[binutils.git] / gdb / nlm / configure.in

srcname="Remote GDB server for Netware"
srctrigger=gdbserve.c

# per-host:

# Map host cpu into the config cpu subdirectory name.
# The default is $host_cpu.

case "${host_cpu}" in

alpha)			gdb_host_cpu=alpha ;;
c[12])			gdb_host_cpu=convex ;;
hppa*)			gdb_host_cpu=pa ;;
i[34]86)		gdb_host_cpu=i386 ;;
m68*)			gdb_host_cpu=m68k ;;
np1)			gdb_host_cpu=gould ;;
pyramid)		gdb_host_cpu=pyr ;;
*)			gdb_host_cpu=$target_cpu ;;

esac

# map host info into gdb names.

case "${host}" in

a29k-*-*)		gdb_host=ultra3 ;;
alpha-*-osf*)		gdb_host=alpha-osf1 ;;

arm-*-*)		gdb_host=arm ;;

c[12]-*-*)		gdb_host=convex ;;

hppa*-hp-bsd*)		gdb_host=hppabsd ;;
hppa*-hp-hpux*)		gdb_host=hppahpux ;;

i[34]86-ncr-*)		gdb_host=ncr3000 ;;
i[34]86-sequent-*)	gdb_host=symmetry ;;

i[34]86-*-bsd*)		gdb_host=i386bsd ;;
i[34]86-*-lynxos*)	gdb_host=i386lynx ;;
i[34]86-*-go32)		gdb_host=go32
			gdb_serial_driver=ser-go32.c
			;;
i[34]86-*-linux)	gdb_host=linux ;;
i[34]86-*-mach)		gdb_host=i386mach ;;
i[34]86-*-sco3.2v4*)	gdb_host=i386sco4 ;;
i[34]86-*-sco*)		gdb_host=i386sco ;;
i[34]86-*-solaris*)	gdb_host=i386sol2 ;;
i[34]86-*-sunos*)	gdb_host=sun386 ;;
i[34]86-*-sysv3.2)	gdb_host=i386v32 ;;
i[34]86-*-sysv4*)	gdb_host=i386v4 ;;
i[34]86-*-sysv*)	gdb_host=i386v ;;

m680[01]0-sun-sunos3*)	gdb_host=sun2os3 ;;
m680[01]0-sun-sunos4*)	gdb_host=sun2os4 ;;
m68030-sony-*)		gdb_host=news1000 ;;

m68*-altos-*)		gdb_host=altos ;;
m68*-apollo*-sysv*)	gdb_host=apollo68v ;;
m68*-apollo*-bsd*)	gdb_host=apollo68b ;;
m68*-att-*)		gdb_host=3b1 ;;
m68*-cbm-sysv4*)	gdb_host=amix ;;
m68*-hp-bsd*)		gdb_host=hp300bsd ;;
m68*-hp-hpux*)		gdb_host=hp300hpux ;;
m68*-isi-*)		gdb_host=isi ;;
m68*-*-lynxos*)		gdb_host=m68klynx ;;
m68*-sony-*)		gdb_host=news ;;
m68*-sun-sunos3*)	gdb_host=sun3os3 ;;
m68*-sun-sunos4*)	gdb_host=sun3os4 ;;
m68*-sun-*)		gdb_host=sun3os4 ;;

m88k-motorola-*)	gdb_host=delta88 ;;
m88k-*-*)		gdb_host=m88k ;;

mips-dec-*)		gdb_host=decstation ;;
mips-little-*)		gdb_host=littlemips ;;
mips-sgi-irix3)		gdb_host=irix3 ;;
mips-sgi-irix4*)	gdb_host=irix4 ;;
mips-sony-*)		gdb_host=bigmips ;;

none-*-*)		gdb_host=none ;;

np1-*-*)		gdb_host=np1 ;;

ns32k-umax-*)		gdb_host=umax ;;
ns32k-utek-sysv)	gdb_host=merlin ;;

