srctrigger=as.c
srcname="gas"
need_bfd=no
-configdirs=doc
+bfd_gas=no
+configdirs="doc testsuite"
# per-host:
gas_host=generic
case "${host}" in
- a29k-*-* | rs6000-*-* | vax-*-*)
- case "${host_os}" in
- vms*) gas_host=vms ;;
- bsd*) gas_host=bsd ;;
- *) gas_host=${host_cpu} ;;
- esac
- ;;
- mips-dec-ultrix)
- gas_host=decstation
- ;;
- mips-*-bsd)
- gas_host=mipsbsd
- ;;
- i[34]86-ibm-aix*)
- gas_host=i386aix
- ;;
- i[34]86-*-isc*)
- gas_host=sysv
- ;;
- m68k-sun-sunos*)
- gas_host=sun3
- ;;
- i386-sun-sunos*)
- gas_host=sun386
- ;;
- sparc-sun-sunos*)
- gas_host=sun4
- ;;
- sparc-sun-solaris2*)
- gas_host=sysv
- ;;
+ a29k-*-*) gas_host=a29k ;;
+
+ alpha-*-osf*) gas_host=ansi ;;
+
+ hppa*-hp-hpux*) gas_host=hpux ;;
+ hppa*-hp-bsd*) gas_host=hppabsd ;;
+ hppa*-hp-osf*) gas_host=hppaosf ;;
+
+ i[34]86-ibm-aix*) gas_host=i386aix ;;
+ i[34]86-*-isc*) gas_host=sysv ;;
+ i386-sun-sunos*) gas_host=sun386 ;;
+
+ m68k-sun-sunos*) gas_host=sun3 ;;
+ m68*-*-hpux) gas_host=hpux ;;
+
+ mips-dec-ultrix*) gas_host=decstatn ;;
+ mips-*-bsd*) gas_host=mipsbsd ;;
+ mips-sgi-irix*) gas_host=irix ;;
+
+ rs6000-*-*) gas_host=rs6000 ;;
+
+ sparc-sun-sunos*) gas_host=sun4 ;;
+ sparc-sun-solaris2*) gas_host=sysv ;;
+
+ vax-*-vms*) gas_host=vms ;;
+ vax-*-bsd*) gas_host=vax ;;
+
*-*-ansi | *-*-ultrix | *-*-hpux | *-*-sysv*)
- gas_host=${host_os}
- ;;
+ gas_host=${host_os} ;;
+
esac
+if [ ! -r ${srcdir}/config/ho-${gas_host}.h ]; then
+ echo '*** GAS does not support host' ${host} 1>&2
+ exit 1
+fi
+
# per-target:
-# not yet...
case ${with_bfd_assembler} in
yes)
- echo "*** Warning: GAS BFD configuration option not yet supported" 1>&2
+ echo "*** Warning: GAS BFD configuration option not yet fully supported" 1>&2
need_bfd=yes
bfd_gas=yes
;;
no | "")
;;
*)
- echo "*** Bad value \"${with_bfd_assembler}\" for --with_bfd_assembler option" 1>&2
+ echo "*** Bad value \"${with_bfd_assembler}\" for --with-bfd-assembler option" 1>&2
exit 1
;;
esac
# assign cpu type
emulation=generic
-cpu_type=${target_cpu}
-
# check for architecture variants
case ${target_cpu} in
sparclite*) cpu_type=sparc ;;
- sparc64) cpu_type=sparc obj_format=aout ;;
+ sparc64) cpu_type=sparc64 obj_format=elf ;; # v9
m680[01234]0) cpu_type=m68k ;;
m683??) cpu_type=m68k ;;
+ i486) cpu_type=i386 ;;
+ h8300h) cpu_type=h8300 ;;
+ # Actually we've only got support for the 1.1, so we shouldn't generalize,
+ # but this is what the support files are named...
