* config/mips/xm-makeva.h: Removed, no longer necessary.

[binutils.git] / gdb / testsuite / ChangeLog

Mon Jun 20 23:54:37 1994  Peter Schauer  ([email protected])

	* gdb.base/list.exp:  Tweak alternate pattern for listing of an
	included file to run under newer versions of expect.
	* gdb.c++/demangle.exp:  Add spaces to the expect patterns between
	consecutive >'s in templates to accomodate recent cplus-dem.c change.
	Remove xfail for the virtual table of BDDHookV.

Sat Jun 18 12:51:34 1994  Stan Shebs  ([email protected])

	* lib/gdb.exp (string_to_regexp): Set a default result.
	(default_gdb_start): Fix misleading message.

Wed Jun 15 12:10:10 1994  Stan Shebs  ([email protected])

	* config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout:
	Remove all CC, etc definitions.
	* config/mt-hpux: New file.
	* config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove:
	(CFLAGS, LDFLAGS): Define.
	* config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS.

	* Makefile.in (site.exp): Don't insert host_os, etc.
	(just-check): Just use RUNTEST with RUNTESTFLAGS only.
	(distclean): Check existence of subdir.
	* gdb.base/configure.in (hppa*-*-hpux*): Recognize.
	* gdb.base/Makefile.in: General cleanup and simplification.
	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
	to build executables.	Use default rule to build .o files.
	(EXPECT, RUNTEST, CC): Fix relative pathname.
	(site.exp): Don't insert host_os, etc.
	* gdb.base/signals.c (main): Don't call signal unless SIGALRM
	and/or SIGUSR1 defined.
	* gdb.base/watchpoint.c: Don't include stdio.h a second time.
	* gdb.c++/Makefile.in: General cleanup and simplification.
	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
	(CFLAGS): Remove.
	(EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname.

Fri Jun 10 10:55:09 1994  Jeff Law  ([email protected])

	* gdb.base/recurse.exp: Misc changes to get tests running again
	after Kung's changes to the watchpoint code.
	* gdb.base/watchpoint.exp: Likewise.

Thu Jun  9 15:16:55 1994  Per Bothner  ([email protected])

	* lib/gdb.exp (string_to_regexp):  Convert {\} also.

Wed Jun  8 12:12:17 1994  Stan Shebs  ([email protected])

	* config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start.
	* lib/gdb.exp (default_gdb_start): Define.
	* gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp,
	gdb.base/funcargs.exp, gdb.base/opaque.exp,
	gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp,
	gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp,
	gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp:
	Don't call gdb_target_udi in between tests.

Tue Jun  7 08:30:15 1994  Jim Kingdon  ([email protected])

	* gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle
	(which was basically just a local version of the same thing).  In
	addition to avoiding duplication, gdb_test_exact is faster.
	* lib/gdb.exp (gdb_test_exact): Fix typo.

	* lib/gdb.exp (delete_breakpoints): If there were no breakpoints,
	don't give an error.

	* gdb.base/term.exp: Call delete_breakpoints before starting.

	* gdb.base/Makefile.in (EXECUTABLES): Remove t10.
	(t10): Add comment.

Mon Jun  6 18:26:50 1994  Stan Shebs  ([email protected])

	Reorganization of the GDB Test Suite.

	* gdb.base: New directory, contains all the basic tests.
	* gdb.c++: New directory, tests specific to C++.
	* gdb.chill: New directory, tests specific to Chill.
	* gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06,
	gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13,
	gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23,
	gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved
	into appropriate new directories (t00-t17 to base, t20-t23 to c++,
	t30-31 to chill).
	* */gdbme.*: Rename to match appropriate expect scripts.
	* gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c,
	gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c,
	gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h,
	gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c,
	gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c,
	gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c,
	gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c,
	gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c,
	gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c,
	gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files.
	* gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc,
	gdb.c++/virtfunc.cc: New names of C++ files.
	* gdb.chill/chillvars.ch: New name of Chill file.
	* gdb.base/configure.in, gdb.c++/configure.in,
	gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in.
	* gdb.base/Makefile.in, gdb.c++/Makefile.in,
	gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in.
	* configure.in (configdirs): Update to reflect directory changes.
	(target_abbrev): No longer define for any configuration.
	* Makefile.in: Cosmetic improvements to header comments.

Fri Jun  3 18:56:06 1994  Per Bothner  ([email protected])

	Various changes to gdb.t31:

	* Makefile.in (gdbme.o):  Compile with -fspecial_UC.
	* gdbme.ch:  Make all key-words and predefineds be upper-case.
	* chillvars.exp:  Expect key-words and predefinds in upper-case.

	* chillvars.exp:  Use gdb_test_exact many places.
	Change expected output for arrays (which now includes index labels).

	* pr-5020.exp, gdme.ch (module PR_5020):
	New test, for PR-5020.

Thu Jun  2 16:02:41 1994  Per Bothner  ([email protected])

	* lib/gdb.exp (string_to_regexp, gdb_test_exact):  New procedures.
	* Makefile.in (CHILL_LIB):  Remove bogus redundant definitions.

Sun May 29 22:31:42 1994  Per Bothner  ([email protected])

	* Makefile.in:  Fix bit-rot in definitions of CHILL,
	CHILL_FOR_TARGET and Chill_LIB.
	* gdb.t31/gdbme.ch:  Fix syntax of nested array tuples.
	* gdb.t31/Makefile.in:  Add definitions for CHILLFLAGS,
	CHILL, and CHILL_LIB.

Wed May 25 17:10:38 1994  Per Bothner  ([email protected])

	* Makefile.in (TARGET_FLAGS_TO_PASS): Fix syntax of
	sanitize-chill comments.

Sat May 21 10:05:08 1994  Bill Cox  ([email protected])

	* Revert the previous changes.  Please see Rob's directory
	  /lisa/test/rob/progressive/gdb/testsuite for these fixes.

Thu May 19 12:51:00 1994  Bill Cox  ([email protected])

	* Makefile.in, configure.in, config/mips-gdb.exp,
          config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
          config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
          config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
	  gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
	  gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
	  gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
	  gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
	  gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
	  gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
	  gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
	  gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
	  gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
	  gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
	  gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
	  gdb.t24/demangle.exp, lib/gdb.exp:  Check in Rob's testing
	  changes from 94Q1.

Wed May 18 17:04:03 1994  Bill Cox  ([email protected]),

	* config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
	  config/mt-slite, config/mt-unix, config/mt-vxworks: Add
	  Rob's new testing fragments.

Tue May 17 15:04:14 1994  Bill Cox  ([email protected])

	* config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp,
          lib/gdb.exp: Replace error proc calls with perror.

Mon May 16 19:00:50 1994  Stan Shebs  ([email protected])

	* gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the
	version also, match on casted version strings, and match on
	gdb startup case where the line numbers might be messed up.

Fri May 13 18:00:27 1994  Bill Cox  ([email protected])

	* config/mt-i960-vx (LDFLAGS): Add '-r' option for test links.
          (CFLAGS): Delete it from here.

Thu May 12 14:06:34 1994  Bill Cox  ([email protected])

	* .Sanitize: Drop the gdb.t30 and gdb.t31 directories
	  unless keep-chill was specified on the command line.
	* Makefile.in, config/makefile.rel.in: : Add comment lines
          to Sanitize out CHILL references unless keep-chill
           was specified.

Tue May  3 16:08:09 1994  Kung Hsu  ([email protected])

	* gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs.

Fri Apr 29 14:26:35 1994  Stan Shebs  ([email protected])

	* Makefile.in (RUNTEST): Default to just "runtest".

Tue Apr 26 22:21:40 1994  Jeffrey A. Law  ([email protected])

	* gdb.t17/callfuncs.exp: More comments about t_func_values tests.
	* gdb.t17/gdbme.c (t_func_values): Add comments about how and why
	the code has been restructured.

Thu Apr 21 12:48:07 1994  Jim Kingdon  ([email protected])

	* gdb.t00/default.exp (set write): Allow any number of \r and/or
	\n, not just one of each.

	* gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4
	/bin/cc gives a warning if you do.

Thu Apr 21 11:54:04 1994  Kung Hsu  ([email protected])

	* gdb.t24/demangle.exp: change expect pattern of 
	__t10ListS_link1ZUiRCUiPT0

Wed Apr 13 15:05:00 1994  Jeffrey A. Law  ([email protected])

	* gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints
	on local variables in recursive functions.

	* gdb.t07/Makefile.in: Build the new test.

Tue Apr 12 20:45:25 1994  Jeffrey A. Law  ([email protected])

	* gdb.t17/gdbme.c (t_func_values): Do not compare function pointers
	directly.  Instead compare the return values from actual calls.

Mon Apr 11 10:31:00 1994  Bill Cox  ([email protected])

	* Makefile.in (check): Set TCL_LIBRARY for runtest.

