# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
# Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
m4_include([ltsugar.m4])
m4_include([ltversion.m4])
m4_include([lt~obsolete.m4])
+m4_include([config/isl.m4])
m4_include([config/cloog.m4])
AC_INIT(move-if-change)
# these libraries are used by various programs built for the host environment
#
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc isl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
target-libgloss \
target-newlib \
target-libgomp \
+ target-libatomic \
target-libitm \
target-libstdc++-v3 \
target-libmudflap \
esac
fi
+# Disable libatomic on unsupported systems.
+if test -d ${srcdir}/libatomic; then
+ if test x$enable_libatomic = x; then
+ AC_MSG_CHECKING([for libatomic support])
+ if (srcdir=${srcdir}/libatomic; \
+ . ${srcdir}/configure.tgt; \
+ test -n "$UNSUPPORTED")
+ then
+ AC_MSG_RESULT([no])
+ noconfigdirs="$noconfigdirs target-libatomic"
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ fi
+fi
+
# Disable libitm on unsupported systems.
if test -d ${srcdir}/libitm; then
if test x$enable_libitm = x; then
fi
fi
+# Disable libquadmath for some systems.
+case "${target}" in
+ # libquadmath is unused on AIX and libquadmath build process use of
+ # LD_LIBRARY_PATH can break AIX bootstrap.
+ powerpc-*-aix* | rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs target-libquadmath"
+ ;;
+esac
+
# Disable libssp for some systems.
case "${target}" in
avr-*-*)
noconfigdirs="$noconfigdirs target-libssp"
;;
rl78-*-*)
- # Dereferencing -1 is a compile-time error
+ # libssp uses a misaligned load to trigger a fault, but the RL78
+ # doesn't fault for those - instead, it gives a build-time error
+ # for explicit misaligned loads.
noconfigdirs="$noconfigdirs target-libssp"
;;
esac
tic54x-*-*)
noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
- cr16-*-*)
- noconfigdirs="$noconfigdirs gdb"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-mingw*)
host_makefile_frag="config/mh-mingw"
;;
- *-interix*)
- host_makefile_frag="config/mh-interix"
- ;;
hppa*-hp-hpux10*)
host_makefile_frag="config/mh-pa-hpux10"
;;
;;
esac
-# See if we are building gcc with C++.
-AC_ARG_ENABLE(build-with-cxx,
-[AS_HELP_STRING([--enable-build-with-cxx],
- [build with C++ compiler instead of C compiler])],
-ENABLE_BUILD_WITH_CXX=$enableval,
-ENABLE_BUILD_WITH_CXX=no)
-
-# Build stage1 with C and build stages 2 and 3 with C++.
-AC_ARG_ENABLE(build-poststage1-with-cxx,
-[AS_HELP_STRING([--enable-build-poststage1-with-cxx],
- [build stages 2 and 3 with C++, not C])],
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=$enableval,
-ENABLE_BUILD_POSTSTAGE1_WITH_CXX=yes)
-
# Used for setting $lt_cv_objdir
_LT_CHECK_OBJDIR
gmplibs="-L$with_mpfr_lib $gmplibs"
fi
if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then
- gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
- gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
- extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+ # MPFR v3.1.0 moved the sources into a src sub-directory.
+ if test -d ${srcdir}/mpfr/src; then
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr/src -I$$s/mpfr/src '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr/src --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/src/'"$lt_cv_objdir"
+ else
+ gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs"
+ gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc"
+ extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir"
+ fi
# Do not test the mpfr version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
+ extra_isl_gmp_configure_flags='--with-gmp-builddir=$$r/$(HOST_SUBDIR)/gmp'
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
# but it would be included on the link line in the version check below
AC_MSG_CHECKING([for the correct version of mpfr.h])
AC_TRY_COMPILE([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,0)
choke me
#endif
], [AC_TRY_COMPILE([#include <gmp.h>
# The library versions listed in the error message below should match
# the HARD-minimums enforced above.
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.4.0+ and MPC 0.8.0+.
Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify
their locations. Source code for these libraries can be found at
their respective hosting sites as well as at
AC_SUBST(extra_mpfr_configure_flags)
AC_SUBST(extra_mpc_gmp_configure_flags)
AC_SUBST(extra_mpc_mpfr_configure_flags)
+AC_SUBST(extra_isl_gmp_configure_flags)
# Allow host libstdc++ to be specified for static linking with PPL.
AC_ARG_WITH(host-libstdcxx,
fi])
AC_SUBST(poststage1_ldflags)
-# Check for PPL
-ppllibs=
-pplinc=
-pwllib=
-
-AC_ARG_WITH(ppl,
-[AS_HELP_STRING([--with-ppl=PATH],
- [specify prefix directory for the installed PPL package.
