Makefile=Makefile
Makefile_in=Makefile.in
norecurse=
+recursing=
removing=
srcdir=
srctrigger=
target=
targets=
+commontargets=
targetsubdir=
template=
verbose=
case ${arg} in
-ansi | +a*)
ansi=true
+ clib=clib
;;
-destdir=* | +destdir=* | +destdi=* | +destd=* | +dest=* | +des=* | +de=* | +d=*)
destdir=`echo ${arg} | sed 's/[+-]d[a-z]*=//'`
-norecurse | +no*)
norecurse=true
;;
+ -recursing)
+ recursing=true
+ ;;
-rm | +r*)
removing=${arg}
;;
-template=* | +template=* | +templat=* | +templa=* | +templ=* | +temp=* | +tem=* | +te=*)
template=`echo ${arg} | sed 's/[+-]template=//'`
;;
- -verbose | +v*)
+ -v | -verbose | +v*)
verbose=${arg}
;;
-* | +*)
if [ -n "${verbose}" ] ; then
echo `pwd`/configure $*
- echo targets=\"${targets}\"
fi
# process host and target only if not rebuilding configure itself or removing.
if [ -z "${hosts}" ] ; then
(echo ;
echo "configure: No HOST specified." ;
- echo) 2>&1
+ echo) 1>&2
fatal=true
fi
fi
srctrigger=libbfd.c
srcname="bfd"
-commontargets=true
## end of common part.
# are we rebuilding config itself?
if [ -n "${template}" ] ; then
if [ ! -r ${template} ] ; then
- echo "Can't find template ${template}."
+ echo '***' "Can't find template ${template}." 1>&2
exit 1
fi
if [ -r configure.in ] ; then
if [ -z "`grep '^# per\-host:' configure.in`" ] ; then
- echo `pwd`/configure.in has no "per-host:" line.
+ echo '***' `pwd`/configure.in has no "per-host:" line. 1>&2
exit 1
fi
if [ -z "`grep '^# per\-target:' configure.in`" ] ; then
- echo `pwd`/configure.in has no "per-target:" line.
+ echo '***' `pwd`/configure.in has no "per-target:" line. 1>&2
exit 1
fi
rm template.new
# mv configure configure.old
mv configure.new configure
- echo Rebuilt configure in `pwd`
+
+ if [ -n "${verbose}" ] ; then
+ echo Rebuilt configure in `pwd`
+ fi
+
+ # Now update config.sub from the template directory.
+ if echo "$template" | grep -s 'configure$' ; then
+ cp `echo "$template" | sed s/configure$/config.sub/` ./config.sub.new
+ # mv config.sub config.sub.old
+ mv config.sub.new config.sub
+
+ if [ -n "${verbose}" ] ; then
+ echo Rebuilt config.sub in `pwd`
+ fi
+ fi
if [ -z "${norecurse}" ] ; then
# If template is relative path, make it absolute for recursing.
(cd $i ;
./configure +template=${template} ${verbose})
else
- echo No configure script in `pwd`/$i
+ echo Warning: No configure script in `pwd`/$i
fi
else
- echo Warning: directory $i is missing.
+ if [ -n "${verbose}" ] ; then
+ echo Warning: directory $i is missing.
+ fi
fi
done
done
# some sanity checks on configure.in
if [ -z "${srctrigger}" ] ; then
- echo srctrigger not set in configure.in. `pwd` not configured.
+ echo Warning: srctrigger not set in configure.in. `pwd` not configured.
exit 1
fi
defaulttargets=true
fi
+ result=`/bin/sh ./config.sub ${host}`
+ host_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ host_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ host_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ host=${host_cpu}-${host_vendor}-${host_os}
host_makefile_frag=config/hmake-${host}
#### configure.in per-host parts come in here.
-if [ ! -f config/hmake-${host} ] ; then
- echo No such host available: ${host}
+if [ "${host_os}" = "posix" ] ; then
+ bfd_host=posix
+else
+ case "${host_cpu}" in
+ rs6000) bfd_host=aix ;;
+ mips)
+ case "${host_vendor}" in
+ dec) bfd_host=dec3100 ;;
+ esac
+ ;;
+ m88k)
+ case "${host_vendor}" in
+ *)
+ case "${host_os}" in
+ dgux) bfd_host=dgux ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ m68k)
+ case "${host_vendor}" in
+ hp)
+ case "${host_os}" in
+ hpux) bfd_host=hp9000 ;;
+ bsd) bfd_host=hp300bsd ;;
+ esac
+ ;;
+ sony) bfd_host=news ;;
+ sun) bfd_host=sun3 ;;
+ esac
+ ;;
+
+ i386)
+ case "${host_vendor}" in
+ *)
+ case "${host_os}" in
+ sysv) bfd_host=i386v ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ sparc)
+ case "${host_vendor}" in
+ sun) bfd_host=sun4 ;;
+ esac
+ ;;
+
+ rtpc) bfd_host=rtbsd ;;
+ tahoe | vax) bfd_host=${host_cpu} ;;
+ esac
+fi
+
+if [ ! -f config/hmake-${bfd_host} ] ; then
+ echo '***' BFD does not support host ${host}: no file config/hmake-${bfd_host}
exit 1
fi
-## end of per-host part.
+host_makefile_frag=config/hmake-${bfd_host}
+## end of per-host part.
for target in ${targets} ; do
- if [ -n "${verbose}" ] ; then
- echo " target=\"${target}\""
- fi
-
+ result=`/bin/sh ./config.sub ${target}`
+ target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+ target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+ target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+ target=${target_cpu}-${target_vendor}-${target_os}
target_makefile_frag=config/tmake-${target}
#### configure.in per-target parts come in here.
-if [ ! -f config/tmake-${target} ] ; then
- echo No such target available: ${target}
+case "${target_vendor}" in
+aout | coff | bout) bfd_target=${target_cpu}-${target_vendor} ;;
+sony) bfd_target=news ;;
+intel) bfd_target=${target_cpu}-coff ;;
+wrs)
+ case "${target_cpu}" in
+ i960) bfd_target=i960-bout ;;
+ m68k) bfd_target=m68k-aout ;;
+ esac
+ ;;
+sun)
+ case "${target_cpu}" in
+ m68k) bfd_target=m68k-aout ;;
+ sparc) bfd_target=sparc-aout ;;
+ esac
+ ;;
+dec)
+ case "${target_cpu}" in
+ mips) bfd_target=dec3100 ;;
+ esac
+ ;;
+hp)
+ case "${target_cpu}" in
+ m68k)
+ case "${target_os}" in
+ hpux) bfd_target=hp9000 ;;
+ bsd) bfd_target=hp300bsd ;;
+ esac
+ ;;
+ esac
+ ;;
+none)
+ case "${target_cpu}" in
+ i386) bfd_target=i386-coff ;;
+ esac
+ ;;
+*)
+ case "${target_cpu}" in
+ tahoe | vax) bfd_target=${target_cpu} ;;
+ esac
+ ;;
+esac
+
+if [ ! -f config/tmake-${bfd_target} ] ; then
+ echo '***' BFD does not support target ${target}: no file config/tmake-${bfd_target}
exit 1
fi
+target_makefile_fragment=config/tmake-${bfd_target}
+
files=
links=
## end of per-target part.
if [ -d "${hostsubdir}" ] ; then
rm -rf ${hostsubdir}/${targetsubdir}
- if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target-`" ] ; then
+ if [ -z "`(ls ${hostsubdir}) 2>&1 | grep Target- | grep -v Target-independent`" ] ; then
rm -rf ${hostsubdir}
fi
else
if [ -n "${subdirs}" ] ; then
# check for existing status before allowing forced subdirs.
if [ -f ${Makefile} ] ; then
- echo "${Makefile} already exists in source directory. `pwd` not configured."
+ echo '***' "${Makefile} already exists in source directory. `pwd` not configured." 1>&2
exit 1
fi
if [ ! -d ${hostsubdir} ] ; then mkdir ${hostsubdir} ; fi
cd ${hostsubdir}
- if [ ! -d ${targetsubdir} ] ; then mkdir ${targetsubdir} ; fi
+ if [ ! -d ${targetsubdir} ] ; then
+ if [ -z "${commontargets}" ] ; then
+ mkdir ${targetsubdir}
+ else
+ if [ ! -d Target-independent ] ; then
+ mkdir Target-independent
+ fi
+
+ ${symbolic_link} Target-independent ${targetsubdir}
+ fi # if target independent
+ fi # if no target dir yet
+
cd ${targetsubdir}
srcdir=../..
else
# if not subdir builds, then make sure none exist.
if [ -n "`(ls .) 2>&1 | grep Host-`" ] ; then
- echo "Configured subdirs exist. `pwd` not configured."
+ echo '***' "Configured subdirs exist. `pwd` not configured." 1>&2
exit 1
fi
fi
if [ -n "${srctrigger}" -a ! -r ${srcdir}/${srctrigger} ] ; then
if [ -z "${srcdirdefaulted}" ] ; then
- echo "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
+ echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/${srcdir}" 1>&2
else
- echo "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
+ echo '***' "${progname}: Can't find ${srcname} sources in `pwd`/. or `pwd`/.." 1>&2
fi
- echo \(At least ${srctrigger} is missing.\) 1>&2
+ echo '***' \(At least ${srctrigger} is missing.\) 1>&2
exit 1
fi
set ${links}; link=$1; shift; links=$*
if [ ! -r ${srcdir}/${file} ] ; then
- echo "${progname}: cannot create a link \"${link}\"," 1>&2
- echo "since the file \"${file}\" does not exist." 1>&2
+ echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
+ echo '***' "since the file \"${file}\" does not exist." 1>&2
exit 1
fi
${symbolic_link} ${srcdir}/${file} ${link} 2>/dev/null || ${hard_link} ${srcdir}/${file} ${link}
if [ ! -r ${link} ] ; then
- echo "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
+ echo '***' "${progname}: unable to link \"${link}\" to \"${srcdir}/${file}\"." 1>&2
exit 1
fi
- echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+
+ if [ -n "${verbose}" ] ; then
+ echo "Linked \"${link}\" to \"${srcdir}/${file}\"."
+ fi
done
# Create a .gdbinit file which runs the one in srcdir
andusing=${using}
fi
- echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+ if [ -n "${verbose}" -o -z "${recursing}" ] ; then
+ echo "Created \"${Makefile}\"" in `pwd`${andusing}.
+ fi
#### configure.in post-target parts come in here.
originaldir=`pwd`
cd ${srcdir}
fi
+
+ # If there are subdirectories, then recurse.
+ if [ -z "${norecurse}" -a -n "${configdirs}" ] ; then
+ for configdir in ${configdirs} ; do
+ if [ -n "${verbose}" ] ; then
+ echo Configuring ${configdir}...
+ fi
+
+ if [ -d ${configdir} ] ; then
+ (cd ${configdir} ;
+ ./configure -recursing ${host} +target=${target} \
+ ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
+ | sed 's/^/ /'
+ else
+ if [ -n "${verbose}" ] ; then
+ echo Warning: directory \"${configdir}\" is missing.
+ fi
+ fi
+ done
+ fi
done # for each target
# Now build a Makefile for this host.
fi
done # for each host
-# If there are subdirectories, then recurse.
-
-if [ -n "${norecurse}" -o -z "${configdirs}" ] ; then exit 0 ; fi
-
-# configdirs is not null
-for configdir in ${configdirs} ; do
- echo Configuring ${configdir}...
- specifics=
- commons=
-
- if [ -n "${defaulttargets}" ] ; then
- for host in ${hosts} ; do
- if [ -d ${configdir}.${host} ] ; then
- newspecifics="${specifics} ${host}"
- specifics=${newspecifics}
- else
- newcommons="${commons} ${host}"
- commons=${newcommons}
- fi # if target specific
- done # for each host
-
- if [ -n "${commons}" ] ; then
- if [ -d ${configdir} ] ; then
- (cd ${configdir} ;
- ./configure ${commons} ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
- | sed 's/^/ /'
- else
- echo Warning: directory \"${configdir}\" is missing.
- fi
- fi # if any common hosts
-
- if [ -n "${specifics}" ] ; then
- for host in ${specifics} ; do
- echo Configuring target specific directory ${configdir}.${host}...
- (cd ${configdir}.${host} ;
- ./configure ${host} ${verbose} ${subdirs} ${removing} +destdir=${destdir}) \
- | sed 's/^/ /'
- done # for host in specifics
- fi # if there are any specifics
- else
-
- for target in ${targets} ; do
- if [ -d ${configdir}.${target} ] ; then
- newspecifics="${specifics} ${target}"
- specifics=${newspecifics}
- else
- newcommons="${commons} +target=${target}"
- commons=${newcommons}
- fi
-
- done # check for target specific dir override
-
- if [ -n "${verbose}" ] ; then
- echo " "commons=\"${commons}\"
- echo " "specifics=\"${specifics}\"
- fi # if verbose
-
- if [ -n "${commons}" ] ; then
- if [ -d ${configdir} ] ; then
- (cd ${configdir} ;
- ./configure ${hosts} ${verbose} ${subdirs} ${removing} \
- ${commons} +destdir=${destdir}) \
- | sed 's/^/ /'
- else
- echo Warning: directory \"${configdir}\" is missing.
- fi
- fi # if any commons
-
- if [ -n "${specifics}" ] ; then
- for target in ${specifics} ; do
- echo Configuring target specific directory ${configdir}.${target}...
- (cd ${configdir}.${target} ;
- ./configure ${hosts} ${verbose} ${subdirs} ${removing} \
- "+target=${target}" +destdir=${destdir}) \
- | sed 's/^/ /'
- done
- fi # if any specifics
- fi # not default targets
-done
-
exit 0
#
# $Log$
-# Revision 1.19 1991/08/14 22:10:10 rich
-# Added fatal checks for missing host and target makefile fragments.
+# Revision 1.23 1991/08/23 04:48:43 rich
+# Minor config polish.
+#
+# Revision 1.22 1991/08/23 03:31:43 rich
+# Minor polish & config mapping.
+#
+# Revision 1.30 1991/08/22 07:15:51 rich
+# Three part names, etc.
+#
+# Revision 1.29 1991/08/20 04:56:51 rich
+# revisiting error messages
+#
+# Revision 1.28 1991/08/16 19:22:17 rich
+# This is the commontargets change and should be considered
+# experimental.
#
-# Revision 1.18 1991/08/08 01:11:33 rich
+# Revision 1.27 1991/08/08 01:14:13 rich
# allow +f to stand in for +subdirs
#
# Revision 1.26 1991/08/07 19:21:32 rich
projects / binutils.git / blobdiff