[binutils.git] / ld / scripttempl / elf.sc

#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to 0)
#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#		empty.
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	INITIAL_READONLY_SECTIONS - at start of text segment
#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#		(e.g., .PARISC.milli)
#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
#	OTHER_GOT_SECTIONS - sections just after .got.
#	OTHER_SDATA_SECTIONS - sections just after .sdata.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	DATA_PLT - .plt should be in data segment, not text segment.
#	BSS_PLT - .plt should be in bss segment
#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#	EMBEDDED - whether this is for an embedded system. 
#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#		start address of shared library.
#	INPUT_FILES - INPUT command of files to always include
#	WRITABLE_RODATA - if set, the .rodata section should be writable
#	INIT_START, INIT_END -  statements just before and just after
# 	combination of .init sections.
#	FINI_START, FINI_END - statements just before and just after
# 	combination of .fini sections.
#	STACK_ADDR - start of a .stack section.
#	OTHER_END_SYMBOLS - symbols to place right at the end of the script.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#

#  Many sections come in three flavours.  There is the 'real' section,
#  like ".data".  Then there are the per-procedure or per-variable
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  and useful for --gc-sections, which for a variable "foo" might be
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  The exact correspondences are:
#
#  Section	Linkonce section
#  .text	.gnu.linkonce.t.foo
#  .rodata	.gnu.linkonce.r.foo
#  .data	.gnu.linkonce.d.foo
#  .bss		.gnu.linkonce.b.foo
#  .sdata	.gnu.linkonce.s.foo
#  .sbss	.gnu.linkonce.sb.foo
#  .sdata2	.gnu.linkonce.s2.foo
#  .sbss2	.gnu.linkonce.sb2.foo
#  .debug_info	.gnu.linkonce.wi.foo
#  .tdata	.gnu.linkonce.td.foo
#  .tbss	.gnu.linkonce.tb.foo
#
#  Each of these can also have corresponding .rel.* and .rela.* sections.

test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
fi
INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
test -z "$GOT" && GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
if test -z "${NO_SMALL_DATA}"; then
  SBSS=".sbss         ${RELOCATING-0} :
  {
    ${RELOCATING+PROVIDE (__sbss_start = .);}
    ${RELOCATING+PROVIDE (___sbss_start = .);}
    *(.dynsbss)
    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
    *(.scommon)
    ${RELOCATING+PROVIDE (__sbss_end = .);}
    ${RELOCATING+PROVIDE (___sbss_end = .);}
  }"
  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  SDATA="/* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata        ${RELOCATING-0} : 
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  }"
  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
fi
CTOR=".ctors        ${CONSTRUCTING-0} : 
  {
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */

    KEEP (*crtbegin*.o(.ctors))

    /* We don't want to include the .ctor section from
       from the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */

    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
  }"
DTOR=".dtors        ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin*.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
  }"
STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
  {
    ${RELOCATING+_stack = .;}
    *(.stack)
  }"

# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi

cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
ENTRY(${ENTRY})

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}

SECTIONS
{
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB-${INTERP}}
  ${INITIAL_READONLY_SECTIONS}
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash         ${RELOCATING-0} : { *(.hash) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }

EOF
if [ "x$COMBRELOC" = x ]; then
  COMBRELOCCAT=cat
else
  COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  ${OTHER_GOT_RELOC_SECTIONS}
  ${REL_SDATA}
  ${REL_SBSS}
  ${REL_SDATA2}
  ${REL_SBSS2}
  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
  .rel.dyn      ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
cat <<EOF
    }
  .rela.dyn     ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
cat <<EOF
    }
EOF
fi
cat <<EOF
  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
  ${OTHER_PLT_RELOC_SECTIONS}

  .init         ${RELOCATING-0} : 
  { 
    ${RELOCATING+${INIT_START}}
    KEEP (*(.init))
    ${RELOCATING+${INIT_END}}
  } =${NOP-0}

