* as.h (know): Don't define as empty.

[binutils.git] / gdb / ChangeLog

2009-10-16  Michael Eager  <[email protected]>

	* microblaze-linux-tdep.c:
	microblaze_linux_memory_remove_breakpoint(): Add gdbarch to param,
	replace frame_pc_unwind with get_frame_address_in_block.
	* microblaze-tdep.c: Remove MICROBLAZE_REGISTER_SIZE.
	* microblaze-tdep.h: Add MICROBLAZE_REGISTER_SIZE.

2008-10-15  Steven G. Kargl  <[email protected]>  (tiny patch)

	* amd64fbsd-nat.c (amd64fbsd_supply_pcb): Conditionally compile in
	support for pcb->pcb_{fs,ds,es,gs} on FreeBSD older than 8.0.

2009-10-15  Michael Eager  <[email protected]>

	* config/djgpp/fnchange.lst: Add translations for cpu-microblaze.c,
	elf32-microblaze.c, microblaze-rom.c, microblaze-linux-tdep.c,
	microblaze-tdep.h, microblaze-tdep.c, microblaze-opc.h,
	microblaze-opcm.h, microblaze-dis.c, microblaze-dis.h, sim/microblaze,
	microblaze.h, and microblaze.isa.
	* configure.tgt: Add targets microblaze*-linux-*, microblaze*-xilinx-*.
	* Makefile.in: Build microblaze-tdep.o, microblaze-linux-tdep.o.
	HFILES_NO_SRCDIR: Add microblaze-tdep.h.
	* microblaze-linux-tdep.c: New.
	* microblaze-tdep.c: New.
	* microblaze-tdep.h: New.
	* NEWS: Announce Xilinx MicroBlaze support.

2009-10-15  Paul Pluzhnikov  <[email protected]>

	PR gdb/10757
	* linux-nat.c (linux_nat_post_attach_wait): Adjust assert.
	(lin_lwp_attach_lwp, linux_nat_attach): Handle disappearing LWP.
	
2009-10-15  Michael Snyder  <[email protected]>

	* record.c (record_insn_max_num): Make unsigned.
	(_initialize_record): Use uinteger instead of zinteger for
	set command, so that it will report "unlimited" for zero.

2009-10-15  Michael Snyder  <[email protected]>

	* record.c (record_reg_alloc): New function.
	(record_reg_release): New function.
	(record_mem_alloc): New function.
	(record_mem_release): New function.
	(record_end_alloc): New function.
	(record_end_release): New function.
	(record_entry_release): New function.
	(record_list_release): Simplify, call record_entry_release.
	(record_list_release_next): Rename to record_list_release_following.
	Simplify and call record_entry_release.
	(record_list_release_first): Simplify, comment, and use
	record_entry_release.
	(record_arch_list_add_reg): Simplify, call record_reg_alloc.
	(record_arch_list_add_mem): Simplify, call record_mem_alloc.
	(record_arch_list_add_end): Simplify, call record_end_alloc.

2009-10-14  Michael Snyder  <[email protected]>

	* record.c (record_list_release_first): Do not decrement
	record_insn_num.
	(set_insn_num_max): Remove printf.
	Decrement record_insn_num in the loop.

2009-10-14  Cary Coutant  <[email protected]>

	* dwarf2read.c (read_import_statement): Call follow_die_ref_or_sig.

2009-10-14  Keith Seitz  <[email protected]>

	* dwarf2read.c (dwarf2_const_value): Fix order of arguments to
	store_unsigned_integer.

2009-10-14  Pedro Alves  <[email protected]>

	* configure.ac (build_warnings): Add -Wunused-value.
	* configure: Regenerate.

2009-10-14  Tristan Gingold  <[email protected]>

	* solib-darwin.c: Remove trailing whitespaces.
	(darwin_dyld_version_ok): Fix typo.

2009-10-14  Andrew Stubbs  <[email protected]>

	* sh-tdep.c (sh_gdbarch_init): Add show_regs settings for
	bfd_mach_sh3_nommu, bfd_mach_sh2a_nofpu_or_sh3_nommu,
	bfd_mach_sh2a_or_sh3e, bfd_mach_sh2a_or_sh4, bfd_mach_sh4_nommu_nofpu,
	and bfd_mach_sh2a_nofpu_or_sh4_nommu_nofpu.
	Move bfd_mach_sh2a_or_sh4 to use the same configuration as
	bfd_mach_sh4.

2009-10-13  Daniel Jacobowitz  <[email protected]>

	* arm-tdep.c (arm_push_dummy_call): Set the low bit of LR for
	a Thumb entry point.
	(thumb_get_next_pc): Handle Thumb-2 and ARM v6 instructions.  Refuse
	to single step into IT blocks.

2009-10-13  Pedro Alves  <[email protected]>

	* infcall.c (call_function_by_hand): Formatting.

2009-10-13  Tristan Gingold  <[email protected]>

	* solib-darwin.c: Add an empty line after comment for functions.
	(struct gdb_dyld_all_image_infos): Improve comment.
	(DYLD_VERSION): Removed and replaced by ...
	(DYLD_VERSION_MAX, DYLD_VERSION_MIN): ... New macros.
	(darwin_dyld_version_ok): New function.
	(darwin_load_image_infos): Call darwin_dyld_version_ok.
	(darwin_current_sos): Ditto.
	(darwin_solib_create_inferior_hook): Ditto.

2009-10-13  Tristan Gingold  <[email protected]>

	* machoread.c: Add an empty line after comment for functions.
	(oso_el_compare_name): New function.
	(macho_add_oso_symfile): New function.
	(macho_oso_symfile): Use macho_add_oso_symfile.  Sort the oso
	and optimize accesses to libraries.

2009-10-13  Tristan Gingold  <[email protected]>

	* objfiles.c (objfile_has_symbols): New function.
	* objfiles.h (objfile_has_symbols): Add prototype.
	* symfile.c (symbol_file_add_with_addrs_or_offsets): Call
	objfile_has_symbols.
	(reread_symbols): Ditto.

2009-10-12  Jiang Jilin  <[email protected]>

	* i386-tdep.c (i386_process_record): Add xgetbv/xsetbv
	instructions support.

2009-10-11  Pedro Alves  <[email protected]>

	* procfs.c (procfs_make_note_section): Go back to only outputing
	an NT_PSTATUS note when UNIXWARE is defined.

2009-10-11  Daniel Jacobowitz  <[email protected]>

	* features/xinclude.dtd: Correct EMPTY typo.

2009-10-10  Michael Snyder  <[email protected]>

	* i386-tdep.c (i386_process_record): Or-equals, not not-equals.

2009-10-10  Pedro Alves  <[email protected]>

	* mi/mi-cmd-stack.c (list_args_or_locals): Use internal_error.
	Put "break" statements on their own line.

2009-10-09  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_nat_wait_1): Bail out, if TARGET_WNOHANG and
	we found no event while waiting for a specific LWP.
	* infrun.c (handle_inferior_event): Handle TARGET_WAITKIND_IGNORE
	before anything else.

2009-10-09  Pedro Alves  <[email protected]>

	* procfs.c (procfs_make_note_section): Always output a NT_PSTATUS
	note when NEW_PROC_API is defined.

2009-10-09  Pedro Alves  <[email protected]>

	* corelow.c (core_has_fake_pid): New.
	(core_close): Clear it.
	(add_to_thread_list): Fake a pid if one is not found on a Solaris
	core.  Add the inferior here.  Always add the thread, don't use
	thread_change_ptid.
	(core_open): Don't add the main thread or the inferior here unless
	we find that the core had no .reg/NN sections.
	(get_core_register_section): Handle Solaris cores with fake pids.

	* corelow.c (add_to_thread_list): Fix typo.

2009-10-08  Paul Pluzhnikov  <[email protected]>

	PR gdb/10457
	* elfread.c (elf_symtab_read): Don't use alloca in a loop.
	
2009-10-07  Jan Kratochvil  <[email protected]>

	* i386-nat.c (i386_stopped_by_hwbp): Remove.

2009-10-07  Joel Brobecker  <[email protected]>

	* NEWS: Update following the GDB 7.0 release.

2009-10-07  Pierre Muller  <[email protected]>

	ARI fix: OP eol rule.
	* doublest.c (floatformat_from_length): Avoid operator at end of line.
	* dwarf2-frame.c (dwarf2_build_frame_info): Idem.
	* dwarf2read.c (read_array_order, dwarf_decode_macros): Idem.
	* eval.c (evaluate_subexp_standard): Idem.
	* event-loop.c (create_timer, handle_timer_event): Idem.
	* expprint.c (print_subexp_standard): Idem.
	* f-exp.y (variable): Idem.
	* f-typeprint.c (f_print_type): Idem.

2009-10-06  Pierre Muller  <[email protected]>

	ARI fix: OP eol rule.
	* blockframe.c (find_pc_partial_function): Avoid operator at end of
	line.
	* buildsym.c (find_symbol_in_list): Idem.
	(start_subfile, patch_subfile_names): Idem.
	* c-exp.y (variable, yylex): Idem.
	* c-typeprint.c (c_print_type, c_type_print_base): Idem.
	* c-valprint.c (c_val_print): Idem.
	* coffread.c (patch_opaque_types, process_coff_symbol): Idem.
	* corelow.c (core_open): Idem.
	* cris-tdep.c (move_reg_to_mem_movem_op): Idem.
	* cli/cli-decode.c (help_cmd_list, find_command_name_length): Idem.

2009-10-06  Pierre Muller  <[email protected]>

	ARI fix: OP eol rule.
	* ada-exp.y (block_lookup): Avoid operator at end of line.
	* aix-thread.c (pd_enable): Idem.
	* alpha-tdep.c (alpha_next_pc): Idem.
	* arm-tdep.c (arm_skip_prologue, arm_scan_prologue): Idem.
	(condition_true, coff_sym_is_thumb): Idem.

2009-10-06  Joel Brobecker  <[email protected]>

	GDB 7.0 released.

2009-10-06  Pierre Muller  <[email protected]>

	ARI fix: "%p" rule.
	* target.c (debug_to_thread_architecture): Replace %p by %s using
	host_address_to_string function.

2009-10-06  Tristan Gingold  <[email protected]>

	* darwin-nat.c: Add __TEXT __info_plist content.
	(darwin_attach_pid): Update error message.

2009-10-06  Joel Brobecker  <[email protected]>

	* MAINTAINERS: Add Tristan Gingold as Maintainer of the Darwin port.

2009-10-06  Joel Brobecker  <[email protected]>

	* MAINTAINERS: Add Jan Kratochvil as Maintainer of the ia64 target.

2009-10-05  Pedro Alves  <[email protected]>

	Revert:
	2009-10-04  Pedro Alves  <[email protected]>
	* gdbinit.in: Set data-directory to @srcdir@.

2009-10-04  Pedro Alves  <[email protected]>

	* NEWS: Mention non-stop mode.

2009-10-04  Pedro Alves  <[email protected]>

	* gdbinit.in: Set data-directory to @srcdir@.

2009-10-02  Pedro Alves  <[email protected]>

	* linux-nat.c (TRAP_IS_SYSCALL, TRAP_REMOVE_SYSCALL_FLAG): Delete.
	(SYSCALL_SIGTRAP): New.
	(status_to_str): Adjust.
	(get_pending_status): Pending events in lp->waitstatus don't map
	to any signal.  Simplify.
	(linux_handle_syscall_trap): New.
	(linux_handle_extended_wait): When handling PTRACE_EVENT_CLONE
	events, use linux_ops->to_resume instead of direct ptrace with
	PTRACE_CONT.  Remove all TRAP_IS_SYSCALL handling.
	(wait_lwp): Handle syscall traps with linux_handle_syscall_trap,
	and clear the sysgood bit.
	(status_callback): Make it clearer and add comments.
	(cancel_breakpoints_callback): Ignore if LP has waitstatus set.
	(linux_nat_filter_event): Handle syscall traps with
	linux_handle_syscall_trap, and clear the sysgood bit.  Move the
	check for storing siginfo to after handling extended statuses and
	syscall traps.  Store status in the lwp object.
	(linux_wait_1): Don't swap the pending status out of the lwp
	object until after deciding we found an lwp with an interesting
	event.  Requeue a new pending signal if we find one while getting
	rid or a pending SIGSTOP we sent ourselves.  Don't clear the
	sysgood bit here.

	* infrun.c (deal_with_syscall_event): Rename to ...
	(handle_syscall_event): ... this.  Always context switch and set
	stop_pc, even if not catching the syscall.  If not catching the
	syscall, always resume with keep_going.
	(handle_inferior_event): Adjust.

2009-10-02  Jan Kratochvil  <[email protected]>

	Fix compatibility of --with-system-readline and readline-6.0+.
	* configure.ac <--with-system-readline> (for readline_echoing_p): New
	test.
	* config.in: Regenerate.
	* configure: Regenerate.

2009-10-01  Joel Brobecker  <[email protected]>

	* MAINTAINERS: Move Don Lee to the correct section (Write After
	Approval).

2009-10-01  Phil Muldoon  <[email protected]>

	* infcall.c (call_function_by_hand): Add a new cleanup branch for
	std::terminate breakpoints.

2009-09-29  Jan Kratochvil  <[email protected]>

	* ia64-tdep.c (ia64_convert_from_func_ptr_addr): New variable buf.
	Check first the descriptor memory is readable.

2009-09-29  Tom Tromey  <[email protected]>

	* python/py-value.c (valpy_string): NULL-terminate 'keywords'.

2009-09-29  Ulrich Weigand  <[email protected]>

	* s390-tdep.c (s390_displaced_step_fixup): Use type ULONGEST
	instead of CORE_ADDR for "amode".

2009-09-29  Joel Brobecker  <[email protected]>

	* ia64-tdep.c: Update the comments on how we insert/remove
	breakpoints for L-X instructions.
	(ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint):
	Update the comments inside these functions.

2009-09-28  Ulrich Weigand  <[email protected]>

	* gdbarch.sh (displaced_step_hw_singlestep): New callback.
	* gdbarch.c, gdbarch.h: Regenerate.
	* arch-utils.c (default_displaced_step_hw_singlestep): New function.
	* arch-utils.h (default_displaced_step_hw_singlestep): Add prototype.

	* ppc-linux-tdep.c (ppc_displaced_step_hw_singlestep): New function.
	(rs6000_gdbarch_init): Install it.

	* infrun.c (displaced_step_fixup): Use new callback to determine
	whether to "step" or "continue" displaced copy.
	(resume): Likewise.  Do not call maybe_software_singlestep
	for displaced stepping.
	(maybe_software_singlestep): Do not handle displaced stepping.

2009-09-28  Ulrich Weigand  <[email protected]>

	* eval.c (evaluate_subexp_standard) [OP_OBJC_MSGCALL]: Support
	platforms that use function descriptors.  Prefer to use function
	pointer types instead of function types.
	* linespec.c (decode_objc): Support function descriptors.  Fully
	initialize SAL result.
	* objc-lang.c (find_methods): Support function descriptors.
	Do not require function symbol to point to text section.

	* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): When calling
	via a function pointer, use the descriptor it points to.

2009-09-28  Jan Kratochvil  <[email protected]>

	Fix ia64 breakpoints in the L-X slot.
	* ia64-tdep.c (ia64_memory_insert_breakpoint): Extend the comment.
	New variable shadow_slotnum, use it appropriately instead of slotnum.
	Move shadow_len initialization before SLOTNUM adjustment, cover now the
	whole remaining bundle.  Error now on breakpoints requested for the
	slot 2 of L-X bundles.  Better sanity check the requested slot 1 of L-X
	bundles.
	(ia64_memory_remove_breakpoint): New variable shadow_slotnum, use it
	appropriately instead of slotnum.  Warn now on breakpoints requested
	for the slot 2 of L-X bundles.  Better sanity check the requested slot
	1 of L-X bundles.  Update the assertio check of PLACED_SIZE.
	(ia64_breakpoint_from_pc): New variable shadow_slotnum, use it
	appropriately instead of slotnum.  Move *lenptr initialization before
	SLOTNUM adjustment, cover now the whole remaining bundle.  Error now
	on breakpoints requested for the slot 2 of L-X bundles.  Better sanity
	check the requested slot 1 of L-X bundles.  Simplify the returned
	expression.

2009-09-28  Joel Brobecker  <[email protected]>

	* ia64-tdep.c (ia64_memory_insert_breakpoint): Check the slotnum
	and the type of instruction before deciding which slot to save
	in the breakpoint shadown contents.

2009-09-28  Doug Evans  <[email protected]>

	* linux-nat.c (status_to_str): Handle TRAP_IS_SYSCALL.
	(TRAP_REMOVE_SYSCALL_FLAG): New macro.
	(linux_nat_wait_1): Mask off is-syscall bit in wait status for
	TRAP_IS_SYSCALL before passing value to caller.

2009-09-28  Ulrich Weigand  <[email protected]>

	* valops.c (value_assign): Respect parent offset when
	assigning to a bitfield.

2009-09-28  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Remove "0x" that
	don't need.

2009-09-27  Ulrich Weigand  <[email protected]>

	* s390-tdep.c (op_bctr, op_bctgr, op_bct, op1_bctg, op2_bctg,
	op_bxh, op1_bxhg, op2_bxhg, op_bxle, op1_bxleg, op2_bxleg,
	op1_brct, op2_brct, op1_brctg, op2_brctg, op_brxh, op1_brxhg,
	op2_brxhg, op_brxle, op1_brxlg, op2_brxlg): New enum values.
	(is_rsi, is_rie): New insn format decoder routines.
	(s390_displaced_step_fixup): New function.
	(s390_gdbarch_init): Install displaced stepping routines.

2009-09-27  Ulrich Weigand  <[email protected]>

	* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*):
	Add linux-tdep.o to gdb_target_obs.
	(s390*-*-*): Likewise.

2009-09-27  Don Lee  <[email protected]>

	* score-tdep.c: Comment out some simulator dependent codes.
	* score-tdep.h: Delete some simulator dependent macro definitions.

2009-09-27  Hui Zhu  <[email protected]>

	* record.c (record_open): Change "query" to "error".
	(cmd_record_stop): Change "query" to "printf_unfiltered".

2009-09-26  Pierre Muller  <[email protected]>

	* i386-nat.c (i386_stopped_data_address): Also check that
	hitted watch register is not vacant.

2009-09-25  Tom Tromey  <[email protected]>

	PR python/10664:
	* language.h (struct language_defn) <la_get_string>: Add
	'char_type' argument.
	(LA_GET_STRING): Likewise.
	(default_get_string, c_get_string): Update.
	* language.c (default_get_string): Add 'char_type' argument.
	* c-valprint.c (c_textual_element_type): Rename from
	textual_element_type.  No longer static.  Update callers.
	* c-lang.h (c_textual_element_type): Declare.
	* c-lang.c (c_get_string): Add 'char_type' argument.

2009-09-25  Tom Tromey  <[email protected]>

	* charset.c (iconv_open): Use UTF-16 and UTF-32, not UCS-2 and
	UCS-4.
	(iconv): Rename 'ucs_flag'.
	(GDB_DEFAULT_TARGET_WIDE_CHARSET): Use UTF-32.
	* c-lang.c (charset_for_string_type): Use UTF-16 and UTF-32, not
	UCS-2 and UCS-4.
	(convert_ucn): Use UTF-32.

2009-09-25  Nick Roberts  <[email protected]>

	* mi/gdb-mi.el: Remove file.

2009-09-23  Joel Brobecker  <[email protected]>

	* record.c (record_open, record_store_registers, record_xfer_partial):
	Replace calls to nquery by calls to query.

2009-09-23  John Wright  <[email protected]>

	PR gdb/10684:
	* event-top.c (command_line_handler): Terminate linebuffer before
	xstrdup.

2009-09-22  Joel Brobecker  <[email protected]>

	* solib.c (solib_bfd_open): Relax a bit the compatibility check.

2009-09-22  Daniel Jacobowitz  <[email protected]>

	* source.c (forget_cached_source_info): Clear last_source_visited.
	(init_last_source_visited): Delete.
	(directory_command): Do not clear last_source_visited.  Call
	forget_cached_source_info only if required.
	(unset_substitute_path_command, set_substitute_path_command): Call
	forget_cached_source_info.
	* mi/mi-cmd-env.c (mi_cmd_env_dir): Do not call
	init_last_source_visited.
	* defs.h (init_last_source_visited): Delete declaration.

2009-09-22  Tom Tromey  <[email protected]>

	PR gdb/10583:
	* python/py-value.c (valpy_int): Use PyLong_FromLongLong.
	(valpy_long): Likewise.

2009-09-22  Tom Tromey  <[email protected]>

	PR python/10680:
	* eval.c (evaluate_subexp_standard) <do_call_it>: Handle internal
	functions in EVAL_AVOID_SIDE_EFFECTS case.

2009-09-22  Jie Zhang  <[email protected]>

	* MAINTAINERS: Add myself under Write After Approval.

2009-09-22  Pierre Muller  <[email protected]>

	* windows-nat.c (ctrl_c_handler): Also handle CTRL_BREAK_EVENT.

2009-09-18  Keith Seitz  <[email protected]>

	* cp-support.h (cp_validate_operator): Declare new function.
	* cp-support.c (cp_validate_operator): New function.
	* linespec.c (decode_compound): For C++ check for a valid operator.

2009-09-21  Keith Seitz  <[email protected]>

	* c-exp.y (qualified_name): Call CHECK_TYPEDEF before deciding
	that a type is not an aggregate type.

2009-09-21  Jason Orendorff  <[email protected]>

	PR python/10666:
	* python/py-function.c (fnpy_init): Use xstrdup.

2009-09-21  Jie Zhang  <[email protected]>

	* doc/gdb.texinfo: Escape "{" and "}".

2009-09-21  Phil Muldoon <[email protected]>

	PR python/10633

	* c-lang.c (c_printstr): Do not loop past  options->print_max when
	iterating with wchar_iterate.

2009-09-21  Phil Muldoon <[email protected]>

	* python/py-value.c (valpy_getitem): Test value before allowing
	subscript operation.

2009-09-21  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* amd64-linux-tdep.c (amd64_all_but_ip_registers_record): New
	function.
	(amd64_linux_syscall_record): Call
	amd64_all_but_ip_registers_record if syscall is
	sys_rt_sigreturn.
	(AMD64_LINUX_redzone, AMD64_LINUX_xstate,
	AMD64_LINUX_frame_size): New macros.
	(amd64_linux_record_signal): New function.
	(amd64_linux_init_abi): Call set_gdbarch_process_record_signal.

2009-09-21  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* i386-linux-tdep.c (i386_all_but_ip_registers_record): New
	function.
	(i386_linux_intx80_sysenter_record): Call
	i386_all_but_ip_registers_record if syscall is sys_sigreturn
	or sys_rt_sigreturn.
	(I386_LINUX_xstate, I386_LINUX_frame_size): New macros.
	(i386_linux_record_signal): New function.
	(i386_linux_init_abi): Call set_gdbarch_process_record_signal.

2009-09-21  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* record.c (record_end_entry): New struct.
	(record_type): Add end.
	(record_arch_list_add_end): Set rec->u.end.sigval to
	TARGET_SIGNAL_0.
	(record_message_args): New struct.
	(record_message): Call gdbarch_process_record_signal.
	(do_record_message): Add argument "signal".
	(record_resume): Ditto.
	(record_wait): Ditto.  Check record_list->u.end.sigval
	in replay mode.

2009-09-21  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* gdbarch.sh (process_record_signal): New interface.

2009-09-19  Matt Rice <[email protected]>  (tiny change)

	Checked in by Joel Brobecker  <[email protected]>
	* varobj.c (varobj_update): Initialize children_changed.

2009-09-19  Vladimir Prus  <[email protected]>

	* mi/mi-cmd-stack.c (list_args_or_locals): Workaround
	gcc warning.

2009-09-19  Vladimir Prus  <[email protected]>

	* mi/mi-cmds.h (mi_cmd_stack_list_variables): Declare.
	* mi/mi-cmds.c (mi_cmds): Register -stack-list-variables.
	* mi/mi-cmd-stack.c (enum what_to_list): New.
	(list_args_or_locals): Accept what_to_list parameter.
	Use 'variables' as output name of all are requested.
	(mi_cmd_stack_list_variables): New.
	(mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Adjust.

2009-09-19  Eli Zaretskii  <[email protected]>

	* config/djgpp/fnchange.lst: Add missing edits.

2009-09-18  Maxim Grigoriev  <[email protected]>

        * xtensa-tdep.c (call0_analyze_prologue): Replace INT_MAX by UNIT_MAX.

2009-09-18  Jan Kratochvil  <[email protected]>

	* objfiles.c (free_objfile): Clear SYMFILE_OBJFILE if it is OBJFILE.
	* rs6000-nat.c (vmap_ldinfo): Only assertion check SYMFILE_OBJFILE now.
	* symfile.c (syms_from_objfile, symbol_file_clear): Likewise.

2009-09-18  Ulrich Weigand  <[email protected]>

	* rs6000-tdep.c (rs6000_builtin_type_vec128): Add v2_double
	union member.

2009-09-17  Joel Brobecker  <[email protected]>

	Fix a build failure on pa-hpux:
	* gdb_ptrace.h (PT_SYSCALL): Define here if not already defined.
	* inf-ttrace.c (inf_ttrace_wait): Fix compilation failure
	introduced after field syscall_id inside struct target_waitstatus
	has been renamed into syscall_number.

2009-09-16  H.J. Lu  <[email protected]>

	PR gdb/10649
	* Makefile.in (GDB_DATADIR_PATH): Renamed to ...
	(GDB_DATADIR): This.
	(xml-syscall-install): Updated.

2009-09-16  Joel Brobecker  <[email protected]>

	GDB 7.0 branch created (branch timestamp: 2009-09-16 19:00 UTC)
	* version.in: Bump version to 7.0.50.20090916-cvs.

2009-09-15  Tom Tromey  <[email protected]>

	* varobj.h (varobj_update_result_t) <new>: New field.
	(varobj_get_child_range, varobj_set_child_range): Declare.
	(varobj_list_children): Update.
	(varobj_enable_pretty_printing, varobj_has_more)
	(varobj_pretty_printed_p): Declare.
	* varobj.c (pretty_printing): New global.
	(varobj_enable_pretty_printing): New function.
	(struct varobj_root) <from, to, constructor, child_iter,
	saved_item>: New fields.
	(varobj_create): Don't call install_default_visualizer.
	(instantiate_pretty_printer): Don't use value_copy.
	(varobj_has_more): New function.
	(restrict_range): New function.
	(install_dynamic_child): Likewise.
	(dynamic_varobj_has_child_method): Likewise.
	(update_dynamic_varobj_children): Remove 'new_and_unchanged'
	argument; add 'new', 'unchanged', 'from', and 'to' arguments.
	Rewrite.
	(varobj_get_num_children): Call update_dynamic_varobj_children.
	(varobj_list_children): Add 'from' and 'to' arguments.  Ignore
	result of update_dynamic_varobj_children.  Don't call
	install_default_visualizer.  Restrict result range.
	(varobj_add_child): Don't call install_default_visualizer.
	(varobj_pretty_printed_p): New function.
	(install_visualizer): Rewrite.  Move earlier in file.
	(install_default_visualizer): Likewise.
	(construct_visualizer): New function.
	(install_new_value_visualizer): Likewise.
	(install_new_value): Don't call release_value.  Special case
	pretty-printed objects.  Use value_incref.  Rearrange "changed"
	logic.
	(varobj_get_child_range): New function.
	(varobj_set_child_range): Likewise.
	(varobj_set_visualizer): Rewrite.
	(varobj_update): Rewrite pretty-printing logic.
	(new_variable): Initialize new fields.
	(free_variable): Destroy new fields.
	(value_of_root): Copy 'from' and 'to'.
	(my_value_of_variable): Handle pretty-printers.
	(value_get_print_value): Rework pretty-printing logic.
	(cplus_describe_child): Don't use release_value.
	* mi/mi-cmds.h (mi_cmd_enable_pretty_printing)
	(mi_cmd_var_set_update_range): Declare.
	* mi/mi-cmds.c (mi_cmds): Add enable-pretty-printing and
	var-set-update-range.
	* mi/mi-cmd-var.c (print_varobj): Update.  Emit "dynamic"
	attribute.
	(mi_cmd_var_create): Emit "has_more" attribute.
	(mi_cmd_var_set_format): Plug memory leak.
	(mi_print_value_p): Replace 'type' argument with 'var'.  Handle
	pretty-printed varobjs.
	(mi_cmd_var_list_children): Accept 'from' and 'to' arguments.
	Emit "has_more" attribute.
	(mi_cmd_var_evaluate_expression): Plug memory leak.
	(mi_cmd_var_assign): Likewise.
	(varobj_update_one): Likewise.  Emit "dynamic", "has_more", and
	"new_children" attributes.
	(mi_cmd_enable_pretty_printing): New function.
	(mi_cmd_var_set_update_range): Likewise.

2009-09-15  Doug Evans  <[email protected]>

	* dwarf2expr.h (dwarf_value_location): Add more comments describing
	enum values.
	(struct dwarf_stack_value): New struct.
	(struct dwarf_expr_context): Change type of `stack' from CORE_ADDR*
	to struct dwarf_stack_value*.
	(struct dwarf_expr_piece): Move `v.value' into its own struct, v.expr,
	all uses updated.  Add v.expr.in_stack_memory.
	(dwarf_expr_push): Update declaration.
	(dwarf_expr_fetch_in_stack_memory): Declare.
	* dwarf2expr.c (dwarf_expr_grow_stack): Update calculation of
	size of stack value.
	(dwarf_expr_push): New arg in_stack_memory, all callers updated.
	(dwarf_expr_fetch_in_stack_memory): New function.
	(add_piece): Set in_stack_memory for non-literal values.
	(execute_stack_op): Allow ops to specify whether the value is on the
	program's stack.
	(execute_stack_op, case DW_OP_fbreg): Mark value as in stack memory.
	(execute_stack_op, case DW_OP_call_frame_cfa): Ditto.
	(execute_stack_op, case DW_OP_dup): Copy in_stack_memory flag.
	(execute_stack_op, cases DW_OP_pick, DW_OP_over): Ditto.
	(execute_stack_op, cases DW_OP_swap, DW_OP_rot): Update type of
	dwarf stack value.
	* dwarf2loc.c (read_pieced_value): Call read_stack for values known
	to be on the program's stack.
	(dwarf2_evaluate_loc_desc, case DWARF_VALUE_MEMORY): Call
	set_value_stack only for objects known to be in stack memory.
	* dwarf2-frame.c (execute_stack_op): New arg initial_in_stack_memory,
	all callers updated.

	* target.c (memory_xfer_partial): Pass correct length to dcache_update.

2009-09-15  Jan Kratochvil  <[email protected]>

	Fix gcc-4.5 HEAD warnings for enum ada_operator.
	* Makefile.in (HFILES_NO_SRCDIR): Add ada-operator.inc.
	* ada-lang.h (enum ada_operator): Move it to ...
	* ada-operator.inc: ... a new file.
	* expression.h (enum exp_opcode): Include ada-operator.inc.
	New element OP_UNUSED_LAST.  Update comment for OP_EXTENDED0.

	Fix gcc-4.5 HEAD warnings for GDB_FORM_cached_string.
	* dwarf2read.c (GDB_FORM_cached_string)
	(dwarf_form_name <GDB_FORM_cached_string>): Remove.
	(struct attribute <dwarf_form>): Reduce the bit width.
	(struct attribute <string_is_canonical>, DW_STRING_IS_CANONICAL): New.
	(read_attribute_value <DW_FORM_string>)
	(read_attribute_value <DW_FORM_strp>): Initialize
	DW_STRING_IS_CANONICAL.
	(dwarf2_name, dump_die_shallow <DW_FORM_string>)
	(dump_die_shallow <DW_FORM_strp>): Update the code using former
	GDB_FORM_cached_string.

2009-09-14  Sergio Durigan Junior <[email protected]>

	* amd64-linux-tdep.c: Include xml-syscall.h header, define the XML
	syscall name for the architecture.
	(amd64_linux_get_syscall_number): New function.
	(amd64_linux_init_abi): Register the correct functions for syscall
	catchpoint; set the correct syscall file name.
	* breakpoint.c: New include: xml-syscall.h.
	(set_raw_breakpoint_without_location): Setting the parameters
	for the catch syscall feature.
	(insert_catch_syscall): New.
	(remove_catch_syscall): New.
	(breakpoint_hit_catch_syscall): New.
	(print_it_catch_syscall): New.
	(print_one_catch_syscall): New.
	(print_mention_catch_syscall): New.
	(catch_syscall_breakpoint_ops): New.
	(syscall_catchpoint_p): New.
	(create_catchpoint_without_mention): New.
	(create_catchpoint): Modified in order to use
	create_catchpoint_without_mention.
	(create_syscall_event_catchpoint): New.
	(clean_up_filters): New.
	(catch_syscall_split_args): New.
	(catch_syscall_command_1): New.
	(delete_breakpoint): Add cleanup for catch syscall.
	(is_syscall_catchpoint_enabled): New.
	(catch_syscall_enabled): New.
	(catching_syscall_number): New.
	(catch_syscall_completer): New completer function.
	(add_catch_command): Add the completer function for catchpoints.
	* breakpoint.h (syscalls_to_be_caught): New vector.
	(catch_syscall_enabled): New.
	(catching_syscall_number): New.
	* gdbarch.c: Regenerated.
	* gdbarch.h: Regenerated.
	* gdbarch.sh: Add syscall catchpoint functions and structures.
	(get_syscall_number): New.
	(UNKNOWN_SYSCALL): New definition.
	* i386-linux-nat.c (i386_linux_resume): Select the proper request
	to be made for ptrace() considering if we are catching syscalls
	or not.
	* i386-linux-tdep.c: Include xml-syscall.h header, define the XML
	syscall name for the architecture.
	(i386_linux_get_syscall_number): New.
	(i386_linux_init_abi): Register the correct functions for syscall
	catchpoint; set the correct syscall file name.
	* inf-child.c (inf_child_set_syscall_catchpoint): New.
	(inf_child_target): Assign default values to target_ops.
	* inf-ptrace.c (inf_ptrace_resume): Select the proper request
	to be made for ptrace() considering if we are catching syscalls
	or not.
	* inferior.h (struct inferior): Included new variables
	any_syscall_count, syscalls_counts and total_syscalls_count,
	used to keep track of requested syscall catchpoints.
	* infrun.c (resume): Add syscall catchpoint.
	(deal_with_syscall_event): New.
	(handle_inferior_event): Add syscall entry/return events.
	(inferior_has_called_syscall): New.
	* linux-nat.c: Define some helpful variables to track wether we have
	support for the needed ptrace option.
	(linux_test_for_tracesysgood): New.
	(linux_supports_tracesysgood): New.
	(linux_enable_tracesysgood): New.
	(linux_enable_event_reporting): Save the current used ptrace
	options.
	(linux_child_post_attach): Calling linux_enable_tracesysgood.
	(linux_child_post_startup_inferior): Likewise.
	(linux_child_set_syscall_catchpoint): New function.
	(linux_handle_extended_wait): Handle the case which the inferior stops
	because it has called or returned from a syscall.
	(linux_target_install_ops): Install the necessary functions to handle
	syscall catchpoints.
	* linux-nat.h (struct lwp_info): Include syscall_state into the
	structure, which indicates if we are in a syscall entry or return.
	* ppc-linux-tdep.c: Include xml-syscall.h header, define the XML
	syscall filename for the arch.
	(ppc_linux_get_syscall_number): New.
	(ppc_linux_init_abi): Register the correct functions for syscall
	catchpoint; setting the correct name for the XML syscall file.
	* target.c (update_current_target): Update/copy functions related to
	syscall catchpoint.
	(target_waitstatus_to_string): Add syscall catchpoint entry/return
	events.
	* target.h (struct target_waitstatus): Add syscall number.
	(struct syscall): New struct to hold information about syscalls
	in the system.
	(struct target_ops): Add ops for syscall catchpoint.
	(inferior_has_called_syscall): New.
	(target_set_syscall_catchpoint): New.
	* xml-support.c (xml_fetch_content_from_file): New function,
	transferred from xml-tdesc.c.
	* xml-support.h (xml_fetch_content_from_file): New.
	* xml-tdesc.c (fetch_xml_from_file): Function removed;
	transferred to xml-support.c.
	(file_read_description_xml): Updated to use the new
	xml_fetch_content_from_file function.
	* syscalls/gdb-syscalls.dtd: New definition file for syscall's XML
	support.
	* syscalls/amd64-linux.xml: New file containing information about
	syscalls for GNU/Linux systems that use amd64 architecture.
	* syscalls/i386-linux.xml: New file containing information about
	syscalls for GNU/Linux systems that use i386 architecture.
	* syscalls/ppc-linux.xml: New file containing information about
	syscalls for GNU/Linux systems that use PPC architecture.
	* syscalls/ppc64-linux.xml: New file containing information about
	syscalls for GNU/Linux systems that use PPC64 architecture.
	* xml-syscall.c: New file containing functions for manipulating
	syscall's XML files.
	* xml-syscall.h: New file, exporting the functions above mentioned.
	* Makefile.in: Support for relocatable GDB datadir and XML
	syscall.
	* NEWS: Added information about the catch syscall feature.

2009-09-14  Doug Evans  <[email protected]>

	* target.c (memory_xfer_partial): Only update dcache after we know
	the write succeeded.

2009-09-14  Paul Pluzhnikov  <[email protected]>

	*minsyms.c (lookup_minimal_symbol_by_pc_section_1): Assert non-NULL
	section.
	(lookup_minimal_symbol_by_pc_section): Check for NULL section.
	(lookup_minimal_symbol_by_pc): Adjust.

2009-09-14  Paul Pluzhnikov  <[email protected]>

	* objfiles.c (qsort_cmp): Remove asserts.
	(insert_section_p, filter_debuginfo_sections): New function.
	(filter_overlapping_sections): Likewise.
	(update_section_map): Adjust.	

2009-09-13  Daniel Jacobowitz  <[email protected]>

	* frame.c (get_frame_id): Default to outer_frame_id if the this_id
	method does not supply an ID.  Assert that the result is not
	null_frame_id.
	(outer_frame_id): New.
	(frame_id_p): Accept outer_frame_id.
	(frame_id_eq): Allow outer_frame_id to be equal to itself.
	(frame_find_by_id): Revert previous local workarounds.
	(get_prev_frame_1): Adjust end-of-stack check to test outer_frame_id.
	* frame.h (null_frame_id, frame_id_p): Update comments.
	(outer_frame_id): Declare.
	* infrun.c (handle_inferior_event): Do not treat all steps from the
	outermost frame as subroutine calls.

	* libunwind-frame.c (libunwind_frame_this_id): Do not clear THIS_ID.
	* hppa-tdep.c (hppa_stub_frame_this_id): Likewise.
	* ia64-tdep.c (ia64_frame_this_id): Likewise.
	(ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id):
	Use outer_frame_id instead of null_frame_id.
	* amd64obsd-tdep.c (amd64obsd_trapframe_cache): Use outer_frame_id.
	* i386obsd-tdep.c (i386obsd_trapframe_cache): Likewise.
	* inline-frame.c (inline_frame_this_id): Refuse outer_frame_id.
	* thread.c (restore_selected_frame): Update comment and remove
	frame_id_p check.

2009-09-11  Doug Evans  <[email protected]>

	* dwarf2expr.c (execute_stack_op, case DW_OP_piece): Delete unused
	local addr_or_regnum.

	* objfiles.c (struct objfile_data): Delete member cleanup and replace
	with save, free.
	(register_objfile_data_with_cleanup): Delete arg cleanup and replace
	with save, free.  All callers updated.
	(clear_objfile_data): Replace cleanup loop with separate save and
	free loops.
	* objfiles.h (register_objfile_data_with_cleanup): Update.
	* arm-tdep.c (arm_objfile_data_free): Renamed from
	arm_objfile_data_cleanup, all callers updated.
	* dwarf2read.c (dwarf2_per_objfile_free): Renamed from
	dwarf2_per_objfile_cleanup, all callers updated.
	* python/py-objfile.c (py_free_objfile): Renamed from clean_up_objfile,
	all callers updated.
	* python/py-type.c (save_objfile_types): Renamed from
	clean_up_objfile_types, all callers updated.

2009-09-11  Tom Tromey  <[email protected]>

	* dwarf2loc.c (struct piece_closure) <arch>: New field.
	(dwarf2_evaluate_loc_desc): Update.
	(dwarf2_loc_desc_needs_frame): Likewise.
	(allocate_piece_closure): Initialize new field.
	(read_pieced_value): Update.
	(write_pieced_value): Update.
	(copy_pieced_value_closure): Update.
	* dwarf2expr.h (enum dwarf_value_location): New.
	(struct dwarf_expr_context) <in_reg>: Remove.
	<location, len, data>: New fields.
	(struct dwarf_expr_piece) <in_reg, value>: Remove.
	<location, v>: New fields.
	* dwarf2expr.c (add_piece): Remove in_reg, value arguments.
	Update.
	(require_composition): New function.
	(execute_stack_op): Update.
	<DW_OP_implicit_value, DW_OP_stack_value>: New cases.
	<DW_OP_reg0>: Set location, not in_reg.
	<DW_OP_regx>: Likewise.  Use require_composition.
	<DW_OP_fbreg>: Update.
	<DW_OP_piece>: Likewise.
	* dwarf2-frame.c (execute_stack_op): Update.

2009-09-10  Anthony Green  <[email protected]>

	* moxie-tdep.c (moxie_analyze_prologue): Recognize new prologue
	sequences.

2009-09-10  Michael Snyder  <[email protected]>

	* remote.c (PACKET_bc, PACKET_bs): New enums.
	(remote_protocol_features): Add ReverseStep, ReverseContinue.
	(remote_resume): Check for reverse capability.
	(_initialize_remote): Add packet config for "bs" and "bc" packets.
	* NEWS (new options): Mention set/show for "bs" and "bc" packets.

2009-09-10  Joel Brobecker  <[email protected]>

	* top.c (interactive_mode): New static variable.
	(show_interactive_mode): New function.
	(input_from_terminal_p): If interactive_mode is not auto, then
	use that rather than checking the stdin settings.
	(init_main): Add "set/show interactive-mode" command.
	* NEWS: Add entry for new "set/show interactive-mode" command.

2009-09-10  Joel Brobecker  <[email protected]>

	* configure.ac: Fix the names of the python source and object files
	following the renaming done in an earlier change.
	* configure: Regenerate.

2009-09-08  Joel Brobecker  <[email protected]>

	Fix a build failure on AIX.
	* rs6000-nat.c (vmap_exec): Rewrite using target_get_section_table
	instead of relying on the to_sections/to_section_end target_ops
	field, since the latter have been removed in a previous patch.

2009-09-08  Thiago Jung Bauermann  <[email protected]>

	* Makefile.in (py-cmd.o): Renamed from python-cmd.o.  Updated
	references.
	(py-frame.o): Renamed from python-frame.o.  Updated references.
	(py-function.o): Renamed from python-function.o.  Updated references.
	(py-objfile.o): Renamed from python-objfile.o.  Updated references.
	(py-prettyprint.o): Renamed from python-prettyprint.o.  Updated
	references.
	(py-type.o): Renamed from python-type.o.  Updated references.
	(py-utils.o): Renamed from python-utils.o.  Updated references.
	(py-value.o): Renamed from python-value.o.  Updated references.
	* py-cmd.c: Renamed from python-cmd.c.
	* py-frame.c: Renamed from python-frame.c.
	* py-function.c: Renamed from python-function.c.
	* py-objfile.c: Renamed from python-objfile.c.
	* py-prettyprint.c: Renamed from python-prettyprint.c.
	* py-type.c: Renamed from python-type.c.
	* py-utils.c: Renamed from python-utils.c.
	* py-value.c: Renamed from python-value.c.

2009-09-08  Joel Brobecker  <[email protected]>

	Avoid quadratic behavior when computing the value of a register.
	* frame.c (frame_stash): New static constant.
	(frame_stash_add, frame_stash_find, frame_stash_invalidate):
	New functions.
	(get_frame_id): Minor reformatting. Add the frame to the frame stash.
	(frame_find_by_id): Search the frame stash first before walking all
	frames starting from te current_frame.
	(reinit_frame_stash): Add call to frame_stash_invalidate ();

2009-09-08  Joel Brobecker  <[email protected]>

	* block.c (contained_in): Return zero for nested functions.
	* blockframe.c (block_innermost_frame): Delete unreferenced local
	variable.

2009-09-08  Doug Evans  <[email protected]>

	* target.c (initialize_targets): Fix thinko in stack_cache_enabled_p.

2009-09-08  Michael Snyder  <[email protected]>

	* amd64-linux-tdep.h (enum amd64_syscall): New enum consts, 
	to replace literal consts used in amd64-linux-tdep.c
	* linux-record.h (enum gdb_syscall): New enum consts, to replace
	literal consts used in amd64-linux-tdep.c and linux-record.c.
	* amd64-linux-tdep.c (amd64_canonicalize_syscall): New function,
	translate from native amd64 Linux syscall id to internal gdb id.
	(amd64_linux_syscall_record): Switch statement abstracted out 
	and replaced with a call to amd64_canonicalize_syscall.
	* linux-record.c (record_linux_system_call): Replace literal
	consts with enum consts.
	* i386-linux-tdep.c (i386_canonicalize_syscall): New function,
	trivially translate from native i386 Linux syscalls to gdb syscalls.
	(i386_linux_intx80_sysenter_record): 

2009-09-08  Ralf Wildenhues  <[email protected]>

	* gdb/Makefile.in (check//%): Parse 'config.status --version'
	output to recreate the configuration from the testsuite directory,
	rather than running 'config.status --recheck' from a different
	build directory.  Let configure do the recursion rather than
	doing it manually.

2009-09-08  Jan Kratochvil  <[email protected]>

	* ia64-tdep.c (ia64_memory_remove_breakpoint): Call do_cleanups
	before a return.

2009-09-08  Jan Kratochvil  <[email protected]>

	* ia64-tdep.c (ia64_memory_insert_breakpoint)
	(ia64_memory_remove_breakpoint): Return immediately if any of memory
	reads fail.  Do not combine the VAL values.

2009-09-08  Jan Kratochvil  <[email protected]>

	Fix ia64 shadowing of breakpoints in multiple slots of a single bundle.
	* ia64-tdep.c (ia64_memory_insert_breakpoint): New call
	of make_show_memory_breakpoints_cleanup with parameter 0.  Move the
	reading of SHADOW_CONTENTS to this memory state point of code.  Update
	comment for the memory re-read.

2009-09-07  Michael Snyder  <[email protected]>

	* record.c: Minor comment and white space fix-ups.

2009-09-07  Jan Kratochvil  <[email protected]>

	* m68k-tdep.c (m68k_gdbarch_init): Allocate TDEP as cleared.
	* sparc-tdep.c (sparc32_gdbarch_init): Allocate TDEP as cleared.
	Remove explicit clearing of TDEP fields.

2009-09-06  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_record_check_override): Deleted.
	(i386_record_lea_modrm): Ditto.
	(i386_process_record): Ditto.

2009-09-05  Eli Zaretskii  <[email protected]>

	* config/djgpp/djconfig.sh: Fix for Autoconf 2.64.
	* config/djgpp/config.sed: Fix for Autoconf 2.64.

2009-09-05  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_record_s): Add orig_addr.
	(i386_record_check_override): New function.
	(i386_record_lea_modrm): Call i386_record_check_override.
	(i386_process_record): Ditto.

2009-09-03  Nathan Froyd  <[email protected]>

	* dwarf2loc.c (struct piece_closure): New.
	(allocate_piece_closure): New function.
	(read_pieced_value): New function.
	(write_pieced_value): New function.
	(copy_pieced_value_closure): New function.
	(free_pieced_value_closure): New function.
	(pieced_value_funcs): Define.
	(dwarf2_evaluate_loc_desc): Return a computed value for a variable
	described with pieces.

2009-09-03  Pierre Muller <[email protected]>
	    Richard Earnshaw <[email protected]>

	* arm-tdep.c (displaced_write_reg): Replace call to abort by call
	to internal_error.

2009-09-02  Tom Tromey  <[email protected]>

	* frame.h (frame_unwinder_is): Declare.
	* frame.c (frame_unwinder_is): New function.
	* dwarf2loc.c: Include dwarf2-frame.h.
	(dwarf_expr_frame_cfa): New function.
	(dwarf2_evaluate_loc_desc): Use it.
	(needs_frame_frame_cfa): New function.
	(dwarf2_loc_desc_needs_frame): Use it.
	* dwarf2expr.h (struct dwarf_expr_context) <get_frame_cfa>: New
	field.
	* dwarf2expr.c (execute_stack_op) <DW_OP_call_frame_cfa>: New
	case.
	* dwarf2-frame.h (dwarf2_frame_cfa): Declare.
	* dwarf2-frame.c (no_get_frame_cfa): New function.
	(execute_stack_op): Use it.
	(dwarf2_frame_cfa): New function.

2009-09-02  Hui Zhu  <[email protected]>

	* record.c (record_resume): Change "signal" to "siggnal".

2009-09-01  Hui Zhu  <[email protected]>

	* record.c (record_resume): Change "siggnal" to "signal".

2009-09-01  Hui Zhu  <[email protected]>

	* record.c (record_resume_siggnal): Deleted.
	(record_resume): Ditto.
	(record_wait): Change record_resume_siggnal to
	TARGET_SIGNAL_0.

2009-08-31  Jacob Potter  <[email protected]>
	    Doug Evans  <[email protected]>

	Implement TARGET_OBJECT_STACK_MEMORY.
	* NEWS: Add note on new "set stack-cache" option.
	* corefile.c (read_stack): New function.
	* dcache.c (dcache_struct): New member ptid.
	(dcache_enable_p): Mark as obsolete.
	(show_dcache_enabled_p): Flag option as deprecated.
	(dcache_invalidate): Update ptid.
	(dcache_invalidate_line): New function.
	(dcache_read_line): No longer check cacheable attribute, stack
	accesses get cached despite attribute.
	(dcache_init): Set ptid.
	(dcache_xfer_memory): Flush cache if from different ptid than before.
	Update cache after write.
	(dcache_update): New function.
	(dcache_info): Report ptid.
	(_initialize_dcache): Update text for `remotecache' to indicate it
	is obsolete.
	* dcache.h (dcache_update): Declare.
	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with
	set_value_stack.
	* frame-unwind.c (frame_unwind_got_memory): Ditto.
	* gdbcore.h (read_stack): Declare.
	* memattr.c (mem_enable_command): Call target_dcache_invalidate
	instead of dcache_invalidate.
	(mem_disable_command, mem_delete_command): Ditto.
	* target.c (stack_cache_enabled_p_1): New static global.
	(stack_cache_enabled_p): New static global.
	(set_stack_cache_enabled_p): New function.
	(show_stack_cache_enabled_p): New function.
	(target_dcache): Make static.
	(target_dcache_invalidate): New function.
	(target_load, target_resume): Call target_dcache_invalidate
	instead of dcache_invalidate.
	(memory_xfer_partial): New arg object, all callers updated.
	Check for existing inferior before calling dcache routines.
	When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache.
	(target_xfer_partial): Call memory_xfer_partial for
	TARGET_OBJECT_STACK_MEMORY.
	(target_read_stack): New function.
	(initialize_targets): Install new option `stack-cache'.
	* target.h: Remove #include of dcache.h.
	(enum target_object): New value TARGET_OBJECT_STACK_MEMORY.
	(target_dcache): Delete.
	(target_dcache_invalidate): Declare.
	(target_read_stack): Declare.
	* top.c (prepare_execute_command): New function.
	(execute_command): Call prepare_execute_command
	instead of free_all_values.
	* top.h (prepare_execute_command): Declare.
	* valops.c (get_value_at): New function.
	(value_at): Guts moved to get_value_at.
	(value_at_lazy): Similarly.
	(value_fetch_lazy): Call read_stack for stack values.
	* value.c (struct value): New member `stack'.
	(value_stack, set_value_stack): New functions.
	* value.h (value_stack, set_value_stack): Declare.
	* mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command
	instead of free_all_values.

2009-08-29  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Fix the error of string
	ops instructions's handler.

2009-08-28  Doug Evans  <[email protected]>

	* top.c (execute_command): Remove redundant comment.

2009-08-28  Daniel Jacobowitz  <[email protected]>

	PR gdb/10565

	* value.c (value_primitive_field): Do not save value_offset for
	bitfields.
	(unpack_bits_as_long): Do not read an entire ULONGEST.

2009-08-28  Jan Kratochvil  <[email protected]>

	Support constant DW_AT_data_member_location by GCC PR debug/40659.
	* dwarf2read.c
	(dwarf2_add_field <DW_TAG_member> <DW_AT_data_member_location>):
	Initialize BYTE_OFFSET to 0 by default.  Explicitly check if
	attr_form_is_block.
	(dwarf2_add_field <DW_TAG_inheritance> <DW_AT_data_member_location>)
	(read_common_block <DW_AT_data_member_location>): New variable
	byte_offset.  Fix crash on non-DW_BLOCK ATTR values.

2009-08-28  Hui Zhu  <[email protected]>

	* record.c (record_list_release_next): Change the first
	record_reg to record_end.

2009-08-27  Doug Evans  <[email protected]>

	* value.c (free_all_values): Tweak comment.

	* NEWS: Add note on "info sharedlibrary".
	Remove note on "set print symbol-loading".
	* main.c (captured_main): Pass !batch for from_tty when calling
	symbol_file_add_main.
	* objfiles.h (objfile_has_partial_symbols): Declare.
	(objfile_has_full_symbols): Declare.
	* objfiles.c (objfile_has_partial_symbols): New function.
	(have_partial_symbols): Use it.
	(objfile_has_full_symbols): New function.
	(have_full_symbols): Use it.
	* solib.c: Include interps.h.
	(solib_read_symbols): Back out patch of 2008-07-10.
	Add test for info_verbose for symbol loading messages for
	consistency with symfile.c.
	(info_sharedlibrary_command): Handle optional parameter of regex of
	libraries to list.  Inform user of libraries without debugging info.
	Rewrite to use ui_out routines to format output.
	* symfile.c (print_symbol_loading): Delete.
	(symbol_file_add_with_addrs_or_offsets): Back out patch of 2008-07-10.
	Print "no debugging symbols found" only if from_tty || info_verbose;
	and only check file being loaded, not all files.
	(reread_symbols): Test file being loaded for whether it has symbols,
	not all files.
	(__initialize_symfile): Delete `set print symbol-loading'.
	* symfile.h (print_symbol_loading): Delete.

2009-08-27  Jan Kratochvil  <[email protected]>

	* varobj.c (varobj_create): Error if the specified frame was not found
	and it is needed.

2009-08-26  Michael Snyder  <[email protected]>

	* i386-tdep.c (i386_process_record): Break out of prefix loop
	if not amd64.  Otherwise inc/dec instructions are lost.

2009-08-25  Keith Seitz  <[email protected]>

	* c-exp.y (yylex): Add cxx_only check for tokentab2 and tokentab3
	searches. 
	(tokentab3): Add cxx_only for DOT_STAR.

2009-08-25  Pedro Alves  <[email protected]>

	* inferior.c (print_inferior): Align columns left.  Remove header
	for the the "current" column.  Rename column "Id" to "Num".
	Rename column "PID" to "Description".  Print if there's no selected
	inferior.

2009-08-25  Jan Kratochvil  <[email protected]>

	Fix ia64 start crash when GDB built with -lmcheck.
	* ia64-tdep.c (ia64_gdbarch_init): Allocate TDEP as cleared.  Remove
	specific clearing of TDEP SIGCONTEXT_REGISTER_ADDRESS and
	PC_IN_SIGTRAMP.

2009-08-24  Keith Seitz  <[email protected]>

	* c-exp.y (tokentab3): Add new token, ARROW_STAR. Changed all users.
	(tokentab2): Add new token, DOT_STAR. Changed all users.

2009-08-24  Keith Seitz  <[email protected]>

	* symtab.c (default_make_symbol_completion_list): Keep
	':', too, so that we can limit searches in namespaces
	and classes. 

2009-08-24  Tom Tromey  <[email protected]>

	* python/python-value.c (valpy_richcompare): Don't return from
	inside a TRY_CATCH.

2009-08-22  Ralf Wildenhues  <[email protected]>

	* CONTRIBUTE: Bump documented Autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

	* aclocal.m4: Regenerate.
	* config.in: Likewise.
	* configure: Likewise.
	* gnulib/Makefile.in: Likewise.

	* configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of
	AC_GNU_SOURCE, AC_AIX, AC_ISC_POSIX.

2009-08-21  Paul Pluzhnikov  <[email protected]>

	* objfiles.h (gdb_bfd_ref): New prototype.
	* objfiles.c (gdb_bfd_ref): New function.
	(allocate_objfile): Call it.
	(gdb_bfd_unref): Adjust assertion.
	* solib.c (solib_map_sections): Add reference.
	(symbol_add_stub): Don't add reference here.
	* symfile.c (reread_symbols): Add reference.

2009-08-21  Ken Werner <[email protected]>
	    Doug Evans  <[email protected]>

	* jit.c (jit_event_handler): Use paddress to print target addresses.
	Wrap printf string in _().

2009-08-21  Doug Evans  <[email protected]>

	* jit.c (jit_read_descriptor): New arg gdbarch, all callers updated.
	(jit_read_code_entry, jit_register_code): Ditto.
	(jit_event_handler): Ditto.
	(jit_inferior_init): Renamed from previous jit_inferior_created_hook.
	(jit_inferior_created_hook, jit_breakpoint_re_set): New functions.
	(jit_inferior_created_observer): Renamed from
	jit_inferior_created_hook1, all callers updated.
	* jit.h (jit_breakpoint_re_set): Declare.
	(jit_event_handler): Update prototype.
	* breakpoint.c (breakpoint_re_set): Call jit_breakpoint_re_set instead
	of jit_inferior_created_hook.