Mon Apr 11 09:15:30 1994  Jeffrey A. Law  ([email protected])

	* From Peter Schauer with minor modifications.
        * gdb.t15/return.exp (return_tests): Handle targets where "return"
        stops in mid-line in the caller.  Add xfail for returning a float
        value on X86 targets.

Tue Apr  5 15:16:33 1994  Jeffrey A. Law  ([email protected])

	* gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves
	to avoid expect lossage.
	(fmem_LRbug_tests): Likewise.
	* gdb.disasm/hppa.s: Corresponding changes.

	* gdb.disasm/hppa.exp: Rework escape sequences and end-of-line
	conditions to work with latest dejagnu/expect.

	* gdb.t15/funcargs.exp (finish from indirect call): No longer
	expected to fail on the PA.
	(backtrace in call with trampolines): Explicitly require main
	to be frame #1 (no trampolines should show up in backtrace).

	* gdb.t00/default.exp: Use "exp_continue" rather than obsolete
	"continue -expect".
	* gdb.t06/break.exp: Likewise.
	* gdb.t07/watchpoint.exp: Likewise.
	* gdb.t13/bitfields.exp: Likewise.
	* gdb.t15/{funcargs,return}.exp: Likewise.
	* gdb.stabs/weird.exp: Likewise.
	* config/{mips,udi}-gdb.exp: Likewise.

	* hppa.sed: Enclose comments within a sed command to avoid
	losing with the old OSF1 sed.

Wed Mar 30 00:31:49 1994  Peter Schauer  ([email protected])

	* gdb.t02/whatis.exp, gdb.t08/opaque.exp:  Add XFAILs for
	sequent dynix.
	* gdb.t06/signals.exp:  Add clear_xfail for sequent dynix.
	* gdb.t15/funcargs.exp:  Conditionally step again to really
	finish from marker_call_with_trampolines. Handle the case where
	the first step from within call_with_trampolines already steps
	us back to main.
	* gdb.t15/gdbme.c:  Add comment to closing brace of
	call_with_trampolines for funcargs.exp.

Tue Mar 29 23:55:27 1994  Jeffrey A. Law  ([email protected])

	* gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): 
	Fix typo(s).

Sun Mar 27 16:53:14 1994  Jeffrey A. Law  ([email protected])

	* gdb.t07/gdbme.c: More code for watchpoint testing.

	* gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
	"Hardware watchpoint" throughout file.
	(test_watchpoint_triggered_in_syscall): New test.
	(test_complex_watchpoint): New test.

Fri Mar 25 17:05:31 1994  Jeffrey A. Law  ([email protected])

	* gdbme.c (call_with_trampolines): New function to try and step
	into.  Tests trampoline problems on the PA.

	* funcargs.exp (localvars_in_indirect_call): No longer expect
	stepping into indirect call to fail on PAs.
	(test_stepping_over_trampolines): New test.

Wed Mar 23 07:43:33 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestions for static member function tests, and
	completion tests.

Wed Mar 16 08:28:28 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestions for "p/a" tests.

	* lib/gdb.exp: Set prompt to (gdb) if it isn't already set.
	(default_gdb_exit): Replace all the hair with sending "quit" to
	the process with a simple close.

Tue Mar 15 08:45:50 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestions for shared library tests.

Sun Mar 13 10:45:22 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestions for x/s tests.

Fri Mar 11 08:22:00 1994  Jim Kingdon  ([email protected])

	* gdb.t00/help.exp: Replace most of docstrings for "tbreak",
	"enable once", and "enable breakpoints once" with ".*".

Thu Mar 10 08:34:27 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestions about structure passing tests.

Mon Mar  7 13:45:54 1994  Peter Schauer  ([email protected])

	* gdb.t03/gdbme.c:  gcc version 1 puts out the wrong stabs for
	the primary1 test, use work around if __GNUC__ < 2.
	* gdb.t06/signals.c:  Add comments for signals.exp pattern matching.
	* gdb.t06/signals.exp:  Add XFAILs for i386 bsd and vax ultrix.
	Test for bad output rather than waiting for timeout.  Issue
	second continue only if first continue failed.

Wed Mar  2 10:08:01 1994  Jim Kingdon  ([email protected])

	* gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do
	operator[] test with gdb_test because the old code didn't seem to
	be getting the quoting right with the new dejagnu.

Thu Feb 24 19:49:25 1994  Rob Savoye  ([email protected])

	* lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
	one from the path.
	* Makefile.in: Use a fresh expect if there is one, use runtest
	from the src tree if there is one.
  
Thu Feb 24 18:49:37 1994  Jim Kingdon  ([email protected])

	* gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
	next over recursive call.  Revise the tests from that point on
	(which had been skipped) to match GDB's actual (correct) output.

	* gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug
	with next over a breakpoint whose condition is false.

	* gdb.t00/help.exp: Comment out "help set print" tests just like
	(and for same reason as) "help set" test.

Mon Feb 14 09:58:23 1994  Jeffrey A. Law  ([email protected])

	* gdb.disasm/hppa.s (fmemLRbug_tests): New tests.
	* gdb.disasm/hppa.exp (fmemLRbug_tests): Run them.

Sun Feb  6 15:36:13 1994  Jim Kingdon  ([email protected])

	* gdb.t06/break.exp (test_next_with_recursion): Remove no longer
	necessary gdb_target_udi.

	* gdb.t03/ptype.exp: For UDI, skip tests which call malloc.

	* gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs
	1838 and 2417; they are fixed.

	* gdb.t02/whatis.exp (v_char_array, v_signed_char_array),
	gdb.t03/ptype.exp (ptype structure, ptype union):
	Remove xfails; the test is looser than when the xfails were added.

	* gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI.
	* gdb.t00/help.exp: Don't expect remote to be in "help target" output.

	* gdb.t01/run.exp: Only run shell test if isnative.

	* config/udi-gdb.exp (gdb_load): Use "file", not "load" command,
	since "run" automatically loads if necessary.  Call gdb_target_udi
	after the "file" since "file" kills any execution target.

	* config/udi-gdb.exp (gdb_start): Don't send "set args main" to
	GDB.  GDB doesn't work that way (not anymore at least) on UDI.
	* gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first
	argument for UDI.

Fri Feb  4 12:19:32 1994  Jim Kingdon  ([email protected])

	* gdb.t17/interrupt.c: If we get EINTR, don't print an error message.

	* gdb.t17/callfuncs.exp: Add xfails for rs6000.

Sat Feb  5 09:11:56 1994  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Re-write demangle to just call gdb_test,
	properly quoting regexps.  This makes the second argument to
	demangle a fixed string, which matches the callers, instead of a
	shell-style pattern which is what the previous implementation
	used.  Update some of the callers.

Sat Feb  5 10:19:09 1994  Jeffrey A. Law  ([email protected])

	* gdb.disasm/hppa.s (comib_tests): Add missing instruction.
	(comib_nullified_tests): Fix typo.
	* gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect
	strings.  No longer expected to fail.

	* gdb.disasm/hppa.s (addib_tests): Fix typo.
	* gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect
	strings.  No longer expected to fail.

	* gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect
	string.  No longer expected to fail.

Fri Feb  4 23:45:11 1994  Jeffrey A. Law  ([email protected])

	* gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string.
	No longer expected to fail.

	* gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect
	string.  No longer expected to fail.

Fri Feb  4 10:35:42 1994  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Remove a bunch more tests which differ
	only in the names (I probably got most of them).  I was even
	generous with some which differed in underscores in names, and
	probably missed a few, and I *still* was able to remove almost a
	third of the file with almost no impact on testsuite coverage.

Thu Feb  3 12:04:49 1994  Jim Kingdon  ([email protected])

	* gdb.t00/default.exp: Match udi_attach error message as well as
	the one from child_attach.

	* gdb.t00/default.exp: Use "." instead of "?" to match a question mark.

	* gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB.

	* gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8.
	* gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it.

	* Move test with enums and partial symbols back to
	gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}.
	Reverts the change of 26 May 93.  Per today's change to
	stabs.texinfo, the behavior that weird.exp was expecting was
	unreasonable; what is important is that the compiler+gdb get
	things right, which happens with a recent gcc.  Also fix the test
	to deal with native compilers which put out the stab gdb can't
	deal with.

Mon Jan 31 15:40:11 1994  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Remove a bunch of tests which differ only
	in the names.  The main thing these accomplish is to slow things down.
	Many more such duplicates surely remain.

	* gdb.t00/help.exp: Comment out "help support" test just like
	(and for same reason as) "help set" test.

Mon Jan 31 06:43:45 1994  Fred Fish  ([email protected])

	* gdb.t06/break.exp:  Remove setup_xfails for
	sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb.
	* gdb.t20/inherit.exp (test_ptype_si):  Update warning message
	about known bug in gcc to include up through 2.5.8.
	* gdb.t20/inherit.exp (test_ptype_vi):  Accept "_vb." as well as
	well as "_vb$".
	* gdb.t21/cplusfuncs.exp (test_lookup_operator_functions):
	Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass
	with latest gcc and gdb.
	* gdb.t22/virtfunc.exp (test_ptype_of_classes):  Accept "_vb." as
	well as "_vb$".

Sat Jan 29 23:31:26 1994  Jeffrey A. Law  ([email protected])

	* configure.in (hppa*-*-*): Also configure and build stabs-only
	tests.

Thu Jan 27 08:21:16 1994  Jeffrey A. Law  ([email protected])

	* gdb.t10/hppa.mt: A makefile fragment for the PA.
	* gdb.t10/configure.in (hppa*-*-*): Use it.

Tue Jan 25 12:58:26 1994  Peter Schauer  ([email protected])

	* gdb.t09/corefile:  Increase timeout when spawning gdb explicitly.

Wed Jan 19 12:40:25 1994  Peter Schauer  ([email protected])

	* gdb.t06/signals.exp:  Handle blocked SIGTRAP on sun3 for bash
	versions prior to 1.13.5.

Tue Jan 18 20:10:50 1994  Jim Kingdon  ([email protected])

	* gdb.t00/default.exp (show prompt): In FAIL case, only match if
	the prompt is at the start of a line.

Mon Jan 17 20:07:51 1994  Jeffrey A. Law  ([email protected])

	* gdb.disasm/hppa.s: Add new tests for sfu and copr instructions.
	Enable "diag" instruction.  Delete copr from fpu_misc_tests, it's
	in the copr tests now.
	* gdb.disasm/hppa.exp: Run new sfu and copr tests.  Do not expect
	copr in the fpu_misc tests anymore.  fpu_misc tests are no longer
	expected to fail.

Fri Jan 14 14:24:21 1994  Rob Savoye  ([email protected])

	* gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp,
	gdb.t31/chillvars.exp, lib/gdb.exp:
	Tweak to run under either version of expect.
	* lib/gdb.exp (default_gdb_exit): Remove "catch" statement.
	* gdb.t00/teststrategy.exp: Use isnative and verbose procedures.
	* gdb.t11/list.exp: Remove extraneous whitespace.

Sat Jan 15 09:57:22 1994  Jim Kingdon  ([email protected])

	* gdb.t16/printcmds.exp (test_print_strings): Accept
	"(unsigned char *) " before the string.

	* TODO: Add notes about printing of fancy types and GDB expressions.

Thu Jan 13 17:16:09 1994  Stan Shebs  ([email protected])

	* Makefile.in: Pass LDFLAGS and LIBS to sub-makes.
	* gdb.t06/configure.in: Don't try to compile signals test program
	if doing mips-idt-ecoff.	

Thu Jan 13 08:25:55 1994  Rob Savoye  ([email protected])

	* Most .exp files: Tweak to run under either version of expect.

Tue Jan 11 15:21:13 1994  Jim Kingdon  ([email protected])

	* gdb.t12/scope.exp: Add xfails for rs6000.  Remove 1806 from existing
	xfails; I'm not sure why they are failing, but not because of PR 1806.

Mon Jan 10 22:14:20 1994  Rob Savoye  ([email protected])

	* config/unix-gdb.exp: Remove gdb_unload cause it's already
	defined in lib/gdb.exp.

Fri Jan  7 12:42:45 1994  Peter Schauer  ([email protected])

	* gdb.t07/watchpoint.exp:  Clear xfail for calling function with
	watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined.
	* gdb.t20/gdbme.cc, gdb.t21/gdbme.cc:  Conversion operator functions
	have to be typeless.

Tue Jan  4 09:32:22 1994  Jim Kingdon  ([email protected])

	* TODO: Add suggestion for copyright year test.

Mon Jan  3 11:35:26 1994  Stan Shebs  ([email protected])

	* configure.in (*-*-lynxos*): Add stabs tests.

Wed Dec  1 21:54:05 1993  Jeffrey A. Law  ([email protected])

	* gdb.stabs/hppa.sed: Only lables should ever start in column zero,
	so insert a tab before any assembler directive in column zero.

	* gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword
	stores.
	* gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword
	stores.
	(fpu_short_memory_tests): Likewise.

Mon Nov 22 13:23:22 1993  Peter Schauer  ([email protected])

	* gdb.stabs/ecoff.mt:  Delete alpha specific if block, fix typo.
	* gdb.stabs/ecoff.sed:  Escape inserted blanks with backslashes, embed
	.stabs directives in comments.

Fri Nov 19 14:09:02 1993  Jim Kingdon  ([email protected])

	* TODO: New file, describing tests we could write.
	* gdb.t09/corefile.exp: Move description of tests to write to TODO.

Tue Nov 16 21:07:44 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Add kludge to force re-sync.

	* gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me"
	to xgdb instead of gdb, get out of gdb.

Tue Nov 16 10:21:57 1993  Rob Savoye  ([email protected])

	* lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work
	for info.

Sat Nov 13 23:17:48 1993  Jeffrey A. Law  ([email protected])

	* gdb.stabs/hppa.mt: A makefile fragment for the PA.
	* gdb.stabs/configure.in (hppa*-*-*): Use it.
	* gdb.stabs/hppa.sed: New sed script for the PA.

Sat Nov 13 22:50:29 1993  Jim Kingdon  ([email protected])

	* gdb.stabs: Re-write weird.def and configuration to use sed
	instead of cpp.  sed is portable and POSIX; cpp is neither.

Fri Nov 12 15:26:36 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed.

Mon Nov  8 16:55:28 1993  Jim Kingdon  ([email protected])

	* gdb.t20/gdbme.cc: Add comment about pmi being optimized out.

Thu Nov  4 23:07:59 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as
	"_vb$".
	* gdb.t00/teststrategy.exp: Add xfail for RS/6000.
	* gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc.

Wed Nov  3 13:53:34 1993  Jim Kingdon  ([email protected])

	* lib/gdb.exp: Comment out code which depends on non-existent
	`transform' procedure.

Wed Nov  3 11:23:11 1993  Rob Savoye  ([email protected])

	* lib/gdb.exp (default_gdb_exit): Remove `catch "close"'.
	* lib/gdb.exp: Transform tool name.
	* gdb.t*/*.exp: Change error to perror so it works with DejaGnu
	1.1's new error handling system.

Mon Nov  1 10:36:29 1993  Jim Kingdon  ([email protected])

	* Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS.

Fri Oct 29 17:58:14 1993  Jim Kingdon  ([email protected])

	* gdb.t00/default.exp: Avoid tests with a lot of .* in them.
	They made pattern matching so slow that timeouts happened on
	heavily loaded systems.  Now any output from "show print" which
	gets us back to the GDB prompt is a PASS.

Mon Oct 25 14:36:50 1993  Stu Grossman  (grossman at cygnus.com)

	* gdb.disasm/hppa.mt:  Use $(srcdir) in hppa.o make rule.

Mon Oct 25 13:35:29 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Skip whole file with xfail for HPPA.

	* gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail.
	It is not from PR 3220.

Sun Oct 24 18:49:58 1993  Jim Kingdon  ([email protected])

	* gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which
	just started failing because they depended on the order the
	subcommands are presented, or exact docstring text.  This kind of
	test is a pain and has minimal benefit.

Thu Oct 21 08:26:48 1993  Jim Kingdon  ([email protected])

	* gdb.t09/corefile.exp: At end of test, use "core" command with
	no arguments.

Wed Oct 20 08:56:02 1993  Stu Grossman  (grossman at cygnus.com)

	* gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16
	17}/Makefile.in:  Make it possible to run the testsuite with Sun
	make and CC = cross gcc by adding explicit build rules for .o
	files.

Tue Oct 19 14:57:38 1993  Jim Kingdon  ([email protected])

	* gdb.t15/funcargs.exp: Don't put comments on same line as
	setup_xfail (@#$*%& tcl braindamage!).
  
Mon Oct 18 21:50:08 1993  Jim Kingdon  ([email protected])

	* gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile.

Fri Oct 15 15:39:54 1993  Kung Hsu  ([email protected])

	* gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'.
	* gdb.t20/inherit.exp: remove three dumplicate entries.

Fri Oct 15 13:45:25 1993  Peter Schauer  ([email protected])

	* gdb.t06/break.exp: For "next over recursive call", fail on any
	incorrect output, not just on "factorial (value=2)".

Fri Oct 15 11:52:56 1993  Peter Schauer  ([email protected])

	* gdb.t12/scope.exp:  Remove xfails, filename::var syntax should be
	working now. Add an xfail if accesing a bss variable causes
	a memory error if the target is not yet run.

Thu Oct 14 19:16:56 1993  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of
	constructor name (2 string), name of _GLOBAL_ demangling (2 strings),
	name of __st* demangling (2 strings).  Did Kung really get the
	more than 95 others right without testing them?