  ${DATA_PLT-${BSS_PLT-${PLT}}}
  .text         ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
  } =${NOP-0}
  .fini         ${RELOCATING-0} :
  {
    ${RELOCATING+${FINI_START}}
    KEEP (*(.fini))
    ${RELOCATING+${FINI_END}}
  } =${NOP-0}
  ${RELOCATING+PROVIDE (__etext = .);}
  ${RELOCATING+PROVIDE (_etext = .);}
  ${RELOCATING+PROVIDE (etext = .);}
  ${WRITABLE_RODATA-${RODATA}}
  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${OTHER_READONLY_SECTIONS}
  .eh_frame_hdr : { *(.eh_frame_hdr) }

  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}

  /* Ensure the __preinit_array_start label is properly aligned.  We
     could instead move the label definition inside the section, but
     the linker would then create the section even if it turns out to
     be empty, which isn't pretty.  */
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
  .preinit_array   ${RELOCATING-0} : { *(.preinit_array) }
  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}

  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
  .init_array   ${RELOCATING-0} : { *(.init_array) }
  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}

  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
  .fini_array   ${RELOCATING-0} : { *(.fini_array) }
  ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}

  .data         ${RELOCATING-0} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }
  .data1        ${RELOCATING-0} : { *(.data1) }
  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
  .eh_frame     ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
  ${WRITABLE_RODATA+${RODATA}}
  ${OTHER_READWRITE_SECTIONS}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${RELOCATING+${CTOR}}
  ${RELOCATING+${DTOR}}
  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
  ${DATA_PLT+${PLT}}
  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
  ${GOT}
  ${OTHER_GOT_SECTIONS}
  ${CREATE_SHLIB+${SDATA2}}
  ${CREATE_SHLIB+${SBSS2}}
  ${SDATA}
  ${OTHER_SDATA_SECTIONS}
  ${RELOCATING+_edata = .;}
  ${RELOCATING+PROVIDE (edata = .);}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  ${SBSS}
  ${BSS_PLT+${PLT}}
  .bss          ${RELOCATING-0} :
  {
   *(.dynbss)
   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.  */
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  }
  ${OTHER_BSS_SECTIONS}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+_end = .;}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+PROVIDE (end = .);}
  ${RELOCATING+${DATA_SEGMENT_END}}

  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment       0 : { *(.comment) }