- Equivalent to --with-ppl-include=PATH/include
- plus --with-ppl-lib=PATH/lib])])
-AC_ARG_WITH(ppl-include,
-[AS_HELP_STRING([--with-ppl-include=PATH],
- [specify directory for installed PPL include files])])
-AC_ARG_WITH(ppl-lib,
-[AS_HELP_STRING([--with-ppl-lib=PATH],
- [specify directory for the installed PPL library])])
-
-AC_ARG_ENABLE(ppl-version-check,
-[AS_HELP_STRING([--disable-ppl-version-check],
- [disable check for PPL version])])
-
-case $with_ppl in
- yes | no | "")
- ;;
- *)
- ppllibs="-L$with_ppl/lib"
- pplinc="-I$with_ppl/include $pplinc"
- if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
- with_ppl=yes
- else
- AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
- fi
- ;;
-esac
-
-if test x"$with_ppl_include" != x; then
- pplinc="-I$with_ppl_include $pplinc"
- with_ppl=yes
-fi
-
-if test "x$with_ppl_lib" != x; then
- ppllibs="-L$with_ppl_lib"
- with_ppl=yes
-fi
-
-if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
- if test x"$enable_watchdog" = xyes; then
- pwllib="-lpwl"
- fi
- ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
- pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
- enable_ppl_version_check=no
- with_ppl=yes
-fi
-
-if test "x$with_ppl" != xno; then
- if test "x$pwllib" = x; then
- saved_LIBS="$LIBS"
- LIBS="$LIBS $ppllibs -lstdc++ -lm"
- AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
- LIBS="$saved_LIBS"
- fi
-
- ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+# Check for ISL
+dnl Provide configure switches and initialize islinc & isllibs
+dnl with user input.
+ISL_INIT_FLAGS
+if test "x$with_isl" != "xno"; then
+ dnl The minimal version of ISL required for Graphite.
+ ISL_CHECK_VERSION(0,10)
- if test "$enable_ppl_version_check" != no; then
- saved_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS $pplinc $gmpinc"
- AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
- AC_TRY_COMPILE([#include "ppl_c.h"],[
- #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
- choke me
- #endif
- ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
- CFLAGS="$saved_CFLAGS"
- fi
+ dnl Only execute fail-action, if ISL has been requested.
+ ISL_IF_FAILED([
+ AC_MSG_ERROR([Unable to find a usable ISL. See config.log for details.])])
fi
-# Flags needed for PPL
-AC_SUBST(ppllibs)
-AC_SUBST(pplinc)
-
-
# Check for CLOOG
-
dnl Provide configure switches and initialize clooginc & clooglibs
dnl with user input.
CLOOG_INIT_FLAGS
-if test "x$with_ppl" = "xno"; then
- dnl Only execute fail-action, if CLooG has been requested.
- CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
- if test "${graphite_requested}" = yes; then
- AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.])
- fi
- with_cloog=no
-fi
-if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
- && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then
- clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' '
- clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
-fi
-if test "x$with_cloog" != "xno"; then
+if test "x$isllibs" = x && test "x$islinc" = x; then
+ clooglibs=
+ clooginc=
+elif test "x$with_cloog" != "xno"; then
dnl The minimal version of CLooG required for Graphite.
dnl
dnl If we use CLooG-Legacy, the provided version information is
dnl ignored.
- CLOOG_CHECK_VERSION(0,16,1)
+ CLOOG_CHECK_VERSION(0,17,0)
dnl Only execute fail-action, if CLooG has been requested.
CLOOG_IF_FAILED([
AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
fi
+# If either the ISL or the CLooG check failed, disable builds of in-tree
+# variants of both
+if test "x$clooglibs" = x && test "x$clooginc" = x; then
+ noconfigdirs="$noconfigdirs cloog isl"
+fi
+
# Check for LTO support.
AC_ARG_ENABLE(lto,
[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
])
-# By default, C is the only stage 1 language.
+# By default, C and C++ are the only stage 1 languages.
stage1_languages=,c,
# Target libraries that we bootstrap.
;;
esac
- # If bootstrapping, then using --enable-build-with-cxx or
- # --enable-build-poststage1-with-cxx requires enabling C++.
- case ",$enable_languages,:,$ENABLE_BUILD_WITH_CXX,$ENABLE_BUILD_POSTSTAGE1_WITH_CXX,:$enable_bootstrap" in
- *,c++,*:*:*) ;;
- *:*,yes,*:yes)
+ # If bootstrapping, C++ must be enabled.
+ case ",$enable_languages,:$enable_bootstrap" in
+ *,c++,*:*) ;;
+ *:yes)
if test -f ${srcdir}/gcc/cp/config-lang.in; then
enable_languages="${enable_languages},c++"
else
- AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx or --enable-build-poststage1-with-cxx requires c++ sources])
+ AC_MSG_ERROR([bootstrapping requires c++ sources])
fi
;;
esac
fi
if test "$language" = "c++"; then
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" \
- || test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- boot_language=yes
- fi
+ boot_language=yes
fi
case ,${enable_languages}, in
*,${language},*)
- # Language was explicitly selected; include it.
- add_this_lang=yes
+ # Language was explicitly selected; include it
+ # unless it is C, which is enabled by default.
+ if test "$language" != "c"; then
+ add_this_lang=yes
+ fi
;;
*,all,*)
# 'all' was selected, select it if it is a default language
;;
esac
+# Disable libitm if we're not building C++
+case ,${enable_languages}, in
+ *,c++,*) ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libitm"
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
CFLAGS_FOR_TARGET=$CFLAGS
case " $CFLAGS " in
*" -O2 "*) ;;
- *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS_FOR_TARGET" ;;
esac
case " $CFLAGS " in
*" -g "* | *" -g3 "*) ;;
- *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS_FOR_TARGET" ;;
esac
fi
AC_SUBST(CFLAGS_FOR_TARGET)
CXXFLAGS_FOR_TARGET=$CXXFLAGS
case " $CXXFLAGS " in
*" -O2 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS_FOR_TARGET" ;;
esac
case " $CXXFLAGS " in
*" -g "* | *" -g3 "*) ;;
- *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS_FOR_TARGET" ;;
esac
fi
AC_SUBST(CXXFLAGS_FOR_TARGET)
extra_arflags_for_target=" -X32_64"
extra_nmflags_for_target=" -B -X32_64"
;;
- *-*-darwin[[3-9]]*)
- # ranlib before Darwin10 requires the -c flag to look at common symbols.
- extra_ranlibflags_for_target=" -c"
- ;;
esac
alphaieee_frag=/dev/null
changequote([,])
case $lib in
- mpc | mpfr | gmp | ppl | cloog)
+ mpc | mpfr | gmp | cloog)
# If we're processing --with-$lib, --with-$lib-include or
# --with-$lib-lib, for one of the libs above, and target is
# different from host, don't pass the current argument to any
esac ;;
esac
-# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
-if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then
- saved_CFLAGS="$CFLAGS"
-
- # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
- CFLAGS="$CFLAGS -fkeep-inline-functions"
- AC_MSG_CHECKING([whether -fkeep-inline-functions is supported])
- AC_TRY_COMPILE([
-#if (__GNUC__ < 3) \
- || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \
- || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1)))
-#error http://gcc.gnu.org/PR29382
-#endif
- ],,
- [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"],
- [AC_MSG_RESULT([no])])
-
- CFLAGS="$saved_CFLAGS"
-fi
-
AC_SUBST(stage1_cflags)
# Enable --enable-checking in stage1 of the compiler.
esac
AC_SUBST(stage2_werror_flag)
-# If using ENABLE_BUILD_POSTSTAGE1_WITH_CXX, pass
-# --enable-build-with-cxx after stage1.
-if test "$ENABLE_BUILD_POSTSTAGE1_WITH_CXX" = "yes"; then
- POSTSTAGE1_CONFIGURE_FLAGS=--enable-build-with-cxx
-else
- POSTSTAGE1_CONFIGURE_FLAGS=
-fi
-AC_SUBST(POSTSTAGE1_CONFIGURE_FLAGS)
-
# Specify what files to not compare during bootstrap.
compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*"
case "$target" in
hppa*64*-*-hpux*) ;;
hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;;
-esac
-case " $configdirs " in
-*" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;;
+ powerpc*-ibm-aix*) compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/* | *libgomp*\$(objext)" ;;
esac
AC_SUBST(compare_exclusions)
projects / binutils.git / blobdiff