gdbarch.c: Regenerate.
+ * config/v850/tm-v850.h (TARGET_WRITE_FP): Delete macro.
+ * config/sparc/tm-sp64.h (TARGET_WRITE_FP): Delete macro.
+ (sparc64_write_fp): Delete declaration.
+ * config/h8500/tm-h8500.h (TARGET_WRITE_FP): Delete macro.
+ (h8500_write_fp): Delete declaration.
+
+
+ * sparc-tdep.c (sparc64_write_fp): Delete.
+ (sparc_push_dummy_frame): Replace write_fp call with code to store
+ the FP directly.
+ (sparc_gdbarch_init): Do not initialize write_fp.
+
+
+ * rs6000-tdep.c (skip_prologue): Eliminate unused/unreachable
+ clause.
+
+
+ * stack.c (get_selected_block): Add new argument `addr_in_block',
+ used to return the exact code address we used to select the block,
+ not just the block.
+ * blockframe.c (get_frame_block, get_current_block): Same.
+ * frame.h (get_frame_block, get_current_block,
+ get_selected_block): Update declarations.
+ * linespec.c, stack.c, blockframe.c, breakpoint.c, findvar.c,
+ linespec.c, varobj.c, printcmd.c, symtab.c: Callers changed.
+
+
+ * breakpoint.c (insert_breakpoints): Change 'hw' to 'hardware in
+ warning message.
+
+
+ * utils.c (xfullpath): New function.
+ * defs.h (xfullpath): Add declaration.
+ * source.c (openp): Use xfullpath in place of gdb_realpath to
+ avoid resolving the basename part of filenames when the
+ associated file is a symbolic link. This fixes a potential
+ inconsistency between the filenames known to GDB and the
+ filenames it prints in the annotations.
+ * symtab.c (lookup_symtab): Use the new xfullpath function, in order
+ to be able to match a filename with either the real filename, or
+ the name of any symbolic link to this file.
+ (lookup_partial_symtab): Ditto.
+
+
+ * breakpoint.c: Add support for hardware breakpoints in overlays.
+ (overlay_events_enabled): New state variable.
+ (insert_breakpoints): Use overlay_events_enabled to decide
+ whether to attempt to set a breakpoint at the overlay load addr.
+ Handle bp_hardware_breakpoint as well as bp_breakpoint.
+ (remove_breakpoint): Use overlay_events_enabled to decide
+ whether breakpoints need to be removed from overlay load addr.
+ Handle bp_hardware_breakpoint as well as bp_breakpoint.
+ (bpstat_stop_status): Handle bp_hardware_breakpoint in overlays.
+ (create_overlay_event_breakpoint, enable_overlay_breakpoints,
+ disable_overlay_breakpoints): Update overlay_events_enabled.
+
+
+ * dwarf2read.c (struct function_range): New.
+ (cu_first_fn, cu_last_fn, cu_cached_fn): New.
+ (check_cu_functions): New.
+ (read_file_scope): Initialize global function lists.
+ Call dwarf_decode_line after processing children.
+ (read_func_scope): Add to global function list.
+ (dwarf_decode_lines): Call check_cu_functions everywhere
+ record_line is called. Call record_line with a linenumber
+ of 0 to mark sequence ends.
+
+
+ * x86-64-linux-nat.c (child_xfer_memory): x86-64 ptrace() ABI
+ change sync with glibc.
+
+
+ * configure.in: Call AC_C_INLINE.
+ * configure: Regenerated.
+
+
+ * rs6000-tdep.c: Change #include of "bfd/libcoff.h"
+ and "bfd/libbfd.h" to "libcoff.h" and "libbfd.h".
+
+ * NEWS: Mention gcore support on FreeBSD/i386.
+
+ * fbsd-proc.c: New file.
+ * config/i386/nm-fbsd.h (CHILD_PID_TO_EXEC_FILE): Define.
+ * config/i386/fbsd.mh (NATDEPFILES): Add gcore.o and fbsd-proc.o.
+
* lin-lwp.c (child_wait): Check SAVE_ERRNO instead of ERRNO in
while statement.
projects / binutils.git / blobdiff