2009-08-21  Hui Zhu  <[email protected]>

	* record.c (record_wait): Change the argument of
	record_beneath_to_wait to options.

2009-08-20  Jacob Potter  <[email protected]>

	Replace dcache with splay tree.
	Remove partially implemented writeback support.
	* dcache.c: Include splay-tree.h.
	(LINE_SIZE_POWER): Change from 5 to 6.
	(DCACHE_SIZE): Change from 64 to 4096.
	(ENTRY_INVALID, ENTRY_VALID, ENTRY_DIRTY): Delete.
	(state_chars): Delete.
	(struct dcache_block): Clean up; remove state and anydirty fields.
	(struct dcache_struct): Redefine as a splay tree and linked list.
	(last_cache): Make static.
	(dcache_invalidate, dcache_hit): Rewrite for new cache structure.
	(dcache_read_line, dcache_alloc): Rewrite for new cache structure.
	(dcache_write_line): Delete.
	(dcache_writeback): Delete.
	(dcache_peek_byte): Clean up; remove "invalid" state check.
	(dcache_poke_byte): Rewrite for new cache structure; clarify comment.
	(dcache_splay_tree_compare): New function.
	(dcache_init, dcache_free): Rewrite for new cache structure.
	(dcache_xfer_memory): Rewrite for new write-through cache structure.
	(dcache_print_line): New function.
	(dcache_info): Rewrite for new cache structure.
	(_initialize_dcache): Update "info dcache" help text.
	* dcache.h (dcache_xfer_memory): Update declaration.
	* target.c (memory_xfer_partial): Update calls to dcache_xfer_memory.

2009-08-19  Reid Kleckner  <[email protected]>

	Add interface for JIT code generation.
	* NEWS: Announce JIT interface.
	* Makefile.in (SFILES): Add jit.c.
	(HFILES_NO_SRCDIR): Add jit.h.
	(COMMON_OBS): Add jit.o.
	* jit.c: New file.
	* jit.h: New file.
	* breakpoint.h (enum bptype): Add bp_jit_event to enum.
	* breakpoint.c:
	(update_breakpoints_after_exec): Delete jit breakpoints after exec.
	(bpstat_what): Update event table for bp_jit_event.
	(print_it_typical): Added case for bp_jit_event.
	(print_one_breakpoint_location): Added case for bp_jit_event.
	(allocate_bp_location): Added case for bp_jit_event.
	(mention): Added case for bp_jit_event.
	(delete_command): Added case for bp_jit_event.
	(breakpoint_re_set_one): Added case for bp_jit_event.
	(breakpoint_re_set): Added call to jit_inferior_created_hook.
	(create_jit_event_breakpoint): New.
	* infrun.c (handle_inferior_event): Add handler for jit event.
	(follow_exec): Add call to jit_inferior_created_hook.

2009-08-19  Ulrich Weigand  <[email protected]>

	* value.c (enum internalvar_kind): Replace INTERNALVAR_SCALAR by
	INTERNALVAR_INTEGER and INTERNALVAR_POINTER.
	(union internalvar_data): Replace "scalar" member by "integer"
	and "pointer".
	(value_of_internalvar): Handle INTERNALVAR_INTEGER and
	INTERNALVAR_POINTER instead of INTERNALVAR_SCALAR.
	(get_internalvar_integer): Likewise.
	(set_internalvar): Likewise.
	(set_internalvar_integer): Likewise.
	(preserve_one_internalvar): Likewise.
	(value_from_pointer): Handle typedef'd pointer types.

2009-08-18  Tom Tromey  <[email protected]>

	* utils.c (add_internal_problem_command): Free set_doc and
	show_doc.
	* remote.c (add_packet_config_cmd): Free set_doc and show_doc.
	* language.c (add_language): Free language_set_doc.

2009-08-18  Tom Tromey  <[email protected]>

	* Makefile.in (ALL_TARGET_OBS): Remove prologue-value.o, solib.o.

2009-08-17  Ulrich Weigand  <[email protected]>

	* symfile.c (reread_symbols): Call objfiles_changed *before*
	calling clear_symtab_users.

2009-08-17  Michael Snyder  <[email protected]>

	* amd64-tdep.c: Add a frame unwinder for function epilogues.
	(amd64_in_function_epilogue_p): New function.
	(amd64_epilogue_frame_sniffer): New function.
	(amd64_epilogue_frame_cache): New function.
	(amd64_epilogue_frame_this_id): New function.
	(amd64_epilogue_frame_unwind): New struct frame_unwind.
	(amd64_init_abi): Hook the new unwinder.

	* amd64-linux-tdep.c (amd64_linux_init_abi): Set gdbarch to use
	SVR4 method for skip_trampoline_code.

2009-08-17  Pedro Alves  <[email protected]>>

	* objfiles.c (objfile_relocate): Relocate the entry point before
	relocating the section offsets.  Flush the section map before
	resetting breakpoints.

2009-08-14  Doug Evans  <[email protected]>

	* symfile.c (find_separate_debug_file): Remove double free of
	canon_name.

2009-08-14  Pedro Alves  <[email protected]>

	* top.c (any_thread_of): Delete.
	(kill_or_detach): Use any_thread_of_process.
	* top.c (print_inferior_quit_action): New.
	(quit_confirm): Rewrite to print info about all inferiors.
	* target.c (dispose_inferior): New.
	(target_preopen): Use it.

2009-08-14  Pedro Alves  <[email protected]>

	* ui-file.h (ui_file_xstrdup): Mention that the length argument
	may be NULL.
	* ui-file.c (ui_file_xstrdup): Don't dereference LENGTH if it is
	NULL.
	* aix-thread.c (aix_thread_extra_thread_info): Pass NULL as length
	parameter to ui_file_xstrdup.
	* arm-tdep.c (_initialize_arm_tdep): Ditto.
	* infrun.c (print_target_wait_results): Ditto.
	* language.c (add_language): Ditto.
	* linespec.c (cplusplus_error): Ditto.
	* remote.c (escape_buffer): Ditto.
	* typeprint.c (type_to_string): Ditto.
	* utils.c (error_stream): Ditto.
	* varobj.c (value_get_print_value): Ditto.
	* xtensa-tdep.c (xtensa_verify_config): Replace `dummy' local with
	`length' local.  Pass it to ui_file_xstrdup, and avoid an strlen
	call.
	* gdbarch.sh (verify_gdbarch): Ditto.
	* gdbarch.c: Regenerate.
	* cli/cli-setshow.c (do_setshow_command): Pass NULL as length
	parameter to ui_file_xstrdup.
	* python/python-frame.c (frapy_str): Ditto.
	* python/python-type.c (typy_str): Use the length local instead of
	calling strlen.
	* python/python-value.c (valpy_str): Pass NULL as length parameter
	to ui_file_xstrdup.

2009-08-13  Doug Evans  <[email protected]>

	* utils.c (gnu_debuglink_crc32): Store crc32_table as unsigned int
	instead of unsigned long.

2009-08-13  Tom Tromey  <[email protected]>

	* varobj.c (update_dynamic_varobj_children): Don't use
	value_copy.
	* value.h: (preserve_one_value): Declare.
	(value_prepend_to_list, value_remove_from_list): Remove.
	* value.c (preserve_one_value): No longer static.
	(preserve_values): Call preserve_python_values.
	(value_prepend_to_list): Remove.
	(value_remove_from_list): Remove.
	* python/python.h (values_in_python): Don't declare.
	(preserve_python_values): Declare.
	* python/python-value.c (values_in_python): Change type.  Move
	lower.  Now static.
	(struct value_object): Add struct tag.
	<next, prev>: New fields.
	(valpy_dealloc): Update.
	(note_value): New function.
	(valpy_new): Use value_incref, note_value.
	(preserve_python_values): New function.
	(valpy_positive): Don't use value_copy.
	(value_to_value_object): Use value_incref, note_value.
	(convert_value_from_python): Update comment.

2009-08-13  Pedro Alves  <[email protected]>

	* remote.c (remote_pid_to_str): If printing a process id and we
	don't know what the remote pid could be, output "Remote target";
	otherwise, use normal_pid_to_str.

2009-08-13  Tom Tromey  <[email protected]>

	* language.h (longest_raw_hex_string): Remove unused declaration.

2009-08-13  Pedro Alves  <[email protected]>

	PR gdb/8869:

	* language.c (language, type, range, case_sensitive): Make const.
	(show_language_command): Don't call deprecated_show_value_hack.
	Special case "auto".
	(set_language_command): An unrecognized language is now an
	internal error instead of a user error.  Don't call set_lang_str.
	(show_type_command): Don't call deprecated_show_value_hack.
	Special case "auto".  Use warning.
	(set_type_command): An unrecognized type is now an internal error
	instead of a user error.  Output type check mismatch with language
	here.  Don't call set_type_str.
	(show_range_command): Don't call deprecated_show_value_hack.
	Special case "auto".  Use warning.
	(set_range_command): An unrecognized range check is now an
	internal error instead of a warning.  Output range check mismatch
	with language here.  Don't call set_range_str.
	(show_case_command): Don't call deprecated_show_value_hack.
	Special case "auto".  Use warning.
	(set_case_command): Don't call set_case_str.  An unrecognized case
	check is now an internal error instead of a warning.  Output range
	check mismatch with language here.  Don't call set_case_str.
	(set_type_range_case): Don't call set_type_str, set_range_str or
	set_case_str here.
	(set_lang_str, set_type_str, set_range_str, set_case_str): Delete.
	(add_language): Install or reinstall the "set language" command
	here, and make it an enum command.  Build the enumeration and the
	help string from the current list of known languages.
	(_initialize_language): Don't install "set language" here.  Make
	"set check type", "set check range" and "set case-sensitive" enum
	commands.  Register the "auto" "local" and "unknown" languages in
	that order.

2009-08-13  Pedro Alves  <[email protected]>

	Revert 2009-08-07 changes for PR gdb/8869:

	* language.c (set_language_command): Strip whitespace.
	(set_type_command): Likewise.
	(set_range_command): Likewise.

	* language.c (language_completer): New function.
	(range_or_type_completer): New function.
	(case_completer): New function.
	(_initialize_language): Set completers.
	* cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
	command.
	(add_setshow_string_noescape_cmd): Likewise.
	(add_setshow_integer_cmd): Likewise.
	(add_setshow_uinteger_cmd): Likewise.
	(add_setshow_zinteger_cmd): Likewise.
	(add_setshow_zuinteger_cmd): Likewise.
	* command.h (add_setshow_string_cmd,
	add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
	add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.

2009-08-12  Michael Snyder  <[email protected]>

	* remote.c (remote_add_inferior): Remove unused local.
	(remote_add_thread): Ditto.
	(read_ptid): Ditto.
	(remote_current_thread): Ditto.
	(remote_stop_ns): Ditto.
	(remote_parse_stop_reply): Ditto.
	(remote_get_pending_stop_replies): Ditto.
	(remote_wait_ns): Ditto.
	(remote_wait_as): Ditto.
	(send_g_packet): Ditto.
	(remote_fetch_registers): Ditto.
	(store_register_using_P): Ditto.
	(remote_store_registers): Ditto.
	(remote_remove_breakpoint): Ditto.
	(remote_write_qxfer): Ditto.
	(remote_read_qxfer): Ditto.

2009-08-11  Tom Tromey  <[email protected]>

	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Make a cleanup.
	(dwarf2_loc_desc_needs_frame): Likewise.
	* dwarf2expr.h (make_cleanup_free_dwarf_expr_context): Declare.
	* dwarf2expr.c (free_dwarf_expr_context_cleanup): New function.
	(make_cleanup_free_dwarf_expr_context): Likewise.
	* dwarf2-frame.c (execute_stack_op): Make a cleanup.

2009-08-10  Jan Kratochvil  <[email protected]>

	* objfiles.c (gdb_bfd_unref): Use the bfd_usrdata accessor.
	* solib.c (symbol_add_stub): Likewise.
	* symfile.c (symfile_bfd_open): Assert BFD_USRDATA is NULL.

2009-08-10  Paul Pluzhnikov  <[email protected]>

	* objfiles.c (qsort_cmp): Remove assert.
	(preferred_obj_section): New function.
	(update_section_map): Filter duplicates.
	
2009-08-10  Tristan Gingold  <[email protected]>

	* solib-darwin.c (find_program_interpreter): Simplify the code by
	looking up for the load_dylinker command instead of reading the
	corresponding (but deprecated) section.
	(darwin_solib_create_inferior_hook): Adjust: do not free the
	interpreter path.

2009-08-10  Tristan Gingold  <[email protected]>

	* i386-darwin-tdep.c (i386_m128_p): New function.
	(i386_darwin_arg_type_alignment): Ditto.
	(i386_darwin_push_dummy_call): Ditto.
	(i386_darwin_init_abi): Define Darwin specific push_dummy_call.
	Adjust long_double size.  Adjust pc offset in setjump buffer.

2009-08-10  Hui Zhu  <[email protected]>

	Add Linux AMD64 process record support.

	* amd64-linux-tdep.c (amd64_linux_record_tdep): New variable.
	This struct has the argument for the function
	"record_linux_system_call".
	(amd64_linux_syscall_record): New function. Parse the
	system call instruction and call function
	"record_linux_system_call" to record execute log.
	(i386_linux_init_abi): Initialize "amd64_linux_record_tdep".
	Set "amd64_linux_syscall_record" to "i386_syscall_record".

2009-08-10  Hui Zhu  <[email protected]>

	Add process record Linux system call 64 bits support.

        * linux-record.h (linux_record_tdep): Add size_pointer,
        size_size_t, size_iovec and arg6.  Change the values of
	size_int, size_long and size_ulong to
	gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT,
	gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT,
	gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT.
	* i386-linux-tdep.c (i386_linux_init_abi): Ditto.
	(i386_linux_intx80_sysenter_record): Add a check for system
	call number.
        * linux-record.c (record_linux_system_call): Make this
        function support 64 bits.

2009-08-10  Hui Zhu  <[email protected]>

	Add AMD64 process record instruction set support.

	* i386-tdep.h (gdbarch_tdep): Add record_regmap for registers
	because the AMD64's registers order in GDB is not same with
	I386 instructions.
	Add i386_syscall_record to be the syscall function handle
	interface.
	(record_i386_regnum): Number for record_regmap.
	* i386-tdep.c (OT_QUAD): For 64 bits.
	(i386_record_s): Add rex_x, rex_b, rip_offset and
	popl_esp_hack for AMD64 instruction set. And regmap for
	record_regmap.
	(i386_record_lea_modrm_addr): Support AMD64 instruction set
	64 bits lea.
	(i386_record_lea_modrm): Ditto.
	(i386_record_push): New function.  Record the execution log
	of push.
	(I386_RECORD_ARCH_LIST_ADD_REG): New macro to record the
	register.
	(i386_process_record): Support AMD64 instruction set.
	* amd64-tdep.c (amd64_record_regmap): For record_regmap.
	(amd64_init_abi): Set amd64_record_regmap to record_regmap.

2009-08-08  Pedro Alves  <[email protected]>

	* bfd-target.c (struct target_bfd_data): New.
	(target_bfd_xfer_partial): Adjust to get at the section table from
	the new structure.
	(target_bfd_get_section_table): Ditto.
	(target_bfd_xclose): Ditto.  Get the bfd pointer from the
	target_bfd_data structure, from the section table.
	(target_bfd_reopen): Store a struct target_bfd_data in the
	target_ops to_data field, instead of a target_section_table.

2009-08-08  Aleksandar Ristovski  <[email protected]>
            Hui Zhu  <[email protected]>

	* record.c (record_store_registers): Remove unused variable.

2009-08-07  Tom Tromey  <[email protected]>

	* language.c (set_language_command): Strip whitespace.
	(set_type_command): Likewise.
	(set_range_command): Likewise.

2009-08-07  Tom Tromey  <[email protected]>

	PR gdb/8869:
	* language.c (language_completer): New function.
	(range_or_type_completer): New function.
	(case_completer): New function.
	(_initialize_language): Set completers.
	* cli/cli-decode.c (add_setshow_string_cmd): Return the "set"
	command.
	(add_setshow_string_noescape_cmd): Likewise.
	(add_setshow_integer_cmd): Likewise.
	(add_setshow_uinteger_cmd): Likewise.
	(add_setshow_zinteger_cmd): Likewise.
	(add_setshow_zuinteger_cmd): Likewise.
	* command.h (add_setshow_string_cmd,
	add_setshow_string_noescape_cmd, add_setshow_uinteger_cmd,
	add_setshow_zinteger_cmd, add_setshow_zuinteger_cmd): Update.

2009-08-06  Paul Pluzhnikov  <[email protected]>
	
	gold/10400
	* dwarf2-frame.c (qsort_fde_cmp): Use stable sort.	
	
2009-08-06  Paul Pluzhnikov  <[email protected]>

	* dwarf2-frame.c (struct dwarf2_cie): Remove 'next'.
	(struct dwarf2_cie_table): New.
	(struct dwarf2_fde): Remove 'next'.
	(struct dwarf2_fde_table): New.
	(struct comp_unit): Remove 'cie'.
	(bsearch_cie_cmp, bsearch_fde_cmp): New function.
	(find_cie, dwarf2_frame_find_fde): Use bsearch.
	(add_cie, add_fde): Use array instead of linked list.
	(decode_frame_entry, decode_frame_entry_1): New parameters.
	(qsort_fde_cmp): New function.
	(dwarf2_build_frame_info): Adjust.
	
2009-08-06  Don Lee <[email protected]>

	* score-tdep.c: Support a new Sunplus CT S+core variant, S+core 3.
	* score-tdep.h: Ditto.
	* NEWS: Ditto.
	* configure.tgt: Test do we have a simulator.
	* MAINTAINERS: Add myself under target score

2009-08-06  Nick Roberts  <[email protected]>

	* utils.c (defaulted_query): Don't ask for confirmation if server
	prefix is used.

2009-08-05  Tom Tromey  <[email protected]>

	* spu-tdep.h (SPUADDR_SPU): Cast result to int.

2009-08-04  Paul Pluzhnikov  <[email protected]>

	* objfiles.h (OBJF_KEEPBFD): Delete.
	(gdb_bfd_unref): New prototype.
	* objfiles.c (gdb_bfd_unref): New function.
	(free_objfile): Call gdb_bfd_unref.
	* solib.c (free_so): Likewise.
	(symbol_add_stub): Set refcount.

2009-08-04  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* record.c (record_mem_entry): New field 'mem_entry_not_accessible'.
	(record_arch_list_add_mem): Initialize 'mem_entry_not_accessible'.
	(record_wait): Set 'mem_entry_not_accessible' flag if target
	memory not readable.  Don't try to change target memory if
	'mem_entry_not_accessible' is set.

2009-08-03  Richard Guenther  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	Fix memory corruption on reread of file through a symbolic link.
	* symfile.c (find_separate_debug_file): Initialize CANON_NAME earlier.
	Allocate DEBUGFILE with length based on CANON_NAME.  Free CANON_NAME on
	all the return paths.

2009-08-03  Jim Ingham  <[email protected]>
	    Vladimir Prus  <[email protected]>

	Implement -break-commands

	* breakpoint.c (get_breakpoint, breakpoint_set_commands): New.
	(commands_command): Use breakpoint_set_commands.
	* breakpoint.h (get_breakpoint, breakpoint_set_commands): Declare.

	* mi/mi-cmds.h (mi_cmd_break_commands): New.
	* mi/mi-cmds.c: Register -break-commands.
	* mi/mi-cmd-break.c (mi_cmd_break_commands, mi_read_next_line)
	(mi_command_line_array, mi_command_line_array_cnt)
	(mi_command_line_array_ptr): New.

2009-08-03  Jim Ingham  <[email protected]>
	    Vladimir Prus  <[email protected]>

	Refactor reading of commands

	* defs.h (read_command_lines_1): Declare.
	* cli/cli-script.c (read_next_line): Only return string,
	do not process.
	(process_next_line): New, extracted from read_next_line.
	(recurse_read_control_structure): Take a function pointer to the
	read function.
	(get_command_line) Pass the read_next_line as reader function
	into recurse_read_control_structure.
	(read_command_lines_1): New, extracted from...
	(read_command_lines): ...here.

2009-07-31  Kazu Hirata  <[email protected]>

	* procfs.c (proc_set_current_signal): Populate mysinfo before
	copying it to arg.
	(proc_clear_current_signal): Likewise.
	(proc_set_watchpoint): Populate pwatch before copying it to arg.

2009-07-31  Michael Snyder  <[email protected]>

	* remote.c (store_register_using_P): Call putpkt and getpkt
	directly instead of calling remote_send.
	(store_registers_using_G): Ditto.
	(fetch_register_using_p): Ditto.

	* remote.c (store_register_using_P): Make error msg more verbose.
	(store_registers_using_G): Ditto.
	(fetch_register_using_p): Ditto.

2009-07-31  Ulrich Weigand  <[email protected]>

	* spu-tdep.c: Include "infcall.h".
	(spu_address_class_type_flags): New function.
	(spu_address_class_type_flags_to_name): Likewise.
	(spu_address_class_name_to_type_flags): Likewise.
	(spu_pointer_to_address): Handle __ea pointers.
	(spu_auto_flush_cache_p): New static variable.
	(spu_objfile_from_frame): New function.
	(flush_ea_cache, spu_attach_normal_stop): Likewise.
	(show_spu_auto_flush_cache): Likewise.
	(spu_gdbarch_init): Install address class handlers.
	(_initialize_spu_tdep): Attach to normal_stop observer.
	Install "set spu auto-flush-cache" / "show spu auto-flush-cache"
	commands.

	* NEWS: Mention "set/show spu auto-flush-cache" commands.

2009-07-31  Ulrich Weigand  <[email protected]>

	* spu-tdep.c: Include "block.h".
	(setspucmdlist, showspucmdlist): New static variables.
	(spu_stop_on_load_p): Likewise.
	(spu_catch_start): New function.
	(show_spu_command, set_spu_command): New functions.
	(show_spu_stop_on_load): Likewise.
	(_initialize_spu_tdep): Attach spu_catch_start to new_objfile observer.
	Install "set spu" / "show spu" prefix command handler.
	Install "set spu stop-on-load" / "show spu stop-on-load" command.

	* NEWS: Mention "set/show spu stop-on-load" commands.

2009-07-31  Ulrich Weigand  <[email protected]>

	* ppc-linux-tdep.c: Include "solib.h", "solist.h", "exceptions.h",
	"arch-utils.h", and "spu-tdep.h".
	(spu_context_objfile, spe_context_lm_addr, spe_context_offset):
	New static variables.
	(spe_context_cache_ptid, spe_context_cache_address): Likewise.
	(ppc_linux_spe_context_lookup): New function.
	(ppc_linux_spe_context_inferior_created): Likewise.
	(ppc_linux_spe_context_solib_loaded): Likewise.
	(ppc_linux_spe_context_solib_unloaded): Likewise.
	(ppc_linux_spe_context): Likewise.
	(struct ppu2spu_cache, struct ppu2spu_data): New data types.
	(ppu2spu_prev_arch, ppu2spu_this_id, ppu2spu_prev_register,
	ppu2spu_unwind_register, ppu2spu_sniffer,
	ppu2spu_dealloc_cache): New functions.
	(ppu2spu_unwind): New static variable.
	(ppc_linux_init_abi): Install cross-architecture unwinder.
	(_initialize_ppc_linux_tdep): Attach to observers.

	* spu-tdep.c (struct spu2ppu_cache): New data type.
	(spu2ppu_prev_arch, spu2ppu_this_id, spu2ppu_prev_register,
	spu2ppu_sniffer, spu2ppu_dealloc_cache): New functions.
	(spu2ppu_unwind): New static variable.
	(spu_gdbarch_init): Install cross-architecture unwinder.

2009-07-31  Ulrich Weigand  <[email protected]>

	* target.h (enum strata): New value arch_stratum.
	* target.c (target_require_runnable): Skip arch_stratum targets.

	* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
	solib-spu.o and spu-multiarch.o to gdb_target_obs.
	* Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
	(ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.

	* solib-spu.c: New file.
	* solib-spu.h: New file.
	* spu-multiarch.c: New file.

	* spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.

	* spu-tdep.c (struct gdbarch_tdep): New member id.
	(spu_gdbarch_id): New function.
	(spu_lslr): New function.

	(spu_address_to_pointer): New function.
	(spu_pointer_to_address): Support SPU ID address encoding.  Use
	spu_gdbarch_id and spu_lslr.
	(spu_integer_to_address): Likewise.
	(spu_frame_unwind_cache): Update for encoded addresses.
	(spu_unwind_pc, spu_unwind_sp): Likewise.
	(spu_read_pc, spu_write_pc): Likewise.
	(spu_push_dummy_call): Likewise.
	(spu_software_single_step): Likewise.
	(spu_get_longjmp_target): Likewise.
	(spu_overlay_update_osect): Likewise.

	(spu_dis_asm_print_address): New function.
	(gdb_print_insn_spu): Likewise.

	(spu_gdbarch_init): Store SPU ID in tdep structure.
	Install spu_address_to_pointer and gdb_print_insn_spu.

	* ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
	and "solib-spu.h".
	(ppc_linux_entry_point_addr): New static variable.
	(ppc_linux_inferior_created): New function.
	(ppc_linux_displaced_step_location): Likewise.
	(ppc_linux_init_abi): Enable Cell/B.E. support if supported
	by the target.
	(_initialize_ppc_linux_tdep): Attach to inferior_created observer.

	* NEWS: Mention multi-architecture and Cell/B.E. debugging
	capabilities.

2009-07-31  Ulrich Weigand  <[email protected]>

	* linux-nat.c: Include <sys/vfs.h>.
	(SPUFS_MAGIC): Define.
	(spu_enumerate_spu_ids): New function.
	(linux_proc_xfer_spu): New function.
	(linux_xfer_partial): Handle TARGET_OBJECT_SPU.

	(iterate_over_spus): New function.
	(struct linux_spu_corefile_data): New data type.
	(linux_spu_corefile_callback): New function.
	(linux_spu_make_corefile_notes): New function.
	(linux_nat_make_corefile_notes): Call it.

	* corelow.c (struct spuid_list): New data type.
	(add_to_spuid_list): New function.
	(core_xfer_partial): Handle TARGET_OBJECT_SPU.

2009-07-31  Ulrich Weigand  <[email protected]>

	* features/Makefile: Allow sub-platform specific expedite settings.
	(WHICH): Add rs6000/powerpc-cell32l and rs6000/powerpc-cell64l.
	(rs6000/powerpc-cell32l-expedite): Define.
	(rs6000/powerpc-cell64l-expedite): Likewise.
	* features/rs6000/powerpc-cell32l.xml: New file.
	* features/rs6000/powerpc-cell64l.xml: New file.
	* features/rs6000/powerpc-cell32l.c: New generated file.
	* features/rs6000/powerpc-cell64l.c: New generated file.

	* regformats/rs6000/powerpc-cell32l.dat: New generated file.
	* regformats/rs6000/powerpc-cell64l.dat: New generated file.

	* config/djgpp/fnchange.lst: Add mappings for new files.

	* ppc-linux-tdep.h (tdesc_powerpc_cell32l): Add prototype.
	(tdesc_powerpc_cell64l): Likewise.
	* ppc-linux-tdep.c: Include "features/rs6000/powerpc-cell32l.c"
	and "features/rs6000/powerpc-cell64l.c".
	(_initialize_ppc_linux_tdep): Initialize target descriptions.
	(ppc_linux_spu_section): New function.
	(ppc_linux_core_read_description): Detect Cell/B.E. core files.
	* ppc-linux-nat.c (PPC_FEATURE_CELL): Define.
	(ppc_linux_read_description): Detect Cell/B.E. architecture.

	* rs6000-tdep.c (rs6000_gdbarch_init): Do not trust BFD wordsize
	if exec file is not PowerPC architecture.

2009-07-31  Ulrich Weigand  <[email protected]>

	* features/gdb-target.dtd (target): Accept optional
	<compatible> elements.
	(compatible): Define element.

	* target-descriptions.h (tdesc_compatible_p): New.
	(tdesc_add_compatible): New.
	* target-descriptions.c (arch_p): New VEC_P type.
	(struct target_desc): New member compatible.
	(free_target_description): Handle it.
	(maint_print_c_tdesc_cmd): Likewise.
	(tdesc_compatible_p): New function.
	(tdesc_add_compatible): New function.

	* xml-tdesc.c (tdesc_end_compatible): New function.
	(target_children): Handle <compatible> element.

	* arch-utils.c (choose_architecture_for_target): Accept target
	description instead of BFD architecture as input.  Query target
	description for compatible architectures.
	(gdbarch_info_fill): Update call.

	* NEWS: Mention <compatible> element of target descriptions.

2009-07-31  Ulrich Weigand  <[email protected]>

	* breakpoint.c (remove_breakpoints): If removing one breakpoint
	location fails, still continue to remove other locations.
	(remove_hw_watchpoints): Likewise.
	(detach_breakpoints): Likewise.

2009-07-31  Ulrich Weigand  <[email protected]>

	* breakpoint.h (enum enable_state): Add bp_startup_disabled.
	(disable_breakpoints_before_startup): Add prototype.
	(enable_breakpoints_after_startup): Likewise.

	* breakpoint.c (executing_startup): New static variable.
	(describe_other_breakpoints): Handle bp_startup_disabled.
	(check_duplicates_for): Likewise.
	(disable_breakpoints_before_startup): New function.
	(enable_breakpoints_after_startup): New function.
	(create_breakpoint): Mark new breakpoints as bp_startup_disabled
	if executing_startup flag is true.
	(break_command_really): Likewise.
	(breakpoint_re_set_one): Skip bp_startup_disabled breakpoints.

2009-07-31  Julian Brown  <[email protected]>

	* arm-linux-tdep.c (arch-utils.h, inferior.h, gdbthread.h, symfile.h):
	Include files.
	(arm_linux_cleanup_svc, arm_linux_copy_svc): New.
	(cleanup_kernel_helper_return, arm_catch_kernel_helper_return): New.
	(arm_linux_displaced_step_copy_insn): New.
	(arm_linux_init_abi): Initialise displaced stepping callbacks.
	* arm-tdep.c (DISPLACED_STEPPING_ARCH_VERSION): New macro.
	(ARM_NOP): New.
	(displaced_read_reg, displaced_in_arm_mode, branch_write_pc)
	(bx_write_pc, load_write_pc, alu_write_pc, displaced_write_reg)
	(insn_references_pc, copy_unmodified, cleanup_preload, copy_preload)
	(copy_preload_reg, cleanup_copro_load_store, copy_copro_load_store)
	(cleanup_branch, copy_b_bl_blx, copy_bx_blx_reg, cleanup_alu_imm)
	(copy_alu_imm, cleanup_alu_reg, copy_alu_reg)
	(cleanup_alu_shifted_reg, copy_alu_shifted_reg, cleanup_load)
	(cleanup_store, copy_extra_ld_st, copy_ldr_str_ldrb_strb)
	(cleanup_block_load_all, cleanup_block_store_pc)
	(cleanup_block_load_pc, copy_block_xfer, cleanup_svc, copy_svc)
	(copy_undef, copy_unpred): New.
	(decode_misc_memhint_neon, decode_unconditional)
	(decode_miscellaneous, decode_dp_misc, decode_ld_st_word_ubyte)
	(decode_media, decode_b_bl_ldmstm, decode_ext_reg_ld_st)
	(decode_svc_copro, arm_process_displaced_insn)
	(arm_displaced_init_closure, arm_displaced_step_copy_insn)
	(arm_displaced_step_fixup): New.
	(arm_gdbarch_init): Initialise max insn length field.
	* arm-tdep.h (DISPLACED_TEMPS, DISPLACED_MODIFIED_INSNS): New
	macros.
	(displaced_step_closure, pc_write_style): New.
	(arm_displaced_init_closure, displaced_read_reg)
	(arm_process_displaced_insn, arm_displaced_init_closure)
	(displaced_read_reg, displaced_write_reg, arm_displaced_step_copy_insn)
	(arm_displaced_step_fixup): Add prototypes.

2009-07-31  Pedro Alves  <[email protected]>
	    Julian Brown  <[email protected]>

	* infrun.c (displaced_step_fixup): If this is a software
	single-stepping arch, don't tell the target to single-step.
	(maybe_software_singlestep): Return 0 if we're using displaced
	stepping.
	(resume): If this is a software single-stepping arch, and
	displaced-stepping is enabled, use it for all single-step
	requests.

2009-07-30  Ralf Wildenhues  <[email protected]>

	* Makefile.in (ACLOCAL, ACLOCAL_AMFLAGS, aclocal_m4_deps)
	(AUTOCONF, configure_deps, AUTOHEADER): New variables.
	($(srcdir)/aclocal.m4, $(srcdir)/configure, $(srcdir)/config.in)
	(am--refresh): New rules.
	(stamp-h, config.status): List config.in and configure including
	$(srcdir)/ prefix.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2009-07-30  Thomas Schwinge  <[email protected]>

	* gnu-nat.c (add_task_commands) <stopped>: Register the correct
	callback function.

2009-07-30  H.J. Lu  <[email protected]>

	* ia64-tdep.c (ia64_access_reg): Correct paddress.

2009-07-30  Jan Kratochvil  <[email protected]>

	Replace public function varobj_list by all_root_varobjs iterator.
	* mi/mi-cmd-var.c (struct mi_cmd_var_update, mi_cmd_var_update_iter):
	New.
	(mi_cmd_var_update): Replace the varobj_list call by all_root_varobjs.
	Remove the variables rootlist, cr.  New variable data.
	* varobj.c (rootcount, varobj_list): Remove.
	(install_variable, uninstall_variable): Remove the rootcount updates.
	(all_root_varobjs): New function.
	(varobj_invalidate): Use the all_root_varobjs call.  Move the code to...
	(varobj_invalidate_iter): ... a new function.
	* varobj.h (varobj_list): Remove the prototype.
	(all_root_varobjs): New prototype.

2009-07-29  Paul Pluzhnikov  <[email protected]>

	PR gdb/6817
	* dbxread.c (read_dbx_symtab): Reduce stack use.
	
2009-07-29  Jan Kratochvil  <[email protected]>

	Fix gcc-4.5 HEAD warnings.
	* cp-name-parser.y (%union <typed_val_int>, %token GLOBAL)
	(GLOBAL_CONSTRUCTORS, GLOBAL_DESTRUCTORS, demangler_special <GLOBAL>):
	Remove.
	(yylex <"global constructors keyed to ">)
	(yylex <"global destructors keyed to ">): Base it on DEMANGLER_SPECIAL.
	(cp_comp_to_string): Remove variables str, prefix and buf.  Remove the
	GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS handling.
	(cp_print): Remove the GLOBAL_DESTRUCTORS and GLOBAL_CONSTRUCTORS
	handling.

2009-07-28  Daniel Jacobowitz  <[email protected]>

	* NEWS: Mention ARM VFP support.
	* target-descriptions.c (tdesc_register_type): Make public.
	(tdesc_unnumbered_register): New function.
	(tdesc_register_reggroup_p): Allow missing
	pseudo_register_reggroup_p.
	* target-descriptions.h (tdesc_register_type): Declare.
	(tdesc_unnumbered_register): Declare.
	* arm-tdep.c (arm_neon_quad_read, arm_neon_quad_write): New functions.
	(arm_push_dummy_call): Use arm_neon_quad_write.
	(arm_neon_double_type, arm_neon_quad_type): New functions.
	(arm_register_type): Handle VFP and NEON registers.  Override the
	types of double-precision registers for NEON.  Disable FPA registers
	if they are not present.
	(arm_dwarf_reg_to_regnum): Add current VFP and NEON register numbers.
	(arm_return_value): Use arm_neon_quad_write and arm_neon_quad_read.
	(arm_register_name): Handle VFP single and NEON quad registers.
	(arm_pseudo_read, arm_pseudo_write): New functions.
	(arm_gdbarch_init): Check for VFP and NEON in the target description.
	Assign numbers to double-precision registers.  Register VFP and NEON
	pseudo registers.  Remove a shadowed "i" variable.
	* arm-tdep.h (enum gdb_regnum): Add ARM_D0_REGNUM and
	ARM_D31_REGNUM.
	(struct gdbarch_tdep): Add have_neon_pseudos, have_neon,
	have_vfp_registers, have_vfp_pseudos, neon_double_type,
	and neon_quad_type.

	* features/Makefile: Make expedite settings only architecture
	specific.
	(WHICH): Add new ARM descriptions.
	* features/arm-with-neon.xml, features/arm-with-vfpv2.c,
	features/arm-with-vfpv3.c, features/arm-vfpv2.xml,
	features/arm-vfpv3.xml, features/arm-with-vfpv2.xml,
	features/arm-with-vfpv3.xml, features/arm-with-neon.c: New files.
	* regformats/arm-with-neon.dat, regformats/arm-with-vfpv2.dat,
	regformats/arm-with-vfpv3.dat: Generate.

2009-07-28  Daniel Jacobowitz  <[email protected]>

	* infrun.c (handle_inferior_event): Clear trap_expected after
	stepping past a single-step breakpoint.

2009-07-28  Joseph Myers  <[email protected]>

	* arm-tdep.c (enum arm_vfp_cprc_base_type,
	arm_vfp_cprc_unit_length, arm_vfp_cprc_reg_char,
	arm_vfp_cprc_sub_candidate, arm_vfp_call_candidate,
	arm_vfp_abi_for_function): New.
	(arm_push_dummy_call): Handle VFP ABI.
	(arm_extract_return_value, arm_store_return_value): Handle
	ARM_FLOAT_VFP case.
	(arm_return_value): Handle VFP ABI.
	(arm_gdbarch_init): Default fp_model based on Tag_ABI_VFP_args for
	EABI binaries.

2009-07-28  Daniel Jacobowitz  <[email protected]>

	* arch-utils.c (displaced_step_at_entry_point): Do not call
	gdbarch_convert_from_func_ptr_addr.
	* cris-tdep.c: Remove outdated comment.
	* infcall.c (call_function_by_hand): Do not call
	gdbarch_convert_from_func_ptr_addr after entry_point_address.
	* objfiles.c (entry_point_address): Call both
	gdbarch_convert_from_func_ptr_addr and
	gdbarch_addr_bits_remove.

2009-07-28  Aleksandar Ristovski  <[email protected]>

	* nto-tdep.c (nto_thread_state_str): New array.
	(nto_extra_thread_info): New function definition.
	* nto-tdep.h (gdbthread.h): New include.
	(private_thread_info): New struct.
	(nto_extra_thread_info): New declaration.
	* nto-procfs.c (procfs_thread_alive): Properly check if
	thread is still alive.
	(update_thread_private_data_name, update_thread_private_data): New
	function definition.
	(procfs_find_new_threads): Fetch thread private data.
	(init_procfs_ops): Register to_extra_thread_info.

2009-07-25  Pedro Alves  <[email protected]>

	* stack.c (backtrace_command_1): Remove dead check of NULL current
	frame.

2009-07-23  Keith Seitz  <[email protected]>

	* source.c (forward_search_command): Don't fclose the stream,
	just run the cleanups.
	(reverse_search_command): Likewise.

2009-07-23  Paul Pluzhnikov  <[email protected]>

	* symtab.c (search_symbols): Add QUIT.
	
2009-07-22  Paul Pluzhnikov  <[email protected]>

	* symfile.c (symbol_file_add_with_addrs_or_offsets): Call observer.
	
2009-07-22  Paul Pluzhnikov  <[email protected]>

	* objfiles.h (objfiles_changed): New prototype.
	* objfiles.c (objfiles_updated_p): Rename to objfiles_changed_p.
	(allocate_objfile, free_objfile): Must rebuild section map.
	(objfile_relocate): Likewise.
	(update_section_map, find_pc_section): Adjust.
	(set_objfiles_updated_on_exe_change): Remove.
	(set_objfiles_updated_on_solib_activity): Remove.
	(_initialize_objfiles): Remove.
	(objfiles_changed): New function.
	* symfile.c (reread_symbols): Call objfiles_changed.	
	
2009-07-22  Hui Zhu  <[email protected]>

	* record.c (record_xfer_partial): Call error When nquery
	return "n".

2009-07-21  Paul Pluzhnikov  <[email protected]>
	
	* objfiles.c (objfiles_updated_p): New variable.
	(qsort_cmp, bsearch_cmp, update_section_map): New function.
	(find_pc_section): Use bsearch.
	(set_objfiles_updated_on_exe_change): New function.
	(set_objfiles_updated_on_solib_activity): New function.
	(_initialize_objfiles): New function.
	
2009-07-21 Michael Eager <[email protected]>

	* features/rs6000/powerpc-405.xml: New.
	* rs6000-tdep.c: Add include & initialize for
	powerpc-405.c, add 405 to variants.
	* features/rs6000/powerpc-405.c: Generate.

2009-07-21  Paul Pluzhnikov  <[email protected]>

	* utils.c (internal_vproblem): Always print failure message.

2009-07-21  Daniel Jacobowitz  <[email protected]>
	    Vladimir Prus <[email protected]>

	* valops.c (value_fetch_lazy): Handle bitfields explicitly.
	(value_assign): Remove unnecessary FIXME.  Honor the container
	type of bitfields if possible.
	* value.c (struct value): Add parent field.
	(value_parent): New function.
	(value_free): Free the parent also.
	(value_copy): Copy the parent also.
	(value_primitive_field): Do not read the contents of a lazy
	value to create a child bitfield value.  Set bitpos and offset
	according to the container type if possible.
	(unpack_bits_as_long): Rename from unpack_field_as_long.  Take
	field_type, bitpos, and bitsize instead of type and fieldno.
	(unpack_field_as_long): Use unpack_bits_as_long.
	* value.h (value_parent, unpack_bits_as_long): New prototypes.

2009-07-21  Daniel Jacobowitz  <[email protected]>

	* value.c (struct value): Add reference_count field.
	(allocate_value_lazy): Initialize reference_count.
	(value_incref): New function.
	(value_free): Check the reference count.
	* value.h (value_incref): New prototype.

2009-07-20  Marc Khouzam  <[email protected]>

	* utils.c (defaulted_query): Update comment and remove dead code.

2009-07-20  Doug Evans  <[email protected]>

	Add support for "comdat types" from DWARF4.
	* dwarf2read.c (dwarf2_per_objfile): New member types,
	signatured_types.
	(TYPES_SECTION): New macro.
	(dwarf2_per_cu_data): Change size of length field from 30 bits
	to 29 bits.  New member from_debug_types.
	(signatured_type): New struct.
	(struct attribute): New union member signatured_type.
	(DW_SIGNATURED_TYPE): New macro.
	(dwarf2_attr_no_follow): New function.
	(read_type_unit_scope): New function.
	(follow_die_ref_or_sig, follow_die_sig): New functions.
	(dwarf2_locate_sectoins): Handle .debug_types.
	(dwarf2_build_psymtabs): Read .debug_types.
	(read_type_comp_unit_head): New function.
	(hash_type_signature, eq_type_signature): New functions.
	(create_debug_types_hash_table): New function.
	(lookup_signatured_type): New function.
	(process_psymtab_comp_unit): Handle type units too.
	(process_type_comp_unit, build_type_psymtabs): New functions.
	(dwarf2_build_psymtabs_hard): Call build_type_psymtabs.
	(load_partial_comp_unit): Assert not called for a type unit.
	(skip_one_die): Handle DW_FORM_sig8.
	(queue_comp_unit): Don't call load_full_comp_unit here, or
	update read_in_chain.
	(psymtab_to_symtab_1): Call read_signatured_type_at_offset for
	type units, or load_full_comp_unit for comp units after
	queue_comp_unit returns.
	(load_full_comp_unit): Assert not called for type units.
	(load_full_comp_unit): Update read_in_chain here.
	(process_die): Handle DW_TAG_type_unit.
	(read_structure_type): Look for signatured types.
	(read_enumeration_type): Ditto.
	(init_cu_die_reader): Handle .debug_types.
	(read_comp_unit): Assert hash not computed yet.
	(read_die_and_children): Expand debugging printf to handle .debug_types.
	(read_partial_die): Handle DW_TAG_type_unit:
	(find_patial_die): Handle .debug_types.
	(read_attribute_value): Handle DW_FORM_sig8.
	(die_type): Call follow_die_ref_or_sig instead of follow_die_ref.
	(die_containing_type): Ditto.
	(dwarf_tag_name): Handle DW_TAG_type_unit.
	(dwarf_attr_name): Handle DW_AT_signature.
	(dwarf_form_name): Handle DW_FORM_sec_offset, DW_FORM_exprloc,
	DW_FORM_flag_present, DW_FORM_sig8.
	(dump_die_shallow): Handlel DW_FORM_sig8.
	(maybe_queue_comp_unit): Change return type to int from void.
	All callers updated.
	(follow_die_ref): Handle .debug_types.
	(lookup_signatured_type_at_offset): New function.
	(read_signatured_type_at_offset): New function.
	(read_signatured_type): New function.

2009-07-20  Ulrich Weigand  <[email protected]>

	* arch-utils.c (gdbarch_info_fill): Only reference GDB_OSABI_DEFAULT
	if the macro is defined.

2009-07-20  Pedro Alves  <[email protected]>

	* features/gdb-target.dtd (target): Accept an optional 'osabi'
	element.
	(osabi): Define element.
	* features/mips-linux.xml (target): Add an osabi subelement set to
	GNU/Linux.
	* regformats/regdat.sh (xmlarch, xmlosabi): New variables.  Don't
	write the architecture into $xmltarget.  Store it in $xmlarch.
	Handle the 'osabi' type.  Handle outputting the osabi element of
	the target description.
	* regformats/reg-x86-64-linux.dat (osabi): Set to GNU/Linux.
	* regformats/reg-i386-linux.dat (osabi): Set to GNU/Linux.

	* target-descriptions.h (tdesc_osabi, set_tdesc_osabi): Declare.
	* target-descriptions.c (struct target_desc) <osabi>: New field.
	(tdesc_osabi): New function.
	(set_tdesc_osabi): New function.
	* xml-tdesc.c: Include osabi.h.
	(tdesc_end_osabi): New.
	(target_children): Parse "osabi" elements.
	* arch-utils.c (gdbarch_info_fill): Try to get the osabi from the
	target description if the user didn't override it or it is not
	extractable from the bfd.  If that still fails, fallback to the
	configured in default.
	* osabi.h (osabi_from_tdesc_string): Declare.
	* osabi.c (osabi_from_tdesc_string): New.
	(gdbarch_lookup_osabi): Return GDB_OSABI_UNKNOWN instead of
	GDB_OSABI_DEFAULT.

	* NEWS: Mention that target descriptions can now describe the
	target OS ABI.

2009-07-20  Mike Frysinger  <[email protected]>

	* configure.ac (AC_CHECK_FUNCS): Check for pipe.
	* config.in, configure: Regenerate.
	* tui/tui-io.c (TUI_USE_PIPE_FOR_READLINE): Define if HAVE_PIPE.

2009-07-20  Pedro Alves  <[email protected]>

	* gnu-nat.c: Include "inf-child.h".
	(gnu_mourn_inferior): Use the passed in target_ops
	instead of the gnu_ops global.
	(gnu_create_inferior): Inline `attach_to_child', use the passed in
	target_ops instead of the gnu_ops global.
	(gnu_can_run): Delete.
	(gnu_attach): Use the passed in target_ops instead of the gnu_ops
	global.
	(gnu_detach): Ditto.
	(gnu_prepare_to_store, gnu_open): Delete.
	(gnu_store_registers, gnu_fetch_registers): Delete declarations.
	(gnu_ops): Delete.
	(init_gnu_ops): Delete.
	(gnu_target): New.
	(_initialize_gnu_nat): Don't call init_gnu_ops or add_target here.
	* gnu-nat.h (gnu_target): Declare.
	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Make
	static.
	(_initialize_i386gnu_nat): New.

2009-07-20  Ulrich Weigand  <[email protected]>

	* dwarf2loc.c (find_location_expression): Retrieve beginning and
	ending address offsets in location list entries as integers,
	not as addresses.

2009-07-20  Ulrich Weigand  <[email protected]>

	* infrun.c (wait_for_inferior): Invalidate registers and overlay
	cache every time before calling target_wait.
	(handle_inferior_event): Make static. Always reset waiton_ptid.
	Never call registers_changed.
	(prepare_to_wait): Do not invaliate registers or overlay cache
	(moved to wait_for_inferior).  Do not reset waiton_ptid (moved
	to handle_inferior_event).
	(fetch_inferior_event): Remove check for always-true condition.  

2009-07-20  Thomas Schwinge  <[email protected]>

	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Adjust to
	2009-02-23 target_ops changes.

2009-07-18  Michael Snyder  <[email protected]>

	* infrun.c (handle_inferior_event): Remove an execution_direction
	check in the "check for subroutine calls" test, and add some 
	additional handling for reverse-stepping through shared libraries.

2009-07-18  Anthony Green  <[email protected]>

	* moxie-tdep.c (moxie_analyze_prologue): Take gdbarch as last
	parameter instead of frame_info.
	(moxie_frame_cache): Call moxie_analyze_prologue with different
	args.

2009-07-17  Ulrich Weigand  <[email protected]>

	* solib.c (solib_bfd_open): Do not call ops->bfd_open.
	(solib_map_sections): Call ops->bfd_open instead of solib_bfd_open.
	* solib-frv.c (_initialize_frv_solib): Initialize bfd_open member.
	* solib-irix.c (_initialize_irix_solib): Likewise.
	* solib-null.c (_initialize_null_solib): Likewise.
	* solib-osf.c (_initialize_osf_solib): Likewise.
	* solib-pa64.c (_initialize_pa64_solib): Likewise.
	* solib-som.c (_initialize_som_solib): Likewise.
	* solib-sunos.c (_initialize_sunos_solib): Likewise.
	* solib-svr4.c (_initialize_svr4_solib): Likewise.
	* solib-target.c (_initialize_solib_target): Likewise.

2009-07-17  Ulrich Weigand  <[email protected]>

	* mi/mi-cmd-disas.c (mi_cmd_disassemble): Respect mixed_mode flag.

2009-07-16  Doug Evans  <[email protected]>

	* linux-thread.db.c (try_thread_db_load_1): Tweak comment.

2007-07-16  Paul Pluzhnikov  <[email protected]>

	* linux-thread-db.c (thread_db_find_new_threads_silently):
	New function.
	(try_thread_db_load_1): Call it.

2009-07-15  Doug Evans  <[email protected]>

	Code reorg in preparation for adding comdat types support.
	* dwarf2read.c (struct die_reader_specs): New struct.
	(locate_pdi_sibling): New arg buffer.  All callers updated.
	(load_partial_dies, read_partial_die): Ditto.
	(read_8_bytes): Change return type to ULONGEST.
	(read_comp_unit): Delete arg abfd.  All callers updated.
	(read_die_and_children_1): Delete args abfd, cu.  New arg reader.
	All callers updated.
	(read_die_and_children, read_die_and_siblings): Ditto.
	(read_full_die): Ditto.  Move closer to callers.
	(skip_one_die): New arg buffer.  All callers updated.
	(load_full_comp_unit): Change return type to void.  All callers
	updated.
	(partial_read_comp_unit_head): New args buffer, buffer_size.
	All callers updated.
	(process_psymtab_comp_unit): New function, split out from
	dwarf2_build_psymtabs_hard.
	(dwarf2_build_psymtabs_hard): Call it.
	(load_partial_comp_unit): Renamed from load_comp_unit.
	All callers updated.
	(skip_children): New arg buffer.  All callers updated.
	(init_cu_die_reader): New function.
	(is_ref_attr): New function.
	(dwarf2_get_ref_die_offset): Call it.
	(alloc_one_comp_unit): New function.

2009-07-14  Stan Shebs  <[email protected]>

	* MAINTAINERS (Global Maintainers): Add Doug Evans.

2009-07-14  Stan Shebs  <[email protected]>

	Conditional tracepoints.
	* ax-gdb.h (gen_eval_for_expr): Declare.
	* ax-gdb.c (gen_expr): Generate bytecodes for BINOP_EQUAL
	and other comparisons.
	(gen_eval_for_expr): New function.
	(agent_eval_command): New maintenance command.
	(_initialize_ax_gdb): Define the command.
	* remote.c (struct remote_state): New field cond_tracepoints.
	(PACKET_ConditionalTracepoints): New packet config type.
	(remote_cond_tracepoint_feature): New function.
	(remote_protocol_features): Add ConditionalTracepoints.
	(remote_supports_cond_tracepoints): New function.
	(_initialize_remote): Add ConditionalTracepoints.
	* tracepoint.c (download_tracepoint): Add conditional.
	* NEWS: Mention conditional tracepoints.

2009-07-14  Ulrich Weigand  <[email protected]>

	* objfiles.c (objfile_relocate): Do not relocate the same
	BLOCKVECTOR_MAP address map multiple times.

2009-07-14  Ulrich Weigand  <[email protected]>

	* remote.c (process_stop_reply): Access expedited target registers
	in target_gdbarch.

2009-07-13  Jan Kratochvil  <[email protected]>

	Fix memory access from signed 32bit inferior registers on 64bit GDB.
	* linux-nat.c (linux_xfer_partial <TARGET_OBJECT_MEMORY>): New variable
	addr_bit.  Mask OFFSET by the ADDR_BIT width.

2009-07-13  Anthony Green  <[email protected]>

	* moxie-tdep.c (moxie_gdbarch_init): Call
	set_gdbarch_process_record.
	(moxie_process_record): New.
	(moxie_process_readu): New.

2009-07-12  Michael Snyder  <[email protected]>

	* i386-tdep.c: Add a frame unwinder for function epilogues.
	(i386_in_function_epilogue_p): New function.
	(i386_epilogue_frame_sniffer): New function.
	(i386_epilogue_frame_cache): New function.
	(i386_epilogue_frame_this_id): New function.
	(i386_epilogue_frame_unwind): New struct frame_unwind.
	(i386_gdbarch_init): Hook the new unwinder.

2009-07-11  Hui Zhu  <[email protected]>

	* cli/cli-cmds.c (disassemble_command): Add a new modifier /r
	to "disassemble" command to print the raw instructions in hex as
	well as in symbolic form.
	(init_cli_cmds): Ditto.
	(print_disassembly): Change "mixed" to "flags" to translate
	the behavior of disassemble.
	(disassemble_current_function): Ditto.
	* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
	* stack.c (gdb_disassembly_stub): Ditto.
	* disasm.c (do_mixed_source_and_assembly): Ditto.
	(do_mixed_source_and_assembly): Ditto.
	(do_assembly_only): Ditto.
	(gdb_disassembly): Ditto.
	(dump_insns): print the raw instructions in hex as well as in
	symbolic form if DISASSEMBLY_RAW_INSN and flags is true.
	* disasm.h (DISASSEMBLY_SOURCE): Include source code with the
	assembly if it and flags is true.
	(DISASSEMBLY_RAW_INSN): Include the raw instructions in hex with
	the assembly if it and flags is true.
	(gdb_disassembly): Update extern.
	* NEWS: Document disassemble/r support.

2009-07-10  Tom Tromey  <[email protected]>

	* dwarf2-frame.c: Include dwarf2.h, not elf/dwarf2.h.
	* dwarf2expr.c: Likewise.
	* dwarf2loc.c: Likewise.
	* dwarf2read.c: Likewise.
	* sh-tdep.c: Likewise.
	* xtensa-tdep.c: Likewise.

2009-07-10  Jan Kratochvil  <[email protected]>

	Tidy up the code.
	* mi/mi-cmd-var.c (mi_cmd_var_update): Remove variable nv.  Move
	variables var, rootlist and cr to their local sub-block.  Move the
	make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end
	and do_cleanups calls to the common base block.  Remove the zero NV
	check.

2009-07-10 Phil Muldoon  <[email protected]>

	* python/python-internal.h (apply_varobj_pretty_printer): Update
	definition.
	(python_string_to_target_python_string): Add definition.
	* python/python-utils.c (unicode_to_encoded_python_string)
	(unicode_to_target_python_string)
	(python_string_to_target_python_string): New Functions.
	* python/python-prettyprint.c (pretty_print_one_value): Likewise.
	(print_string_repr): Refactor to logic to account for PyObject
	returned strings.
	(apply_varobj_pretty_printer): Likewise.
	* python/python-value.c (valpy_string): Parse length keyword. Use
	length keyword in LA_GET_STRING.
	* varobj.c (value_get_print_value): Refactor logic to account for
	PyObject returned strings.
	* c-lang.c (c_get_string): If the length parameter is specified,
	use that. Return value in characters. Update comments.
	* language.h: Update c_get_string prototype comments.

2009-07-09  Doug Evans  <[email protected]>

	* i386-tdep.c (i386_displaced_step_fixup): Fix order of arguments
	to read_memory_unsigned_integer.

2009-07-09  Jan Kratochvil  <[email protected]>

	Report error on inaccessible memory.
	* cli/cli-dump.c: Include gdbcore.h.
	(dump_memory_to_file): Call read_memory instead of target_read_memory.

2009-07-09  Hui Zhu  <[email protected]>

	* solib.c (solib_bfd_open): Output a warning if solib's
	architecture is not compatible with inferior's architecture.

2009-07-09  Ulrich Weigand  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	* target.h (struct target_ops <to_thread_architecture>): Describe it.
	(target_thread_architecture): Refer to to_thread_architecture.

2009-07-08  Pierre Muller  <[email protected]>

	* cli/cli-cmds.c (init_cli_cmds): Add "inf" alias for "info" command.

2009-07-07  Ulrich Weigand  <[email protected]>

	* tui/tui-stack.c (tui_make_status_line): Display PC as ?? if unknown.