Thu Oct 14 16:27:08 1993  Kung Hsu  ([email protected])

	* gdb.t24/demangle.exp: clean up XFAILS, more than 100

Thu Oct 14 11:40:30 1993  Jeffrey Law  ([email protected])

	* configure.in (configdirs): Add gdb.disasm
	* gdb.disasm: New directory for GDB disassembler tests.
	* gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA.

Thu Oct 14 11:40:30 1993  Jim Kingdon  ([email protected])

	* gdb.t00/help.exp: Don't test "help set".

	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails
	from within expect statements.  None of these happen anymore and
	they cause regressions to be silently unnoticed.

	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure
	messages) about known failures with gcc cygnus-2.4.5-930417.

	* gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on
	comp-info.exp so it gets built if it doesn't exist.

	* gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff;
	it is no longer used.
	* gdb.t13/comp-info.c: Removed.

Wed Oct 13 22:54:06 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Add xfail for sun3.

Thu Oct  7 12:01:03 1993  Jim Kingdon  ([email protected])

	* gdb.t17/interrupt.exp: Add xfail for Irix (currently not really
	relevant because ^C doesn't get sent but failure can be reproduced
	interactively).

Tue Oct  5 10:43:11 1993  Peter Schauer  ([email protected])

	* gdb.stabs/alpha.mt:  New configuration file for alpha.
	* gdb.stabs/configure.in:  Use it.
	* gdb.stabs/ecoff.mt, weird-ecoff.sed:  Change sed script to enable
	sharing with alpha.mt, redefine long to word via preprocessor.
	* gdb.stabs/weird.def:  Conditionally adapt storage layout of v_comb
	for alpha.
	* gdb.stabs/weird.exp:  Handle compilation of weird.s by alpha
	native cc.
	* gdb.t00/teststrategy.exp:  Change expect string so that we
	consume the `(xgdb)' from the command echo and from the gdb prompt.
	* gdb.t05/expr.exp:  xfail "print unsigned int == (~0)" on the alpha.
	gdb currently compares all values as long, so this failure probably
	applies to any configuration where LONGEST is bigger than a target int.
	* gdb.t08/comp-info.c:  New file to determine if gdbme is compiled
	with gcc.
	* gdb.t08/Makefile.in, opaque.exp:  Use it. Alpha native cc is unable
	to handle opaque pointers, gcc is.
	* gdb.t21/gdbme.cc, gdb.t23/gdbme.cc:  operator new takes a size_t
	as first argument. Include <sys/types.h> and change all operator
	new definitions to use size_t.
	* gdb.t21/cplusfuncs.exp:  Handle changes in output for operator new
	now that we use size_t.

Wed Sep 29 00:55:49 1993  Peter Schauer  ([email protected])

        * gdb.t03/ptype.exp, gdb.t15/printcmds.exp:  When constructing
	a long or float array cast all array members to the same type.
        * gdb.t04/setvar.exp:  Handle the decimal output of an unsigned long
	with 64 bit longs.
        * gdb.t07/watchpoint.exp:  Add finish and until variations encountered
	on alpha.
        * gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Add xfails for alpha.

Tue Sep 28 17:26:47 1993  Jim Kingdon  ([email protected])

	* gdb.t24 (demangle.exp): Constructors of templates have names like
	vector<int>::vector(int) not vector<int>::vector<int>(int).  See
	section 14.6 of the ARM.

	* gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form
	"_vt$MoveCmd"; these differ only in name from "_vt$foo", so they
	accomplish little and slow down the testsuite.

	* gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
	Accept spaces various places.

Tue Sep 21 17:28:45 1993  Jim Kingdon  ([email protected])

	* gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function
	with watchpoint enabled.

	* Makefile.in: Remove definition of CC and remove the second
	definition of CXX (the "CXX = gcc" one remains).  These definitions
	were causing backquotes to be expanded within backquotes, which
	doesn't work.

Sat Sep 18 09:43:21 1993  Jim Kingdon  ([email protected])

	* gdb.t17/callfuncs.exp: Add "return 0" to end.

Fri Sep 17 04:41:17 1993  Peter Schauer  ([email protected])

        * gdb.stabs/ecoff.mt:  Remove STABSCC hack.
        * gdb.stabs/weird.exp:  Handle the case where weird.o is compiled
	by mips cc and contains no stabs entries.

Thu Sep 16 17:22:12 1993  Rob Savoye  ([email protected])

	* config/vx-gdb.exp: Use fake device to load files rather than
	NFS.
	* lib/gdb.exp: New proc to do "file" command.
	* config/unix-gdb.exp: Use new "file" proc.

Thu Sep 16 13:45:44 1993  Ian Lance Taylor  ([email protected])

	* config/mips-gdb.exp (gdb_load): Increase timeout to 2400.
	Rework board rebooting slightly.
	(gdb_exit): Don't exit from the remote shell; there isn't one.
	* gdb.stabs/weird.exp: If a program is being debugged already,
	kill it.
	* gdb.t04/setvar.exp: Stop and restart gdb.
	* gdb.t05/expr.exp: Likewise.
	* gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and
	restart gdb and reload the program.
	* gdb.t08/opaque.exp: Likewise.
	* gdb.t12/scope.exp: Likewise.
	* gdb.t13/bitfields.exp: Likewise.
	* gdb.t15/funcargs.exp: Likewise.
	* gdb.t20/classes.exp: Likewise.
	* gdb.t03/ptype.exp: Increase timeout.
	* gdb.t16/printcmds.exp (test_print_string_constants,
	test_print_array_constants): Likewise.
	* gdb.t17/callfuncs.exp (do_function_calls): Likewise.
	* gdb.t20/classes.exp (do_tests): Likewise.
	* gdb.t22/virtfunc.exp (test_virtual_calls): Likewise.

Wed Sep 15 14:24:36 1993  Ian Lance Taylor  ([email protected])

	* gdb.stabs: Renamed *wierd* to *weird*.

Wed Sep 15 10:36:50 1993  Jim Kingdon  ([email protected])

	* gdb.t13/bitfields.exp: Test for bad output rather than waiting
	for timeout.  Add "known gcc 2.4.5 bug" to failure message.

Tue Sep 14 17:16:44 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name.
	(do_tests): Remove xfail for whatis on one_var and two_var.

Wed Sep  8 23:14:23 1993  Rob Savoye  ([email protected])

	* Makefile.in: Made cross building work better by adding
	{RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS.

Tue Sep  7 14:11:52 1993  Jim Kingdon  ([email protected])

	* gdb.t15/{return.c,return.exp,Makefile.in}:
	New test, currently commented out.

Tue Aug 31 16:51:29 1993  Rob Savoye  ([email protected])

	* config/udi-gdb.exp: gdb_exit now kills any isstip processes
	still running and removes the leftover named socket so GDb can do
	clean restarts.

Mon Aug 30 17:55:16 1993  Rob Savoye  ([email protected])

	* gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the
	console, not GDB.
	* config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so
	cross testing works better with "make check"
	* config/unix-gdb: Use default procedures for exit and version.
	* config/vx-gdb.exp: Cleaned up and massaged back to working order
	with the newest VxWorks.

Thu Aug 26 17:50:28 1993  Jim Kingdon  ([email protected])

	* gdb.t20/classes.exp: For "ptype class Base1", continue to accept
	old form.

	* gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a
	name (e.g. devo gdb with gcc 2.4.5), it is still a pass.

	* gdb.t10/crossload.exp: Skip whole file (for now, until we fix it).

	* config/unix-gdb.exp: Remove this version of gdb_exit
	* lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp.
	Rob says he'll look at it when he gets back to testing boards.

Thu Aug 26 07:20:00 1993  Fred Fish  ([email protected])

	* gdb.t22/virtfunc.exp:  Accept missing struct/class names as
	an expected fail for certain ptype commands.

	* gdb.t20/classes.exp:  Update expected results of "ptype class
	Base1" to account for the constructor that now appears in the type.

Wed Aug 25 16:48:05 1993  Fred Fish  ([email protected])

	* configure.in (configdirs):  Restore gdb.t04, which mysteriously
	disappeared from list.
	* config/{udi-gdb.exp, gdb-unix.exp}:  Replace calls to obsolete
	"alldone" proc with call to cleanup and exit.
	* {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp,
	gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp,
	gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp,
	gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp,
	gdb.t12/scope.exp, gdb.t13/bitfields.exp}:  Replace calls to
	"alldone" proc with simple returns that suppress remaining
	tests.  The alldone proc went away many months ago.

Tue Aug 24 11:04:06 1993  Jim Kingdon  ([email protected])

	* gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests.

	* gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O.

Thu Aug 19 22:08:41 1993  Peter Schauer  ([email protected])

	* gdb.t15/funcargs.exp:  Allow arguments for main in backtraces
	as vax gdb will display them.

Thu Aug 19 18:18:59 1993  Jim Kingdon  ([email protected])

	* gdb.t20/gdbme.cc: Do some calculation with v.x, to confound
	optimizers.

	* scope.exp: Change "bad value for localval" messages so each one
	is unique.

	* config/unix-gdb.exp (gdb_exit): Move info on this vs.
	lib/gdb.exp (gdb_exit) from ChangeLog to comments.

	* gdb.t06/signals.exp: Skip the whole file with xfail for delta68.

Tue Aug 17 00:05:28 1993  Jim Kingdon  ([email protected])

	* gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line
	doesn't exist (due to optimization).

Mon Aug 16 21:05:49 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd.exp: Deal with it if echo of "file" command
	contains \r because the filename is long.

	* gdb.t06/signals.exp: Revise comments regarding "'next' behaved as
	'continue'" bug, and change xfail back to i*86-univel-sysv4*.

Mon Aug 16 03:05:17 1993  Peter Schauer  ([email protected])

	* gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Update for vax running
	Ultrix.
	* gdb.t02/whatis.exp:  Use procedure to setup xfails on long versus
	int tests.
	* gdb.t08/opaque.exp:  Use procedure to setup xfails for opaque tests.

Thu Aug 12 15:24:28 1993  Fred Fish  ([email protected])

	* Makefile.in (distclean):  Remove *.log *.plog *.sum *.psum site.*.

	* gdb.t17/interrupt.exp:  Fix 'missing Continuing' case so pattern
	to match does not match the passing case but still matches the 
	failing case.

Thu Aug 12 16:58:59 1993  Jim Kingdon  ([email protected])

	* Makefile.in (distclean): Remove *.plog *.sum *.psum site.*.

Wed Aug 11 19:47:27 1993  John Gilmore  ([email protected])

	* lib/gdb.exp (gdb_exit):  Move the best version of gdb_exit
	to here.  Fix 'Quit anyway.*?' bug (? is a regexp metacharacter).
	* config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}:
	Remove various versions of gdb_exit.
	* config/vx-gdb.exp:  Remove quit_vxgdb, change a caller to call
	gdb_exit.
	* config/unix-gdb.exp:  gdb_exit remains here, and should override
	the generic version, since it's doing a lot of wierd stuff that
	the other versions aren't.  FIXME, fold it in, or abandon this
	version.

Wed Aug 11 12:09:32 1993  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Add tests for PR 3220.

Tue Aug 10 15:49:35 1993  Jim Kingdon  ([email protected])

	* gdb.t24/demangle.exp: Add lucid test for \7f_vtbl__3foo__vt_cc_main_.

Tue Aug 10 15:45:25 1993  Fred Fish  ([email protected])

	* gdb.t07/watchpoint.exp:  Clear xfail with "i*86-*-*", not just
	"i386-*-*".  Works for i486 as well.

	* gdb.t06/signals.exp:  Rework code that recognizes known SVR4
	bug, and expand domain of xfail to all SVR4 systems, since the
	actual problem is likely to be in generic SVR4 /proc support.

Tue Aug 10 15:49:35 1993  Jim Kingdon  ([email protected])

	* config/unix-gdb.exp (gdb_load): Add eof to expect statement.

Tue Aug 10 09:56:56 1993  Fred Fish  ([email protected])

	* gdb.t17/interrupt.exp:  Set up xfail for *-*-sysv4*, in chain of
	xfails for other systems.  Match a missing 'Continuing.' as an
	explicit fail for i*86-*-sysv4*, so it doesn't hose other tests.

	* gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp,
	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp:
	Only issue warning for missing executables if -all option is used.

	* gdb.stabs/wierd.exp:  Only issue warning for missing wierd.o
	file if -all option is used.  It's like an unpredictable XFAIL.

Mon Aug  9 10:13:34 1993  Jim Kingdon  ([email protected])

	* gdb.t15/funcargs.exp: Add comments that hppa xfails are only
	for dynamically linked binaries.

	* gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests.

Sun Aug  8 14:21:29 1993  Jim Kingdon  ([email protected])

	* gdb.t20/inherit.exp: Change message for "print tagless struct"
	to state that this is a known bug in old versions of g++.

Fri Aug  6 21:40:30 1993  Peter Schauer  ([email protected])

	* gdb.t17/interrupt.exp:  Add xfail for 386 bsd. Accept echoed newline
	while waiting for `Continuing'.

Fri Aug  6 13:38:08 1993  Fred Fish  ([email protected])

	* gdb.t10/nodebug.exp:  Expect to find local/global minimal symbols
	in text, data, and bss.
	* gdb.t10/nodebug.c:  Add local and global test variables for
	initialized and uninitialized data.

Thu Aug  5 12:18:40 1993  Jim Kingdon  ([email protected])

	* config/unix-gdb.exp (gdb_exit): Add "wait".

Thu Aug  5 18:14:06 1993  Peter Schauer  ([email protected])

	* gdb.t06/signals.exp:  xfail the continue from the handler for all
	targets.

	* gdb.t07/watchpoint.exp:  clear_xfail for i386 when calling a
	function with watchpoints enabled, the i386 call dummy starts with
	a call.

	* gdb.t00/teststrategy.exp, gdb.t09/Makefile.in:  Handle the way
	386 bsd names its corefiles.

Wed Aug  4 08:53:41 1993  Fred Fish  ([email protected])

	* gdb.t10/Makefile.in (nodebug.o):  Don't use "-c -o", many
	compilers don't grok it.
	* gdb.t16/gdbme.c (ctable1):  Initialize unsigned char array
	with small octal ints rather than character constants, which
	are signed and might not fit if first promoted to int.

Tue Aug  3 18:28:25 1993  Fred Fish  ([email protected])

	* gdb.t09/Makefile.in (clean):  Remove corefile.

Mon Aug  2 12:47:44 1993  Jim Kingdon  ([email protected])

	* gdb.t07/watchpoint.exp: Add missing `$prompt $'.

Mon Aug  2 12:30:14 1993  Peter Schauer  ([email protected])
			  and Jim Kingdon ([email protected])

	* gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for
	NO_SINGLE_STEP machines.  Fix comment about its cause.  Uncomment
	the `continue' test right after it (also xfailed if NO_SINGLE_STEP).

Fri Jul 30 19:46:55 1993  Jim Kingdon  ([email protected])

	* gdb.t17/interrupt.exp: Add xfail for hppa.

Fri Jul 30 12:54:11 1993  Peter Schauer  ([email protected])

	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp,
	gdb.t09/corefile.exp:  Cleanup xfails for fixed mips bugs.
	* gdb.t13/bitfields.exp, gdbme.c:  Examine a variable in the inferior
	to determine signed-ness of bitfields and use the result to setup
	the xfail.
	* gdb.t15/gdbme.c:  Add comments to the two indirect call0a lines.
	* gdb.t15/funcargs.exp:  Use them to step until the second indirect
	call line is reached if necessary.

Thu Jul 29 20:33:08 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd.exp: New test, for nameless baseclasses.

Mon Jul 26 00:15:02 1993  Jim Kingdon  ([email protected])

	* gdb.t06/break.exp: Also test `clear' command.

Wed Jul 21 18:03:38 1993  Jim Kingdon  ([email protected])

	* gdb.t00/teststrategy.exp: Remove extra quote.

	* gdb.t07/watchpoint.exp: Change xfail for calling function with
	watchpoint enabled to be for all non-68k machines.

	* gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test.

Mon Jul 19 23:59:26 1993  Peter Schauer  ([email protected])

	* gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-*
	targets use aout.mt instead of ecoff.mt as gas understands
	standard aout format.

Mon Jul 19 18:14:06 1993  Jim Kingdon  ([email protected])

	* lib/gdb.exp (runto): Don't insist that function we are running to
	was compiled with -g.

	* gdb.t10/{nodebug.{c,exp},Makefile.in}: New test.

	* gdb.t17/interrupt.exp: Before sending ^C, give the inferior time
	to get back into the read system call.
	Accept leading newline in case where we woke it up.

Sun Jul 18 08:40:45 1993  Peter Schauer  ([email protected])

	* gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}:  New files
	to make the stabs test work on ecoff systems using gcc and -with-stabs.
	* gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}:  Modify to
	enable ecoff configuration.

Thu Jul 15 11:54:58 1993  Jim Kingdon  ([email protected])

	* gdb.t15/funcargs.exp (localvars_in_indirect_call): New test.

Wed Jul 14 09:36:42 1993  Jim Kingdon  ([email protected])

	* gdb.t16/printcmds.exp: Add another printf test.

Wed Jul 14 15:37:13 1993  Ian Lance Taylor  ([email protected])

	* configure.in: If configured -with-stabs on any target, add
	stabsdirs to configdirs.

Wed Jul 14 09:36:42 1993  Jim Kingdon  ([email protected])

	* gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is
	fun" so pattern does not match the command itself.

Mon Jul 12 11:22:06 1993  Jim Kingdon  ([email protected])

	* gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames.

Sun Jul 11 12:03:24 1993  Jim Kingdon  ([email protected])

	* gdb.t17/interrupt.exp: Test for more things.

Fri Jul  9 14:11:17 1993  Jim Kingdon  ([email protected])

	* gdb.t07/watchpoint.exp: In until test, deal with the way the DEC
	compiler arranges the code and line numbers.

	* gdb.t17/interrupt.exp: Don't send \n after ^C.

Fri Jul  9 09:47:02 1993  Peter Schauer  ([email protected])

	* gdb.t00/help.exp:  Increase expect input buffer size.

Thu Jul  8 14:26:50 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Remove sparc xfail; bug fixed.

	* gdb.t07/watchpoint.exp: Add xfail for hppa.

	* gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug.

	* gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint
	[0-9]*, not just [0-9].

Wed Jul  7 17:52:28 1993  Jim Kingdon  ([email protected])

	* gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972.

	* gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use.

Tue Jul  6 13:54:49 1993  Jim Kingdon  ([email protected])

	* gdb.t00/help.exp: Replace most of docstring for "continue" with .*.

Mon Jul  5 22:03:45 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.c: Add xfails for sun3.

	* gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836.

	* gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597.  Also add
	test_stepping tests.

Fri Jul  2 09:08:10 1993  Jim Kingdon  ([email protected])

	* gdb.t{06,17}/Makefile.in (clean): Remove all executables.

	* gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug.

	* gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c
	rather than actually putting it through cpp twice.

	* gdb.t06/signals.exp: Add xfails for unixware and rs6000.

Fri Jul  2 10:48:03 1993  Ian Lance Taylor  ([email protected])

	* config/mips-gdb.exp (gdb_exit): Removed close statement which is
	no longer needed.

Fri Jul  2 09:08:10 1993  Jim Kingdon  ([email protected])

	* gdb.t06/signals.exp: Add test for sparc bug with do_save_insn.

	* gdb.t20/{classes,inherit}.exp: If a class which doesn't use any
	C++ features prints as "struct", make it a pass, not an xfail.

Thu Jul  1 22:03:33 1993  Jim Kingdon  ([email protected])

	* gdb.t22/virtfunc.exp: Remove a bunch of xfails.
	Don't require VA to print as "class" rather than "struct".

Thu Jul  1 18:27:40 1993  Jim Kingdon  ([email protected])

	* gdb.t06/twice.exp: Don't care about the file name GDB prints.

Wed Jun 30 18:01:00 1993  Jim Kingdon  ([email protected])

	* gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end.

Tue Jun 29 13:15:42 1993  Peter Schauer  ([email protected])

	* gdb.t12/scope.exp:  Remove xfail for parameter printing in wrong
	order.

Tue Jun 29 09:22:29 1993  Jim Kingdon  ([email protected])

	* gdb.t16/printcmds.exp: Add printf tests.

	* gdb.t06/{twice.{c,exp},Makefile.in}: New test.

	* gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too.

Mon Jun 28 11:25:59 1993  Fred Fish  ([email protected])

	* gdb.t20/classes.exp:  Add clear_xfail's before printing summary
	pass counts, to counteract any existing or future setup_xfails.

Mon Jun 28 09:15:17 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros
	{BEGIN,END}_COMMON for common block instead of STAB.
	* gdb.stabs/wierd.exp: Add xfail for rs6000.

	* gdb.stabs/wierd.def: Make value of N_GSYM's 0.
	intp_var should be N_GSYM not N_LSYM.
	wierd-aout.S: Use a label for the value of the N_SO.
	wierd.def: Remove all backslashes.
	wierd-{aout,xcoff}.S: Put a few tests with backslashes here.

Mon Jun 28 07:21:51 1993  Peter Schauer  ([email protected])

	* gdb.t20/gdbme.cc (main): Move variable initialization for AIX to
	get the expected next to inheritance3.

Sun Jun 27 12:29:53 1993  Peter Schauer  ([email protected])

	* gdb.t00/teststrategy.exp: Remove expected failure for mips-*-*
	now that gcc-2.4 gets it right.

Fri Jun 25 12:00:46 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test.

	* gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of
	generating comp-info.exp which works for cross-compilation.

Thu Jun 24 16:55:05 1993  Fred Fish  ([email protected])

	* gdb.t11/list.exp:  For SVR4 xfails, match "*-*-sysv4*", not
	"*-*-sysv4.*".

Tue Jun 22 21:17:26 1993  Fred Fish  ([email protected])

	* gdb.t01/run.exp:  Start with a fresh gdb.
	* gdb.t11/list.exp:  For SVR4 xfails, match on all versions of
	SVR4.x.

Mon Jun 21 15:23:22 1993  Fred Fish  ([email protected])

	* {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07,
	gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15,
	gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/
	Makefile.in (distclean, realclean):  Remove gdbme.c from list of
	things to remove.

Sat Jun 19 07:49:10 1993  Fred Fish  ([email protected])

	* gdb.t24/demangle.exp (test_gnu_style_demangling):  Add some new
	test cases from bug reports.

Fri Jun 18 10:38:49 1993  Fred Fish  ([email protected])

	* gdb.t06/break.exp:  Add xfails for sparc-sun-solaris2.*.
	* gdb.t12/scope.exp:  Add clear_xfails at appropriate places to
	  avoid spurious xfails.
	* gdb.t20/classes.exp:  Add xfails for longstanding C++ problems.
	* gdb.t21/cplusfuncs.exp:  Add xfails for sparc-sun-solaris2.*.
	* gdb.t22/virtfunc.exp:  Add xfails for longstanding C++ problems.

Wed Jun 16 10:11:57 1993  Fred Fish  ([email protected])

	* gdb.t00/teststrategy.exp:  Rework to provide more useful
	description of each test, fix problem with systems that define
	ALIGN_STACK_ON_STARTUP code, other misc cleanups.
	* gdb.t06/break.exp (test_next_with_recursion):  Fix expected
	results for "next over recursive call" so timeouts aren't taken
	by error.

Mon Jun 14 09:09:04 1993  Jim Kingdon  ([email protected])

	* gdb.t12/scope.exp: Test printing of variables before run.

	* gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are
	printed in wrong order due to sorting.

Sat Jun 12 15:03:58 1993  Fred Fish  ([email protected])

	* gdb.t00/teststrategy.exp:  Fix expected results for printing
	user entered string constant.  Is array of char, prints with no
	address.

	* gdb.t00/{default.exp, help.exp}:  Account for changes to radix
	commands.
	* gdb.t16/gdbme.c:  Add and use struct containing arrays of char.
	* gdb.t16/printcmds.exp:  Fix all lines that match "unsigned char *".
	* gdb.t16/printcmds.exp (test_print_char_arrays):  Test printing
	of struct of char arrays.
	* gdb.t00/radix.exp:  New tests for radix commands.

Fri Jun 11 13:12:27 1993  Jim Kingdon  ([email protected])

	* gdb.t16/printcmd.exp: Print a variable before running program
	(with xfail for AIX).

Thu Jun 10 11:04:04 1993  Jim Kingdon  ([email protected])

	* gdb.t06/{signals.exp,signals.c,Makefile.in}: New test.

	* gdb.t16/printcmd.exp: Don't print variables before running program.

	* gdb.t06/break.exp: Don't require envp argument to main.

	* gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword.

	* gdb.t02/whatis.exp, gdb.t11/list.exp:
	Add xfails for rs6000.

	* gdb.t02/whatis.exp: Change other tests not to re-test something
	we already tested.

	* gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure
	each type used has a variable of that type.

Tue Jun  8 16:45:20 1993  Jim Kingdon  ([email protected])

	* gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure.

Fri Jun  4 11:07:19 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: change srctrigger to be a file, not a directory

Fri Jun  4 08:23:57 1993  Ian Lance Taylor  ([email protected])

	* configure.in (mips-idt-ecoff*): Added trailing '*'.

	* gdb.t11/list.exp: Fixed a couple of typos.

Tue Jun  1 21:28:06 1993  Fred Fish  ([email protected])

	* gdb.t00 (teststrategy.exp):  Remove notice about PR 1823.  Bug
	is fixed and PR is closed.
	* gdb.t16 (gdbme.c):  Add simple test string variable.
	* gdb.t16 (printcmds.exp):  Add tests with simple test string
	variable, primarily for boundaries on "set print elements".

Mon May 31 11:36:08 1993  Jim Kingdon  ([email protected])

	* gdb.stabs/wierd.exp: Remove xfail for printing big integer.
	Make leading 0's optional and don't expect a tab in the middle
	of the number.

	* gdb.t00/teststrategy.exp: Remove xgdb before trying the copy.

	* gdb.stabs/wierd.def: Type attributes must be preceded by number=.
	* gdb.stabs/wierd.exp: Remove xfails for type attributes.  Also
	don't end command passed to gdb_test with newline.

	* gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the
	signed keyword away, don't expect signed bitfields to be signed.

	* gdb.t13/bitfields.exp (bitfield containment): Accept the fields
	printing with only as many 1's as are in the field as well as printing
	with 32 1's (see comment).

Sat May 29 17:57:01 1993  Fred Fish  ([email protected])

	* gdb.t00/default.exp:  Start with a fresh gdb.
	* configure.in (configdirs):  Remove gdb.t31 until the chill
	compiler works again.  It no longer is able to find chillrt0
	since it isn't in libchill.a anymore.
	* gdb.stabs/wierd.exp:  Rewrite to properly handling a missing
	wierd.o, make more modular.
	* gdb.stabs/wierd.def (bad_neg0type, bad_neg0const):  Remove
	spurious newlines that caused problems.

Wed May 26 09:57:19 1993  Jim Kingdon  ([email protected])

	* Move test with enums and partial symbols from gdb.t03/ptype.exp
	to gdb.stabs/wierd.exp since GCC has worked around the bug.
	gdb.stabs/wierd.{exp,def}: Many new tests.

	* gdb.t00/default.exp: update info line for new message.

	* gdb.t02/{whatis.exp,gdbme.c}:
	Test that "char *" doesn't print as "caddr_t".

Tue May 25 13:28:27 1993  Jim Kingdon  ([email protected])

	* gdb.t00/help.exp: Use .* in place of some help messages which
	just changed.
	gdb.t00/default.exp: Update "info frame" test for new message.
	* gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test.
	Remove some xfails

Mon May 24 00:24:47 1993  Jim Kingdon  ([email protected])

	* gdb.t03/{gdbme.c,ptype.exp}:
	Add tests for typedef'd struct and union without tags.
	Also check "whatis" on a variable of a typedef'd enum without a tag.

	* gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see
	PRMS 1823; the bug still exists but isn't reproduced by this test
	anymore), and remove rs6000 XFAIL (the bug is fixed).

	* gdb.t03/ptype.exp: Comment out a lot of tests which are basically
	duplicated from whatis.exp.  For those that are left, accept
	"long", "long int", or "int" for long variables (whatis.exp already
	has an XFAIL for "int", so no need to fail it here).

	* gdb.t02/whatis.exp, gdb.t10/crossload.exp:
	Deal with GCC's names for types now that GDB uses the compiler's names.

	* gdb.t02/{Makefile.in,gdbme.c,whatis.exp}:  If not GCC, do some
	setup_xfail's for sunos4.  If we #defined the signed keyword away,
	don't expect GDB to know that char it is signed.

	* gdb.t00/teststrategy.exp: Update for symbolic signal names.

Sun May 23 08:44:55 1993  Fred Fish  ([email protected])

	* configure.in (configdirs):  Add gdb.t24 for C++ tests that
	should work on any system, regardless of debugging format.
	* gdb.t21/demangle.exp:  Move to gdb.t24.
	* gdb.t24/demangle.exp:  Move from gdb.t21.
	* gdb.t24/{Makefile.in, configure.in}:  New files.

Thu May 20 19:39:03 1993  Jim Kingdon  ([email protected])

	* configure.in: Do gdb.stabs and C++ tests only for stabs.
	* gdb.stabs: New directory.

Tue May 18 21:12:09 1993  Jim Kingdon  ([email protected])

	* config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?"
	not just "Quit anyway?".

Tue May 18 17:13:20 1993  Fred Fish  ([email protected])

	* gdb.t21/demangle.exp:  Add a couple of new patterns.  Ensure
	that all setup_xfails are immediately followed by clear_xfails.

Tue May 11 09:10:47 1993  Fred Fish  ([email protected])

	* config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp,
	gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp,
	gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp,
	gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp,
	gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp,
	gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
	gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
	gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp,
	gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp,
	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp,
	gdb.t31/chillvars.exp, lib/gdb.exp:
	Change place to report bugs from [email protected] to
	[email protected].

Fri May  7 09:15:35 1993  Fred Fish  ([email protected])

	* gdb.t17/callfuncs.exp (do_function_calls):  Call t_double_values
	with 0.0, not integer 0.

Fri Apr 30 13:17:24 1993  Jim Kingdon  ([email protected])

	* gdb.t06/break.exp: Update for "Kill the program" message change.

Fri Apr 30 09:42:57 1993  Fred Fish  ([email protected])

	* Makefile.in (GDBFLAGS):  Set to -nx.
	* Makefile.in (site.exp):  Use GDBFLAGS.

Wed Apr 28 13:19:07 1993  K. Richard Pixley  ([email protected])

	* */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory
	  Makefiles.
	  (check): depend on just-check.
	  (just-check): added so that tests can be run without a noop
	  build pass.

Fri Apr 23 18:13:28 1993  K. Richard Pixley  ([email protected])

	Switch to using configure's configdirs.
	* Makefile.in (Makefile): add configure.in dependency.
	  (SUBDIRS): removed redundant assignment.
	* configure.in: switch subdirs assignment to configdirs.
	* gdb.t*/configure.in: new files.

Thu Apr 22 08:27:53 1993  Ian Lance Taylor  ([email protected])

	* gdb.t07/watchpoint.exp: Removed a29k expected failure which now
	works.

Tue Apr 20 13:38:40 1993  Fred Fish  ([email protected])

	* gdb.{t20,t21,t22,t23}/Makefile.in:  Use $(srcdir) to avoid $<
	in explicit rules.  Apparently this is not supported by some makes.

Mon Apr 19 01:54:53 1993  John Gilmore  ([email protected])

	* gdb.t31/Makefile.in:  Use $(srcdir) when avoiding $<, sigh.

Fri Apr 16 09:33:46 1993  Peter Schauer  ([email protected])

	* config/unix-gdb.exp:  Add back missing return 0 which mysteriously
	disappeared.

Thu Apr 15 02:28:24 1993  John Gilmore  ([email protected])

	* gdb.t31/Makefile.in:  Avoid $< in explicit rule.

Wed Apr 14 16:38:47 1993  Fred Fish  ([email protected])

	* gdb.t07/watchpoint.exp:  Remove setup_xfail for i486
	watchpoint problem that is now fixed.
	* gdb.t30/chexp.exp:  Remove setup_xfail for printing
	uninitialized convenience variables.
	* gdb.t31/chillvars.exp:  Fix expected patterns for printing
	structures.

Wed Apr 14 12:55:58 1993  Peter Schauer  ([email protected])

	* gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS
	which causes expect to get out of sync with gdb on long output
	from help set.
	* gdb.t09/corefile.exp: Make expected pattern for core file
	failing signal and frame output format less sun specific.

Tue Apr 13 23:18:07 1993  Per Bothner  ([email protected])

	* gdb.t31/chillvars.exp:  Add and remove initial dummy
	breakpoint, so that symbol table is forced in.
	(Needed at least on Sunos4, though it seems not SVR4.)
	* gdb.t31/chillvars.exp:  Update for changed output format.

Sun Apr 11 17:21:45 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path.

Wed Apr  7 21:28:21 1993  Rob Savoye  ([email protected])

	* Makefile.in: Added --srcdir when invoking runtest, removed the
	need for a local config file. (optional now)

Wed Apr  7 14:13:41 1993  Fred Fish  ([email protected])

	* gdb.t21/demangle.exp:  Only count real fails (not xfails) for
	failure count used to force early termination.  Add some more
	expected failures for gnu style demangling.

Thu Apr  1 09:50:30 1993  Peter Schauer  ([email protected])

	* Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the
	pmi variable from gdb.t20/gdbme to get optimized away.
	* gdb.t00/teststrategy.exp: Added expected failure for mips-*-*.
	Check for written corefile upon timeout _and_ eof.

Tue Mar 30 09:58:16 1993  Peter Schauer  ([email protected])

	* config/unix-gdb.exp:  Add missing return 0.

Tue Mar 30 08:34:25 1993  Peter Schauer  ([email protected])

	* gdb.t16/printcmds.exp:  Remove misplaced xfail that caused an early
	test termination.

Mon Mar 29 17:37:25 1993  Fred Fish  ([email protected])

	* configure.in (subdirs):  Put back gdb.t17 which mysteriously
	disappeared.

Thu Mar 25 21:05:16 1993  Fred Fish  ([email protected])

	* gdb.t10/crossload.exp:  Disable the i860-elf test until such
	time as i860 support works.

	* gdb.t15/funcargs.exp:  Fix expected outputs to include 
	"backtrace 100\r" rather than just "backtrace\r", to match last
	change.

