-################################################################################
+##############################################################################
## This file is a shell script fragment that supplies the information
## necessary to tailor a template configure script into the configure
## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-################################################################################
+##############################################################################
### To add a new directory to the tree, first choose whether it is a target
### or a host dependent tool. Then put it into the appropriate list
# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline glob tcl tk"
+host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
# these tools are built for the host environment
#
host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- send_pr gprof gdbtest tgas etc expect deja-gnu z8ksim
+ prms send-pr gprof gdbtest tgas etc expect dejagnu sim
m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs"
+ textutils wdiff find emacs uudecode hello tar gzip indent
+ recode release sed utils"
-# these libraries are built for the target environment, and are built after the host
-# libraries and the host tools (which may be a cross compiler)
+# these libraries are built for the target environment, and are built after
+# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="libm xiberty newlib libg++"
+target_libs="libm xiberty newlib libio libg++"
+
-# these tools are built using the target libs, and are intended to run only in the
-# target environment. we currently have none.
+# these tools are built using the target libs, and are intended to run only
+# in the target environment. we currently have none.
#
-# note: any program that uses libraries that are in the "target_libs" list
-# belongs in this list. those programs are also very likely candidates for
-# the "native_only" list which follows
+# note: any program that *uses* libraries that are in the "target_libs"
+# list belongs in this list. those programs are also very likely
+# candidates for the "native_only" list which follows
#
-target_tools=
+target_tools="groff"
################################################################################
# directories to be built in the native environment only
#
-native_only="autoconf cvs diff emacs fileutils find grep ispell m4
- rcs sed shellutils textutils wdiff"
+native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
+ ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff
+ gprof"
-# directories to be built in the target environment only
+# directories to be built in a cross environment only
#
cross_only="xiberty newlib"
## All tools belong in one of the four categories, and are assigned above
+## We assign ${configdirs} this way to remove all embedded newlines. This
+## is important because configure will choke if they ever get through.
#
-configdirs="${host_libs} ${host_tools} ${target_libs} ${target_tools}"
+configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
################################################################################
srctrigger=move-if-change
srcname="gnu development package"
+# This gets set non-empty for some net releases of packages.
+appdirs=""
+
# per-host:
+# Work in distributions that contain no compiler tools, like Autoconf.
+if [ -d ${srcdir}/config ]; then
case "${host}" in
+ m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-motorola-m88kbcs) host_makefile_frag=config/mh-delta88;;
+ m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
- mips-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips-sgi-irix4) host_makefile_frag=config/mh-irix4 ;;
- mips-sgi-irix3) host_makefile_frag=config/mh-sysv ;;
+ mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
+ mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
+ mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
+ mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
+ mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
+ mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
+ i[34]86-ncr-sysv43) host_makefile_frag=config/mh-ncrsvr43 ;;
i[34]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
i[34]86-*-sco*) host_makefile_frag=config/mh-sco ;;
i[34]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[34]86-*-linux) host_makefile_frag=config/mh-linux ;;
+ i[34]86-*-linux*) host_makefile_frag=config/mh-linux ;;
i[34]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[34]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[34]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
- *-sun-solaris*) host_makefile_frag=config/mh-solaris ;;
+ *-bull-bosx*) host_makefile_frag=config/mh-aix ;;
+ *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
+ m68k-sun-*) host_makefile_frag=config/mh-sun3 ;;
*-sun-*) host_makefile_frag=config/mh-sun ;;
- *-hp-hpux) host_makefile_frag=config/mh-hpux ;;
- *-*sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- *-*sysv*) host_makefile_frag=config/mh-sysv ;;
+ *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
+ *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
+ rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
+ *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
+ *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
+ *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
esac
+fi
# per-target:
-bfd_target=
-
-case "${target}" in
- a29k-amd-ebmon) bfd_target="ebmon29k" ;;
- a29k-amd-udi) bfd_target="udi29k" ;;
- a29k-amd-*) echo "bad target_os for amd" 1>&2
- exit 1
- ;;
+gasdir=gas
+use_gnu_ld=
+use_gnu_as=
+
+# some tools are so dependent upon X11 that if we're not building with X,
+# it's not even worth trying to configure, much less build, that tool.
+
+case ${with_x} in
+ yes | "") # the default value for this tree is that X11 is available
+ ;;
+ no)
+ configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
+ ;;
+ *)
+ echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
+ ;;
esac
-# some tools are only suitable for building in a "native" situation.
+
+# Some tools are only suitable for building in a "native" situation.
# Those are added when we have a host==target configuration. For cross
# toolchains, we add some directories that should only be useful in a
# cross-compiler.
+is_cross_compiler=
+
if [ x"${host}" = x"${target}" ] ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
for i in ${cross_only} ; do
- configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+ configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=no
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
for i in ${native_only} ; do
- configdirs=`echo ${configdirs} | sed -e "s/$i//"`
+ configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
done
+ is_cross_compiler=yes
fi
+# Configure extra directories which are host specific
+
+case "${host}" in
+ i[34]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+esac
-# remove more programs from consideration, based on the host or
+# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
-#case "${host}" in
-# hppa*-*-*)
-# configdirs=`echo ${configdirs} | sed -e 's/emacs//'`
-# ;;
-#esac
+noconfigdirs=""
+
+case "${host}" in
+ i[34]86-*-netbsd*)
+ noconfigdirs="tk fileutils"
+ ;;
+ i[34]86-*-vsta)
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ ;;
+ i[34]86-*-go32)
+ noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ ;;
+esac
+
+
+
+
case "${target}" in
- mips-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ alpha-dec-osf1*)
+ noconfigdirs="$noconfigdirs emacs fileutils grep newlib"
+ ;;
+ alpha*-*-*)
+ noconfigdirs="$noconfigdirs newlib"
+ ;;
+ h8300*-*-* | \
+ h8500-*-*)
+ noconfigdirs="$noconfigdirs libg++ libio"
;;
- rs6000-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//;s/tk//'`
+ hppa*-*-*elf*)
+ # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/binutils//;s/gas//'`
+ # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
+ # cc is gcc, and on any system a user should be able to link cc to
+ # whatever they want. FIXME, emacs).