  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */

  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }

  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }

  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }

  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }

  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }

  ${STACK_ADDR+${STACK}}
  ${OTHER_SECTIONS}
  ${RELOCATING+${OTHER_END_SYMBOLS}}
  ${RELOCATING+${STACKNOTE}}
}
EOF
Commit	Line	Data
252b5132 RH	1	#
252b5132 RH	2	# Unusual variables checked by this code:
563e308f	3	# NOP - four byte opcode for no-op (defaults to 0)
48459341 L	4	# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
48459341 L	5	# empty.
252b5132 RH	6	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	7	# INITIAL_READONLY_SECTIONS - at start of text segment
	8	# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
	9	# (e.g., .PARISC.milli)
	10	# OTHER_TEXT_SECTIONS - these get put in .text when relocating
	11	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	12	# (e.g., .PARISC.global)
904ecb2d	13	# OTHER_BSS_SECTIONS - other than .bss .sbss ...
252b5132 RH	14	# OTHER_SECTIONS - at the end
	15	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	16	# executable (e.g., _DYNAMIC_LINK)
	17	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	18	# .text section.
	19	# DATA_START_SYMBOLS - symbols that appear at the start of the
	20	# .data section.
	21	# OTHER_GOT_SYMBOLS - symbols defined just before .got.
5253f23b AM	22	# OTHER_GOT_SECTIONS - sections just after .got.
5253f23b AM	23	# OTHER_SDATA_SECTIONS - sections just after .sdata.
252b5132 RH	24	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	25	# .bss section besides __bss_start.
	26	# DATA_PLT - .plt should be in data segment, not text segment.
6c86c541	27	# BSS_PLT - .plt should be in bss segment
252b5132 RH	28	# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
	29	# EMBEDDED - whether this is for an embedded system.
	30	# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
	31	# start address of shared library.
	32	# INPUT_FILES - INPUT command of files to always include
a8e53fb0	33	# WRITABLE_RODATA - if set, the .rodata section should be writable
904ecb2d JL	34	# INIT_START, INIT_END - statements just before and just after
	35	# combination of .init sections.
	36	# FINI_START, FINI_END - statements just before and just after
	37	# combination of .fini sections.
465bc359 AM	38	# STACK_ADDR - start of a .stack section.
465bc359 AM	39	# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
252b5132 RH	40	#
	41	# When adding sections, do note that the names of some sections are used
	42	# when specifying the start address of the next.
	43	#
	44
d73e9da0 AS	45	# Many sections come in three flavours. There is the 'real' section,
	46	# like ".data". Then there are the per-procedure or per-variable
	47	# sections, generated by -ffunction-sections and -fdata-sections in GCC,
	48	# and useful for --gc-sections, which for a variable "foo" might be
	49	# ".data.foo". Then there are the linkonce sections, for which the linker
	50	# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
	51	# The exact correspondences are:
	52	#
	53	# Section Linkonce section
	54	# .text .gnu.linkonce.t.foo
	55	# .rodata .gnu.linkonce.r.foo
	56	# .data .gnu.linkonce.d.foo
	57	# .bss .gnu.linkonce.b.foo
	58	# .sdata .gnu.linkonce.s.foo
	59	# .sbss .gnu.linkonce.sb.foo
	60	# .sdata2 .gnu.linkonce.s2.foo
	61	# .sbss2 .gnu.linkonce.sb2.foo
465bc359	62	# .debug_info .gnu.linkonce.wi.foo
13ae64f3 JJ	63	# .tdata .gnu.linkonce.td.foo
13ae64f3 JJ	64	# .tbss .gnu.linkonce.tb.foo
d73e9da0 AS	65	#
d73e9da0 AS	66	# Each of these can also have corresponding .rel.* and .rela.* sections.
9ac4db9c	67
252b5132 RH	68	test -z "$ENTRY" && ENTRY=_start