2009-07-07  Pierre Muller  <[email protected]>

	* breakpoint.c (set_raw_breakpoint): Remove static modifier.

2009-07-07  Tom Tromey  <[email protected]>

	* c-lang.c (convert_octal): Only allow 3 octal digits.
	(print_wchar): Prefer 3-digit octal form.  Fall back to hex if
	needed.
	* c-exp.y (c_parse_escape): Only allow 3 octal digits.

2009-07-07  Paul Pluzhnikov  <[email protected]>

	* python/python-value.c (valpy_getitem): Remove incorrect assert.
	
2009-07-07  Paul Pluzhnikov  <[email protected]>

	* python/python-value.c (valpy_getitem): Don't return from TRY_CATCH.

2009-07-07  Sami Wagiaalla  <[email protected]>

	* cp-support.h (struct using_direct): Rename members inner and
	outer to import_src, and import_dest respectively.
	* cp-namespace.c (cp_add_using_directive): Update.
	(cp_add_using): Update.
	(cp_copy_usings): Update.
	(cp_lookup_symbol_namespace): Update.
	(cp_scan_for_anonymous_namespaces): Update.
	* cp-support.c (make_symbol_overload_list_using): Update.
	* cp-support.h (cp_add_using_directive, cp_add_using): Rename
	arguments from inner and outer to src and dest respectively.
	* cp-namespace.c (cp_add_using_directive): Ditto.
	(cp_add_using): Ditto.

2009-07-07  Jan Kratochvil  <[email protected]>

	* mi/mi-cmd-var.c (mi_cmd_var_update): Replace a while loop by for loop.
	* varobj.c (varobj_invalidate): Replace a while loop by for loop.

2009-07-07  Vladimir Prus  <[email protected]>

	Fix hang in floating varobjs.

	* varobj.c (varobj_invalidate): Advance to next
	element when processing floating varobj.

2009-07-07  Vladimir Prus  <[email protected]>

	* varobj.c: Remove unnecessary include.

2009-07-07  Tristan Gingold  <[email protected]>

	* config/i386/darwin.mh	(NATDEPFILES): Remove excServer.o.
	Remove excServer.c target.  Remove _all target.
	* darwin.defs: Removed.

2009-07-06  Aleksandar Ristovski  <[email protected]>

	* configure.tgt (i[34567]86-*-nto*): Add build_gdbserver=yes.

2009-07-06  Jan Kratochvil  <[email protected]>

	* source.c (find_and_open_source): Remove the `objfile' parameter.
	Update the function comment.
	(open_source_file, symtab_to_fullname, psymtab_to_fullname): Update the
	find_and_open_source callers.

2009-07-05  Pedro Alves  <[email protected]>

	* coff-pe-read.c (read_pe_exported_syms): Recognize
	"pe-arm-wince-little" and "pei-arm-wince-little" bfd targets as PE
	targets.

2009-07-05  Pedro Alves  <[email protected]>

	* arm-wince-tdep.c (arm_wince_skip_main_prologue): New.
	(arm_wince_init_abi): Register it as gdbarch_skip_main_prologue
	callback.

2009-06-29  Tristan Gingold  <[email protected]>

	* i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
	(amd64_darwin_thread_state_num_regs)
	(amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
	amd64-darwin-tdep.c
	(_initialize_i386_darwin_tdep): Remove 64 bits parts.
	(darwin_dwarf_signal_frame_p): Make public.
	* amd64-darwin-tdep.c: New file with most chunks from
	i386-darwin-tdep.c	
	* i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
	(amd64_darwin_thread_state_reg_offset)
	(amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
	* amd64-darwin-tdep.h: New file.
	* i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
	if BFD64 is defined.
	(i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
	64 bits parts.
	(i386_darwin_store_inferior_registers): Ditto.
	(darwin_set_sstep): Ditto.
	(darwin_complete_target): Ditto.
	(amd64_darwin_sstep_at_sigreturn): Ditto.
	* configure.tgt: Create a separate entry for x86_64-*-darwin.
	Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
	* Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
	i386-darwin-tdep.c i386-darwin-nat.c
	(ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
	
2009-07-02  Pedro Alves  <[email protected]>

	* linux-fork.c (forks_exist_p): Drop unnecessary extern.
	(add_fork, linux_fork_killall, linux_fork_mourn_inferior)
	(linux_fork_detach): Ditto.
	(delete_fork_command): Rename to ...
	(delete_checkpoint_command): ... this.
	(detach_fork_command): Rename to ...
	(detach_checkpoint_command): ... this.
	(info_forks_command): Rename to ...
	(info_checkpoints_command): ... this.
	(_initialize_linux_fork): Remove stale comments.  Adjust.

2009-07-02  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_child_follow_fork): If we're staying attached
	to the child process, enable event reporting on it.  Don't handle
	checkpoints here.  Instead, add the child fork to the lwp thread
	and inferior lists without clobbering the previous inferior.  Let
	the thread_db layer learn about a new child process, even if
	following the parent.
	(linux_nat_switch_fork): Delete lwps of the current inferior only,
	instead of clearing the whole list.  Use thread_change_ptid to
	give the core the illusion the new checkpoint is still the same
	inferior.  Clear the register cache.
	(linux_handle_extended_wait): Handle checkpoints here.
	(linux_multi_process): Turn on.
	* linux-fork.c (struct fork_info) <pc>: Remove field.
	(init_fork_list): Do not delete the checkpoint from the inferior
	list (it is not there).
	(fork_load_infrun_state): Don't switch inferior_ptid here.  Pass
	the new checkpoint's ptid to linux_nat_switch_fork.
	(fork_save_infrun_state): Make static.  Don't stop the pc field of
	fork_info, it's gone.
	(linux_fork_mourn_inferior): Don't delete the checkpoint from the
	inferior list, it's not there.
	(linux_fork_detach): Ditto.
	(delete_fork_command): Replace mention of fork/checkpoint by
	checkpoint only.
	(detach_fork_command): Likewise.  Don't delete the checkpoint from
	the inferior list.
	(info_forks_command): Adjust.
	(restore_detach_fork): Delete.
	(checkpointing_pid): New.
	(linux_fork_checkpointing_p): New.
	(save_detach_fork): Delete.
	(checkpoint_command): Delete temp_detach_fork.  Don't remove
	breakpoints, that's a nop.  Store the pid of the process we're
	checkpointing, and use make_cleanup_restore_integer to restore it.
	Don't reinsert breakpoints here.
	(process_command, fork_command): Delete.
	(restart_command): Update comments to only mention checkpoints,
	not forks.
	(_initialize_linux_fork): Delete "fork", "process", "info forks"
	commands.
	* linux-fork.h (fork_save_infrun_state, fork_list): Delete
	declarations.
	(linux_fork_checkpointing_p): Declare.
	* cli/cli-cmds.c (killlist): New.
	* cli/cli-cmds.h (killlist): Declare.
	* gdbcmd.h (killlist): Declare.
	* inferior.c: Include "gdbthread.h".
	(detach_inferior_command, kill_inferior_command)
	(inferior_command): New.
	(info_inferiors_command): Allow specifying a specific inferior id.
	(_initialize_inferiors): Register "inferior", "kill inferior" and
	"detach inferior" commands.
	* infcmd.c (_initialize_infcmd): Make "kill" a prefix command.
	* gdbthread.h (any_thread_of_process): Declare.
	* thread.c (any_thread_of_process): New.

	* NEWS: Mention multi-inferior debugging.  Mention 'info
	inferiors', 'inferior', 'detach inferior' and 'kill inferior' as
	new commands.
	(Removed commands): New section, mentioning that 'info forks',
	'fork', 'process', 'delete fork' and 'detach fork' are now gone.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbarch.sh (current_gdbarch): Remove global variable.
	(find_arch_by_info): Remove, inline into ...
	(gdbarch_find_by_info): ... this.  Remove current_gdbarch swapping.
	(deprecated_current_gdbarch_select_hack): Rename to ...
	(deprecated_target_gdbarch_select_hack): ... this.  Do not set
	or access current_gdbarch.
	* gdbarch.c, gdbarch.h: Regenerate.

	* arch-utils.c (gdbarch_update_p): Update call.
	(set_gdbarch_from_file): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* defs.h (extract_signed_integer, extract_unsigned_integer,
	extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer): Add BYTE_ORDER parameter.
	* findvar.c (extract_signed_integer, extract_unsigned_integer,
	extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer): Add BYTE_ORDER parameter.  Use it
	instead of current_gdbarch.

	* gdbcore.h (read_memory_integer, safe_read_memory_integer,
	read_memory_unsigned_integer, write_memory_signed_integer,
	write_memory_unsigned_integer): Add BYTE_ORDER parameter.
	* corefile.c (struct captured_read_memory_integer_arguments): Add
	BYTE_ORDER member.
	(safe_read_memory_integer): Add BYTE_ORDER parameter.  Store it into
	struct captured_read_memory_integer_arguments.
	(do_captured_read_memory_integer): Pass it to read_memory_integer.
	(read_memory_integer): Add BYTE_ORDER parameter.  Pass it to
	extract_signed_integer.
	(read_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it to
	extract_unsigned_integer.
	(write_memory_signed_integer): Add BYTE_ORDER parameter.  Pass it
	to store_signed_integer.
	(write_memory_unsigned_integer): Add BYTE_ORDER parameter.  Pass it
	to store_unsigned_integer.

	* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
	* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
	Pass it to extract_unsigned_integer.


	Update calls to extract_signed_integer, extract_unsigned_integer,
	extract_long_unsigned_integer, store_signed_integer,
	store_unsigned_integer, read_memory_integer,
	read_memory_unsigned_integer, safe_read_memory_integer,
	write_memory_signed_integer, write_memory_unsigned_integer, and
	get_target_memory_unsigned to pass byte order:
	* ada-lang.c (ada_value_binop): Update.
	* ada-valprint.c (char_at): Update.
	* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
	* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
	alpha_extract_return_value, alpha_read_insn,
	alpha_get_longjmp_target): Update.
	* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
	* amd64obsd-tdep.c (amd64obsd_supply_uthread,
	amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
	* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
	amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
	amd64_displaced_step_fixup): Update.
	* arm-linux-tdep.c (arm_linux_sigreturn_init,
	arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
	* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
	arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
	arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
	arm_return_value): Update.
	* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
	* auxv.c (default_auxv_parse): Update.
	* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
	avr_scan_prologue, avr_extract_return_value,
	avr_frame_prev_register, avr_push_dummy_call): Update.
	* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
	bsd_uthread_wait, bsd_uthread_thread_alive,
	bsd_uthread_extra_thread_info): Update.
	* c-lang.c (c_printstr, print_wchar): Update.
	* cp-valprint.c (cp_print_class_member): Update.
	* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
	cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
	cris_extract_return_value, find_step_target, dip_prefix,
	sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
	move_mem_to_reg_movem_op, get_data_from_address): Update.
	* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
	* dwarf2-frame.c (execute_cfa_program): Update.
	* dwarf2loc.c (find_location_expression): Update.
	* dwarf2read.c (dwarf2_const_value): Update.
	* expprint.c (print_subexp_standard): Update.
	* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
	unsigned_address_to_pointer, address_to_signed_pointer,
	read_var_value): Update.
	* frame.c (frame_unwind_register_signed,
	frame_unwind_register_unsigned, get_frame_memory_signed,
	get_frame_memory_unsigned): Update.
	* frame-unwind.c (frame_unwind_got_constant): Update.
	* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
	frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
	Update.
	* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
	frv_extract_return_value, find_func_descr,
	frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
	* f-valprint.c (f_val_print): Update.
	* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
	Update.
	* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
	h8300_push_dummy_call, h8300_extract_return_value,
	h8300h_extract_return_value, h8300_store_return_value,
	h8300h_store_return_value): Update.
	* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
	* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
	Update.
	* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
	hppa64_hpux_in_solib_call_trampoline,
	hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
	hppa_hpux_sigtramp_frame_unwind_cache,
	hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
	hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
	hppa32_hpux_search_dummy_call_sequence,
	hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
	hppa_hpux_unwind_adjust_stub): Update.
	* hppa-linux-tdep.c (insns_match_pattern,
	hppa_linux_find_global_pointer): Update.
	* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
	hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
	skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
	hppa_pseudo_register_read, hppa_frame_prev_register_helper,
	hppa_match_insns): Update.
	* hpux-thread.c (hpux_thread_fetch_registers): Update.
	* i386-tdep.c (i386bsd_sigcontext_addr): Update.
	* i386-cygwin-tdep.c (core_process_module_section): Update.
	* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
	amd64_darwin_sstep_at_sigreturn): Update.
	* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
	amd64_darwin_sigcontext_addr): Likewise.
	* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
	* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
	* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
	* i386obsd-nat.c (i386obsd_supply_pcb): Update.
	* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
	i386obsd_trapframe_cache): Update.
	* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
	i386_analyze_frame_setup, i386_analyze_prologue,
	i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
	i386_get_longjmp_target, i386_push_dummy_call,
	i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
	i386_fetch_pointer_argument): Update.
	* i387-tdep.c (i387_supply_fsave): Update.
	* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
	* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
	examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
	ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
	ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
	ia64_libunwind_frame_prev_register,
	ia64_libunwind_sigtramp_frame_this_id,
	ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
	find_extant_func_descr, find_func_descr,
	ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
	ia64_unwind_pc): Update.
	* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
	iq2000_scan_prologue, iq2000_extract_return_value,
	iq2000_push_dummy_call): Update.
	* irix5nat.c (fill_gregset): Update.
	* jv-lang.c (evaluate_subexp_java): Update.
	* jv-valprint.c (java_value_print): Update.
	* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, 
	lm32_extract_return_value, lm32_store_return_value): Update.
	* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
	m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
	m32c_m16c_pointer_to_address): Update.
	* m32r-tdep.c (m32r_store_return_value, decode_prologue,
	m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
	Update.
	* m68hc11-tdep.c (m68hc11_pseudo_register_read,
	m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
	m68hc11_push_dummy_call): Update.
	* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
	m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
	Update.
	* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
	m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
	m68k_get_longjmp_target): Update.
	* m88k-tdep.c (m88k_fetch_instruction): Update.
	* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
	mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
	* mi/mi-main.c (mi_cmd_data_write_memory): Update.
	* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
	mips64_linux_get_longjmp_target, mips64_fill_gregset,
	mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
	* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
	* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
	mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
	mips_o32_push_dummy_call, mips_o64_push_dummy_call, 
	mips_single_step_through_delay, mips_skip_pic_trampoline_code,
	mips_integer_to_address): Update.
	* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
	Update.
	* monitor.c (monitor_supply_register, monitor_write_memory,
	monitor_read_memory_single): Update.
	* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
	moxie_analyze_prologue): Update.
	* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
	mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
	mt_push_dummy_call): Update.
	* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
	read_objc_methlist_method, read_objc_object, read_objc_super,
	read_objc_class, find_implementation_from_class): Update.
	* ppc64-linux-tdep.c (ppc64_desc_entry_point,
	ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
	Update.
	* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
	ppcobsd_sigtramp_frame_cache): Update.
	* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
	do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
	ppc64_sysv_abi_return_value): Update.
	* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
	* procfs.c (procfs_auxv_parse): Update.
	* p-valprint.c (pascal_val_print): Update.
	* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
	regcache_raw_write_signed, regcache_raw_write_unsigned,
	regcache_cooked_read_signed, regcache_cooked_read_unsigned,
	regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
	* remote-m32r-sdi.c (m32r_fetch_register): Update.
	* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
	Update.
	* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
	rs6000_convert_from_func_ptr_addr, branch_dest, 
	rs6000_software_single_step): Update.
	* rs6000-tdep.c (rs6000_in_function_epilogue_p,
	ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
	bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
	rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
	rs6000_frame_cache): Update.
	* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
	s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
	s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
	extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
	* scm-exp.c (scm_lreadr): Update.
	* scm-lang.c (scm_get_field, scm_unpack): Update.
	* scm-valprint.c (scm_val_print): Update.
	* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
	score_fetch_inst): Update.
	* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
	sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
	sh64_pseudo_register_read, sh64_pseudo_register_write,
	sh64_frame_prev_register): Update:
	* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
	sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
	sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
	* solib-darwin.c (darwin_load_image_infos): Update.
	* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
	find_canonical_descriptor_in_load_object): Update.
	* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
	irix_open_symbol_file_object): Update.
	* solib-som.c (som_solib_create_inferior_hook, link_map_start,
	som_current_sos, som_open_symbol_file_object): Update.
	* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
	Update.
	* solib-svr4.c (read_program_header, scan_dyntag_auxv,
	solib_svr4_r_ldsomap): Update.
	* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
	* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
	sparc64obsd_collect_uthread): Update.
	* sparc64-tdep.c (sparc64_pseudo_register_read,
	sparc64_pseudo_register_write, sparc64_supply_gregset,
	sparc64_collect_gregset): Update.
	* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
	* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
	sparc32obsd_collect_uthread): Update.
	* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
	sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
	sparc_collect_rwindow): Update.
	* spu-linux-nat.c (parse_spufs_run): Update.
	* spu-tdep.c (spu_pseudo_register_read_spu,
	spu_pseudo_register_write_spu, spu_pointer_to_address,
	spu_analyze_prologue, spu_in_function_epilogue_p,
	spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
	spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
	info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
	info_spu_dma_command, info_spu_proxydma_command): Update.
	* stack.c (print_frame_nameless_args, frame_info): Update.
	* symfile.c (read_target_long_array, simple_read_overlay_table,
	simple_read_overlay_region_table): Update.
	* target.c (debug_print_register): Update.
	* tramp-frame.c (tramp_frame_start): Update.
	* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
	v850_extract_return_value, v850_store_return_value, 
	* valarith.c (value_binop, value_bit_index): Update.
	* valops.c (value_cast): Update.
	* valprint.c (val_print_type_code_int, val_print_string,
	read_string): Update.
	* value.c (unpack_long, unpack_double, unpack_field_as_long,
	modify_field, pack_long): Update.
	* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
	vax_skip_prologue): Update.
	* xstormy16-tdep.c (xstormy16_push_dummy_call,
	xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
	xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
	xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
	* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
	xtensa_pseudo_register_write, xtensa_frame_cache,
	xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.


	* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
	decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
	BYTE_ORDER parameter.
	(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
	parameters.
	(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
	(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
	* dfp.c (match_endianness): Add BYTE_ORDER parameter.  Use it
	instead of current_gdbarch.
	(decimal_to_string, decimal_from_integral, decimal_from_floating,
	decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
	Pass it to match_endianness.
	(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
	parameters.  Pass them to match_endianness.
	(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
	Pass them to match_endianness.
	(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
	Pass them to match_endianness.
	* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
	BYTE_ORDER_Y output parameters.
	(value_binop): Update call to value_args_as_decimal.

	Update calls to decimal_to_string, decimal_from_string,
	decimal_from_integral, decimal_from_floating, decimal_to_doublest,
	decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
	to pass/receive byte order:
	* c-exp.y (parse_number): Update.
	* printcmd.c (printf_command): Update.
	* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
	value_equal, value_less): Update.
	* valops.c (value_cast, value_one): Update.
	* valprint.c (print_decimal_floating): Update.
	* value.c (unpack_long, unpack_double): Update.
	* python/python-value.c (valpy_nonzero): Update.


	* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
	(printstr): Update calls to char_at.
	(ada_val_print_array): Likewise.
	* valprint.c (read_string): Add BYTE_ORDER parameter.
	(val_print_string): Update call to read_string.
	* c-lang.c (c_get_string): Likewise.
	* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
	* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
	Use it instead of current_gdbarch.
	* printcmd.c (printf_command): Update calls to target_wide_charset.
	* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
	Pass to target_wide_charset.  Use it instead of current_gdbarch.
	(classify_type): Add BYTE_ORDER parameter.  Pass to
	charset_for_string_type.  Allow NULL encoding pointer.
	(print_wchar): Add BYTE_ORDER parameter.
	(c_emit_char): Update calls to classify_type and print_wchar.
	(c_printchar, c_printstr): Likewise.


	* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
	* gdbarch.c, gdbarch.h: Regenerate.
	* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
	parameter.
	* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
	* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
	(rs6000_skip_trampoline_code): Update call.

	* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
	dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
	(alpha_read_insn): Add GDBARCH parameter.
	* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
	(alpha_register_to_value): Pass architecture to alpha_sts.
	(alpha_extract_return_value): Likewise.
	(alpha_value_to_register): Pass architecture to alpha_lds.
	(alpha_store_return_value): Likewise.
	(alpha_read_insn): Add GDBARCH parameter.
	(alpha_skip_prologue): Pass architecture to alpha_read_insn.
	(alpha_heuristic_proc_start): Likewise.
	(alpha_heuristic_frame_unwind_cache): Likewise.
	(alpha_next_pc): Likewise.
	(alpha_sigtramp_frame_this_id): Pass architecture to
	tdep->dynamic_sigtramp_offset callback.
	(alpha_sigtramp_frame_sniffer): Pass architecture to
	tdep->pc_in_sigtramp callback.
	* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
	(alphafbsd_sigtramp_offset): Likewise.
	* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
	parameter.  Pass to alpha_read_insn.
	(alpha_linux_sigtramp_offset): Add GDBARCH parameter.  Pass to
	alpha_linux_sigtramp_offset_1.
	(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alpha_linux_sigtramp_offset.
	(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
	and alpha_linux_sigtramp_offset.
	* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
	(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alphanbsd_sigtramp_offset.
	* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
	(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter.  Pass to
	alpha_read_insn.
	(alphaobsd_sigcontext_addr): Pass architecture to
	alphaobsd_sigtramp_offset.
	* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
	parameter.

	* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
	(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
	(amd64_frame_cache): Likewise.

	* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
	(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
	thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
	* arm-wince-tdep.c: Include "frame.h".

	* avr-tdep.c (EXTRACT_INSN): Remove.
	(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
	(avr_skip_prologue): Pass architecture to avr_scan_prologue.
	(avr_frame_unwind_cache): Likewise.

	* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
	(find_step_target): Initialize it.
	(get_data_from_address): Add BYTE_ORDER parameter.
	(bdap_prefix): Pass byte order to get_data_from_address.
	(handle_prefix_assign_mode_for_aritm_op): Likewise.
	(three_operand_add_sub_cmp_and_or_op): Likewise.
	(handle_inc_and_index_mode_for_aritm_op): Likewise.

	* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
	(frv_linux_sigcontext_reg_addr): Pass architecture to
	frv_linux_pc_in_sigtramp.
	(frv_linux_sigtramp_frame_sniffer): Likewise.

	* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
	(h8300_analyze_prologue): Add GDBARCH parameter.  Pass to
	h8300_is_argument_spill.
	(h8300_frame_cache, h8300_skip_prologue): Pass architecture
	to h8300_analyze_prologue.

	* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
	in_solib_call_trampoline callback.
	(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
	* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
	parameter.
	(hppa64_push_dummy_call): Pass architecture to
	hppa64_convert_code_addr_to_fptr.
	(hppa_match_insns): Add GDBARCH parameter.
	(hppa_match_insns_relaxed): Add GDBARCH parameter.  Pass to
	hppa_match_insns.
	(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
	(hppa_in_solib_call_trampoline): Add GDBARCH parameter.  Pass to
	hppa_match_insns_relaxed.
	(hppa_stub_unwind_sniffer): Pass architecture to
	tdep->in_solib_call_trampoline callback.
	* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
	(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
	hppa_hpux_search_pattern.
	* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
	(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
	Pass to insns_match_pattern.
	(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
	hppa_linux_sigtramp_find_sigcontext.
	(hppa_linux_sigtramp_frame_sniffer): Likewise.
	(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
	(hppa64_hpux_in_solib_call_trampoline): Likewise.

	* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
	(i386_analyze_frame_setup): Add GDBARCH parameter.
	(i386_analyze_prologue): Add GDBARCH parameter.  Pass to
	i386_follow_jump and i386_analyze_frame_setup.
	(i386_skip_prologue): Pass architecture to i386_analyze_prologue
	and i386_follow_jump.
	(i386_frame_cache): Pass architecture to i386_analyze_prologue.
	(i386_pe_skip_trampoline_code): Add FRAME parameter.
	* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
	* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
	frame to i386_pe_skip_trampoline_code.

	* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
	to sigcontext_register_address callback.
	* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
	(ia64_find_unwind_table): Pass architecture to
	ia64_find_global_pointer.
	(find_extant_func_descr): Add GDBARCH parameter.
	(find_func_descr): Pass architecture to find_extant_func_descr
	and ia64_find_global_pointer.
	(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
	tdep->sigcontext_register_address callback.
	* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
	GDBARCH parameter.

	* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
	(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.

	* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
	(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
	lm32_analyze_prologue.

	* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
	(m32r_skip_prologue): Pass architecture to decode_prologue.

	* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
	(m68hc11_scan_prologue): Pass architecture to
	m68hc11_analyze_instruction.

	* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
	(m68k_analyze_prologue): Pass architecture to
	m68k_analyze_frame_setup.

	* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
	(m88k_analyze_prologue): Add GDBARCH parameter.  Pass byte order
	to m88k_fetch_instruction.
	(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
	(m88k_frame_cache): Likewise.

	* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
	(mep_analyze_prologue): Pass architecture to mep_get_insn.

	* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
	(mips32_next_pc): Pass architecture to mips_fetch_instruction.
	(deal_with_atomic_sequence): Likewise.
	(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
	(mips16_scan_prologue): Likewise.
	(mips32_scan_prologue): Likewise.
	(mips16_in_function_epilogue_p): Likewise.
	(mips32_in_function_epilogue_p): Likewise.
	(mips_about_to_return): Likewise.
	(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
	(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
	(mips_skip_prologue): Pass architecture to mips16_scan_prologue
	and mips32_scan_prologue.
	(mips_in_function_epilogue_p): Pass architecture to
	mips16_in_function_epilogue_p and
	mips32_in_function_epilogue_p.
	(heuristic_proc_start): Pass architecture to mips_fetch_instruction
	and mips_about_to_return.
	(mips_skip_mips16_trampoline_code): Pass architecture to
	mips_fetch_instruction.
	(fetch_mips_16): Add GDBARCH parameter.
	(mips16_next_pc): Pass architecture to fetch_mips_16.
	(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
	fetch_mips_16.

	* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
	read_objc_methlist_method, read_objc_object, read_objc_super,
	read_objc_class): Add GDBARCH parameter.
	(find_implementation_from_class): Add GDBARCH parameter, pass
	to read_objc_class, read_objc_methlist_nmethods, and
	read_objc_methlist_method.
	(find_implementation): Add GDBARCH parameter, pass to
	read_objc_object and find_implementation_from_class.
	(resolve_msgsend, resolve_msgsend_stret): Pass architecture
	to find_implementation.
	(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
	architecture to read_objc_super and find_implementation_from_class.

	* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
	(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
	ppc64_standard_linkage3_target): Pass architecture to
	ppc64_desc_entry_point.
	* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
	(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
	(rs6000_fetch_instruction): Add GDBARCH parameter.
	(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
	rs6000_fetch_instruction.
	(skip_prologue): Pass architecture to rs6000_fetch_instruction.
	
	* remote-mips.c (mips_store_word): Return old_contents as host
	integer value instead of target bytes.

	* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
	(s390_analyze_prologue): Initialize it.
	(extend_simple_arg): Add GDBARCH parameter.
	(s390_push_dummy_call): Pass architecture to extend_simple_arg.

	* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
	* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
	(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
	* scm-valprint.c (scm_scmval_print): Likewise.
	(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
	SCM_BYTE_ORDER.

	* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
	(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
	look_for_args_moves.
	(sh64_skip_prologue): Pass architecture to
	sh64_skip_prologue_hard_way.
	* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
	(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
	(sh_frame_cache): Likewise.

	* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
	(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
	Pass architecture to extract_mips_address.

	* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
	* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
	(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
	to sparc_fetch_wcookie.
	(sparc32_frame_prev_register): Likewise.
	* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
	* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
	* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.

	* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
	(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
	(spu_virtual_frame_pointer): Likewise.
	(spu_frame_unwind_cache): Likewise.
	(info_spu_mailbox_list): Add BYTE_ORER parameter.
	(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
	(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
	(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
	to info_spu_dma_cmdlist.

	* symfile.c (read_target_long_array): Add GDBARCH parameter.
	(simple_read_overlay_table, simple_read_overlay_region_table,
	simple_overlay_update_1): Pass architecture to read_target_long_array.

	* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
	(v850_frame_cache): Pass architecture to v850_analyze_prologue.

	* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
	parameter.
	(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
	to xstormy16_analyze_prologue.
	(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
	(xstormy16_find_jmp_table_entry): Likewise.
	(xstormy16_skip_trampoline_code): Pass architecture to
	xstormy16_resolve_jmp_table_entry.
	(xstormy16_pointer_to_address): Likewise.
	(xstormy16_address_to_pointer): Pass architecture to
	xstormy16_find_jmp_table_entry.

	* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
	(call0_analyze_prologue): Add GDBARCH parameter, pass to
	call0_track_op.
	(call0_frame_cache): Pass architecture to call0_analyze_prologue.
	(xtensa_skip_prologue): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* defs.h (strlen_paddr, paddr, paddr_nz): Remove.
	(paddress): Add GDBARCH parameter.
	* utils.c (strlen_paddr, paddr, paddr_nz): Remove.
	(paddress): Add GDBARCH parameter, use it instead of current_gdbarch.
	* ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter.
	* ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter,
	use it instead of current_gdbarch.

	Update calls to ui_out_field_core_addr to pass architecture:
	* ada-lang.c (print_one_exception): Update.
	* breakpoint.c (print_one_breakpoint_location,
	print_one_exception_catchpoint): Update.
	* disasm.c (dump_insns): Update.
	* darwin-nat-info.c (darwin_debug_regions_recurse): Update.
	* mi/mi-main.c (mi_cmd_data_read_memory): Update.
	* mi/mi-symbol-cmds.c: Include "objfiles.h".
	(mi_cmd_symbol_list_lines): Update.
	* stack.c (print_frame_info, print_frame): Update.

	Update callers of paddress to pass architecture:
	* ada-tasks.c (info_task): Update.
	* ada-valprint.c (ada_val_print_1): Update.
	* annotate.c (annotate_source, annotate_frame_begin): Update.
	* breakpoint.c (insert_bp_location, describe_other_breakpoints,
	mention): Update.
	* cli/cli-cmds.c (edit_command, list_command, print_disassembly):
	Update.
	* corefile.c (memory_error): Update.
	* c-valprint.c (print_function_pointer_address, c_val_print): Update.
	* disasm.c (dis_asm_print_address): Update.
	* exec.c (print_section_info): Update.
	* f-valprint.c (f_val_print): Update.
	* infcmd.c: Include "arch-utils.h".
	(jump_command, program_info): Update.
	* linux-fork.c: Include "arch-utils.h".
	(info_forks_command): Update.
	* m2-valprint.c (print_function_pointer_address,
	print_unpacked_pointer, print_variable_at_address,
	m2_val_print): Update.
	* m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command):
	Update.
	* printcmd.c (print_address, print_address_demangle, address_info):
	Update.
	* p-valprint.c (pascal_val_print): Update.
	* source.c: Include "arch-utils.h".
	(line_info): Update.
	* stack.c (frame_info, print_block_frame_labels): Update.
	* symfile.c (add_symbol_file_command, list_overlays_command): Update.
	* symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1,
	print_symbol, print_partial_symbols, maintenance_info_psymtabs,
	maintenance_check_symtabs): Update.
	* symtab.c (find_pc_sect_symtab): Update.
	* target.c (deprecated_debug_xfer_memory): Update.
	* tracepoint.c (scope_info): Update.
	* tui/tui-stack.c (tui_make_status_line): Update.
	* valprint.c (val_print_string): Update.

	Update callers of paddr_nz to use paddress instead (keeping
	user-visible output identical):
	* alpha-tdep.c (alpha_heuristic_proc_start): Update.
	* amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn,
	amd64_displaced_step_fixup): Update.
	* arch-utils.c (simple_displaced_step_copy_insn): Update.
	* auxv.c (fprint_target_auxv): Update.
	* breakpoint.c (insert_single_step_breakpoint): Update.
	* buildsym.c (finish_block): Update.
	* cli/cli-dump.c (restore_section_callback): Update.
	* fbsd-nat.c (fbsd_find_memory_regions): Update.
	* frame.c (frame_unwind_register_value): Update.
	* gcore.c (gcore_create_callback): Update.
	* hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update.
	* i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm,
	i386_record_lea_modrm_addr, i386_record_lea_modrm,
	i386_process_record): Update.
	* ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id,
	ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id,
	ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update.
	* infrun.c (displaced_step_prepare, displaced_step_fixup,
	handle_inferior_event, insert_step_resume_breakpoint_at_sal,
	insert_longjmp_resume_breakpoint): Update.
	* linux-nat.c (linux_nat_find_memory_regions): Update.
	* linux-record.c (record_linux_system_call): Update.
	* mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call,
	mips_n32n64_push_dummy_call, mips_o32_push_dummy_call,
	mips_o64_push_dummy_call): Update.
	* monitor.c (monitor_error, monitor_remove_breakpoint): Update.
	* record.c (record_arch_list_add_mem, record_wait,
	record_xfer_partial): Update.
	* remote-mips.c (mips_fetch_word, mips_check_lsi_error,
	mips_common_breakpoint): Update.
	* remote-sim.c (gdbsim_xfer_inferior_memory): Update.
	* rs6000-tdep.c (ppc_displaced_step_fixup): Update.
	* solib-som.c (som_current_sos): Update.
	* symfile.c (load_progress, generic_load): Update.
	* symfile-mem.c (add_vsyscall_page): Update.
	* valops.c (value_fetch_lazy): Update.
	* windows-tdep.c (windows_xfer_shared_library): Update.

	Update callers of paddr_nz to use paddress instead (changing
	user-visible output to make it more correct):
	* dwarf2loc.c (locexpr_describe_location): Update.
	* ia64-tdep.c (ia64_memory_insert_breakpoint,
	ia64_memory_remove_breakpoint): Update.
	* jv-valprint.c (java_value_print): Update.
	* m32c-tdep.c (m32c_m16c_address_to_pointer): Update.
	* monitor.c (monitor_read_memory): Update.

	Update callers of paddr to use paddress instead (changing
	user-visible output to make it more correct):
	* arm-tdep.c (arm_push_dummy_call): Update.
	* breakpoint.c (insert_bp_location, create_thread_event_breakpoint,
	create_breakpoint): Update.
	* darwin-nat-info.c (darwin_debug_regions): Update.
	* dcache.c (dcache_info): Update.
	* dsrec.c (load_srec, make_srec): Update.
	* dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program,
	dwarf2_frame_cache): Update.
	* gcore.c (gcore_copy_callback): Update.
	* gnu-nat.c (gnu_xfer_memory): Update.
	* mips-linux-nat.c (mips_show_dr): Update.
	* monitor.c (monitor_write_memory, monitor_insert_breakpoint,
	monitor_remove_breakpoint): Update.
	* remote.c (compare_sections_command): Update.
	* remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint,
	m32r_remove_breakpoint, m32r_insert_watchpoint,
	m32r_remove_watchpoint): Update.
	* sol-thread.c (info_cb): Update.
	* symfile.c (load_progress): Update.

	Update callers of paddress or paddr_nz to use hex_string instead
	(changes output of internal/error/debug messages only):
	* dwarf2read.c (dump_die_shallow): Update.
	* frame.c (fprint_field, fprint_frame, frame_pc_unwind,
	get_frame_func, create_new_frame): Update.
	* hppa-tdep.c (find_unwind_entry, unwind_command): Update.
	* ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x,
	ia64_get_dyn_info_list): Update.
	* maint.c (maintenance_translate_address): Update.
	* mi/mi-cmd-var.c (mi_cmd_var_create): Update.
	* target.c (target_flash_erase): Update.

	Update callers of paddr/paddr_nz to use phex/phex_nz instead,
	using an appropriate address size.  Remove use of strlen_paddr.
	* exec.c (exec_files_info): Update.
	* i386-nat.c (i386_show_dr): Update.
	* remote.c (remote_flash_erase): Update.
	* m32r-rom.c (m32r_load_section): Update.
	* monitor.c (monitor_vsprintf, monitor_store_register): Update.
	* remote.c (remote_check_symbols, remote_search_memory): Update.
	* remote-mips.c (mips_request, mips_common_breakpoint): Update.
	* scm-valprint.c (scm_ipruk, scm_scmval_print): Update.
	* sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update.
	* sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs,
	sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs,
	sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs,
	sh_dsp_show_regs): Update.
	* xcoffsolib.c (sharedlibrary_command): Update.


	* maint.c (maint_print_section_info): Add ADDR_SIZE parameter.
	Use hex_string_custom instead of paddr.
	(print_bfd_section_info): Pass address size.
	(print_objfile_section_info): Likewise.

	* annotate.h (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* annotate.c (annotate_source): Add GDBARCH parameter.
	(annotate_frame_begin): Likewise.
	* source.c (identify_source_line): Update call to annotate_source.
	* stack.c (print_frame_info, print_frame): Update call to
	annotate_frame_begin.

	* breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter.
	(create_breakpoint, create_ada_exception_breakpoint): Update call.

	* stack.c (print_block_frame_labels): Add GDBARCH parameter.
	(print_frame_label_vars): Update call.

	* symmisc.c (print_partial_symbols): Add GDBARCH parameter.
	(dump_psymtab): Update call to print_partial_symbols.
	(struct print_symbol_args): Add GDBARCH member.
	(dump_symtab_1): Set print_symbol_args architecture member.
	(print_symbol): Use it.

	* windows-tdep.h (windows_xfer_shared_library): Add GDBARCH
	parameter.
	* windows-tdep.c (windows_xfer_shared_library): Likewise.
	* i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member.
	(core_process_module_section): Pass architecture from cpms_data to
	windows_xfer_shared_library.
	(windows_core_xfer_shared_libraries): Initialize cmps_data 
	architecture member.
	* windows-nat.c (windows_xfer_shared_libraries): Pass architecture
	to windows_xfer_shared_library.

	* defs.h (print_address): Add GDBARCH parameter.
	* printcmd.c (print_address): Add GDBARCH parameter.
	(print_scalar_formatted, do_examine): Update call.
	* findcmd.c (find_command): Update call.
	* tracepoint.c: Include "arch-utils.h".
	(trace_find_line_command): Update call.
	* tui/tui-disasm.c (tui_disassemble): Update call.

	* value.h (print_address_demangle): Add GDBARCH parameter.
	* printcmd.c (print_address_demangle): Add GDBARCH parameter.
	* c-valprint.c (print_function_pointer_address, c_val_print):
	Update call.
	* f-valprint.c (f_val_print): Update call.
	* gnu-v3-abi.c (gnuv3_print_method_ptr): Update call.
	* jv-valprint.c (java_val_print): Update call.
	* m2-valprint.c (print_function_pointer_address, m2_val_print):
	Update call.
	* p-valprint.c (pascal_val_print): Update call.

	* disasm.c (gdb_disassemble_info): Install architecture into
	di.application_data field.

2009-07-02  Ulrich Weigand  <[email protected]>

	* disasm.h (gdb_disassembly): Add GDBARCH parameter.
	(gdb_print_insn): Likewise.
	* disasm.c (dump_insns): Add GDBARCH parameter.  Use it instead
	of current_gdbarch.
	(do_mixed_source_and_assembly): Add GDBARCH parameter.  Pass to
	dump_insns.
	(do_assembly_only): Likewise.
	(gdb_disassembly): Add GDBARCH parameter.  Use it instead of
	current_gdbarch.  Pass to subroutines.
	(gdb_print_insn): Add GDBARCH parameter.  Use it instead of
	current_gdbarch.

	* stack.c (struct gdb_disassembly_stub_args): Add GDBARCH member.
	(gdb_disassembly_stub): Pass architecture to gdb_disassembly.
	(do_gdb_disassembly): Add GDBARCH argument.  Store into args.
	(print_frame_info): Pass architecture to do_gdb_disassembly.

	* printcmd.c (print_formatted): Pass architecture to gdb_print_insn.

	* mi/mi-cmd-disas.c: Include "arch-utils.h"
	(mi_cmd_disassemble): Pass architecture to gdb_disassembly.

	* cli/cli-cmds.c: Include "arch-utils.h".
	(print_disassembly): Add GDBARCH parameter.  Pass to gdb_disassembly
	and tui_show_assembly.
	(disassemble_current_function): Pass architecture to
	tui_get_low_disassembly_address and print_disassembly.
	(disassemble_command): Pass architecture to
	tui_get_low_disassembly_address and print_disassembly.

	* tui/tui.c (tui_show_assembly): Add GDBARCH parameter.  Pass to
	tui_update_source_windows_with_addr.

	* tui/tui-data.h (struct tui_locator_element): Add GDBARCH member.
	(struct tui_source_info): Likewise.
	* tui/tui-data.c (tui_clear_win_detail): Clear source_info.gdbarch.

	* tui/tui-disasm.c (tui_disassemble): Add GDBARCH parameter.
	Pass to gdb_print_insn.
	(tui_find_disassembly_address): Add GDBARCH parameter.  Pass to
	tui_disassemble.
	(tui_set_disassem_content): Add GDBARCH parameter.  Install into
	source_info.gdbarch.  Pass to tui_disassemble.
	(tui_show_disassem): Add GDBARCH parameter.  Pass to 
	tui_update_source_window.
	(tui_show_disassem_and_update_source): Add GDBARCH parameter.  Pass to
	tui_show_disassem and tui_update_source_window.

	(tui_get_begin_asm_address): Return locator architecture in addition
	to locator PC value.

	(tui_get_low_disassembly_address): Add GDBARCH parameter.   Pass to
	tui_get_low_disassembly_address.

	(tui_vertical_disassem_scroll): Pass architecture to subroutines.

	* tui/tui-disasm.h (tui_set_disassem_content): Add GDBARCH parameter.
	(tui_show_disassem): Likewise.
	(tui_show_disassem_and_update_source): Likewise.
	(tui_get_begin_asm_address): Return architecture and PC value.

	* tui/tui.h (tui_get_low_disassembly_address): Add GDBARCH parameter.
	(tui_show_assembly): Add GDBARCH parameter.

	* tui/tui-layout.c (extract_display_start_addr): Return current window
	architecture in addition to current PC value.

	(tui_set_layout): Update calls to tui_get_low_disassembly_address and
	extract_display_start_addr.  Pass architecture to
	tui_update_source_windows_with_addr.

	* tui/tui-source.c: Include "objfiles.h".
	(tui_set_source_content): Initialize window architecture.
	(tui_show_symtab_source): Add GDBARCH parameter.  Pass to
	tui_update_source_window_as_is

	* tui/tui-source.h (tui_show_symtab_source): Add GDBARCH parameter.

	* tui/tui-stack.c (tui_set_locator_info): Add GDBARCH parameter.
	Install locator architecture.
	(tui_set_locator_filename): Update call.
	(tui_show_frame_info): Pass architecture to tui_set_locator_info
	and subroutines.

	* tui/tui-win.c (make_visible_with_new_height): Pass architecture
	to tui_update_source_window.

	* tui/tui-winsource.c: Include "objfiles.h".
	(tui_display_main): Update call to tui_get_begin_asm_address.
	Pass architecture to tui_update_source_windows_with_addr.
	(tui_update_source_window): Add GDBARCH parameter.  Pass to
	tui_update_source_window_as_is.
	(tui_update_source_window_as_is): Add GDBARCH parameter.
	Pass to tui_set_disassem_content.
	(tui_update_source_windows_with_addr): Add GDBARCH parameter.
	Pass to subroutines.
	(tui_update_source_windows_with_line): Pass objfile architecture
	to subroutines.
	(tui_horizontal_source_scroll): Pass architecture to 
	tui_update_source_window_as_is.
	
	* tui/tui-winsource.h (tui_update_source_window): Add GDBARCH
	parameter.
	(tui_update_source_window_as_is): Likewise.
	(tui_update_source_windows_with_addr): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* breakpoint.h (struct breakpoint): New member GDBARCH.
	* breakpoint.c: Include "arch-utils.h".
	(set_raw_breakpoint_without_location): Add GDBARCH parameter.
	Use it to set breakpoint architecture.
	(set_raw_breakpoint): Add GDBARCH parameter.
	(create_internal_breakpoint): Likewise.
	(create_catchpoint): Likewise.
	(create_fork_vfork_event_catchpoint): Likewise.
	(create_breakpoint): Likewise.
	(create_breakpoints): Likewise.
	(break_command_really): Likewise.
	(create_ada_exception_breakpoint): Likewise.
	Update local callers to pass architecture:
	(create_internal_breakpoint): Update.
	(create_overlay_event_breakpoint): Update.
	(create_longjmp_master_breakpoint): Update.
	(create_thread_event_breakpoint): Update.
	(create_solib_event_breakpoint): Update.
	(create_catchpoint): Update.
	(create_fork_vfork_event_catchpoint): Update.
	(set_momentary_breakpoint): Update.
	(clone_momentary_breakpoint): Update.
	(create_breakpoint): Update.
	(create_breakpoints): Update.
	(break_command_really): Update.
	(break_command_1): Update.
	(set_breakpoint): Update.
	(watch_command_1): Update.
	(catch_fork_command_1): Update.
	(catch_exec_commnd_1): Update.
	(handle_gnu_v3_exceptions): Update.
	(create_ada_exception_breakpoint): Update.
	(catch_ada_exception_command): Update.
	(catch_assert_command): Update.
	(trace_command): Update.

	* breakpoint.h (struct bp_location): New member GDBARCH.
	* breakpoint.c (get_sal_arch): New function.
	(set_raw_breakpoint): Set location architecture.
	(add_location_to_breakpoint): Likewise.
	(clone_momentary_breakpoint): Likewise.
	(watch_command_1): Likewise.
	(update_watchpoint): Likewise.
	(bp_loc_is_permanent): Use location architecture instead of
	current_gdbarch.
	(adjust_breakpoint_address): Add GDBARCH parameter; use it
	instead of current_gdbarch.
	Update callers of adjust_breakpoint_address to pass
	breakpoint location architecture:
	(set_raw_breakpoint): Update.
	(watch_command_1): Update.

	* tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead
	of current_gdbarch.
	(add_local_symbols): Add GDBARCH parameter.  Pass to collect_symbol.
	(encode_actions): Pass tracepoint architecture to add_local_symbols
	(encode_actions): Use tracepoint architecture instead of
	current_gdbarch.  Pass it to add_local_symbols and collect_symbol.

	* breakpoint.h (struct breakpoint_ops): Replace last_addr parameter
	of print_one callback with last_loc.
	* breakpoint.c (print_one_breakpoint_location): Replace last_addr
	parameter with last_loc.
	(print_one_breakpoint): Likewise.
	(do_captured_breakpoint_query): Update call.
	(breakpoint_1): Pass last_loc instead of last_addr to
	print_one_breakpoint.  Pass last location architecture instead of
	current_gdbarch to set_next_address.
	Update all implementations of the print_one callback:
	* breakpoint.c (print_one_catch_fork): Update.
	(print_one_catch_vfork): Update.
	(print_one_catch_exec): Update.
	(print_one_exception_catchpoint): Update.
	* ada-lang.c (print_one_exception): Update.
	(print_one_catch_exception): Update.
	(print_one_catch_exception_unhandled): Update.
	(print_one_catch_assert): Update.

	* breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS
	parameter.  Use it instead of gdbarch_addr_bit (current_gdbarch).
	(print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it
	to print_one_breakpoint_location.
	(breakpoint_address_bits): New function.
	(do_captured_breakpoint_query): Compute number of address bits to print
	and pass it to print_one_breakpoint.
	(breakpoint_1): Likewise.  Use it instead of current_gdbarch.

	* breakpoint.h (create_thread_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_thread_event_breakpoint): Likewise.
	Update callers to create_thread_event_breakpoint:
	* aix-thread.c (pd_enable): Update.
	* linux-thread-db.c (enable_thread_event): Update.

	* breakpoint.h (create_solib_event_breakpoint): Add GDBARCH.
	* breakpoint.c (create_solib_event_breakpoint): Likewise.
	Update callers to create_solib_event_breakpoint:
	* solib-frv.c (enable_break, enable_break2): Update.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Update.
	* solib-som.c (som_solib_create_inferior_hook): Update.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Update.
	* solib-svr4.c (enable_break): Update.

	* breakpoint.h (insert_single_step_breakpoint): Add GDBARCH.
	* breakpoint.c (insert_single_step_breakpoint): Likewise.
	Update callers to insert_single_step_breakpoint:
	* alpha-tdep.c (alpha_software_single_step): Update.
	* arm-linux-tdep.c (arm_linux_software_single_step): Update.
	* arm-tdep.c (arm_software_single_step): Update.
	* cris-tdep.c (cris_software_single_step): Update.
	* rs6000-aix-tdep.c (rs6000_software_single_step): Update.
	* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update.
	* sparc-tdep.c (sparc_software_single_step): Update.
	* spu-tdep.c (spu_software_single_step): Update.
	* mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter.
	Pass it to insert_single_step_breakpoint.
	(mips_software_single_step): Pass architecture to
	deal_with_atomic_sequence and insert_single_step_breakpoint.

	* breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	* breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH.
	(deprecated_remove_raw_breakpoint): Likewise.
	Update callers to deprecated_insert_raw_breakpoint and
	deprecated_remove_raw_breakpoint:
	* breakpoint.c (single_step_gdbarch): New static variable.
	(insert_single_step_breakpoint): Pass GDBARCH parameter to
	deprecated_insert_raw_breakpoint.  Store it in single_step_gdbarch.
	(remove_single_step_breakpoints): Pass architecture stored in
	single_step_gdbarch to deprecated_remove_raw_breakpoint.
	* rs6000-nat.c (exec_one_dummy_insn): Update.
	* solib-irix.c (enable_break, disable_break): Update.
	* procfs.c (procfs_mourn_inferior): Update.
	(remove_dbx_link_breakpoint): Update.

	* breakpoint.h (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	* breakpoint.c (set_breakpoint): Add GDBARCH parameter.
	(set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise.
	Update callers to set_breakpoint, set_momentary_breakpoint and
	set_momentary_breakpoint_at_pc:
	* breakpoint.c (set_momentary_breakpoint_at_pc): Update.
	(until_break_command): Update.
	* infcall.c (call_function_by_hand): Update.
	* infcmd.c (finish_backward, finish_forward): Update.
	* infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH
	parameter.  Pass it to set_momentary_breakpoint.
	(insert_longjmp_resume_breakpoint): Add GDBARCH parameter.
	Pass it to set_momentary_breakpoint_at_pc.
	(handle_inferior_event): Update.
	(insert_step_resume_breakpoint_at_frame): Update.
	(insert_step_resume_breakpoint_at_caller): Update..
	* mi/mi-cmd-break.c: Include "arch-utils.h".
	(mi_cmd_break_insert): Update.

	* target.h (struct target_ops): Add GDBARCH parameter to
	to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint,
	and to_remove_hw_breakpoint members.
	(target_insert_breakpoint, target_remove_breakpoint,
	target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH
	parameter, pass to target routine.
	(memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH
	parameter.
	* target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint,
	debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add
	GDBARCH parameter, pass to target routine.
	(update_current_target): Update function signature.
	* breakpoint.c (insert_bp_location, remove_breakpoint,
	deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint):
	Pass architecture to target_ routines.
	Update all implementations of the target breakpoint routines to take
	GDBARCH parameter and use it instead of GDBARCH as appropriate:
	* corelow.c (ignore): Update.
	* exec.c (ignore): Update.
	* mem-break.c (memory_insert_breakpoint): Update.
	(memory_remove_breakpoint): Update.
	* monitor.c (monitor_insert_breakpoint): Update.
	(monitor_remove_breakpoint): Update.
	* record.c (record_insert_breakpoint): Update.
	(record_beneath_to_insert_breakpoint): Update.
	(record_remove_breakpoint): Update.
	(record_beneath_to_remove_breakpoint): Update.
	* remote.c (remote_insert_breakpoint): Update.
	(remote_remove_breakpoint): Update.
	(remote_insert_hw_breakpoint): Update.
	(remote_remove_hw_breakpoint): Update.
	* remote-m32r-sdi.c (m32r_insert_breakpoint): Update.
	(m32r_remove_breakpoint): Update.
	* remote-mips.c (mips_insert_breakpoint): Update.
	(mips_remove_breakpoint): Update.
	* i386-nat.c (i386_insert_hw_breakpoint): Update.
	(i386_remove_hw_breakpoint): Update.
	* nto-procfs.c (procfs_insert_breakpoint):  Update.
	(procfs_remove_breakpoint): Update.
	(procfs_insert_hw_breakpoint): Update.
	(procfs_remove_hw_breakpoint): Update.

2009-07-02  Ulrich Weigand  <[email protected]>

	* frame.h (frame_unwind_arch): New.
	(frame_unwind_caller_arch): Likewise.
	* frame-unwind.h (frame_prev_arch_ftype): New type.
	(struct frame_unwind): New member prev_arch.
	* frame.c (struct frame_info): New member prev_arch.
	(frame_unwind_arch): New function.
	(frame_unwind_caller_arch): Likewise..
	(get_frame_arch): Reimplement in terms of frame_unwind_arch.
	* sentinel-frame.c (sentinel_frame_prev_arch): New function.
	(sentinel_frame_unwinder): Install it.

	* frame.c (frame_pc_unwind): Use frame_unwind_arch instead
	of get_frame_arch.
	(frame_unwind_register_value): Likewise.
	(frame_unwind_register_signed): Likewise.
	(frame_unwind_register_unsigned): Likewise.
	* frame-unwind.c (frame_unwind_got_optimized): Likewise.
	(frame_unwind_got_register): Likewise.
	(frame_unwind_got_constant): Likewise.
	(frame_unwind_got_bytes): Likewise.
	(frame_unwind_got_address): Likewise.

	* frame.h (enum frame_type): New value ARCH_FRAME.
	* frame.c (fprint_frame_type): Handle ARCH_FRAME.
	* stack.c (print_frame_info): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* target.h (struct target_ops): New member to_thread_architecture.
	(target_thread_architecture): New macro.
	* target.c (update_current_target): Inherit to_thread_architecture.
	(default_thread_architecture): New function.
	(debug_to_thread_architecture): New function.
	(setup_target_debug): Handle to_thread_architecture.

	* regcache.h (get_thread_arch_regcache): New.
	* regcache.c (struct regcache_list): New data type.
	(current_regcache): Hold regcache list instead of single regcache.
	(current_thread_ptid, current_thread_arch): New static variables.
	(get_thread_arch_regcache): New function.
	(get_thread_regcache): Use it.  Call target_thread_architecture.
	(regcache_thread_ptid_changed): Update to current_regcache changes.
	(registers_changed): Likewise.  Reset current_thread_arch and
	current_thread_ptid.

	* remote.c (remote_wait): Access target registers in target_gdbarch.
	* linux-nat.c (linux_nat_do_thread_registers): Likewise.
	* proc-service.c (ps_lgetregs, ps_lsetregs): Likewise.
	(ps_lgetfpregs, ps_lsetfpregs): Likewise.
	* sol-thread.c (ps_lgetregs, ps_lsetregs): Likewise.
	(ps_lgetfpregs, ps_lsetfpregs): Likewise.
	* solib-svr4.c (enable_break): Likewise.
	(svr4_relocate_main_executable): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* python/python-internal.h (struct language_defn): Declare.
	(python_gdbarch, python_language): Likewise.
	(ensure_python_env): Add prototype.
	(make_cleanup_py_restore_gil): Remove prototype.

	* python/python.c: Include "arch-utils.h", "value.h" and "language.h".
	(python_gdbarch, python_language): New global variables.
	(struct python_env): New data type.
	(ensure_python_env, restore_python_env): New functions.
	(eval_python_from_control_command): Call ensure_python_env to
	install current architecture and language.
	(python_command, gdbpy_new_objfile): Likewise.
	* python/python-cmd.c: Include "arch-utils.h" and "language.h".
	(cmdpy_destroyer, cmdpy_function, cmdpy_completer): Call
	ensure_python_env.
	* python/python-type.c (clean_up_objfile_types): Likewise.
	* python/python-objfile.c: Include "language.h".
	(clean_up_objfile): Call ensure_python_env.
	* python/python-prettyprint.c (apply_val_pretty_printer): Likewise.
	(apply_varobj_pretty_printer): Do not call PyGILState_Ensure.
	* varobj.c (varobj_ensure_python_env): New helper function.
	(varobj_get_display_hint, update_dynamic_varobj_children,
	install_default_visualizer, varobj_set_visualizer, free_variable,
	value_get_print_value): Call it.
	(value_get_print_value): Add varobj argument instead of pretty
	printer argument.  Update all callers.

	* python/python-utils.c (py_gil_restore, make_cleanup_py_restore_gil):
	Remove.

	* value.h (internal_function_fn): Add GDBARCH and LANGUAGE argument.
	(call_internal_function): Likewise.
	* value.c (call_internal_function): Likewise.  Pass to handler.
	* eval.c (evaluate_subexp_standard): Update call.
	* python/python-function.c: Include "language.h".
	(fnpy_call): Add GDBARCH and LANGAUAGE arguments and call
	make_cleanup_python_env.

	* python/python-value.c (builtin_type_pyint, builtin_type_pyfloat,
	builtin_type_pylong, builtin_type_pybool, builtin_type_pychar,
	valpy_str): Use python_gdbarch and python_language instead of
	current_gdbarch and current_language.
	* python/python-type.c (typy_lookup_typename): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* arch-utils.c (selected_byte_order): Return target_byte_order_user.
	(show_endian): Use target_byte_order_user if specified; otherwise
	use get_current_arch () instead of current_gdbarch.
	(show_architecture): Use set_architecture_string if specified;
	otherwise use get_current_arch () instead of current_gdbarch.
	(get_current_arch): New function.
	* arch-utils.h (get_current_arch): Add prototype.