+ hppa1.1) cpu_type=hppa ;;
+ *) cpu_type=${target_cpu} ;;
esac
gas_target=${cpu_type}
+generic_target=${cpu_type}-${target_vendor}-${target_os}
+
# assign object format
-case ${target} in
- a29k-amd-udi)
- obj_format=coffbfd
- need_bfd=yes
- gas_target=ebmon29k
- ;;
- a29k-amd-ebmon)
- obj_format=coffbfd
- need_bfd=yes
- gas_target=ebmon29k
- ;;
- a29k-amd-ebmonold)
- obj_format=coff
- need_bfd=yes
- gas_target=ebmon29k
- ;;
- i[34]86-ibm-aix*)
- obj_format=coffbfd
- need_bfd=yes
- gas_target=i386coff
- emulation=i386aix
- ;;
- i[34]86-*-bsd*)
- obj_format=aout
- ;;
- i[34]86-*-coff | i[34]86-*-sysv* | i[34]86-*-sco* | i[34]86-*-isc*)
- obj_format=coffbfd
- need_bfd=yes
- gas_target=i386coff
- ;;
- i[34]86-*-go32)
- obj_format=aout
- ;;
- i960-wrs-vxworks)
- obj_format=bout
- ;;
- i960-*-coff)
- obj_format=coff
- emulation=ic960
- ;;
- m68k-wrs-vxworks)
- obj_format=aout
- emulation=sun3
- ;;
+case ${generic_target} in
+ a29k-amd-udi) obj_format=coffbfd gas_target=ebmon29k ;;
+ a29k-amd-ebmon) obj_format=coffbfd gas_target=ebmon29k ;;
+ a29k-amd-ebmonold) obj_format=coff gas_target=ebmon29k ;;
+
+ hppa-*-osf) obj_format=elf emulation=hppa ;;
+ hppa-*-hpux*) obj_format=som emulation=hppa ;;
+
+ h8300-*-coff) obj_format=coffbfd ;;
+
+ i386-ibm-aix*) obj_format=coffbfd gas_target=i386coff
+ emulation=i386aix ;;
+ i386-*-bsd*) obj_format=aout emulation=386bsd ;;
+ i386-*-linux*) obj_format=aout emulation=linux ;;
+ i386-*-lynxos* | i386-*-coff | i386-*-sysv* | i386-*-sco* | i386-*-isc*)
+ obj_format=coffbfd gas_target=i386coff ;;
+ i386-*-go32) obj_format=aout ;;
+
+ i960-wrs-vxworks) obj_format=bout ;;
+ i960-*-coff) obj_format=coff emulation=ic960 ;;
+
+ m68k-wrs-vxworks) obj_format=aout emulation=sun3 ;;
m68k-ericsson-[Oo][Ss][Ee])
- obj_format=aout
- emulation=sun3
- ;;
- m68k-*-coff)
- obj_format=coffbfd
- need_bfd=yes
- gas_target=m68kcoff
- ;;
- mips-*-bsd*)
- # don't change emulation like *-*-bsd does
- bfd_gas=yes
- obj_format=aout
- gas_target=mips-lit
- ;;
- mips-*-ultrix*)
- bfd_gas=yes
- obj_format=ecoff
- gas_target=mips-lit
- ;;
- mips-*-irix* | mips-*-ecoff)
- bfd_gas=yes
- obj_format=ecoff
- gas_target=mips-big
- ;;
- sparclite*-fujitsu-none)
- obj_format=aout
- ;;
+ obj_format=aout emulation=sun3 ;;
+ m68k-*-coff | m68*-*-sysv*)
+ obj_format=coffbfd gas_target=m68kcoff ;;
+ m68k-*-hpux) obj_format=hp300 emulation=hp300 ;;
+
+ m88k-*-coff*) obj_format=coffbfd gas_target=m88kcoff ;;
+
+ # don't change emulation like *-*-bsd does
+ mips-*-bsd*) bfd_gas=yes obj_format=aout gas_target=mips-lit ;;
+ mips-*-ultrix*) obj_format=ecoff gas_target=mips-lit ;;
+ mips-*-ecoffl*) obj_format=ecoff gas_target=mips-lit ;;
+ mips-*-ecoff*) obj_format=ecoff gas_target=mips-big ;;
+ mips-*-irix*) obj_format=ecoff gas_target=mips-big emulation=irix ;;
+
+ sparc*-*-sunos4*) bfd_gas=preferred obj_format=aout emulation=sun3 ;;
+
+ sparc*-fujitsu-none) obj_format=aout ;;
+
+ sparc64-*-aout*) obj_format=aout bfd_gas=yes ;; # v9
+
*-*-aout | *-*-scout | *-*-linux)
- obj_format=aout
- ;;
+ obj_format=aout ;;
*-*-bout* | *-*-nindy*)
- obj_format=bout
- ;;
- *-*-bsd* | *-*-sunos*)
- obj_format=aout
- emulation=sun3
- ;;
- *-*-generic)
- obj_format=generic
- ;;