Thu Mar 25 12:14:28 1993  Ian Lance Taylor  ([email protected])

	* config/udi-gdb.exp (gdb_exit): Remove close command.
	(gdb_target_udi): New procedure to set the UDI target.
	(gdb_start): Don't remove *_soc files.  Use gdb_target_udi.
	* gdb.t00/default.exp: Added expected failures for a29k-*-udi.
	Added waits for prompts after several question responses.  Added
	some more responses used by a29k-amd-udi-gdb.
	* gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
	pass different arguments, restart UDI connection after program
	completion.
	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
	gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
	* gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
	gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
	gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
	gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
	after program completion.
	* gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
	compiled with a SELECT_VECS setting.
	* gdb.t15/funcargs.exp: Use argument to backtrace to prevent
	infinite recursion.

	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
	Added checks for COFF results, and made them expected failures for
	all targets.  It would be better to make them expected failures
	for COFF targets only.

Wed Mar 24 14:43:38 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

	* Makefile.in: add null dvi target, don't bother to recurse
	through test directories for info and install-info; rename
	$(datadir) to be dejagnu instead of deja-gnu

Wed Mar 24 09:48:03 1993  Fred Fish  ([email protected])

	* gdb.t31/gdbme.ch:  Re-enable code that previously caused
	compiler to coredump.
	* gdb.t31/chillvars.exp:  Re-enable tests that depend on that
	code.

Tue Mar 23 08:53:42 1993  Fred Fish  ([email protected])

	* gdb.t31/gdbme.ch:  Comment out code that causes chill compiler
	coredump.
	* gdb.t31/chillvars.exp:  Comment out tests that depend on that
	code.

Sun Mar 21 17:56:47 1993  Rob Savoye  (rob at darkstar.cygnus.com)

	* gdb.t03/ptype.exp: tests for return code from gdb_test.
	* gdb.t00/teststrategy.exp: Uses which proc rather than spawning
	which in a shell. Deletes xgdb when done.
	* config/unix-gdb.exp: Won't try to spawn $GDB unless it exists.
	Tests the return from the "set height" or "set width" commands.
	Added a few return codes where needed.

Wed Mar 17 11:31:01 1993  Fred Fish  ([email protected])

	* Makefile.in (SUBDIRS):  Add gdb.t17.
	* configure.in (subdirs):  Add gdb.t17.
	* gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}:  New test
	files to test gdb's calling of functions in the inferior with
	the correct arguments and gdb's ability to retrieve any
	result returned.

Tue Mar 16 15:37:11 1993  Fred Fish  ([email protected])

	* config/unix-gdb.exp (gdb_exit):  Remove close commands that
	may be called after gdb goes away.  Previous versions of expect
	needed these to avoid file descriptor leaks, but they cause
	errors with the current revision of expect.
	* gdb.t00/gdbvars.exp:  Use -re on expected output after
	setting sevenbit-strings.
	* gdb.t04/setvar.exp, gdb.t13/bitfields.exp:  Make commands
	to set sevenbit-strings consistent across tests.
	gdb.t30/chexp.exp, gdb.t31/chillvars.exp:  Make commands to
	set sevenbit-strings consistent across tests.

Fri Mar 12 08:47:20 1993  Fred Fish  ([email protected])

	* gdb.t21/demangle.exp (proc demangle):  Adjust quotes in an
	expected output to match current "expect" expectations.

Wed Mar 10 18:01:49 1993  Fred Fish  ([email protected])

	* gdb.t00/default.exp:  Change expected output for default "source"
	command, to match new gdb behavior which requires a filename to
	source.

Tue Mar  9 11:00:56 1993  Fred Fish  ([email protected])

	* gdb.t07/watchpoint.exp (test_simple_watchpoint):  Set up
	expected fail for i486-*-* that misses the marker2 function.
	* gdb.t10/crossload.exp (bfddefault):  Allow successful
	recognition of a format to pass even if no symbols are found.
	Explicitly catch failures where the format is not recognized
	or is ambiguous, and add the reason to the fail message.
	* gdb.t10/crossload.exp (bfdexplicit):  Catch failure where
	the cause is and invalid target and add reason to failure message.
	* gdb.t10/crossload.exp:  Fix bfd target names for elf32-m68k,
	elf32-i386, elf32-sparc, and elf32-i860.
	* gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
	Set up expected failure for 'filename'::variable scope resolution,
	which is now apparently broken on all targets.
	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
	gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
	gdb.t23/templates.exp:   Change failure for missing binfile into
	just a warning.
	gdb.t21/demangle.exp:  Change all cfront references to 'arm'
	references.

Mon Mar  8 19:20:28 1993  Fred Fish  ([email protected])

	* gdb.t00/default.exp:  Add expected output for default "source"
	command, to match new gdb behavior.
	* gdb.t09/corefile.exp:  Use GDBFLAGS when spawning GDB.

Sun Mar  7 15:14:09 1993  Rob Savoye  ([email protected])

	* config/*-gdb.exp: returns an error, rather than exiting on
	internal errors.

Tue Mar  2 18:09:32 1993  Fred Fish  ([email protected])

	* gdb.t03/gdbme.c:  Add pointer to struct variable.
	* gdb.t03/ptype.exp:  Test equivalence of '.' and '->' for
	referencing struct members.

Thu Feb 25 10:39:06 1993  Ian Lance Taylor  ([email protected])

	* configure.in (mips-idt-ecoff): New target.
	* config/mips-gdb.exp: New file for remote board using MIPS remote
	debugging protocol.

	* Redid configuration scheme.  Removed gdb.t*/configure.in.
	Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*.  Changed to use CC, CXX
	instead of CC_FOR_TARGET, CXX_FOR_TARGET.  Added mostlyclean and
	distclean targets.  Built executables via .o files.  Adjusted
	tests to account for source files in $(srcdir) rather than
	$(objdir).
	* lib/gdb.exp (runto): Don't expect () after the function name,
	because it may have arguments.

Wed Feb 24 08:05:38 1993  Ian Lance Taylor  ([email protected])

	* gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp,
	gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
	expected failures for mips-idt-* and mips-sgi-*.
	* gdb.t00/default.exp (attach): Kill process if requested.
	* gdb.t00/help.exp (help target core, help target): Accept a gdb
	that does not read core files.
	* gdb.t01/run.exp: Removed checks for exit status code.
	* gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
	it is linked in.
	* gdb.t03/ptype.exp: Increase timeout when calling malloc.
	* gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
	appropriate, rather than doing it by hand.
	* gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
	execution.
	* gdb.t10/crossload.exp: Kill existing program if needed.
	* gdb.t15/funcargs.exp: Use delete_breakpoints function where
	appropriate, rather than doing it by hand.  Always increase
	timeout for this test, not just for VxWorks.

Wed Feb 24 08:03:38 1993  Fred Fish  ([email protected])

	* gdb.t31/chillvars.exp (test_structs):  New proc to test printing
	of Chill STRUCT types and STRUCT values.
	* gdb.t31/chillvars.exp (test_strings):  Expect "CHAR" now, rather
	than "char".
	* gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
	struct2):  New struct definitions and initializations to test 
	simple Chill STRUCT types.

Tue Feb 23 11:55:06 1993  Fred Fish  ([email protected])

	* gdb.t00/teststrategy.exp:  Track reversion in gdb to not print
	the null byte at the end of strings.
	* gdb.t00/default.exp:  Make show version insensitive to copyright
	date.
	* gdb.t16/in-gdbme.c (ctable1, ctable2):  Make explicitly unsigned
	to avoid dependencies on target char signedness.
	* gdb.t16/printcmds.exp:  Update expected results for explicitly
	unsigned char.
	* gdb.t16/printcmds.exp:  Remove setup_xfails for i960 that should
	now work.
	* gdb.t21/demangle.exp:  Add many more patterns for template
	demangling, most of them being expected failures.
	* gdb.t21/demangle.exp (proc demangle):  Quote the demangled
	string we are matching for, to match on the whole string.
	* gdb.t21/demangle.exp:  Add many new test strings to demangle,
	and fix a whole bunch that had incorrect expected output but were
	passing anyway because of the bug in "proc demangle".
	* gdb.t31/chillvars.exp:  Remove setup_xfail for printing string
	type.
	* gdb.t31/in-gdbme.ch:  Uncomment string4, now compiles.

Mon Feb 22 07:54:03 1993  Mike Werner  ([email protected])

        * gdb/testsuite: made modifications to testcases, etc., to allow
        them to work properly  given the reorganization of deja-gnu and the
        relocation of the testcases from deja-gnu to a "tool" subdirectory.

Sun Feb 21 10:55:55 1993  Mike Werner  ([email protected])

	* gdb/testsuite: Initial creation of gdb/testsuite.
	Migrated dejagnu testcases and support files for testing nm to
	gdb/testsuite from deja-gnu.  These files were moved "as is"
	with no modifications.  This migration is part of a major overhaul
	of dejagnu.  The modifications to these testcases, etc., which
	will allow them to work with the new version of dejagnu will be
	made in a future update.
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: