Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
- 2009, 2010 Free Software Foundation, Inc.
+ 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
void _initialize_valprint (void);
-#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
+#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
struct value_print_options user_print_options =
{
show_print_max (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Limit on string chars or array elements to print is %s.\n"),
+ fprintf_filtered (file,
+ _("Limit on string chars or array "
+ "elements to print is %s.\n"),
value);
}
show_input_radix (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Default input radix for entering numbers is %s.\n"),
+ fprintf_filtered (file,
+ _("Default input radix for entering numbers is %s.\n"),
value);
}
show_output_radix (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Default output radix for printing of values is %s.\n"),
+ fprintf_filtered (file,
+ _("Default output radix for printing of values is %s.\n"),
value);
}
/* Print repeat counts if there are more than this many repetitions of an
element in an array. Referenced by the low level language dependent
- print routines. */
+ print routines. */
static void
show_repeat_count_threshold (struct ui_file *file, int from_tty,
value);
}
-/* If nonzero, stops printing of char arrays at first null. */
+/* If nonzero, stops printing of char arrays at first null. */
static void
show_stop_print_at_null (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Printing of char arrays to stop at first null char is %s.\n"),
+ fprintf_filtered (file,
+ _("Printing of char arrays to stop "
+ "at first null char is %s.\n"),
value);
}
-/* Controls pretty printing of structures. */
+/* Controls pretty printing of structures. */
static void
show_prettyprint_structs (struct ui_file *file, int from_tty,
}
/* If nonzero, causes unions inside structures or other unions to be
- printed. */
+ printed. */
static void
show_unionprint (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Printing of unions interior to structures is %s.\n"),
+ fprintf_filtered (file,
+ _("Printing of unions interior to structures is %s.\n"),
value);
}
-/* If nonzero, causes machine addresses to be printed in certain contexts. */
+/* If nonzero, causes machine addresses to be printed in certain contexts. */
static void
show_addressprint (struct ui_file *file, int from_tty,
fprintf_filtered (stream, _("<value optimized out>"));
return 0;
}
+
+ if (value_bits_synthetic_pointer (val, TARGET_CHAR_BIT * offset,
+ TARGET_CHAR_BIT * TYPE_LENGTH (type)))
+ {
+ fputs_filtered (_("<synthetic pointer>"), stream);
+ return 0;
+ }
}
return 1;
for (specific CPU type and thus specific target byte ordering), then
either the print routines are going to have to take this into account,
or the data is going to have to be passed into here already converted
- to the host byte ordering, whichever is more convenient. */
+ to the host byte ordering, whichever is more convenient. */
int
/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
The raison d'etre of this function is to consolidate printing of
- LONG_LONG's into this one function. The format chars b,h,w,g are
+ LONG_LONG's into this one function. The format chars b,h,w,g are
from print_scalar_formatted(). Numbers are printed using C
- format.
+ format.
USE_C_FORMAT means to use C format in all cases. Without it,
'o' and 'x' format do not include the standard C radix prefix
the integer is a protocol thing, not a user-visible thing). The
parameter remains to preserve the information of what things might
be printed with language-specific format, should we ever resurrect
- that capability. */
+ that capability. */
void
print_longest (struct ui_file *stream, int format, int use_c_format,
case 'o':
val = int_string (val_long, 8, 0, 0, use_c_format); break;
default:
- internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
}
fputs_filtered (val, stream);
}
int
longest_to_int (LONGEST arg)
{
- /* Let the compiler do the work */
+ /* Let the compiler do the work. */
int rtnval = (int) arg;
- /* Check for overflows or underflows */
+ /* Check for overflows or underflows. */
if (sizeof (LONGEST) > sizeof (int))
{
if (rtnval != arg)
int b;
/* Declared "int" so it will be signed.
- * This ensures that right shift will shift in zeros.
- */
+ This ensures that right shift will shift in zeros. */
+
const int mask = 0x080;
/* FIXME: We should be not printing leading zeroes in most cases. */
p++)
{
/* Every byte has 8 binary characters; peel off
- * and print from the MSB end.
- */
+ and print from the MSB end. */
+
for (i = 0; i < (BITS_IN_BYTES * sizeof (*p)); i++)
{
if (*p & (mask >> i))
}
/* VALADDR points to an integer of LEN bytes.
- * Print it in octal on stream or format it in buf.
- */
+ Print it in octal on stream or format it in buf. */
+
void
print_octal_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len, enum bfd_endian byte_order)
#define LOW_TWO 0007
/* For 32 we start in cycle 2, with two bits and one bit carry;
- * for 64 in cycle in cycle 1, with one bit and a two bit carry.