	* osabi.c (show_osabi): Use get_current_arch () instead of
	current_gdbarch.

	* findcmd.c: Include "arch-utils.h".
	(parse_find_args): Add BIG_P argument.  Use it instead of byte order
	of current_gdbarch.
	(find_command): Use get_current_arch () instead of current_gdbarch.
	Pass byte order to parse_find_args.

	* maint.c: Include "arch-utils.h".
	(maintenance_print_architecture): Use get_current_arch () instead
	of current_gdbarch.

	* reggroups.c: Include "arch-utils.h".
	(maintenance_print_reggroups): Use get_current_arch () instead
	of current_gdbarch.

	* symfile.c: Include "arch-utils.h".
	(overlay_load_command): Use get_current_arch () instead of
	current_gdbarch.

	* value.c: Include "arch-utils.h".
	(show_convenience): Use get_current_arch () instead of
	current_gdbarch.

	* tui/tui-regs.c: Include "arch-utils.h".
	(tui_reg_next_command): Use get_current_arch () instead of
	current_gdbarch.

	* mi/mi-main.c: Include "arch-utils.h".
	(mi_cmd_data_read_memory): Use get_current_arch () instead of
	current_gdbarch.

	* parse.c: Include "arch-utils.h".
	(parse_exp_in_context): Use get_current_arch () instead of
	current_gdbarch.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.c (make_pointer_type, make_reference_type,
	smash_to_memberptr_type, lookup_array_range_type, check_stub_method):
	Use type architecture instead of current_gdbarch.

	* gdbtypes.h (address_space_name_to_int, address_space_int_to_name):
	Add GDBARCH paramter.
	* gdbtypes.c (address_space_name_to_int, address_space_int_to_name):
	Add GDBARCH parameter.   Use it instead of current_gdbarch.
	* c-typeprint.c (c_type_print_modifier): Update call.
	* parse.c (push_type_address_space): Likewise.

	* findvar.c (extract_typed_address, store_typed_address): Use type
	architecture instead of current_gdbarch.

	* value.c (value_as_address, unpack_field_as_long): Use type architecture
	instead of current_gdbarch.

	* doublest.c (floatformat_from_length): Add GDBARCH argument.  Use it
	instead of current_gdbarch.
	(floatformat_from_type): Pass type architecture.

	* infcall.c (find_function_addr): Use type architecture instead
	of current_gdbarch.

	* valarith.c (value_bitstring_subscript, value_x_binop, value_neg,
	value_bit_index): Use type architecture instead of current_gdbarch.
	* valops.c (value_cast, value_slice): Likewise.

	* value.h (modify_field): Add TYPE argument.
	* value.c (modify_field): Add TYPE argument.  Use type architecture
	instead of current_gdbarch.
	(set_internalvar_component): Likewise.
	* eval.c (evaluate_struct_tuple): Update call.
	* valops.c (value_assign): Likewise.
	* ada-lang.c (modify_general_field): Likewise.  Add TYPE argument.
	(make_array_descriptor): Update calls.
	(move_bits): Add BITS_BIG_ENDIAN_P argument.  Use it instead of
	current_gdbarch.
	(ada_value_assign, value_assign_to_component): Update calls.
	(decode_packed_array, ada_value_primitive_packed_val, ada_value_assign,
	value_assign_to_component): Use type arch instead of current_gdbarch.

	* printcmd.c (float_type_from_length): Remove GDBARCH argument,
	use type architecture instead.
	(print_scalar_formatted, printf_command): Update calls.  Use type
	architecture instead of current_gdbarch.
	* valprint.c (val_print_type_code_int): Use type architecture
	instead of current_gdbarch.
	* varobj.c (value_get_print_value): Likewise.
	* python/python-prettyprint.c (print_string_repr): Add GDBARCH
	argument.  Use it instead of current_gdbarch.
	(apply_val_pretty_printer): Update call.

	* ada-valprint.c (ada_val_print_1): Use type architecture instead
	of current_gdbarch.
	* c-valprint.c (print_function_pointer_address): Add GDBARCH argument.
	Use it instead of current_gdbarch.
	(c_val_print): Update calls passing type architecture.
	* f-valprint.c (f_val_print): Use type architecture instead of
	current_gdbarch.
	* jv-valprint (java_value_print): Likewise.
	* m2-valprint.c (print_function_pointer_address): Add GDBARCH argument.
	Use it instead of current_gdbarch.
	(print_unpacked_pointer): Update calls passing type architecture.
	* scm-valprint.c (scm_scmval_print): Use type architecture instead of
	current_gdbarch.

	* gnu-v3-abi.c (get_class_arch): Remove.
	(gnuv3_rtti_type): Use get_type_arch instead of get_class_arch.  Remove
	special-case check for Java classes.
	(gnuv3_virtual_fn_field, gnuv3_baseclass_offset, gnuv3_print_method_ptr,
	gnuv3_method_ptr_size, gnuv3_make_method_ptr, gnuv3_method_ptr_to_value):
	Use get_type_arch instead of get_class_arch.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (TYPE_OBJFILE_OWNED, TYPE_OWNER): New macros.
	(TYPE_OBJFILE, TYPE_ALLOC, TYPE_ZALLOC): Reimplement.
	(alloc_type_arch): Add prototype.
	(alloc_type_copy): Likewise.
	(get_type_arch): Likewise.
	(arch_type): Likewise.
	(arch_integer_type): Likewise.
	(arch_character_type): Likewise.
	(arch_boolean_type): Likewise.
	(init_float_type): Remove, replace by ...
	(arch_float_type): ... this.
	(init_complex_type): Remove, replace by ...
	(arch_complex_type): ... this.
	(init_flags_type): Remove, replace by ...
	(arch_flags_type): ... this.
	(init_composite_type): Remove, replace by ...
	(arch_composite_type): ... this.

	* gdbtypes.c (alloc_type): No longer support NULL objfile.
	(init_type): Likewise.
	(alloc_type_arch): New function.
	(alloc_type_copy): New function.
	(get_type_arch): New function.

	(smash_type): Preserve type ownership information.
	(make_pointer_type, make_reference_type, make_function_type,
	smash_to_memberptr_type, smash_to_method_type): No longer
	preserve OBJFILE across smash_type calls.
	(make_pointer_type, make_reference_type, make_function_type,
	lookup_memberptr_type, lookup_methodptr_type, allocate_stub_method,
	create_range_type, create_array_type, create_set_type, copy_type):
	Use alloc_type_copy when allocating types.
	(check_typedef): Use alloc_type_arch.
	(copy_type_recursive): Likewise.  Preserve type ownership data
	after copying type.
	(recursive_dump_type): Dump type ownership data.
	(alloc_type_instance): Update type ownership check.
	(copy_type, copy_type_recursive): Likewise.

	(arch_type): New function.
	(arch_integer_type): Likewise.
	(arch_character_type): Likewise.
	(arch_boolean_type): Likewise.
	(init_float_type): Remove, replace by ...
	(arch_float_type): ... this.
	(init_complex_type): Remove, replace by ...
	(arch_complex_type): ... this.
	(init_flags_type): Remove, replace by ...
	(arch_flags_type): ... this.
	(append_flags_type_flag): Move down.
	(init_composite_type): Remove, replace by ...
	(arch_composite_type): ... this.
	(append_composite_type_field_aligned,
	append_composite_type_field): Move down.

	* gdbarch.c (gdbtypes_post_init): Allocate all types
	using per-architecture routines.
	* ada-lang.c (ada_language_arch_info): Likewise.
	* f-lang.c (build_fortran_types): Likewise.
	* jv-lang.c (build_java_types): Likewise.
	* m2-lang.c (build_m2_types): Likewise.
	* scm-lang.c (build_scm_types): Likewise.

	* ada-lang.c (ada_type_of_array): Use alloc_type_copy.
	(packed_array_type): Likewise.
	(ada_template_to_fixed_record_type_1): Likewise.
	(template_to_static_fixed_type): Likewise.
	(to_record_with_fixed_variant_part): Likewise.
	(to_fixed_variant_branch_type): Likewise.
	(to_fixed_array_type): Likewise.
	(to_fixed_range_type): Likewise.
	(empty_record): Use type instead of objfile argument.
	Use alloc_type_copy.
	(to_fixed_variant_branch_type): Update call to empty_record.
	* jv-lang.c (type_from_class): Use alloc_type_arch.

	* arm-tdep.c (arm_ext_type): Allocate per-architecture type.
	* i386-tdep.c (i386_eflags_type, i386_mxcsr_type, i387_ext_type,
	i386_mmx_type, i386_sse_type): Likewise.
	* ia64-tdep.c (ia64_ext_type): Likewise.
	* m32c-tdep.c (make_types): Likewise.
	* m68k-tdep.c (m68k_ps_type, m68881_ext_type): Likewise.
	* rs6000-tdep.c (rs6000_builtin_type_vec64,
	rs6000_builtin_type_vec128): Likewise.
	* sparc-tdep.c (sparc_psr_type, sparc_fsr_type): Likewise.
	* sparc64-tdep.c (sparc64_pstate_type, sparc64_fsr_type,
	sparc64_fprs_type): Likewise.
	* spu-tdep.c (spu_builtin_type_vec128): Likewise.
	* xtensa-tdep.c (xtensa_register_type): Likewise.
	* linux-tdep.c (linux_get_siginfo_type): Likewise.
	* target-descriptions.c (tdesc_gdb_type): Likewise.
	* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* i386-tdep.h (struct gdbarch_tdep): Add i386_eflags_type and
	i386_mxcsr_type members.
	(i386_eflags_type): Make into function.
	(i386_mxcsr_type): Likewise.
	* i386-tdep.c (i386_eflags_type): Make into function.
	(i386_mxcsr_type): Likewise.
	(i386_register_type): Update uses.
	(i386_init_types): Remove.
	(_initialize_i386_tdep): Do not call it.
	* amd64-tdep.c (amd64_register_type): Update uses.

	* m68k-tdep.h (struct gdbarch_tdep): Add m68k_ps_type member.
	* m68k-tdep.c (m68k_ps_type): Make into function.
	(m68k_register_type): Update use.
	(m68k_init_types): Remove.
	(_initialize_m68k_tdep): Do not call it.

	* sparc-tdep.h (struct gdbarch_tdep): Add sparc_psr_type,
	sparc_fsr_type, sparc64_pstate_type, sparc64_fsr_type, and
	sparc64_fprs_type members.
	* sparc-tdep.c (sparc_psr_type): Make into function.
	(sparc_fsr_type): Likewise.
	(sparc32_register_type): Update uses.
	(sparc_init_types): Remove.
	(_initialize_sparc_tdep): Do not call it.
	* sparc64-tdep.c (sparc64_pstate_type): Make into function.
	(sparc64_fsr_type): Likewise.
	(sparc64_fprs_type): Likewise.
	(sparc64_register_type): Update uses.
	(sparc64_init_types): Remove.
	(_initialize_sparc64_tdep): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (builtin_type_ieee_single, builtin_type_ieee_double,
	builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
	builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
	(init_float_type, init_complex_type): Add prototypes.
	* gdbtypes.c (builtin_type_ieee_single, builtin_type_ieee_double,
	builtin_type_i387_ext, builtin_type_m68881_ext, builtin_type_arm_ext,
	builtin_type_ia64_spill, builtin_type_ia64_quad): Remove.
	(_initialize_gdbtypes): Do not initialize them.
	(build_flt): Rename to ...
	(init_float_type): ... this.  Make global.
	(build_complex): Rename to ...
	(init_complex_type): ... this.  Make global.  Remove BIT argument.
	(gdbtypes_post_init): Update calls.

	* ada-lang.c (ada_language_arch_info): Use init_float_type.
	* jv-lang.c (build_java_types): Likewise.
	* m2-lang.c (build_m2_types): Likewise.
	* f-lang.c (build_fortran_types): Use init_float_type and
	init_complex_type.

	* target-descriptions.c (tdesc_gdb_type): Call init_float_type instead
	of using builtin_type_ieee_single, builtin_type_ieee_double, or
	builtin_type_arm_ext.

	* ia64-tdep.h (struct gdbarch_tdep): Add ia64_ext_type member.
	* ia64-tdep.c (builtin_type_ia64_ext): Remove.
	(_initialize_ia64_tdep): Do not initialize it.
	(floatformat_valid, floatformat_ia64_ext, floatformats_ia64_ext):
	Move up.
	(ia64_ext_type): New function.
	(ia64_register_reggroup_p, ia64_convert_register_p,
	ia64_register_to_value, ia64_value_to_register,
	ia64_extract_return_value, ia64_store_return_value): Use ia64_ext_type
	instead of builtin_type_ia64_ext.

	* i386-tdep.h (struct gdbarch_tdep): Add i387_ext_type member.
	(i387_ext_type): Add prototype.
	* i386-tdep.c (i387_ext_type): New function.
	(i386_extract_return_value, i386_store_return_value,
	i386_register_type): Use it instead of builtin_type_i387_ext.
	* amd64-tdep.c (amd64_register_type): Likewise.
	* i387-tdep.c (print_i387_value, i387_register_to_value,
	i387_value_to_register): Likewise.
	(print_i387_value, print_i387_ext): Add GDBARCH argument.
	(print_i387_ext, i387_print_float_info): Pass to subroutines.

	* m68k-tdep.h (struct gdbarch_tdep): Add m68881_ext_type member.
	* m68k-tdep.c (m68881_ext_type): New function.
	(m68k_register_type, m68k_convert_register_p): Use it instead
	of builtin_type_m68881_ext.

	* arm-tdep.h (struct gdbarch_tdep): Add arm_ext_type member.
	* arm-tdep.c (arm_ext_type): New function.
	(arm_register_type): Use it instead of builtin_type_arm_ext.

	* alpha-tdep.c (alpha_register_type): Use builtin types
	instead of builtin_type_ieee_double.

	* mips-tdep.c (mips_float_register_type, mips_double_register_type):
	Remove.
	(mips_register_type): Use builtin types instead of
	builtin_type_ieee_single and builtin_type_ieee_double.
	(mips_print_fp_register): Use builtin types instead of
	mips_float_register_type and mips_double_register_type.

	* hppa-tdep.c (hppa32_register_type, hppa64_register_type):
	Use builtin types instead of builtin_type_ieee_single and
	builtin_type_ieee_double.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
	builtin_type_int16, builtin_type_uint16, builtin_type_int32,
	builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
	builtin_type_int128, builtin_type_uint128): Remove.
	(struct builtin_type): New members builtin_int0, builtin_int8,
	builtin_uint8, builtin_int16, builtin_uint16, builtin_int32,
	builtin_uint32, builtin_int64, builtin_uint64, builtin_int128,
	and builtin_uint128.
	* gdbtypes.c (builtin_type_int0, builtin_type_int8, builtin_type_uint8,
	builtin_type_int16, builtin_type_uint16, builtin_type_int32,
	builtin_type_uint32, builtin_type_int64, builtin_type_uint64,
	builtin_type_int128, builtin_type_uint128): Remove.
	(_initialize_gdbtypes): Do not initialize them.
	(gdbtypes_post_init): Initialize fixed-size integer types.

	* dwarf2expr.c (unsigned_address_type, signed_address_type): Add
	GDBARCH argument.  Return platform-specific type.
	(dwarf2_read_address, execute_stack_op): Update calls.

	* target-descriptions.c (tdesc_gdb_type): Use platform-specific types
	instead of global builtin_int_... variables.
	* mi/mi-main.c (mi_cmd_data_read_memory): Likewise.
	* printcmd.c (do_examine): Likewise.
	* jv-exp.y (parse_number): Likewise.

	* alpha-tdep.c (alpha_register_type, alpha_push_dummy_call,
	alpha_store_return_value): Likewise.
	* amd64-linux-tdep.c (amd64_linux_register_type): Likewise.
	* amd64-tdep.c (amd64_register_type): Likewise.
	* arm-tdep.c (arm_register_type): Likewise.
	* avr-tdep.c (avr_register_type): Likewise.
	* cris-tdep.c (cris_register_type, crisv32_register_type): Likewise.
	* frv-tdep.c (frv_register_type): Likewise.
	* h8300-tdep.c h8300_register_type): Likewise.
	* hppa-tdep.c (hppa64_push_dummy_call, hppa32_register_type,
	hppa64_register_type): Likewise.
	* i386-tdep.c (i386_mmx_type, i386_sse_type): Likewise.
	* iq2000-tdep.c (iq2000_register_type): Likewise.
	* lm32-tdep.c (lm32_register_type, lm32_push_dummy_call): Likewise.
	* m32r-tdep.c (m32r_register_type): Likewise.
	* m68hc11-tdep.c (m68hc11_register_type, m68hc11_pseudo_register_read,
	m68hc11_pseudo_register_write): Likewise.
	* m68k-tdep.c (m68k_register_type): Likewise.
	* m88k-tdep.c (m88k_register_type, m88k_store_arguments): Likewise.
	* mep-tdep.c (mep_register_type): Likewise.
	* mips-tdep.c (mips_register_type, mips_pseudo_register_type,
	mips_print_fp_register): Likewise.
	* moxie-tdep.c (moxie_register_type): Likewise.
	* mt-tdep.c (mt_copro_register_type, mt_register_type): Likewise.
	* rs6000-tdep.c (rs6000_builtin_type_vec64,
	rs6000_builtin_type_vec128): Likewise.
	* score-tdep.c (score_register_type): Likewise.
	* sparc-tdep.c (sparc32_register_type, sparc32_store_arguments):
	Likewise.
	* sparc64-tdep.c (sparc64_register_type, sparc64_store_arguments):
	Likewise.
	* spu-tdep.c (spu_builtin_type_vec128, spu_register_type): Likewise.
	* v850-tdep.c (v850_register_type): Likewise.
	* xstormy16-tdep.c (xstormy16_register_type): Likewise.
	* xtensa-tdep.c (xtensa_register_type): Likewise.

	* mt-tdep.c (struct gdbarch_tdep): New data structure.
	(mt_gdbarch_init): Alloc TDEP structures.
	(mt_register_type): Cache coprocessor type in TDEP instead of
	static global variable.

	* xtensa-tdep.h (struct gdbarch_tdep): Add type_entries member.
	* xtensa-tdep.c (type_entries): Remove.
	(xtensa_register_type): Cache fixed-size types in TDEP instead
	of in global variable.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (builtin_type_true_char): Remove.
	(builtin_type_true_unsigned_char): Likewise.
	(struct builtin_type): Add builtin_true_char and
	builtin_true_unsigned_char members.
	* gdbtypes.c (builtin_type_true_char): Remove.
	(builtin_type_true_unsigned_char): Likewise.
	(_initialize_gdbtypes): Do not initialize them.
	(gdbtypes_post_init): Initialize builtin_true_char and
	builtin_true_unsigned_char members of builtin_type.

	* printcmd.c (print_scalar_formatted): Use builtin_type
	members instead of builtin_type_true_char and
	builtin_type_true_unsigned_char.
	* ada-valprint.c (ada_val_print_1): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (builtin_type_void): Remove.
	* gdbtypes.c (builtin_type_void): Remove.
	(_initialize_gdbtypes): Do not initialize it.

	(safe_parse_type): Add GDBARCH argument.  Use it to construct
	void return type.
	(check_stub_method): Update call.

	* infcall.c (call_function_by_hand): Use platform-specific type
	instead of builtin_type_void.
	* valops.c (value_cast): Use input void type instead of
	builtin_type_void.

2009-07-02  Ulrich Weigand  <[email protected]>

	* ada-lang.c (assign_component): Use platform-specific integer type
	instead of builtin_type_int32 type.
	(ada_evaluate_subexp) [OP_ATR_SIZE]: Likewise.

	* ax-gdb.c (gen_expr) [UNOP_NEG]: Use platform-specific integer type
	instead of builtin_type_int8 type.
	* valarith.c (value_x_unop): Likewise.
	* python/python-value.c (valpy_absolute): Avoid reference to
	builtin_type_int8 type.

	* eval.c (evaluate_subexp_standard): Use platform-specific integer
	type instead of builtin_type_int8 as EVAL_SKIP return value type.
	* ada-lang.c (ada_evaluate_subexp): Likewise.
	* jv-lang.c (evaluate_subexp_java): Likewise.
	* m2-lang.c (evaluate_subexp_modula2): Likewise.
	* scm-lang.c (evaluate_exp): Likewise.

	* value.h (value_bitstring): Add INDEX_TYPE argument.
	* valops.c (value_bitstring): Add INDEX_TYPE argument, use it instead
	of builtin_type_int32 as base range type.
	* eval.c (evaluate_subexp_standard): Update value_bitstring call.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.c (lookup_array_range_type): Add prototype.
	(lookup_string_range_type): Likewise.
	* gdbtypes.c (lookup_array_range_type): New function.
	(lookup_string_range_type): Likewise.

	* ax-gdb.c (gen_repeat): Use lookup_array_range_type.
	* parse.c (follow_types): Likewise.
	* jv-lang.c (java_array_type): Likewise.
	* gnu-v3-abi.c (build_gdb_vtable_type): Likewise.
	* mt-tdep.c (mt_register_type): Likewise.
	* sh-tdep.c (sh_sh4_build_float_register_type): Likewise.
	* sh64-tdep.c (sh64_build_float_register_type): Likewise.
	* value.c (allocate_repeat_value): Likewise.
	* valops.c (value_array, value_cstring): Likewise.
	* valops.c (value_string): Use lookup_string_range_type.

2009-07-02  Ulrich Weigand  <[email protected]>

	* m2-typeprint.c (m2_print_bounds, m2_is_long_set_of_type): Remove
	redundant check for NULL TYPE_TARGET_TYPE.
	* m2-valprint.c (m2_print_long_set): Likewise.
	* p-valprint.c (pascal_type_print_base): Likewise.

2009-07-02  Ulrich Weigand  <[email protected]>

	* printcmd.c (next_gdbarch): New static variable.
	(set_next_address, do_examine, x_command): Set it.
	(decode_format): Use 'a' size to indicate width of an address.
	(do_examine): Add GDBARCH argument.  Handle 'a' size.
	(x_command): Pass architecture to do_examine.
	Error if called without argument the first time.  
	(do_one_display): Pass architecture to do_examine.

	(examine_i_type, examine_b_type, examine_h_type, examine_w_type,
	examine_g_type): Remove.
	(_initialize_printcmd): Do not initialize them.
	(do_examine): Use builin_type_int... instead of examine_..._type.

2009-07-02  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (struct builtin_type): Add internal_fn member.
	* gdbtypes.c (gdbtypes_post_init): Initialize it.
	* value.c (internal_fn_type): Remove.
	(_initialize_values): Do not initialize it.

	* value.c (struct internalvar): Add enum internalvar_kind type and
	kind member.  Restructure union internalvar_data type.  Remove type,
	canonical, and make_value members.
	(init_if_undefined_command): Update for data structure changes.
	(create_internalvar): Likewise.
	(create_internalvar_type_lazy): Likewise.
	(get_internalvar_integer): Likewise.
	(get_internalvar_function): Likewise.
	(set_internalvar_component): Likewise.
	(set_internalvar): Likewise.
	(set_internalvar_integer): Likewise.
	(set_internalvar_function): Likewise.
	(clear_internalvar): Likewise.
	(add_internal_function): Likewise.
	(preserve_one_internalvar): New function.
	(preserve_values): Call it.

	* value.h (value_of_internalvar): Add GDBARCH parameter.
	(internalvar_make_value): Likewise.
	* value.c (value_of_internalvar): Add GDBARCH parameter.  Pass it to
	make_value callback.  Use it to generate per-architecture result value
	types for internal variables with no pre-defined type.  Update for data
	structure changes.
	(show_convenience): Pass architecture to value_of_internalvar.
	* eval.c (evaluate_subexp_standard): Likewise.
	* infrun.c (siginfo_make_value): Add GDBARCH parameter.  Use it
	instead of current frame architecture.  Return per-architecture type.

	* value.h (set_internalvar_string): Add prototype.
	* value.c (set_internalvar_string): New function.
	* tracepoint.c (set_traceframe_context): Use it.

2009-07-02  Ulrich Weigand  <[email protected]>

	* jv-lang.h (java_int_type, java_byte_type, java_short_type,
	java_long_type, java_boolean_type, java_char_type, java_float_type,
	java_double_type, java_void_type): Remove.
	(struct builtin_java_type): New data type.
	(builtin_java_type): Add prototype.
	(java_primitive_type): Add GDBARCH argument.
	(java_primitive_type_from_name): Likewise.
	(type_from_class): Likewise.

	* jv-lang.c (java_int_type, java_byte_type, java_short_type,
	java_long_type, java_boolean_type, java_char_type, java_float_type,
	java_double_type, java_void_type): Remove.

	(build_java_types, builtin_java_type): New functions.
	(java_type_data): New static variable.
	(_initialize_java_language): Initialize it.  No longer initialize
	global types.
	(java_language_arch_info): Use per-architecture types.

	(java_primitive_type): Add GDBARCH argument.  Return per-architecture
	type instead of refering to global variable.
	(java_primitive_type_from_name): Add GDBARCH argument.
	(java_primitive_type_name): New function.
	(java_demangled_signature_length): Use it instead of
	java_primitive_type_from_name.
	(java_demangled_signature_copy): Likewise.

	(type_from_class): Add GDBARCH argument.  Pass to java_link_class_type,
	java_primitive_type, and recursive type_from_class call.
	(java_link_class_type): Add GDBARCH argument.  Pass to type_from_class
	calls.  Use per-architecture types instead of global types.

	* jv-exp.y (parse_java_type): New define.
	Use per-architecture types instead of global types througout.

	* jv-valprint.c (java_value_print): Pass architecture to
	type_from_class and java_primitive_type_from_name.  Use per-
	architecture types instead of global types.

2009-07-01  Doug Evans  <[email protected]>

	* NEWS: Mention biarch amd64-linux gdbserver and hardware watchpoint
	support for i386-linux, amd64-linux, and i386-win32 builds of
	gdbserver.

2009-07-01  Nick Roberts  <[email protected]>

	* Makefile.in (HFILES_NO_SRCDIR): Remove entries for deleted files.

2009-06-30  Jan Kratochvil  <[email protected]>

	* Makefile.in (TARGET_FLAGS_TO_PASS): Include also FORCE_PARALLEL.
	(check//%): Construct FORCE_PARALLEL for the sub-make.  Extend the
	comment for it.

2009-06-30  Paul Pluzhnikov  <[email protected]>

	gdb/10275
	* dwarf2-frame.c (dwarf2_frame_state): Move cfa_offset, cfa_reg,
	cfa_how and cfa_exp into regs and adjust users.
	
2009-06-30  Daniel Jacobowitz  <[email protected]>

	* dwarf2read.c (inherit_abstract_dies): Work around GCC PR 40573.

2009-06-30  Vladimir Prus  <[email protected]>

	* mi/mi-cmd-stack.c (parse_print_values): New.
	(mi_cmd_stack_list_locals, mi_cmd_stack_list_args): Use the above.

2009-06-30  Vladimir Prus  <[email protected]>

	* varobj.c (varobj_get_type): Use type_to_string.

2009-06-29  Pedro Alves  <[email protected]>

	* infrun.c (handle_inferior_event): Context switch to the new
	thread when resuming for a new_thread_event.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-lang.h (ada_convert_actual): Add GDBARCH argument.
	* ada-lang.c (convert_actual): Remove stale prototype.
	(ensure_lval, make_array_descriptor, ada_convert_actual):
	Add GDBARCH argument and pass through to subroutine calls.
	(ensure_lval): Use GDBARCH instead of current_gdbarch.
	* infcall.c (value_arg_coerce): Update ada_convert_actual call.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-lang.c (resolve): Use per-architecture void type instead
	of platform-independent one.
	(ada_evaluate_subexp) [STRUCTOP_STRUCT]: Likewise.
	(ada_resolve_function): Reimplement fallback logic to avoid
	explicit reference to builtin_type_void.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-valprint.c (ada_print_scalar): Accept NULL type argument
	to indicate scalar should be printed as default integer.
	(print_optional_low_bound): Pass NULL to ada_print_scalar to
	indicate default integer output.
	* ada-typeprint.c (print_range, print_range_bound): Likewise.
	(print_choices): Likewise.  Thus, accept NULL as val_type.
	* ada-lang.c (ada_variant_discrim_type): Return NULL when failed
	to look up controlling discriminant name.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-lang.c (to_fixed_range_type): Add ORIG_TYPE argument.
	Fall back to orig_type as index type if symbol lookup fails.
	Allocate result types from ORIG_TYPE's objfile.
	(ada_array_bound_from_type, to_fixed_array_type,
	ada_evaluate_subexp): Pass original index type to
	to_fixed_range_type.  Do not pass objfile.

	* ada-typeprint.c (print_range_type_named): Add ORIG_TYPE argument.
	Fall back to orig_type as index type if symbol lookup fails.
	(print_array_type, ada_print_type): Pass original index type
	to print_range_type_named.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-lang.c (ada_index_type): Update comment.

2009-06-29  Ulrich Weigand  <[email protected]>

	* ada-lang.c (ada_index_type): Make static.  Add NAME argument.
	Throw error on invalid input arguments.  Return NULL if unable
	to determine index type.

	(ada_array_bound_from_type): Remove TYPEP argument.
	(ada_array_bound): Make static.  Return LONGEST instead of value.
	Update for ada_array_bound_from_type change.
	(ada_array_length): Return LONGEST instead of value.
	Update for ada_array_bound_from_type change.
	(make_array_descriptor): Update for ada_array_bound change.

	(ada_evaluate_subexp) [OP_ATR_RANGE, OP_ATR_FIRST, OP_ATR_LAST,
	OP_ATR_LENGTH]: Update for ada_array_bound_from_type,
	ada_array_bound, ada_array_length, ada_index_type changes.
	Always use ada_index_type to compute result type; fall back
	to architecture-specific integer type if ada_index_type fails.

	* ada-lang.h (ada_index_type): Remove prototype.
	(ada_array_bound): Likewise.

2009-06-29  Pedro Alves  <[email protected]>

	* dbxread.c (read_dbx_symtab): Clear has_line_numbers when ending
	a psymtab.

2009-06-29  Tom Tromey  <[email protected]>

	* README: Mention parallel check.

2009-06-29  Sami Wagiaalla  <[email protected]>

	* dwarf2read.c (read_import_statement): Properly set import location
	and destination.
	* cp-support.h (cp_add_using, cp_add_using_directive): Now take char*
	inner, char* outer arguments. Updated callers.

2009-06-29  Ulrich Weigand  <[email protected]>

	* value.h (value_subscript, value_subscripted_rvalue,
	value_bitstring_subscript, value_ptradd): Use LONGEST instead
	of value as type of the index argument.
	(value_ptrsub): Remove.
	* valarith.c (value_subscript, value_subscripted_rvalue,
	value_bitstring_subscript, value_ptradd): Use LONGEST instead
	of value as type of the index argument.
	(value_ptrsub): Remove.

	* wrapper.h (gdb_value_subscript): Use LONGEST instead of
	value as type of the index argument.
	* wrapper.c (gdb_value_subscript): Likewise.

	Update calls to gdb_value_subscript, value_subscript,
	value_subscripted_rvalue, value_bitstring_subscript and
	value_ptradd to use LONGEST instead of value as index
	argument type.  Use value_ptradd instead of value_ptrsub.
	* ada-lang.c (ada_value_subscript, ada_value_ptr_subscript,
	ada_tag_name_2): Update.
	* ada-tasks.c (read_atcb): Update.
	* eval.c (evaluate_subexp_standard): Update.
	* valarith.c (value_subscript): Update.
	* gnu-v2-abi.c (gnuv2_virtual_fn_field): Update.
	* gnu-v3-abi.c (gnuv3_get_virtual_fn, gnuv3_baseclass_offset,
	gnuv3_method_ptr_to_value): Update.
	* jv-lang.c (evaluate_subexp_java): Update.
	* m2-lang.c (evaluate_subexp_modula2): Update.
	* python/python-value.c (valpy_getitem, valpy_binop): Update.
	* wrapper.c (gdb_value_subscript): Update.
	* varobj.c (c_describe_child): Update.

2009-06-29  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (make_function_type): Remove OBJFILE parameter.
	* gdbtypes.c (make_function_type): Remove OBJFILE parameter.
	(lookup_function_type): Update call.
	* stabsread.c (read_type): Likewise.
	* dwarf2read.c (read_subroutine_type): Use lookup_function_type
	instead of make_function_type.
	* jv-lang.c (type_from_class): Likewise.  Do not allocate types
	on the fake "dynamics" obstack.

2009-06-29  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (struct builtin_type): Remove builtin_core_addr,
	nodebug_text_symbol, nodebug_data_symbol, nodebug_unknown_symbol,
	and nodebug_tls_symbol members.
	(struct objfile_type): New data structure.
	(objfile_type): Add prototype.
	* gdbtypes.c (gdbtypes_post_init): Remove initialization code
	for types no longer in struct builtin_type.
	(objfile_type_data): New static variable.
	(_initialize_gdbtypes): Initialize it.
	(objfile_type): New function.

	* gdbtypes.h (builtin_type_error): Remove.
	* gdbtypes.c (build_complex): Do not use builtin_type_error.
	* symtab.c (builtin_type_error): Remove.
	(_initialize_symtab): Remove initialization.

	* stabsread.c (dbx_lookup_type, define_symbol, error_type,
	rs6000_builtin_type, read_range_type): Use per-objfile types
	instead of global or per-architecture builtin types.
	* coffread.c (decode_type): Likewise.
	* dwarf2read.c (read_array_type, read_tag_string_type,
	new_symbol, die_type): Likewise.
	* mdebugread.c (parse_symbol, basic_type, upgrade_type,
	parse_procedure, psymtab_to_symtab_1): Likewise.
	* xcoffread.c (process_xcoff_symbol): Likewise.
	* parse.c (write_exp_msymbol): Likewise.

	* stabsread.c (rs6000_builtin_type_data): New static variable.
	(_initialize_stabsread): Initialize it.
	(rs6000_builtin_type): Add OBJFILE argument.  Allocate builtin
	types per-objfile instead of globally.

	* stabsread.c (dbx_lookup_type): Add OBJFILE argument.  Use it
	instead of current_objfile; pass it to rs6000_builtin_type.
	(dbx_alloc_type, read_type, read_range_type): Update calls.
	(cleanup_undefined_types_noname): Add OBJFILE argument and
	pass it to dbx_lookup_type.
	(cleanup_undefined_types): Add OBJFILE argument and pass it
	to cleanup_undefined_types_noname.
	* stabsread.h (cleanup_undefined_types): Add OBJFILE argument.
	* buildsym.c (end_symtab): Update call.

2009-06-29  Ulrich Weigand  <[email protected]>

	* darwin-nat-info.c (darwin_debug_regions_recurse): Use
	target_gdbarch instead of current_gdbarch.

2009-06-29  Ulrich Weigand  <[email protected]>

	* Makefile.in (ALL_64_TARGET_OBS): Add amd64-windows-tdep.o.
	(ALL_TARGET_OBS): Add moxie-tdep.o, i386-darwin-tdep.o, and
	solib-darwin.o.

	* configure.tgt: Add comment.

2009-06-28  Paul Pluzhnikov  <[email protected]>

	* mi/mi-cmds.c (mi_cmds): Remove unimplemented entries.
	
2009-06-27  Daniel Jacobowitz  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	* NEWS: Document inlined function support.
	* Makefile.in (SFILES): Add inline-frame.c.
	(COMMON_OBS): Add inline-frame.o.
	* block.c (contained_in): Rewrite to use lexical nesting.
	(block_linkage_function): Skip inlined function blocks.
	(block_inlined_p): New.
	* block.h (struct block): Update comment.
	(block_inlined_p): New prototype.
	* blockframe.c (get_frame_block): Handle inlined functions.
	(get_frame_function): Do not use block_linkage_function.
	(block_innermost_frame): Use get_frame_block and contained_in.
	* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
	Skip over inlined functions.  Simplify epilogue check.
	(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
	Update comments.
	(set_momentary_breakpoint): Only accept non-inlined frames.
	(watch_command_1): Use frame_unwind_caller_pc and
	frame_unwind_caller_id instead of get_prev_frame.
	(until_break_command): Likewise.  Use get_stack_frame_id.
	* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
	* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
	* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
	(read_func_scope, new_symbol): Likewise.  Handle arguments specially
	for inlined functions without call site information.
	(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
	(die_specification): Treat DW_AT_abstract_origin as a specification.
	(read_type_die): Handle DW_TAG_inlined_subroutine.
	* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
	* frame.c (fprint_frame_id): Print inline depth.
	(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
	(skip_inlined_frames, get_stack_frame_id): New.
	(frame_unwind_caller_id): Use skip_inlined_frames.
	(frame_id_inlined_p): New.
	(frame_id_eq): Make the logic match the comments.  Add inline_depth
	check.
	(frame_id_inner): Handle inlined functions.
	(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
	(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
	(get_prev_frame_1): Check for inline frames.  Split out frame
	allocation to get_prev_frame_raw.
	(get_prev_frame_raw): New function.
	(get_prev_frame): Handle inline frames.
	(get_frame_pc): Use frame_unwind_pc.
	(get_frame_address_in_block): Skip inlined frames on both sides.
	(pc_notcurrent): Delete.
	(find_frame_sal): Rewrite to handle inline call sites.  Use
	get_frame_address_in_block.
	(deprecated_update_frame_pc_hack): Make static.
	* frame.h: Update comments.
	(struct frame_id): Add inline_depth.
	(enum frame_type): Add INLINE_FRAME.
	(frame_id_inlined_p, get_stack_frame_id): New prototypes.
	* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
	* infcmd.c (set_step_frame): New function.
	(step_once): Use set_step_frame.  Handle inlined functions.
	(until_next_command): Use set_step_frame.
	(finish_backward), finish_forward): Use get_stack_frame_id.
	(finish_command): Support inlined functions.
	* inferior.h (set_step_info): New prototype.
	* infrun.c (RESUME_ALL): Use minus_one_ptid.
	(clear_proceed_status): Clear step_stack_frame_id.
	(init_wait_for_inferior): Call clear_inline_frame_state.
	(init_execution_control_state): Make static.
	(set_step_info): New function.
	(init_thread_stepping_state): Do not set the symtab or line here.
	(stepped_in_from): New function.
	(handle_inferior_event): Handle inlined functions.  Use set_step_info.
	(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
	(struct inferior_status): Add step_stack_frame_id.
	(save_inferior_status, restore_inferior_status): Save and restore
	step_stack_frame_id.
	* inline-frame.c, inline-frame.h: New files.
	* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
	* regcache.c (regcache_write_pc): Call reinit_frame_cache.
	* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
	* stack.c (frame_show_address): New.
	(print_frame_info, print_frame): Use it.
	(find_frame_funname): Use get_frame_function.  Handle inlined blocks.
	(frame_info): Mark inlined functions.
	(backtrace_command_1): Use get_current_user_frame.
	(print_frame_local_vars, print_frame_label_vars): Update comments.
	(return_command): Refuse inlined functions.
	* symtab.c (lookup_symbol_aux_local): Stop at inlined function
	boundaries.
	(find_function_start_sal): Avoid inlined functions.
	(completion_list_add_fields): New function.
	(default_make_symbol_completion_list): Use it.  Use block_static_block
	and block_global_block.  Check for inlined functions.
	(skip_prologue_using_sal): Avoid line number comparison across
	inlining.
	* symtab.h (struct symbol): Add is_inlined.
	(SYMBOL_INLINED): New.
	* target.c (target_resume): Call clear_inline_frame_state.
	* valops.c (value_of_variable): Check block_inlined_p.

2009-06-27  Daniel Jacobowitz  <[email protected]>

	* frame.c (frame_unwind_id): Renamed to ...
	(frame_unwind_caller_id): ... this.  All callers updated.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.  All callers updated.
	* frame.h: Document frame_unwind_caller_WHAT functions.
	(frame_unwind_id): Renamed to ...
	(frame_unwind_caller_id): ... this.
	(frame_pc_unwind): Renamed to ...
	(frame_unwind_caller_pc): ... this.
	* hppa-tdep.c (hppa_find_unwind_entry_in_block): Correct comment.
	* stack.c (parse_frame_specification_1): Do not rely on
	frame_unwind_id.

2009-06-27  Michael Snyder  <[email protected]>

	* infrun.c (handle_inferior_event): Improve handling of
	reverse-stepping into and over shared library functions.

2009-06-25  Karen Osmond  <[email protected]>

	* linespec.c (find_method): Add new not_found_ptr parameter to
	bring in line with symtab_from_filename, decode_variable.
	(decode_compound): Likewise.  Also propagate not_found_ptr to 
	find_method.
	(decode_line_1): Propagate not_found_ptr to decode_compound.
	(cplusplus_error): Now throws NOT_FOUND_ERROR.

2009-06-25  Karen Osmond  <[email protected]>

	* MAINTAINERS (Write After Approval): Add self.

2009-06-23  Ulrich Weigand  <[email protected]>

	* valops.c (value_one): Reimplement broken decimal-float case.

2009-06-23  Ulrich Weigand  <[email protected]>

	* eval.c (evaluate_subexp_standard): Use expression architecture
	instead of current_gdbarch.

	* infrun.c (handle_inferior_event): Avoid unncessary reference
	to current_gdbarch and get_current_frame ().

2009-06-23  Ulrich Weigand  <[email protected]>

	* breakpoint.h (set_longjmp_breakpoint): Add THREAD argument.
	(enum bptype): Add bp_longjmp_master.

	* breakpoint.c (create_longjmp_master_breakpoint): New function.
	(update_breakpoints_after_exec): Handle bp_longjmp_master
	breakpoints.  Call create_longjmp_master_breakpoint.
	(print_it_typical, bpstat_stop_status, bpstat_what,
	print_one_breakpoint_location, allocate_bp_location, mention,
	delete_command, breakpoint_re_set_one): Handle bp_longjmp_master.
	(breakpoint_re_set): Call create_longjmp_master_breakpoint.
	(create_longjmp_breakpoint): Delete.
	(set_longjmp_breakpoint): Add THREAD argument.  Reimplement
	to install momentary clones of bp_longjmp_master breakpoints.

	* infcmd.c (step_1): Pass thread to set_longjmp_breakpoint.

2009-06-23  Cary Coutant  <[email protected]>

	* dwarf2read.c (dwarf_decode_lines): Ignore rows where is_stmt is 0.
	Set basic_block to 0 after a special opcode.

2009-06-23  Jan Kratochvil  <[email protected]>

	Fix a regression by the mmap patch from 2009-06-16.
	* symfile.c (reread_symbols): Move sym_finish and clear_objfile_data
	calls before deleting the OBJFILE obstack.  Extend the comment.

2009-06-23  Ulrich Weigand  <[email protected]>

	* jv-lang.h (JAVA_OBJECT_SIZE): Remove.
	(get_java_object_header_size): Add GDBARCH parameter.
	* jv-lang.c (get_java_object_header_size): Add GDBARCH parameter.
	Use it instead of current_gdbarch.
	(evaluate_subexp_java): Replace JAVA_OBJECT_SIZE with call to
	get_java_object_header_size.
	* jv-valprint.c (java_value_print): Likewise.

2009-06-23  Sami Wagiaalla  <[email protected]>

	* dwarf2read.c (process_die): Handle import statements
	(DW_TAG_imported_declaration, case DW_TAG_imported_module)
	(read_import_statement): New.
	(read_func_scope): Update using_directives to point to current context
	(read_lexical_block_scope): Ditto.
	* cp-support.h: Added prototype for cp_add_using.
	* cp-namespace.c: Removed local context_stack.
	(cp_initialize_namespace): Deleted.
	(cp_finalize_namespace): Deleted.
	(cp_add_using_directive): Use using_directives instead of using_list.
	(cp_add_using): No longer static.
	* buildsym.h: Created global using_direct variable.
	Created using_direct variable in context_stack.
	* buildsym.c (finish_block): Set using directives for the block under
	construction.
	(start_symtab): Removed call to cp_initialize_namespace().
	(end_symtab): Removed call to cp_finalize_namespace().
	(push_context): Save and reset using_directives.
	* block.c (block_using): Return using directives for given
	block instead of static block.

2009-06-23  Ulrich Weigand  <[email protected]>

	* target-descriptions.h (struct type): Do not declare.
	(struct tdesc_type): Declare.
	(tdesc_named_type): Change return type to struct tdesc_type *.
	(tdesc_record_type): Remove.
	(tdesc_create_vector): Add prototype.
	(tdesc_create_union): Likewise.
	(tdesc_add_field): Likewise.

	* target-descriptions.c (struct tdesc_reg): Replace gdb_type
	member by tdesc_type member.
	(struct tdesc_type_field, tdesc_type_field): Add type and vector def.
	(struct tdesc_type, tdesc_type_p): Likewise.
	(struct tdesc_arch_reg, tdesc_arch_reg): Likewise.
	(struct tdesc_feature): Change type of "types" to VEC(tdesc_type_p).
	(struct tdesc_arch_data): Replace registers member by arch_regs.

	(tdesc_predefined_types): Change to array of pre-defined
	struct tdesc_type structures.  Add "code_ptr" and "data_ptr".
	(tdesc_named_type): Return struct tdesc_type * instead of GDB type.
	(tdesc_gdb_type): New function.

	(target_find_description): Update for data structure changes.
	(tdesc_data_cleanup): Likewise.
	(tdesc_numbered_register): Likewise.
	(tdesc_use_registers): Likewise.
	(tdesc_create_reg): Likewise.
	
	(tdesc_find_arch_register): New function.
	(tdesc_find_register): Use it.
	(tdesc_register_type): Use tdesc_gdb_type to generate GDB type from
	tdesc_type on demand; cache generated types in tdesc_arch_reg.

	(tdesc_free_type): New function.
	(tdesc_free_feature): Call it.

	(tdesc_create_vector): New function.
	(tdesc_create_union): Likewise.
	(tdesc_add_field): Likewise.
	(tdesc_record_type): Remove.

	(tdesc_type_id): Remove.
	(maint_print_c_tdesc_cmd): Update for data structure changes.  Update
	generated code to create tdesc_type structures instead of GDB types.

	* xml-tdesc.c: Do not include "gdbtypes.h".
	(struct tdesc_parsing_data): Change type of current_union to
	struct tdesc_type *.
	(tdesc_start_reg): Do not special-case "code_ptr" or "data_ptr".
	(tdesc_start_union): Call tdesc_create_union.
	(tdesc_start_field): Call tdesc_add_field.
	(tdesc_start_vector): Call tdesc_create_vector.
	(tdesc_end_union): Remove.
	(feature_children): Remove reference to tdesc_end_union.

	* features/arm-with-iwmmxt.c: Regenerate.
	* features/mips-linux.c: Regenerate.
	* features/mips64-linux.c: Regenerate.
	* features/rs6000/powerpc-32.c: Regenerate.
	* features/rs6000/powerpc-32l.c: Regenerate.
	* features/rs6000/powerpc-403.c: Regenerate.
	* features/rs6000/powerpc-403gc.c: Regenerate.
	* features/rs6000/powerpc-505.c: Regenerate.
	* features/rs6000/powerpc-601.c: Regenerate.
	* features/rs6000/powerpc-602.c: Regenerate.
	* features/rs6000/powerpc-603.c: Regenerate.
	* features/rs6000/powerpc-604.c: Regenerate.
	* features/rs6000/powerpc-64.c: Regenerate.
	* features/rs6000/powerpc-64l.c: Regenerate.
	* features/rs6000/powerpc-7400.c: Regenerate.
	* features/rs6000/powerpc-750.c: Regenerate.
	* features/rs6000/powerpc-860.c: Regenerate.
	* features/rs6000/powerpc-altivec32.c: Regenerate.
	* features/rs6000/powerpc-altivec32l.c: Regenerate.
	* features/rs6000/powerpc-altivec64.c: Regenerate.
	* features/rs6000/powerpc-altivec64l.c: Regenerate.
	* features/rs6000/powerpc-e500.c: Regenerate.
	* features/rs6000/powerpc-e500l.c: Regenerate.
	* features/rs6000/powerpc-isa205-32l.c: Regenerate.
	* features/rs6000/powerpc-isa205-64l.c: Regenerate.
	* features/rs6000/powerpc-isa205-altivec32l.c: Regenerate.
	* features/rs6000/powerpc-isa205-altivec64l.c: Regenerate.
	* features/rs6000/powerpc-isa205-vsx32l.c: Regenerate.
	* features/rs6000/powerpc-isa205-vsx64l.c: Regenerate.
	* features/rs6000/powerpc-vsx32.c: Regenerate.
	* features/rs6000/powerpc-vsx32l.c: Regenerate.
	* features/rs6000/powerpc-vsx64.c: Regenerate.
	* features/rs6000/powerpc-vsx64l.c: Regenerate.
	* features/rs6000/rs6000.c: Regenerate.

2009-06-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (decode_packed_array): If the value is a pointer to
	an array, then use value_ind to dereference it, not ada_value_ind.
	(ada_template_to_fixed_record_type_1): Handle the case where a
	dynamic field is an aligner type.
	(to_fixed_array_type): Add handling for packed array types.
	(ada_get_base_type): Do not follow the XVS type if the type is
	an aligner type.
	(ada_evaluate_subexp): Split a few statements up for clarity
	and debuggability.
	<OP_FUNCALL>: Add handling of the case of a packed array that
	has already been fixed.

2009-06-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (evaluate_subexp): Delete.  Use the version from eval.c.
	(evaluate_subexp_type): Reimplement using evaluate_subexp.
	* value.h (evaluate_subexp): Add declaration.
	* eval.c (evaluate_subexp): Make non-static.
	* objc-lang.c (print_object_command): Use evaluate_subexp.

2009-06-23  Paul Pluzhnikov  <[email protected]>

	Revert 2009-05-14 breakpoint commit (no longer needed).
	* breakpoint.h (breakpoint_re_set_objfile): Remove
	* breakpoint.c (breakpoint_re_set_objfile): Likewise
	(create_overlay_event_breakpoint): Remove objfile parameter,
	iterate over all objfiles.
	* objfiles.c (objfile_relocate): Update.
	* symfile.c (new_symfile_objfile): Likewise.	
	
2009-06-23  Tom Tromey  <[email protected]>

	PR gdb/10309:
	* c-lang.c (classify_type): Iterate over typedefs.
	* c-valprint.c (textual_element_type): Iterate over typedefs.

2009-06-22  Tristan Gingold  <[email protected]>

	* darwin-nat.c (darwin_xfer_partial): Use host_address_to_string
	instead of "%p".

2009-06-22  Jan Kratochvil  <[email protected]>

	PR gdb/9988:
	* buildsym.c (block_compar): New function.
	(end_symtab): Replace the bubble sort by a qsort based code.

2009-06-22  Sami Wagiaalla  <[email protected]>

	* MAINTAINERS (Write After Approval): Add self.

2009-06-22  Ulrich Weigand  <[email protected]>

	* spu-tdep.c (spu_get_longjmp_target): New function.
	(spu_gdbarch_init): Install it.

2009-06-22  H.J. Lu  <[email protected]>

	PR server/10306
	* remote.c (getpkt_or_notif_sane_1): Initialize val to -1.

2009-06-21  Michael Snyder  <[email protected]>

	* inferior.h: Update ancient comment.

2009-06-20  Aleksandar Ristovski  <[email protected]>
	    Pedro Alves  <[email protected]>

	* solib-svr4.c (IGNORE_FIRST_LINK_MAP_ENTRY): Avoid dereferencing
	NULL pointer.
	(scan_dyntag): Skip if input bfd isn't elf flavoured.
	(locate_base): Call elf_locate_base even without an exec_bfd.

2009-06-19  Samuel Bronson  <[email protected]>

	PR cli/9903:
	* cli/cli-decode.c (apropos_cmd): Skip traversing abbreviations
	for prefix commands to avoid duplicates in the output.

2009-06-19  Samuel Bronson  <[email protected]>

	PR cli/9903:
	* cli/cli-decode.c (apropos_cmd): Fix avoidance of double
	printing.

2009-06-19  Jerome Guitton  <[email protected]>

	* breakpoint.c (expand_line_sal_maybe): When explicit_line,
	skip prologue on each sals.
	(skip_prologue_sal): Return explicit_line and explicit_pc
	unmodified.

2009-06-19  Tristan Gingold  <[email protected]>

	* darwin-nat.c (_initialize_darwin_inferior): Remove commented-out
	line.

2009-06-19  Tristan Gingold  <[email protected]>
	* machoread.c (macho_symtab_read): Adjust for bfd changes.
	* darwin-nat.h (struct darwin_exception_msg): New type to describe
	a mach exception.
	(struct private_thread_info): New type to describe the state of the
	thread.
	(DEF_VEC_I thread_t): Removed, replaced by ...
	(DEF_VEC_O darwin_thread_t): ... this new type.
	(struct darwin_inferior): Renamed to ...
	(struct private_inferior): ... this type.  Fields added.
	(darwin_not_port): Moved into the private inferior structure.
	* darwin-nat.c: Add includes, improve comments.
	Rewrite to handle multiple threads and processes.
	(darwin_resume_to): New function and protype.
	(darwin_resume, darwin_wait_to, darwin_wait): Ditto.
	(darwin_kill_inferior): Add ops argument.
	(darwin_pid_to_str): New function.
	(darwin_thread_alive): Ditto.
	(darwin_inf, darwin_not_port): Removed.
	(darwin_inf_fake_stop): New variable.
	(msgin, msgout, msg_state, exc_msg): Removed.
	(mach_check_error): Use warning instead of error.
	(darwin_ptrace): Adjust debug level.
	(cmp_thread_t): Fix names (typo).
	(darwin_check_new_threads): Argument is now an inferior,
	adjust for new structures, add no change check, ignore dead ports,
	handle first thread case.
	(find_inferior_task_it): New function.
	(find_inferior_notify_it): Ditto.
	(darwin_find_inferior_by_task): Ditto.
	(darwin_find_inferior_by_notify): Ditto.
	(darwin_find_thread): Ditto.
	(darwin_suspend_inferior): Ditto.
	(darwin_resume_inferior): Ditto.
	(catch_exception_raise_state): Removed.
	(catch_exception_raise_state_identity): Removed.
	(darwin_suspend_inferior_it): New function.
	(darwin_resume_inferior_it): Ditto.
	(darwin_dump_message): New function, extracted from darwin_wait.
	(darwin_decode_exception_message): New function.
	(darwin_encode_reply): New function.
	(catch_exception_raise): Removed.
	(darwin_send_reply): New function, extracted from darwin_resume.
	(darwin_resume_thread): New function, extracted from darwin_resume.
	(struct resume_inferior_threads_param): New type.
	(darwin_resume_inferior_threads_it): New function.
	(darwin_resume_inferior_threads): New function.
	(darwin_suspend_inferior_threads): New function.
	(darwin_resume): Mostly rewritten to handle multiple threads and
	some corner cases.
	(darwin_decode_message): New function extracted from darwin_wait.
	(cancel_breakpoint): New function.
	(darwin_wait): Mostly rewritten.  Handle multiple threads.
	(darwin_mourn_inferior): Adjust for per process structures.
	(darwin_reply_to_all_pending_messages): New function.
	(darwin_stop_inferior): Adjust for per inferior structures.
	(darwin_attach_pid): Ditto.
	(darwin_init_thread_list): Ditto.
	(darwin_attach): Ditto.
	(darwin_detach): Ditto.
	(darwin_files_info): Now empty.
	(darwin_pid_to_str): Adjust returns string to match one expected by
	the testsuite.
	(darwin_read_write_inferior): Rename err variable to match other uses.
	Adjust debug message.  Handle submaps.
	(darwin_xfer_memory): Adjust for per inferior structures.
	(set_enable_mach_exceptions): Ditto.
	(darwin_pid_to_exec_file): New function.
	(darwin_get_ada_task_ptid): Ditto.
	(darwin_supports_multi_process): Ditto.
	(_initialize_darwin_inferior): Remove useless assertion, adjust for
	per inferior structures.  Add new target operations.

2009-06-18  Hui Zhu  <[email protected]>
	    Michael Snyder  <[email protected]>

	* infrun.c (handle_inferior_event): Improve reverse stepping
	through function epilogue.

	* infrun.c (handle_inferior_event): Reverse-next through
	trampoline.

2009-06-18  Paul Pluzhnikov  <[email protected]>

	* dwarf2-frame.c (struct comp_unit): Use bfd_size_type for
	dwarf_frame_size.

2009-06-17  Tom Tromey  <[email protected]>

	* dwarf2read.c (zlib_decompress_section): Use a cleanup.

2009-06-17  Ulrich Weigand  <[email protected]>

	* gdbarch.sh (pointer_to_address): Change to type 'm'.
	(address_to_pointer): Likewise.
	* gdbarch.c, gdbarch.h: Regenerate.

	* inferior.h (unsigned_pointer_to_address): Add GDBARCH argument.
	(signed_pointer_to_address): Likewise.
	(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.
	* findvar.c (unsigned_pointer_to_address): Likewise.
	(signed_pointer_to_address): Likewise.
	(unsigned_address_to_pointer, address_to_signed_pointer): Likewise.

	* avr-tdep.c (avr_address_to_pointer): Likewise.
	(avr_pointer_to_address): Likewise.
	* iq2000-tdep.c (iq2000_pointer_to_address): Likewise.
	(iq2000_address_to_pointer): Likewise.
	* m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise.
	(m32c_m16c_pointer_to_address): Likewise.
	* spu-tdep.c (spu_pointer_to_address): Likewise.
	* xstormy16-tdep.c (xstormy16_pointer_to_address): Likewise.
	(xstormy16_address_to_pointer): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* printcmd.c (print_scalar_formatted): Always truncate
	unsigned data types.

