+
+ * nm.c (print_symdef_entry): Call print_symname to print the
+ symbol name, so that --demangle works.
+
+ * Makefile.in (mostlyclean): Remove tmpdir.
+
+ * objcopy.c (struct section_list): Add fields used, adjust, val.
+ (adjust_start, set_start_set, set_start): New static variables.
+ (adjust_section_vma, adjust_sections): New static variables.
+ (copy_options): Add --adjust-start, --adjust-vma,
+ --adjust-section-vma, --adjust-warnings, --no-adjust-warnings,
+ --set-start.
+ (parse_vma): New static function.
+ (copy_usage): Mention new options.
+ (copy_object): Handle --set-start and --adjust-start.
+ (setup_section): Correct type of last argument to PTR. Set used
+ field if section is removed. Handle --adjust-vma and
+ --adjust-section-vma.
+ (copy_section): Correct type of last argument to PTR.
+ (mark_symbols_used_in_relocations): Likewise.
+ (strip_main): Clear used field when handling -R.
+ (copy_main): Handle new options.
+ * binutils.texi (objcopy): Document new options.
+ * objcopy.1: Document new options.
+
+
+ * configure.in (configdirs): Remove definition--testsuite is no
+ longer configured.
+ * Makefile.in (testsuite): Remove target.
+ (site.exp): New target.
+ (check): Rewrite.
+ (clean, distclean): Don't recur into testsuite directory.
+
+
+ * Makefile.in (VERSION): Updated to 2.5.
+ * Version 2.5 released.
+
+
+ * Makefile.in (sysdump.o): Depends upon sysroff.c.
+
+
+ * nlmconv.c (link_inputs): Pass -Ur flag to ld so that the
+ ctor/dtor tables needed by C++ programs are built.
+
+
+ * Makefile.in (srconv.o): Add dependence on sysroff.c.
+
+
+ * configure.in: Use ${config_shell} when running config.bfd.
+
+ * Makefile.in (sysroff.h): Split target away from sysroff.c.
+ (srconv.o, sysdump.o): New targets.
+ (srconv, sysdump): Don't depend upon sysroff.c.
+
+
+ * Makefile.in (arparse.c): Don't ignore errors from mv.
+ (sysinfo.c): Likewise. Also, depend upon arparse.c, to prevent a
+ parallel make from trying to build both arparse.c and sysinfo.c
+ simultaneously.
+ (nlmheader.c): Similar change.
+ (arparse.h): Separate target from arparse.c, so that a parallel
+ make does not try to build both at once. Depend upon arparse.c.
+ (sysinfo.h): Similar change.
+
+ * objdump.c (disassemble_data): Pass the reloc buffer to free, not
+ the pointer used to loop over the relocs.
+
+
+ * objdump.c (disassemble_data): Cast result of xmalloc.
+
+
+ * objdump.c (sorted_syms, sorted_symcount): New global variables.
+ (objdump_print_address): Use sorted_syms and sorted_symcount
+ instead of syms and symcount.
+ (disassemble_data): Don't bother to get the relocs before looping
+ over the sections. Before filtering and sorting the symbol table,
+ copy it into sorted_syms.
+
+
+ * objdump.c (struct objdump_disasm_info): Add field require_sec.
+ (objdump_print_address): If aux->require_sec, require that the
+ symbol be in aux->sec even if HAS_RELOC is not set. If we can't
+ find a smaller symbol in the right section, look for a larger one.
+ (disassemble_data): Set aux.require_sec around the
+ objdump_print_address call for the instruction address.
+
+
+ * ar.c: Call xexit rather than exit.
+ (output_filename, output_file, output_bfd): New static variables.
+ (remove_output): New static function.
+ (main): Call xatexit (remove_output). Call xexit rather than
+ returning.
+ (extract_file): Set output_filename and output_file while output
+ file is open.
+ (write_archive): Likewise, but use output_bfd, not output_file.
+ * arsup.c: Include libiberty.h. Call xexit rather than exit.
+ * bucomm.c: Likewise.
+
+ * objdump.c (disassemble_all): New global variable.
+ (usage): Document --disassemble-all.
+ (long_options): Add disassemble-all as a synonym for -D.
+ (compare_symbols): Make pointers const.
+ (compare_relocs): New static function.
+ (disassemble_data): Rename disassemble to disassemble_fn to avoid
+ shadowing. If dump_reloc_info, print relocs along with
+ disassembly. Skip sections which are not SEC_CODE unless
+ disassemble_all or only is set.
+ (display_bfd): Don't call dump_relocs if disassemble is set.
+ (main): Accept and handle -D.
+ * binutils.texi: Document -D/--disassemble-all.
+ * objdump.1: Likewise.
+
+
+ * objdump.c (disassemble_data): Initialize prevline to 0. Make
+ prev_function non const. Copy functionname into an malloc buffer
+ when setting prev_function, instead of assuming that the string
+ will last forever.
+
+ * nm.c: Include libiberty.h.
+ (sort_by_size): New static variable.
+ (long_options): Add --size-sort.
+ (usage): Mention --size-sort.
+ (numeric_forward): Make static. Change from void * to PTR.
+ (numeric_reverse): Likewise.
+ (non_numeric_forward, non_numeric_reverse): Likewise.
+ (sorters): Change declaration from void * to PTR.
+ (size_forward, sort_symbol_by_size): New static functions.
+ (display_rel_file): Handle sort_by_size.
+ (filter_symbols): If sort_by_size, discard absolute and undefined
+ symbols.
+ * binutils.texi (nm): Document --size-sort.
+ * nm.1: Document --size-sort.
+
+
+ * objcopy.c (copy_main): Initialize input_filename and
+ output_filename to NULL.
+
+
+ * Makefile.in (version.o): Depend upon Makefile, so that version.o
+ gets rebuilt when make variable VERSION is changed.
+
+ * objdump.c (dump_section_header): Print the SEC_NEVER_LOAD flag.
+
+
+ * configure.in: Change i[34]86 to i[345]86.
+
+
+ * ar.c (ranlib_touch): Don't update the archive map if there isn't
+ one.
+
+
+ * ar.c: Include libiberty.h.
+ (inarch): Remove variable.
+ (map_over_members): Make static. Add arch argument, and use it
+ instead of inarch. Change all callers.
+ (main): Treat --version as -v. Accept -t argument. Accept any
+ number of archive arguments. Catch and use open_inarch return
+ value, rather than using inarch.
+ (open_inarch): Return newly opened BFD, rather than using inarch.
+ (do_quick_append): Make archive_filename const.
+ (write_archive): Add iarch argument, and use it instead of inarch.
+ Change all callers.
+ (delete_members, move_members, replace_members): Likewise.
+ (ranlib_only): Don't exit on success. Catch and use open_inarch
+ return value.
+ (ranlib_touch): New function.
+ * arsup.h (map_over_members): Don't declare.
+ (ar_end, ar_extract): Declare.
+ (open_inarch): Change return value in declaration to bfd *.
+ * arsup.c (map_over_list): Make static. Always pass two arguments
+ to function. Add arch argument, and use it instead of inarch.
+ Change all callers.
+ (ar_directory_doer): Make static. Add ignored second argument.
+ Change all callers.
+ (ar_directory): Use open_inarch return value rather than inarch.
+ (ar_addlib_doer): Make static.
+ (ar_addlib): Use open_inarch return value rather than inarch.
+ (ar_extract): Remove unused local variable abfd.
+
+
+ Add support for removing named sections to objcopy and strip.
+ * objcopy.c (struct section_list): Define.
+ (remove_sections): New static variable.
+ (strip_options, copy_options): Add remove-section.
+ (copy_usage, strip_usage): Mention -R and --remove-section.
+ (setup_section): If section is in remove_sections list, ignore it.
+ (copy_section): Likewise.
+ (strip_main, copy_main): Handle -R.
+ * binutils.texi, objcopy.1, strip.1: Document new options.
+
+
+ * nlmconv.c (powerpc_mangle_relocs): Rename symvalue to sym_value,
+ so as not to conflict with the symvalue typedef in bfd.h.
+
+
+ * nlmheader.y: Per current NetWare docs, accept a revision number
+ of 0 and treat a revision number greater than 26 as 0.
+
+
+ * objdump.c (objdump_print_address): Correct handling of end of
+ symbols when looking for next symbol with a different value.
+
+
+ * nm.c (numeric_forward): Treat undefined symbols as "less than"
+ defined symbols with zero values. If numeric values are equal, or
+ both symbols are undefined, sort alphabetically. Don't assume
+ that the difference of two bfd_vma values will truncate to "int"
+ and still have the same sign.
+ (numeric_reverse): Call numeric_forward and negate the result.
+ (print_symbol_info_bsd): For undefined symbols, print leading
+ spaces equivalent to the width of a printed bfd_vma, rather than
+ assuming that 8 will look right.
+
+
+ * coffgrok.c (doit): Zero all fields of new structure.
+ * srconv.c (sysroff_swap_*_out): Remove redundant trailing arg.
+ * sysinfo.y: Generate sysroff_swap_*_out without requiring extra
+ arg.
+
+
+ * nlmheader.y: Make "stack" and "stacksize" synonyms in the lexer
+ rather than the parser.
+
+
+ * config/mh-alphaosf, config/mh-apollo68v, config/mh-delta88:
+ Remove; obsolete.
+
+
+ * objdump.c (slurp_dynamic_symtab): Try to get the dynamic symbols
+ even if the bfd is not marked DYNAMIC. ELF executables are not
+ marked DYNAMIC, but do have dynamic symbols.
+
+
+ * coffgrok.c (do_where): Make data with no type 'int'.
+ (do_define): Keep info on source file of a symbol.
+ * coffgrok.h (coff_symbol): New field.
+ * srconv.c (PROGRAM_VERSION): Now 1.3
+ (wr_rl): Use external ref number for symbol.
+ (wr_dus): Only keep one source file per debug unit.
+ (wr_dln): Always emit line numbers for first source file,
+ (wr_globals): Emit globals in the du of their owning source file.
+
+
+ * nlmheader.y: Null terminate var_hdr->threadName.
+
+
+ * Makefile.in (syslex.o, sysinfo.o): Permit C source files to be
+ in $(srcdir), as they will be for FSF releases.
+
+
+ * nlmconv.c (setup_sections): Preserve existing section flags when
+ copying in flags from a new section.
+
+
+ * objcopy.c: Include libiberty.h.
+ (copy_file): If output_target is NULL, set it to the target of the
+ input file.
+
+
+ * nlmconv.c (link_inputs): Fixed memory allocation bug.
+
+
+ * configure.in: Change --with-targets to --enable-targets.
+
+
+ * Makefile.in (sysinfo): Does not depend upon $(ADDL_LIBS).
+
+ * nlmconv.c (powerpc_build_stubs): Don't generate the PowerPC
+ NetWare custom header; no longer needed.
+ (powerpc_mangle_relocs): Convert relocs against the uninitialized
+ data section into relocs against the data section.
+
+ * configure.in: Set nlmconv_defs to -DNLMCONV_cputype for all the
+ netware targets. Write it into Makefile as NLMCONV_DEFS.
+ * Makefile.in (nlmconv.o): Pass $(NLMCONV_DEFS) to $(CC).
+ * nlmconv.c: Only compile code for specific CPU types if
+ NLMCONV_cputype is defined.
+
+ * nlmconv.c (main): Change uses of bfd_abs_section, etc., to use
+ bfd_abs_section_ptr or bfd_is_abs_section, etc.
+ (i386_mangle_relocs, alpha_mangle_relocs): Likewise.
+ (powerpc_build_stubs): Likewise.
+ * nm.c (filter_symbols, print_symbols): Likewise.
+ * objcopy.c (filter_symbols): Likewise.
+ (mark_symbols_used_in_relocations): Likewise.
+ * objdump.c (remove_useless_symbols, dump_relocs): Likewise.
+ * size.c (sysv_internal_printer): Likewise.
+
+
+ * Makefile.in (MANPAGES): Remove $(DEMANGLER_PROG).
+ (install): Install it explicitly, from build dir, not srcdir.
+
+
+ * objdump.c: Don't include elf/internal.h.
+ (bfd_elf_find_section): Don't declare.
+ (read_section_stabs): No special handling for ELF. Always read
+ using BFD sections.
+
+
+ * configure.in: Set UNDERSCORE in Makefile based on result of
+ invoking config.bfd with a second argument of ``_''.
+ * Makefile.in (underscore.c): Depend upon Makefile. Don't try to
+ run $(CC) and $(NM), just use $(UNDERSCORE). Create via temporary
+ file.
+ (demangle.o): Remove target.
+ ($(NM_PROG)): Don't depend upon demangle.o, and don't link against
+ demangle.o. It's in libiberty anyhow.
+ (cplus-dem.o): Don't depend upon demangle.o.
+ * binutils.texi: Mention -n and --no-strip-underscores arguments
+ to c++filt.
+
+
+ * nm.c (long_options): Add --no-demangle to turn off --demangle,
+ and --no-cplus for Linux compatibility.
+ (usage): Mention --no-demangle.
+ * binutils.texi: Document --no-demangle.
+
+
+ * nm.c: HOST_64_BIT was renamed to BFD_HOST_64_BIT.
+
+ * objcopy.c (copy_archive): Make the temporary directory in the
+ same directory as the output BFD, since we may not have write
+ permission on the current directory. Set the permissions of the
+ new directory to 0700, not 0777.
+
+
+ * configure.in: if this is an rs6000 (and we're not building for
+ any other bfd targets) then build only nm (collect needs it on
+ rs6000-lynx).
+
+ * Makefile.in: define TOOL_PROGS which the list of programes to
+ install in $tooldir -- replaces a hard-coded list.
+
+
+ * objdump.c (display_target_list): Remove unused local ok.
+
+
+ * config/mh-alphaosf (CFLAGS): Don't specify both -g and -O;
+ they're not compatible under native cc. Use -O1 instead.
+
+ * Makefile.in (VERSION): Updated to cygnus-2.4.1.
+
+ Changes from binutils-2.4 net release:
+
+ * Makefile.in (MANPAGES): Use $(DEMANGLER_PROG).
+ ($(DEMANGLER_PROG).1): Build from cxxfilt.man, using sed.
+ * cxxfilt.man: Renamed from c++filt.1, replaced "c++filt" with
+ magic token to be replaced by sed.
+
+
+ * configure.bat: update for latest makefile.in
+
+
+ * bucomm.c: Check ANSI_PROTOTYPES rather than __STDC__.
+
+
+ * objcopy.c (copy_section): Set section size correctly if using
+ interleave.
+
+
+ * Makefile.in: Add rule for sysinfo.h
+
+
+ * Makefile.in (SRCONV_PROG): Define.
+ (PROGS): Use $(SRCONV_PROG) too.
+
+
+ * Makefile.in (DISTSTUFF): Add sysinfo.c, syslex.c, in case
+ someone configures with `targets=all'.
+ (distclean): Remove y.*.
+ (syslex.o): Depend on sysinfo.h.
+ (sysinfo.c): Rename y.tab.h to sysinfo.h.
+ (install-info): Don't try to install into $(infodir)/$(srcdir).
+ * syslex.l: Include sysinfo.h, not y.tab.h.
+
+
+ * syslex.l (yywrap): Define as function if not defined as a macro.
+
+ * Makefile.in (objdump.o): Deleted special rule.
+ * configure.in: Don't bother building ARCHDEFS variable for
+ Makefile.
+ * objdump.c (ARCH_*): Deleted handling.
+ (disassemble_data): Call `disassembler' from opcodes library.
+
+
+ * Makefile.in (install): Correct handling of $(tooldir) and
+ $(bindir) being on different devices.
+
+
+ * sysdump.c (h8300, sh): Add declarations.
+
+
+ * Makefile.in (syslex, sysinfo): Use CC_FOR_BUILD.
+ * coffdump.c, coffgroc.c, coffgrog.h, srconv.c, sysdump.c,
+ sysroff.info: Major changes.
+
+
+ * objdump.c (print_section_stabs): Indicate the stab header symbol
+ more clearly, print numbers of unrecognized stab n_type values.
+
+
+ * nlmconv.c (copy_sections): Copy arelent pointers, not arelents.
+
+
+ * Makefile.in (distclean): Remove $(PROGS) and underscore.c.
+
+
+ * nlmconv.c (setup_sections): Remove special handling of .reginfo
+ section.
+ (copy_sections): Likewise.
+ (alpha_mangle_relocs): Use bfd_ecoff_get_gp_value rather than the
+ special ECOFF .reginfo section.
+
+ * objcopy.c (copy_object): Call bfd_copy_private_bfd_data after
+ copying everything else, to let it fiddle with the file in its
+ final state.
+
+ * objdump.c: Include libiberty.h.
+ (display_target_list): If a format fails, just go on to the next
+ one. Check return value of bfd_set_format.
+ (display_info_table): Likewise. Don't increment loop variable in
+ for loop test, since that skips the first element.
+ (display_target_tables): Rewrite loop for clarity. Ensure that it
+ always prints at least one element.
+
+ * nlmconv.c (main): Use CyGnUsEx rather than CyGnUsSeCs for
+ sections header. Rename from cygnus_sections to cygnus_ext.
+
+
+ * objdump.c (_DUMMY_NAME_): Don't define.
+ (display_target_list): Use tmpnam to get a file name rather than
+ using _DUMMY_NAME_. Unlink it when done.
+ (display_info_table): Likewise.
+
+ * nlmconv.c (secsec): New static variable.
+ (main): Create .nlmsections section in output BFD. Store
+ information about it in sections header.
+ (setup_sections): Allocate space in sections header.
+ (copy_sections): Copy zero sized sections. Put information about
+ each section in the sections header.
+
+
+ * nlmconv.c (powerpc_build_stubs): Take new outbfd argument.
+ Change caller. Create custom header for new PowerPC NetWare
+ format.
+
+ * Makefile.in (nlmheader.o, nlmconv.o): Update dependencies.
+ * nlmconv.c: Include bfd.h and libiberty.h with "", not <>.
+ * nlmheader.y: Include bfd.h with "", not <>.
+
+
+ * objdump.c: Do an ifdef on __GO32__, not unix.
+
+
+ Added -D (--dynamic) option to nm and -T (--dynamic-syms) and -R
+ (--dynamic-reloc) arguments to objdump.
+ * nm.c (dynamic): New static variable.
+ (long_options): Added "dynamic".
+ (usage): Mention -D and --dynamic.
+ (main): Add D to getopt string. Handle -D by setting dynamic.
+ (display_rel_file): If dynamic is non-zero, read dynamic symbols
+ rather than normal symbols.
+ * nm.1: Updated for -D (--dynamic) option.
+ * objdump.c (dump_dynamic_symtab): New global variable.
+ (dump_dynamic_reloc_info): New global variable.
+ (dynsyms, dynsymcount): New global variables.
+ (usage): Mention -R, -T, --dynamic-syms and --dynamic-reloc.
+ (long_options): Added "dynamic-reloc" and "dynamic-syms".
+ (slurp_symtab): If no symbols, return rather than exit.
+ (slurp_dynamic_symtab): New function.
+ (display_bfd): Handle dump_dynamic_symtab and
+ dump_dynamic_reloc_info.
+ (dump_symbols): Take new dynamic argument, indicating whether to
+ display dynamic symbols.
+ (dump_relocs): Move most printing into dump_reloc_set.
+ (dump_dynamic_relocs): New function.
+ (dump_reloc_set): New function, extracted from dump_relocs.
+ (main): Add R and T to getopt string. Handle -T by setting
+ dump_dynamic_symtab and -R by setting dump_dynamic_reloc_info.
+ * objdump.1: Updated for -R (--dynamic-reloc) and -T
+ (--dynamic-syms) options.
+ * binutils.texi: Updated for new nm and objdump options.
+
+
+ Update for recent BFD changes to symbol and reloc reading. Rename
+ all uses of get_symtab_upper_bound to bfd_get_symtab_upper_bound.
+ Also:
+ * coffgrok.c (symcount): Change to long.
+ (do_sections_p1): Check for error return from
+ bfd_get_reloc_upper_bound. Change relcount to long, and check for
+ error from bfd_canonicalize_reloc.
+ (coff_grok): Change storage to long. Check for error from
+ bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
+ * nlmconv.c (main): Change symcount, newsymalloc, newsymcount, and
+ i to long. Check for error from bfd_get_symtab_upper_bound and
+ bfd_canonicalize_symtab.
+ (copy_sections): Change reloc_size and reloc_count to long. Check
+ for error from bfd_get_reloc_upper_bound and
+ bfd_canonicalize_reloc.
+ (mangle_relocs, i386_mangle_relocs, alpha_mangle_relocs): Change
+ reloc_count_ptr argument to long *. Make corresponding changes to
+ variables loaded from *reloc_count_ptr.
+ * nm.c (display_rel_file): Change storage and symcount to long.
+ Check for errors from bfd_get_symtab_upper_bound and
+ bfd_canonicalize_symtab.
+ * objcopy.c (filter_symbols): Change symcount, src_count and
+ dst_count to long.
+ (copy_object): Change symcount to long. Pass another argument to
+ fprintf. Check for errors from bfd_get_symtab_upper_bound and
+ bfd_canonicalize_symtab.
+ (copy_section): Change relcount to long. Check for errors from
+ bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
+ (mark_symbols_used_in_relocations): Change relcount and i to long.
+ Check for errors form bfd_get_reloc_upper_bound and
+ bfd_canonicalize_reloc.
+ * objdump.c (storage): Remove global variable.
+ (symcount): Changed to long.
+ (slurp_symtab): New local variable storage. Check for errors from
+ bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
+ (remove_useless_symbols): Change return value and count to long.
+ (objdump_print_address): Change min, max, thisplace and i to long.
+ (disassemble_data): Change i to long.
+ (dump_symbols): Change count to long.
+ (dump_relocs): Change relcount to long. Check for errors from
+ bfd_ret_reloc_upper_bound and bfd_canonicalize_reloc.
+ (display_info_table): Add casts when passing LONGEST_ARCH for
+ printf %* argument.
+
+
+ * nm.c (display_archive): Close each archive element after it has
+ been displayed.
+ * objdump.c (display_file): Likewise.
+
+
+ * configure.in: Change error message to refer to bfd/config.bfd
+ rather than bfd/configure.in.
+
+
+ * More fixes for object formats which allow multiple sections
+ with the same name:
+ * objcopy.c (setup_section): Make a new output section even if
+ one already exists with the given name.
+ (copy_section): Use isection->output_section rather than trying
+ to look the output section up by its (possibly non-unique) name.
+
+ * Makefile.in (install-info): Look for binutils.info in the
+ current directory, then in $(srcdir). Don't use $<.
+
+
+ * objdump.c (objdump_print_address): Make static. Declare with
+ prototype. Change vardiff from int to bfd_signed_vma. Correct
+ binary search termination condition. When looking for same
+ section symbol in relocatable file, handle final symbol correctly.
+
+
+ * Makefile.in: Avoid bug in hpux sed.
+
+ * objcopy.c: Changes to keep it from stripping symbols used
+ in output relocations.
+ (mark_symbols_used_in_relocations): New function. Mark symbols
+ used in output relocations with BSF_KEEP.
+ (filter_symbols): Do not strip symbols marked with BSF_KEEP.
+ (copy_object): Reorder actions. First setup sections, then
+ build the output symbol table, then copy the section contents.
+
+
+ * ar.c (write_archive): Allocate space for the null byte. From
+
+
+ * Makefile.in: Built nm.new and strip.new to avoid problems with
+ collect when . is in PATH.
+ (STRIP_PROG): Change from strip to strip.new.
+ (NM_PROG): Change from nm to nm.new.
+ (install): Remove the .new when installing.
+
+
+ * nlmconv.c (powerpc_build_stubs): Set BSF_DYNAMIC flag for each
+ symbol for which we build a stub.
+ (powerpc_mangle_relocs): Only reset TOC pointer for a call to a
+ symbol with BSF_DYNAMIC flag set.
+
+
+ * objcopy.c (filter_symbols): Use bfd_is_local_label to determine
+ if a symbol represents a compiler-generated local label.
+ (copy_object): Give the BFD backends a chance to copy any private
+ bfd data from the input BFD to the output BFD.
+ (setup_section): Give the BFD backends a chance to copy any private
+ section data from the input section to the output section.
+
+
+ * objcopy.c (mangle_section): Delete unused function.
+ (setup_section): Set osection here instead of calling
+ mangle section to do it.
+
+
+ * ar.c (write_archive): Close inarch before unlinking it.
+
+
+ * nlmconv.c (main): For PowerPC, call powerpc_build_stubs and
+ powerpc_resolve_stubs. Use __GOT0, not __toc_start. Handle it if
+ the start and end symbols are not in the text section.
+ (struct powerpc_stub): New struct definition.
+ (powerpc_stubs, powerpc_stub_insns): New static variables.
+ (powerpc_initial_got_size): New static variable.
+ (powerpc_build_stubs): New function.
+ (powerpc_resolve_stubs): New function.
+ (powerpc_mangle_relocs): Clear extraneous data in .got section.
+ Rearrange reloc handling to handle ELF relocs that are not
+ partial_inplace. Resolve PC relative relocs.
+
+
+ * ar.c (move_members): Fix it so that the abi positional modifiers
+ don't delete all archive members following the insert point.
+
+
+ * coffgrok.[ch]: New files, understand coff objects.
+ * coffdump.c: Uses coffgrok to dump out the debug info of a coff
+ file.
+ * sysroff.info: Description of a SYSROFF object file.
+ * sysinfo.y, syslex.l: Parse info file, generate a reader, writer,
+ header files and a printer.
+ * srconv.c: Uses coffgrok.c and sysroff.info to convert a coff
+ file to a SYSROFF file.
+
+
+ * ar.c (do_quick_append): Pad with a genuine character 10,
+ rather than whatever '\n' might happen to be.
+
+
+ * nlmconv.c (main): Ignore debugging symbols when looking for
+ special symbols by name.
+
+
+ * nlmconv.c: Include libiberty.h.
+
+ Support for PowerPC NetWare.
+ * nlmconv.c (main): For PowerPC NetWare, automatically define the
+ special symbols __toc_start.
+ (select_output_format): Handle bfd_arch_powerpc.
+ (mangle_relocs): Likewise.
+ (powerpc_mangle_relocs): New function.
+
+
+ * ar.c, bucomm.c, nlmconv.c, nm.c, objcopy.c, objdump.c,
+ size.c: Use bfd_get_error and bfd_set_error and new error names.
+
+
+ * objcopy.c (strip_main, copy_main): Add missing 'break' in switch.
+
+
+ * objdump.c (disassemble_data): Handle bfd_arch_powerpc.
+
+
+ * strings.c objdump.c nlmconv.c objcopy.c nm.c ar.c size.c (main):
+ Call xmalloc_set_program_name.
+
+
+ * objcopy.c (filter_bytes): Make MEMHUNK a char *, not PTR, so we
+ can do arithmetic on it.
+
+
+ * objdump.c (dump_section_stabs, read_section_stabs,
+ print_section_stabs): Functions broken out of dump_stabs_1.
+ Free the stabs and strings when done with them.
+
+
+ * nlmconv.c (main): Use bfd_get_flavour instead of struct member.
+ * ar.c (print_contents, extract_file), size.c
+ (print_berkeley_format, print_sysv_format): Use bfd_get_filename and
+ bfd_my_archive instead of dereferencing the structs directly.
+
+ * ar.c: Use bfd_fatal and bfd_nonfatal instead of bfd_perror and exit.
+ Indent. Remove DEFUNs.
+
+ * nlmconv.c (main), objcopy.c (copy_file): Print matching formats
+ if ambiguous match.
+ * nm.c (display_file, display_archive), size.c (display_bfd):
+ Eliminate gotos.
+ Print matching formats if there is an ambiguous match. Use
+ bfd_nonfatal instead of hardcoded error message if nothing matches.
+
+ * arsup.c, ar.c, objdump.c: Use bfd_get_filename instead of
+ abfd->filename.
+
+ * nm.c (display_archive): New function, from code in display_file.
+ (display_rel_file): Renamed from do_one_rel_file.
+
+ * size.c: Indent.
+ (display_archive): New function from code in display_file.
+ (display_file): Check bfd_close error return.
+
+ * strings.c (strings_object_file): Check bfd_check_format
+ error return.
+
+ * strings.c, objdump.c, size.c: Use bfd_nonfatal instead of bfd_perror.
+
+ * bucomm.c: Delete references to exit_handler. It wasn't set
+ anywhere, and now that we're using the libiberty xmalloc, it
+ wouldn't always get called before exiting.
+ (list_matching_formats): Function moved from objdump.c.
+ * bucomm.h: Declare it.
+
+ * objdump.c (disassemble_data): Move some variable decls closer to
+ their use. Add some comments. Replace a nested block with a
+ return.
+
+
+ * objdump.c (display_target_list, display_info_table): Check that
+ the bfd of the dummy output file is not null.
+
+
+ * objcopy.c (filter_bytes): New function.
+ (copy_section): Call it.
+ (copy_options, copy_usage, copy_main): Add --byte option to
+ activate it. Appropriate the -b option (which was an undocumented
+ synonym for -F) for it, also. Add --interleave, -i option for
+ additional control.
+ (setup_section, copy_section, mangle_section): Renamed with no `s'
+ on the end.
+ * objcopy.1, binutils.texi: Document the new options.
+
+ * objdump.c (display_target_tables, display_target_list):
+ New functions broken out of display_info.
+ Eliminate some magic constants. Use more meaningful variable names.
+ (dump_bfd_header): New function broken out of display_bfd.
+ (dump_section_header): New function broken out of dump_headers.
+ (remove_useless_symbols): Don't shadow global variable name with
+ parameter.
+ (objdump_print_address): Fix backward test.
+
+
+ * bucomm.c (print_arelt_descr): Change decl of `when' to time_t.
+ * objdump.h: Removed.
+
+
+ * objdump.c (display_file): Remove call to list_matching_formats.
+ It would never be called.
+ (list_matching_formats): Take an arg giving the list of matching
+ formats.
+ (display_bfd): Pass the arg, and get it filled in by calling
+ bfd_check_format_matches instead of bfd_check_format.
+ (display_info, display_info_table): target_vector was renamed to
+ bfd_target_vector.
+
+ * binutils.texi (objdump): Note some limitations of -h section
+ address printing.
+
+
+ * Makefile.in (MALLOC): Set to emptiness by default.
+ (ALL_CFLAGS): Add and use.
+ (arparse.h): Make it depend on arparse.y.
+ * ar.c (libbfd.h): Don't require to be in ../bfd.
+ * objdump.c (comp): Rename to compare_symbols.
+
+
+ * objdump.c (list_matching_formats): If the file format is ambiguous,
+ print the matching names so the user can choose one.
+ (display_bfd): Call it.
+ (display_file): Call it.
+
+
+ * objdump.c (disassemble_data): Support bfd_arch_rs6000.
+
+
+ * objdump.c (stab_name): Allocate dynamically.
+ (stab_print): Use pointers to strings instead of char arrays.
+ (dump_stabs): Change alloc and init of arrays appropriately.
+ (dump_stabs_1): Always decide whether to print stab_name or
+ the stab's type number, if unnamed.
+
+ * objcopy.c (strip_main, copy_main): Don't clobber the input file
+ if copy_file fails.
+
* nlmconv.c (main): Warn about an attempt to use a shared library
with uninitialized data.
* copy.c: Change =& constructs to = &, since they confuse older
C compilers.
-
+\f
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
projects / binutils.git / blobdiff