# This file is going to be ugly. It will be VERY specific to the
# Cygnus environment and build-process.
#
+# Useful targets (rt = recursion target):
+# (please correct or expand on this)
+# FIXME: Might some of these be superfluous?
#
-
+# all-emacs
+# all-cygnus - set up install directories, build 3stage native and all
+# supported cross targets, then check 3stage'd native
+# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
+# native - set up install directories, build 3stage native
+# (rt = $(canonhost)-stamp-3stage-1)
+# build-cygnus - build 3stage native and all supported cross targets
+# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
+# build-latest - build native and all supported cross targets
+# (rt = build-latest)
+# all-native - set up install directories, build native
+# (rt = do-native)
+# all-cross - set up install directories, build all targets
+# (rt = do-cygnus)
+# config - configure native and all supported cross targets
+# (rt = do1-config, do-native-config for cross)
+# build - build native and all supported cross targets
+# (rt = do1-build, build-native for cross)
+# 3build - build 3stage native and all supported cross targets
+# (rt = all, build-cygnus for cross)
+# build-all-latest - build 3stage native and all supported cross targets
+# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
+# clean - remove objdir directories, stamp files
+# (rt = clean)
+#
+# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
+
TREE = devo
include $(TREE)/release-info
-TEST_INSTALL_DISK = /tug
+TEST_INSTALL_DISK = /galt
INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
ifeq ($(canonhost),sparc-sun-solaris2.1)
canonhost := sparc-sun-solaris2
endif
+ifeq ($(canonhost),sparc-sun-solaris2.3)
+canonhost := sparc-sun-solaris2
+endif
ifeq ($(canonhost),mips-dec-ultrix4.2)
canonhost := mips-dec-ultrix
endif
ifeq ($(canonhost),mips-sgi-irix4.0.1)
canonhost := mips-sgi-irix4
endif
+ifeq ($(canonhost),mips-sgi-irix4.0.5H)
+canonhost := mips-sgi-irix4
+endif
ifeq ($(canonhost),rs6000-ibm-aix3.2)
canonhost := rs6000-ibm-aix
endif
canonhost := i386-sysv4.2
endif
ifeq ($(canonhost),i386-lynx-lynxos)
-canonhost := i386-lynxos
+canonhost := i386-lynx
endif
ifeq ($(canonhost),m68k-lynx-lynxos)
-canonhost := m68k-lynxos
+canonhost := m68k-lynx
+endif
+ifeq ($(canonhost),rs6000-lynx-lynxos2.2.2)
+canonhost := rs6000-lynx
endif
ifeq ($(canonhost),sparc-sun-sunos4.1.3)
h8300-hms \
i386-aout \
i386-lynx \
- i386-netware \
- i960-vxworks i960-intel-nindy \
- mips-idt-ecoff \
+ i960-vxworks \
+ mips-idt-ecoff mips64-elf mips-elf \
m68k-aout m68k-vxworks m68k-coff \
m68k-lynx \
sh-hms \
- sparc-aout sparc-vxworks \
+ sparc-aout sparc-lynx sparc-vxworks \
sparclite-aout sparclite-vxworks \
- z8k-coff
+ sparclite-coff z8k-coff
GCC = gcc -O -pipe
all: all-cygnus
endif
ifeq ($(canonhost),m68k-sun-sunos4.1.1)
TARGETS = $(NATIVE) \
- m68k-aout m68k-coff i960-intel-nindy
+ m68k-coff
GCC = gcc -O -msoft-float
CC = cc -J
all: all-cygnus
ifeq ($(canonhost),sparc-sun-solaris2)
TARGETS = $(NATIVE) \
a29k-amd-udi \
- i386-aout \
- i960-vxworks i960-intel-nindy \
+ i960-vxworks \
m68k-aout m68k-coff m68k-vxworks \
- m88k-coff \
- mips-idt-ecoff mipsel-idt-ecoff \
- sparc-aout sparc-vxworks sparclite-aout
+ m88k-coff \
+ mipsel-idt-ecoff sparc-lynx
CC = cc -Xs
GCC = gcc -O -pipe
all: all-cygnus
ifeq ($(canonhost),mips-sgi-irix4)
TARGETS = $(NATIVE) \
- mips-idt-ecoff sh-hms
-CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1500
+ mips-idt-ecoff sh-hms \
+ mips64-elf
+CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
all: all-cygnus
endif
ifeq ($(canonhost),rs6000-ibm-aix)
TARGETS = $(NATIVE) \
- i960-vxworks i960-intel-nindy \
- m68k-vxworks
+ i960-vxworks \
+ m68k-aout
all: all-cygnus
endif
$(NATIVE) \
i960-vxworks \
m68k-aout m68k-vxworks
-# sh-hms # doesn't work
-CC = cc
+CC = cc -Wp,-H256000
#CFLAGS = +Obb2000
CFLAGS = -g
-all: all-native
+all: all-cygnus
endif
ifeq ($(canonhost),i386-sco3.2v4)
CFLAGS =
CXXFLAGS = -O
MAKEINFOFLAGS = --no-split
-all: all-cross
+all: all-dos
endif
ifeq ($(canonhost),i386-sysv4.2)
-TARGETS = $(NATIVE)
+TARGETS = $(NATIVE) i386-netware
CC = cc
all: all-cygnus
endif
-ifeq ($(canonhost),i386-lynxos)
+ifeq ($(canonhost),i386-lynx)
+TARGETS = $(NATIVE)
+CC = /bin/gcc
+all: all-cygnus
+SHELL=/bin/bash
+endif
+
+ifeq ($(canonhost),m68k-lynx)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
-ifeq ($(canonhost),m68k-lynxos)
+ifeq ($(canonhost),sparc-lynx)
TARGETS = $(NATIVE)
CC = /bin/gcc
all: all-cygnus
SHELL=/bin/bash
endif
+ifeq ($(canonhost),rs6000-lynx)
+TARGETS = $(NATIVE)
+CC = /usr/cygnus/progressive/bin/gcc
+all: all-cygnus
+SHELL=/bin/bash
+endif
FLAGS_TO_PASS := \
"GCC=$(GCC)" \
"RELEASE_TAG=$(RELEASE_TAG)" \
"SHELL=$(SHELL)"
+# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
+ifeq ($(patsubst %-lynxos,lynxos,$(canonhost)),lynxos)
+FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
+endif
+
all-emacs:
@echo build started at `date`
[ -d $(INSTALLDIR) ] || mkdir $(INSTALLDIR)
echo " completed successfully" ; \
done
+do-dos:
+ $(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
+all-dos:
+ @for i in $(TARGETS) ; do \
+ echo "building $(canonhost) cross to $$i" ; \
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
+ echo " completed successfully at `date`" ; \
+ done
+
config:
@for i in $(TARGETS) ; do \
if [ "$$i" = "native" ] ; then \
fi ; \
done
+clean:
+ $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
+
### Local Variables:
### fill-column: 131
### End:
projects / binutils.git / blobdiff