	69	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	70	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	71	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	72	test -z "${ELFSIZE}" && ELFSIZE=32
	73	test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
	74	test "$LD_FLAG" = "N" && DATA_ADDR=.
9203ba99 JJ	75	test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
9203ba99 JJ	76	test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
1ddd7b13	77	DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
2d13d8c5 JJ	78	DATA_SEGMENT_END=""
2d13d8c5 JJ	79	if test -n "${COMMONPAGESIZE}"; then
1ddd7b13	80	DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
2d13d8c5	81	DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
2d20f7bf	82	fi
465bc359 AM	83	INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
465bc359 AM	84	PLT=".plt ${RELOCATING-0} : { *(.plt) }"
68f8ff14	85	test -z "$GOT" && GOT=".got ${RELOCATING-0} : { (.got.plt) (.got) }"
465bc359 AM	86	DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
465bc359 AM	87	RODATA=".rodata ${RELOCATING-0} : { (.rodata${RELOCATING+ .rodata. .gnu.linkonce.r.*}) }"
9ee5e499	88	STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
48459341 L	89	if test -z "${NO_SMALL_DATA}"; then
	90	SBSS=".sbss ${RELOCATING-0} :
	91	{
	92	${RELOCATING+PROVIDE (__sbss_start = .);}
	93	${RELOCATING+PROVIDE (___sbss_start = .);}
	94	*(.dynsbss)
	95	(.sbss${RELOCATING+ .sbss. .gnu.linkonce.sb.*})
	96	*(.scommon)
	97	${RELOCATING+PROVIDE (__sbss_end = .);}
	98	${RELOCATING+PROVIDE (___sbss_end = .);}
	99	}"
	100	SBSS2=".sbss2 ${RELOCATING-0} : { (.sbss2${RELOCATING+ .sbss2. .gnu.linkonce.sb2.*}) }"
	101	SDATA="/* We want the small data sections together, so single-instruction offsets
	102	can access them all, and initialized data all before uninitialized, so
	103	we can shorten the on-disk segment size. */
	104	.sdata ${RELOCATING-0} :
	105	{
	106	${RELOCATING+${SDATA_START_SYMBOLS}}
	107	(.sdata${RELOCATING+ .sdata. .gnu.linkonce.s.*})
	108	}"
	109	SDATA2=".sdata2 ${RELOCATING-0} : { (.sdata2${RELOCATING+ .sdata2. .gnu.linkonce.s2.*}) }"
	110	REL_SDATA=".rel.sdata ${RELOCATING-0} : { (.rel.sdata${RELOCATING+ .rel.sdata. .rel.gnu.linkonce.s.*}) }
	111	.rela.sdata ${RELOCATING-0} : { (.rela.sdata${RELOCATING+ .rela.sdata. .rela.gnu.linkonce.s.*}) }"
	112	REL_SBSS=".rel.sbss ${RELOCATING-0} : { (.rel.sbss${RELOCATING+ .rel.sbss. .rel.gnu.linkonce.sb.*}) }
	113	.rela.sbss ${RELOCATING-0} : { (.rela.sbss${RELOCATING+ .rela.sbss. .rela.gnu.linkonce.sb.*}) }"
	114	REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { (.rel.sdata2${RELOCATING+ .rel.sdata2. .rel.gnu.linkonce.s2.*}) }
	115	.rela.sdata2 ${RELOCATING-0} : { (.rela.sdata2${RELOCATING+ .rela.sdata2. .rela.gnu.linkonce.s2.*}) }"
	116	REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { (.rel.sbss2${RELOCATING+ .rel.sbss2. .rel.gnu.linkonce.sb2.*}) }
	117	.rela.sbss2 ${RELOCATING-0} : { (.rela.sbss2${RELOCATING+ .rela.sbss2. .rela.gnu.linkonce.sb2.*}) }"
	118	fi
465bc359	119	CTOR=".ctors ${CONSTRUCTING-0} :
252b5132 RH	120	{
	121	${CONSTRUCTING+${CTOR_START}}
	122	/* gcc uses crtbegin.o to find the start of
	123	the constructors, so we make sure it is
	124	first. Because this is a wildcard, it
	125	doesn't matter if the user does not
	126	actually link against crtbegin.o; the
	127	linker won't look for a file to match a
	128	wildcard. The wildcard also means that it
	129	doesn't matter which directory crtbegin.o
	130	is in. */
	131
877d60f7	132	KEEP (crtbegin.o(.ctors))
252b5132 RH	133
	134	/* We don't want to include the .ctor section from
	135	from the crtend.o file until after the sorted ctors.
	136	The .ctor section from the crtend file contains the
	137	end of ctors marker and it must be last */
	138
