INSTALL = `cd $(srcdir)/..;pwd`/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
INSTALL_XFORM1 = $(INSTALL_XFORM) -b=.1
BISONFLAGS = -d
TEXI2ROFF=texi2roff
MAKEOVERRIDES=
-
+CC_FOR_BUILD = $(CC)
NM_FOR_TARGET = nm
NM = $(NM_FOR_TARGET)
SYMLINK = ln -s
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`
# Distribution version
-VERSION=cygnus-2.3.1
+VERSION=cygnus-2.4.1
# Distribution name
DIST_NAME=binutils-${VERSION}
# Where to find texinfo.tex to format docn with TeX
TEXIDIR = $(srcdir)/../texinfo
-MANPAGES= ar nm objdump ranlib size strings strip c++filt objcopy nlmconv
-
#CC=gcc -Wall
+CC=cc
# these two are almost the same program
AR_PROG=ar
RANLIB_PROG=ranlib
OBJDUMP_PROG=objdump
# This is the demangler, as a standalone program.
+# Note: This one is used as the installed name too, unlike the above.
DEMANGLER_PROG=c++filt
NLMCONV_PROG=nlmconv
-SRCONV_PROG=srconv sysdump coffdump
+SRCONV_PROG=srconv sysdump coffdump
+
+MANPAGES= ar nm objdump ranlib size strings strip objcopy nlmconv
-PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV) $(BUILD_SRCONV)
+PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(BUILD_NLMCONV) $(BUILD_SRCONV) $(SYSINFO_PROG)
STAGESTUFF = $(PROGS) *.o
# Files that can be generated, but should be in the distribution.
-DISTSTUFF=arparse.c arlex.c nlmheader.c info
+DISTSTUFF=arparse.c arlex.c nlmheader.c sysinfo.c syslex.c info
+
+# Stuff that goes in tooldir/ if appropriate
+TOOL_PROGS = nm.new strip.new ar ranlib
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
$(STRIP_PROG): $(ADDL_LIBS) objcopy.o is-strip.o $(BFD)
$(CC) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(ADDL_LIBS) $(EXTRALIBS)
-$(NM_PROG): $(ADDL_LIBS) nm.o demangle.o $(BFD)
- $(CC) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o demangle.o $(ADDL_LIBS) $(EXTRALIBS)
+$(NM_PROG): $(ADDL_LIBS) nm.o $(BFD)
+ $(CC) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS)
$(OBJDUMP_PROG): $(ADDL_LIBS) objdump.o $(BFD) $(OPCODES)
$(CC) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS)
-objdump.o: objdump.c config.status
- $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(ARCHDEFS) $(CFLAGS) $(srcdir)/objdump.c
-
-underscore.c:
- echo "int xxy_us_dummy;" >dummy.c
- $(CC) -c dummy.c
+underscore.c: Makefile
rm -f underscore.c
- echo '/*WARNING: This file is automatically generated!*/' >underscore.c
- if [ "`$(NM) dummy.o | grep _xxy_us_dummy ; true`" != "" ]; then \
- echo "int prepends_underscore = 1;" >>underscore.c; \
- else \
- echo "int prepends_underscore = 0;" >>underscore.c; \
- fi
- -rm -f dummy.c dummy.o
+ echo '/*WARNING: This file is automatically generated!*/' >underscore.t
+ echo "int prepends_underscore = $(UNDERSCORE);" >>underscore.t
+ mv -f underscore.t underscore.c
-version.o: version.c
+version.o: version.c Makefile
$(CC) $(INCLUDES) $(HDEFINES) $(TDEFINES) -DVERSION='"$(VERSION)"' $(CFLAGS) -c $(srcdir)/version.c
-demangle.o: $(BASEDIR)/libiberty/cplus-dem.c
- $(CC) -c $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
- mv cplus-dem.o demangle.o
-
-# For parallel compiling, depend on demangle.o so that one gets done first.
-cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h demangle.o
+cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
$(CC) -c -DMAIN $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c
$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o version.o
$(CC) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o version.o
-arparse.h arparse.c: arparse.y
+arparse.c: arparse.y
$(BISON) $(BISONFLAGS) $(srcdir)/arparse.y
- -mv y.tab.c arparse.c
- -mv y.tab.h arparse.h
+ mv -f y.tab.c arparse.c
+ mv -f y.tab.h arparse.h
+
+# Separate from arparse.c so that a parallel make doesn't try to build
+# both arparse.c and arparse.h simultaneously.
+arparse.h: arparse.c
arlex.c: arlex.l
$(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l
./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c
./sysinfo -i <$(srcdir)/sysroff.info >>sysroff.c
./sysinfo -g <$(srcdir)/sysroff.info >>sysroff.c
+
+sysroff.h: sysinfo sysroff.info
./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h
-sysinfo.c: sysinfo.y
+# Depend upon arparse.c to avoid building both arparse.c and sysinfo.c
+# simultaneously.
+sysinfo.c: sysinfo.y arparse.c
$(BISON) -tvd $(srcdir)/sysinfo.y
rm -f sysinfo.c
- -mv y.tab.c sysinfo.c
+ mv -f y.tab.c sysinfo.c
+ mv -f y.tab.h sysinfo.h
+
+# Separate from sysinfo.c so that a parallel make doesn't try to build
+# both sysinfo.c and sysinfo.h simultaneously.