	* cli-dump.c (struct callback_data): Change type of load_offset
	to CORE_ADDR.
	(restore_binary_file): Update type casts.
	(restore_command): Parse load_offset as address, not long.

	* utils.c (string_to_core_addr): Do not sign-extend value.
	* varobj.c (find_frame_addr_in_frame_chain): Truncate frame_base
	before comparing against requested frame address.

2009-06-17  Ulrich Weigand  <[email protected]>

	* gdbarch.sh (gcore_bfd_target): New gdbarch callback.
	* gdbarch.h, gdbarch.c: Regenerate.

	* gcore.c (default_gcore_target): Make return value const.
	Call gdbarch_gcore_bfd_target if present.
	(default_gcore_arch, default_gcore_mach): Use target_gdbarch.

	* corelow.c (core_read_description): Call gdbarch_core_read_description
	on core_gdbarch instead of current_gdbarch.

	* ppc-linux-tdep.c (ppc_linux_init_abi): Install gcore_bfd_target.

2009-06-17  Ulrich Weigand  <[email protected]>

	* gdbtypes.c (create_string_type): Receive character type as argument.
	* gdbtypes.h (create_string_type): Add character type argument.
	* dwarf2read.c (read_tag_string_type): Pass character type to
	create_string_type.

	* value.h (value_string): Add character type argument.
	* valops.c (value_string): Add character type argument.  Pass it to
	create_string_type.  Do not allocate space in inferior.
	* valarith.c (value_concat): Pass character type to value_string.

	* value.h (value_typed_string): Rename to ...
	(value_cstring): ... this.
	* valops.c (value_typed_string): Rename to ...
	(value_cstring): ... this.
	* c-lang.c (evaluate_subexp_c): Update.

	* python/python-value.c (builtin_type_pychar): New define.
	(convert_value_from_python): Call value_cstring instead
	of value_from_string.
	* value.c (value_from_string): Remove.
	* value.h (value_from_string): Remove.

	* eval.c (evaluate_subexp_standard): Pass character type to
	value_string.  Pass expression architecture to value_nsstring
	and lookup_child_selector.
	* objc-lang.h (lookup_objc_class): Add GDBARCH parameter.
	(lookup_child_selector): Likewise.
	(value_nsstring): Likewise.
	* objc-lang.c (lookup_objc_class): Add GDBARCH parameter.
	Pass character type to value_string..
	(lookup_child_selector): Likewise.
	(value_nsstring): Add GDBARCH parameter, use it instead of
	objfile architecture.  Pass architecture to lookup_objc_class
	and lookup_child_selector. Pass character type to value_string.
	(end_msglist): Pass architecture to lookup_objc_class.
	* objc-exp.y: Pass architecture to lookup_objc_class.

2009-06-17  Ulrich Weigand  <[email protected]>

	* gdbtypes.h (struct language_defn): Add forward declaration.
	(lookup_typename): Add LANGUAGE and GDBARCH parameters.
	(lookup_unsigned_typename): Likewise.
	(lookup_signed_typename): Likewise.
	* gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
	Use them instead of current_language and current_gdbarch.
	(lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
	Pass them to lookup_typename.
	(lookup_signed_typename): Likewise.

	* c-exp.y: Pass parse_language and parse_gdbarch to
	lookup_unsigned_typename and lookup_signed_typename.
	* objc-exp.y: Likewise.
	* m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.

	* c-lang.c (evaluate_subexp_c): Pass expression language and
	gdbarch to lookup_typename.
	* printcmd.c (printf_command): Pass current language and
	gdbarch to lookup_typename.
	* python/python-type.c (typy_lookup_typename): Likewise.
	Include "language.h".

2009-06-17  Ulrich Weigand  <[email protected]>

	* sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
	Use it instead of current_gdbarch.  Pass architecture to
	sparc32_gregset_supplies_p.
	(sparc64_fpregset_supplies_p): Add GDBARCH parameter.  Use it instead
	of current_gdbarch.  Pass architecture to sparc32_fpregset_supplies_p.
	* sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
	sparc64nbsd_fpregset_supplies_p): Likewise.
	* sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
	Add GDBARCH parameter.
	(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
	(sparc_fetch_inferior_registers): Pass regcache architecture to
	sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
	(sparc_store_inferior_registers): Likewise.
	* sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
	Add GDBARCH parameter.
	(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
	of current_gdbarch.
	* aix-thread.c (pd_enable): Likewise.
	* amd64-linux-nat.c (ps_get_thread_area): Likewise.
	* bsd-uthread.c (bsd_uthread_activate): Likewise.
	* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
	* linux-thread-db.c (enable_thread_event): Likewise.
	* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
	* nto-procfs.c (procfs_open): Likewise.
	* procfs.c (invalidate_cache, procfs_insert_watchpoint,
	info_proc_mappings, info_mappings_callback): Likewise.
	* record.c (record_open): Likewise.
	* rs6000-nat.c (ARCH64): Likewise.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
	(darwin_bfd_open): Likewise.
	* memattr.c (mem_info_command): Likewise.

	* windows-nat.c (win32_resume): Use current regcache architecture
	instead of current_gdbarch.

	* dbug-rom.c (dbug_regname): Remove check against number of
	registers in current_gdbarch.
	* solib-pa64.c (read_dynamic_info): Remove unused variable.

2009-06-17  Ulrich Weigand  <[email protected]>

	* dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
	use it instead of current_gdbarch.
	* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
	* arm-tdep.c (arm_skip_prologue): Pass architecture to
	deprecated_pc_in_call_dummy.

	* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
	Use it instead of current_gdbarch.
	* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
	* breakpoint.c (expand_line_sal_maybe): Pass architecture to
	skip_prologue_using_sal.
	* arm-tdep.c (skip_prologue_using_sal): Likewise.
	* lm32-tdep.c (lm32_skip_prologue): Likewise.
	* m32-tdep.c (m32c_skip_prologue): Likewise.
	* mips-tdep.c (mips_skip_prologue): Likewise.
	* moxie-tdep.c (moxie_skip_prologue): Likewise.
	* mt-tdep.c (mt_frame_unwind_cache): Likewise.
	* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
	* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
	it to skip_prologue_using_sal.  Update call sites ...
	(frv_skip_prologue, frv_frame_unwind_cache): ... here.

	* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
	(check_for_saved): Use it instead of current_gdbarch.
	(mn10300_analyze_prologue): Set it.

	* value.c (using_struct_return): Add GDBARCH parameter.  Use it
	instead of current_gdbarch.
	* value.h (using_struct_return): Add GDBARCH parameter.
	* eval.c (evaluate_subexp_standard): Pass architecture to
	using_struct_return.
	* infcall.c (call_function_by_hand): Likewise.
	* stack.c (return_command): Likewise.
	* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

	* symtab.c (in_prologue): Add GDBARCH parameter.  Use it instead of
	current_gdbarch.
	* symtab.h (in_prologue): Add GDBARCH parameter.
	* infrun.c (handle_inferior_event): Pass architecture to in_prologue.

	* eval.c (evaluate_subexp_standard): Use expression architecture
	instead of current_gdbarch.

	* c-lang.c (evaluate_subexp_c): Use expression architecture and
	language instead of current_gdbarch and current_language.

	* printcmd.c (do_one_display): Use expression architecture instead
	of current_gdbarch.

	* infcmd.c (print_return_value): Use architecture of stop_regcache
	instead of current_gdbarch.
	(print_vector_info, print_float_info): Remove GDBARCH argument,
	use frame architecture instead.
	(vector_info, float_info): Update calls.

	* objc-lang.c (objc_skip_trampoline): Use frame architecture
	instead of current_gdbarch.

	* parse.c (write_dollar_variable): Use parse architecture instead
	of current_gdbarch.

	* source.c (line_info): Use objfile architecture instead of
	current_gdbarch.

	* symtab.c (find_function_start_sal): Use gdbarch instead of
	current_gdbarch.
	(print_msymbol_info): Use objfile architecture instead of
	current_gdbarch.

	* valops.c (value_assign): Use frame architecture instead of
	current_gdbarch.

2009-06-17  Ulrich Weigand  <[email protected]>

	* buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.

	* coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
	calling record_line.
	(enter_linenos): Likewise.
	* dbxread.c (process_one_symbol): Likewise.
	* dwarf2read.c (dwarf_decode_lines): Likewise.
	* mdebugread.c (psymtab_to_symtab_1): Likewise.
	* xcoffread.c (enter_line_range): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
	architecture instead of current_gdbarch.
	(gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
	(gen_expr): Pass expression to get_struct_ref.

	* symtab.h (struct symbol_ops): Add GDBARCH parameter to
	tracepoint_var_ref callback.
	* ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
	symbol operation callback.
	* dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
	Use it instead of current_gdbarch.
	(locexpr_tracepoint_var_ref): Add GDBARCH parameter.  Pass it to
	dwarf2_tracepoint_var_ref.
	(loclist_tracepoint_var_ref): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
	Use it instead of address bits of current_gdbarch.
	* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
	* arm-tdep.c (thumb_analyze_prologue): Pass address bits to
	make_pv_area.
	(arm_scan_prologue): Likewise.
	* m32c-tdep.c (m32c_analyze_prologue): Likewise.
	* mep-tdep.c (mep_analyze_prologue): Likewise.
	* mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
	* s390-tdep.c (s390_analyze_prologue): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
	frame architecture instead of current_gdbarch.
	(mi_cmd_data_list_changed_registers): Likewise.
	(mi_cmd_data_list_register_values): Likewise.  Pass selected
	frame to get_register.
	(get_register): Add FRAME argument, use it as frame to retrieve
	registers from (instead of selected frame).  Use frame architecture
	instead of current_gdbarch.
	(mi_cmd_data_write_register_values): Use current regcache
	architecture instead of current_gdbarch.

2009-06-17  Ulrich Weigand  <[email protected]>

	* tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
	use frame architecture instead.  Replace current_gdbarch uses.
	(tui_show_registers): Update call.
	(tui_get_register): Remove GDBARCH parameter; use frame architecture
	instead.
	(tui_show_register_group): Update call.
	(tui_check_register_values): Likewise.
	(tui_register_format): Remove GDBARCH parameter; use frame
	architecture instead.  Replace current_gdbarch uses.
	(tui_get_register): Update call.

2009-06-17  Ulrich Weigand  <[email protected]>

	* gdbarch.sh (construct_inferior_arguments): Remove.
	* gdbarch.c, gdbarch.h: Regenerate.
	* infcmd.c (get_inferior_args): Call construct_inferior_arguments
	directly instead of gdbarch_construct_inferior_arguments.
	(construct_inferior_arguments): Remove GDBARCH argument.
	* inferior.h (construct_inferior_arguments): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* symfile.c (section_is_mapped): Use objfile architecture instead
	of current_gdbarch.
	(TARGET_LONG_BYTES): Remove.
	(read_target_long_array): Add SIZE argument.  Use it instead of
	TARGET_LONG_BYTES.
	(simple_read_overlay_table): Retrieve long size from objfile
	architecture; pass it to read_target_long_array.
	(simple_read_overlay_region_table): Likewise.
	(simple_overlay_update_1): Likewise.

2009-06-17  Ulrich Weigand  <[email protected]>

	* infrun.c (cleanup_displaced_step_closure): Remove.
	(displaced_step_clear_cleanup): Move to before displaced_step_prepare.
	(displaced_step_prepare): Use displaced_step_clear_cleanup instead
	of cleanup_displaced_step_closure.
	(handle_inferior_event, keep_going): Use thread architecture instead
	of current_gdbarch.

2009-06-17  Ulrich Weigand  <[email protected]>

	* infrun.c (handle_inferior_event): Use current frame architecture
	or thread architecture instead of current_gdbarch.  Pass to
	handle_step_into_function and handle_step_into_function_backward.
	(handle_step_into_function): Add GDBARCH parameter.  Use it instead
	of current_gdbarch.
	(handle_step_into_function_backward): Likewise.
	(insert_step_resume_breakpoint_at_frame): Use frame architecture
	instead of current_gdbarch.
	(insert_step_resume_breakpoint_at_caller): Likewise.

2009-06-17  Pierre Muller  <[email protected]>
	Pedro Alves  <[email protected]>
	
	* infcmd.c (post_create_inferior): Call breakpoint_re_set after target
	is pushed for watchpoint promotion to hardware watchpoint.

2009-06-16  Paul Pluzhnikov  <[email protected]>

	* dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
	(dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
	(dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
	(dwarf_ranges_section, dwarf_frame_section)
	(dwarf_eh_frame_section): Removed.
	(dwarf2_resize_section): Likewise.
	(dwarf2_read_section): Now static, use bfd_mmap() if possible.
	(dwarf2_get_section_info): New function.
	(munmap_section_buffer): Likewise.
	(dwarf2_per_objfile_cleanup): Likewise.
	(section_is_p): Signature change.
	* dwarf2-frame.c (dwarf2_build_frame_info): Use
	dwarf2_get_section_info instead of dwarf2_read_section.
	
2009-06-16  Paul Pluzhnikov  <[email protected]>

	* solib.c (symbol_add_stub): New FLAGS parameter.
	(solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
	directly.
	(solib_add): Defer breakpoint_re_set until after all solibs.
	* bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
	* rs6000-nat.c (objfile_symbol_add): Adjust.
	* symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
	(new_symfile_objfile): Likewise.
	(symbol_file_add_with_addrs_or_offsets): Likewise.
	(symbol_file_add_from_bfd): Likewise.
	(symbol_file_add): Likewise.
	* symfile.h (enum symfile_add_flags): New. Adjust prototypes.
	* symfile-mem.c (symbol_file_add_from_memory): Adjust.
	* windows-nat.c (safe_symbol_file_add_stub): Adjust.
	* machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.
	
2009-06-16  Keith Seitz  <[email protected]>

	* linespec.c (collect_methods): Delete.
	(add_matching_methods): Reove destructor special case.
	(find_method): Call find_methods directly instead of
	collect_methods.
	* valops.c (value_struct_elt): Remove destructor
	special cases.
	(check_field): Likewise.
	(value_struct_elt_for_reference): Likewise.
	(destructor_name_p): Remove misleading comment about dtors
	being "special cases". 
	* gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
	* gdbtypes.c (get_destructor_fn_field): Likewise. 

2009-06-16  Pedro Alves  <[email protected]>

	* mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
	TARGET_OJECT_MEMORY reads to the topmost target, not to the
	flattened current_target.

2009-06-16  Tristan Gingold  <[email protected]>

	* avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
	call_length field.
	(avr_register_name): Add const to register_names.
	(avr_scan_arg_moves): Move inside avr_scan_prologue.
	(avr_scan_prologue): Add pc_end argument.
	Only read prologue bytes that can be read.
	Limit the scan to the known prologue length.
	Makes pattern variables static and const.
	Fix indentation.
	(avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
	Fix indentation.
	(avr_breakpoint_from_pc): Constify avr_break_insn.
	(avr_extract_return_value): Fix function comment.
	(avr_frame_unwind_cache): Fix GNU style violations.
	Pass current_pc argument to avr_scan_prologue to stop prologue
	analysis to the current pc.  This fixes the bug with the 'next'
	command.
	Correctly set the SP register of the previous frame (use call_length).
	(avr_frame_prev_register): Fix indentation.
	Correctly read PC from the stack on avr6 architectures.
	(avr_push_dummy_call): Fix indentation.
	(avr_gdbarch_init): Set call_length according to the architecture.

2009-06-15  Phil Muldoon  <[email protected]>

	* infcall.c (show_unwind_on_terminating_exception_p): New
	function.
	(call_function_by_hand): Create breakpoint and clean-up call for
	std::terminate.breakpoint. Add unwind_on_terminating_exception_p
	gate. Pop frame on breakpoint hit.
	(_initialize_infcall): Add add_setshow_boolean_cmd for
	unwind-on-terminating-exception.

2009-06-12  Kevin Buettner  <[email protected]>

	* dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
	`has_section_at_zero' flag from stripped objfile to separate,
	debug info only, objfile.

2009-06-12  Pedro Alves  <[email protected]>

	* exec.h (section_table_xfer_memory_partial): Improve description,
	mention SECTION_NAME.
	* exec.c (section_table_xfer_memory_partial): Remove stale
	description.

2009-06-11  Aleksandar Ristovski  <[email protected]>

	* nto-tdep.h (nto_generic_supply_gpregset)
	(nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
	* nto-tdep.c (nto_generic_supply_gpregset)
	(nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.

2009-06-11  Aleksandar Ristovski  <[email protected]>

	* i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
	(i386nto_sigcontext_addr): Change the way context address is calculated.
	(i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
	sc_sp_offset and set sc_reg_offset and sc_num_regs.

2009-06-11  Aleksandar Ristovski  <[email protected]>

	* i386-nto-tdep.c (i386_nto_target): Remove definition.
	(init_i386nto_ops): Use macros to set fields to global
	current_nto_target directly.
	(i386nto_init_abi): Remove unused nto_set_target call.
	* nto-tdep.h (nto_set_target): Remove unused declaration.
	* nto-tdep.c (nto_set_target): Remove unused function.

2009-06-11  Pedro Alves  <[email protected]>

	* breakpoint.c (break_command_really): Rename local variable
	breakpoint_chain to bkpt_chain.

2009-06-11  Aleksandar Ristovski  <[email protected]>

	Add support for XMM registers.
	* i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
	(i386nto_register_area): Correctly calculate offsets and sizes for
	all supported registers.

2009-06-11  Tom Tromey  <[email protected]>

	* eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
	'static' from local variable definitions.

2009-06-11  Pedro Alves  <[email protected]>

	* symtab.c (append_expanded_sal): Remove unused local variables.

2009-06-11  Pedro Alves  <[email protected]>

	* infrun.c (sched_multi): New global.
	(resume): If sched_multi is set, resume only threads of the
	current inferior.
	(prepare_to_proceed): Don't switch over to wait_ptid if we're
	resuming a different inferior, and sched_multi is off.
	(show_schedule_multiple): New.
	(_initialize_infrun): Register new "set schedule-multiple" command.
	* inferior.h (sched_multi): Declare.
	* NEWS: Mention new "schedule-multiple" setting.

2009-06-11  Pedro Alves  <[email protected]>

	* varobj.c (varobj_create): Properly restore the selected frame.

2009-06-05  Tom Tromey  <[email protected]>

	* inferior.c (print_inferior): Make a table, not a list.  Emit
	table headers.

2009-06-10  Jonas Maebe  <[email protected]>

	* darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
	darwin_wait (blocking wait).
	(darwin_kill_inferior): Likewise.

2009-06-10  Pedro Alves  <[email protected]>

	* infrun.c (handle_inferior_event): Update comment around trying
	to revert back to a stepping thread that has exited.

2009-06-10  Cary Coutant  <[email protected]>

	* dwarf2read.c (dwarf_decode_lines): Recognize and ignore
	DW_LNE_set_discriminator.

2009-06-10  Pierre Muller  <[email protected]>

	* breakpoint.c: ARI fixes.
	(create_overlay_event_breakpoint): Avoid assignment inside if statement.
	(print_one_breakpoint_location): Likewise.
	(create_longjmp_breakpoint): Likewise.
	(tracepoint_save_command): Likewise
	(bpstat_find_step_resume_breakpoint): No operator at end of line.
	(bpstat_stop_status): Likewise.
	(describe_other_breakpoints): Likewise.
	(hw_watchpoint_used_count): Likewise.
	(expand_line_sal_maybe): Likewise.
	(break_command_really): Likewise.
	(delete_command): Likewise.
	(do_enable_breakpoint): Likewise.
	(delete_trace_command): Likewise.
	(catch_exception_command_1): Likewise and remove extra parentheses.

2009-06-08  Pierre Muller  <[email protected]>

	* breakpoint.c (_initialize_breakpoint): Remove "bu" command alias of
	"ubreak" command that does not exist.

2009-06-08  Pierre Muller  <[email protected]>

	* cli/cli-decode.c (add_alias_cmd): Correct assertion.

2009-06-07  Pedro Alves  <[email protected]>

	* hppa-tdep.c (_initialize_hppa_tdep): Add declaration.

2009-06-07  Pedro Alves  <[email protected]>

	* procfs.h: New.
	* proc-utils.h (procfs_first_available): Don't declare here.
	* sol-thread.c: Include procfs.h instead of sys/procfs.h and
	proc-utils.h.
	* procfs.c: Include procfs.h.
	(procfs_target): Make it public.  Don't register
	procfs_can_use_hw_breakpoint here.
	(proc_set_watchpoint): Check for PCWATCH or PIOCSWATCH being
	defined instead of TARGET_HAS_HARDWARE_WATCHPOINTS.
	(procfs_can_use_hw_breakpoint): Remove check of
	TARGET_HAS_HARDWARE_WATCHPOINTS.
	(procfs_use_watchpoints): Register procfs_can_use_hw_breakpoint
	here.
	(_initialize_procfs): Don't add the procfs target here.

	* i386-sol2-nat.c: Include target.h and procfs.h.
	(_initialize_amd64_sol2_nat): Install the procfs target here,
	customized with watchpoints support.
	* irix5-nat.c: Include target.h.
	(_initialize_core_irix5): Rename to ...
	(_initialize_irix5_nat): ... this.  Install the procfs target
	here, customized with watchpoints support.
	* alpha-nat.c: Include procfs.h.
	(_initialize_core_alpha): Rename to...
	(_initialize_alpha_nat): ... this.  Install the procfs target
	here, customized with watchpoints support.
	* sparc-sol2-nat.c: Include target.h and procfs.h.
	(_initialize_sparc_sol2_nat): New.

	* config/i386/nm-i386sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
	* config/sparc/nm-sol2.h (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete.
	* config/mips/irix5.mh (NAT_FILE): Delete.
	* config/mips/irix6.mh (NAT_FILE): Delete.
	* config/mips/nm-irix5.h: Delete.

20009-06-07  Pedro  Alves  <[email protected]>

	* auxv.c (procfs_xfer_auxv): Change type of the `object' argument
	to enum target_object.  Cleanup comments.
	* auxv.h: Include "target.h".  Cleanup comments to not mention
	NATIVE_XFER_AUXV anymore.

2009-06-07  Pedro Alves  <[email protected]>

	* inferior.h (procfs_first_available): Move declaration to...
	* proc-utils.h: ... here.
	* sol-thread.c: Include procfs.h and proc-utils.h.

2009-06-07  Pedro Alves  <[email protected]>

	* inferior.h (proc_iterate_over_mappings): Delete declaration.
	* nto-tdep.h (proc_iterate_over_mappings): Delete declaration.
	* procfs.c (proc_iterate_over_mappings): Delete.

2009-06-07  Pedro Alves  <[email protected]>

	* target.h (struct target_ops): Make to_has_all_memory,
	to_has_memory, to_has_stack, to_has_registers and to_has_execution
	methods instead of variables.
	(target_has_all_memory_1, target_has_memory_1, target_has_stack_1)
	(target_has_registers_1, target_has_execution_1): Declare
	functions.
	(target_has_all_memory): Rewrite to call target_has_all_memory_1.
	(target_has_memory): Rewrite to call target_has_memory_1.
	(target_has_stack): Rewrite to call target_has_all_stack_1.
	(target_has_registers): Rewrite to call target_has_registers_1.
	(target_has_execution): Rewrite to call target_has_execution_1.
	(default_child_has_all_memory, default_child_has_memory)
	(default_child_has_stack, default_child_has_registers)
	(default_child_has_execution): Declare.
	(target_mark_running, target_mark_exited): Delete declarations.
	* target.c (default_child_has_all_memory,
	default_child_has_memory, default_child_has_stack,
	default_child_has_registers, default_child_has_execution): New.
	(target_has_all_memory_1, target_has_memory_1, target_has_stack_1,
	target_has_registers_1, target_has_execution_1): New.
	(add_target): Default the to_has_all_memory, to_has_all_memory,
	to_has_memory, to_has_stack, to_has_registers and to_has_execution
	callbacks to return 0.
	(update_current_target): Do not inherit to_has_all_memory,
	to_has_memory, to_has_stack, to_has_registers or to_has_execution.
	(target_mark_running, target_mark_exited): Delete.
	(memory_xfer_partial): Adjust.
	(target_read_memory, target_write_memory, target_search_memory):
	Dispatch to the the top-most target, not the flattened
	current_target.
	(target_info): Adjust.
	(init_dummy_target): Install return_zero as callback for
	to_has_all_memory, to_has_memory, to_has_stack, to_has_registers,
	to_has_execution.
	(set_maintenance_target_async_permitted): Use have_live_inferiors
	instead of target_has_execution.
	* target-memory.c (target_write_memory_blocks): Dispatch memory
	writes to the the top-most target, not the flattened
	current_target.

	* breakpoint.c (insert_breakpoints): Don't check for
	target_has_execution here.
	(update_global_location_list): Check if there are live inferiors
	to debug instead of target_has_execution.
	* infcmd.c (kill_command, detach_command): Check if there are
	inferiors instead of target_has_execution.
	* inferior.h (have_live_inferiors): Declare.
	* inferior.c (have_live_inferiors): New.
	* infrun.c (normal_stop): Don't check for target_has_execution to
	finish the thread states.
	* thread.c (is_thread_state, is_stopped, is_exited, is_running)
	(any_running, is_executing): Remove checks for
	target_has_execution.
	* top.c (kill_or_detach): Don't try to kill core inferiors.
	(quit_target): Don't check for target_has_execution.

	* corelow.c (core_has_memory, core_has_stack, core_has_registers):
	New.
	(init_core_ops): Install core_has_memory, core_has_stack and
	core_has_registers.
	* exec.c (exec_has_memory): New.
	(init_exec_ops): Install exec_has_memory.
	* remote.c (remote_add_inferior): Don't call target_mark_running.
	(remote_start_remote): Don't call target_mark_exited or call
	target_mark_running.
	(remote_open_1): Use have_inferiors instead of
	target_has_execution.  Don't use target_mark_exited.
	(init_remote_ops): Install deafult_child_has_all_memory,
	default_child_has_memory, default_child_has_stack,
	default_child_has_registers, default_child_has_execution.
	* bsd-kvm.c (bsd_kvm_return_one): New.
	(bsd_kvm_add_target): Register bsd_kvm_return_one as
	to_has_memory, to_has_stack and to_has_registers callbacks.
	* remote-m32r-sdi.c (m32r_return_one): New.
	(init_m32r_ops): Register it.
	* inf-child.c (inf_child_target): Adjust to register
	default_child_has_all_memory, default_child_has_memory,
	default_child_has_stack, default_child_has_registers,
	default_child_has_execution callbacks.
	* gnu-nat.c (init_gnu_ops): Likewise.
	* go32-nat.c (init_go32_ops): Likewise.
	* hpux-thread.c (init_hpux_thread_ops): Likewise.
	* monitor.c (init_base_monitor_ops): Likewise.
	* nto-procfs.c (init_procfs_ops): Likewise.
	* remote-mips.c (_initialize_remote_mips): Likewise.
	* windows-nat.c (init_windows_ops): Likewise.
	* remote-sim.c (gdbsim_create_inferior): Don't use
	target_mark_running or target_mark_exited.
	(gdbsim_mourn_inferior): Don't call target_mark_exited.
	(init_gdbsim_ops): Adjust to register
	default_child_has_all_memory, default_child_has_memory,
	default_child_has_stack, default_child_has_registers,
	default_child_has_execution callbacks.

	* linux-nat.c (linux_nat_xfer_partial): If reading memory, and
	there's no inferior selected, defer to a lower stratum.

2009-06-05  Tom Tromey  <[email protected]>

	* varobj.c (update_dynamic_varobj_children): Wrap error text in
	_().
	(install_visualizer): Likewise.
	(varobj_set_visualizer): Likewise.

2009-06-05  Marc Khouzam  <[email protected]>

	* mi/mi-main.c (mi_cmd_exec_continue)
	(mi_cmd_exec_interrupt): Adjust parsing of thread group
	ids to current reality, where they don't have any 'p' prefix.

2009-06-05  Aleksandar Ristovski  <[email protected]>

	* corelow.c (core_open): Check for core_gdbarch before calling
	gdbarch_target_signal_from_host.

2009-06-05  Tom Tromey  <[email protected]>

	* c-exp.y (parse_number): Don't use K&R definition.
	(yylex): Likewise.
	(yyerror): Likewise.

2009-06-04  Jan Kratochvil  <[email protected]>

	* varobj.c (varobj_update): Fix out of scope varobjs to not to change.

2009-06-04  Ulrich Weigand  <[email protected]>

	* symtab.h: Rename SYMBOL_OPS to SYMBOL_COMPUTED_OPS.
	* ax-gdb.c (gen_var_ref): Likewise.
	* findvar.c (read_var_value, symbol_read_needs_frame): Likewise.
	* printcmd.c (address_info): Likewise.
	* dwarf2loc.c (dwarf_expr_frame_base): Likewise.
	* dwarf2read.c (dwarf2_symbol_mark_computed): Likewise.
	* symtab.h: Rename struct symbol_ops to struct symbol_computed_ops.
	* dwarf2loc.h: Likewise.
	* dwarf2loc.c (dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Likewise.

	* symtab.h: (struct symbol_register_ops): New struct definition.
	(struct symbol): Make "ops" member a union of symbol_computed_ops and
	symbol_register_ops callback pointers.
	(SYMBOL_REGISTER_OPS): New macro.
	* tracepoint.c: Include "objfiles.h".
	(scope_info, collect_symbol): Use SYMBOL_REGISTER_OPS register_number
	callback to retrieve register numbers.
	* ax-gdb.c (gen_var_ref): Likewise.
	* findvar.c (read_var_value): Likewise.
	* printcmd.c (address_info): Likewise.

	* coffread.c (coff_reg_to_regnum): New function.
	(coff_register_funcs): New static variable.
	(process_coff_symbol): Do not call gdbarch_sdb_reg_to_regnum.
	Install SYMBOL_REGISTER_OPS callbacks.
	* mdebugread.c (mdebug_reg_to_regnum): New function.
	(mdebug_register_funcs): New static variable.
	(parse_symbol): Do not call gdbarch_ecoff_reg_to_regnum.
	Install SYMBOL_REGISTER_OPS callbacks.
	* stabsread.c (stab_reg_to_regnum): New function.
	(stab_register_funcs): New static variable.
	(define_symbol): Do not call gdbarch_stab_reg_to_regnum.
	Install SYMBOL_REGISTER_OPS callbacks.

2009-06-03  Doug Evans  <[email protected]>

	* symfile.c (reread_symbols): Reset psymtabs_addrmap to NULL
	after discarding its contents.

2009-06-03  Pedro Alves  <[email protected]>

	* target.c: Include "exec.h".
	(update_current_target): Don't inherit to_sections or
	to_sections_end.
	(target_get_section_table): New.
	(target_section_by_addr): Fetch the section table from the passed
	in target.
	(memory_xfer_partial): Handle unmapped overlay sections before
	anything else.  Get the overlay mapped address here.  Adjust to
	use section_table_xfer_memory_partial.
	(get_target_memory): Request a TARGET_OBJECT_RAW_MEMORY object
	instead of TARGET_OBJECT_MEMORY.
	(target_resize_to_sections): Delete.
	(remove_target_sections): Adjust to remove target sections from
	`current_target_sections', and use resize_section_table.
	* target.h (struct target_ops) <to_sections, to_sections_end>:
	Remove fields.
	<to_get_section_table>: New method.
	(xfer_memory, print_section_info): Delete declarations.
	(struct target_section_table): New type.
	(target_get_section_table): Declare.
	(target_resize_to_sections): Delete declaration.
	(remove_target_sections): Delete declaration.
	* bfd-target.c (target_bfd_xfer_partial): Get the section table
	from to_data.
	(target_bfd_get_section_table): New.
	(target_bfd_xclose): Adjust.
	(target_bfd_reopen): Store the section table in the to_data field.
	* corelow.c (core_data): New.
	(core_close): Adjust to release core_data and its sections.
	(core_open): Allocate core_data, and build its target sections
	table.
	(deprecated_core_resize_section_table): New.
	(core_files_info): Pass core_data to print_section_info.
	(core_xfer_partial): Adjust to use
	section_table_xfer_memory_partial for TARGET_OBJECT_MEMORY xfers.
	(init_core_ops): Do not install a deprecated_xfer_memory callback
	anymore.
	* solib.c (update_solib_list): Add the shared library sections
	to the current target sections table.
	* exec.c (current_target_sections_1): New global.
	(current_target_sections): New global.
	(exec_close_1): New function, refactored from exec_close.  Remove
	the exec_bfd's sections from the current target sections table.
	Adjust to not use to_sections.
	(exec_close): Remove all target sections.  Call exec_close_1.
	(exec_file_clear): Use exec_close_1 instead of unpushing the
	target.
	(exec_file_attach): Likewise.  Adjust to not use to_sections.  Add
	exec_bfd's sections to the current target sections table.  Don't
	push the exec_ops target here.
	(resize_section_table): New.
	(add_target_sections): New.
	(remove_target_sections): Moved here.
	(section_table_xfer_memory): Adjust to implement the xfer_partial
	interface, and rename to...
	(section_table_xfer_memory_partial): ... this, replacing the
	current function of that same name.
	(exec_get_section_table): New.
	(exec_xfer_partial): New.
	(xfer_memory): Delete.
	(print_section_info): Replace the target_ops parameter by a
	target_section_table parameter.
	(exec_files_info, set_section_command, exec_set_section_address):
	Adjust to use the current sections table.
	(init_exec_ops): Do not register a deprecated_xfer_memory
	callback.  Register to_xfer_partial and to_get_section_table
	callbacks.
	* infrun.c (handle_inferior_event): Update comments around
	solib_add.
	* rs6000-nat.c (xcoff_relocate_core): Adjust to use
	deprecated_core_resize_section_table.
	* exec.h (resize_section_table): Declare.
	(section_table_xfer_memory_partial): Add const char * argument.
	(remove_target_sections): Declare here.
	(add_target_sections): Declare.
	(print_section_info): Declare here.
	* gdbcore.h (deprecated_core_resize_section_table): Declare.

2009-06-03  Ulrich Weigand  <[email protected]>

	* value.h (struct internalvar): Remove.
	(get_internalvar_integer): Add prototype.
	(set_internalvar_integer): Add prototype.
	(clear_internalvar): Add prototype.

	* value.c (struct internalvar): Move here.  Add type member.  Remove
	endian member.  Add union_internalvar member instead of value member.
	(init_if_undefined_command): Use intvar->type.
	(create_internalvar): Do not initialize value/endian, but type.
	(create_internalvar_type_lazy): Call create_internalvar.
	(value_of_internalvar): Handle host-side internalvar contents.
	(set_internalvar_component): Likewise.
	(set_internalvar): Likewise.
	(get_internalvar_integer): New function.
	(clear_internalvar): Likewise.
	(set_internalvar_integer): Likewise.
	(preserve_values): Handle host-side internalvar contents.

	* breakpoint.c (set_breakpoint_count, set_tracepoint_count): Call
	set_internalvar_integer instead of set_internalvar.
	* findcmd.c (find_command): Likewise.
	* infrun.c (handle_inferior_event): Likewise.
	* source.c (forward_search_command, reverse_search_command): Likewise.
	* tracepoint.c (set_traceframe_num, set_tracepoint_num,
	set_traceframe_context): Likewise.

	* printcmd.c (x_command): Call clear_internalvar instead of
	set_internalvar.
	* tracepoint.c (set_traceframe_context): Likewise.
	
	* breakpoint.c (get_number_trailer): Call get_internalvar_integer
	instead of value_of_internalvar.
	* linespec.c (decode_dollar): Likewise.

	* expprint.c (dump_subexp_body_standard): Use internalvar_name
	instead of accessing internalvar private elements.
	* valops.c (value_assign): Copy from original source instead of
	accessing internalvar private elements.

2009-06-03  Ulrich Weigand  <[email protected]>

	* scm-lang.c (builtin_type_scm): Remove.
	(scm_lookup_name): Add GDBARCH parameter.  Use it instead of
	objfile architecture.  Use per-architecture builtin_scm_type instead
	of builtin_type_scm.
	(evaluate_exp): Pass expression architecture to scm_lookup_name.

	(scm_get_field): Add SIZE parameter.  Use it instead of 
	TYPE_LENGTH (builtin_type_scm).

	(build_scm_types): New function.
	(scm_type_data): New variable.
	(builtin_scm_type): New function.
	(_initialize_scheme_language): Do not initialize builtin_type_scm.
	Register build_scm_types as post-init function for scm_type_data.

	* scm-exp.c (scm_lreadr): Use per-architecture builtin_scm_type
	instead of builtin_type_scm.

	* scm-lang.h (SCM_CAR, SCM_CDR): Pass SCM_SIZE to scm_get_field.
	(scm_get_field): Add SIZE paramter.
	(scm_scmval_print): Remove prototype.
	(builtin_type_scm): Remove.
	(struct builtin_scm_type): Add structure definition.
	(builtin_scm_type): Add prototype.

	* scm-valprint.c (scm_inferior_print): Add TYPE parameter.  Use it
	instead of builtin_core_addr type; do not use objfile architecture.
	(scm_scmlist_print): Add TYPE parameter.  Use it to define SCM_SIZE.
	Pass type to scm_scmval_print.
	(scm_ipruk): Add TYPE parameter.  Use it to define SCM_SIZE.
	(scm_scmval_print): Make static.  Add TYPE parameter.  Use it to
	define SCM_SIZE.  Pass type to scm_ipruk and scm_scmlist_print.
	(scm_val_print): Pass type to scm_inferior_print and scm_scmval_print.

2009-06-03  Ulrich Weigand  <[email protected]>

	* mdebugread.c (mdebug_type_void, mdebug_type_char, mdebug_type_short,
	mdebug_type_int, mdebug_type_int_32, mdebug_type_int_64,
	mdebug_type_long_32, mdebug_type_long_64, mdebug_type_long_long_64,
	mdebug_type_unsigned_char, mdebug_type_unsigned_short,
	mdebug_type_unsigned_int_32, mdebug_type_unsigned_int_64,
	mdebug_type_unsigned_long_32, mdebug_type_unsigned_long_64,
	mdebug_type_unsigned_long_long_64, mdebug_type_adr_32,
	mdebug_type_adr_64, mdebug_type_float, mdebug_type_double,
	mdebug_type_complex, mdebug_type_double_complex,
	mdebug_type_fixed_dec, mdebug_type_float_dec, mdebug_type_string):
	Remove.

	(basic_type_data): New global variable.
	(basic_type): New function.
	(parse_type): Remove static basic type map map_bt.  Call basic_type
	to get basic types instead of using mdebug_type_ variables.

	(parse_symbol): Use builtin types instead of mdebug_type_ variables.
	(upgrade_type): Likewise.
	(parse_procedure): Likewise.
	(psymtab_to_symtab_1): Likewise.

	(_initialize_mdebugread): Do not initialize mdebug_type_ variables.
	Initialize basic_type_data.

2009-06-03  Ulrich Weigand  <[email protected]>

	* dfp.h (decimal_binop): Convert LEN_RESULT to input parameter.
	* dfp.c (promote_decimal): Remove.
	(decimal_binop): Convert LEN_RESULT to input parameter.
	Remove call to decimal_binop.
	(decimal_compare): Remove call to decimal_binop.

	* valarith.c (value_binop): Pass desired result type length
	to decimal_binop.

2009-06-01  Tristan Gingold  <[email protected]>

	* configure.tgt (avr): Set gdb_sim to use the simulator.

2009-05-29  Doug Evans  <[email protected]>

	* infrun.c (prepare_to_proceed): Document.  Assert !non_stop.
	If scheduler-locking is enabled, we're not going to be singlestepping
	any other previously stopped thread.

2009-05-29  Pedro Alves  <[email protected]>

	* mi/mi-interp.c (mi_on_resume): Initialize `count' to 0.

2009-05-29  Eli Zaretskii  <[email protected]>

	* i386-tdep.c (i386_go32_init_abi): Use SVR4 register numbering
	for stabs and COFF debug info.

2009-05-28  Pedro Alves  <[email protected]>

	* infrun.c (handle_inferior_event): When thread hoping, switch
	inferior_ptid to the event thread before removing breakpoints from
	the target.  If not stopping, also try to revert back to a thread
	that was doing a "next".  Check if that thread still exists before
	resuming.
	(currently_stepping_thread): Delete and merge with ...
	(currently_stepping): ... this.
	(currently_stepping_callback): Rename to ...
	(currently_stepping_or_nexting_callback): ... this, and also
	return true if the thread was stepping over a call (has a
	step-resume breakpoint).

2009-05-28  Tom Tromey  <[email protected]>

	* python/python.c (gdbpy_parameter): Rename.  Fix error message.
	(GdbMethods): Change "get_parameter" to "parameter".

2009-05-28  Pierre Muller  <[email protected]>
	    Paul Pluzhnikov  <[email protected]>

	* configure.ac (!have_libpython): Add python-prettyprint source
	and object files.
	* configure: Regenerate.
	* python/python-prettyprint.c: Move "#ifdef HAVE_PYTHON" before
	python headers.
	
2009-05-27  Vladimir Prus  <[email protected]>
	    Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>

	* mi/mi-main.c (mi_cmd_list_features): List "python" feature.
	* varobj.h (varobj_set_visualizer): Declare.
	(varobj_get_display_hint): Likewise.
	(varobj_update_result_t) <children_changed, value_installed>: New
	fields.
	* mi/mi-cmds.c (mi_cmds): Add var-set-visualizer.
	* mi/mi-cmds.h (mi_cmd_var_set_visualizer,
	mi_cmd_var_set_child_range): Declare.
	* mi/mi-cmd-var.c (mi_cmd_var_set_visualizer): New function.
	(mi_cmd_var_list_children): Emit display hint.
	(varobj_update_one): Emit display hint.  Handle dynamic children.
	* python/python.c (GdbMethods): Add "default_visualizer".
	* python/python-internal.h (apply_varobj_pretty_printer,
	gdbpy_get_varobj_pretty_printer, gdbpy_get_display_hint):
	Declare.
	(gdbpy_default_visualizer): Likewise.
	* varobj.c: Include python.h, python-internal.h.
	(PyObject): New typedef.
	(struct varobj) <children_requested, pretty_printer>: New fields.
	(varobj_create): Call install_default_visualizer.
	(instantiate_pretty_printer): New function.
	(varobj_set_display_format): Update.
	(varobj_get_display_hint): New function.
	(update_dynamic_varobj_children): New function.
	(varobj_get_num_children): Handle dynamic children.
	(varobj_list_children): Likewise.
	(install_new_value): Likewise.
	(varobj_add_child): New function.
	(install_visualizer): Likewise.
	(install_default_visualizer): Likewise.
	(varobj_set_visualizer): Likewise.
	(varobj_update): Handle dynamic children.
	(create_child): Use create_child_with_value.
	(create_child_with_value): New function.
	(value_get_print_value): Call pretty printer.  Add value_formatter
	argument.
	(c_value_of_variable): Update.
	(varobj_invalidate): Always free all_rootvarobj.
	* python/python-prettyprint.c (apply_varobj_pretty_printer): New
	function.
	(gdbpy_get_varobj_pretty_printer): Likewise.
	(gdbpy_default_visualizer): Likewise.

2009-05-27  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>
	    Phil Muldoon  <[email protected]>
	    Paul Pluzhnikov  <[email protected]>
	    Vladimir Prus  <[email protected]>

	* python/python-value.c (value_object_to_value): New function.
	* python/python-internal.h: Include frameobject.h.
	(gdbpy_children_cst, gdbpy_to_string_cst, gdbpy_display_hint_cst):
	Declare.
	(value_object_to_value): Declare.
	* printcmd.c (struct format_data) <raw>: New field.
	(last_format): Default to 0.
	(decode_format): Initialize val.raw.  Handle /r flag.
	(print_command_1): Initialize fmt.raw and opts.raw.
	(output_command): Likewise.
	(x_command): Fix initialization of fmt.format.  Initialize
	fmt.raw.
	(display_command): Initialize fmt.raw.
	(do_one_display): Set opts.raw.
	* python/python.c (gdbpy_to_string_cst, gdbpy_children_cst,
	gdbpy_display_hint_cst): New globals.
	(_initialize_python): Initialize them.  Set gdb.pretty_printers.
	* cp-valprint.c: Include python.h.
	(cp_print_value): Call apply_val_pretty_printer.
	* python/python.h (apply_val_pretty_printer): Declare.
	* stack.c (print_this_frame_argument_p): Remove.
	(print_frame_args): Compute summary flag.  Don't use
	print_this_frame_argument_p.
	* valprint.c: Include python.h.
	(user_print_options): Initialize new fields.
	(scalar_type_p): New function.
	(val_print): Handle 'raw' and 'summary' modes.  Call
	apply_val_pretty_printer.
	(value_print): Handle 'raw' mode.
	* valprint.h (struct value_print_options) <raw, summary>: New
	fields.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-prettyprint.o
	(SUBDIR_PYTHON_SRCS): Add python-prettyprint.c.
	(python-prettyprint.o): New target.
	* python/python-prettyprint.c: New file.

2009-05-27  Tom Tromey  <[email protected]>
	    Paul Pluzhnikov  <[email protected]>

	* mi/mi-main.c (mi_cmd_data_evaluate_expression): Use
	value_address.
	* cli/cli-dump.c (dump_value_to_file): Use value_address.
	* valprint.c (common_val_print): Likewise.
	* v850-tdep.c (v850_push_dummy_call): Use value_address.
	* tracepoint.c (encode_actions): Use value_address.
	* printcmd.c (print_formatted): Use value_address.
	(x_command): Likewise.
	* p-valprint.c (pascal_object_print_static_field): Use
	value_address.
	* mn10300-tdep.c (mn10300_push_dummy_call): Use value_address.
	* mips-tdep.c (mips_eabi_push_dummy_call): Use value_address.
	* m32r-tdep.c (m32r_push_dummy_call): Use value_address.
	* jv-valprint.c (java_value_print): Use value_address.
	* infcall.c (find_function_addr): Use value_address.
	* gnu-v3-abi.c (gnuv3_rtti_type): Use value_address.
	* gnu-v2-abi.c (gnuv2_value_rtti_type): Use value_address.
	* frv-tdep.c (frv_push_dummy_call): Use value_address.
	* frame.c (frame_register_unwind): Use value_address.
	(frame_unwind_register_value): Likewise.
	* darwin-nat-info.c (info_mach_region_command): Use
	value_address.
	* cp-valprint.c (cp_print_static_field): Use value_address.
	* c-valprint.c (c_value_print): Use value_address.
	* breakpoint.c (update_watchpoint): Use value_address.
	(can_use_hardware_watchpoint): Likewise.
	* ada-valprint.c (ada_val_print_1): Use value_address.
	(ada_value_print): Likewise.
	* ada-tasks.c (read_fat_string_value): Use value_address.
	* jv-lang.c (java_link_class_type): Use set_value_address.
	(java_link_class_type): Likewise.
	(get_java_utf8_name): Use value_address.
	(type_from_class): Likewise.
	(java_link_class_type): Likewise.
	* findvar.c (value_of_register): Use set_value_address.
	(read_var_value): Likewise.
	(read_var_value): Likewise.
	* eval.c (evaluate_subexp_standard): Use set_value_address.
	(evaluate_subexp_standard): Use value_address.
	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Use set_value_address.
	* ada-lang.c (coerce_unspec_val_to_type): Use set_value_address.
	(ada_value_primitive_packed_val): Likewise.
	(ensure_lval): Likewise.
	(thin_data_pntr): Use value_address.
	(desc_bounds): Likewise.
	(ada_value_primitive_packed_val): Likewise.
	(value_assign_to_component): Likewise.
	(ensure_lval): Likewise.
	(make_array_descriptor): Likewise.
	(ada_to_fixed_value): Likewise.
	(unwrap_value): Likewise.
	* value.c (deprecated_value_address_hack): Remove.
	(value_address): New function.
	(value_raw_address): Likewise.
	(set_value_address): Likewise.
	(value_fn_field): Use set_value_address.
	(value_from_contents_and_address): Likewise.
	(value_fn_field): Likewise.
	(allocate_value_lazy): Don't use VALUE_ADDRESS.
	(value_as_address): Use value_address.
	(value_static_field): Likewise.
	* valops.c (search_struct_field): Use set_value_address.
	(value_at): Likewise.
	(value_at_lazy): Likewise.
	(value_repeat): Likewise.
	(value_cast_structs): Use value_address.
	(value_cast): Likewise.
	(value_fetch_lazy): Likewise.
	(value_assign): Likewise.
	(value_repeat): Likewise.
	(address_of_variable): Likewise.
	(value_coerce_array): Likewise.
	(value_coerce_function): Likewise.
	(value_addr): Likewise.
	(search_struct_field): Likewise.
	(search_struct_method): Likewise.
	(find_method_list): Likewise.
	(value_struct_elt_for_reference): Likewise.
	(value_full_object): Likewise.
	* jv-valprint.c (java_value_print): Use set_value_address.
	* value.h (deprecated_value_address_hack): Remove.
	(VALUE_ADDRESS): Remove.
	(value_address): Declare.
	(value_raw_address): Declare.
	(set_value_address): Declare.

2009-05-27  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>
	    Phil Muldoon  <[email protected]>
	    Paul Pluzhnikov  <[email protected]>

	* python/python.c (_initialize_python): Call
	gdbpy_initialize_types.
	(GdbMethods): Add "lookup_type".
	* python/python-value.c (value_object) <type>: New field.
	(valpy_dealloc): Decref type.
	(valpy_new): Initialize type.
	(valpy_get_type): New function.
	(value_to_value_object): Initialize type.
	(valpy_cast): New function.
	(value_object_getset): Add "type".
	(value_object_methods): Add "cast".
	* python/python-internal.h (type_to_type_object): Declare.
	(type_object_to_type): Likewise.
	(gdbpy_initialize_types): Likewise.
	(gdbpy_lookup_type): Declare.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-type.o.
	(SUBDIR_PYTHON_SRCS): Add python-type.c.
	(python-type.o): New target.
	* python/python-type.c: New file.

2009-05-27  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>
	    Phil Muldoon  <[email protected]>

	* python/python.c: Include objfiles.h, observer.h.
	(gdbpy_auto_load): New global.
	(gdbpy_current_objfile): Likewise.
	(GDBPY_AUTO_FILENAME): New define.
	(gdbpy_new_objfile): New function.
	(gdbpy_get_current_objfile): Likewise.
	(gdbpy_objfiles): Likewise.
	(_initialize_python): Add "maint set auto-load".  Call
	gdbpy_initialize_objfile.  Attach objfile observer.
	(GdbMethods): New methods current_objfile, objfiles.
	* python/python-objfile.c: New file.
	* python/python-internal.h (objfile_to_objfile_object): Declare.
	(objfpy_get_printers): Likewise.
	(gdbpy_initialize_objfile): Likewise.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-objfile.o.
	(SUBDIR_PYTHON_SRCS): Add python-objfile.c.
	(python-objfile.o): New target.

2009-05-27  Pedro Alves  <[email protected]>

	* infrun.c (follow_exec): Clear the stop_requested flag.
	* linux-nat.c (linux_handle_extended_wait) <PTRACE_EVENT_EXEC>:
	Add debug output.

2009-05-27  Aleksandar Ristovski  <[email protected]>

	* nto-procfs.c (get_regset): Pass correct pointer.

2009-05-26  Doug Evans  <[email protected]>

	* dwarf2read.c (follow_die_ref): Add comment.
	(dwarf2_mark_helper): Tweak comment.
	(dwarf2_mark): Move description to its proper place.

2009-05-25  Pierre Muller  <[email protected]>

	* procfs.c (procfs_wait): Add options parameter.

2009-05-24  Doug Evans  <[email protected]>

	Global renaming of find_thread_pid to find_thread_ptid.
	* gdbthread.h (find_thread_ptid): Renamed from find_thread_pid.
	* thread.c (find_thread_ptid): Renamed from find_thread_pid.
	All callers updated.

	* infrun.c (follow_fork): Initialize new step_* locals
	to avoid "may be used uninitialized" warnings.

2009-05-24  Pedro Alves  <[email protected]>

	* inflow.c (copy_terminal_info): Deep copy `run_terminal'.

2009-05-24  Pedro Alves  <[email protected]>

	* gdbthread.h (struct thread_info): New `pending_follow' field.
	* thread.c (new_thread): New function.
	(add_thread_silent): Use it.
	* breakpoint.c (internal_breakpoint_number): New global, moved
	from inside...
	(create_internal_breakpoint): ... this.
	(clone_momentary_breakpoint): New.
	* breakpoint.h (clone_momentary_breakpoint): Declare.
	* infrun.c (nullify_last_target_wait_ptid): Move declaration
	higher.
	(pending_follow): Delete.
	(follow_fork): Handle pending follow fork event here.  Moved the
	preserving of thread stepping state here.
	(resume): Don't handle pending follow fork events here.  Only
	install the inferior's terminal modes if we're about to resume it.
	(proceed): Handle possible pending follow fork events here.
	(init_wait_for_inferior): No need to clear pending_follow anymore,
	it's gone.
	(handle_inferior_event): Adjust to per-thread `pending_follow'.
	Call `follow_fork' to handle following the fork.  If the
	follow-fork is cancelled, stop stepping.
	* linux-nat.c (linux_child_follow_fork): Adjust to per-thread
	`pending_follow' events.  Remove code that handled preserving the
	thread stepping state.
	* inf-ptrace.c (inf_ptrace_follow_fork): Ditto.
	* inf-ttrace.c (inf_ttrace_follow_fork): Ditto.

2009-05-24  Pierre Muller  <[email protected]>

	* symfile.c (add_shared_symbol_files_command): Remove
	prototype and function.
	(_initialize _symfile): Move "add-shared-symbol-files"
	command and "assf" alias.
	* windows-nat.c (_initialize_windows_nat): to here.
	Change "add-shared-symbol-files" to alias.
	
	* config/i386/cygwin.mh: Remove NAT_FILE.
	* config/i386/mingw.mh: Remove NAT_FILE.
	* config/i386/mingw64.mh: Remove NAT_FILE.
	* config/i386/nm-cygwin.h: Remove file.
	* config/i386/nm-cygwin64.h: Remove file.

2009-05-24  Hui Zhu  <[email protected]>

	* i386-linux-tdep.c (I386_LINUX_RECORD_SIZE_*,
	I386_LINUX_RECORD_IOCTL_*,
	I386_LINUX_RECORD_FCNTL_*) Removed.
	(i386_linux_init_abi): Change size of record from macros to
	numbers.

2009-05-24  Hui Zhu  <[email protected]>

	* i386-linux-tdep.c (i386_linux_init_abi): Remove size_char.
	* linux-record.c (record_linux_system_call): Ditto.
	* linux-record.h (linux_record_tdep): Ditto.

2009-05-23  Jan Kratochvil  <[email protected]>

	Replace the savestring calls by xstrdup calls where possible.
	* breakpoint.c (condition_command, set_raw_breakpoint)
	(create_catchpoint, update_breakpoint_locations): Replace the
	savestring calls by xstrdup calls where possible.
	* buildsym.c (start_subfile, patch_subfile_names, record_debugformat)
	(record_producer): Likewise.
	* coffread.c (coff_start_symtab, complete_symtab): Likewise.
	* corefile.c (set_gnutarget): Likewise.
	* dbxread.c (add_new_header_file): Likewise.
	* demangle.c (set_demangling_command, set_demangling_style): Likewise.
	* event-top.c (push_prompt, pop_prompt, command_line_handler)
	(set_async_prompt): Likewise.
	* infcmd.c (set_inferior_io_terminal, attach_command_post_wait):
	Likewise.
	* language.c (set_language_command, _initialize_language): Likewise.
	* linespec.c (decode_line_2): Likewise.
	* rs6000-nat.c (add_vmap): Likewise.
	* top.c (set_prompt, init_history, init_main): Likewise.
	* tracepoint.c (stringify_collection_list): Likewise.
	* varobj.c (varobj_create): Remove variable expr_len.  Replace the 
	savestring calls by xstrdup calls where possible.
	(value_of_root, c_name_of_variable, c_describe_child): Replace the
	savestring calls by xstrdup calls where possible.
	* xcoffread.c (complete_symtab): Likewise.
	* cli/cli-script.c (build_command_line, define_command): Likewise.
	* cli/cli-setshow.c (do_setshow_command): Likewise.

2009-05-23  Jan Kratochvil  <[email protected]>

	Remove already unreachable code.
	* varobj.c (varobj_get_handle): Fix comment when error is called.
	All callers updated.

2009-05-23  Eli Zaretskii  <[email protected]>

	* README (`configure' options): Document GDB-specific options to
	`configure'.

	* symtab.c (skip_prologue_using_lineinfo): New function.
	(find_function_start_sal): Use it to get to the first line of
	function's body that has an entry in the lineinfo table.

	* symmisc.c (dump_symtab): Switch the current language to
	the language of the symtab we are dumping only if the symtab's
	language is neither language_auto nor language_unknown.

	* coffread.c (coff_symtab_read): Set language_minimal as the
	language for the "_globals_" pseudo-file.
	(process_coff_symbol): Set the symbol's language to the language
	of current_subfile.

