+Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config.sub: changed recognition of m68000 so that various
+ m68k types can be specified via m680[01234]0
+
+Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config.sub (basic_machine): fix sed so that '-foo' isn't
+ completely substituted out while .+'-foo' loses the '-foo'
+
+
+ * .Sanitize: Add flex to the list of keepers. flex is needed to
+ build GNU ld.
+
+
+ * config.sub ($os): Add -aout.
+
+
+ * configure: If host_makefile_frag is absolute, don't
+ prefix ${invsubdir} (relevant to libg++ auto-configure).
+
+
+ * Makefile.in (tooldir): Define it.
+ (all-ld): Depend on all-flex.
+
+
+ * Makefile.in (check): Fix libg++ special case.
+
+
+ * configure: do not bury `pwd` into config.status, thus do fewer
+ pwd's.
+
+ * configure: print the "Building in" message only when building in
+ other than "." AND verbose.
+
+ * configure: remove -s, rework -v to better accomodate guested
+ configures.
+
+ * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
+
+
+ * Makefile.in: macroize flags passed on recursion. remove
+ fileutils.
+
+
+ * configure: get makesrcdir right for subdirs deeper than 1.
+
+ * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
+ install.
+
+
+ * Makefile.in: don't print subdir_do or recursion lines.
+
+
+ * standards.texi: added menu item.
+
+ * Makefile.in: build and install standards.info.
+
+ * standards.texi: new file.
+
+
+ * configure: test for and move config.status pieces from
+ ${subdir}/.
+
+
+ * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
+ CFLAGS per new configuration strategy.
+ * configure: Test for existance of files before trying to mv
+ them, to avoid numerous non-existance messages.
+
+
+ * configure: correct final line of config.status.
+
+ * configure: patch from eggert. Avoids a protection problem if
+ the original Makefile.in is read only.
+
+ * configure: use move-if-change from gcc to create config.status.
+ Some makefiles depend on config.status to tell if a directory
+ has been reconfigured for a different host. This change
+ prevents those directories from remaking everything in the case
+ where the reconfig was only intended to rebuild a Makefile.
+
+ * configure: test for config.sub with "config.sub sun4" rather
+ than "config.sub ${host_alias}". Otherwise we can't tell a bad
+ host alias from a missing config.sub.
+
+
+ * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
+ MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
+
+
+ * configure: mkdir ${subdir} as needed.
+
+
+ * Makefile.in,configure.in: added autoconf.
+
+
+ * Makefile.in: no longer pass against on recursion.
+
+ * Makefile.in: added .NOEXPORT: so that stray makefile_frag
+ definitions are not inherited.
+
+ * configure: correct makesrcdir when subdir is .
+
+
+ * configure: Add support for 'subdirs' variable, which is
+ like 'configdirs', except that configure doesn't re-invoke
+ itself for subdirs, it just creates a Makefile for each subdir.
+ * configure.texi: Document subdirs.
+
+Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: added flex to configdirs
+
+
+ * Makefile.in: remove clean-stamps from clean.
+
+Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.in: Add gdbtest to configdirs.
+
+
+ * Makefile.in (MINUS_G): Add macro, default to -g, pass on
+ to recursive makes.
+ * configure.in: Recognize new ncr3000 config.
+
+
+ * Makefile.in, configure.in: removed references to gdbm.
+
+
+ * config.sub: Don't canonicalize os value
+ newsos* to bsd (readline needs to check for newsos).
+ (This fix was earlier made Jan 31, but got re-broken.)
+
+Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
+
+ * configure.in: sco is an os, not a vendor!
+
+ * configure: Quote $( better. Keep various shells happy.
+
+
+ * Makefile.in: eliminate stamp-files.
+
+
+ * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
+ Supress echoing of all the "if [ -d ... $(MAKE)" lines.
+
+
+ * config.sub: fix iris/iris3.
+
+
+ * configure: re-add -rm.
+
+
+ * Maskefile.in: add .stmp-rcs to all.
+
+ * configure.in: remove gas from rs6000 build, use aix host fragment.
+
+
+ * configure: pass down site_option during recursion.
+
+Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
+
+
+ * configure: Change exec_prefix so that it really defaults to prefix.
+
+
+ * Makefile.in, configure.in: Add support for mmalloc library.
+
+
+ * Makefile.in: add stmp dependencies for a few more things.
+
+
+ * configure: adjusted error message on objdir/srcdir configure
+ collision, per john's suggestion.
+
+ * Makefile.in: add libiberty stmp to all and all.cross.
+
+
+ * Makefile.in: remove force dependencies, add grep to all.
+
+
+ * Makefile.in: drop flex. make stamp files work.
+
+ * configure: added test for conflicting configuration in srcdir,
+ remove trailing slashes from srcdir. Otherwise emacs gdb mode
+ gets cranky. use relative paths for configure and srcdir
+ whenever possible. Send some error messages to stderr that were
+ going to stdout.
+
+
+ * Makefile.in: Fix libg++ rule to check for gcc directory
+ before using gcc/gcc. Also pass XTRAFLAGS.
+
+Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
+
+ * Makefile.in: added stmp-files so that directories aren't polled
+ when they are already built.
+
+ * configure.texi: fixed a node pointer problem.
+
+Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config.sub configure.in config/.Sanitize config/mh-irix4
+ gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
+ gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
+ gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
+ gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
+
+
+ * configure: -recurring becomes -silent. corrected help message
+ for -site= option.
+
+ * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
+
+
+ * configure: when building Makefile for crosses, replace
+ tooldir and program_prefix. default srcdir from location of
+ config.sub. remove "for host in hosts" and "for target in
+ targets" loops.
+
+
+ * Makefile.in: Do not pass bindir or mandir to cvs.
+
+
+ * Makefile.in, configure.in: removed traces of namesubdir,
+ -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
+ copyrights to '92, changed some from Cygnus to FSF.
+
+ * configure.texi: remove most references to multiple hosts,
+ multiple targets, subdirs, etc.
+
+ * configure.man: removed rcsid. reference config.sub not
+ config.subr.
+
+ * Makefile.in: mkdir $(infodir) on install-info.
+
+Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.texi: Explain better about .gdbinit and about
+ the environment that configure.in sections run in.
+
+Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.in: Ultrix is only a decstation if it's a MIPS.
+
+Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
+
+ * README: DOC.configure => cfg-paper.texi.
+
+Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config.sub (near case $os): Don't convert newsos* to bsd!
+
+Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
+
+ * Makefile.in: Reinstall change from gdb-4.3 that reduces
+ the number of copies of COPYING that go into the GDB tar file.
+
+Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
+
+ * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
+ gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
+ Fix SCO configuration stuff.
+
+Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
+
+ * Makefile.in: For libg++, make sure the -I pointing
+ to the gcc directory goes *after* all the libg++-local -I flags.
+ Also, move just-gcc dependency from just-libg++ to all-libg++.
+
+Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
+
+ * configure: Change -x to -f to keep Ultrix /bin/test happy.
+
+Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
+
+Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
+
+ * config.sub: Add stratus configuration frags. Also
+ submitted to FSF.
+
Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in (DEV_SUPPORT): add configure.man.
projects / binutils.git / blobdiff