- */
+ for 64 in cycle in cycle 1, with one bit and a two bit carry. */
+
cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
carry = 0;
switch (cycle)
{
case 0:
- /* No carry in, carry out two bits.
- */
+ /* No carry in, carry out two bits. */
+
octa1 = (HIGH_ZERO & *p) >> 5;
octa2 = (LOW_ZERO & *p) >> 2;
carry = (CARRY_ZERO & *p);
break;
case 1:
- /* Carry in two bits, carry out one bit.
- */
+ /* Carry in two bits, carry out one bit. */
+
octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
octa2 = (MID_ONE & *p) >> 4;
octa3 = (LOW_ONE & *p) >> 1;
break;
case 2:
- /* Carry in one bit, no carry out.
- */
+ /* Carry in one bit, no carry out. */
+
octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
octa2 = (MID_TWO & *p) >> 3;
octa3 = (LOW_TWO & *p);
{
case 0:
/* Carry out, no carry in */
+
octa1 = (HIGH_ZERO & *p) >> 5;
octa2 = (LOW_ZERO & *p) >> 2;
carry = (CARRY_ZERO & *p);
case 1:
/* Carry in, carry out */
+
octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
octa2 = (MID_ONE & *p) >> 4;
octa3 = (LOW_ONE & *p) >> 1;
case 2:
/* Carry in, no carry out */
+
octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
octa2 = (MID_TWO & *p) >> 3;
octa3 = (LOW_TWO & *p);
}
/* VALADDR points to an integer of LEN bytes.
- * Print it in decimal on stream or format it in buf.
- */
+ Print it in decimal on stream or format it in buf. */
+
void
print_decimal_chars (struct ui_file *stream, const gdb_byte *valaddr,
unsigned len, enum bfd_endian byte_order)
int flip;
/* Base-ten number is less than twice as many digits
- * as the base 16 number, which is 2 digits per byte.
- */
+ as the base 16 number, which is 2 digits per byte. */
+
decimal_len = len * 2 * 2;
digits = xmalloc (decimal_len);
* the nibbles by 16, add Y and re-decimalize. Repeat with Z.
*
* The trick is that "digits" holds a base-10 number, but sometimes
- * the individual digits are > 10.
+ * the individual digits are > 10.
*
* Outer loop is per nibble (hex digit) of input, from MSD end to
* LSD end.
*/
if (flip == 0)
{
- /* Take top nibble.
- */
+ /* Take top nibble. */
+
digits[0] += HIGH_NIBBLE (*p);
flip = 1;
}
else
{
- /* Take low nibble and bump our pointer "p".
- */
+ /* Take low nibble and bump our pointer "p". */
+
digits[0] += LOW_NIBBLE (*p);
if (byte_order == BFD_ENDIAN_BIG)
p++;
}
/* Ok, now "digits" is the decimal representation, with
- * the "decimal_digits" actual digits. Print!
- */
+ the "decimal_digits" actual digits. Print! */
+
for (i = decimal_digits - 1; i >= 0; i--)
{
fprintf_filtered (stream, "%1d", digits[i]);
}
}
-/* VALADDR points to a char integer of LEN bytes. Print it out in appropriate language form on stream.
+/* VALADDR points to a char integer of LEN bytes.
+ Print it out in appropriate language form on stream.
Omit any leading zero chars. */
void
}
}
-/* Assuming TYPE is a simple, non-empty array type, compute its upper
- and lower bound. Save the low bound into LOW_BOUND if not NULL.
- Save the high bound into HIGH_BOUND if not NULL.
-
- Return 1 if the operation was successful. Return zero otherwise,
- in which case the values of LOW_BOUND and HIGH_BOUNDS are unmodified.
-
- We now simply use get_discrete_bounds call to get the values
- of the low and high bounds.
- get_discrete_bounds can return three values:
- 1, meaning that index is a range,
- 0, meaning that index is a discrete type,
- or -1 for failure. */
-
-int
-get_array_bounds (struct type *type, LONGEST *low_bound, LONGEST *high_bound)
-{
- struct type *index = TYPE_INDEX_TYPE (type);
- LONGEST low = 0;
- LONGEST high = 0;
- int res;
-
- if (index == NULL)
- return 0;
-
- res = get_discrete_bounds (index, &low, &high);
- if (res == -1)
- return 0;
-
- if (low_bound)
- *low_bound = low;
-
- if (high_bound)
- *high_bound = high;
-
- return 1;
-}
-
/* Print on STREAM using the given OPTIONS the index for the element
at INDEX of an array whose index type is INDEX_TYPE. */
(FIXME?) Assumes array element separator is a comma, which is correct
for all languages currently handled.
(FIXME?) Some languages have a notation for repeated array elements,
- perhaps we should try to use that notation when appropriate.
- */
+ perhaps we should try to use that notation when appropriate. */
void
val_print_array_elements (struct type *type, const gdb_byte *valaddr,
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
- LONGEST low_bound_index = 0;
+ LONGEST low_bound, high_bound;
elttype = TYPE_TARGET_TYPE (type);
eltlen = TYPE_LENGTH (check_typedef (elttype));
index_type = TYPE_INDEX_TYPE (type);
- /* Compute the number of elements in the array. On most arrays,
- the size of its elements is not zero, and so the number of elements
- is simply the size of the array divided by the size of the elements.
- But for arrays of elements whose size is zero, we need to look at
- the bounds. */
- if (eltlen != 0)
- len = TYPE_LENGTH (type) / eltlen;
- else
+ if (get_array_bounds (type, &low_bound, &high_bound))
{
- LONGEST low, hi;
-
- if (get_array_bounds (type, &low, &hi))
- len = hi - low + 1;
+ /* The array length should normally be HIGH_BOUND - LOW_BOUND + 1.
+ But we have to be a little extra careful, because some languages
+ such as Ada allow LOW_BOUND to be greater than HIGH_BOUND for
+ empty arrays. In that situation, the array length is just zero,
+ not negative! */
+ if (low_bound > high_bound)
+ len = 0;
else
- {
- warning (_("unable to get bounds of array, assuming null array"));
- len = 0;
- }
+ len = high_bound - low_bound + 1;
}
-
- /* Get the array low bound. This only makes sense if the array
- has one or more element in it. */
- if (len > 0 && !get_array_bounds (type, &low_bound_index, NULL))
+ else
{
- warning (_("unable to get low bound of array, using zero as default"));
- low_bound_index = 0;
+ warning (_("unable to get bounds of array, assuming null array"));
+ low_bound = 0;
+ len = 0;
}
annotate_array_section_begin (i, elttype);
}
}
wrap_here (n_spaces (2 + 2 * recurse));
- maybe_print_array_index (index_type, i + low_bound_index,
+ maybe_print_array_index (index_type, i + low_bound,
stream, options);
rep1 = i + 1;
/* Read LEN bytes of target memory at address MEMADDR, placing the
results in GDB's memory at MYADDR. Returns a count of the bytes
actually read, and optionally an errno value in the location
- pointed to by ERRNOPTR if ERRNOPTR is non-null. */
+ pointed to by ERRNOPTR if ERRNOPTR is non-null. */
/* FIXME: cagney/1999-10-14: Only used by val_print_string. Can this
function be eliminated. */
static int
-partial_memory_read (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int *errnoptr)
+partial_memory_read (CORE_ADDR memaddr, gdb_byte *myaddr,
+ int len, int *errnoptr)
{
- int nread; /* Number of bytes actually read. */
- int errcode; /* Error from last read. */
+ int nread; /* Number of bytes actually read. */
+ int errcode; /* Error from last read. */
- /* First try a complete read. */
+ /* First try a complete read. */
errcode = target_read_memory (memaddr, myaddr, len);
if (errcode == 0)
{
- /* Got it all. */
+ /* Got it all. */
nread = len;
}
else
{
- /* Loop, reading one byte at a time until we get as much as we can. */
+ /* Loop, reading one byte at a time until we get as much as we can. */
for (errcode = 0, nread = 0; len > 0 && errcode == 0; nread++, len--)
{
errcode = target_read_memory (memaddr++, myaddr++, 1);
}
- /* If an error, the last read was unsuccessful, so adjust count. */
+ /* If an error, the last read was unsuccessful, so adjust count. */
if (errcode != 0)
{
nread--;
Note: There was a FIXME asking to make this code use target_read_string,
but this function is more general (can read past null characters, up to
- given LEN). Besides, it is used much more often than target_read_string
+ given LEN). Besides, it is used much more often than target_read_string
so it is more tested. Perhaps callers of target_read_string should use
this function instead? */
int errcode; /* Errno returned from bad reads. */
unsigned int nfetch; /* Chars to fetch / chars fetched. */
unsigned int chunksize; /* Size of each fetch, in chars. */
- gdb_byte *bufptr; /* Pointer to next available byte in buffer. */
+ gdb_byte *bufptr; /* Pointer to next available byte in
+ buffer. */
gdb_byte *limit; /* First location past end of fetch buffer. */
struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
stops at the first null byte, otherwise printing proceeds (including null
bytes) until either print_max or LEN characters have been printed,
- whichever is smaller. */
+ whichever is smaller. ENCODING is the name of the string's
+ encoding. It can be NULL, in which case the target encoding is
+ assumed. */
int
-val_print_string (struct type *elttype, CORE_ADDR addr, int len,
+val_print_string (struct type *elttype, const char *encoding,