+ case "${CC}" in
+ "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
+ *) ;;
+ esac
+ noconfigdirs="$noconfigdirs ld shellutils"
;;
- *-*-solaris2)
- configdirs=`echo ${configdirs} | sed -e 's/ld//;s/gas//'`
+ i[34]86-*-go32)
+ # add the go32 support tools to the list
+ # but don't build gdb
+ configdirs=`echo go32 ${configdirs}`
+ noconfigdirs="$noconfigdirs gdb libg++ libio"
;;
+ i[34]86-*-sco*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
+ i[34]86-*-solaris2*)
+ # The linker does static linking correctly, but the Solaris C library
+ # has bugs such that some important functions won't work when statically
+ # linked. (See man pages for getpwuid, for example.)
+ noconfigdirs="$noconfigdirs ld"
+ ;;
+ i[34]86-*-sysv4*)
+ # The SYSV4 C compiler doesn't handle Emacs correctly
+ case "${CC}" in
+ "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
+ *) ;;
+ esac
+ # but that's okay since emacs doesn't work anyway
+ noconfigdirs="$noconfigdirs emacs"
+ ;;
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs ld binutils gprof textutils cvs"
+ ;;
+ rs6000-*-lynxos*)
+ # a gcc built textutils will cause the linker to hang on 'join'
+ # The CVS server code doesn't work on the RS/6000
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
+ use_gnu_ld=no
+ use_gnu_as=no
+ ;;
+ rs6000-*-*)
+ # a gcc built textutils will cause the linker to hang on 'join'
+ noconfigdirs="$noconfigdirs ld binutils gprof textutils"
+ ;;
+ m68k-apollo-*)
+ noconfigdirs="$noconfigdirs ld binutils gprof"
+ ;;
+ mips*-*-irix5*)
+ # The GNU linker does not support shared libraries.
+ noconfigdirs="$noconfigdirs ld gprof"
+ ;;
+ mips*-dec-bsd*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
+ mips*-*-bsd*)
+ noconfigdirs="$noconfigdirs gprof ld"
+ ;;
+ mips*-*-*)
+ noconfigdirs="$noconfigdirs gprof"
+ ;;
+ romp-*-*)
+ noconfigdirs="bfd binutils ld gas opcodes"
+ ;;
+ sh-*-*)
+ case "${host}" in
+ i[34]86-*-vsta) ;; # don't add gprof back in
+ *) configdirs=`echo gprof ${configdirs}` ;;
+ i[34]86-*-go32) ;; # don't add gprof back in
+ *) configdirs=`echo gprof ${configdirs}` ;;
+ esac
+ ;;
+ sparc-*-sunos4*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ noconfigdirs="$noconfigdirs gdb gdbtest newlib sim dejagnu expect tcl"
+ else
+ use_gnu_ld=no
+ fi
+ ;;
+ vax-*-vms)
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
+ ;;
+ vax-*-*)
+ noconfigdirs="$noconfigdirs newlib"
+ ;;
+ *-*-lynxos*)
+ # Newlib makes problems for libg++ in crosses.
+ noconfigdirs="$noconfigdirs newlib"
+ ;;
esac
-
-target_makefile_frag=config/mt-${bfd_target}
+notsupp=""
+for dir in . $noconfigdirs ; do
+ if [ $dir != . ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
+ configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
+ if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
+ notsupp="$notsupp $dir"
+ fi
+ fi
+done
+
+# Produce a warning message for the subdirs we can't configure.
+# This isn't especially interesting in the Cygnus tree, but in the individual
+# FSF releases, it's important to let people know when their machine isn't
+# supported by the one or two programs in a package.
+
+if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
+ # If $appdirs is non-empty, at least one of those directories must still
+ # be configured, or we error out. (E.g., if the gas release supports a
+ # specified target in some subdirs but not the gas subdir, we shouldn't
+ # pretend that all is well.)
+ if [ -n "$appdirs" ]; then
+ for dir in $appdirs ; do
+ if [ -r $dir/Makefile.in ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
+ appdirs=""
+ break
+ fi
+ done
+ if [ -n "$appdirs" ]; then
+ echo "*** This configuration is not supported by this package." 1>&2
+ exit 1
+ fi
+ fi
+ # Okay, some application will build, or we don't care to check. Still
+ # notify of subdirs not getting built.
+ echo "*** This configuration is not supported in the following subdirectories:" 1>&2
+ echo " ${notsupp}" 1>&2
+ echo " (Any other directories should still work fine.)" 1>&2
+fi
+
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if [ x${use_gnu_as} = x ] ; then
+ if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
+ with_gnu_as=yes
+ withoptions="$withoptions --with-gnu-as"
+ fi
+fi
+
+if [ x${use_gnu_ld} = x ] ; then
+ if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
+ with_gnu_ld=yes
+ withoptions="$withoptions --with-gnu-ld"
+ fi
+fi
#
# Local Variables:
# fill-column: 131
# End:
#
-
projects / binutils.git / blobdiff