+sysinfo.h: sysinfo.c
syslex.c : syslex.l
$(LEX) $(LEX_OPTIONS) $(srcdir)/syslex.l
mv lex.yy.c syslex.c
-sysinfo: sysinfo.o syslex.o $(ADDL_LIBS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o $(ADDL_LIBS) $(EXTRALIBS)
+sysinfo: sysinfo.o syslex.o
+ $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o
-srconv: sysroff.c srconv.o sysroff.c coffgrok.o $(ADDL_LIBS)
+syslex.o: syslex.c sysinfo.h
+ if [ -r syslex.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/syslex.c ;\
+ fi
+
+sysinfo.o: sysinfo.c
+ if [ -r sysinfo.c ]; then \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \
+ else \
+ $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
+ fi
+
+srconv.o: srconv.c sysroff.h sysroff.c coffgrok.h $(INCDIR)/coff/internal.h \
+ ../bfd/libcoff.h
+
+srconv: srconv.o coffgrok.o $(ADDL_LIBS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
coffdump: coffdump.o coffgrok.o $(ADDL_LIBS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS)
-sysdump: sysroff.c sysdump.o $(ADDL_LIBS)
+sysdump.o: sysdump.c sysroff.h
+
+sysdump: sysdump.o $(ADDL_LIBS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS)
-nlmheader.c: nlmheader.y
+# Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c
+# simultaneously.
+nlmheader.c: nlmheader.y sysinfo.c
$(BISON) $(srcdir)/nlmheader.y
rm -f nlmheader.c
- -mv y.tab.c nlmheader.c
+ mv -f y.tab.c nlmheader.c
nlmconv.o: nlmconv.c
- ldname=`t='$(program_transform_name)'; echo ld | sed -e "" $$t`; \
- $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(CFLAGS) $(srcdir)/nlmconv.c
+ ldname=`t='$(program_transform_name)'; echo ld | sed -e "s/brokensed/brokensed/" $$t`; \
+ $(CC) -c -DLD_NAME="\"$${ldname}\"" $(INCLUDES) $(HDEFINES) $(TDEFINES) $(NLMCONV_DEFS) $(CFLAGS) $(srcdir)/nlmconv.c
$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_LIBS) $(BFD)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS)
is-strip.o: is-strip.c
is-ranlib.o: is-ranlib.c
not-strip.o: not-strip.c
-nlmheader.o: nlmheader.c nlmconv.h $(INCDIR)/nlm/common.h \
- $(INCDIR)/nlm/internal.h
-nlmconv.o: $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
- $(BFDDIR)/libnlm.h bucomm.h
+nlmheader.o: nlmheader.c ../bfd/bfd.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h nlmconv.h
+nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/libiberty.h ../bfd/sysdep.h \
+ $(BFDDIR)/hosts/std-host.h $(INCDIR)/fopen-same.h bucomm.h \
+ $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h \
+ $(INCDIR)/nlm/internal.h $(INCDIR)/nlm/external.h nlmconv.h \
+ $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
stage1: force
- mkdir stage1
binutils.info: $(srcdir)/binutils.texi
$(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi
+$(DEMANGLER_PROG).1: cxxfilt.man Makefile
+ sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
+ > $(DEMANGLER_PROG).1
+
# different targets for -ms, -mm, -me
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
@if [ -d testsuite ] ; then \
cd testsuite ; $(MAKE) $(FLAGS_TO_PASS) distclean ; \
else true; fi
- -rm -f Makefile config.status sysdep.h *.o *~ \#* core \
+ -rm -f Makefile config.status sysdep.h *.o *~ \#* core y.* \
binutils.?? binutils.??s binutils.aux binutils.log binutils.toc
+ -rm -f $(PROGS) underscore.c
realclean: clean distclean
-rm -f $(DISTSTUFF) TAGS
TAGS: force
etags $(INCDIR)/*.h $(srcdir)/*.[hc]
-install: all
+install: all $(DEMANGLER_PROG).1
for i in $(PROGS) ; do \
$(INSTALL_XFORM) $$i $(bindir)/`echo $$i | sed -e 's/.new//'` ; \
done
for i in $(MANPAGES) ; do \
$(INSTALL_XFORM1) $(srcdir)/$$i.1 $(man1dir)/$$i.1 ; \
done
+ $(INSTALL_XFORM1) $(DEMANGLER_PROG).1 $(man1dir)/$(DEMANGLER_PROG).1
-if [ -d $(tooldir) ]; then \
- if [ -d $(tooldir)/bin ] ; then true ; else mkdir $(tooldir)/bin ; fi; \
- for i in nm.new strip.new ar ranlib; do \
- rm -f $(tooldir)/bin/$$i; \
- ln $(bindir)/`t='$(program_transform_name)'; echo $$i | sed -e "s/.new//" $$t` $(tooldir)/bin/`echo $$i | sed -e 's/.new//'` \
- || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$i; \
- done; \
- else true; fi
-
-# Use binutils.info as the target so that VPATH will DTRT.
-# (Use "$<*" in case the output is multiple files, though.)
+ if [ -d $(tooldir)/bin ]; then true; else mkdir $(tooldir)/bin; fi; \
+ for i in $(TOOL_PROGS) ; do \
+ j=`echo $$i | sed -e 's/.new//'`; \
+ rm -f $(tooldir)/bin/$$j; \
+ k=`t='$(program_transform_name)'; echo $$j | sed -e s/x/x/ $$t`; \
+ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \
+ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \
+ done; \
+ else true; fi
+
+# This little path search is required because in the FSF net releases,
+# the info files are included in the source tree, and that may not be
+# the same as the build directory.
install-info: binutils.info
- for i in $<* ; do \
+ if [ -r binutils.info ]; then \
+ dir=. ; \
+ else \
+ dir=$(srcdir) ; \
+ fi ; \
+ for i in `cd $$dir; echo binutils.info*` ; do \
$(INSTALL_DATA) $$i $(infodir)/$$i ; \
done
projects / binutils.git / blobdiff