- *-*-xray | *-*-hms)
- obj_format=coffbfd
- need_bfd=yes
- ;;
- *-*-sysv32)
- obj_format=coff
- emulation=sysv32
- ;;
- *-*-sim)
- obj_format=coffbfd
- need_bfd=yes
- ;;
+ obj_format=bout ;;
+ *-*-bsd* | *-*-sunos*)
+ obj_format=aout emulation=sun3 ;;
+ *-*-generic) obj_format=generic ;;
+ *-*-xray | *-*-hms) obj_format=coffbfd ;;
+ *-*-sysv32) obj_format=coff emulation=sysv32 ;;
+ *-*-sim) obj_format=coffbfd ;;
*-*-coff* | *-sysv* | *-*-sco*)
- obj_format=coff
- case ${target_vendor} in
- bull) emulation=dpx2 ;;
- sun) emulation=sun3 ;;
- esac
- ;;
- *-*-vxworks)
- obj_format=aout
- ;;
- *-*-coff)
- obj_format=coff
- ;;
+ obj_format=coff
+ case ${target_vendor} in
+ bull) emulation=dpx2 ;;
+ sun) emulation=sun3 ;;
+ esac
+ ;;
+ *-*-vxworks) obj_format=aout ;;
+ *-*-coff) obj_format=coff ;;
*-*-elf | *-*-solaris*)
- case ${bfd_gas} in
- yes) ;;
- *)
- echo "*** warning: gas ${target_os} configuration implies" 1>&2
- echo " (unsupported) --with-bfd-assembler option" 1>&2
- bfd_gas=yes
- ;;
- esac
- obj_format=elf
- ;;
- *-*-vms)
- obj_format=vms
- ;;
+ echo '*** Warning: GAS support for ELF format is incomplete' 1>&2
+ obj_format=elf ;;
+ *-*-vms) obj_format=vms ;;
esac
# assign floating point type
case ${target_cpu} in
- ns32k) atof=ns32k ;;
- vax) atof=vax ;;
- tahoe) atof=tahoe ;;
- *) atof=ieee ;;
+ ns32k | vax | tahoe ) atof=${target_cpu} ;;
+ *) atof=ieee ;;
esac
+if [ ! -r ${srcdir}/config/tc-${cpu_type}.c ]; then
+ echo '*** GAS does not support target CPU' ${cpu_type} 1>&2
+ exit 1
+fi
+
+if [ x${obj_format} = x ]; then
+ echo "*** GAS doesn't know what format to use for target" ${target} 1>&2
+ exit 1
+fi
+
+if [ ! -r ${srcdir}/config/obj-${obj_format}.c ]; then
+ echo '*** GAS does not have support for object file format' ${obj_format} 1>&2
+ exit 1
+fi
+
# and target makefile frag
target_makefile_frag=config/${gas_target}.mt
+case ${bfd_gas}-${obj_format} in
+ yes-coffbfd) obj_format=coff ;;
+ no-coffbfd) need_bfd=yes ;;
+ *-elf) bfd_gas=yes ;;
+ *-ecoff) bfd_gas=yes ;;
+ *) ;;
+esac
+
+case ${with_bfd_assembler}-${bfd_gas} in
+ yes-yes | no-no)
+ # We didn't override user's choice.
+ ;;
+ no-yes)
+ echo '*** Use of BFD is required for ${target}; overriding config options'\
+ 1>&2
+ ;;
+ no-preferred)
+ bfd_gas=no
+ ;;
+ *-preferred)
+ bfd_gas=yes
+ ;;
+ -*)
+ # User specified nothing.
+ ;;
+esac
+
files="config/ho-${gas_host}.h config/tc-${cpu_type}.c \
config/tc-${cpu_type}.h config/te-${emulation}.h \
config/obj-${obj_format}.h config/obj-${obj_format}.c \
case ${bfd_gas} in
yes)
- echo BFDDEF=-DBFD_ASSEMBLER >> Makefile
+ rm -f Makefile.tem
+ mv Makefile Makefile.tem
+ echo BFDDEF=-DBFD_ASSEMBLER > Makefile
+ cat Makefile.tem >> Makefile
+ rm -f Makefile.tem
need_bfd=yes
;;
*)
case ${need_bfd} in
yes)
- echo BFDLIB=../bfd/libbfd.a >> Makefile
+ rm -f Makefile.tem
+ mv Makefile Makefile.tem
+ echo BFDLIB=../bfd/libbfd.a > Makefile
+ cat Makefile.tem >> Makefile
+ rm -f Makefile.tem
;;
*)
;;
esac
+if [ x${host} != x${target} ] ; then
+ rm -f Makefile.tem
+ mv Makefile Makefile.tem
+ echo CROSS=-DCROSS_COMPILE > Makefile
+ cat Makefile.tem >> Makefile
+ rm -f Makefile.tem
+else
+ true
+fi
+
# end of gas/configure.in
projects / binutils.git / blobdiff