877d60f7	139	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
252b5132 RH	140	KEEP ((SORT(.ctors.)))
	141	KEEP (*(.ctors))
	142	${CONSTRUCTING+${CTOR_END}}
	143	}"
465bc359	144	DTOR=".dtors ${CONSTRUCTING-0} :
252b5132 RH	145	{
252b5132 RH	146	${CONSTRUCTING+${DTOR_START}}
877d60f7 AM	147	KEEP (crtbegin.o(.dtors))
877d60f7 AM	148	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
252b5132 RH	149	KEEP ((SORT(.dtors.)))
	150	KEEP (*(.dtors))
	151	${CONSTRUCTING+${DTOR_END}}
	152	}"
465bc359 AM	153	STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
	154	{
	155	${RELOCATING+_stack = .;}
	156	*(.stack)
	157	}"
252b5132 RH	158
	159	# if this is for an embedded system, don't add SIZEOF_HEADERS.
	160	if [ -z "$EMBEDDED" ]; then
	161	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
	162	else
	163	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
	164	fi
	165
	166	cat <<EOF
	167	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	168	"${LITTLE_OUTPUT_FORMAT}")
	169	OUTPUT_ARCH(${OUTPUT_ARCH})
	170	ENTRY(${ENTRY})
	171
	172	${RELOCATING+${LIB_SEARCH_DIRS}}
	173	${RELOCATING+/* Do we need any of these for elf?
	174	__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
	175	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	176	${RELOCATING+${INPUT_FILES}}
	177	${RELOCATING- /* For some reason, the Solaris linker makes bad executables
	178	if gld -r is used and the intermediate file has sections starting
	179	at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
	180	bug. But for now assigning the zero vmas works. */}
	181
	182	SECTIONS
	183	{
	184	/* Read-only sections, merged into text segment: */
36af4a4e	185	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}}
252b5132	186	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
36af4a4e	187	${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
252b5132 RH	188	${CREATE_SHLIB-${INTERP}}
	189	${INITIAL_READONLY_SECTIONS}
	190	${TEXT_DYNAMIC+${DYNAMIC}}
465bc359 AM	191	.hash ${RELOCATING-0} : { *(.hash) }
	192	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	193	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	194	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	195	.gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
	196	.gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
9e4141bc	197
db6751f2 JJ	198	EOF
	199	if [ "x$COMBRELOC" = x ]; then
	200	COMBRELOCCAT=cat
	201	else
	202	COMBRELOCCAT="cat > $COMBRELOC"
	203	fi
	204	eval $COMBRELOCCAT <<EOF
465bc359 AM	205	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	206	.rela.init ${RELOCATING-0} : { *(.rela.init) }
	207	.rel.text ${RELOCATING-0} : { (.rel.text${RELOCATING+ .rel.text. .rel.gnu.linkonce.t.*}) }
	208	.rela.text ${RELOCATING-0} : { (.rela.text${RELOCATING+ .rela.text. .rela.gnu.linkonce.t.*}) }
	209	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
	210	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
	211	.rel.rodata ${RELOCATING-0} : { (.rel.rodata${RELOCATING+ .rel.rodata. .rel.gnu.linkonce.r.*}) }
	212	.rela.rodata ${RELOCATING-0} : { (.rela.rodata${RELOCATING+ .rela.rodata. .rela.gnu.linkonce.r.*}) }
9e4141bc	213	${OTHER_READONLY_RELOC_SECTIONS}
465bc359 AM	214	.rel.data ${RELOCATING-0} : { (.rel.data${RELOCATING+ .rel.data. .rel.gnu.linkonce.d.*}) }
465bc359 AM	215	.rela.data ${RELOCATING-0} : { (.rela.data${RELOCATING+ .rela.data. .rela.gnu.linkonce.d.*}) }
13ae64f3 JJ	216	.rel.tdata ${RELOCATING-0} : { (.rel.tdata${RELOCATING+ .rel.tdata. .rel.gnu.linkonce.td.*}) }
	217	.rela.tdata ${RELOCATING-0} : { (.rela.tdata${RELOCATING+ .rela.tdata. .rela.gnu.linkonce.td.*}) }
	218	.rel.tbss ${RELOCATING-0} : { (.rel.tbss${RELOCATING+ .rel.tbss. .rel.gnu.linkonce.tb.*}) }
	219	.rela.tbss ${RELOCATING-0} : { (.rela.tbss${RELOCATING+ .rela.tbss. .rela.gnu.linkonce.tb.*}) }
465bc359 AM	220	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	221	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	222	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	223	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
	224	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	225	.rela.got ${RELOCATING-0} : { *(.rela.got) }
9e4141bc	226	${OTHER_GOT_RELOC_SECTIONS}
48459341 L	227	${REL_SDATA}
	228	${REL_SBSS}
	229	${REL_SDATA2}
	230	${REL_SBSS2}
465bc359 AM	231	.rel.bss ${RELOCATING-0} : { (.rel.bss${RELOCATING+ .rel.bss. .rel.gnu.linkonce.b.*}) }
465bc359 AM	232	.rela.bss ${RELOCATING-0} : { (.rela.bss${RELOCATING+ .rela.bss. .rela.gnu.linkonce.b.*}) }
db6751f2 JJ	233	EOF
	234	if [ -n "$COMBRELOC" ]; then
	235	cat <<EOF
465bc359	236	.rel.dyn ${RELOCATING-0} :
db6751f2 JJ	237	{
	238	EOF
	239	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rela\./d;s/^.: { \(.\)}$/ \1/' $COMBRELOC
	240	cat <<EOF
	241	}
465bc359	242	.rela.dyn ${RELOCATING-0} :
db6751f2 JJ	243	{
	244	EOF
	245	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rel\./d;s/^.: { \(.\)}/ \1/' $COMBRELOC
	246	cat <<EOF
	247	}
	248	EOF
	249	fi
	250	cat <<EOF
465bc359 AM	251	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
465bc359 AM	252	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
9e673ad1	253	${OTHER_PLT_RELOC_SECTIONS}
9e4141bc	254
465bc359	255	.init ${RELOCATING-0} :
4ab10e93	256	{
53db15ed	257	${RELOCATING+${INIT_START}}
4ab10e93	258	KEEP (*(.init))
53db15ed	259	${RELOCATING+${INIT_END}}
4ab10e93 GK	260	} =${NOP-0}
4ab10e93 GK	261
6c86c541	262	${DATA_PLT-${BSS_PLT-${PLT}}}
465bc359	263	.text ${RELOCATING-0} :
252b5132 RH	264	{
252b5132 RH	265	${RELOCATING+${TEXT_START_SYMBOLS}}
465bc359	266	(.text .stub${RELOCATING+ .text. .gnu.linkonce.t.*})
252b5132 RH	267	/* .gnu.warning sections are handled specially by elf32.em. */
252b5132 RH	268	*(.gnu.warning)
252b5132 RH	269	${RELOCATING+${OTHER_TEXT_SECTIONS}}
252b5132 RH	270	} =${NOP-0}
465bc359	271	.fini ${RELOCATING-0} :
904ecb2d	272	{
53db15ed	273	${RELOCATING+${FINI_START}}
904ecb2d	274	KEEP (*(.fini))
53db15ed	275	${RELOCATING+${FINI_END}}
904ecb2d	276	} =${NOP-0}
6c86c541 GK	277	${RELOCATING+PROVIDE (__etext = .);}
	278	${RELOCATING+PROVIDE (_etext = .);}
	279	${RELOCATING+PROVIDE (etext = .);}
a8e53fb0	280	${WRITABLE_RODATA-${RODATA}}
465bc359	281	.rodata1 ${RELOCATING-0} : { *(.rodata1) }
6c86c541 GK	282	${CREATE_SHLIB-${SDATA2}}
6c86c541 GK	283	${CREATE_SHLIB-${SBSS2}}
465bc359	284	${OTHER_READONLY_SECTIONS}
65765700	285	.eh_frame_hdr : { *(.eh_frame_hdr) }
252b5132 RH	286
	287	/* Adjust the address for the data segment. We want to adjust up to
	288	the same address within the page on the next page up. */
9203ba99	289	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
2d20f7bf	290	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
9203ba99	291	${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
252b5132	292
b5090659 L	293	/* Ensure the __preinit_array_start label is properly aligned. We
	294	could instead move the label definition inside the section, but
	295	the linker would then create the section even if it turns out to
	296	be empty, which isn't pretty. */
	297	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	298	${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
	299	.preinit_array ${RELOCATING-0} : { *(.preinit_array) }
	300	${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
	301
	302	${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
	303	.init_array ${RELOCATING-0} : { *(.init_array) }
	304	${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
	305
	306	${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
	307	.fini_array ${RELOCATING-0} : { *(.fini_array) }
	308	${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
	309
465bc359	310	.data ${RELOCATING-0} :
252b5132 RH	311	{
252b5132 RH	312	${RELOCATING+${DATA_START_SYMBOLS}}
465bc359	313	(.data${RELOCATING+ .data. .gnu.linkonce.d.*})
252b5132 RH	314	${CONSTRUCTING+SORT(CONSTRUCTORS)}
252b5132 RH	315	}
465bc359	316	.data1 ${RELOCATING-0} : { *(.data1) }
13ae64f3	317	.tdata ${RELOCATING-0} : { (.tdata${RELOCATING+ .tdata. .gnu.linkonce.td.*}) }
f13a5424	318	.tbss ${RELOCATING-0} : { (.tbss${RELOCATING+ .tbss. .gnu.linkonce.tb.})${RELOCATING+ (.tcommon)} }
465bc359 AM	319	.eh_frame ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
465bc359 AM	320	.gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
a8e53fb0	321	${WRITABLE_RODATA+${RODATA}}
465bc359	322	${OTHER_READWRITE_SECTIONS}
5253f23b	323	${TEXT_DYNAMIC-${DYNAMIC}}
252b5132 RH	324	${RELOCATING+${CTOR}}
252b5132 RH	325	${RELOCATING+${DTOR}}
465bc359	326	.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
252b5132 RH	327	${DATA_PLT+${PLT}}
252b5132 RH	328	${RELOCATING+${OTHER_GOT_SYMBOLS}}
68f8ff14	329	${GOT}
465bc359	330	${OTHER_GOT_SECTIONS}
6c86c541 GK	331	${CREATE_SHLIB+${SDATA2}}
6c86c541 GK	332	${CREATE_SHLIB+${SBSS2}}
48459341	333	${SDATA}
465bc359	334	${OTHER_SDATA_SECTIONS}
9e4141bc	335	${RELOCATING+_edata = .;}
252b5132 RH	336	${RELOCATING+PROVIDE (edata = .);}
	337	${RELOCATING+__bss_start = .;}
	338	${RELOCATING+${OTHER_BSS_SYMBOLS}}
48459341	339	${SBSS}
6c86c541	340	${BSS_PLT+${PLT}}
465bc359	341	.bss ${RELOCATING-0} :
252b5132 RH	342	{
252b5132 RH	343	*(.dynbss)
465bc359	344	(.bss${RELOCATING+ .bss. .gnu.linkonce.b.*})
252b5132 RH	345	*(COMMON)
	346	/* Align here to ensure that the .bss section occupies space up to
	347	_end. Align after .bss to ensure correct alignment even if the
	348	.bss section disappears because there are no input sections. */
	349	${RELOCATING+. = ALIGN(${ALIGNMENT});}
	350	}
465bc359	351	${OTHER_BSS_SECTIONS}
252b5132	352	${RELOCATING+. = ALIGN(${ALIGNMENT});}
9e4141bc	353	${RELOCATING+_end = .;}
252b5132 RH	354	${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
252b5132 RH	355	${RELOCATING+PROVIDE (end = .);}
2d13d8c5	356	${RELOCATING+${DATA_SEGMENT_END}}
252b5132 RH	357
252b5132 RH	358	/* Stabs debugging sections. */
465bc359 AM	359	.stab 0 : { *(.stab) }
	360	.stabstr 0 : { *(.stabstr) }
	361	.stab.excl 0 : { *(.stab.excl) }
	362	.stab.exclstr 0 : { *(.stab.exclstr) }
	363	.stab.index 0 : { *(.stab.index) }
252b5132 RH	364	.stab.indexstr 0 : { *(.stab.indexstr) }
252b5132 RH	365
465bc359	366	.comment 0 : { *(.comment) }
252b5132 RH	367
	368	/* DWARF debug sections.
	369	Symbols in the DWARF debugging sections are relative to the beginning
	370	of the section so we begin them at 0. */
	371
	372	/* DWARF 1 */
	373	.debug 0 : { *(.debug) }
	374	.line 0 : { *(.line) }
	375
	376	/* GNU DWARF 1 extensions */
	377	.debug_srcinfo 0 : { *(.debug_srcinfo) }
	378	.debug_sfnames 0 : { *(.debug_sfnames) }
	379
	380	/* DWARF 1.1 and DWARF 2 */
	381	.debug_aranges 0 : { *(.debug_aranges) }
	382	.debug_pubnames 0 : { *(.debug_pubnames) }
	383
	384	/* DWARF 2 */
465bc359	385	.debug_info 0 : { (.debug_info .gnu.linkonce.wi.) }
252b5132 RH	386	.debug_abbrev 0 : { *(.debug_abbrev) }
	387	.debug_line 0 : { *(.debug_line) }
	388	.debug_frame 0 : { *(.debug_frame) }
	389	.debug_str 0 : { *(.debug_str) }
	390	.debug_loc 0 : { *(.debug_loc) }
	391	.debug_macinfo 0 : { *(.debug_macinfo) }
	392
	393	/* SGI/MIPS DWARF 2 extensions */
	394	.debug_weaknames 0 : { *(.debug_weaknames) }
	395	.debug_funcnames 0 : { *(.debug_funcnames) }
	396	.debug_typenames 0 : { *(.debug_typenames) }
	397	.debug_varnames 0 : { *(.debug_varnames) }
	398
465bc359	399	${STACK_ADDR+${STACK}}
252b5132	400	${OTHER_SECTIONS}
465bc359	401	${RELOCATING+${OTHER_END_SYMBOLS}}
9ee5e499	402	${RELOCATING+${STACKNOTE}}
252b5132 RH	403	}
252b5132 RH	404	EOF