+
+ * configure.in: Add i386-pe configuration.
+
+
+ * mpw-build.in (install): Install GDB after LD.
+
+
+ * mpw-config.in (elf/mips.h): Always forward-include, needed
+ for GDB to build.
+
+
+ * testsuite: New directory for customer acceptance and whole tool
+ chain tests.
+
+
+ * configure: If per-host line isn't found, but AC_OUTPUT is found
+ and a configure script exists, run it instead.
+
+
+ * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
+
+
+ * configure: Set build_{cpu,vendor,os,alias} to host values when
+ --build isn't specified.
+
+
+ * Makefile.in (PICFLAG, PICFLAG_FOR_TARGET): New macros.
+ (FLAGS_TO_PASS): Pass them.
+ (EXTRA_TARGET_FLAGS): Ditto.
+
+ * config/m?-*pic: Define PICFLAG* instead of LIB*FLAGS*.
+
+
+ * Makefile.in (all-libg++): Depend on all-libstdc++.
+
+
+ * configure.in (noconfigdirs): Enable all packages for
+ i386-unknown-netbsd.
+
+
+ * configure.in (noconfigdirs): Don't configure tk for i386-go32
+ hosted builds (DOS builds)
+
+
+ Changes for ARM based on patches from Richard Earnshaw:
+ * config.sub: Handle armeb and armel.
+ * configure.in: Omit arm linker only for riscix.
+
+
+ * config.guess: Update from FSF.
+
+
+ * config.sub: Recognize powerpcle as the little endian varient of
+ the PowerPC. Recgonize ppc as a PowerPC variant, and ppcle as a
+ powerpcle variant. Convert pentium into i586, not i486. Add p5
+ alias for i586. Map new x86 variants p6, k5, nexgen into i586
+ temporarily.
+
+
+ * configure.in (hppa*-*-lites*): Treat like hppa*-*-*elf*.
+
+
+ * config.sub: Accept -lites* as a basic system type.
+
+
+ * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
+ installed, and if so return linuxoldld as the system name.
+
+
+ * config.guess: Add hppa1.1-hp-lites support.
+
+
+ * configure.in: Don't build newlib for m68k-vxworks5.1.
+
+
+ * configure.in (mips-sgi-irix6): Use mh-irix5.
+
+
+ * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
+
+
+ * test-build.mk: Enable building of shared libraries on IRIX 5 and
+ OSF/1. Fix compiler flags.
+ * build-all.mk: Support Linux and OSF/1 3.0. Fix compiler flags.
+
+
+ * configure.in: Recognize --with-newlib.
+ (sparc-*-sunos4*): Build sim, dejagnu, expect, tcl if cross target.
+
+
+ * Makefile.in: move {all,check,install}-gdb from *_MODULES
+ to *_X11_MODULES due to gdbtk needing X include files et al.
+
+
+ Merge in support for Mac MPW as a host.
+ (Old change descriptions retained for informational value.)
+
+ * mpw-config.in: Add generic include forwards for cpu-specific
+ include files in aout and elf directories.
+
+ * mpw-configure: Added copyright.
+ * mpw-config.in: Check for presence of required build tools.
+ (target_libs): Add newlib.
+ (target_tools): Add examples.
+ (Read Me): Generate as "Read Me for MPW" instead.
+ * mpw-build.in: Base sub-builds on all-foo instead of do-foo.
+ (all-byacc, do-byacc, all-flex, do-flex, do-newlib): New actions.
+ (do-gas, do-gcc, do-gdb, do-ld): Build Version.r first.
+
+ * mpw-configure: Remove subdir-specific makefile hackery,
+ delete mk.tmp after using it.
+
+ * mpw-build.in (all): Display start and end times.
+
+ * mpw-configure (host_canonical): Set.
+ (target_cpu): Always add to makefiles.
+ (ARCHDEFS, EMUL): Add to makefile only if nonempty.
+ (TM_FILE, XM_FILE, NM_FILE): No longer add to makefile.
+ (mpw-mh-mpw): Look for in srcdir and srcroot.
+ Use sed instead of mpw-edit-prefix to edit prefix definitions.
+
+ * mpw-build.in: (install-only): New target.
+
+ * mpw-configure (host_alias, target_alias): Rename from hostalias
+ and targetalias, add into generated Makefile.
+ (mk.tmp): If present, add into generated Makefile.
+ * mpw-build.in (all-gas): Build config.h first before gas proper.
+
+ * mpw-configure (config.status): Write only if changed.
+ * mpw-config.in (readline): Configure it (not built, just used for
+ definitions).
+
+ * mpw-config.in (elf/mips.h): Add a forward include.
+
+ * mpw-config.in: Forward-include most .h files in include into
+ extra-include.
+ (readline): Don't build.
+ mpw-build.in (install): Install GDB.
+
+ * mpw-configure (prefix, mpw_prefix): Handle it.
+ * mpw-config.in (mmalloc, readline): Don't configure.
+ * mpw-build.in (thisscript): Rename to ThisScript.
+ Use mpw-build instead of BuildProgram everywhere.
+ (mmalloc, readline): Don't build.
+ * mpw-README: New file, basic documentation about the MPW port.
+
+ * mpw-config.in: Use forward-include to create include files.
+
+ * mpw-configure: Add more things to the top of each configured
+ Makefile, including contents of config/mpw-mh-mpw.
+ * mpw-config.in (extra-include): Create this directory and fill it
+ with Posix-like include files when configuring.
+
+ * config.sub (apple, mac, mpw): Add various aliases.
+
+ * mpw-build.in: New file, top-level build script fragment for MPW.
+ * mpw-configure: New file, configure script for MPW.
+ * mpw-config.in: New file, config fragment for MPW.
+
+
+ * configure.in (host_libs): Remove glob, since it is gone from the
+ sources.
+
+
+ * Makefile.in: define empty GDB_NLM_DEPS var.
+
+ * configure.in(target_makefile_frag): use config/mt-netware
+ for netware targets.
+
+
+ * config.sub: Merge in recent FSF changes. Remove linux special
+ cases.
+
+
+ build-all.mk,config/mh-solaris: revert these two changes:
+
+
+ * build-all.mk: Use CC=cc -Xs on Solaris.
+
+ Mon Mar 29 19:59:26 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * config/mh-solaris: SunPRO C needs -Xs to be able to get a
+ working xmakefile for Emacs.
+
+
+ * glob/*: Removed. Schauer's 24 Feb 1994 readline change made us
+ stop using it.
+ * Makefile.in: Nuke all references to glob subdirectory.
+
+
+ * configure.in: Fix --enable-shared logic in per-host.
+
+
+ * configure.in (*-hp-hpux[78]*): Use mh-hpux8.
+
+
+ * configure.in (noconfigdirs): Don't build gas on AIX, for
+ powerpc*-*-aix* as well as for rs6000*-*-aix*.
+
+
+ * configure: Fix --cache-file to work if the file argument is a
+ relative path.
+
+
+ * configure: If the --cache-file is used, pass it down to
+ configure in subdirectories.
+
+
+ * config.sub: add vxworks29k configuration.
+
+
+ * Makefile.in (taz): Do "diststuff" part quietly.
+
+
+ * config.sub: Mini-merge with gcc/config.sub.
+
+
+ * config.guess (IRIX): Sed - to _.
+
+
+ * Makefile.in (source-vault, binary-vault): New targets
+
+
+ * config.sub: Recognize -eabi as a basic system type.
+
+
+ * configure.in (enable_shared stuff): Fix typo.
+
+
+ * Makefile.in (BASE_FLAGS_TO_PASS): Fix typo in passing LIBCXXFLAGS*.
+
+
+ * Makefile.in (LIBCXXFLAGS_FOR_TARGET): Add -fno-implicit-templates.
+
+
+ * configure.in (rs6000-*-*): Don't build gas.
+
+
+ * Makefile.in: Use /x/x/ instead of /brokensed/brokensed/, to
+ reduce command line length.
+ (AS_FOR_TARGET): Check for as.new, not Makefile.
+ (NM_FOR_TARGET): Check for nm.new, not Makefile.
+
+
+ * config.guess: Merge from FSF.
+
+
+ * configure: Don't use $ when handling program_suffix.
+
+
+ * configure.in: Configure tk for hppa/hpux.
+
+
+ * Makefile.in (LIBGXX_SUPPORT_DIRS): Add libstdc++.
+
+
+ * Makefile.in: Move -fno-implicit-template from CXXFLAGS
+ to LIBCXXFLAGS. Tests are better run without it.
+
+
+ * Makefile.in (all-ispell): Depend on all-emacs19 instead of all-emacs.
+
+
+ * configure.in (*-*-netware*): Don't configure xiberty.
+
+
+ * configure.in: Remove tk from native_only list.
+
+
+ * build-all.mk: Add mips-ncd-elf target to sun4 targets
+ for special NCD build.
+
+
+ * Makefile.in (DEVO_SUPPORT): Remove configure.bat and
+ makeall.bat, they're only useful for binutils snapshots.
+ (binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and
+ makeall.bat to specified SUPPORT_FILES.
+
+
+ * build-all.mk: Add Ericsson targets to sun4 and solaris
+ hosts. Add BNR's sun4 target to solaris host, so their
+ build-from-source will be tested in-house first.
+
+
+ * Makefile.in (LIBCFLAGS): New variable.
+ (CFLAGS_FOR_TARGET): Ditto.
+ (LIBCFLAGS_FOR_TARGET): Ditto.
+ (LIBCXXFLAGS): Ditto.
+ (CXXFLAGS_FOR_TARGET): Ditto.
+ (LIBCXXFLAGS_FOR_TARGET): Ditto.
+ (BASE_FLAGS_TO_PASS): Pass them.
+ (EXTRA_TARGET_FLAGS): Ditto.
+
+ * configure.in, config/m[th]-*pic: Support --enable-shared.
+
+
+ * configure.in (target_libs): Include libstdc++ again.
+ * config.guess: Update from FSF (for FreeBSD).
+
+
+ * Makefile.in (DEVO_SUPPORT): Include configure.bat and
+ makeall.bat.
+ (DISTDOCDIRS): Add `etc'.
+ (ETC_SUPPORT_PFX): New variable.
+ (taz): Include anything from etc starting with a word in
+ ETC_SUPPORT_PFX.
+
+
+ * config.sub: Update for recent FSF changes. Remove obsolete
+ h8300hds entry. Add -windows* and -osx as basic os. Minor
+ spacing changes.
+
+
+ * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
+
+ * config.guess: Merge with FSF.
+ * configure.in: Match on i?86-ncr-sysv4.3, not i?86-ncr-sysv43.
+
+
+ * configure: Since the "trap 0" handler will override the exit
+ status on many systems, only use it for "exit 1", and make it set
+ a non-zero exit status; reset it before "exit 0". Also, check
+ exit status of config.sub, and error out if it failed.
+
+
+ * Makefile.in: (ALL_TARGET_MODULES,INSTALL_TARGET_MODULES) Build
+ and install libgloss.
+
+
+ * Makefile.in (all-binutils): Depend upon all-byacc.
+
+ * configure.in: Don't build emacs on Irix 5.
+
+
+ * configure.in (*-*-netware*): Add libio.
+
+
+ * Makefile.in (ALL_TARGET_MODULES): Add libstdc++.
+ (CHECK_TARGET_MODULES): Ditto.
+ (INSTALL_TARGET_MODULES): Ditto.
+ (TARGET_LIBS): Ditto.
+ (all-libstdc++): Note dependencies.
+
+
+ * Makefile.in (BINUTILS_SUPPORT_DIRS): Add gas.
+
+
+ * Makefile.in (CXXFLAGS): Use -fno-implicit-templates instead of
+ -fexternal-templates.
+
+ * configure.in (target_libs): Add libstdc++.
+ (noconfigdirs): Add libstdc++ as appropriate.
+
+
+ * config.guess: Update from FSF.
+
+
+ * configure: Use ${config_shell} when running ${configsub}.
+
+
+ * config.sub: No longer recognize h8300h.
+
+
+ * config.sub: Remove extraneous differences between config.sub and
+ gcc/config.sub.
+
+
+ * Makefile.in (DISTSTUFFDIRS): Add gas.
+
+
+ * COPYING.NEWLIB: New file.
+
+
+ * config.guess (HP-UX): Patch from Harlan Stenn
+
+
+ * config.guess (sun4*:SunOS:*:*): Change '-JL' to '_JL'.
+
+
+ * config.sub: Merge nextstep cleanup from FSF.
+
+
+ * configure.in (arm-*-*): Don't configure ld for this target.
+
+
+ * configure.in (*-*-netware): don't configure libg++, libio,
+ librx, or newlib.
+
+
+ * configure.in (alpha-dec-osf*): Use osf*, not osf1*. Don't
+ configure ld--it works, but it doesn't support shared libraries.
+
+
+ * config.guess (*-unknown-freebsd*): Get rid of possible
+ trailing "(Release)" in version string.
+
+
+ * config.guess: Fix i486-ncr-sysv43 -> i486-ncr-sysv4.3.
+ Fix type: *-next-neststep -> *-next-nextstep.
+
+ * config.guess: Merge from FSF:
+
+
+ * config.guess: Recognize powerpc-ibm-aix3.2.5.
+
+
+ * config.guess: Recognize UnixWare 1.1 (UNAME_SYSTEM is SYSTEM_V
+ instead of UNIX_SV for UnixWare 1.0).
+
+
+ * Makefile.in (all-gdb): Add dependencies on all-gcc and all-ld
+ to make gdb/nlm/* build after the compiler and linker.
+
+
+ * config.guess (netbsd, freebsd, linux): Accept any machine,
+ not just i[34]86.
+ (m68k-atari-sysv4): Relocate to match FSF version.
+
+ * config.guess: More merges from the FSF:
+
+ Add a space before function call or macro invocation.
+
+
+ * config.guess: Add trap cmd to remove dummy.c and dummy when
+ interrupted.
+
+
+ * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
+ (dummy): Redirect stderr from compilation of dummy.c.
+
+
+ * config.guess: Distinguish between NeXTStep 2.1 and 3.x.
+
* configure: Accept and ignore --cache*, for compatibility with
- * (config.guess): Merge from FSF:
+ * config.guess: Merge from FSF:
projects / binutils.git / blobdiff