+ CORE_ADDR addr, int len,
struct ui_file *stream,
const struct value_print_options *options)
{
int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
int errcode; /* Errno returned from bad reads. */
- int found_nul; /* Non-zero if we found the nul char */
+ int found_nul; /* Non-zero if we found the nul char. */
unsigned int fetchlimit; /* Maximum number of chars to print. */
int bytes_read;
gdb_byte *buffer = NULL; /* Dynamically growable fetch buffer. */
because finding the null byte (or available memory) is what actually
limits the fetch. */
- fetchlimit = (len == -1 ? options->print_max : min (len, options->print_max));
+ fetchlimit = (len == -1 ? options->print_max : min (len,
+ options->print_max));
errcode = read_string (addr, len, width, fetchlimit, byte_order,
&buffer, &bytes_read);
addr += bytes_read;
- /* We now have either successfully filled the buffer to fetchlimit, or
- terminated early due to an error or finding a null char when LEN is -1. */
+ /* We now have either successfully filled the buffer to fetchlimit,
+ or terminated early due to an error or finding a null char when
+ LEN is -1. */
/* Determine found_nul by looking at the last character read. */
found_nul = extract_unsigned_integer (buffer + bytes_read - width, width,
fputs_filtered (" ", stream);
}
LA_PRINT_STRING (stream, elttype, buffer, bytes_read / width,
- NULL, force_ellipsis, options);
+ encoding, force_ellipsis, options);
}
if (errcode != 0)
radix greater than 1, even if we don't have unique digits for every
value from 0 to radix-1, but in practice we lose on large radix values.
We should either fix the lossage or restrict the radix range more.
- (FIXME). */
+ (FIXME). */
if (radix < 2)
{
input_radix_1 = input_radix = radix;
if (from_tty)
{
- printf_filtered (_("Input radix now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input radix now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
set_output_radix_1 (int from_tty, unsigned radix)
{
/* Validate the radix and disallow ones that we aren't prepared to
- handle correctly, leaving the radix unchanged. */
+ handle correctly, leaving the radix unchanged. */
switch (radix)
{
case 16:
break;
default:
output_radix_1 = output_radix;
- error (_("Unsupported output radix ``decimal %u''; output radix unchanged."),
+ error (_("Unsupported output radix ``decimal %u''; "
+ "output radix unchanged."),
radix);
}
output_radix_1 = output_radix = radix;
if (from_tty)
{
- printf_filtered (_("Output radix now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Output radix now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
It may be useful to have an unusual input radix. If the user wishes to
set an input radix that is not valid as an output radix, he needs to use
- the 'set input-radix' command. */
+ the 'set input-radix' command. */
static void
set_radix (char *arg, int from_tty)
set_input_radix_1 (0, radix);
if (from_tty)
{
- printf_filtered (_("Input and output radices now set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input and output radices now set to "
+ "decimal %u, hex %x, octal %o.\n"),
radix, radix, radix);
}
}
-/* Show both the input and output radices. */
+/* Show both the input and output radices. */
static void
show_radix (char *arg, int from_tty)
{
if (input_radix == output_radix)
{
- printf_filtered (_("Input and output radices set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input and output radices set to "
+ "decimal %u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
}
else
{
- printf_filtered (_("Input radix set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Input radix set to decimal "
+ "%u, hex %x, octal %o.\n"),
input_radix, input_radix, input_radix);
- printf_filtered (_("Output radix set to decimal %u, hex %x, octal %o.\n"),
+ printf_filtered (_("Output radix set to decimal "
+ "%u, hex %x, octal %o.\n"),
output_radix, output_radix, output_radix);
}
}
_("Generic command for setting how things print."),
&setprintlist, "set print ", 0, &setlist);
add_alias_cmd ("p", "print", no_class, 1, &setlist);
- /* prefer set print to set prompt */
+ /* Prefer set print to set prompt. */
add_alias_cmd ("pr", "print", no_class, 1, &setlist);
add_prefix_cmd ("print", no_class, show_print,
they are like normal set and show commands but allow two normally
independent variables to be either set or shown with a single
command. So the usual deprecated_add_set_cmd() and [deleted]
- add_show_from_set() commands aren't really appropriate. */
+ add_show_from_set() commands aren't really appropriate. */
/* FIXME: i18n: With the new add_setshow_integer command, that is no
longer true - show can display anything. */
add_cmd ("radix", class_support, set_radix, _("\
projects / binutils.git / blobdiff