pn-*-*)			gdb_host=pn ;;

pyramid-*-*)		gdb_host=pyramid ;;

romp-*-*)		gdb_host=rtbsd ;;

rs6000-*-*)		gdb_host=rs6000 ;;

sparc-*-lynxos*)	gdb_host=sparclynx ;;
sparc-*-solaris2*)	gdb_host=sun4sol2 ;;
sparc-*-sunos4*)	gdb_host=sun4os4 ;;
sparc-*-*)		gdb_host=sun4os4 ;;

tahoe-*-*)		gdb_host=tahoe ;;

vax-*-bsd*)		gdb_host=vaxbsd ;;
vax-*-ultrix2*)		gdb_host=vaxult2 ;;
vax-*-ultrix*)		gdb_host=vaxult ;;

esac

if [ ! -f ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ]; then
	echo '***' "GDB remote does not support host ${host}" 1>&2
	exit 1
fi

#  We really shouldn't depend on there being a space after XM_FILE= ...
hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`

# per-target:

# Map target cpu into the config cpu subdirectory name.
# The default is $target_cpu.

case "${target_cpu}" in

alpha)			gdb_target_cpu=alpha ;;
c[12])			gdb_target_cpu=convex ;;
hppa*)			gdb_target_cpu=pa ;;
i[34]86)		gdb_target_cpu=i386 ;;
m68*)			gdb_target_cpu=m68k ;;
np1)			gdb_target_cpu=gould ;;
pn)			gdb_target_cpu=gould ;;
pyramid)		gdb_target_cpu=pyr ;;
sparc*)			gdb_target_cpu=sparc ;;
*)			gdb_target_cpu=$target_cpu ;;

esac

# map target info into gdb names.

case "${target}" in

a29k-*-aout)		gdb_target=a29k ;;
a29k-*-coff)		gdb_target=a29k ;;
a29k-*-elf)		gdb_target=a29k ;;
a29k-*-ebmon)		gdb_target=a29k ;;
a29k-*-kern)		gdb_target=a29k-kern ;;
a29k-*-none)		gdb_target=a29k ;;
a29k-*-sym1)		gdb_target=ultra3 ;;
a29k-*-udi)		gdb_target=a29k-udi ;;
alpha-*-netware*)	gdb_target=alpha-nw ;;

arm-*-*)		gdb_target=arm ;;

c1-*-*)			gdb_target=convex ;;
c2-*-*)			gdb_target=convex ;;

h8300-*-*)		gdb_target=h8300hms ;;
h8500-*-*)		gdb_target=h8500hms ;;

sh-*-*)			gdb_target=sh ;;

hppa*-*-bsd*)		gdb_target=hppabsd ;;
hppa*-*-hpux*)		gdb_target=hppahpux ;;

i[34]86-sequent-*)	gdb_target=symmetry ;;
i[34]86-ncr-*)		gdb_target=ncr3000 ;;

i[34]86-*-aout)		gdb_target=i386aout ;;
i[34]86-*-coff)		gdb_target=i386v ;;
i[34]86-*-elf)		gdb_target=i386v ;;

i[34]86-*-bsd*)		gdb_target=i386bsd ;;
i[34]86-*-lynxos*)	gdb_target=i386lynx ;;
i[34]86-*-go32)		gdb_target=i386aout ;;
i[34]86-*-solaris*)	gdb_target=i386sol2 ;;
i[34]86-*-sunos*)	gdb_target=sun386 ;;
i[34]86-*-sysv4*)	gdb_target=i386v4 ;;
i[34]86-*-sco*)		gdb_target=i386v ;;
i[34]86-*-sysv*)	gdb_target=i386v ;;
i[34]86-*-linux)	gdb_target=linux ;;

i960-*-bout)		gdb_target=vxworks960 ;;
i960-*-coff)		gdb_target=nindy960 ;;
i960-*-elf)		gdb_target=nindy960 ;;

i960-*-nindy)		gdb_target=nindy960 ;;
i960-*-vxworks)		gdb_target=vxworks960 ;;

m68000-*-aout)		gdb_target=m68k-nofp ;;
m68000-*-coff)		gdb_target=m68k-nofp ;;
m68000-*-elf)		gdb_target=m68k-nofp ;;
m68000-*-sunos3*)	gdb_target=sun2os3 ;;
m68000-*-sunos4*)	gdb_target=sun2os4 ;;

m68*-cbm-sysv4*)	gdb_target=amix ;;
m68*-hp-bsd*)		gdb_target=hp300bsd ;;
m68*-hp-hpux*)		gdb_target=hp300hpux ;;

m68*-altos-*)		gdb_target=altos ;;
m68*-att-*)		gdb_target=3b1 ;;
m68*-ericsson-*)	gdb_target=es1800 ;;
m68*-isi-*)		gdb_target=isi ;;
m68*-netx-*)		gdb_target=vxworks68 ;;
m68*-sony-*)		gdb_target=news ;;
m68*-tandem-*)		gdb_target=st2000 ;;

m68*-*-aout)		gdb_target=m68k-fp ;;
m68*-*-coff)		gdb_target=m68k-fp ;;
m68*-*-elf)		gdb_target=m68k-fp ;;
m68*-*-lynxos*)		gdb_target=m68klynx ;;
m68*-*-os68k)		gdb_target=os68k ;;
m68*-*-sunos3*)		gdb_target=sun3os3 ;;
m68*-*-sunos4*)		gdb_target=sun3os4 ;;
m68*-*-vxworks*)	gdb_target=vxworks68 ;;

m88k-motorola-*)	gdb_target=delta88 ;;
m88k-*-*)		gdb_target=m88k ;;

mips-big-*)		gdb_target=bigmips ;;
mips-dec-*)		gdb_target=decstation ;;
mips-idt-ecoff)		gdb_target=idt ;;
mips-little-*)		gdb_target=littlemips ;;
mips-sgi-*)		gdb_target=irix3 ;;
mips-sony-*)		gdb_target=bigmips ;;

none-*-*)		gdb_target=none ;;

np1-*-*)		gdb_target=np1 ;;

ns32k-utek-sysv)	gdb_target=merlin ;;
ns32k-utek-*)		gdb_target=umax ;;

pn-*-*)			gdb_target=pn ;;

pyramid-*-*)		gdb_target=pyramid ;;

rs6000-*-*)		gdb_target=rs6000 ;;

sparc-*-aout)		gdb_target=sparc-em ;;
sparc-*-coff)		gdb_target=sparc-em ;;
sparc-*-elf)		gdb_target=sparc-em ;;
sparc-*-lynxos*)	gdb_target=sparclynx ;;
sparc-*-solaris2*)	gdb_target=sun4sol2 ;;
sparc-*-sunos4*)	gdb_target=sun4os4 ;;
sparc-*-vxworks*)	gdb_target=sparc-em ;;
sparc-*-*)		gdb_target=sun4os4 ;;
sparclite*-*-*)		gdb_target=sparclite ;;

tahoe-*-*)		gdb_target=tahoe ;;
vax-*-*)		gdb_target=vax ;;

z8k-*-sim)		gdb_target=z8ksim ;;
esac

if [ ! -f ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt ]; then
	echo '***' "GDB remote does not support target ${target}" 1>&2
	exit 1
fi

if [ -z "${removing}" ] ; then
	cat ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
		print substr($0,6)}'
fi

#  We really shouldn't depend on there being a space after TM_FILE= ...
targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt`

if [ "${target}" = "${host}" ] ; then
	nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`
fi

host_makefile_frag=../config/${gdb_host_cpu}/${gdb_host}.mh
target_makefile_frag=../config/${gdb_target_cpu}/${gdb_target}.mt

# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
# (NAT_FILE) is not set in the ?config/* file, we don't make the
# corresponding links.  But we have to remove the xm.h files and tm.h
# files anyway, e.g. when switching from "configure host" to
# "configure none".

files=
links=
rm -f xm.h
if [ "${hostfile}" != "" ]; then
	if [ -f ${srcdir}/../config/${hostfile} ]; then
		files="${files} ../config/${hostfile}"
	else
		files="${files} ../config/${gdb_host_cpu}/${hostfile}"
	fi
	links="${links} xm.h"
fi
rm -f tm.h
if [ "${targetfile}" != "" ]; then
	if [ -f ${srcdir}/../config/${targetfile} ]; then
		files="${files} ../config/${targetfile}"
	else
		files="${files} ../config/${gdb_target_cpu}/${targetfile}"
	fi
	links="${links} tm.h"
fi
rm -f nm.h
if [ "${nativefile}" != "" ]; then
	if [ -f ${srcdir}/../config/${nativefile} ]; then
		files="${files} ../config/${nativefile}"
	else
		files="${files} ../config/${gdb_host_cpu}/${nativefile}"
	fi
	links="${links} nm.h"
# temporary scaffolding until all hosts have the host/target/native
# split in place.
else
	files="${files} ../config/nm-trash.h"
	links="${links} nm.h"
fi

if [ ${target_cpu} = "sparclite" ]; then
	configdirs="${configdirs} sparclite"
fi

# post-target:

if [ "${nativefile}" = "" ] ; then
	sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
		< Makefile > Makefile.tem
	mv -f Makefile.tem Makefile
fi
Commit	Line	Data
27847c6f SG	1	srcname="Remote GDB server for Netware"
	2	srctrigger=gdbserve.c
	3
	4	# per-host:
	5
	6	# Map host cpu into the config cpu subdirectory name.
	7	# The default is $host_cpu.
	8
	9	case "${host_cpu}" in
	10
	11	alpha) gdb_host_cpu=alpha ;;
	12	c[12]) gdb_host_cpu=convex ;;
	13	hppa*) gdb_host_cpu=pa ;;
	14	i[34]86) gdb_host_cpu=i386 ;;
	15	m68*) gdb_host_cpu=m68k ;;
	16	np1) gdb_host_cpu=gould ;;
	17	pyramid) gdb_host_cpu=pyr ;;
	18	*) gdb_host_cpu=$target_cpu ;;
	19
	20	esac
	21
	22	# map host info into gdb names.
	23
	24	case "${host}" in
	25
	26	a29k--) gdb_host=ultra3 ;;
	27	alpha--osf) gdb_host=alpha-osf1 ;;
	28
	29	arm--) gdb_host=arm ;;
	30
	31	c[12]--) gdb_host=convex ;;
	32
	33	hppa-hp-bsd) gdb_host=hppabsd ;;
	34	hppa-hp-hpux) gdb_host=hppahpux ;;
	35
	36	i[34]86-ncr-*) gdb_host=ncr3000 ;;
	37	i[34]86-sequent-*) gdb_host=symmetry ;;
	38
	39	i[34]86--bsd) gdb_host=i386bsd ;;
	40	i[34]86--lynxos) gdb_host=i386lynx ;;
	41	i[34]86-*-go32) gdb_host=go32
	42	gdb_serial_driver=ser-go32.c
	43	;;
	44	i[34]86-*-linux) gdb_host=linux ;;
	45	i[34]86-*-mach) gdb_host=i386mach ;;
	46	i[34]86--sco3.2v4) gdb_host=i386sco4 ;;
	47	i[34]86--sco) gdb_host=i386sco ;;
	48	i[34]86--solaris) gdb_host=i386sol2 ;;
	49	i[34]86--sunos) gdb_host=sun386 ;;
	50	i[34]86-*-sysv3.2) gdb_host=i386v32 ;;
	51	i[34]86--sysv4) gdb_host=i386v4 ;;
	52	i[34]86--sysv) gdb_host=i386v ;;
	53
	54	m680[01]0-sun-sunos3*) gdb_host=sun2os3 ;;
	55	m680[01]0-sun-sunos4*) gdb_host=sun2os4 ;;
	56	m68030-sony-*) gdb_host=news1000 ;;
	57
	58	m68-altos-) gdb_host=altos ;;
	59	m68-apollo-sysv*) gdb_host=apollo68v ;;
	60	m68-apollo-bsd*) gdb_host=apollo68b ;;
	61	m68-att-) gdb_host=3b1 ;;
	62	m68-cbm-sysv4) gdb_host=amix ;;
	63	m68-hp-bsd) gdb_host=hp300bsd ;;
	64	m68-hp-hpux) gdb_host=hp300hpux ;;
65	m68-isi-) gdb_host=isi ;;
66	m68--lynxos*) gdb_host=m68klynx ;;
67	m68-sony-) gdb_host=news ;;
68	m68-sun-sunos3) gdb_host=sun3os3 ;;
69	m68-sun-sunos4) gdb_host=sun3os4 ;;
70	m68-sun-) gdb_host=sun3os4 ;;
71
72	m88k-motorola-*) gdb_host=delta88 ;;
73	m88k--) gdb_host=m88k ;;
74
75	mips-dec-*) gdb_host=decstation ;;
76	mips-little-*) gdb_host=littlemips ;;
77	mips-sgi-irix3) gdb_host=irix3 ;;
78	mips-sgi-irix4*) gdb_host=irix4 ;;
79	mips-sony-*) gdb_host=bigmips ;;
80
81	none--) gdb_host=none ;;
82
83	np1--) gdb_host=np1 ;;
84
85	ns32k-umax-*) gdb_host=umax ;;
86	ns32k-utek-sysv) gdb_host=merlin ;;
87
88	pn--) gdb_host=pn ;;
89
90	pyramid--) gdb_host=pyramid ;;
91
92	romp--) gdb_host=rtbsd ;;
93
94	rs6000--) gdb_host=rs6000 ;;
95
96	sparc--lynxos) gdb_host=sparclynx ;;
97	sparc--solaris2) gdb_host=sun4sol2 ;;
98	sparc--sunos4) gdb_host=sun4os4 ;;
99	sparc--) gdb_host=sun4os4 ;;
100
101	tahoe--) gdb_host=tahoe ;;
102
103	vax--bsd) gdb_host=vaxbsd ;;
104	vax--ultrix2) gdb_host=vaxult2 ;;
105	vax--ultrix) gdb_host=vaxult ;;
106
107	esac
108
109	if [ ! -f ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ]; then
110	echo '***' "GDB remote does not support host ${host}" 1>&2
111	exit 1
112	fi
113
114	# We really shouldn't depend on there being a space after XM_FILE= ...
115	hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`
116
117	# per-target:
118
119	# Map target cpu into the config cpu subdirectory name.
120	# The default is $target_cpu.
121
122	case "${target_cpu}" in
123
124	alpha) gdb_target_cpu=alpha ;;
125	c[12]) gdb_target_cpu=convex ;;
126	hppa*) gdb_target_cpu=pa ;;
127	i[34]86) gdb_target_cpu=i386 ;;
128	m68*) gdb_target_cpu=m68k ;;
129	np1) gdb_target_cpu=gould ;;
130	pn) gdb_target_cpu=gould ;;
131	pyramid) gdb_target_cpu=pyr ;;
132	sparc*) gdb_target_cpu=sparc ;;
133	*) gdb_target_cpu=$target_cpu ;;
134
135	esac
136
137	# map target info into gdb names.
138
139	case "${target}" in
140
141	a29k-*-aout) gdb_target=a29k ;;
142	a29k-*-coff) gdb_target=a29k ;;
143	a29k-*-elf) gdb_target=a29k ;;
144	a29k-*-ebmon) gdb_target=a29k ;;
145	a29k-*-kern) gdb_target=a29k-kern ;;
146	a29k-*-none) gdb_target=a29k ;;
147	a29k-*-sym1) gdb_target=ultra3 ;;
148	a29k-*-udi) gdb_target=a29k-udi ;;
149	alpha--netware) gdb_target=alpha-nw ;;
150
151	arm--) gdb_target=arm ;;
152
153	c1--) gdb_target=convex ;;
154	c2--) gdb_target=convex ;;
155
156	h8300--) gdb_target=h8300hms ;;
157	h8500--) gdb_target=h8500hms ;;
158
159	sh--) gdb_target=sh ;;
160
161	hppa--bsd*) gdb_target=hppabsd ;;
162	hppa--hpux*) gdb_target=hppahpux ;;
163
164	i[34]86-sequent-*) gdb_target=symmetry ;;
165	i[34]86-ncr-*) gdb_target=ncr3000 ;;
166
167	i[34]86-*-aout) gdb_target=i386aout ;;
168	i[34]86-*-coff) gdb_target=i386v ;;
169	i[34]86-*-elf) gdb_target=i386v ;;
170
171	i[34]86--bsd) gdb_target=i386bsd ;;
172	i[34]86--lynxos) gdb_target=i386lynx ;;
173	i[34]86-*-go32) gdb_target=i386aout ;;
174	i[34]86--solaris) gdb_target=i386sol2 ;;
175	i[34]86--sunos) gdb_target=sun386 ;;
176	i[34]86--sysv4) gdb_target=i386v4 ;;
177	i[34]86--sco) gdb_target=i386v ;;
178	i[34]86--sysv) gdb_target=i386v ;;
179	i[34]86-*-linux) gdb_target=linux ;;
180
181	i960-*-bout) gdb_target=vxworks960 ;;
182	i960-*-coff) gdb_target=nindy960 ;;
183	i960-*-elf) gdb_target=nindy960 ;;
184
185	i960-*-nindy) gdb_target=nindy960 ;;
186	i960-*-vxworks) gdb_target=vxworks960 ;;
187
188	m68000-*-aout) gdb_target=m68k-nofp ;;
189	m68000-*-coff) gdb_target=m68k-nofp ;;
190	m68000-*-elf) gdb_target=m68k-nofp ;;
191	m68000--sunos3) gdb_target=sun2os3 ;;
192	m68000--sunos4) gdb_target=sun2os4 ;;
193
194	m68-cbm-sysv4) gdb_target=amix ;;
195	m68-hp-bsd) gdb_target=hp300bsd ;;
196	m68-hp-hpux) gdb_target=hp300hpux ;;
197
198	m68-altos-) gdb_target=altos ;;
199	m68-att-) gdb_target=3b1 ;;
200	m68-ericsson-) gdb_target=es1800 ;;
201	m68-isi-) gdb_target=isi ;;
202	m68-netx-) gdb_target=vxworks68 ;;
203	m68-sony-) gdb_target=news ;;
204	m68-tandem-) gdb_target=st2000 ;;
205
206	m68--aout) gdb_target=m68k-fp ;;
207	m68--coff) gdb_target=m68k-fp ;;
208	m68--elf) gdb_target=m68k-fp ;;
209	m68--lynxos*) gdb_target=m68klynx ;;
210	m68--os68k) gdb_target=os68k ;;
211	m68--sunos3*) gdb_target=sun3os3 ;;
212	m68--sunos4*) gdb_target=sun3os4 ;;
213	m68--vxworks*) gdb_target=vxworks68 ;;
214
215	m88k-motorola-*) gdb_target=delta88 ;;
216	m88k--) gdb_target=m88k ;;
217
218	mips-big-*) gdb_target=bigmips ;;
219	mips-dec-*) gdb_target=decstation ;;
220	mips-idt-ecoff) gdb_target=idt ;;
221	mips-little-*) gdb_target=littlemips ;;
222	mips-sgi-*) gdb_target=irix3 ;;
223	mips-sony-*) gdb_target=bigmips ;;
224
225	none--) gdb_target=none ;;
226
227	np1--) gdb_target=np1 ;;
228
229	ns32k-utek-sysv) gdb_target=merlin ;;
230	ns32k-utek-*) gdb_target=umax ;;
231
232	pn--) gdb_target=pn ;;
233
234	pyramid--) gdb_target=pyramid ;;
235
236	rs6000--) gdb_target=rs6000 ;;
237
238	sparc-*-aout) gdb_target=sparc-em ;;
239	sparc-*-coff) gdb_target=sparc-em ;;
240	sparc-*-elf) gdb_target=sparc-em ;;
241	sparc--lynxos) gdb_target=sparclynx ;;
242	sparc--solaris2) gdb_target=sun4sol2 ;;
243	sparc--sunos4) gdb_target=sun4os4 ;;
244	sparc--vxworks) gdb_target=sparc-em ;;
245	sparc--) gdb_target=sun4os4 ;;
246	sparclite--*) gdb_target=sparclite ;;
247
248	tahoe--) gdb_target=tahoe ;;
249	vax--) gdb_target=vax ;;
250
251	z8k-*-sim) gdb_target=z8ksim ;;
252	esac
253
254	if [ ! -f ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt ]; then
255	echo '***' "GDB remote does not support target ${target}" 1>&2
256	exit 1
257	fi
258
259	if [ -z "${removing}" ] ; then
260	cat ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt \| awk '$1 == "#msg" {
261	print substr($0,6)}'
262	fi
263
264	# We really shouldn't depend on there being a space after TM_FILE= ...
265	targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt`
266
267	if [ "${target}" = "${host}" ] ; then
268	nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`
269	fi
270
271	host_makefile_frag=../config/${gdb_host_cpu}/${gdb_host}.mh
272	target_makefile_frag=../config/${gdb_target_cpu}/${gdb_target}.mt
273
274	# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
275	# (NAT_FILE) is not set in the ?config/* file, we don't make the
276	# corresponding links. But we have to remove the xm.h files and tm.h
277	# files anyway, e.g. when switching from "configure host" to
278	# "configure none".
279
280	files=
281	links=
282	rm -f xm.h
283	if [ "${hostfile}" != "" ]; then
284	if [ -f ${srcdir}/../config/${hostfile} ]; then
285	files="${files} ../config/${hostfile}"
286	else
287	files="${files} ../config/${gdb_host_cpu}/${hostfile}"
288	fi
289	links="${links} xm.h"
290	fi
291	rm -f tm.h
292	if [ "${targetfile}" != "" ]; then
293	if [ -f ${srcdir}/../config/${targetfile} ]; then
294	files="${files} ../config/${targetfile}"
295	else
296	files="${files} ../config/${gdb_target_cpu}/${targetfile}"
297	fi
298	links="${links} tm.h"
299	fi
300	rm -f nm.h
301	if [ "${nativefile}" != "" ]; then
302	if [ -f ${srcdir}/../config/${nativefile} ]; then
303	files="${files} ../config/${nativefile}"
304	else
305	files="${files} ../config/${gdb_host_cpu}/${nativefile}"
306	fi
307	links="${links} nm.h"
308	# temporary scaffolding until all hosts have the host/target/native
309	# split in place.
310	else
311	files="${files} ../config/nm-trash.h"
312	links="${links} nm.h"
313	fi
314
315	if [ ${target_cpu} = "sparclite" ]; then
316	configdirs="${configdirs} sparclite"
317	fi
318
319	# post-target:
320
321	if [ "${nativefile}" = "" ] ; then
322	sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
323	< Makefile > Makefile.tem
324	mv -f Makefile.tem Makefile
325	fi