+
+ * Makefile.in: Added stuff for building deja-gnu.
+ * ./deja-gnu/gdb.t21/ & ./deja-gnu/gdb.t22/:
+ Moved in-gdbme.C file to in-gdbme.cc because gcc was changed to
+ not recognize .C extensions anymore. Changed the configure.in
+ file to reflect the filename extension change.
+
+
+ * Makefile.in: Added separate definitions for C++.
+
+
+ * configure.in (configdirs): Add deja-gnu.
+
+
+ * README: Update for configure.texi and gdb-4.7 release.
+
+
+ * Makefile.in: Move "all" target to top of file.
+ Previously, first target was ".PHONY" which caused BSD4.4 make
+ to build .PHONY when make was run without arguments.
+
+
+ * Makefile.in: Add COPYING.LIB to GDB releases, now that there's
+ Library-copylefted code in libiberty.
+
+
+ * config.sub: Replace m68kmote with plain old m68k.
+
+
+ * Makefile.in: Remove space from blank line, avoid Make complaints.
+
+
+ * config.sub: Complain if no argument is given. Added support for
+ 386bsd as OS and target alias.
+
+
+ * Makefile.in (XTRAFLAGS): include newlib directories if
+ newlib/Makefile exists, rather than if host != target.
+
+Mon Oct 5 03:00:09 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
+
+ * config.sub: recognize sparclite-wrs-vxworks.
+
+ * Makefile.in (install-xiberty): added *-xiberty make rules (from
+ p3.) Added clean-xiberty to clean.
+
+Thu Oct 1 17:59:19 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: use *-*-* instead of nested cases for host and target
+
+
+ * Makefile.in: added -nostdinc to XTRAFLAGS if we are using gcc
+ from the same source tree and not building a cross-compiler. This
+ matters for the libg++ configuration if reconfiguring a tree that
+ has already been installed.
+
+
+ * config.sub (i486v/i486v4): Merge in from FSF version.
+
+
+ * configure: only set PWD if it is already set.
+
+
+ * configure: just set PWD=`pwd` at the top, since Ultrix sh
+ doesn't have unset and all success paths (and most error paths)
+ out set it anyway. (Note: should change all uses of ${PWD=`pwd`}
+ to just ${PWD} to avoid confusion.)
+
+
+ * configure: always set $(tooldir) to $(libdir)/$(target_alias),
+ even for a native compilation.
+
+
+ Changes to make the gdb.tar.Z rule work better.
+
+ * Makefile.in (GDB_SUPPORT_DIRS): Add opcodes.
+ (DEVO_SUPPORT): Add configure.texi.
+ (bfd-ilrt.tar.Z): Remove ancient rule.
+
+
+ * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
+ pick up the machine and system specific header files.
+
+ * configure.in, config.sub: added new target m68010-adobe-scout,
+ with alias of adobe68k. Changed configure.in to check for
+ -scout before -sco* to avoid a false match.
+
+ * Makefile.in: added AS_FOR_TARGET, passed down in
+ TARGET_FLAGS_TO_PASS. Added CC_FOR_BUILD, which is intended to be
+ the C compiler to use to create programs which are run in the
+ build environment, set it to default to $(CC), and passed it down
+ in FLAGS_TO_PASS and TARGET_FLAGS_TO_PASS.
+
+
+ * Makefile.in: added TARGET_FLAGS_TO_PASS, CC_FOR_TARGET,
+ AR_FOR_TARGET, RANLIB_FOR_TARGET, NM_FOR_TARGET. Pass
+ TARGET_FLAGS_TO_PASS, which defines CC, AR, RANLIB and NM as the
+ FOR_TARGET variants, to newlib and libg++.
+
+
+ * Makefile.in (all-gas, all-gdb): Require all-opcodes to be built
+ first.
+
+
+ * config.sub: Accept `elf' as an environment.
+
+
+ * Makefile.in (all-opcodes): cd into the right directory
+
+
+ * configure: added -program_transform_name option, used as
+ argument to sed when installing programs.
+ configure.texi: added documentation for -program_prefix,
+ -program_suffix and -program_transform_name.
+
+
+ * config.sub: Accept i486 where i386 ok.
+
+
+ * config.sub: accept we32k
+
+
+ * config.sub, configure.in: accept OSE68000 and OSE68k.
+
+ * Makefile.in: don't create all directories for ``make install'';
+ let the subdirectories create the ones they need.
+
+Tue Aug 11 23:13:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * COPYING: new file, GPL v2
+
+Tue Aug 4 01:12:43 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: use the new gen-info-dir, which needs a template
+ argument (which also lives in texinfo)
+
+ * configure.texi, standards.texi: fix INFO-DIR-ENTRY
+
+Mon Aug 3 15:41:28 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config/mh-solaris: removed the -xs from CFLAGS (let the people
+ with Sun's C compiler deal with it themselved)
+
+
+ * config.sub (ncr3000): Change i386 to i486.
+
+Thu Jul 23 00:12:17 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: add install-rcs, install-grep to
+ install-no-fixedincludes, removed install-bison and install-libgcc
+
+
+ * configure.in: grab the HPUX makefile fragment if on HPUX
+
+
+ * Makefile.in: eradicate bison spoor (ditto libgcc).
+ configure.in: recognise m68{k,000}-ericsson-OSE.
+ es1800 is alias for m68k-ericsson-OSE
+
+Sun Jul 19 17:49:02 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: rearrange the parts that remove programs from
+ configdirs, based now on HOST==TARGET or by canonical triple.
+
+
+ * test-build.mk: recurse explicitly with -f test-build.mk when
+ appropriate. predicate stage3 and comparison on the existence
+ of gcc. That is, if gcc isn't around, we aren't three-staging.
+ On very clean, also remove ...stamp-co. Build in-place before
+ doing other builds.
+
+
+ * Makefile.in, configure.in: add tgas
+
+
+ * Makefile.in: a number of changes merged in from progressive.
+
+ * configure.in: add libm.
+
+ * .cvsignore: ignore some stuff that comes from test-build.mk.
+
+Wed Jul 8 00:01:30 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config/mh-solaris: Use -xs when compiling so that Sun-C puts
+ a symbol-table into the executable.
+
+
+ * config.sub: Add es1800 (m68k-ericsson-es1800).
+
+
+ * configure: Add program_suffix (parallel to program_prefix)
+ * Makefile.in: adjust directory-creting script for losing decstation
+ * .Sanitize: don't nuke byacc!
+
+
+ * configure: Minor $subdir-related fixes.
+
+
+ * configure: fix various problems with propogating
+ makefile_target_frag in subdirs.
+ * configure.in: config libgcc if its there
+
+Fri Jun 19 15:19:40 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config.sub: HPPA merge.
+
+
+ * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install,
+ it is broken on ncr 3000's.
+
+Sun Jun 14 10:29:19 1992 John Gilmore (gnu at cygnus.com)
+
+ * Makefile.in: Replace all-bison with all-byacc in all
+ dependency lines for other tools (which now use byacc).
+
+Fri Jun 12 22:21:57 1992 John Gilmore (gnu at cygnus.com)
+
+ * config.sub: Add sun4sol2 => sparc-sun-solaris2.
+
+Tue Jun 9 17:18:11 1992 Fred Fish (fnf at cygnus.com)
+
+ * config/{mh-ncr3000, mh-sysv4}: Add INSTALL.
+
+
+ * Makefile.in: make gprof rules similar to byacc rules (instead of
+ vestigal $(unsubdir) that didn't work...)
+
+
+ * config.sub: Add support for Linux.
+ * Makefile.in: Use $(FLAGS_TO_PASS) more consistently
+ (at least for libg++).
+
+
+ * configure.texi: fix doc for the -nfp option to configure
+
+
+ * Makefile.in (all-binutils): ar needs flex, so depend on all-flex.
+
+Sun May 31 15:04:08 1992 Mark Eichin (eichin at cygnus.com)
+
+ * config.sub: changed [^-]+ to [^-][^-]* so that it works under
+ Sun sed. (BSD 4.3 sed doesn't handle [^-]+ either.)
+ * configure.in: added solaris* host_makefile_frag hook.
+
+Sun May 31 01:10:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config.sub: changed recognition of m68000 so that various
+ m68k types can be specified via m680[01234]0
+
+Sat May 30 21:01:06 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config.sub (basic_machine): fix sed so that '-foo' isn't
+ completely substituted out while .+'-foo' loses the '-foo'
+
+
+ * .Sanitize: Add flex to the list of keepers. flex is needed to
+ build GNU ld.
+
+
+ * config.sub ($os): Add -aout.
+
+
+ * configure: If host_makefile_frag is absolute, don't
+ prefix ${invsubdir} (relevant to libg++ auto-configure).
+
+
+ * Makefile.in (tooldir): Define it.
+ (all-ld): Depend on all-flex.
+
+
+ * Makefile.in (check): Fix libg++ special case.
+
+
+ * configure: do not bury `pwd` into config.status, thus do fewer
+ pwd's.
+
+ * configure: print the "Building in" message only when building in
+ other than "." AND verbose.
+
+ * configure: remove -s, rework -v to better accomodate guested
+ configures.
+
+ * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
+
+
+ * Makefile.in: macroize flags passed on recursion. remove
+ fileutils.
+
+
+ * configure: get makesrcdir right for subdirs deeper than 1.
+
+ * Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
+ install.
+
+
+ * Makefile.in: don't print subdir_do or recursion lines.
+
+
+ * standards.texi: added menu item.
+
+ * Makefile.in: build and install standards.info.
+
+ * standards.texi: new file.
+
+
+ * configure: test for and move config.status pieces from
+ ${subdir}/.
+
+
+ * config/mh-delta88, config/mh-ncr3000: Replace MINUS_G with
+ CFLAGS per new configuration strategy.
+ * configure: Test for existance of files before trying to mv
+ them, to avoid numerous non-existance messages.
+
+
+ * configure: correct final line of config.status.
+
+ * configure: patch from eggert. Avoids a protection problem if
+ the original Makefile.in is read only.
+
+ * configure: use move-if-change from gcc to create config.status.
+ Some makefiles depend on config.status to tell if a directory
+ has been reconfigured for a different host. This change
+ prevents those directories from remaking everything in the case
+ where the reconfig was only intended to rebuild a Makefile.
+
+ * configure: test for config.sub with "config.sub sun4" rather
+ than "config.sub ${host_alias}". Otherwise we can't tell a bad
+ host alias from a missing config.sub.
+
+
+ * Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
+ MINUS_G (this can be done with CFLAGS). Default CFLAGS to -g.
+
+
+ * configure: mkdir ${subdir} as needed.
+
+
+ * Makefile.in,configure.in: added autoconf.
+
+
+ * Makefile.in: no longer pass against on recursion.
+
+ * Makefile.in: added .NOEXPORT: so that stray makefile_frag
+ definitions are not inherited.
+
+ * configure: correct makesrcdir when subdir is .
+
+
+ * configure: Add support for 'subdirs' variable, which is
+ like 'configdirs', except that configure doesn't re-invoke
+ itself for subdirs, it just creates a Makefile for each subdir.
+ * configure.texi: Document subdirs.
+
+Mon Apr 13 18:50:16 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * configure.in: added flex to configdirs
+
+
+ * Makefile.in: remove clean-stamps from clean.
+
+Sat Apr 11 03:52:03 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.in: Add gdbtest to configdirs.
+
+
+ * Makefile.in (MINUS_G): Add macro, default to -g, pass on
+ to recursive makes.
+ * configure.in: Recognize new ncr3000 config.
+
+
+ * Makefile.in, configure.in: removed references to gdbm.
+
+
+ * config.sub: Don't canonicalize os value
+ newsos* to bsd (readline needs to check for newsos).
+ (This fix was earlier made Jan 31, but got re-broken.)
+
+Mon Apr 6 14:34:08 1992 Stu Grossman (grossman at cygnus.com)
+
+ * configure.in: sco is an os, not a vendor!
+
+ * configure: Quote $( better. Keep various shells happy.
+
+
+ * Makefile.in: eliminate stamp-files.
+
+
+ * Makefile.in: add send_pr. remove "force" from .stmp-gprof rule.
+ Supress echoing of all the "if [ -d ... $(MAKE)" lines.
+
+
+ * config.sub: fix iris/iris3.
+
+
+ * configure: re-add -rm.
+
+
+ * Maskefile.in: add .stmp-rcs to all.
+
+ * configure.in: remove gas from rs6000 build, use aix host fragment.
+
+
+ * configure: pass down site_option during recursion.
+
+Thu Mar 19 16:49:36 1992 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in (all.cross): Add .stmp-bfd .stmp-readline.
+
+
+ * configure: Change exec_prefix so that it really defaults to prefix.
+
+
+ * Makefile.in, configure.in: Add support for mmalloc library.
+
+
+ * Makefile.in: add stmp dependencies for a few more things.
+
+
+ * configure: adjusted error message on objdir/srcdir configure
+ collision, per john's suggestion.
+
+ * Makefile.in: add libiberty stmp to all and all.cross.
+
+
+ * Makefile.in: remove force dependencies, add grep to all.
+
+
+ * Makefile.in: drop flex. make stamp files work.
+
+ * configure: added test for conflicting configuration in srcdir,
+ remove trailing slashes from srcdir. Otherwise emacs gdb mode
+ gets cranky. use relative paths for configure and srcdir
+ whenever possible. Send some error messages to stderr that were
+ going to stdout.
+
+
+ * Makefile.in: Fix libg++ rule to check for gcc directory
+ before using gcc/gcc. Also pass XTRAFLAGS.
+
+Thu Mar 5 21:45:07 1992 K. Richard Pixley (rich@sendai)
+
+ * Makefile.in: added stmp-files so that directories aren't polled
+ when they are already built.
+
+ * configure.texi: fixed a node pointer problem.
+
+Thu Mar 5 12:05:58 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config.sub configure.in config/.Sanitize config/mh-irix4
+ gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
+ gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
+ gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
+ gdb/config/mh-irix4 texinfo/configure.in: Port to SGI Irix-4.x.
+
+
+ * configure: -recurring becomes -silent. corrected help message
+ for -site= option.
+
+ * Makefile.in: mkdir $(exec_prefix) and $(tooldir).
+
+
+ * configure: when building Makefile for crosses, replace
+ tooldir and program_prefix. default srcdir from location of
+ config.sub. remove "for host in hosts" and "for target in
+ targets" loops.
+
+
+ * Makefile.in: Do not pass bindir or mandir to cvs.
+
+
+ * Makefile.in, configure.in: removed traces of namesubdir,
+ -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
+ copyrights to '92, changed some from Cygnus to FSF.
+
+ * configure.texi: remove most references to multiple hosts,
+ multiple targets, subdirs, etc.
+
+ * configure.man: removed rcsid. reference config.sub not
+ config.subr.
+
+ * Makefile.in: mkdir $(infodir) on install-info.
+
+Wed Feb 19 15:41:13 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.texi: Explain better about .gdbinit and about
+ the environment that configure.in sections run in.
+
+Fri Feb 7 07:55:00 1992 John Gilmore (gnu at cygnus.com)
+
+ * configure.in: Ultrix is only a decstation if it's a MIPS.
+
+Fri Jan 31 21:54:51 1992 John Gilmore (gnu at cygnus.com)
+
+ * README: DOC.configure => cfg-paper.texi.
+
+Fri Jan 31 21:48:18 1992 Stu Grossman (grossman at cygnus.com)
+
+ * config.sub (near case $os): Don't convert newsos* to bsd!
+
+Fri Jan 31 02:27:32 1992 John Gilmore (gnu at cygnus.com)
+
+ * Makefile.in: Reinstall change from gdb-4.3 that reduces
+ the number of copies of COPYING that go into the GDB tar file.
+
+Thu Jan 30 16:17:30 1992 Stu Grossman (grossman at cygnus.com)
+
+ * bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
+ gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
+ Fix SCO configuration stuff.
+
+Tue Jan 28 23:51:07 1992 Per Bothner (bothner at cygnus.com)
+
+ * Makefile.in: For libg++, make sure the -I pointing
+ to the gcc directory goes *after* all the libg++-local -I flags.
+ Also, move just-gcc dependency from just-libg++ to all-libg++.
+
+Tue Jan 28 12:56:24 1992 Stu Grossman (grossman at cygnus.com)
+
+ * configure: Change -x to -f to keep Ultrix /bin/test happy.
+
+Sat Jan 18 17:45:11 1992 Stu Grossman (grossman at cygnus.com)
+
+ * Makefile.in (make-gdb.tar.Z): Remove texinfo targets.
+
+Sat Jan 18 17:03:21 1992 Fred Fish (fnf at cygnus.com)
+
+ * config.sub: Add stratus configuration frags. Also
+ submitted to FSF.
+
Sat Jan 18 15:35:29 1992 Stu Grossman (grossman at cygnus.com)
* Makefile.in (DEV_SUPPORT): add configure.man.
projects / binutils.git / blobdiff