2009-05-22  Pedro Alves  <[email protected]>

	* target.h (struct section_table): Rename to ...
	(struct target_section): ... this.
	* exec.c: Adjust all references.
	* exec.h: Adjust all references.
	* nto-tdep.c: Adjust all references.
	* nto-tdep.h: Adjust all references.
	* ppc-linux-tdep.c: Adjust all references.
	* rs6000-nat.c: Adjust all references.
	* s390-tdep.c: Adjust all references.
	* solib-darwin.c: Adjust all references.
	* solib-frv.c: Adjust all references.
	* solib-irix.c: Adjust all references.
	* solib-null.c: Adjust all references.
	* solib-osf.c: Adjust all references.
	* solib-pa64.c: Adjust all references.
	* solib-som.c: Adjust all references.
	* solib-sunos.c: Adjust all references.
	* solib-svr4.c: Adjust all references.
	* solib-target.c: Adjust all references.
	* solib.c: Adjust all references.
	* solist.h: Adjust all references.
	* symfile.c: Adjust all references.
	* symfile.h: Adjust all references.
	* target.c: Adjust all references.

2009-05-22  Hui Zhu  <[email protected]>

	Add sys_fcntl argument interfaces to linux_record_tdep.

	* linux-record.h (linux_record_tdep): Add fcntl_F_GETLK,
	fcntl_F_GETLK64, fcntl_F_SETLK64 and fcntl_F_SETLKW64 to be
	interfaces.
	* i386-linux-tdep.c (I386_LINUX_RECORD_FCNTL_F_GETLK,
	I386_LINUX_RECORD_FCNTL_F_GETLK64,
	I386_LINUX_RECORD_FCNTL_F_SETLK64,
	I386_LINUX_RECORD_FCNTL_F_SETLKW64): New macros. The values
	of I386 Linux sys_fcntl arguments.
	(i386_linux_init_abi): Set macros values to linux_record_tdep.
	* linux-record.c (record_linux_system_call): Change to use
	the interface in linux_record_tdep in sys_fcntl and
	sys_fcntl64.

	* linux-record.c (record_linux_system_call): Fix the process
	record build error about type in CYGWIN.

2009-05-22  Pedro Alves  <[email protected]>

	* inflow.c (kill_command): Delete left over static declaration.

2009-05-22  Pedro Alves  <[email protected]>

	* bfd-target.c: Don't include gdb_assert.h or gdb_string.h.
	Include exec.h.
	(struct section_closure): Delete.
	(add_to_section_table): Delete.
	(build_target_sections_from_bfd): Delete.
	(target_bfd_xfer_partial): Use section_table_xfer_memory_partial.
	(target_bfd_reopen): Use build_section_table.
	* exec.c (xfer_memory): Move most code except for overlay
	debugging support from here...
	(section_table_xfer_memory): ... to this new function.
	(section_table_xfer_memory_partial): New.
	* exec.h (section_table_xfer_memory_partial): Declare.
	* bfd-target.h (build_target_sections_from_bfd): Delete
	declaration.

2009-05-22  Pedro Alves  <[email protected]>

	* remote.c (compare_sections_command): Don't declare exec_bfd.
	* tracepoint.c: Include "gdbcore.h".
	(remote_set_transparent_ranges): Don't declare exec_bfd.

2009-05-21  Pedro Alves  <[email protected]>

	* aix-thread.c (init_aix_thread_ops): Whitespace.

2009-05-21  Pedro Alves  <[email protected]>

	* dec-thread.c (dec_thread_wait): Add options parameter.  Use it
	to call the to_wait method in the target beneath.
	* remote-m32r-sdi.c (m32r_wait): Add options parameter.

2009-05-21  Joel Brobecker  <[email protected]>

	* aix-thread.c (aix_thread_wait): Add options parameter.  Use it
	to call the to_wait method in the target_beneath.

2009-05-21  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_nat_terminal_inferior)
	(linux_nat_terminal_ours): Don't check sync_execution.
	* remote.c (remote_terminal_inferior, remote_terminal_ours):
	Don't check sync_execution.  Update comments.
	* target.c (target_terminal_inferior): New.
	* target.h (target_terminal_inferior): Delete macro, and declare
	as function.
	* event-top.c (async_disable_stdin): Make idempotent.  Don't give
	the target the terminal here.
	* inflow.c (terminal_ours_1): Don't return early without setting
	`terminal_is_ours'.

2009-05-21  Pedro Alves  <[email protected]>

	* target.h (TARGET_WNOHANG): New.
	* target.c (target_wait): Add `options' argument.  Adjust.
	(struct target_ops) <to_wait>: Add `options' argument.
	(target_wait): Add `options' argument.
	* infrun.c (wait_for_inferior): Pass 0 as options to
	target_wait (blocking wait).
	(fetch_inferior_event): Pass TARGET_WNOHANG as options to
	target_wait.
	* fork-child.c (startup_inferior): Pass 0 as options to
	target_wait (blocking wait).
	* linux-nat.c (linux_nat_create_inferior): Remove async masking.
	(linux_nat_wait_1): Add `target_options' argument.  Use it instead
	of checking on target_can_async_p.
	(linux_nat_wait): Add `target_options' argument.  Adjust.
	* remote.c (remote_wait_ns): Add `options' argument.  Adjust to
	check on TARGET_WNOWAIT instead of checking on remote_is_async_p.
	(remote_wait_as): Add `options' argument.  Adjust to check on
	TARGET_WNOWAIT instead of checking on remote_is_async_p.  If doing
	a blocking wait, keep waiting until an interesting event comes
	out.
	(remote_wait): Add `options' argument.  Don't loop here if the
	target is in async mode, and a blocking wait has been requested.

	* top.c (deprecated_target_wait_hook): Add `options' argument.
	* linux-thread-db.c (thread_db_wait): Add `options' argument, and
	pass it down to the layer beneath.
	* inf-ptrace.c (inf_ptrace_wait): Add `options' argument.
	* record.c (record_beneath_to_wait): Add `options' argument.
	(record_wait): Add `options' argument, and pass it down to the
	layer beneath.
	* bsd-uthread.c (bsd_uthread_wait): Add `options' argument.
	* darwin-nat.c (darwin_wait): Likewise.
	* defs.h (deprecated_target_wait_hook): Likewise.
	* gnu-nat.c (gnu_wait): Add `options' argument.
	* go32-nat.c (go32_wait): Likewise.
	* hpux-thread.c (hpux_thread_wait): Add `options' argument, and
	pass it down to the layer beneath.
	* inf-ttrace.c (inf_ttrace_wait): Add `options' argument.
	* monitor.c (monitor_wait): Likewise.
	* nto-procfs.c (procfs_wait): Likewise.
	* remote-mips.c (mips_wait): Add `options' argument.
	* remote-sim.c (gdbsim_wait): Likewise.
	* rs6000-nat.c (rs6000_wait): Add `options' argument.
	* sol-thread.c (sol_thread_wait): Add `options' argument, and pass
	it down to the layer beneath.
	* spu-linux-nat.c (spu_child_wait): Add `options' argument.
	* windows-nat.c (windows_wait): Likewise.
	* tui/tui-hooks.c (tui_target_wait_hook): Likewise.  Adjust.

2009-05-21  Pedro Alves  <[email protected]>

	* mi/mi-interp.c (mi_on_resume): Account for whole process
	resumes.

2009-05-21  Jan Kratochvil  <[email protected]>

	* m2-exp.y (MAX_FUNC): Fix trailing UNOP_MAX.

2009-05-21  Jan Kratochvil  <[email protected]>

	* dwarf2read.c (set_cu_language): Recognize also DW_LANG_C99.

2009-05-21  Jan Kratochvil  <[email protected]>

	Fix parsing DW_AT_const_value using DW_FORM_string.
	* dwarf2read.c (dwarf2_const_value <DW_FORM_string>): New.

2009-05-20  Joel Brobecker  <[email protected]>

	* aix-thread.c (giter_count): Do not count the main thread.
	(giter_accum): Do not include the main thread.

2009-05-19  Jan Kratochvil  <[email protected]>

	Remove the PROT parameter from openp.
	* source.c (openp): Remove the parameter PROT.  Assertion check MODE.
	defs.h (openp): Update the prototype.
	Update all the openp callers.

2009-05-19  Pedro Alves  <[email protected]>

	* inflow.c (kill_command): Moved to infcmd.c.
	(_initialize_inflow): Don't add the "kill" command or clear
	inferior_ptid here.
	* infcmd.c (kill_command): Moved here from inflow.c.
	(_initialize_infcmd): Add the "kill" command here.

2009-05-19  Pedro Alves  <[email protected]>

	* fork-child.c: Don't include frame.h.  Include terminal.h.
	(fork_inferior): Call new_tty_postfork after forking adn adding
	the child to the inferior list.
	* inferior.h (new_tty_prefork, gdb_has_a_terminal): Don't declare
	here.
	* inflow.c (struct terminal_info): Remove const qualifier from
	`run_terminal' field.
	(inferior_thisrun_terminal): Tweak comment.
	(inflow_inferior_exit): Release the `run_terminal' field.
	(copy_terminal_info): New function.
	(new_tty_postfork): New function.
	* terminal.h (new_tty_prefork, new_tty, new_tty_postfork,
	(copy_terminal_info, gdb_has_a_terminal, gdb_setpgid): Declare.
	* inf-ptrace.c: Include terminal.h.
	(inf_ptrace_follow_fork): Copy the parent's terminal info to the
	child.
	* linux-nat.c: Include terminal.h.
	(linux_child_follow_fork): Copy the parent's terminal info to the
	child.
	* inf-ttrace.c: Include terminal.h.
	(inf_ttrace_follow_fork): Copy the parent's terminal info to the
	child.

2009-05-19  Pedro Alves  <[email protected]>

	* breakpoint.c (insert_breakpoints, breakpoint_init_inferior)
	(update_global_location_list): Use gdbarch_has_global_breakpoints
	instead of gdbarch_has_global_solist and
	target_supports_multi_process.
	* dicos-tdep.c (dicos_init_abi): Set
	gdbarch_has_global_breakpoints.
	* gdbarch.sh (has_global_solist): Update comment.
	(has_global_breakpoints): New.
	* remote.c (remote_start_remote): Use
	gdbarch_has_global_breakpoints instead of
	gdbarch_has_global_solist.
	* target.c (target_detach): Use gdbarch_has_global_breakpoints
	instead of gdbarch_has_global_solist.
	* infcmd.c (attach_command): Use gdbarch_has_global_solist instead
	of target_supports_multi_process.

2009-05-18  Paul Pluzhnikov  <[email protected]>

	* objc-lang.c (find_methods): Plug a small memory leak.

2009-05-18  Pedro Alves  <[email protected]>

	* solib-svr4.c: Include observer.h.
	(debug_base, debug_loader_offset_p, debug_loader_offset)
	(debug_loader_name, main_lm_addr): Move these globals...
	(struct svr4_info): ... into this new structure.
	(svr4_info_p): New typedef.
	(svr4_info): New global.
	(get_svr4_info, remove_svr4_info, solib_svr4_inferior_exit): New
	functions.
	(locate_base, solib_svr4_r_map, solib_svr4_r_brk)
	(solib_svr4_r_ldsomap): Add svr4_info argument.  Adjust to
	per-inferior svr4.
	(open_symbol_file_object): Adjust to per-inferior svr4.
	(svr4_default_sos, svr4_current_sos, svr4_fetch_objfile_link_map):
	Ditto.
	(enable_break): Add svr4_info argument.  Adjust to per-inferior
	svr4.
	(enable_break, svr4_solib_create_inferior_hook, svr4_clear_solib):
	Adjust to per-inferior svr4.
	(_initialize_svr4_solib): Install the solib_svr4_inferior_exit
	observer.

2009-05-18  Pedro Alves  <[email protected]>

	* linux-nat.h (linux_proc_get_tgid): Declare.
	* linux-nat.c (linux_proc_get_tgid): New.
	* linux-thread-db.c (struct thread_db_info): New field
	`need_stale_parent_threads_check'.
	(add_thread_db_info): Set it.
	(find_new_threads_callback): Ignore stale fork parent threads.
	(thread_db_resume): New.
	(init_thread_db_ops): Install thread_db_resume.

2009-05-18  Pedro Alves  <[email protected]>

	* fork-child.c (fork_inferior): Only reset the thread list if this
	is the first inferior.
	(startup_inferior): If the target support multi-process, tell it
	to resume only the new process.
	* linux-nat.c (num_lwps): Delete global.
	(purge_lwp_list): New function.
	(num_lwps): New function.
	(add_lwp, delete_lwp): Adjust.
	(ptid_match): New.
	(iterate_over_lwps): Add filter argument.  Handle it.
	(linux_nat_attach): Remove FIXME note.
	(linux_nat_detach): Adjust to iterate over threads of the inferior
	we're detaching from.  Adjust to num_lwps being a function.  Don't
	assume the head of the lwp list is the main thread of the process
	we're detaching from.  Don't destroy the LWP list.
	(resume_callback): Add debug output.
	(linux_nat_resume): Handle resuming a single inferior.  Allow a
	wildcard resume in non-stop mode.
	(linux_handle_extended_wait): Don't assume inferior_ptid is the
	correct inferior of the parent LWP.
	(status_callback): Also check lp->waitstatus.
	(select_event_lwp): Add new filter parameter.  Handle it.
	(linux_nat_filter_event): Adjust to num_lwps being a function.
	(linux_nat_wait_1): When adding the first lwp of the inferior, use
	an is_lwp check instead of checking for the number of lwps.
	(linux_nat_wait_1): Handle waiting for a specific tgid.  Handle
	pending process exit statuses.
	(linux_nat_mourn_inferior): Don't destroy all the LWP info.
	Instead delete LWPs of the inferior that we're mourning.  Don't
	unregister from the event loop here.
	(linux_nat_pid_to_str): Use `num_lwps'.
	(linux_nat_make_corefile_notes): Adjust to walk over lwps of a
	single inferior.
	(linux_nat_is_async_p): Check if async was masked out.
	(linux_multi_process): New global.
	(linux_nat_supports_multi_process): New.
	(linux_nat_stop_lwp): Remove LWP filtering.  It is done by the
	caller.
	(linux_nat_stop): Adjust to make iterate_over_lwps itself do the
	LWP filtering.
	(linux_nat_close): New.
	(linux_nat_add_target): Register linux_nat_close and
	linux_nat_supports_multi_process.
	* linux-nat.h (iterate_over_lwps): Add filter argument.
	* linux-thread-db.c (thread_db_handle): Delete.
	(proc_handle, thread_agent, td_init_p, td_ta_new_p)
	(td_ta_map_id2thr_p, td_ta_map_lwp2thr_p, td_ta_thr_iter_p)
	(td_ta_event_addr_p, td_ta_set_event_p, td_ta_event_getmsg_p)
	(td_thr_validate_p, td_thr_get_info_p, td_thr_event_enable_p)
	(td_thr_tls_get_addr_p, td_create_bp_addr, td_death_bp_addr): No
	longer globals, moved to...
	(struct thread_db_info): ... this new structure.
	(thread_db_list): New.
	(add_thread_db_info, get_thread_db_info, delete_thread_db_info):
	New.
	(have_threads_callback): Filter out threads of all inferiors but
	the one specified by the ARGS argument.
	(have_threads): Add ptid argument specifying the inferior we're
	interested in.  Handle it.
	(struct thread_get_info_inout): New.
	(thread_get_info_callback, thread_from_lwp): Adjust to use it.
	(thread_db_attach_lwp): Check that inferior of the passed in
	thread is using thread-db.  Adjust.
	(enable_thread_event): Remove thread_agent parameter.  Instead,
	get it from the per-inferior thread-db info.
	(dladdr_to_soname): Move higher up.
	(enable_thread_event_reporting): Adjust to use per-inferior
	thread-db info.
	(try_thread_db_load_1): Replace `handle' parameter by a
	thread_db_info parameter.  Adjust to use per-inferior thread-db
	info.
	(try_thread_db_load): Adjust to use per-inferior thread-db info.
	(thread_db_load, disable_thread_event_reporting): Ditto.
	(check_for_thread_db): Remove conditional reporting of which
	libthread_db is in use.
	(thread_db_new_objfile): Add comment about inferior_ptid.
	(attach_thread): Adjust to use per-inferior thread-db info.
	(thread_db_detach): Adjust to use per-inferior thread-db info.
	Remove thread event breakpoints of the current inferior.  Only
	unpush the thread-db target if there are no more processes using
	it.
	(check_event): Adjust to use per-inferior thread-db info.
	(thread_db_wait): Adjust to use per-inferior thread-db info.  Only
	unpush the thread-db target if there are no more processes using
	it.
	(thread_db_mourn_inferior): Adjust to use per-inferior thread-db
	info.  Mark breakpoints of the current inferior out before
	deleting them.  Only unpush the thread-db target if there are no
	more processes using it.
	(find_new_threads_callback): Adjust to use per-inferior thread_db
	info.
	(thread_db_find_new_threads_1): Add new ptid argument.  Adjust to
	use per-inferior thread-db info.
	(thread_db_find_new_threads): Adjust to use per-inferior thread-db
	info.
	(thread_db_get_thread_local_address): Adjust.
	(thread_db_get_ada_task_ptid): Adjust.
	* inf-ptrace.c (inf_ptrace_mourn_inferior): Only unpush the target
	if there no more processes left to debug.
	* thread.c (set_running, set_executing): Handle resuming all
	threads of a single inferior.
	* mi/mi-interp.c (mi_output_running_pid): New.
	(mi_inferior_count): New.
	(mi_on_resume): For backwards compatibility, if resuming all
	threads of an inferior, and there is only one inferior, output
	"all".

2009-05-18  Ulrich Weigand  <[email protected]>

	* ada-lang.c (ada_find_any_type): Move check for primitive types ...
	(to_fixed_range_type): ... to here.

2009-05-18  Ulrich Weigand  <[email protected]>

	* ada-lang.c (desc_data_type): Remove, replace by ...
	(desc_data_target_type): ... this.
	(thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
	(ada_is_array_descriptor_type): Likewise.
	(ada_type_of_array): Likewise.
	(ada_coerce_to_simple_array_type): Likewise.
	(ada_array_element_type): Likewise.

2009-05-18  Ulrich Weigand  <[email protected]>

	* ada-valprint.c (ada_val_print_1): Use val_print_string to print
	result of ada_vax_float_print_function inferior call.

2009-05-18  Ulrich Weigand  <[email protected]>

	* ada-lang.c (ada_coerce_to_simple_array_type): Reimplement to
	avoid creating a dummy value.

2009-05-18  Ulrich Weigand  <[email protected]>

	* p-valprint.c (pascal_val_print): Use extract_typed_address
	to extract reference value.

2009-05-18  Ulrich Weigand  <[email protected]>

	* doublest.c (NAN): Remove unused define.
	(extract_floating_by_length, deprecated_extract_floating): Remove.
	(store_floating_by_length, deprecated_store_floating): Remove.
	(extract_typed_floating): Do not call extract_floating_by_length.
	(store_typed_floating): Do not call store_floating_by_length.
	(convert_typed_floating): Remove redundant assertions.
	* doublest.h (deprecated_extract_floating): Remove.
	(deprecated_store_floating): Remove.
	* sh64-tdep.c (sh64_register_convert_to_raw): Call
	extract_typed_floating instead of deprecated_extract_floating.

2009-05-18  Jon Beniston <[email protected]>
        
        * MAINTAINERS: Add lm32 target.        
        * Makefile.in: Add lm32 dependencies.        
        * NEWS: Indicate lm32 is a new target.
        * configure.tgt: Add lm32 targets.
        * lm32-tdep.c: New file.

2009-05-18  Pedro Alves  <[email protected]>

	* corelow.c (core_open): Flush the register cache before doing
	anything with registers.

2009-05-18  Pedro Alves  <[email protected]>

	* inflow.h (our_process_group): Remove declaration.
	(inferior_process_group): Delete global variable declaration.
	(inferior_process_group): New function declaration.
	* inflow.c: Include observer.h.
	(inferior_ttystate, our_ttystate, tflags_inferior, tflags_ours):
	Delete.
	(struct terminal_info): New struct.
	(our_terminal_info): New global.
	(inferior_process_group): New function.
	(inferior_thisrun_terminal): Extend description comment.
	(gdb_has_a_terminal): Adjust to write to our_terminal_info fields
	instead of globals.
	(terminal_init_inferior_with_pgrp): Adjust to per-inferior
	terminal settings.
	(terminal_inferior): Ditto.
	(terminal_ours_1): Ditto.
	(inflow_new_inferior, inflow_inferior_exit): New functions.
	(child_terminal_info): Adjust to per-inferior terminal settings.
	(osig_set): New global.
	(set_sigint_trap): Adjust to per-inferior terminal settings.  Set
	or clear `osig_set' accordingly.
	(clear_sigint_trap): Check `osig_set' to decide wheater to restore
	SIGINT handler, instead of checking the current inferior (which
	may be none).
	(_initialize_inflow): Attach inflow_new_inferior and
	inflow_inferior_exit to the "new_inferior" and "inferior_exit"
	notifications, respectively.
	* inferior.h (struct terminal_info): Forward declare.
	(struct inferior): Add `terminal_info' field.
	* inferior.c (delete_inferior_1): Notify the inferior_exit
	observers before removing the inferior from the lists and deleting
	it.
	* inf-ptrace.c (inf_ptrace_stop): `inferior_process_group' is now
	a function instead of a variable.  Adjust.
	* procfs.c (procfs_stop): Ditto.

2009-05-17  Pedro Alves  <[email protected]>

	* infrun.c (handle_inferior_event): When handling a
	TARGET_WAITKIND_FORKED, detach breakpoints from the fork child
	immediatelly.
	* linux-nat.c (linux_child_follow_fork): Only detach breakpoints
	from the child if vforking.
	* inf-ptrace.c (inf_ptrace_follow_fork): No need to detach
	breakpoints from the child here.

2009-05-17  Pedro Alves  <[email protected]>

	* infrun.c (pending_follow): Remove execd_pathname member.
	(resume): No longer handle TARGET_WAITKIND_EXECD pending follow.
	(handle_inferior_event): When handling a TARGET_WAITKIND_EXECD
	event, don't copy `execd_pathname' to pending_follow, use the
	event copy instead.  Release `execd_pathname' once done with
	handling the event.

	* infrun.c (pending_follow): Remove mention of exec events.

2009-05-17  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Make it extern.
	(i386_gdbarch_init): Don't call set_gdbarch_process_record
	here.
	* i386-tdep.h (i386_process_record): Declare.
	* i386-linux-tdep.c (i386_linux_init_abi): Call
	set_gdbarch_process_record.

2009-05-17  Vladimir Prus  <[email protected]>

	Always report varobj as changed when in_scope attribute changes.

	* varobj.c (install_new_value): If non-NULL-ness of value
	changed, return 1.

2009-05-15  Paul Pluzhnikov  <[email protected]>
	
	* NEWS: Mention set/show libthread-db-search-path.
	* gdb_thread_db.h (LIBTHREAD_DB_SEARCH_PATH): New define.
	(LIBTHREAD_DB_SO): Moved from linux-thread-db.c
	* linux-thread-db.c (libthread_db_search_path): New setting.
	(thread_db_handle): New variable (replaces using_thread_db).
	(try_thread_db_load_1): New function.
	(try_thread_db_load, thread_db_load_search): Likewise.
	(dladdr_to_soname): Likewise.
	(thread_db_load): Iterate over possibly multiple libthread_db's.
	(check_for_thread_db): Attempt to load new libthread_db.
	(thread_db_detach, thread_db_wait): Unload libthread_db.
	(thread_db_mourn_inferior): Likewise.
	(_initialize_thread_db): Add new libthread-db-search-path option.
	Defer loading of libthread_db to check_for_thread_db.
	* solib.c (libpthread_name_p): New function.
	(libpthread_solib_p): Call it.
	* solib.h (libpthread_name_p): New prototype.
	
2009-05-15  Pierre Muller  <[email protected]>

	* MAINTAINERS: Update my email address.
	
2009-05-14  Paul Pluzhnikov  <[email protected]>

	* breakpoint.h: Add breakpoint_re_set_objfile prototype.
	* breakpoint.c (create_overlay_event_breakpoint): Renamed
	from create_overlay_event_breakpoint_1, old
	create_overlay_event_breakpoint deleted.
	(breakpoint_re_set_objfile): Don't rescan all objfiles
	unnecessarily.
	(breakpoint_re_set): New function.
	* symfile.c (new_symfile_objfile): Call breakpoint_re_set_objfile
	instead of breakpoint_re_set.
	* objfiles.c (objfile_relocate): Likewise.
	
2009-05-14  Joel Brobecker  <[email protected]>

	* gdbarch.sh: Add comment documenting the target_gdbarch global.
	gdbarch.h does NOT need to be regenerated as the corresponding
	change has already been made in a previous commit.

2009-05-14  Pierre Muller  <[email protected]>

	Remove all i386 debug register low level macros in config nm files.
	(I386_DR_LOW_SET_ADDR, I386_DR_LOW_RESET_ADDR): Remove.
	(I386_DR_LOW_GET_STATUS, I386_DR_LOW_SET_CONTROL): Remove.
	(I386_USE_GENERIC_WATCHPOIINTS): Remove.

	* i386-nat.h: New file (adapted from config/i386/nm-i386.h).
	(struct i386_dr_low_type): New type.
	(i386_dr_low): New global variable.
	* i386-nat.c (TARGET_HAS_DR_LEN_8): Update macro.
	(i386_insert_aligned_watchpoint): Replace i386 dr low macros by
	i386_dr_low struct variable fields.
	(i386_remove_aligned_watchpoint): Likewise.
	(i386_stopped_data_address): Likewise.
	(i386_stopped_by_hwbp): Likewise.
	(show_debug_regs_command_added): New static variable.
	(add_show_debug_regs_command): New static function.
	(i386_use_watchpoints): Call add_show_debug_regs_command if not done.
	(i386_set_debug_register_length): New function.
	(_initialize_i386_nat): Delete.
	
	* amd64-linux-nat.c: Include "i386-nat.h".
	(amd64_linux_dr_set_control):  Change to static.
	(amd64_linux_dr_get_status): Change to static.
	(amd64_linux_dr_set_addr,amd64_linux_dr_reset_addr): Likewise.
	(_initialize_amd64_linux_nat): Set i386_dr_low variable fields.
	
	* go32-nat.c: Include "i386-nat.h".
	(go32_set_addr): Change to static.
	(go32_set_dr7): Change to static. Change arg type to unisgned long.
	(go32_get_dr6): Change to static. Change return type to unisnged long.
	(init_go32_ops):  Set i386_dr_low variable fields.
	* i386-linux-nat.c: Include "i386-nat.h".
	(i386_linux_dr_set_control, i386_linux_dr_get_status): Change to static.
	(i386_linux_dr_set_addr, i386_linux_dr_reset_addr): Idem.
	(_initialize_i386_linux_nat):  Set i386_dr_low variable fields.
	* i386bsd-nat.h: Declare functions used for
	i386_dr_low fields in i386fbsd-nat.c.
	* i386fbsd-nat.c: Include "i386-nat.h".
	(_initialize_i386fbsd_nat): Set i386_dr_low variable fields.
	* windows-nat.c: Include "i386-nat.h".
	(cygwin_set_dr, cygwin_get_dr6, cygwin_set_dr7): Add prototypes.
	Change to static.
	(cygwin_get_dr6): Change return type to unisnged long.
	(cygwin_set_dr7): Change arg type to unisgned long.
	(init_windows_ops): Set i386_dr_low function fields.

	* amd64-windows-nat.c (_initialize_amd64_windows_nat): Call 
	i386_set_debug_register_length.
	* i386-windows-nat.c (_initialize_i386_windows_nat): Likewise.

	* config/i386/nm-cygwin.h: Remove all I386_* macros.
	* config/i386/nm-cygwin64.h: Likewise.
	* config/i386/nm-fbsd.h: Likewise.
	* config/i386/nm-linux.h: Likewise.
	* config/i386/nm-i386.h: Remove completely.
	* config/i386/nm-go32.h: Remove completely.
	* config/i386/nm-linux64.h: Remove completely.
	* config/i386/go32.mh (NAT_FILE): Remove entry.
	* config/i386/linux64.h (NAT_FILE): Change to config/nm-linux.h.

2009-05-14  Jon Beniston  <[email protected]>

	* MAINTAINERS: Add Jon Beniston to write after approval list.

2009-05-13  Paul Pluzhnikov  <[email protected]>

	* objc-lang.c (objc_objfile_data): New variable.
	(find_methods): Skip objfiles without Obj-C methods.
	(_initialize_objc_lang): New function.

2009-05-13  Joel Brobecker  <[email protected]>

	* c-lang.c (print_wchar): Remove unnecessary cast.

2009-05-12  Jim Blandy  <[email protected]>

	* MAINTAINERS: Remove self as m32c target maintainer.

2009-05-12  Pedro Alves  <[email protected]>

	* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
	* command.h (deprecated_add_set_cmd): Delete declaration.
	* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
	'set debug gnu-nat' and 'show debug gnu-nat'.
	* i386-nat.c (_initialize_i386_nat): Replace 'maint
	show-debug-registers' with 'maint set show-debug-registers' and
	'maint show show-debug-registers'.
	* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
	show-debug-registers' with 'maint set show-debug-registers' and
	'maint show show-debug-registers'.

2009-05-12  Joel Brobecker <[email protected]>

	* c-lang.c (print_wchar): Convert w into a gdb_wchar_t before
	pushing it on the output obstack.

2009-05-11  Joel Brobecker <[email protected]>

	Fix internal error on breaking at a multi-locations caller source line.
	* breakpoint.c (parse_breakpoint_sals): Set EXPLICIT_PC for the `break'
	command with no parameters.

2009-05-11  Pedro Alves  <[email protected]>

	* linux-nat.c (enum sigchld_state): Delete.
	(linux_nat_async_events_state): Delete.
	(struct waitpid_result): Delete.
	(waitpid_queue): Delete.
	(queued_waitpid_1): Delete.
	(async_file_flush): New.
	(queued_waitpid, push_waitpid): Delete.
	(async_file_mark): New.
	(drain_queued_events): Delete.
	(my_waitpid): Remove locally queued events handling.
	(linux_test_for_tracefork): Upjust.
	(linux_child_follow_fork): Ditto.
	(sync_sigchld_action): Delete.
	(blocked_mask): Reinstate.
	(async_sigchld_action): Rename to...
	(sigchld_action): ... this.
	(block_child_signals): New.
	(restore_child_signals_mask): New.
	(lin_lwp_attach_lwp): Adjust.
	(linux_nat_create_inferior): Ditto.
	(linux_nat_attach): Also use lp->status in async mode.
	(get_pending_status): Don't use queued_waitpid.
	(linux_nat_detach): Don't drain locally queued events.
	(linux_nat_resume): Allow pending wait statuses stored lp->status
	in async mode.  If returning early due to a pending event,
	re-register the event source.
	(stop_wait_callback): Allow pending wait statuses stored
	lp->status in async mode.
	(pipe_to_local_event_queue, local_event_queue_to_pipe): Delete.
	(linux_nat_wait): Rename to ...
	(linux_nat_wait_1): ... this.  Allow pending wait statuses stored
	lp->status in async mode.  Always add WNOHANG to the waitpid
	options in async mode.
	(linux_nat_wait): New.
	(kill_callback): Don't drain locally queued events.
	(sigchld_handler): Rewrite.
	(linux_nat_is_async_p, linux_nat_can_async_p): Fix comments to
	refer to "set target-async".
	(linux_nat_async_mask): If in non-stop, and re-enabling async
	mode, re-register the target event source in the event loop.
	(linux_nat_event_pipe_pop, linux_nat_event_pipe_push)
	(get_pending_events, async_sigchld_handler)
	(linux_nat_async_events): Delete.
	(handle_target_event): New.
	(linux_nat_async_file_handler): Delete.
	(linux_async_pipe): New.
	(linux_nat_async): Only re-register in the event loop if not
	registered yet.  Always notify the event-loop once if enabling the
	event source.
	(linux_nat_stop_lwp): Rewrite to handle pending events stored in
	lp->status, not in the locally queued event list.
	(linux_nat_stop): Don't mask out async event handling.
	(linux_nat_setup_async): Delete.
	(_initialize_linux_nat): Adjust.
	(lin_thread_get_thread_signals): blocked_mask is global again.
	Adjust.

2009-05-11  Pierre Muller  <[email protected]>

	Unify target macros.

	* target.h (STOPPED_BY_WATCHPOINT): Delete, replaced by ...
	(target_stoppped_by_watchpoint): New macro.
	(HAVE_STEPPABLE_WATCHPOINT): Delete, replaced by ...
	(target_have_steppable_watchpoint): New macro.
	(HAVE_CONTINUABLE_WATCHPOINT): Delete, replace by ...
	(target_have_continuable_watchpoint): New macro.
	(TARGET_CAN_USE_HARDWARE_WATCHPOINT):Delete, replaced by ...
	(target_can_use_hardware_watchpoint): New macro.
	(TARGET_REGION_OK_FOR_HW_WATCHPOINT):Delete, replaced by ...
	(target_region_ok_for_hw_watchpoint): New macro.

	* breakpoint.c (update_watchpoint): Use new macros.
	(bpstat_alloc): Likewise.
	(create_breakpoint): Likewise.
	(watch_command_1): Likewise.
	(can_use_hardware_watchpoint): Likewise.
	(do_enable_breakpoint): Likewise.
	* infrun.c (handle_inferior_event): Adapt to new macros.
	* mips-tdep.c (mips_gdbarch_init): Update comments.
	* procfs.c (procfs_set_watchpoint): Update comment.
	(procfs_insert_watchpoint): Adapt to new macros.
	* remote-m32r-sdi.c (m32r_stop):
	* remote-mips.c (mips_remove_breakpoint):
	* target.c (debug_to_region_ok_for_hw_watchpoint): Update to new macros.
	(debug_to_stopped_by_watchpoint): Likewise.


2009-05-10  Pierre Muller  <[email protected]>

	* src/gdb/target.h: Remove all tests for already defined
	macros. All macros defined here should not be set in config
	headers anymore.

2009-05-08  Sergio Durigan Junior <[email protected]>

	* ppc-linux-nat.c (have_ptrace_getsetregs): New variable.
	(have_ptrace_getsetfpregs): Likewise.
	fetch_all_gp_regs): New function.
	(fetch_gp_regs): New function.
	(fetch_all_fp_regs): Likewise.
	(fetch_fp_regs): New function.
	(fetch_ppc_registers): Using the new methods to fetch general-
	purpose and floating-pointer registers.
	(store_all_gp_regs): New function.
	(store_gp_regs): Likewise.
	(store_all_fp_regs): New function.
	(store_fp_regs): Likewise.
	(store_ppc_registers): Using the new methods to store general-
	purpose and floating-pointer registers.

2009-05-08  Doug Evans  <[email protected]>

	* linux-nat.c (linux_xfer_siginfo): Delete unused locals lp, n.

2009-05-07  Sergio Durigan Junior  <[email protected]>

	* MAINTAINERS (Write After Approval): Add self.

2009-05-07  Joel Brobecker  <[email protected]>

	* gdbarch.h (target_gdbarch): Add comment documenting this global.

2009-05-06  Joel Brobecker  <[email protected]>

	* acinclude.m4 (AM_ICONV): Prefer in-tree libiconv if present over
	system iconv.
	* configure: Regenerate.

2009-05-06  Joel Brobecker  <[email protected]>

	* utils.c: Add include of gdb_usleep.h.
	(defaulted_query): Detect false EOF conditions that happen
	on terminals opened with the O_NONBLOCK flag when there is
	nothing to read.

2009-05-06  Pedro Alves  <[email protected]>

	* inferior.c (add_inferior): Move observer_notify_new_inferior
	call to ...
	(add_inferior_silent): ... here.

2009-05-06  Pierre Muller  <[email protected]>
	    Pedro Alves  <[email protected]>

	* procfs.c (procfs_insert_watchpoint, procfs_remove_watchpoint)
	(procfs_region_ok_for_hw_watchpoint, procfs_use_watchpoints): New
	functions.
	(procfs_stopped_by_watchpoint): Made static, ptid argument
	removed.
	(_initialize_procfs): Register new watchpoint related target
	functions.
	* config/i386/nm-i386sol2.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT)
	(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT)
	(HAVE_CONTINUABLE_WATCHPOINT): Delete.
	(target_insert_watchpoint, target_remove_watchpoint): Delete.
	(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
	declarations.
	* config/mips/nm-irix5.h (STOPPED_BY_WATCHPOINT)
	(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
	(target_insert_watchpoint, target_remove_watchpoint): Delete.
	(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
	declarations.
	* config/sparc/nm-sol2.h (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
	(HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT): Delete.
	(target_insert_watchpoint, target_remove_watchpoint): Delete.
	(procfs_stopped_by_watchpoint, procfs_set_watchpoint): Delete
	declarations.

2009-05-06  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Change bzero to memset.

2009-05-06  Hui Zhu  <[email protected]>

	* NEWS: Add item for process record and replay.

2009-05-05  Maxim Grigoriev  <[email protected]>

	* xtensa-tdep.c (xtensa_frame_cache): Use pc instead of cache->pc.

2009-05-05  Ulrich Weigand  <[email protected]>

	* inferior.h (read_pc, write_pc): Remove.
	* regcache.c (read_pc, write_pc): Remove.

	* infrun.c (displaced_step_fixup): Use regcache_read_pc instead
	of read_pc.
	(handle_inferior_event): Use regcache_read_pc instead of read_pc
	when determining value of stop_pc.  Replace subsequent uses of
	read_pc by inspecting already-retrieved stop_pc value.
	(keep_going): Use regcache_read_pc instead of read_pc.

	* breakpoint.c (watchpoint_check): Use current frame architecture
	and PC instead of current_gdbarch and read_pc ().
	* tracepoint.c (set_traceframe_context): Replace PC argument
	with FRAME argument.
	(trace_start_command, finish_tfind_command): Update calls.
	(finish_tfind_command): Compare frame IDs to identify transitions
	between frames.
	(trace_find_pc_command): Use regcache_read_pc instead of read_pc.
	* rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead
	of gdbarch.  Use regcache_read_pc and regcache_write_pc instead
	of read_pc and write_pc.
	(store_register): Make regcache argument non-const.  Update call
	to exec_one_dummy_insn.

	* thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc.
	* infcmd.c (post_create_inferior): Likewise.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
	* solib-sunos.c (sunos_solib_create_inferior_hook): Likewise.
	* solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise.
	* linux-fork.c (fork_load_infrun_state): Likewise.
	* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
	* record.c (record_wait): Likewise.
	* procfs.c (procfs_wait): Likewise.
	* remote-mips.c (common_open, mips_wait): Likewise.
	* remote-m32r-sdi.c (m32r_resume): Likewise.

	* symfile.c (generic_load): Use regcache_write_pc instead of write_pc.
	* monitor.c (monitor_create_inferior, monitor_load): Likewise.
	* m32r-rom.c (m32r_load, m32r_upload_command): Likewise.
	* remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise.
	* remote-mips.c (mips_create_inferior, mips_load): Likewise.

	* solib-darwin.c: Include "regcache.h".
	* solib-pa64.c: Include "regcache.h".
	* solib-svr4.c: Include "regcache.h.".

	* symfile.c: Do not mention read_pc or write_pc in comments.
	* dink32-rom.c: Likewise.
	* m32r-rom.c: Likewise.
	* mips-tdep.c: Likewise.

2009-05-05  Ulrich Weigand  <[email protected]>

	* fork-child.c (startup_inferior): Move setting stop_pc ...
	* infcmd.c (post_create_inferior): ... to here.

2009-05-04  Michael Snyder  <[email protected]>

	* NEWS: Add item for reverse debugging commands.

2009-05-04  Pedro Alves  <[email protected]>

	* go32-nat.c (go32_stop): Delete.
	(go32_kill_inferior): Rewrite to only call go32_mourn_inferior.
	(go32_create_inferior): Don't call go32_stop or
	go32_kill_inferior.
	(go32_mourn_inferior): Inline go32_stop and go32_kill_inferior
	here.
	(init_go32_ops): Don't register go32_stop.

2009-05-02  Eli Zaretskii  <[email protected]>

	* dbxread.c (read_dbx_symtab): Avoid compiler warnings for
	sym_name.

	* infcall.c (find_function_addr): Avoid compiler warnings for
	funaddr.

2009-05-01  Jan Kratochvil  <[email protected]>

	* dictionary.c (dict_hashed_vector, dict_hashed_expandable_vector)
	(dict_linear_vector, dict_linear_expandable_vector): Fix a comment typo.

2009-05-01  Doug Evans  <[email protected]>

	* linux-thread-db.c (thread_db_pid_to_str): Delete unused assignment
	to thread_info.

2009-05-01  Eli Zaretskii  <[email protected]>

	* record.c (_initialize_record): Reformat and clarify doc strings
	for stop-at-limit and insn-number-max.

	* go32-nat.c: Add comments about dirty secrets of DJGPP debugging.

2009-05-01  Jan Kratochvil  <[email protected]>

	Make specifiable the make_function_type type memory ownership.
	* gdbtypes.c (make_function_type): New parameter `objfile', use it
	explicitely instead of TYPE-initialized removed local variable
	`objfile'.  Describe `objfile' it in the function comment.
	(lookup_function_type): Update make_function_type callers.
	* gdbtypes.h (make_function_type): Update the prototype.
	* jv-lang.c (java_link_class_type): Update make_function_type callers.
	* dwarf2read.c (read_subroutine_type): Likewise.
	* stabsread.c (read_type): Likewise.

2009-05-01  Eli Zaretskii  <[email protected]>

	* go32-nat.c (go32_pid_to_str): Call normal_pid_to_str instead of
	printing a bogus "Thread <main>".
	(go32_thread_alive): Don't return 1 for null_ptid.

	* i386-tdep.c (i386_go32_init_abi): Override the number of
	registers due to non-support of SSE.

2009-04-30  Anthony Green  <[email protected]>

	* configure.tgt: Link the moxie simulator in with gdb.

2009-04-30  Paul Pluzhnikov  <[email protected]>

	* elfread.c (elf_symtab_read): Don't assume .data and .rodata
	are present.

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	I386 Linux process record and replay support.

	* i386-linux-tdep.c (i386_linux_record_tdep): New variable.
	This struct has the argument for the function
	"record_linux_system_call".
	(i386_linux_intx80_sysenter_record): New function. Parse the
	system call instruction and call function
	"record_linux_system_call" to record execute log.
	(i386_linux_init_abi): Initialize "i386_linux_record_tdep".
	Set "i386_linux_intx80_sysenter_record" to
	"i386_intx80_record" and "i386_sysenter_record".

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	I386 architecture process record and replay support.

	* i386-tdep.c (PREFIX_REPZ, PREFIX_REPNZ, PREFIX_LOCK,
	PREFIX_DATA, PREFIX_ADDR): New macros. Help decode the i386
	instruction set.
	(aflag, dflag, override, modrm, mod, reg, rm, ot,
	i386_record_pc): New variables. Ditto.
	(i386_record_modrm, i386_record_lea_modrm_addr,
	i386_record_lea_modrm): New functions. Ditto.
	(i386_process_record): New function. Parse the instruction in
	address "addr" and record the values of registers and memory
	that will be changed by this instruction.
	(i386_gdbarch_init): Set "i386_process_record" to GDBARCH
	"process_record" interface.
	* i386-tdep.h (gdbarch_tdep): New function pointers
	"i386_intx80_record" and "i386_sysenter_record" that point to
	the function that can record "intx80" and "sysenter" execute
	log.

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	* infrun.c (use_displaced_stepping): Return false if process
	record and replay target is used.
	(proceed): Call function "record_not_record_set" if pocess
	record and replay target is used.

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	Linux process record and replay support.

	* Makefile.in (ALLDEPFILES): Add linux-record.c.
	(ALL_TARGET_OBS): Add linux-record.o.
	* configure.tgt (x86_64-*-linux*): Add linux-record.o.
	(i[34567]86-*-linux*): Add linux-record.o.
	* linux-record.c, linux-record.h: New file.

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	Process record and replay target.

	* Makefile.in (SFILES): Add record.c.
	(COMMON_OBS): Add record.o.
	* record.c, record.h: New file.

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	* target.h (strata): New stratum "record_stratum".

2009-04-30  Hui Zhu  <[email protected]>
            Michael Snyder  <[email protected]>

	GDBARCH interface for process record and replay.

	* gdbarch.sh (process_record): This interface point to the
	function that records the inferior execute log.

2009-04-29  Doug Evans  <[email protected]>

	* i386-nat.c (child_post_startup_inferior): Delete, unused.

2009-04-29  Pedro Alves  <[email protected]>

	* breakpoint.c (print_exception_catchpoint): Access `b' directly
	instead of `b->loc->owner'.
	(print_mention_exception_catchpoint): Ditto.

2009-04-29  Jan Kratochvil  <[email protected]>

	* macrocmd.c (info_macro_command): Print -Dname=value if LINE is zero.

2009-04-27  Tom Tromey  <[email protected]>

	* c-exp.y (yylex): Handle '[' and ']' like '(' and ')'.

2009-04-27  Jerome Guitton  <[email protected]>

	* symtab.c (append_exact_match_to_sals): New function, extracted
	from expand_line_sal.
	(expand_line_sal): Use append_exact_match_to_sals to append exact
	matches. If none found, append all best items.

2009-04-27  Jerome Guitton  <[email protected]>

	* main.c (captured_main): Move gdbinit lookups after gdb_init.

2009-04-27  Jan Kratochvil  <[email protected]>

	PR gdb/9675:
	* dwarf2read.c (unsigned_int_compar, inherit_abstract_dies): New.
	(read_func_scope): Call inherit_abstract_dies.

2009-04-25  Eli Zaretskii  <[email protected]>

	* Makefile.in (ALLDEPFILES): Remove duplicate entries for
	sparc-sol2-nat.c and sparc-sol2-tdep.c.

	* stack.c (_initialize_stack) <disassemble-next-line>: Doc fix.

2009-04-24  Pierre Muller  <[email protected]>

	ARI change: Use "/* ARI: rule */" pattern.
	* utils.c: Update ARI patterns.
	* gdb_dirent.h: Likewise.

2009-04-23  Anthony Green  <[email protected]>

	* MAINTAINERS: Add moxie target.
	* configure.tgt: Add moxie-*-elf target.
	* moxie-tdep.c: New file.
	* moxie-tdep.h: New file.

2009-04-23  Joel Brobecker  <[email protected]>

	* ada-lang.c: Remove an extra empty line. No code change.

2009-04-23  Jan Kratochvil  <[email protected]>

	Fix double free on error inserting the breakpoint instruction.
	* breakpoint.c (create_breakpoints): Move the
	update_global_location_list call to ...
	(break_command_really): ... here together with the second local call
	both unified after all the cleanups.

2009-04-23  Sergio Durigan Junior <[email protected]>
	    Tom Tromey  <[email protected]>

	* configure, config.in: Regenerate.
	* configure.ac: Support for relocatable GDB datadir.  Use
	GDB_AC_WITH_DIR.  Always define TARGET_SYSTEM_ROOT_RELOCATABLE.
	* acinclude.m4 (GDB_AC_WITH_DIR): New defun.
	* top.c (init_main): Add "set data-directory".
	* defs.h (gdb_datadir): Declare.
	* main.c (gdb_datadir): New global.
	(captured_main): Initialize gdb_datadir.  Use relocate_directory.
	(relocate_path): New function.
	(relocate_directory): Likewise.
	(get_init_files): Use relocate_path.
	(README): Mention --with-gdb-datadir.

2009-04-23  Joel Brobecker  <[email protected]>

	* ada-tasks (task_command_1): Call target_find_new_threads.

2009-04-23  Joel Brobecker  <[email protected]>

	* stack.c (do_gdb_disassembly): Print the exception message if an
	error was thrown while trying to perform the disassembly.

2009-04-22  Jan Kratochvil  <[email protected]>

	* varobj.c (free_variable): Replace free_current_contents by xfree.

2009-04-22  Kazu Hirata  <[email protected]>

	* arm-linux-nat.c (fetch_register, store_register): Use
	ARM_CPSR_GREGNUM instead of ARM_CPSR_REGNUM.
	* arm-linux-tdep.c (arm_linux_supply_gregset,
	arm_linux_collect_gregset): Likewise.
	* arm-linux-tdep.h (ARM_CPSR_GREGNUM): New.
	* arm-tdep.h (ARM_CPSR_REGNUM): Remove.

2009-04-22  Hui Zhu  <[email protected]>

	* stack.c (_initialize_stack): Set the default of
	disassemble-next-line to off.

2009-04-21  Tom Tromey  <[email protected]>

	* acinclude.m4: Use AS_HELP_STRING, not AC_HELP_STRING.
	* configure.ac: Use AS_HELP_STRING, not AC_HELP_STRING.

2009-04-21  Andreas Schwab  <[email protected]>

	* configure.ac: Add quotes to not lose brackets in help text.
	* configure: Rebuild.

2009-04-21  Andreas Schwab  <[email protected]>

	* configure.ac: Don't postprocess Makefile in config.status.
	Substitute GDB_NM_FILE.  Don't substitute nm_h.
	* Makefile.in (GDB_NM_FILE): Substitute.
	(TAGS): Use $(GDB_NM_FILE) instead of $(NAT_FILE).
	* configure: Regenerate.
	* gnulib/Makefile.in: Regenerate.

2009-04-21  Joseph Myers  <[email protected]>

	* configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
	--with-htmldir): New.
	* configure: Regenerate.

2009-04-21  Tom Tromey  <[email protected]>

	* configure: Rebuild.
	* configure.ac: Use lower case for start of help strings.  Clean
	up --with-sysroot help.

2009-04-21  Tom Tromey  <[email protected]>

	* configure: Rebuild.
	* acinclude.m4 (AM_ICONV): Use AC_HELP_STRING.
	* configure.ac: Use AC_HELP_STRING.  Use upper case for variables
	in help.

2009-04-21  Pierre Muller  <[email protected]>

	ARI fix: remove "%p".
	* ia64-tdep.c (ia64_frame_this_id): Use host_address_to_string function.
	(ia64_sigtramp_frame_this_id): Ditto.
	(ia64_libunwind_frame_this_id): Ditto.
	(ia64_libunwind_sigtramp_frame_this_id): Ditto.
	* symmisc.c (maintenance_info_psymtabs): Ditto.

2009-04-21  Joseph Myers  <[email protected]>

	* configure.ac (--with-relocated-sources): New.
	* configure, config.in: Regenerate.
	* source.c (add_substitute_path_rule): Remove static.
	* source.h (add_substitute_path_rule): Declare.
	* main.c: Include "source.h".
	(captured_main): Add substitution rule if RELOC_SRCDIR.

2009-04-21  Pierre Muller  <[email protected]>

	* gnu-nat.h (proc_debug): Add missing continuation line in macro.

2009-04-20  David Daney  <[email protected]>

	* NEWS: Mention MIPS/Linux hardware watchpoint support.

2009-04-20  David Daney  <[email protected]>

	* mips-linux-nat.c (command.h, gdbcmd.h, gdb_assert.h): New #includes.
	(maint_show_dr, super_close): New variables.
	(super_fetch_registers, super_store_registers): Make static.
	(PTRACE_GET_WATCH_REGS, PTRACE_SET_WATCH_REGS, W_BIT, R_BIT, I_BIT)
	(W_MASK, R_MASK, I_MASK, IRW_MASK, MAX_DEBUG_REGISTER): Define.
	(pt_watch_style): Define new enum.
	(mips32_watch_regs, mips64_watch_regs, pt_watch_regs, mips_watchpoint):
	Define new structs.
	(watch_readback_valid, watch_readback, current_watches,	watch_mirror):
	New variables.
	(get_irw_mask, get_reg_mask, get_num_valid, get_watchlo)
	(set_watchlo, get_watchhi, set_watchhi, mips_show_dr)
	(mips_linux_read_watch_registers, mips_linux_can_use_hw_breakpoint)
	(mips_linux_stopped_by_watchpoint, mips_linux_stopped_data_address)
	(type_to_irw, fill_mask, try_one_watch)
	(mips_linux_region_ok_for_hw_watchpoint, write_watchpoint_regs)
	(mips_linux_new_thread, populate_regs_from_watches)
	(mips_linux_insert_watchpoint, mips_linux_remove_watchpoint)
	(mips_linux_close): New functions.
	(_initialize_mips_linux_nat): Register watchpoint functions with
	the target_ops.  Add show-debug-regs maintenance command.

2009-04-20  David Daney  <[email protected]>

	* infrun.c (handle_inferior_event): Move gegisters_changed call down.

2009-04-19  Pedro Alves  <[email protected]>

	* NEWS: Mention gdbserver support for x86 Windows CE.

2009-04-19  Eli Zaretskii  <[email protected]>

	* config/djgpp/fnchange.lst: Fix typos.

	Set default host and target charsets in the DJGPP port.

	* config/djgpp/config.sed (am_cv_langinfo_codeset)
	(bash_cv_langinfo_codeset, ac_cv_header_nl_types_h): Set to "yes"
	in all configure scripts that define ac_cv_env_CPP_value.

	* go32-nat.c (dos_codepage, nl_langinfo): New functions.
	Include langinfo.h.

	* config/djgpp/nl_types.h: New file.

	* config/djgpp/langinfo.h: New file.

	* config/i386/go32.mh (MH_CFLAGS): Add $(srcdir)/config/djgpp.

2009-04-18  Carlos O'Donell  <[email protected]>

	* Makefile.in (MAKEHTML): Set to makeinfo --html.
	(MAKEHTMLFLAGS): Set to empty.

2009-04-18  Eli Zaretskii  <[email protected]>

	* NEWS: Mention all new set/show commands added since GDB 6.8 was
	released.

	* go32-nat.c (go32_sysinfo): Check if the call to
	__dpmi_get_capabilities fills the buffer with information, and
	don't use the buffer if not.

2009-04-17  Tom Tromey  <[email protected]>

	* charset.c (_initialize_charset): Add special case for "646".

2009-04-17  Carlos O'Donell  <[email protected]>

	* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
	* configure: Regenerate.
	* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
	configure substitutions.
	(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.

2009-04-17  Pierre Muller  <[email protected]>

	ARI fix: Do not use %p, replace by call to host_address_to_string
	for host pointers.
	* darwin-nat.c (darwin_xfer_partial): Apply change.
	* gnu-nat.c (inf_continue, gnu_xfer_memory): Ditto.
	* gnu-nat.h (proc_debug): Ditto.
	* symmisc.c (maintenance_info_symtabs): Ditto.
	(maintenance_info_psymtabs): Ditto.
	* windows-nat.c (handle_load_dll): Ditto.
	(handle_unload_dll, info_w32_command, handle_exception): Ditto.
	* xtensa-tdep.c (xtensa_unwind_pc): Ditto.

2009-04-17  Joseph Myers  <[email protected]>

	* configure.tgt (i[34567]86-*-linux*): Use 64-bit configuration if
	--enable-64-bit-bfd.
	(sparc-*-linux*): Likewise.

2009-04-17  Eli Zaretskii  <[email protected]>

	* go32-nat.c (go32_sysinfo): Update list of Windows versions of
	the NT family.

2009-04-16  Pedro Alves  <[email protected]>

	* remote.c (remote_query_attached): Fix pasto in packet_ok result
	checking.

2009-04-16  Joel Brobecker  <[email protected]>

	* procfs.c (solib_mappings_callback, find_memory_regions_callback):
	Revert the previous change.  Might not be correct, actually.

2009-04-16  Joel Brobecker  <[email protected]>

	* ada-lang.h (ada_adjust_exception_stop, ada_print_exception_stop)
	(ada_get_current_task, ada_print_exception_breakpoint_nontask)
	(ada_print_exception_breakpoint_task, ada_reset_thread_registers):
	Remove declaration. These are non-existent functions.

2009-04-16  Joel Brobecker  <[email protected]>

	* procfs.c (solib_mappings_callback, find_memory_regions_callback):
	Fix a compilation warning on mips-irix due to casting from
	a pointer of different size.

2009-04-16  Joel Brobecker  <[email protected]>

	* ada-lang.c (symtab_for_sym): Delete.
	(user_select_syms): Use sym->symtab instead of calling symtab_for_sym.

2009-04-16  Joel Brobecker  <[email protected]>

	* ada-lang.c (extract_string): Delete.
	(ada_main_name): Reimplement using target_read_string instead of
	extract_string.

2009-04-16  Andreas Schwab  <[email protected]>

	* m68klinux-nat.c: Remove obsolete comment.
	(fetch_register, store_register): Don't call
	gdbarch_cannot_fetch_register or gdbarch_cannot_store_register,
	which are always nops here.

2009-04-14  Tom Tromey  <[email protected]>

	* c-lang.c (c_emit_char): Use INTERMEDIATE_ENCODING.
	(c_printstr): Likewise.
	* charset.c: Include gdb_wait.h.
	(make_wchar_iterator): Use INTERMEDIATE_ENCODING.
	(find_charset_names): Use pexecute.  Handle libiconv's output.
	Detect errors.
	(_initialize_charset): Use xstrdup.
	* gdb_wchar.h: Check HAVE_BTOWC.  Split PHONY_ICONV and wchar
	cases.
	(INTERMEDIATE_ENCODING): New define.
	* configure, config.in: Rebuild.
	* configure.ac: Check for btowc.

2009-04-15  Tom Tromey  <[email protected]>

	* c-lang.c (evaluate_subexp_c): Correctly handle EVAL_SKIP.

2009-04-15  Eli Zaretskii  <[email protected]>

	* utils.c (parse_escape): Initialize target_char to pacify GCC.

2009-04-14  Jan Kratochvil  <[email protected]>

	* c-lang.c (c_get_string): Fix xfree crash on a failed string read.

2009-04-14  Pierre Muller  <[email protected]>

	ARI fix: sprintf rule.
	* ada-exp.y (convert_char_literal): Replace sprintf by xsnprintf.
	* ada-lang.c (add_angle_brackets): Use xstrprintf.
	(ada_decode): Replace sprintf by xsnprintf.
	(find_old_style_renaming_symbol): Ditto.
	(ada_to_fixed_type_1, ada_enum_name): Ditto.


2009-04-14  Joel Brobecker  <[email protected]>

	* target.c (target_mourn_inferior): Call bfd_cache_close_all
	after having executed the target mourn_inferior routine.

2009-04-14  Eli Zaretskii  <[email protected]>

	* config/djgpp/djconfig.sh (DEPDIR): Define to "_deps", if
	undefined.

2009-04-13  David Daney  <[email protected]>

	* infrun.c (maybe_software_singlestep): New function.
	(resume): Call maybe_software_singlestep.
	(handle_inferior_event): Same.

2009-04-13  Tom Tromey  <[email protected]>

	* python/python-frame.c (frapy_richcompare): Return
	Py_NotImplemented, not an error.  Handle Py_NE as well.

2009-04-13  Eli Zaretskii  <[email protected]>

	* charset.c (EILSEQ): Define if not defined by system headers.

2009-04-11  Eli Zaretskii  <[email protected]>

	* config/djgpp/config.sed: Tweak ac_config_files in intl/configure
	to be consistent with renaming config.intl.in into config_intl.in.

	* go32-nat.c (go32_attach, go32_detach): Fix prototypes to be
	consistent with the change from 2008-11-09.

2009-04-10  Jan Kratochvil  <[email protected]>

	* gdbtypes.c: Remove excessive parentheses at the return keywords.
	* varobj.c (varobj_invalidate): Fix indentation.
	* varobj.c (varobj_invalidate): Fix formatting text width.

2009-04-08  Vladimir Prus  <[email protected]>

	Implement -exec-jump.

	* mi/mi-cmds.h (mi_cmd_exec_jump): Declare.
	* mi/mi-main.c (mi_cmd_exec_jump): New.
	* mi/mi-cmds.c (mi_cmds): Register exec-jump.

2009-04-07  Doug Evans  <[email protected]>

	* symfile.c (symbol_file_clear): Fix indentation.

2009-04-06  Mark Kettenis  <[email protected]>

	* sparc64nbsd-nat.c (sparc64nbsd_supply_pcb): Fix comment.

2009-04-03  Ulrich Weigand  <[email protected]>

	* ppc-linux-nat.c (ppc_linux_target_wordsize): New function.
	(ppc_linux_auxv_parse): New function.
	(ppc_linux_read_description): Use ppc_linux_target_wordsize.
	(_initialize_ppc_linux_nat): Install ppc_linux_auxv_parse.

2009-04-03  Ulrich Weigand  <[email protected]>

	* spu-linux-nat.c (spu_bfd_open): Set filename of in-memory
	BFD to contents of SPU name note.
	(spu_symbol_file_add_from_memory): Call symbol_file_add_from_bfd
	with "from_tty" argument 1 instead of 0.

2009-04-02  Jan Kratochvil  <[email protected]>

	* dwarf2read.c
	(new_symbol <DW_TAG_variable> <!DW_AT_location> <DW_AT_external>):
	Create the symbol in local scope.
	* symtab.h (cu->list_in_scope <LOC_UNRESOLVED>): New comment part.

2009-04-02  Keith Seitz  <[email protected]>

	* stabsread.c (read_member_functions): GCC may emit an extra space
	at the end of the names "__base_ctor" and "__base_dtor"; so ignore
	whitespace when looking for these functions.

2009-04-01  Joel Brobecker  <[email protected]>

	Change the default value for "set print frame-arguments" to scalars.

	* stack.c (print_frame_arguments): Set initial value to "scalars".

2009-04-01  Aleksandar Ristovski  <[email protected]>

	* mips-tdep.c (mips_numeric_register_alieses): New definition.
	(mips_gdbarch_init): Add user registers from
	mips_numeric_register_aliases.

2009-04-01  Joel Brobecker  <[email protected]>

	* linux-nat.c (linux_nat_filter_event): Minor comment reformatting.

2009-04-01  Joel Brobecker  <[email protected]>

	* linux-nat.c (linux_nat_filter_events): Do not delete the lwp if
	this is the last one.

2009-04-01  Pedro Alves  <[email protected]>

	* remote.c (append_resumption): New.
	(remote_vcont_resume): Use it.

2009-04-01  Joel Brobecker  <[email protected]>

	* windows-nat.c (+windows_get_ada_task_ptid): New function.
	(init_windows_ops): Set windows_ops.to_get_ada_task_ptid.

2009-03-31  Daniel Jacobowitz  <[email protected]>
	    Keith Seitz  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	PR gdb/6817
	* Makefile.in (dbxread.o): Update.
	* dbxread.c (read_dbx_symtab): Use cp_canonicalize_string.
	* dwarf2read.c (GDB_FORM_cached_string): New.
	(read_partial_die): Use dwarf2_canonicalize_name.
	(dwarf2_linkage_name): Use dwarf2_name.
	(dwarf2_canonicalize_name): New.
	(dwarf2_name): Use dwarf2_canonicalize_name.
	(dwarf_form_name, dump_die): Handle GDB_FORM_cached_string.
	* stabsread.c (define_symbol, read_type): Use cp_canonicalize_string.
	* symtab.c (lookup_symbol_in_language): Canonicalize input before
	searching.
	* cp-name-parser.y: operator() requires two parameters,
	according to libiberty.
	* minsyms.c (lookup_minimal_symbol): Canonicalize input
	before searching.
	* NEWS: Update.

2009-03-31  Joel Brobecker  <[email protected]>

	Provide support for (Ada) task-specific breakpoints.

	* ada-lang.h (ada_get_task_number): Add declaration.
	(breakpoint_ada_task_match): Delete declaration.
	* ada-tasks.c (ada_get_task_number): Make non-static.
	* breakpoint.h (struct breakpoint): Add field "task".
	* breakpoint.c (print_one_breakpoint_location): Add handling of
	task-specific breakpoints.
	(create_breakpoint, create_breakpoints, find_condition_and_thread):
	New parameter "task".
	(break_command_really): Update calls to find_condition_and_thread
	and create_breakpoints.
	(breakpoint_re_set_one): Update call to find_condition_and_thread.
	Set b->task.

2009-03-31  Joel Brobecker  <[email protected]>

	* ada-tasks.c (short_task_info): Eliminate the "Running" task state.

2009-03-31  Pedro Alves  <[email protected]>

	* remote.c (remote_notice_new_inferior): Use ptid_is_pid.  Check
	if the thread's ptid without a thread id field is in the list
	before calling thread_change_ptid.
	(extended_remote_attach_1): In non-stop mode, do not rely on
	querying the current thread, instead, query the thread list, and
	select the first thread of the process.
	* gdbthread.h (first_thread_of_process): Declare.
	* thread.c (first_thread_of_process): Define.

2009-03-30  Stan Shebs  <[email protected]>

	Make tracepoints into a type of breakpoint.
	* breakpoint.h (enum bptype): Add bp_tracepoint.
	(struct breakpoint): Add fields step_count, pass_count, actions.
	(get_tracepoint, get_tracepoint_by_number): Declare.
	(all_tracepoints): Declare.
	* breakpoint.c: Include tracepoint.h, readline.h.
	(ALL_TRACEPOINTS): Move here from tracepoint.c.
	(tracepoint_count): Ditto.
	(should_be_inserted): GDB does not insert tracepoints itself.
	(print_it_typical): Add tracepoint case.
	(bpstat_what): Ditto.
	(print_one_breakpoint_location): Ditto, and add printing for
	pass count, step count, and action list.
	(user_settable_breakpoint): Add tracepoint case.
	(allocate_bp_location): Ditto.
	(set_breakpoint_location_function): Ditto.
	(disable_breakpoints_in_shlibs): Ditto.
	(mention): Ditto.
	(break_command_really): Add argument traceflag, use to choose
	basic breakpoint type.
	(break_command_1): Pass extra argument.
	(set_breakpoint, handle_gnu_v3_exceptions): Ditto.
	(breakpoint_re_set_one): Add tracepoint case.
	(disable_command, enable_command): Ditto.
	(set_tracepoint_count): Move here from tracepoint.c.
	(trace_command): Move here from tracepoint.c and use
	break_command_really.
	(tracepoints_info): Move here from tracepoint.c and call
	breakpoints_info.
	(enable_trace_command): Move here from tracepoint.c and call
	enable_command.
	(disable_trace_command): Move here from tracepoint.c and call
	disable_command.
	(delete_trace_command): Move here from tracepoint.c and call
	delete_breakpoint.
	(trace_pass_command): Move here from tracepoint.c.
	(get_tracepoint_by_number): Ditto.
	(tracepoint_save_command): Ditto.
	(get_tracepoint): New function.
	(all_tracepoints): New function.
	(_initialize_breakpoint): Move tracepoint init from tracepoint.c,
	deprecate "enable trace" and "disable trace" commands.
	* tracepoint.h (struct tracepoint): Remove.
	(tracepoint_chain): Remove decl.
	(deprecated_create_tracepoint_hook): Remove decl.
	(deprecated_delete_tracepoint_hook): Remove decl.
	(deprecated_modify_tracepoint_hook): Remove decl.
	(ALL_TRACEPOINTS, ALL_TRACEPOINTS_SAFE): Remove.
	(free_actions): Update signature.
	(validate_actionline): Update signature.
	(end_actions_pseudocommand): Declare.
	(while_stepping_pseudocommand): Declare.
	* tracepoint.c: Include breakpoint.h.
	(tracepoint_chain, tracepoint_count): Remove.
	(free_actions, make_cleanup_free_actions): Update signature.
	(trace_command, set_raw_tracepoint): Remove.
	(trace_mention): Remove.
	(tracepoints_info): Remove.
	(tracepoint_operation, map_args_over_tracepoints): Remove.
	(get_tracepoint_by_number): Remove.
	(enable_trace_command, disable_trace_command): Remove.
	(delete_trace_command, trace_pass_command): Remove.
	(trace_actions_command, read_actions): Update signature.
	(validate_actionline): Update signature, use bp loc.
	(encode_actions): Ditto.
	(download_tracepoint): New function, body of trace_start_command.
	(trace_start_command): Call it, use all_tracepoints.
	(tracepoint_save_command): Remove.
	(tracepoint_dump_command): Use get_tracepoint.
	(end_actions_pseudocommand): Make globally visible.
	(while_stepping_pseudocommand): Ditto.
	(_initialize_tracepoint): Move command definitions to breakpoint.c.

2009-03-30  Thiago Jung Bauermann  <[email protected]>

	Expose frames to Python.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-frame.o.
	(SUBDIR_PYTHON_SRCS): Add python-frame.c.
	(python-frame.o): New target.
	* python/python-frame.c: New file.
	* python/python-internal.h (gdbpy_frames, gdbpy_newest_frame,
	gdbpy_frame_stop_reason_string, gdbpy_selected_frame,
	gdbpy_initialize_frames): New prototypes.
	* python/python.c (_initialize_python): Call gdbpy_initialize_frames.
	(GdbMethods): Add `selected_frame' and `frame_stop_reason_string'
	entries.
	* stack.c (find_frame_funname): New function, factored out of
	print_frame.
	(print_frame): Call find_frame_funname.
	* stack.h (find_frame_funname): Add prototype.

2009-03-29  Thiago Jung Bauermann  <[email protected]>

	Remove unused value_object attribute `owned_by_gdb'.
	* python/python-value.c (value_object): Remove owned_by_gdb
	attribute.
	(valpy_dealloc): Remove reference to self->owned_by_gdb.
	(valpy_new): Likewise.
	(value_to_value_object): Likewise.

2009-03-29  Thiago Jung Bauermann  <[email protected]>

	Change gdb.Value.address from a method to an attribute.
	* python/python-value.c (value_object): Add `address' element.
	(valpy_dealloc): Decrement reference to self->address if set.
	(valpy_new): Initialize val_obj->address.
	(valpy_address): Rename to ...
	(valpy_get_address): ... this.  Change signature from method to
	attribute.  Update self->address if not set.
	(value_to_value_object): Initialize val_obj->address.
	(value_object_getset): Add `address' element.
	(value_object_methods): Remove `address' element.

2009-03-29  Andreas Schwab  <[email protected]>

	* observer.sh: Set LANG/LC_ALL to C, not c.

2009-03-28  Kevin Buettner  <[email protected]>

	* mn10300-tdep.c (mn10300_gdbarch_init): For mn10300, by default,
	`char' is unsigned.

2009-03-28  Pedro Alves  <[email protected]>

	* remote.c (remote_stop_ns): If multi-process extensions are off,
	and GDB is requesting the whole process to stop, sent "vCont;t",
	not "vCont;t:-1"

2009-03-28  Pedro Alves  <[email protected]>

	* inf-loop.c (inferior_event_handler): Avoid calling is_running on
	null inferior_ptid.

2009-03-27  Eli Zaretskii  <[email protected]>

	* config/djgpp/fnchange.lst: Update to fix ARI-reported problems.

2009-03-26  Doug Evans  <[email protected]>

	* thread.c (do_restore_current_thread_cleanup): Redo test for
	whether to restore old->inferior_ptid.

2009-03-26  Tom Tromey  <[email protected]>

	* breakpoint.c (resolve_sal_pc): Preserve original line number
	when skipping prologue.

2009-03-26  Doug Evans  <[email protected]>

	* thread.c (inferior_thread) Remove "extern" in definition.

2009-03-26  Thiago Jung Bauermann  <[email protected]>

	Add gdb.Value.is_optimized_out attribute.
	* python/python-value.c (valpy_get_is_optimized_out): New
	function.
	(value_object_getset): New variable.
	(value_object_type): Initialize tp_getset element.

2009-03-26  Joel Brobecker  <[email protected]>

	Recognize missing DW_AT_location as <value optimized out>.
	* dwarf2read.c
	(new_symbol <DW_TAG_variable> <!DW_AT_location> <!DW_AT_external>):
	Call add_symbol_to_list.

2009-03-25  Tom Tromey  <[email protected]>

	* gdbtypes.h (CHECK_TYPEDEF): Don't yield a value.
	* stack.c (print_this_frame_argument_p): Use check_typedef.

2009-03-25  Tom Tromey  <[email protected]>

	* configure: Rebuild.
	* acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
	Rearrange flags setting.  Add comments.

2009-03-25  Pierre Muller  <[email protected]>

	* config/i386/nm-i386.h: Remove code within
	I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
	* config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
	macro.
	* config/i386/nm-cygwin64.h: Ditto.
	* config/i386/nm-fbsd.h: Ditto.
	* config/i386/nm-go32.h: Ditto.
	* config/i386/nm-linux.h: Ditto.
	* config/i386/nm-linux64.h: Ditto.

2009-03-25  Pierre Muller  <[email protected]>

	ARI fix: "xasprintf" rule.
	* printcmd.c (sym_info): Replace xasprintf by xstrprintf.

2009-03-25  Pedro Alves  <[email protected]>

	* remote.c (remote_start_remote): In non-stop mode, call
	init_wait_for_inferior before adding threads and inferiors.

2009-03-25  Joel Brobecker  <[email protected]>

	* breakpoint.c (breakpoint_thread_match): Split a large condition
	into several smaller conditions.  No behavior change.

2009-03-25  Pedro Alves  <[email protected]>

	* infrun.c (infrun_thread_thread_exit): New.
	(_initialize_infrun): Attach it to the thread_exit observer.
	* thread.c (delete_thread_1): Always call the observer, passing it
	the silent flag.
	* mi/mi-interp.c (mi_thread_exit): Add "silent" parameter.  If
	SILENT, return immediately.

2009-03-25  Pedro Alves  <[email protected]>

	* infrun.c (normal_stop): Use has_stack_frames instead of
	target_has_stack.
	* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
	when there is no thread selected.
	(mi_cmd_execute): Don't special case commands that can run without
	a valid selected thread.
	* top.c (execute_command): Don't special case commands that can
	run without a valid selected thread.  Use has_stack_frames.
	* infcmd.c (ensure_valid_thread): New.
	(continue_1, step_1, jump_command, signal_command): Use it.
	(detach_command): Error out if there's no selected thread/inferior.
	* thread.c (print_thread_info): Allow having no thread selected.
	(switch_to_thread): Don't read the PC if there is no current thread.
	(do_restore_current_thread_cleanup): Don't record the current
	frame if there is no current thread.
	(make_cleanup_restore_current_thread): Don't read frame info if
	there is no selected thread.
	(_initialize_thread): Don't mark commands as
	"no_selected_thread_ok".
	* frame.c (get_current_frame): Error out if there is no valid
	selected thread.
	(has_stack_frames): Return false if there is no valid
	selected thread.
	* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
	"no_selected_thread_ok".
	* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
	(get_cmd_no_selected_thread_ok): Delete.
	* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
	(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
	Delete declaration.
	* stack.c (get_selected_block): Use has_stack_frames.

2009-03-25  Thiago Jung Bauermann  <[email protected]>

	Fix size of FPSCR in Power 7 processors.
	* ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
	(PPC_FEATURE_HAS_DFP): New #define.
	(ppc_linux_read_description): Check for DFP feature instead of
	ISA 2.05 to decide on size of the FPSCR.

2009-03-25  Kevin Buettner  <[email protected]>

	* mn10300-tdep.c (trad-frame.h): Don't include.
	(prologue-value.h): Include.
	(mn10300_frame_unwind_cache, set_reg_offsets): Delete.
	(struct mn10300_prologue): Define.
	(push_reg, translate_rreg, check_for_saved): New functions.
	(mn10300_analyze_prologue): Rewrite, using prologue-value
	machinery.  Handle more instructions than before.  Permit
	instructions to occur in any order.
	(mn10300_skip_prologue): Find the extents of the function
	in question; mn10300_analyze_prologue no longer does this.
	(mn10300_analyze_frame_prologue): New function.
	(mn10300_frame_base): New function.
	(mn10300_frame_this_id): Rewrite, no longer using trad-frame
	implementation.
	(mn10300_frame_prev_register): Likewise.
	(mn10300_frame_base_address, mn10300_frame_base struct): Delete.
	(mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
	`this_frame'.
	(mn10300_frame_unwind_init): Don't call frame_base_set_default().

2009-03-25  Pierre Muller  <[email protected]>

	Fix completer problem for filename completion on the first try.

	* gdb/completer.h (gdb_completion_word_break_characters): New function.
	* gdb/completer.c: Include gdb_assert.h.
	(complete_line_internal_reason): New enum.
	(complete_line_internal): Change last argument type to
	complete_line_internal_reason.
	Modify function to handle the different complete_line_internal_reason
	argument values.
	(complete_line): Adapt to change in complete_line_internal.
	(command_completer): Ditto.
	(gdb_completion_word_break_characters): Implement new function.
	* top.c (init_main): Set  rl_completion_word_break_hook to
	gdb_completion_word_break_characters.


2009-03-25  Pierre Muller  <[email protected]>

	ARI fix: "strlen d_name" rule.
	* linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.


2009-03-24  Tom Tromey  <[email protected]>
	    Pedro Alves  <[email protected]>

	* configure, config.in: Rebuild.
	* configure.ac: Check for libiconvlist.
	* charset.c: Check HAVE_LIBICONVLIST.
	* acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
	LIBICONV_LIBDIR.  Update CPPFLAGS and LIBS.
	* Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
	Remove.
	(INTERNAL_CFLAGS_BASE): Update.
	(INTERNAL_LDFLAGS): Update.
	(CLIBS): Update.

2009-03-24  Jan Kratochvil  <[email protected]>

	* configure.ac: Initialize the variable $PREFER_CURSES.
	* configure: Regenerated.

2009-03-24  Jan Kratochvil  <[email protected]>

	* configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
	* configure: Regenerated.

2009-03-24  Pierre Muller  <[email protected]>

	ARI fix: "strerror" rule.
	* darwin-nat.c (darwin_ptrace): Use safe_strerror.
	(darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
	before looking up the fields inside our struct type.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
	trying to resolve the type qualification.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
	we try to apply the attribute on the real type, rather than
	its associated typedef.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
	to make sure we try to get the modulus of the actual type, not the
	associated typedef.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
	[OP_ATR_LENGTH]: When using the attribute on a type, make sure
	to get the real type, not the associated typedef.

2009-03-23  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_get_field_index): Add handling of the case
	when TYPE is a typedef of a struct.

2009-03-23  Joel Brobecker  <[email protected]>

	Add gdb_usleep as a portable version of usleep based on gdb_select.
	* gdb_usleep.h, gdb_usleep.c: New files.
	* Makefile.in (SFILES): Add gdb_usleep.c.
	(HFILES_NO_SRCDIR): Add gdb_usleep.h.
	(COMMON_OBS): Add gdb_usleep.o.
	* ser-unix.c (hardwire_send_break): Replace call to gdb_select
	by call to gdb_usleep.

2009-03-23  Joel Brobecker  <[email protected]>

	* buildsym.c (end_symtab): If we ignore the subfiles, then
	unlink the associated symtabs if they were already allocated.

2009-03-23  Jerome Guitton  <[email protected]>

	Provide a way to force building of GDB with libcurses.
	* configure.ac: Add --with-curses.
	* configure: Regenerated.

2009-03-23  Tom Tromey  <[email protected]>

	* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
	error message.

2009-03-23  Paul Pluzhnikov  <[email protected]>

	* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
	solib_contains_address_p instead of searching.

2009-03-23  Tom Tromey  <[email protected]>

	* charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
	(iconv): Make 'inbuf' argument const.
	(convert_between_encodings): Use ICONV_CONST.
	(wchar_iterate): Likewise.

2009-03-22  Christopher Faylor  <[email protected]>

	* windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
	dynamically loaded function.
	(LookupPrivilegeValueA): Ditto.
	(OpenProcessToken): Ditto.
	(AdjustTokenPrivileges): Rename and define placeholder for address of
	dynamically loaded function.
	(LookupPrivilegeValueA): Ditto.
	(OpenProcessToken): Ditto.
	(set_process_privilege): Remove check for loaded functions.
	(bad_OpenProcessToken): Define.
	(_initialize_loadable): Load token functions from advapi here, setting
	OpenProcessToken function to a dummy static function which always return
	error if OS doesn't support this functionality.

2009-03-22   Nicolas Roche  <[email protected]>
	     Christopher Faylor <[email protected]>

	* win32-nat.c (ctrl_c_handler): New function.
	(win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
	is run in a separate console.

2009-03-22  Christopher Faylor  <[email protected]>

	* windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
	for dynamically loaded function.
	(DebugBreakProcess): Ditto.
	(DebugSetProcessKillOnExit): Ditto.
	(EnumProcessModules): Ditto.
	(GetModuleFileNameExA): Ditto.
	(GetModuleInformation): Ditto.
	(DebugActiveProcessStop): Rename and define placeholder for address of
	dynamically loaded function.
	(DebugBreakProcess): Ditto.
	(DebugSetProcessKillOnExit): Ditto.
	(EnumProcessModules): Ditto.
	(GetModuleFileNameExA): Ditto.
	(GetModuleInformation): Ditto.
	(psapi_loaded): Delete.
	(get_module_name): Don't check psapi_loaded, just rely on the fact that
	dynamically loaded functions will return failure if they weren't
	previously found.
	(has_detach_ability): Delete.
	(windows_attach): Remove call to has_detach_ability ().  Just rely on
	functions being callable.
	(bad_DebugActiveProcessStop): Define.
	(bad_DebugBreakProcess): Ditto.
	(bad_DebugSetProcessKillOnExit): Ditto.
	(bad_EnumProcessModules): Ditto.
	(bad_GetModuleFileNameExA): Ditto.
	(bad_GetModuleInformation): Ditto.
	(_initialize_loadable): Rename from _initialize_psapi.  Initialize all
	dynamic storage here, setting nonexistent functions to dummy static
	functions which always return error.

2009-03-22  Pedro Alves  <[email protected]>

	* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
	to the about_to_proceed observer notification.
	(mi_about_to_proceed): New.
	(mi_on_resume): Only output ^running and the prompt here if the
	target was proceeded.
	* breakpoint.c (breakpoint_proceeded): New static.
	(breakpoint_about_to_proceed): New.
	(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
	the about_to_proceed observer notification.
	* inferior.h (breakpoint_proceeded): Delete declaration.
	* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
	Notify the about_to_proceed observers.
	(struct inferior_status): Delete breakpoint_proceeded member.
	(save_inferior_status): Don't save it.
	(restore_inferior_status): Don't restore it.
	* mi-main.h (mi_proceeded): Declare.
	* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
	a command.

2009-03-22  Pedro Alves  <[email protected]>

	* gdbthread.h (struct thread_info): Add in_infcall member.
	* infcall.c (run_inferior_call): Save, set and restore in_infcall.
	Remove reverences to suppress_resume_observer.  Refresh
	`call_thread' after returning from `proceed'.
	* infcmd.c (suppress_resume_observer): Delete.
	* inferior.h (suppress_resume_observer): Delete declaration.
	* mi/mi-interp.c (mi_on_resume): Suppress output while calling an
	inferior function.
	* thread.c (set_running): Remove references to
	suppress_resume_observer.
	* infrun.c (struct inferior_status): Add in_infcall member.
	(save_inferior_status): Save it.
	(restore_inferior_status): Restore it.

2009-03-22  Pedro Alves  <[email protected]>

	* infcall.c (run_inferior_call): Remove references to
	suppress_stop_observer.
	* infcmd.c (suppress_stop_observer): Delete.
	(finish_command_continuation): Remove NOTE.  Don't clear
	suppress_stop_observer anymore.
	(finish_command_continuation_free_arg): Likewise.
	(finish_forward): Remove references to suppress_stop_observer.
	Call normal_stop observer if we haven't already.
	* inferior.h (suppress_stop_observer): Delete.
	* infrun.c (normal_stop): When deciding to suppress the
	normal_stop observer, check for proceed_to_finish instead of
	suppress_stop_observer.

2009-03-22  Pedro Alves  <[email protected]>

	* symfile.c (symfile_relocate_debug_section): Remove check for
	SEC_DEBUGGING.

2009-03-21  Jan Kratochvil  <[email protected]>
	    Jim Blandy  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>
	    Tom Tromey  <[email protected]>

	Miscellaneous fixes to the Python code.
	* python/python-cmd.c (cmdpy_init): Accept keyword
	arguments.
	* python/python-value.c (valpy_string): Accept keyword
	arguments.
	(valpy_binop): Use `break' to exit from the TRY_CATCH block.
	Do not call value_to_value_object on NULL RES_VAL.
	(value_object_methods): Change `string' entry to also accept
	keyword arguments.
	(convert_value_from_python): Return a copy of the value if obj is
	a gdb.Value object.
	(value_object_methods): Mark the `string' method as accepting
	keywords, and show method "prototype" in the doc string.
	* python/python.c (get_parameter): Don't return inside a
	TRY_CATCH.

2009-03-20  Tom Tromey  <[email protected]>

	Add support for convenience functions in Python.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
	(SUBDIR_PYTHON_SRCS): Add python-function.c.
	(python-function.o): New target.
	* eval.c: Include "python/python.h" and <ctype.h>.
	(evaluate_subexp_standard): Handle values of type
	TYPE_CODE_INTERNAL_FUNCTION.
	* gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
	* parse.c (write_exp_string): Remove duplicate word in comment.
	* python/python-function.c: New file.
	* python/python-internal.h (gdbpy_initialize_functions): Add
	prototype.
	* python/python.c (_initialize_python): Call
	gdbpy_initialize_functions.
	* valprint.c (value_check_printable): Handle values of type
	TYPE_CODE_INTERNAL_FUNCTION.
	* value.c: Include "cli/cli-decode.h".
	(internal_function): New struct.
	(functionlist, internal_fn_type): New static variables.
	(lookup_only_internalvar,
	lookup_internalvar): Add const qualifier to name argument.
	(create_internalvar): Likewise.  Initialize new field.
	(set_internal_var): Fix typo in comment.  Don't allow assignment
	to canonical variable.
	(value_create_internal_function, value_internal_function_name,
	call_internal_function, function_command, function_destroyer,
	add_internal_function): New functions.
	(_initialize_values): Create `function' placeholder command.
	Initialize internal_fn_type.
	* value.h (lookup_only_internalvar, create_internalvar,
	lookup_internalvar): Add const qualifier to name argument.
	(internal_function_fn, add_internal_function, call_internal_function,
	value_internal_function_name): Add prototypes.
	(struct internalvar) <canonical>: New field.

2009-03-20  Tom Tromey  <[email protected]>

	* c-lang.c (evaluate_subexp_c): Call check_typedef.

2009-03-20  Tom Tromey  <[email protected]>
	    Julian Brown  <[email protected]>

	PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
	PR i18n/9401, PR exp/9613:
	* NEWS: Update
	* value.h (value_typed_string): Declare.
	(val_print_string): Update.
	* valprint.h (print_char_chars): Update.
	* valprint.c (print_char_chars): Add type argument.  Update.
	(val_print_string): Likewise.
	* valops.c (value_typed_string): New function.
	* utils.c (host_char_to_target): New function.
	(parse_escape): Use host_char_to_target, host_hex_value.  Update.
	Remove '^' case.
	(no_control_char_error): Remove.
	* typeprint.c (print_type_scalar): Update.
	* scm-valprint.c (scm_scmval_print): Update.
	* scm-lang.h (scm_printchar, scm_printstr): Update.
	* scm-lang.c (scm_printchar): Add type argument.
	(scm_printstr): Likewise.
	* printcmd.c (print_formatted): Update.
	(print_scalar_formatted): Update.
	(printf_command) <wide_string_arg, wide_char_arg>: New constants.
	Handle '%lc' and '%ls'.
	* parser-defs.h (struct typed_stoken): New type.
	(struct stoken_vector): Likewise.
	(write_exp_string_vector): Declare.
	* parse.c (write_exp_string_vector): New function.
	* p-valprint.c (pascal_val_print): Update.
	* p-lang.h (is_pascal_string_type, pascal_printchar,
	pascal_printstr): Update.
	* p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
	Add 'char_type' argument.
	(pascal_emit_char): Add type argument.
	(pascal_printchar): Likewise.
	(pascal_printstr): Likewise.
	* objc-lang.c (objc_emit_char): Add type argument.
	(objc_printchar): Likewise.
	(objc_printstr): Likewise.
	* macroexp.c (get_character_constant): Handle unicode characters.
	Use c_parse_escape.
	(get_string_literal): Handle unicode strings.  Use
	c_parse_escape.
	* m2-valprint.c (print_unpacked_pointer): Update.
	(m2_print_array_contents): Update.
	(m2_val_print): Update.
	* m2-lang.c (m2_emit_char): Add type argument.
	(m2_printchar): Likewise.
	(m2_printstr): Likewise.
	* language.h (struct language_defn) <la_printchar>: Add type
	argument.
	<la_printstr, la_emitchar>: Likewise.
	(LA_PRINT_CHAR): Likewise.
	(LA_PRINT_STRING): Likewise.
	(LA_EMIT_CHAR): Likewise.
	* language.c (unk_lang_emit_char): Add type argument.
	(unk_lang_printchar): Likewise.
	(unk_lang_printstr): Likewise.
	* jv-valprint.c (java_val_print): Update.
	* jv-lang.c (java_emit_char): Add type argument.
	* f-valprint.c (f_val_print): Update.
	* f-lang.c (f_emit_char): Add type argument.
	(f_printchar): Likewise.
	(f_printstr): Likewise.
	* expprint.c (print_subexp_standard): Update.
	* charset.h (target_wide_charset): Declare.
	(c_target_char_has_backslash_escape, c_parse_backslash,
	host_char_print_literally, host_char_to_target,
	target_char_to_host, target_char_to_control_char): Remove.
	(enum transliterations): New type.
	(convert_between_encodings): Declare.
	(HOST_ESCAPE_CHAR): New define.
	(host_letter_to_control_character, host_hex_value): Declare.
	(enum wchar_iterate_result): New enum.
	(struct wchar_iterator): Declare.
	(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
	wchar_push_back): Declare.
	* charset-list.h: New file.
	* c-valprint.c (textual_name): New function.
	(textual_element_type): Handle wide character types.
	(c_val_print): Pass original type to textual_element_type.  Handle
	wide character types.
	(c_value_print): Use textual_element_type.  Pass original type of
	value to val_print.
	* c-lang.h (enum c_string_type): New type.
	(c_printchar, c_printstr): Update.
	* c-lang.c (classify_type): New function.
	(print_wchar): Likewise.
	(c_emit_char): Add type argument.  Handle wide characters.
	(c_printchar): Likewise.
	(c_printstr): Add type argument.  Handle wide and multibyte
	character sets.
	(convert_ucn): New function.
	(emit_numeric_character): Likewise.
	(convert_octal): Likewise.
	(convert_hex): Likewise.
	(ADVANCE): New macro.
	(convert_escape): New function.
	(parse_one_string): Likewise.
	(evaluate_subexp_c): Likewise.
	(exp_descriptor_c): New global.
	(c_language_defn): Use exp_descriptor_c.
	(cplus_language_defn): Likewise.
	(asm_language_defn): Likewise.
	(minimal_language_defn): Likewise.
	(charset_for_string_type): New function.
	* c-exp.y (%union): Add 'svec' and 'tsval'.
	(CHAR): New token.
	(exp): Add CHAR production.
	(string_exp): Rewrite.
	(exp) <string_exp>: Rewrite.
	(tempbuf): Now global.
	(tempbuf_init): New global.
	(parse_string_or_char): New function.
	(yylex) <tempbuf>: Now global.
	<tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
	Remove.
	Handle 'u', 'U', and 'L' prefixes.  Call parse_string_or_char.
	(c_parse_escape): New function.
	* auxv.c (fprint_target_auxv): Update.
	* ada-valprint.c (ada_emit_char): Add type argument.
	(ada_printchar): Likewise.
	(ada_print_scalar): Update.
	(printstr): Add type argument.  Update calls to ada_emit_char.
	(ada_printstr): Add type argument.
	(ada_val_print_array): Update.
	(ada_val_print_1): Likewise.
	* ada-lang.c (emit_char): Add type argument.
	* ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
	type arguments.
	* gdb_locale.h: Include langinfo.h.
	* charset.c (_initialize_charset): Set default host charset from
	the locale.  Don't register charsets.  Add target-wide-charset
	commands.  Call find_charset_names.
	(struct charset, struct translation): Remove.
	(GDB_DEFAULT_HOST_CHARSET): Remove.
	(GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
	(target_wide_charset_name): New global.
	(show_host_charset_name): Handle "auto".
	(show_target_wide_charset_name): New function.
	(host_charset_enum, target_charset_enum): Remove.
	(charset_enum): New global.
	(all_charsets, register_charset, lookup_charset, all_translations,
	register_translation, lookup_translation): Remove.
	(simple_charset, ascii_print_literally, ascii_to_control): Remove.
	(iso_8859_print_literally, iso_8859_to_control,
	iso_8859_family_charset): Remove.
	(ebcdic_print_literally, ebcdic_to_control,
	ebcdic_family_charset): Remove.
	(struct cached_iconv, check_iconv_cache, cached_iconv_convert,
	register_iconv_charsets): Remove.
	(target_wide_charset_be_name, target_wide_charset_le_name): New
	globals.
	(identity_either_char_to_other): Remove.
	(set_be_le_names, validate): New functions.
	(backslashable, backslashed, represented): Remove.
	(default_c_target_char_has_backslash_escape): Remove.
	(default_c_parse_backslash, iconv_convert): Remove.
	(ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
	ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
	iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
	ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
	ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
	ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
	(table_convert_char, table_translation, simple_table_translation):
	Remove.
	(current_host_charset, current_target_charset,
	c_target_char_has_backslash_escape_func,
	c_target_char_has_backslash_escape_baton): Remove.
	(c_parse_backslash_func, c_parse_backslash_baton): Remove.
	(host_char_to_target_func, host_char_to_target_baton): Remove.
	(target_char_to_host_func, target_char_to_host_baton): Remove.
	(cached_iconv_host_to_target, cached_iconv_target_to_host):
	Remove.
	(lookup_charset_or_error, check_valid_host_charset): Remove.
	(set_host_and_target_charsets): Remove.
	(set_host_charset, set_target_charset): Remove.
	(set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
	(set_target_wide_charset_sfunc): New function.
	(show_charset): Print target wide character set.
	(host_charset, target_charset): Rewrite.
	(target_wide_charset): New function.
	(c_target_char_has_backslash_escape): Remove.
	(c_parse_backslash): Remove.
	(host_letter_to_control_character): New function.
	(host_char_print_literally): Remove.
	(host_hex_value): New function.
	(target_char_to_control_char): Remove.
	(cleanup_iconv): New function.
	(convert_between_encodings): New function.
	(target_char_to_host): Remove.
	(struct wchar_iterator): Define.
	(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
	wchar_push_back): New functions.
	(do_cleanup_iterator): New function.
	(char_ptr): New typedef.
	(charsets): New global.
	(add_one, find_charset_names): New functions.
	(default_charset_names): New global.
	(auto_host_charset_name): Likewise.
	* aclocal.m4, config.in, configure: Rebuild.
	* configure.ac: Call AM_LANGINFO_CODESET.
	(GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
	(AM_ICONV): Invoke earlier.
	* acinclude.m4: Include codeset.m4.  Subst LIBICONV_INCLUDE and
	LIBICONV_LIBDIR.  Check for libiconv in build tree.
	* Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
	(INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
	(INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
	* gdb_obstack.h (obstack_grow_wstr): New define.
	* gdb_wchar.h: New file.
	* defs.h: Include it.

2009-03-20  Tom Tromey  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	* dwarf2read.c (process_die): Handle DW_TAG_typedef.
	* eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
	typedef.
	* ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
	SYMBOL_TYPE result.
	* ada-typeprint.c (print_array_type): Do the NULL check
	unconditionally.

2009-03-19  Tom Tromey  <[email protected]>

	* utils.c (do_obstack_free): New function.
	(make_cleanup_obstack_free): Likewise.
	* defs.h (make_cleanup_obstack_free): Declare.

2009-03-18  Doug Evans  <[email protected]>

	* linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
	int, not a long long.
	(linux_nat_info_proc_cmd): Store pid in long instead of long long.

	* expprint.c (dump_raw_expression): Print note if non-NULL.

	* printcmd.c (display_uses_solib_p): Redo loop, scan element list
	backwards.

2009-03-18  Nathan Sidwell  <[email protected]>

	* Makefile.in: Update license to GPLv3.
	* ada-exp.y: Update license to GPLv3.
	* ada-lex.l: Update license to GPLv3.
	* c-exp.y: Update license to GPLv3.
	* cp-name-parser.y: Update license to GPLv3.
	* darwin-nat-info.c: Update license to GPLv3.
	* f-exp.y: Update license to GPLv3.
	* gdb_thread_db.h: Update license to GPLv3.
	* hppanbsd-nat.c: Update license to GPLv3.
	* hppanbsd-tdep.c: Update license to GPLv3.
	* hppaobsd-tdep.c: Update license to GPLv3.
	* jv-exp.y: Update license to GPLv3.
	* m2-exp.y: Update license to GPLv3.
	* objc-exp.y: Update license to GPLv3.
	* p-exp.y: Update license to GPLv3.
	* reply_mig_hack.awk: Update license to GPLv3.
	* reverse.c: Update license to GPLv3.
	* xtensa-xtregs.c: Update license to GPLv3.

2009-03-18  Pedro Alves  <[email protected]>

	* remote.c (remote_close): Don't call generic_mourn_inferior.
	(remote_mourn_1): Call generic_mourn_inferior after closing the
	target.

2009-03-18  Pedro Alves  <[email protected]>

	* remote.c (remote_start_remote): Add missing call to
	init_wait_for_inferior in non-stop mode.

2009-03-18  Pedro Alves  <[email protected]>

	* breakpoint.c (bpstat_should_step): Only consider software
	watchpoints that have a location.

2009-03-17  Joel Brobecker  <[email protected]>

	Add a target_ops parameter to the to_kill method in struct target_ops.

	* target.h (struct target_ops): Add a "target_ops *" parameter to
	method to_kill.
	(target_kill): Remove macro. Add declaration.
	* target.c (debug_to_kill): Delete, no longer necessary.
	(target_kill): New function.
	(update_current_target):  Stop inheriting the to_kill method.
	Do not de_fault it to no_process either.
	(setup_target_debug): Do not set current_target.to_kill.
	* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
	linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
	remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
	accordingly.

2009-03-17  Doug Evans  <[email protected]>

	* amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
	glibc 2.3.2 and earlier.

2009-03-17  Joel Brobecker  <[email protected]>

	* frame.c (get_prev_frame_1): Do not perform the inner_frame
	sanity check if this_frame is not NORMAL.
	(frame_id_inner): Update the description of this function.

2009-03-17  Hui Zhu  <[email protected]>

	* stack.c: Change the introduce of "disassemble-next-line".

2009-03-17  Pedro Alves  <[email protected]>

	* mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
	declare as extern.

2009-03-17  Hui Zhu  <[email protected]>

	* stack.c: Include valprint.h.
	(disassemble_next_line): New enum.
	(show_disassemble_next_line): New function.  Show the current
	value of disassemble-next-line.
	(gdb_disassembly_stub_args): New struct for argument passing
	between function do_gdb_disassembly and function
	gdb_disassembly_stub.
	(gdb_disassembly_stub): New function.  Helper for
	gdb_disassembly.
	(do_gdb_disassembly): New function.  Use TRY_CATCH to catch
	the exception from the gdb_disassembly because it will be
	broken by filter sometime.
	(print_frame_info): If disassemble-next-line is set to auto
	or on and doesn't have the line debug messages for $pc,
	output the next instruction.
	If disassemble-next-line is set to on and there is line debug
	messages, output assembly codes for next line.
	(_initialize_stack): Make the "set disassemble-next-line"
	command an auto-boolean command.  Change its class to
	class_stack.  Place it in the top level set list.  Extend help
	to describe the auto mode.

2009-03-17  Pedro Alves  <[email protected]>

	* infrun.c (normal_stop): Don't overwrite old_chain.

2009-03-16  Joel Brobecker  <[email protected]>

	* remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
	which is undefined, by call to regcache_invalidate, which should
	do what the original author wanted to do.

2009-03-16  Joel Brobecker  <[email protected]>

	* remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
	(mips_create_inferior): Likewise.

2009-03-16  Joel Brobecker  <[email protected]>

	* go32-nat.c (go32_create_inferior): Add missing ops parameter.

2009-03-16  Joel Brobecker  <[email protected]>

	* darwin-nat.c (darwin_resume): Fix a compiler warning when
	building on x86_64-darwin.

2009-03-16  Tristan Gingold  <[email protected]>

	* configure.tgt: Add handling for x86_64-darwin.

2009-03-16  Jan Kratochvil  <[email protected]>

	* auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.

2009-03-15  Joel Brobecker  <[email protected]>

	* aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
	Use the ops parameter to get to the target beneath, rather than
	using the current_target global.  Using the current_target global
	was an unintended accident.

2009-03-15  Joel Brobecker  <[email protected]>

	Fix an error happening while loading symbols from a core file
	(on AIX).

	* rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
	to detect whether we're debugging a core file or not.

2009-03-15  Joel Brobecker  <[email protected]>

	Modernize the aix-thread later by getting rid of the base_target
	global.  This brings back to life the AIX port which was otherwise
	crashing all the time.

	* aix-thread.c (base_target): Delete.
	(pd_enable): Do not set base_target.
	(aix_thread_attach): Use find_target_beneath instead of base_target.
	(aix_thread_detach, aix_thread_resume, aix_thread_wait)
	(aix_thread_fetch_registers, aix_thread_store_registers),
	(aix_thread_xfer_partial, aix_thread_mourn_inferior)
	(aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
	(aix_thread_kill): Delete. Does not seem necessary.
	(init_aix_thread_ops): Do not set aix_thread_ops.to_kill.

2009-03-15  Jan Kratochvil  <[email protected]>

	* stack.c (return_command <retval_exp>): New variables retval_expr
	and old_chain.  Inline parse_and_eval to initialize retval_expr.  Check
	RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
	if RETURN_TYPE is NULL.

2009-03-14  Pedro Alves  <[email protected]>

	* remote.c (PACKET_qAttached): New.
	(remote_query_attached): New.
	(remote_add_inferior): Add new `attached' argument.  Handle it.
	(remote_notice_new_inferior, remote_start_remote): Adjust to pass
	-1 to remote_add_inferior in new parameter.
	(extended_remote_attach_1): Adjust to pass 1 to
	remote_add_inferior in the new parameter.
	(extended_remote_create_inferior_1): Adjust to pass 0 to
	remote_add_inferior in the new parameter.
	(_initialize_remote): Add "set/show remote query-attached-packet"
	commands.

2009-03-13  Tom Tromey  <[email protected]>

	* symtab.c (lookup_symbol_in_language): Use a cleanup.

2009-03-13  Doug Evans  <[email protected]>

	* exceptions.h: Clean up some comments on catch_exceptions usage.
	* exceptions.c: Ditto.  Plus mark catch_errors as superseded by
	catch_exceptions.

2009-02-17  Joel Brobecker  <[email protected]>

	The following patch helps getting rid of a warning inside solib-som.c.

	* source.c (source_full_path_of): Constify parameter filename.
	* defs.h (source_full_path_of): Update declaration accordingly.

2009-03-12  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
	BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
	Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
	promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.

2009-03-12  Joel Brobecker  <[email protected]>

	* ada-tasks.c (ada_task_is_alive): Move up and make static.
	* ada-lang.h (ada_task_is_alive): Remove declaration.

2009-03-12  Jerome Guitton  <[email protected]>

	* ada-lang.c (ada_delta): Change the type of numerators and
	denominators to DOUBLEST, as they may not fit into a long.
	(scaling_factor): Ditto.

2009-03-12  Jerome Guitton  <[email protected]>

	* language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.

2009-03-12  Joel Brobecker  <[email protected]>

	* ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
	types, if we are unable to determine the actual symbol type
	from its tag, then use the static approximation instead.

2009-03-12  Joel Brobecker  <[email protected]>

	Fix crash printing packed record with packed array.

	* ada-lang.c (ada_modulus_from_name): New function.
	(ada_modulus): In the case where the type length is bigger than
	the size of the type used to hold the bounds, try determining
	the modulus from the type name.
	(ada_value_primitive_packed_val): Fix bug in the computation of
	ntarg causing an out-of-buffer invalid access.

2009-03-12  Joel Brobecker  <[email protected]>

	Fix segfault when printing short_integer'last.

	* ada-lang.c (ada_find_any_type): Search in the primitive types
	if a symbol could not be found.

2009-03-12  Joel Brobecker  <[email protected]>

	* ada-tasks.c (task_states,long_task_states): Add new states
	Activating and Acceptor_Delay_Sleep.  Update the description
	of state Acceptor_Sleep.

2009-03-12  Jonas Maebe <[email protected]>  (obvious change)

	Fix a build failure on Darwin following some changes in
	the profile of some target_ops methods.

	* darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
	where missing.
	(darwin_stop_inferior, darwin_detach): Likewise.

2009-03-12  Vladimir Prus  <[email protected]>

	Include token in ^running notification for CLI commands.

	* mi/mi-main.c (mi_execute_command): Set current_token here.
	(mi_cmd_execute): Do not set current_token here.

2009-03-12  Vladimir Prus  <[email protected]>

	Fix MI timings.

	* mi/mi-main.c (mi_print_timing_maybe): New.
	(captured_mi_execute_command): Simplify. Output timings to
	CLI commands, too.
	(mi_execute_async_cli_command): Do not print timings.
	* mi/mi-main.h (mi_print_timing_maybe): Declare.
	* mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.

2009-03-12  Jerome Guitton  <[email protected]>

	* xcoffread.c (process_linenos): Check if the line in the
	include table refers to the main source file and, if so,
	add them to the main subfile.

2009-03-12  Joel Brobecker  <[email protected]>

	Fix a build failure on AIX introduced after a change in the profile
	of some of the "methods" in the target_ops structure.
	* aix-thread.c: Add missing target_ops parameter throughout.

	Implement Ada task switching on AIX.
	* aix-thread.c (aix_thread_get_ada_task_ptid): New function.
	(init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.

2009-03-11  Daniel Jacobowitz  <[email protected]>

	* breakpoint.c (bpstat_check_breakpoint_conditions): Use
	value_mark and value_free_to_mark.
	* objfiles.c (free_objfile): Call objfile_free_data before
	freeing the BFD.

2009-03-10  Hui Zhu  <[email protected]>

	* disasm.c (gdb_disassembly): Remove unused argument
	"line_num".
	* disasm.h (gdb_disassembly): Ditto.
	* cli/cli-cmds.c (print_disassembly): Ditto.
	* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.

2009-03-09  Paul Pluzhnikov  <[email protected]>

	* solib.c (solib_contains_address_p): New function.
	(solib_name_from_address): Use it.
	* printcmd.c (display_uses_solib_p): Use it.
	* solib.h (solib_contains_address_p): Declare it.

2009-03-09  Jan Kratochvil  <[email protected]>

	* varobj.c (free_variable): Call value_free.

2009-03-09  Jan Kratochvil  <[email protected]>

	PR gdb/9873:
	* dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
	Move the variable `macinfo_type' out of the loop.  Create a new
	processing pass before the current one to pre-create `current_file'.
	New complaint on misplaced zero/non-zero definitions/includes.
	Skip first DW_MACINFO_start_file with `at_commandline' set.

2008-03-09  Vladimir Prus  <[email protected]>

       * solib.c (reload_shared_libraries): Give
       inferior a chance to reset solib breakpoint.
       Reinit frame cache.

2009-03-08  Christopher Faylor  <[email protected]>

	* windows-nat.c (dr): Redefine to use largest possible integer which
	holds a pointer.
	(cygwin_set_dr): Avoid coercion.

2009-03-08  Oswald Buddenhagen  <[email protected]>

	* windows-nat.c (windows_create_inferior): Implement --tty handling on
	non-cygwin.

2009-03-06  Paul Pluzhnikov  <[email protected]>

	Rename solib_address to solib_name_from_address.
	* breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
	(disable_breakpoints_in_unloaded_shlib): Update.
	* printcmd.c (display_uses_solib_p): Likewise.
	* stack.c (print_frame): Likewise.
	* solib.c: Rename.
	* solib.h: Rename.

2009-03-05  Paul Pluzhnikov  <[email protected]>

	* printcmd.c (do_one_display): Reparse exp_string.
	(display_uses_solib_p): New function.
	(clear_dangling_display_expressions): New function.
	(_initialize_printcmd): Add observer.
	* solib.c (no_shared_libraries): Swap order of calls to
	clear_solib and objfile_purge_solibs.

2009-03-05  Joel Brobecker  <[email protected]>

	Implement the target-specific part of Ada tasking support
	on Tru64.

	* dec-thread.c (dec_thread_get_ada_task_ptid): New function.
	(init_dec_thread_ops): Set the to_get_ada_task_ptid method.

2009-03-05  Joel Brobecker  <[email protected]>

	Get rid of the global "base_target" and use "find_target_beneath"
	to find the underlying target.
	* dec-thread.c (base_target): Delete.
	(enable_dec_thread): Remove assignement to base_target.
	(dec_thread_detach, dec_thread_wait, dec_thread_wait)
	(dec_thread_fetch_registers, dec_thread_store_registers)
	(dec_thread_mourn_inferior, dec_thread_pid_to_str):
	Update the function profile if necessary.
	Use find_target_beneath to call the same method but from
	the underlying target, removing the need for "base_target".

	* dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
	Fix a copy/paste error in a few debug traces...

	* solib-osf.c (init_so): Use a simpler method for computing
	the size of lm_info structure. This also gets rid of warning
	emitted by the compiler.

2009-03-05  Pedro Alves  <[email protected]>

	* breakpoint.c (check_duplicates_for): Skip permanent breakpoints
	duplicates of permanent breakpoints.

2009-03-04  Pedro Alves  <[email protected]>

	* inferior.h (notice_new_inferior): Declare.
	* infcmd.c (notice_new_inferior): New.
	* remote.c (remote_add_inferior, remote_add_thread): New.
	(notice_new_inferiors): Rename to...
	(remote_notice_new_inferior): ... this.  Add RUNNING argument.
	Use remote_add_thread instead of add_thread, passing it the
	RUNNING argument.  Add an inferior with remote_add_inferior.  If
	we just learned about an inferior, call notice_new_inferior.
	(record_currthread): Adjust.
	(remote_threads_info): Adjust to use remote_notice_new_inferior.
	(remote_start_remote, extended_remote_attach_1): Use
	remote_add_inferior.
	(process_stop_reply): Adjust.  Call remote_notice_new_inferior
	after handling expedited registers and watchpoint state.
	(extended_remote_create_inferior_1): Use remote_add_inferior.

2009-03-04  Aleksandar Ristovski  <[email protected]>

	* infcmd.c (registers_info): Remove register number case.

2009-03-03  Pedro Alves  <[email protected]>

	* top.c (quit_target): Check for target_has_execution before
	killing or detaching from inferiors.

2009-03-02  Joel Brobecker  <[email protected]>

	Remove some unused routines.

	* ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
	Delete.
	* ada-lang.c (ada_task_list_iterator_ftype)
	(iterate_over_live_ada_tasks): Delete.
	* ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
	Delete.

2009-03-01  Doug Evans  <[email protected]>

	* symtab.c: Remove trailing whitespace throughout the file.
	(expand_line_sal): Fix some typos and whitespace.

	* Makefile.in (clean): rm -f $(DEPDIR)/*.

	* Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
	(init.c): signals/ -> common/.
	(signals.o): Update.
	* target.h (target_signal_to_string,target_signal_to_string)
	(target_signal_from_name,target_signal_to_host_p)
	(target_signal_from_host,target_signal_to_host): Move to ...
	* common/gdb_signals.h: ... here.  New file.
	* common/signals.c: Moved here from signals/signals.c.
	#include gdb_signals.h, remove #include of target.h in gdb case.
	(target_signal_from_command,default_target_signal_to_host)
	(default_target_signal_from_host): Move inside #ifndef GDBSERVER.

	Include thread ID in target_wait debugging output.
	* infrun.c (print_target_wait_results): New function.
	(wait_for_inferior,fetch_inferior_event): Call it.

2009-02-27  Pedro Alves  <[email protected]>

	* gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
	with a ptid_t field.
	* linux-thread-db.c (thread_get_info_callback): Build the ptid
	using the pid stored in proc_handle.ptid.
	(thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
	(check_for_thread_db, thread_db_detach, check_event)
	(thread_db_mourn_inferior, find_new_threads_callback)
	(thread_db_find_new_threads_1): Adjust.
	* proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
	(ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.

2009-02-27  Phil Muldoon  <[email protected]>

	* valprint.c (read_string): Rework clean-up logic. Use
	free_current_contents to clean-up buffer.

2009-02-27  Andreas Schwab  <[email protected]>

	* MAINTAINERS: Update e-mail address.

2009-02-26  Phil Muldoon  <[email protected]>

	* python/python-utils.c (python_string_to_unicode): Always return
	a new reference.
	(python_string_to_target_string): Decrement transient python
	instance.
	(python_string_to_host_string): Likewise.

2007-02-26  Pedro Alves  <[email protected]>

	* mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
	call to super_fetch_registers.
	(mips64_linux_store_registers): Pass `ops' to call to
	super_store_registers.

2009-02-25  Doug Evans  <[email protected]>

	* breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
	error message.

	* breakpoint.c (disable_breakpoints_in_shlibs): Delete local
	disabled_shlib_breaks, unused.

	* printcmd.c (build_address_symbolic): Fix comment.

2009-02-25  Hui Zhu  <[email protected]>

	* cli/cli-script.c (define_command): Add _() to query.
	* gnu-nat.c (inf_validate_task_sc): Ditto.
	* infcmd.c (kill_if_already_running): Ditto.
	(jump_command): Ditto.
	(attach_command): Ditto.
	* inflow.c (kill_command): Ditto.
	* infrun.c (handle_command): Ditto.
	* maint.c (maintenance_dump_me): Ditto.
	* memattr.c (mem_delete_command): Ditto.
	* monitor.c (monitor_interrupt_query): Ditto.
	* nto-procfs.c (interrupt_query): Ditto.
	* printcmd.c (undisplay_command): Ditto.
	* remote-mips.c (mips_kill): Ditto.
	* remote.c (interrupt_query): Ditto.
	* solib-irix.c (irix_open_symbol_file_object): Ditto.
	* solib-osf.c (osf_open_symbol_file_object): Ditto.
	* solib-pa64.c (pa64_open_symbol_file_object): Ditto.
	* solib-som.c (som_open_symbol_file_object): Ditto.
	* solib-svr4.c (open_symbol_file_object): Ditto.
	* symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
	* target.c (kill_or_be_killed): Ditto.
	* tracepoint.c (delete_trace_command): Ditto.
	* top.c (quit_confirm): Add _() to s that will be used
	in query.

2009-02-24  Pierre Muller  <[email protected]>

	Fix windows-nat.c compilation failure.

	* windows-nat.c (windows_thread_alive): Fix forward declaration.
	(get_windows_debug_event): Add ops parameter to call to windows_resume.

2009-02-23  Pedro Alves  <[email protected]>

	* remote-sim.c (gdbsim_resume): Add target_ops* argument.

2009-02-23  Jay Krell  <[email protected]>  (tiny change)

	* symtab.c (find_line_symtab): Initialize exact to avoid
	a compiler warning.

2009-02-23  Pedro Alves  <[email protected]>

	* i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
	`ops' to recursive call.

2009-02-23  Pedro Alves  <[email protected]>

	* corelow.c (get_core_registers): Adjust.
	(core_file_thread_alive): Rename to...
	(core_thread_alive): ... this.
	(core_pid_to_str): Try gdbarch_core_pid_to_str first.
	(init_core_ops): Adjust.
	(coreops_suppress_target): Delete.
	(_initialize_corelow): Unconditionally add core_ops.
	* procfs.c: Include "inf-child.h".
	(procfs_ops): Delete.
	(init_procfs_ops): Delete.  Reimplement as...
	(procfs_target): ... this, inheriting from inf-child.
	(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
	(procfs_prepare_to_store): Delete.
	(procfs_store_registers, procfs_resume): Adjust.
	(procfs_open): Delete.
	(procfs_suppress_run): Delete.
	(procfs_can_run): Delete.
	(procfs_mourn_inferior): Adjust.
	(procfs_init_inferior): Add target_ops parameter.  Adjust.
	(procfs_create_inferior): Don't pass procfs_init_inferior to
	fork_inferior.  Instead call it after fork_inferior returns.
	(procfs_find_new_threads): Adjust.
	(_initialize_procfs): Adjust to use procfs_target instead of
	init_procfs_ops.
	* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
	(lwp_to_thread): Use target_thread_alive.
	(sol_thread_open): Delete.
	(sol_thread_attach): Delete.
	(sol_thread_detach, sol_thread_resume, sol_thread_wait)
	(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
	to use find_target_beneath.
	(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
	(sol_thread_xfer_partial): Adjust to use find_target_beneath.
	(sol_thread_files_info, sol_thread_kill_inferior): Delete.
	(check_for_thread_db): New.
	(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
	(sol_thread_new_objfile): Call check_for_thread_db.
	(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
	(sol_thread_can_run): Delete.
	(sol_thread_alive): Adjust to use find_target_beneath.
	(sol_thread_stop): Delete.
	(rw_common): Use target_write_memory or target_read_memory.
	(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
	(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
	(solaris_pid_to_str): Remove check for libthread_db initialization
	failing.
	(sol_find_new_threads): Remove check for libthread_db
	initialization failing, or for an invalid inferior_ptid.  Adjust
	to use find_target_beneath.
	(sol_core_open, sol_core_close, sol_core_detach,
	sol_core_files_info, sol_find_memory_regions,
	sol_make_note_section, ignore): Delete.
	(init_sol_thread_ops): Make it a thread_stratum target.  Remove
	unneeded callback settings.
	(init_sol_core_ops): Delete.
	(_initialize_sol_thread): No longer call init_sol_core_ops, set
	procfs_suppress_run, or hack with core_ops.

	* target.h (struct target_ops): Add a target_ops * parameter to
	to_resume, to_fetch_registers, to_store_registers, to_thread_alive
	and to_find_new_threads.
	(target_fetch_registers, target_store_registers)
	(target_thread_alive, target_find_new_threads): Redeclare as
	function.

	* target.c (update_current_target): Do not inherit or de_fault
	to_resume, to_fetch_registers, to_store_registers,
	to_thread_alive, to_find_new_threads.
	(target_resume): Adjust.
	(target_thread_alive, target_find_new_threads): New.
	(debug_to_resume, debug_to_fetch_registers): Delete.
	(target_fetch_registers): New.
	(debug_to_store_registers): Delete.
	(target_store_registers): New.
	(debug_to_thread_alive, debug_to_find_new_threads): Delete.
	(setup_target_debug): Adjust.

	* gdbcore.h (core_ops): Delete declaration.

	* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
	inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
	i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
	hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
	nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
	alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
	bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
	hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
	ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
	m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
	mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
	ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
	shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
	vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.

	* gdbarch.sh (core_pid_to_str): New gdbarch callback.
	* gdbarch.h, gdbarch.c: Regenerate.

	* sol2-tdep.c: Include "inferior.h".
	(sol2_core_pid_to_str): New.
	* sol2-tdep.h (sol2_core_pid_to_str): Declare.

	* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
	* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
	* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
	* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.

2009-02-22  Doug Evans  <[email protected]>

	* exec.c (exec_file_attach): Fix comment.

2009-02-22  Pedro Alves  <[email protected]>

	Silence a few -Wmissing-prototypes warnings.

	PR build/9877:
	* alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
	it static.
	* alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
	* amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
	* amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
	(_initialize_amd64nbsd_tdep): ... this.
	* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
	(_initialize_arm_linux_tdep): Declare.
	* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
	* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
	* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
	* avr-tdep.c (avr_return_value): Make it static.
	(avr_frame_unwind_cache): Ditto.
	* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
	(bsd_uthread_solib_loaded): Ditto.
	(bsd_uthread_solib_unloaded): Ditto.
	(bsd_uthread_target): Ditto.
	(_initialize_bsd_uthread): Declare.
	* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
	(cris_frame_unwind_cache): Ditto.
	* frv-tdep.c (frv_return_value): Ditto.
	* h8300-tdep.c (h8300_use_struct_convention): Ditto.
	(h8300h_use_struct_convention): Ditto.
	* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
	Ditto.
	* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
	declarations.
	* hppabsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_find_global_pointer): Make it static.
	* hppabsd-tdep.h: New.
	* hppanbsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Remove declaration.
	(_initialize_hppabsd_tdep): Remove declaration.
	(_initialize_hppanbsd_tdep): Declare.
	* hppaobsd-tdep.c: Include hppabsd-tdep.h.
	(hppabsd_init_abi): Delete declaration.
	(hppaobsd_init_abi): Make it static.
	* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
	* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
	* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
	* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
	* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
	* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
	(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
	(_initialize_m32c_tdep): Declare.
	* m32r-rom.c (_initialize_m32r_rom): Declare.
	* m32r-tdep.c (m32r_skip_prologue): Make it static.
	(m32r_return_value): Ditto.
	* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
	(m68hc11_return_value): Ditto.
	* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
	* m88k-tdep.c (m88k_frame_cache): Make it static.
	* mep-tdep.c (mep_gdb_print_insn): Ditto.
	(mep_return_value): Ditto.
	(_initialize_mep_tdep): Declare.
	* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
	* mips-linux-tdep.c (supply_64bit_reg): Make it static.
	(mips_linux_syscall_next_pc): Ditto.
	(_initialize_mips_linux_tdep): Declare.
	* mips-tdep.c (mips_single_step_through_delay): Make it static.
	* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
	* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
	* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
	* mt-tdep.c (_initialize_mt_tdep): Declare.
	* nbsd-tdep.c: Include nbsd-tdep.h.
	* nto-tdep.c (find_load_phdr): Make it static.
	(_initialize_nto_tdep): Declare.
	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
	static.
	(_initialize_ppc_linux_tdep): Declare.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
	(m32r_insert_watchpoint, m32r_remove_watchpoint)
	(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
	static.
	* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
	* rs6000-nat.c: Include xcoffread.h.
	(find_toc_address): Don't extern declare get_toc_offset.  Adjust
	to call xcoff_get_to_offset.
	* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
	(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
	(rs6000_skip_trampoline_code): Make static.
	* s390-tdep.c (s390_regset_from_core_section): Ditto.
	* sh-tdep.c (sh_register_reggroup_p): Ditto.
	* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
	(_initialize_shnbsd_tdep): Declare.
	* solib-frv.c (displacement_from_map): Make static.
	(_initialize_frv_solib): Declare.
	* solib-irix.c (fetch_lm_info): Make static.
	(_initialize_irix_solib): Declare.
	* solib-som.c: Include solib-som.h.
	(som_solib_select): Line break.
	* sparc-tdep.c (sparc_regset_from_core_section): Make static.
	* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
	(_initialize_sparcnbsd_tdep): ... this.
	* spu-tdep.c (spu_software_single_step): Make it static.
	(_initialize_spu_tdep): Declare.
	* vax-tdep.c (vax_frame_cache): Make it static.
	* xcoffread.c: Include xcoffread.h.
	(get_toc_offset): Rename to ...
	(xcoff_get_toc_offset): ... this.
	(_initialize_xcoffread): Declare.
	* xcoffread.h: New.
	* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
	* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
	static.
	(_initialize_xtensa_tdep): Declare.

2008-02-21  Pedro Alves  <[email protected]>

	Silence a few -Wmissing-prototypes warnings.

	PR build/9877:
	* amd64-nat.c: Include "amd64-nat.h".
	* fork-child.c (_initialize_fork_child): Ditto.
	* gcore.c (_initialize_gcore): Ditto.
	* inf-ptrace.c: Include "inf-ptrace.h".
	(inf_ptrace_store_registers): Make it static.
	* linux-nat.c (linux_nat_terminal_ours): Make it static.
	(_initialize_linux_nat): Declare before definition.
	* linux-tdep.c: Include "linux-tdep.h".
	* linux-thread-db.c (_initialize_thread_db): Declare before
	definition.
	* proc-service.c (_initialize_proc_service): Ditto.
	* remote.c (remote_send_printf): Make it static.
	* solib.c: Include "solib.h".
	* symfile-mem.c (_initialize_symfile_mem): Declare before
	definition.
	* ada-lang.c (ada_la_decode, ada_match_name)
	(ada_suppress_symbol_printing, ada_is_array_type)
	(ada_value_ptr_subscript, ada_array_length)
	(ada_to_static_fixed_value): Make them static.
	(_initialize_ada_language): Declare before definition.
	* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
	(ada_task_list_changed, ada_new_objfile_observer): Make them
	static.
	(_initialize_tasks): Declare before definition.
	* addrmap.c (_initialize_addrmap): Declare before definition.
	* auxv.c (default_auxv_parse): Make it static.
	* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
	them static.
	* breakpoint.c (remove_sal): Add line break.
	(expand_line_sal_maybe): Make it static.
	* cp-name-parser.y: Include "cp-support.h".
	* cp-valprint.c (cp_find_class_member): Make it static.
	* eval.c (value_f90_subarray): Ditto.
	* exceptions.c (print_any_exception): Ditto.
	* findcmd.c (_initialize_mem_search): Declare before definition.
	* frame.c (frame_observer_target_changed): Make it static.
	* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
	* inf-child.c: Include "inf-child.h".
	* inferior.h (valid_inferior_id): Rename to ...
	(valid_gdb_inferior_id): ... this.
	* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
	Make them static.
	* jv-lang.c (java_language_arch_info): Make it static.
	* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
	* osdata.c (info_osdata_command): Make it static.
	* regcache.c (regcache_observer_target_changed): Make it static.
	* reverse.c (_initialize_reverse): Declare before definition.
	* stabsread.c (cleanup_undefined_types_noname)
	(cleanup_undefined_types_1): Make them static.
	* symfile.c (place_section): Make it static.
	* symtab.c (find_pc_sect_psymtab_closer): Make it static.
	* target-descriptions.c (_initialize_target_descriptions): Declare
	before definition.
	* target.c (default_get_ada_task_ptid, find_default_can_async_p)
	(find_default_is_async_p, find_default_supports_non_stop): Make
	them static.
	(target_supports_non_stop): Add prototype.
	(dummy_pid_to_str): Make it static.
	* utils.c (_initialize_utils): Declare before definition.
	* ada-exp.y (_initialize_ada_exp): Declare before definition.
	* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
	* target.h (struct target_ops): Add a prototype to the
	to_can_execute_reverse callback.
	* macroscope.c (_initialize_macroscope): Declare before definition.
	* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
	* python/python.c (_initialize_python): Declare before definition.
	* tui/tui-command.c: Include "tui/tui-command.h".
	* tui/tui-data.c (init_content_element, init_win_info): Make them
	static.
	* tui/tui-disasm.c: Include "tui/tui-disasm.h".
	* tui/tui-interp.c (_initialize_tui_interp): Declare before
	definition.
	* tui/tui-layout.c: Include "tui/tui-layout.h".
	(_initialize_tui_layout): Declare before definition.
	* tui/tui-regs.c: Include "tui/tui-regs.h".
	(tui_display_reg_element_at_line): Make it static.
	(_initialize_tui_regs): Declare before definition.
	* tui/tui-stack.c (_initialize_tui_stack): Declare before
	definition.
	* tui/tui-win.c: Include "tui/tui-win.h".
	(_initialize_tui_win): Declare before definition.
	(tui_sigwinch_handler): Make it static.  Wrap in ifdef SIGWINCH.
	* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
	(tui_get_cmd_list): Add a prototype.
	* tui/tui-windata.c: Include tui-windata.h.
	* tui/tui-wingeneral.c (box_win): Make it static.
	* cli/cli-logging.c (show_logging_command): Make it static.
	(_initialize_cli_logging): Declare before definition.
	* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
	definition.

2009-02-20  Pierre Muller  <[email protected]>

	Extend use of i386_use_watchpoints to all i386 native files
	using hardware watchpoints.
	* go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
	* i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
	* windows-nat.c (init_windows_ops): Ditto.
	* config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
	* config/i386/nm-cygwin64.h: Ditto.
	* config/i386/nm-fbsd.h: Ditto.
	* config/i386/nm-go32.h: Ditto.

2009-02-19  Joel Brobecker  <[email protected]>

	* ada-typeprint.c (ada_typedef_print): Remove.  Unused.

2009-02-18  Vladimir Prus  <[email protected]>

	* mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
	(mi_interpreter_init): Register the above.
	* solib.c (clear_solib): Notify solib unload.
	* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
	disable breakpoints on a.out targets.

2009-02-17  Vladimir Prus  <[email protected]>

	* observer.c (observer_test_first_notification_function)
	(observer_test_second_notification_function)
	(observer_test_third_notification_function): Adjust prototype.

2009-02-17  Pedro Alves  <[email protected]>

	* Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
	(ALL_TARGET_OBS): Add dicos-tdep.o.
	(ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
	* configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
	gdb_target_obs.
	(x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
	gdb_target_obs.
	* dicos-tdep.h, dicos-tdep.c: New.
	* amd64-dicos-tdep.c: New.
	* i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
	inferior.h.  Include dicos-tdep.h.
	(i386_dicos_init_abi): Call dicos_init_abi.
	(i386_dicos_bfd_has_symbol_p): Delete.
	(i386_dicos_osabi_sniffer): Use dicos_load_module_p.

	* NEWS: Mention x86-64 DICOS target support.

2009-02-16  Doug Evans  <[email protected]>

	* amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
	All callers updated.
	(amd64_get_insn_details): Handle more 3-byte opcode insns.
	(amd64_breakpoint_p): Delete.
	(amd64_displaced_step_fixup): When fixing up after stepping an int3,
	don't back up pc to the start of the int3.
	* i386-tdep.c: #include opcode/i386.h.
	(i386_skip_prefixes): New function.
	(i386_absolute_jmp_p): Constify argument.
	(i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
	(i386_breakpoint_p): Delete.
	(i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
	When fixing up after stepping an int3, don't back up pc to the start
	of the int3.

2009-02-16  Pedro Alves  <[email protected]>

	* corelow.c (core_close): Don't hardcode the core's pid.
	(core_open): Find core threads before calling
	post_create_inferior.
	(add_to_thread_list, get_core_register_section): Take into account
	systems where the regset section names encode the pid of the
	inferior.

	* gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
	* gdbarch.h, gdbarch.c: Regenerate.

	* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
	* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
	* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
	* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.

2009-02-14  Vladimir Prus  <[email protected]>

	Include frame information for *stopped due to CLI commands.

	* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
	* infcmd.c (finish_command_continuation): Pass '1' for
	'print_frame' parameter to the observer.
	* infrun.c (normal_stop): Don't print mi-specific information
	here. Pass 'stop_print_frame' to the 'print_frame' parameter
	of the observer.
	* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
	If we need to print frame, and current uiout is not the MI one,
	print frame again.

2009-02-13  Pierre Muller  <[email protected]>

	* xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
	Replace BSZ macro uses by XTENSA_ISA_BSZ macro.

2009-02-12  Jan Kratochvil  <[email protected]>

	PR fortran/9806
	* dwarf2read.c (process_die <DW_TAG_module>, read_module)
	(scan_partial_symbols <DW_TAG_module>, add_partial_module): New.

2009-02-11  Pierre Muller  <[email protected]>

	* dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
	for DW_ATE_signed_char and DW_ATE_unsigned_char
	for pascal language.

2009-02-11  Jim Meyering  <[email protected]>
	    Jan Kratochvil  <[email protected]>

	Avoid NULL dereference.
	* stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
	New variable func_type.

2009-02-11  Pedro Alves  <[email protected]>

	* gdbarch.c: Regenerate.

2009-02-10  Pierre Muller  <[email protected]>

	* p-lang.c (is_pascal_string_type): Fix comment.
	Determine exact size of char elements for GPC
	strings.
	(pascal_printstr): Handle char width of 2 or 4.
	* p-valprint.c (pascal_val_print): Handle char
	of width 2 or 4.

2009-02-07  Daniel Jacobowitz  <[email protected]>

	* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
	inside the loop.  Only call addrmap_set_empty if the compilation unit
	had DW_AT_high_pc and DW_AT_low_pc.  Update call to
	scan_partial_symbols.
	(scan_partial_symbols): Take NEED_PC argument and pass it along with
	LOWPC and HIGHPC.
	(add_partial_namespace): Take NEED_PC argument and pass it through.
	(add_partial_subprogram): Take NEED_PC argument.  Update the addrmap
	if necessary.

2009-02-07  Pedro Alves  <[email protected]>

	* NEWS: Mention inspecting extra signal information, $_siginfo,
	and the qXfer:siginfo:read and qXfer:siginfo:write packets.

2009-02-07  Pedro Alves  <[email protected]>

	* linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
	isn't defined.

2009-02-06  Pedro Alves  <[email protected]>

	* amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
	(compat_timer_t, compat_clock_t, struct compat_timeval)
	(compat_sigval_t, compat_siginfo_t): New types.
	(cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
	(cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
	(cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
	(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
	(amd64_linux_siginfo_fixup): New.
	* linux-nat.c (linux_nat_siginfo_fixup): New.
	(siginfo_fixup): New.
	(linux_xfer_siginfo): Use siginfo_fixup to convert between the
	siginfo layout expected by ptrace and the siginfo layout of the
	inferior.
	(linux_nat_set_siginfo_fixup): New.
	* linux-nat.h (linux_nat_set_siginfo_fixup): Declare.

2009-02-06  Pedro Alves  <[email protected]>

	* target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
	* infrun.c (siginfo_value_read, siginfo_value_write): New.
	(siginfo_value_funcs): New.
	(siginfo_make_value): New.
	(_initialize_infrun): Create the $_siginfo convenience variable.
	* gdbtypes.h (append_composite_type_field_aligned): Declare.
	* gdbtypes.c (append_composite_type_field): Rename to...
	(append_composite_type_field_aligned): ... this.  Add ALIGNMENT
	argument.  Handle it.
	(append_composite_type_field): Rewrite on top of
	append_composite_type_field_aligned.
	* value.h (internalvar_make_value): New typedef.
	(struct internalvar) <make_value>: New field.
	(create_internalvar_type_lazy): Declare.
	* value.c (create_internalvar): Clear make_value.
	(create_internalvar_type_lazy): New.
	(value_of_internalvar): If make_value is set use it.
	(preserve_values): Skip internal variables that don't have a
	value.
	* gdbarch.sh (get_siginfo_type): New.
	* gdbarch.h, gdbarch.c: Regenerate.

	* linux-tdep.h, linux-tdep.c: New.
	* amd64-linux-tdep.c: Include "linux-tdep.h".
	(amd64_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.
	* i386-linux-tdep.c: Include "linux-tdep.h".
	(i386_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.
	* arm-linux-tdep.c: Include "linux-tdep.h".
	(i386_linux_init_abi): Register linux_get_siginfo_type and
	linux_get_siginfo_mapper.

	* linux-nat.c (linux_xfer_siginfo): New.
	(linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
	* remote.c (PACKET_qXfer_siginfo_read)
	(PACKET_qXfer_siginfo_write): New.
	(feature remote_protocol_features): Add "qXfer:siginfo:read" and
	"qXfer:siginfo:write" features.
	(remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
	(_initialize_remote): Add "set/show remote read-siginfo-object"
	and "set/show remote write-siginfo-object" commands.

	* Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
	(HFILES_NO_SRCDIR): Add linux-tdep.h.
	(ALLDEPFILES): Add linux-tdep.c.

	* configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
	(i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
	gdb_target_obs.

2009-02-06  Jim Blandy  <[email protected]>
	    Daniel Jacobowitz  <[email protected]>
	    Vladimir Prus  <[email protected]>
	    Pedro Alves  <[email protected]>

	* defs.h (enum lval_type): New value: lval_computed.
	* value.h (struct lval_funcs): New type.
	(allocate_computed_value, value_computed_funcs)
	(value_computed_closure): New declarations.
	* value.c (struct value): Add a structure to the location union
	for computed lvalues, containing 'funcs' and 'closure' members.
	(allocate_computed_value, value_computed_funcs)
	(value_computed_closure): New functions.
	(value_free): For computed lvalues, call the closure's
	'free_closure' function before freeing the value itself.
	(value_copy): If we're copying an lval_computed value, call the
	closure's 'copy_closure' function.
	(set_value_component_location): If the original value is a
	computed lvalue, then call the closure's 'copy_closure' function.
	(value_of_internalvar): If an internal variable's value is a
	computed lvalue, make retrieving its value produce an equivalent
	computed lvalue.
	* valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
	their read function.
	(value_assign): Assign to computed lvalues by calling their write
	function.

2009-02-06  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_nat_wait): Adjust.
	(linux_nat_pid_to_str): Adjust.  Remove call to thread_db_init.
	* linux-nat.h (thread_db_init): Delete declaration.
	* linux-thread-db.c (target_beneath): Delete.
	(thread_db_init): Delete.
	(thread_db_detach): Use find_target_beneath.
	(thread_db_wait): Adjust interface.  Use find_target_beneath.
	(thread_db_mourn_inferior): Use find_target_beneath.
	(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
	(thread_db_async_mask): Delete.
	(thread_db_pid_to_str): Adjust interface.  Use
	find_target_beneath.
	(thread_db_get_thread_local_address): Adjust interface.  Use
	find_target_beneath.
	(init_thread_db_ops): Delete references to delete functions.
	* target.c (update_current_target): Don't inherit or default
	to_wait.  Don't inherit to_pid_to_str and
	to_get_thread_local_address.
	(target_translate_tls_address): Look for a pushed target that
	implements to_get_thread_local_address, and use it instead of
	checking for target_get_thread_local_address_p.
	(target_wait, target_pid_to_str): Reimplement as functions.
	(dummy_pid_to_str): New.
	(init_dummy_target): Register it.
	(debug_to_wait): Delete.
	* target.h (struct target_ops): Make to_wait, to_pid_to_str and
	to_get_thread_local_address accept a pointer to struct target_ops.
	(target_wait): Delete macro, and declare as function.
	(target_pid_to_str): Likewise.
	(target_get_thread_local_address)
	(target_get_thread_local_address_p): Delete.
	(noprocess): Add NORETURN and ATTR_NORETURN tags.
	* inf-ptrace.c (inf_ptrace_wait): Adjust.
	(inf_ptrace_pid_to_str): New.
	(inf_ptrace_target): Use inf_ptrace_pid_to_str.
	* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
	* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
	* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
	Adjust.
	* corelow.c (core_pid_to_str): Adjust.
	* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
	* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
	* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
	* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
	* hpux-thread.c (hpux_thread_wait): Adjust.
	* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
	* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
	* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
	* procfs.c (procfs_pid_to_str): Adjust.
	* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
	* remote-mips.c (mips_wait): Adjust.
	* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
	* remote.c (remote_wait, remote_pid_to_str)
	(remote_get_thread_local_address): Adjust.
	* rs6000-nat.c (rs6000_wait): Adjust.
	* sol-thread.c (procfs_pid_to_str): Adjust declaration.
	(sol_thread_wait, solaris_pid_to_str): Adjust.
	* spu-linux-nat.c (spu_child_wait): Adjust.
	* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.

2009-02-06  Tom Tromey  <[email protected]>

	* Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
	(SUBDIR_PYTHON_SRCS): Add python-cmd.c.
	(python-cmd.o): New target.
	* cli/cli-decode.c (set_cmd_completer): Add self parameter to
	completer prototype.
	(add_cmd): Initialize destroyer member of cmd_list_element. Use
	make_symbol_completion_list_fn as completer.
	(delete_cmd): Call destroyer if one is set.
	* cli/cli-decode.h (cmd_list_element): Add cmd parameter to
	completer member.  Add destroyer member.
	(set_cmd_completer): Add self parameter to
	completer prototype.
	* command.h (set_cmd_completer): Add cmd parameter to
	completer prototype.
	* completer.c (noop_completer, filename_completer,
	location_completer, expression_completer, command_completer): Adapt
	to new completer prototype.
	(complete_line_internal): Pass new parameter to completer function.
	* completer.h (noop_completer, filename_completer,
	location_completer, expression_completer, command_completer): Adapt
	prototypes to new completer prototype.
	* interps.c (interpreter_completer): Adapt to new completer
	prototype.
	* python/python-cmd.c: New file.
	* python/python-internal.h (gdbpy_initialize_commands): Add
	prototype.
	(gdbpy_doc_cst): Add forward declaration.
	* python/python.c (gdbpy_doc_cst): Declare.
	(_initialize_python): Call gdbpy_initialize_commands.  Initialize
	gdbpy_doc_cst.
	* symtab.c (make_symbol_completion_list_fn): New function.
	* symtab.h (make_symbol_completion_list_fn): Add prototype.

2009-02-06  Pedro Alves  <[email protected]>

	* target.c (target_get_osdata): Check for equal or higher than
	process_stratum, not dummy_stratum.

2009-02-06  Pedro Alves  <[email protected]>

	* remote.c (extended_remote_can_run): Delete.
	(init_remote_ops): Don't register it.
	* target.c (target_get_osdata): Don't check for target_can_run.
	Instead any target that has already been pushed, otherwise
	fallback to the default run target.

2009-02-06  Pedro Alves  <[email protected]>

	* target.c (target_create_inferior, target_detach)
	(target_mourn_inferior, target_attach, target_close): Do target
	debug output.
	(debug_to_attach, debug_to_detach, debug_to_create_inferior)
	(debug_to_mourn_inferior, debug_to_close): Delete.
	(setup_target_debug): Adjust.

2009-02-05  Pedro Alves  <[email protected]>

	* target.h (target_stopped_data_address_p): Delete declaration,
	and don't define as macro.
	* target.c (target_stopped_data_address_p): Delete.

2009-02-05  Thiago Jung Bauermann  <[email protected]>
	    Tom Tromey  <[email protected]>

	* python/python-utils.c (target_string_to_unicode): New function.
	* python/python-internal.h (target_string_to_unicode): New prototype.
	* python/python-value.c (valpy_string): New function.
	(value_object_methods): Add `string' entry.

2009-02-05  Pedro Alves  <[email protected]>

	* target.h (target_tid_to_str): Delete.
	* thread.c (print_thread_info, thread_apply_all_command)
	(thread_apply_command, thread_command, do_captured_thread_select):
	Use target_pid_to_str instead of target_tid_to_str.
	* linux-fork.c (delete_fork_command): Likewise.

2009-02-05  Pedro Alves  <[email protected]>

	* frame.c (has_stack_frames): Make public.
	(get_prev_frame): Don't allow a NULL this_frame anymore.
	* frame.h (has_stack_frames): Declare.
	* varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
	to get_prev_frame, instead start at get_current_frame.
	(varobj_create): Check has_stack_frames before getting any frame;
	eliminate one usage of deprecated_safe_get_selected_frame.

2009-02-05  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>

	* python/python.c (GdbMethods): Move to bottom of file.
	(get_parameter, execute_gdb_command, gdbpy_write,
	gdbpy_flush): Remove forward declarations.
	(eval_python_from_control_command): Fix error checking of function
	PyRun_SimpleString.  Fix error string.
	(python_command): Likewise.
	(execute_gdb_command): Added from_tty argument.

2009-02-05  Thiago Jung Bauermann  <[email protected]>

	* language.h (language_dfn): Add la_get_string member.
	(LA_GET_STRING): New macro.
	(default_get_string): New prototype.
	* language.c (default_get_string): New function.
	(unknown_language_defn, auto_language_defn, local_language_defn): Use
	default_get_string for la_get_string.
	* c-lang.c (c_get_string): New function.
	(c_language_defn, cplus_language_defn, asm_language_defn): Use
	c_get_string for la_get_string.
	(minimal_language_defn): Likewise
	* ada-lang.c (ada_language_defn): Likewise.
	* f-lang.c (f_language_defn): Use default_get_string for
	la_get_string.
	* jv-lang.c (java_language_defn): Likewise.
	* m2-lang.c (m2_language_defn): Likewise.
	* objc-lang.c (objc_language_defn): Likewise.
	* p-lang.c (p_language_defn): Likewise.
	* scm-lang.c (scm_language_defn): Likewise.
	* typeprint.c (type_to_string): New function.
	* value.h (type_to_string): New prototype.
	* valprint.c (val_print_string): Factor out code for reading string
	from the inferior into its own function.  Put 2 spaces after period
	in comments.
	(read_string): New function.
	* valprint.h (read_string): New prototype.

2009-01-07  Pierre Muller  <[email protected]>
	    Tom Tromey  <[email protected]>

	PR breakpoints/8079:
	* breakpoint.c (print_one_breakpoint): Use exp_string field
	to display expression of watchpoints.
	(mention): Likewise.
	(watch_command_1): Remove trailing whitespace from expression.
	* printcmd.c (struct display) <exp_string>: New field.
	(display_command): Set exp_string.
	(free_display): Free exp_string.
	(clear_displays): Use free_display.
	(do_one_display): Print exp_string.
	(display_info): Likewise.

2009-02-04  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>
	    Phil Muldoon  <[email protected]>

	* python/python-internal.h (gdbpy_get_value_from_history): Rename
	prototype to gdbpy_history.
	(gdbpy_is_string): Declare.
	(python_string_to_host_string): Declare.
	* python/python-utils.c (gdbpy_is_string): New function.
	(unicode_to_encoded_string): New function.
	(unicode_to_target_string): Use it.
	(python_string_to_host_string): New function.
	* python/python-value.c (valpy_address): New function.
	(convert_value_from_python): Use gdbpy_is_string.  Change to throw
	Python exception instead of a GDB exception on error.  Properly check
	Python booleans.
	(valpy_getitem): Convert field name to host string.  Handle array
	accesses.  Adapt to new behaviour of convert_value_from_python.
	(valpy_new): Adapt to new behaviour of convert_value_from_python.
	(enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
	VALPY_BITXOR, VALPY_BITOR>: New constants.
	(valpy_binop): Update.  Adapt to new behaviour of
	convert_value_from_python.
	(valpy_invert): New function.
	(valpy_lsh): Likewise.
	(valpy_rsh): Likewise.
	(valpy_and): Likewise.
	(valpy_or): Likewise.
	(valpy_xor): Likewise.
	(valpy_richcompare): Call convert_value_from_python instead of doing
	conversions itself.
	(is_intlike, valpy_int, valpy_long, valpy_float): New functions.
	(gdbpy_get_value_from_history): Rename
	function to gdbpy_history.
	(gdbpy_initialize_values): Don't set tp_new.
	(value_object_type): Add valpy_new.
	(value_object_methods): Add `address' entry.
	(value_object_as_number): Update for new methods.
	* python/python.c (GdbMethods): Rename entry from
	`get_value_from_history' to `history'.

2009-02-04  Jerome Guitton  <[email protected]>

	* ada-lang.c (ada_template_to_fixed_record_type_1): Check size
	of type to guard against a crash.

2009-02-04  Jerome Guitton  <[email protected]>

	* value.c (value_from_contents_and_address): Always return
	a lval_memory value, even if address is null.

2009-02-04  Tristan Gingold  <[email protected]>

	* i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
	(amd64_darwin_sigcontext_addr): Ditto.
	(darwin_dwarf_signal_frame_p): Ditto.
	(i386_darwin_init_abi): Handle signal frames, use the const for
	sc_num_regs.
	(x86_darwin_init_abi_64): Ditto.

2009-02-04  Tristan Gingold  <[email protected]>

	* i386-tdep.c (i386_sigtramp_p): Make it public.
	* i386-tdep.h (i386_sigtramp_p): Declare.

2009-02-04  Tristan Gingold  <[email protected]>

	* machoread.c (macho_symfile_read): Read minsymtab also from
	shared libraries.
	(macho_symfile_read): Try to read dwarf2 frame info from main
	object file, but not from OSO files.
	(macho_symfile_offsets): Update section names for latest BFD
	changes.
	* i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
	(x86_darwin_init_abi_64): Ditto.
	* solib-darwin.c: New file.
	* solib-darwin.h: New file.
	* configure.tgt: Add solib.o solib-darwin.o for Darwin.

2009-02-04  Tristan Gingold  <[email protected]>

	* solist.h (struct target_so_ops): Comment fallback behavior for
	operation same.

2009-02-03  Tom Tromey  <[email protected]>

	* completer.c (add_struct_fields): Check type_name against NULL
	before use.

2009-02-03  Joel Brobecker  <[email protected]>

	* MAINTAINERS: Update Elena's email address.

2009-02-02  Joel Brobecker  <[email protected]>

	* breakpoint (update_watchpoint): Minor comment adjustment.

2009-02-02  Tom Tromey  <[email protected]>

	PR gdb/9594:
	* completer.c (count_struct_fields): Count method names.
	(add_struct_fields): Add matching method names.

2009-02-02  Doug Evans  <[email protected]>

	* configure.ac (gdbkt): Check both no_tcl/no_tk first, before
	doing any further tcl/tk configury.  Don't configure gdbtk if
	tcl or tk check fails.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2009-02-02  Tom Tromey  <[email protected]>

	PR exp/9059:
	* valops.c (find_overload_match): Follow typedefs before taking
	address of object argument.

2009-02-01  Doug Evans  <[email protected]>

	* target.h (target_waitstatus_to_string): Declare.
	* target.c (target_waitstatus_to_string): New function.  Copied from
	debug_to_wait.  Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
	TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
	TARGET_WAITKIND_NO_HISTORY.
	(debug_to_wait): Call it.
	* infrun.c (wait_for_inferior): If debug_infrun, print result of
	target_wait.
	(fetch_inferior_event): Ditto.

2009-01-30  Tom Tromey  <[email protected]>

	* Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.

2009-01-30  Vladimir Prus  <[email protected]>

	PR 8145.
	* thread.c (do_captured_list_thread_ids): Report the current
	thread id.

2009-01-30  Vladimir Prus  <[email protected]>

	* breakpoint.c (create_breakpoint, create_breakpoints)
	(break_command_really, set_breakpoint): New parameter enabled.
	(create_breakpoint, break_command_really): Make breakpoint
	disabled if so requested.
	* breakpoint.h (set_breakpoint): New parameter enabled.
	* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.

2009-01-28  Doug Evans  <[email protected]>

	* amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
	(amd64_displaced_step_fixup): Declare.
	* amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
	(amd64_arch_regmap): Move out of amd64_analyze_stack_align
	and make static global.
	(amd64_arch_regmap_len): New static global.
	(amd64_arch_reg_to_regnum): New function.
	(struct amd64_insn): New struct.
	(struct displaced_step_closure): New struct.
	(onebyte_has_modrm,twobyte_has_modrm): New static globals.
	(rex_prefix_p,skip_prefixes)
	(amd64_insn_length_fprintf,amd64_insn_length_init_dis)
	(amd64_insn_length,amd64_get_unused_input_int_reg)
	(amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
	(amd64_displaced_step_copy_insn)
	(amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
	(amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
	(amd64_displaced_step_fixup): New functions.
	* amd64-linux-tdep.c: #include arch-utils.h.
	(amd64_linux_init_abi): Install displaced stepping support.

2009-01-28  Daniel Jacobowitz  <[email protected]>
	    Jerome Guitton  <[email protected]>

	* configure, config.in: Regenerated.
	* configure.ac: Add --with-system-gdbinit.
	* main.c (get_init_files): New.
	(captured_main): Use get_init_files.  Load system gdbinit before
	$HOME/.gdbinit.
	(print_gdb_help): Print location of init files.

2009-01-28  Pedro Alves  <[email protected]>

	* corefile.c (generic_search): Delete disabled code.
	* gdbcore.h (generic_search): Delete declaration.

2009-01-26  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
	parent to the child.
	* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
	* inf-ptrace.c (inf_ptrace_follow_fork): Likewise.  Use
	remove_breakpoints to remove breakpoints from the parent.

2009-01-26  Pedro Alves  <[email protected]>

	PR backtrace/9458, PR backtrace/8864:
	* frame.c (create_new_frame): Update the frame's cached PC before
	finding its unwinder.  Use frame_id_build to build the new frame's
	id.
	* stack.c (parse_frame_specification_1): Correct setting ``addrs''
	array values from the ``args'' array values.

2009-01-26  Pedro Alves  <[email protected]>

	* gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
	(create_array_type, create_set_type, init_flags_type)
	(copy_type_recursive): Replace pairs of calls to XALLOC and memset
	with a call to XZALLOC or XCALLOC, and pairs of calls to
	obstack_alloc and memset with a call to OBSTACK_ZALLOC.

2009-01-26  Pedro Alves  <[email protected]>

	Add "maint set|show internal-error|internal-warning quit|corefile
	ask|yes|no" commands.

	PR gdb/7580:
	* utils.c (internal_problem_ask, internal_problem_yes)
	(internal_problem_no, internal_problem_modes): New.
	(struct internal_problem): Remove FIXME.  Make should_quit and
	should_dump_core types to char *.
	(internal_vproblem, internal_error_problem)
	(internal_warning_problem): Adjust.
	(set_internal_problem_cmd, show_internal_problem_cmd): New dummy
	functions.
	(add_internal_problem_command): New.
	(_initialize_utils): New.

2009-01-25  Pedro Alves  <[email protected]>

	* infcmd.c (program_info): Use paddress instead of casting stop_pc
	to unsigned long.

2009-01-24  Pedro Alves  <[email protected]>

	* infrun.c (normal_stop): Don't call
	deprecated_update_frame_pc_hack.
	* frame.c (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete, and ...
	(create_new_frame): ... inline here.
	* frame.h (deprecated_update_frame_pc_hack)
	(deprecated_update_frame_base_hack): Delete declarations.

2009-01-23  Pedro Alves  <[email protected]>

	* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
	* cli/cli-setshow.c (do_setshow_command): Handle it.
	* command.h (enum var_types): Add var_zuinteger.
	(add_setshow_zuinteger_cmd): Declare.

	* valprint.c (_initialize_valprint): Change the set input-radix
	and set output-radix commands to zuinteger type.

2009-01-23  Pedro Alves  <[email protected]>

	PR gdb/9664:
	* infrun.c (normal_stop): Tag threads as stopped, and run the
	hook-stop before printing the stack frame.

2009-01-22  Pedro Alves  <[email protected]>

	PR c++/9631:
	* gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
	vbasetype.

2009-01-20  Kazu Hirata  <[email protected]>

	* gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
	unsigned long.

2009-01-20  Daniel Jacobowitz  <[email protected]>

	PR gdb/9346
	* infcmd.c (signal_command): Do not specify a resume PC.

2009-01-19  Doug Evans  <[email protected]>

	* dummy-frame.c (dummy_frame): Replace regcache member with
	caller_state.
	(dummy_frame_push): Replace caller_regcache arg with caller_state.
	All callers updated.
	(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
	(dummy_frame_pop): Rewrite.  Verify requested frame is in the
	dummy frame stack.  Restore program state.
	(cleanup_dummy_frames): Rewrite.
	(dummy_frame_sniffer): Update.  Make static.
	* dummy-frame.h (regcache,frame_info): Delete forward decls.
	(inferior_thread_state): New forward decl.
	(dummy_frame_push): Update prototype.
	* frame.c (frame_pop): dummy_frame_pop now does all the work for
	DUMMY_FRAMEs.
	* infcall.c (breakpoint_auto_delete_contents): Delete.
	(get_function_name,run_inferior_call): New fns.
	(call_function_by_hand): Simplify by moving some code to
	get_function_name, run_inferior_call.  Inferior function call wrapped
	in TRY_CATCH so there's less need for cleanups and all exits from
	proceed are handled similarily.  Detect program exit.
	Detect program stopping in a different thread.
	Make error messages more consistent.
	* inferior.h (inferior_thread_state): Declare (opaque type).
	(save_inferior_thread_state,restore_inferior_thread_state,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state, get_inferior_thread_state_regcache):
	Declare.
	(save_inferior_status): Update prototype.
	* infrun.c: (normal_stop): When stopped for the completion of an
	inferior function call, verify the expected stack frame kind.
	(inferior_thread_state): New struct.
	(save_inferior_thread_state,restore_inferior_thread_state,
	do_restore_inferior_thread_state_cleanup,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state,
	get_inferior_thread_state_regcache): New functions.
	(inferior_status): Move stop_signal, stop_pc, registers to
	inferior_thread_state.  Remove restore_stack_info.
	(save_inferior_status): Remove arg restore_stack_info.
	All callers updated.  Remove saving of state now saved by
	save_inferior_thread_state.
	(restore_inferior_status): Remove restoration of state now done by
	restore_inferior_thread_state.
	(discard_inferior_status): Remove freeing of registers, now done by
	discard_inferior_thread_state.

2009-01-18  Pedro Alves  <[email protected]>

	* tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
	at a time, times NUM_TO_SCROLL.
	* tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
	fetch the selected frame if there is no stack.

2009-01-18  Pedro Alves  <[email protected]>

	PR gdb/9747:
	* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
	Declare.
	* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
	* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
	is thrown while handling an event, finish the thread state.
	(normal_stop): Use finish_thread_state cleanup.
	* infcmd.c (run_command_1): If an error is thrown while starting
	the inferior, finish the thread state.

2009-01-18  Pedro Alves  <[email protected]>

	* tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
	skip breakpoints without a location (pending breakpoints).

2009-01-18  Pedro Alves  <[email protected]>

	PR build/9186:
	* hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.

2009-01-18  Nick Roberts  <[email protected]>

	* thread.c (thread_command): Move call to annotate_thread_changed
	to...
	(do_captured_thread_select): ... here, to avoid printing an
	annotation if the thread change generates an exception.

2009-01-16  Joel Brobecker  <[email protected]>

	* NEWS: Document x86_64/MinGW as a new native configuration.

2009-01-16  Joel Brobecker  <[email protected]>

	* NEWS: Move the documentation of "info os processes" to
	the appropriate section (documenting the new commands).

2009-01-15  Doug Evans  <[email protected]>

	* target.h (target_signal_to_string): Make return type const char *.
	(target_signal_to_name): Ditto.
	(target_signal_from_name): Make arg const char *.
	* infrun.c (sig_print_info): Update.
	* signals/signals.c (signals): Make array and struct members const.
	(target_signal_to_string): Make return type const char *.
	(target_signal_to_name): Ditto.
	(target_signal_from_name): Make arg const char *.

2009-01-15  Ulrich Weigand  <[email protected]>
	    Tristan Gingold  <[email protected]>

	* solist.h (struct target_so_ops): New member bfd_open.
	(solib_find): Add prototype.
	(solib_bfd_fopen): Add prototype.
	* solib.c (solib_find, solib_bfd_fopen): New functions, extracted
	from solib_bfd_open.
	(solib_bfd_open): Use ops->bfd_open override if present.  Call
	solib_find and solib_bfd_open otherwise.

	* objfiles.h (OBJF_KEEPBFD): New define.
	* objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
	objfile flag is set.
	* solib.c (symbol_add_stub): Do not allocate second BFD for
	shared library; use OBJF_KEEPBFD flag on solib objfile.

2009-01-15  Ulrich Weigand  <[email protected]>

	* frame.c (get_frame_arch): Abort if called with NULL this_frame.

2009-01-15  Ulrich Weigand  <[email protected]>

	* value.h (address_of_variable): Add prototype.
	(locate_var_value): Remove prototype.

	* findvar.c (read_var_value): Do not attempt to default frame
	to selected frame.
	(locate_var_value): Remove function.
	* valops.c (value_of_variable): Retrieve selected frame for
	symbols that require a frame when called with NULL block.
	* valops.c (address_of_variable): New function.

	* eval.c (evaluate_subexp_for_address): Call address_of_variable
	instead of calling locate_var_value.
	(evaluate_subexp_with_coercion): Likewise.

2009-01-14  Daniel Jacobowitz  <[email protected]>

	* NEWS: Document "define" for prefixed commands.
	* cli/cli-cmds.c (show_user): Update calls to show_user_1.  Call
	show_user_1 for prefix commands.
	* cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
	* cli/cli-script.c (validate_comname): Rewrite to handle prefix
	commands.  Return the containing command list.
	(define_command, document_command): Update to handle prefix commands.
	(show_user_1): Add prefix and name arguments.  Handle prefix
	commands.
	* cli/cli-script.h (show_user_1): Update prototype.

2009-01-14  Kai Tietz  <[email protected]>

	* ser-mingw.c (console_select_thread): Add return to make
	compiler happy.
	(pipe_select_thread): Likewise.
	(file_select_thread): Likewise.

2009-01-14  Pedro Alves  <[email protected]>

	* mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
	previous change.

2009-01-14  Pedro Alves  <[email protected]>

	* remote.c (extended_remote_mourn_1): Invalidate our notion of
	current general thread.

2009-01-14  Pedro Alves  <[email protected]>

	* mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
	without a live selected thread.

2009-01-14  Joel Brobecker  <[email protected]>

	Update the copyright notice of some of the files I missed
	in the previous copyright update.

2009-01-14  Joel Brobecker  <[email protected]>

	* windows-nat.c (handle_unload_dll): Use %p to print the DLL
	base address instead of casting it to DWORD.

2009-01-13  Ulrich Weigand  <[email protected]>

	* dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
	for NULL frame pointers.

2009-01-13  Mark Kettenis  <[email protected]>

	* utils.c (host_address_to_string): Reimplement in a way that
	avoids the cast of the address to long.

2009-01-13  Joel Brobecker  <[email protected]>

	* mdebugread.c (parse_symbol): Save the symbol private data
	using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
	(psymtab_to_symtab_1): Likewise.
	(parse_procedure): Declare variable "e" only in the scope
	where it is used. Extract the symbol private data using
	SYMBOL_VALUE_BYTES.

2009-01-13  Jim Blandy  <[email protected]>

	Abstract out common code for copying value locations.

	* value.h (set_value_component_location): New declaration.
	* value.c (set_value_component_location): New function.
	(value_primitive_field): Use it.
	* valarith.c (value_subscript, value_subscripted_rvalue): Same.
	* valops.c (search_struct_field, value_slice): Same.
	* ada-lang.c (coerce_unspec_val_to_type)
	(ada_value_primitive_packed_val): Same.

2009-01-13  Joel Brobecker  <[email protected]>

	* MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.

2009-01-12  Christopher Faylor  <[email protected]>

	* amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
	throughout.
	* i386-cygwin-tdep.c: Ditto.
	* i386-windows-nat.c: Ditto.
	* windows-nat.h: Ditto.
	* windows-tdep.c: Ditto.
	* windows-tdep.h: Ditto.
	* windows-nat.c: Ditto.
	(cygwin_load_start): Redefine as CORE_ADDR.
	(cygwin_load_end): Ditto.
	(windows_make_so): Coerce result of address arithmetic to uintptr_t
	before coercing to CORE_ADDR to avoid a compiler warning.
	(handle_exception): Define addr as CORE_ADDR and coerce
	ExceptionAddress to uintptr_t before assigining to avoid a compiler
	warning.
	* config/djgpp/fnchange.lst: Add mappings for recently renamed windows
	files.

2009-01-11  Jan Kratochvil  <[email protected]>

	Fix linking with --enable-targets=all:
	* Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
	(HFILES_NO_SRCDIR): Add windows-tdep.h.
	(ALLDEPFILES): Add windows-tdep.c.

2009-01-11  Chris Faylor  <[email protected]>

	* win32-nat.h: Delete.
	* windows-nat.h: Rename from win32-nat.h.
	* win32-nat.c: Delete.
	* windows-nat.c: Rename from win32-nat.c.
	* win32-termcap.c: Delete.
	* windows-termcap.c: Rename from win32-termcap.c.
	* amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
	* configure.ac: Handle rename from win32-termcap.c ->
	windows-termcap.c.
	* configure: Regenerate.
	* gdb_curses.h: Change comment to reflect rename from win32-termcap.c
	-> windows-termcap.c.
	* i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
	windows-tdep.h.
	* i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
	* windows-nat.c: Ditto.  Also reflect rename from from win32-tdep.h ->
	windows-tdep.h.
	(win32_make_so): Handle cygwin compiler warning due to change of
	load_addr from DWORD to LPVOID.
	(handle_load_dll): Use %p in format string to properly print address
	and avoid a compiler warning.
	(DEBUG_EXCEPTION_SIMPLE): Ditto.
	(handle_exception): Ditto.
	* windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
	* config/i386/cygwin.mh: Handle rename from win32-nat.o ->
	windows-nat.o.
	* config/i386/mingw.mh: Ditto.
	* config/i386/mingw64.mh: Ditto.

2009-01-11  Jan Kratochvil  <[email protected]>

	* f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
	arrayprint_recurse_level to a parameter.  Update all the callers.  New
	comment at autovariables.

2009-01-11  Jan Kratochvil  <[email protected]>

	* gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
	coding style.

2009-01-11  Joel Brobecker  <[email protected]>

	* target.c (target_xfer_partial): Use host_address_to_string to
	print the address of readbuf and writebuf. Cast the address of
	elements inside the myaddr buffer into intptr_t.
	(deprecated_debug_xfer_memory): Use paddress to print memaddr.
	Cast the address of elements inside the myaddr buffer into
	intptr_t.

2009-01-11  Joel Brobecker  <[email protected]>

	* amd64-windows-nat.c, amd64-windows-tdep.c: New files.
	* config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
	* configure.host, configure.tgt: Add handling for x86_64/windows.
	* config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
	and amd64-windows-tdep.c.

2009-01-11  Joel Brobecker  <[email protected]>

	* win32-tdep.h, win32-tdep.c: New files.
	* i386-cygwin-tdep.h: Delete.
	* i386-cygwin-tdep.c: Include win32-tdep.h instead of
	i386-cygwin-tdep.h.
	(win32_xfer_shared_library): Delete.  Moved to win32-tdep.c.
	* win32-nat.c: Likewise.
	* configure.tgt: Add win32-tdep.o to the list of target object
	files for i386-cygwin and i386-mingw targets.

2009-01-11  Joel Brobecker  <[email protected]>

	* win32-nat.h: New file.
	* win32-nat.c (mappings): Initialize to NULL.
	(win32_set_context_register_offsets): New function.
	* i386-windows-nat.c: New file.
	(mappings): Moved here from win32-nat.c.
	(_initialize_i386_windows_nat): New function.
	* config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
	* config/i386/cygwin.mh (NATDEPFILES): Likewise.

2009-01-09  Andreas Schwab  <[email protected]>

	* Makefile.in (init.c): Set LANG/LC_ALL to C, not c.

2009-01-09  Daniel Jacobowitz  <[email protected]>

	* gdbtypes.c (append_composite_type_field): Correct the location of
	appended fields.

2009-01-09  Pedro Alves  <[email protected]>

	* defs.h (deprecated_error_hook): Delete declaration.
	* interps.c (clear_interpreter_hooks): Adjust.
	* remote-sim.c (gdb_os_error): Don't try to call
	deprecated_error_hook.  No need to call exit anymore.
	* top.c (deprecated_error_hook): Delete.

2009-01-09  Joel Brobecker  <[email protected]>

	* arch-utils.c (gdbarch_update_p): Use host_address_to_string
	to print the address of the gdbarch pointer.

2009-01-09  Joel Brobecker  <[email protected]>

	* gdbarch.sh: Fix all the compilation errors on amd64-windows
	due to casting a pointer to a long when printing a function
	address. Instead, use host_address_to_string to convert our
	address to a string.
	* gdbarch.c: Regenerate.

2009-01-09  Joel Brobecker  <[email protected]>

	* event-top.c (async_disconnect, async_stop_sig): use "raise"
	instead of "kill" to raise a signal.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (get_module_name): Change the type of parameter
	"base_address" to LPVOID.  Remove unnecessary cast.
	(struct lm_info): Change type of load_addr to LPVOID.
	(win32_make_so): Change the type of parameter "load_addr"
	to LPVOID.  Remove some unnecessary casts.
	(handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
	(win32_xfer_shared_libraries): Add missing cast.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (has_detach_ability, set_process_privilege):
	Cast the result of GetProcAddress to (void *) to avoid
	a compilation warning.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
	already defined.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (get_image_name, win32_xfer_memory): Fix type
	definition of local variable "done".
	(info_w32_command, handle_exception): Remove unnecessary cast.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
	DebugSetProcessKillOnExit.  Update all uses in this file.
	(kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
	Update all uses in this file.

2009-01-09  Joel Brobecker  <[email protected]>

	* win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
	and use it when pushing the target.
	(win32_attach, win32_create_inferior): Update call to
	do_initial_win32_stuff.
	(win32_detach, win32_mourn_inferior): Use our ops parameter
	instead of the global win32_ops to unpush the target.

2009-01-09  Joel Brobecker  <[email protected]>

	* ser-mingw.c (ser_windows_open): Use proper type when casting
	in call to _open_osfhandle.

2009-01-09  Kai Tietz  <[email protected]>

	* coff-pe-read.c (read_pe_exported_syms): Fix typo.

2009-01-09  Joel Brobecker  <[email protected]>

	* CONTRIBUTE: Minor reformatting.

2009-01-08  Kai Tietz  <[email protected]>

	* MAINTAINERS: Add myself to Write After Approval.
	* coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
	export directory.

2009-01-08  Nathan Froyd  <[email protected]>

	* remote-sim.c (gdb_os_error): Mark as a noreturn function.
	Call exit to make it obvious to GCC.

2009-01-08  Tom Tromey  <[email protected]>

	PR breakpoints/9350:
	* varobj.c (varobj_invalidate): Unconditionally free
	all_rootvarobj.
	* symfile.c (syms_from_objfile): Free local_addr when returning
	normally.
	* exec.c (exec_file_attach): Do cleanups before returning.
	(exec_file_command): Likewise.
	* corefile.c (reopen_exec_file): Do cleanups before returning.
	* breakpoint.c (insert_breakpoint_locations): Do cleanups before
	returning.
	(do_vec_free): New function.
	(update_global_location_list): Make a cleanup for old_locations.
	Do cleanups before returning.  Remove unused variable 'e'.
	(find_condition_and_thread): Free result of parsing the
	expression.
	(print_it_typical): Do cleanups before returning.
	(breakpoint_re_set_one): Always free sals.sals.

2009-01-08  Joel Brobecker  <[email protected]>
	    Emi Suzuki  <[email protected]>

	* breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
	watchpoints.

2009-01-07  Doug Evans  <[email protected]>

	* top.c (gdb_prompt_string): Delete, unused.

2009-01-07  Pedro Alves  <[email protected]>

	Delete ONE_PROCESS_WRITETEXT leftovers.

	* breakpoint.c (insert_bp_location): Delete process_warning
	argument.  Adjust.
	(insert_breakpoint_locations): Adjust.
	(reattach_breakpoints): Adjust.
	* infrun.c (normal_stop): Drop "It might be running in another
	process" notice.

2009-01-07  Stan Shebs  <[email protected]>

	* config/pa/linux.mh (XDEPFILES): Remove.

2009-01-07  Doug Evans  <[email protected]>

	* cli/cli-cmds.c (set_debug): Fix cut-n-paste error.

2009-01-07  Jan Kratochvil  <[email protected]>

	* f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
	spacing, a regression from 2008-04-22.

2009-01-07  Joel Brobecker  <[email protected]>

	* utils.c (gdb_print_host_address): Adjust implementation to
	reuse host_address_to_string. Move comment explaining the conversion
	from host address to string from here...
	(host_address_to_string): ... to there.

2009-01-07  Emi Suzuki  <[email protected]>

	* MAINTAINERS: Add myself for write after approval privileges.

2009-01-06  Tom Tromey  <[email protected]>

	* value.c (set_internalvar): Use value_free, not xfree.

2009-01-06  Jim Blandy  <[email protected]>

	Check return values of functions declared with warn_unused_result
	attribute in GLIBC 2.8.
	* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
	* inflow.c (check_syscall): New function.
	(new_tty): Use check_syscall to check return values from open and dup.
	* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
	* main.c (captured_main): Call cwd after setting up gdb_stderr;
	check for errors from getcwd.
	* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
	* ui-file.c (stdio_file_write): Ignore return value from fwrite.
	(stdio_file_fputs): Same.
	* utils.c (internal_vproblem): abort if last-ditch error message
	write fails.

	* top.c (gdb_init): Don't set the current directory here; that's
	already been done in captured_main.

2009-01-06  Sandra Loosemore  <[email protected]>

	* ser-tcp.c: Adjust includes.
	(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
	(tcp_auto_retry, tcp_retry_limit): Declare.
	(TIMEOUT): Remove, in favor of tcp_retry_limit.
	(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
	(wait_for_connect): New function.
	(net_open): Use it.  Add auto-retry logic.
	(set_tcp_cmd, show_tcp_cmd): New functions.
	(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
	and "set/show tcp connect-timeout" commands.
	* NEWS: Document new commands.

2009-01-05  Tom Tromey  <[email protected]>

	* python/python-internal.h (Py_ssize_t): Define as int.

2009-01-05  Jim Blandy  <[email protected]>

	* MAINTAINERS: Fix my e-mail address as steering committee member.

2009-01-03  Joel Brobecker  <[email protected]>

	Updated copyright notices for most files.

2009-01-03  Joel Brobecker  <[email protected]>

	* top.c (print_gdb_version): Update copyright year.

2009-01-03  Joel Brobecker  <[email protected]>

	* config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.

2009-01-01  Pedro Alves  <[email protected]>

	PR breakpoints/9681:
	* exceptions.h (enum errors): New error type, MEMORY_ERROR.
	* corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
	* breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
	retrow all other exceptions.

For older changes see ChangeLog-2008.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: