[binutils.git] / gdb / doc / Makefile.in

##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.

# Makefile for GDB documentation.
# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

srcdir = @srcdir@
VPATH = @srcdir@

prefix = @prefix@

infodir = @infodir@
htmldir = $(prefix)/html

SHELL = @SHELL@

LN_S = @LN_S@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

# main GDB source directory
gdbdir = $(srcdir)/..

# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo

# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo

# Note that texinfo 4.0's makeinfo --html can only generate a
# single file, which would be too large, so continue to use
# texi2html. -sts 2000-03-28

MAKEHTML = texi2html
MAKEHTMLFLAGS = -glossary -menu -split_chapter

# where to find texi2roff, ditto
TEXI2ROFF=texi2roff

# Where is the source dir for the READLINE library doc?  
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc

# The GDB/MI docs come from a sibling directory ../mi
GDBMI_DIR = ${gdbdir}/mi

SET_TEXINPUTS = \
   TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS

# There may be alternate predefined collections of switches to configure
# the GDB manual.  Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all

# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
#    - Computer Modern (CM) fonts
#    - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
#  a4rc.sed     use A4 paper (297 x 210 mm)
#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
#      for A4, CM fonts:    REFEDITS = a4rc.sed
#      for US, PS fonts:    REFEDITS = psrc.sed
#      for default:
REFEDITS =

# Don Knuth's TeX formatter
TEX = tex

# auxiliary program for sorting Texinfo indices
TEXINDEX = texindex

# Program to generate Postscript files from DVI files.
DVIPS = dvips

# Program to generate PDF files from tex files.
PDFTEX = pdftex

# Main GDB manual's source files
SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/annotate.texi

SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)

SFILES_DOC = $(SFILES_LOCAL) $(GDBMI_DIR)/gdbmi.texinfo \
                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texinfo

#### Host, target, and site specific Makefile fragments come in here.
###

all install:

info: gdb.info gdbint.info stabs.info
dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
ps: gdb.ps gdbint.ps stabs.ps refcard.ps
html: gdb_toc.html gdbint_toc.html stabs_toc.html
pdf: gdb.pdf gdbint.pdf stabs.pdf
all-doc: info dvi ps # pdf
diststuff: info

install-info: info
	$(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
	for i in *.info* ; do \
		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
	done
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='gdb.info gdbint.info stabs.info'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
	    install-info --info-dir=$(infodir) $(infodir)/$$file || :;\
	  done; \
	else : ; fi

install-html: html
	for i in *.html ; do \
		$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
	done

STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf

# Copy the object files from a particular stage into a subdirectory.
stage1: force
	-mkdir stage1
	-mv $(STAGESTUFF) stage1

stage2: force
	-mkdir stage2
	-mv $(STAGESTUFF) stage2

stage3: force
	-mkdir stage3
	-mv $(STAGESTUFF) stage3

against=stage2

comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

de-stage1: force
	-(cd stage1 ; mv -f * ..)
	-rmdir stage1

de-stage2: force
	-(cd stage2 ; mv -f * ..)
	-rmdir stage2

de-stage3: force
	-(cd stage3 ; mv -f * ..)
	-rmdir stage3

# The "least clean" level of cleaning.  Get rid of files which are
# automatically generated files that are just intermediate files,
# 
mostlyclean:
	rm -f gdb.mm gdb.ms gdb.me links2roff
	rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
	rm -f sedref.dvi sedref.tex tmp.sed

clean: mostlyclean
	rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi

distclean: clean
	rm -f Makefile config.status

# GDBvn.texi, the dvi files, the info files, and the postscript files, 
# are all part of the distribution, so it should not be removed by
# "clean" or "distclean".  Use maintainer-clean to remove them.

maintainer-clean realclean: distclean
	rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf

# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
	if [ -z "$(REFEDITS)" ]; then \
		cp $(srcdir)/refcard.tex sedref.tex ; \
	else \
		echo > tmp.sed ; \
		for f in $(REFEDITS) ; do \
			cat $(srcdir)/$$f >>tmp.sed ; done ; \
		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	fi
	$(SET_TEXINPUTS) $(TEX) sedref.tex
	mv sedref.dvi refcard.dvi
	rm -f sedref.log sedref.tex tmp.sed

refcard.ps : refcard.dvi
	$(DVIPS) -t landscape -o $@ $?

# File to record current GDB version number (copied from main dir Makefile.in)
GDBvn.texi : ${gdbdir}/Makefile.in
	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
	mv GDBvn.new GDBvn.texi

# Updated atomically
.PRECIOUS: GDBvn.texi

# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	(test "$$LN_S" = "ln -s" && \
	  ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
#   source directory for the benefit of people who *don't* use this makefile,
#   VPATH will often tell make not to bother building it, because the one
#   in the srcdir is up to date.  (if not, then make should build one here).

# GDB MANUAL: TeX dvi file
gdb.dvi: ${SFILES_DOC}
	if [ ! -f ./GDBvn.texi ]; then \
		(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(TEXINDEX) gdb.??
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
		gdb.tp* gdb.vr*

gdb.ps: gdb.dvi
	$(DVIPS) -o $@ $?

gdb.pdf: ${SFILES_DOC}
	if [ ! -f ./GDBvn.texi ]; then \
		(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	$(TEXINDEX) gdb.??
	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
		gdb.tp* gdb.vr*

# GDB MANUAL: info file
# We're using texinfo 3.12; older makeinfo's may not be able to
# cope with all the markup.  
gdb.info: ${SFILES_DOC}
	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo

# GDB MANUAL: roff translations
# Try to use a recent texi2roff.  v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing 
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
#    corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate

# texi2roff doesn't have a notion of include dirs, so we have to fake 
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(SFILES_INCLUDED)
	if [ ! -f gdb.texinfo ]; then \
		(test "$$LN_S" = "ln -s" && ln -s $(SFILES_INCLUDED) .) || \
		ln $(SFILES_INCLUDED)    . || \
		cp $(SFILES_INCLUDED)    . ; \
	fi
	touch links2roff

#  "Readline" appendices.  Get them also due to lack of includes, 
# regardless of whether or not configuring in main sourcedir.
# @ftable removed due to bug in texi2roff-2; if your texi2roff
# is newer, try just ln or cp
rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
		sed -e 's/^@ftable/@table/g' \
		-e 's/^@end ftable/@end table/g' \
		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo

inc-hist.texinfo: ${READLINE_DIR}/inc-hist.texinfo
	(test "$$LN_S" = "ln -s" && \
	 ln -s ${READLINE_DIR}/inc-hist.texinfo .) || \
	ln ${READLINE_DIR}/inc-hist.texinfo . || \
	cp ${READLINE_DIR}/inc-hist.texinfo .

gdbmi.texinfo: ${GDBMI_DIR}/gdbmi.texinfo
	(test "$$LN_S" = "ln -s" && \
	 ln -s ${GDBMI_DIR}/gdbmi.texinfo .) || \
	ln ${GDBMI_DIR}/gdbmi.texinfo . || \
	cp ${GDBMI_DIR}/gdbmi.texinfo .

# gdb manual suitable for [gtn]roff -me
gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -me | \
	sed -e 's/---/\\(em/g' \
	>gdb.me 

# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -ms | \
	sed -e 's/---/\\(em/g' \
	>gdb.ms 

# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
#   try leaving them in
gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e '/@noindent/d' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -mm | \
	sed -e 's/---/\\(em/g' \
	>gdb.mm 

# GDB MANUAL: HTML file

gdb_toc.html: ${SFILES_DOC}
	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo

# GDB GUI MANUAL: TeX dvi file
gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	$(TEXINDEX) gdbgui.??
	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
		gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*

# GDB GUI MANUAL: info file
gdb-gui: gdbgui.info

gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
	$(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo

# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	$(TEXINDEX) gdbint.??
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*

gdbint.ps : gdbint.dvi
	$(DVIPS) -o $@ $?

gdbint.pdf: gdbint.dvi
	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
	$(TEXINDEX) gdbint.??
	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*

# GDB INTERNALS MANUAL: info file

gdbint.info: gdbint.texinfo
	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo

# GDB INTERNALS MANUAL: HTML file

gdbint_toc.html: gdbint.texinfo
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo

stabs.info: stabs.texinfo
	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo

# STABS DOCUMENTATION: HTML file

stabs_toc.html: stabs.texinfo
	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo

# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : stabs.texinfo
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	$(TEXINDEX) stabs.??
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*

stabs.ps: stabs.dvi
	$(DVIPS) -o $@ $?

stabs.pdf: stabs.dvi
	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
	$(TEXINDEX) stabs.??
	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*

force:

Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
	$(SHELL) ./config.status
Commit	Line	Data
c906108c SS	1	##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
	2
	3	# Makefile for GDB documentation.
	4	# This file is part of GDB.
	5
	6	# This program is free software; you can redistribute it and/or modify
	7	# it under the terms of the GNU General Public License as published by
	8	# the Free Software Foundation; either version 2 of the License, or
	9	# (at your option) any later version.
	10	#
	11	# This program is distributed in the hope that it will be useful,
	12	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	# GNU General Public License for more details.
	15	#
	16	# You should have received a copy of the GNU General Public License
	17	# along with this program; if not, write to the Free Software
	18	# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	19
	20	srcdir = @srcdir@
	21	VPATH = @srcdir@
	22
	23	prefix = @prefix@
	24
	25	infodir = @infodir@
085dd6e6	26	htmldir = $(prefix)/html
c906108c SS	27
	28	SHELL = @SHELL@
	29
39ec5655 EZ	30	LN_S = @LN_S@
39ec5655 EZ	31
c906108c SS	32	INSTALL = @INSTALL@
	33	INSTALL_PROGRAM = @INSTALL_PROGRAM@
	34	INSTALL_DATA = @INSTALL_DATA@
	35
	36	# main GDB source directory
	37	gdbdir = $(srcdir)/..
	38
	39	# where to find texinfo; GDB dist should include a recent one
	40	TEXIDIR=${gdbdir}/../texinfo
	41
	42	# where to find makeinfo, preferably one designed for texinfo-2
	43	MAKEINFO=makeinfo
	44
6d2ebf8b SS	45	# Note that texinfo 4.0's makeinfo --html can only generate a
	46	# single file, which would be too large, so continue to use
	47	# texi2html. -sts 2000-03-28
	48
085dd6e6 JM	49	MAKEHTML = texi2html
	50	MAKEHTMLFLAGS = -glossary -menu -split_chapter
	51
c906108c SS	52	# where to find texi2roff, ditto
	53	TEXI2ROFF=texi2roff
	54
	55	# Where is the source dir for the READLINE library doc?
	56	# Traditionally readline is in .. or .
	57	READLINE_DIR = ${gdbdir}/../readline/doc
	58
7162c0ca EZ	59	# The GDB/MI docs come from a sibling directory ../mi
	60	GDBMI_DIR = ${gdbdir}/mi
	61
	62	SET_TEXINPUTS = \
	63	TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
c906108c SS	64
	65	# There may be alternate predefined collections of switches to configure
	66	# the GDB manual. Normally this is not done in synch with the software
	67	# config system, since this choice tends to be independent; most people
	68	# want a doc config of `all' for a generic manual, regardless of sw config.
	69	DOC_CONFIG = all
	70
	71	# This list of sed edits will edit the GDB reference card
	72	# for what fonts and what papersize to use.
	73	# By default (NO edits applied), the refcard uses:
	74	# - Computer Modern (CM) fonts
	75	# - US letter paper (8.5x11in)
	76	# List some of the following files for alternative fonts and paper:
	77	# a4rc.sed use A4 paper (297 x 210 mm)
	78	# psrc.sed use PostScript fonts (Karl Berry short TeX names)
	79	# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
	80	# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
	81	# for A4, CM fonts: REFEDITS = a4rc.sed
	82	# for US, PS fonts: REFEDITS = psrc.sed
	83	# for default:
	84	REFEDITS =
	85
	86	# Don Knuth's TeX formatter
	87	TEX = tex
	88
	89	# auxiliary program for sorting Texinfo indices
	90	TEXINDEX = texindex
	91
	92	# Program to generate Postscript files from DVI files.
	93	DVIPS = dvips
	94
449f3b6c AC	95	# Program to generate PDF files from tex files.
	96	PDFTEX = pdftex
	97
c906108c	98	# Main GDB manual's source files
6d2ebf8b	99	SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/annotate.texi
c906108c SS	100
	101	SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
	102
7162c0ca	103	SFILES_DOC = $(SFILES_LOCAL) $(GDBMI_DIR)/gdbmi.texinfo \
7be570e7	104	$(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texinfo
c906108c SS	105
	106	#### Host, target, and site specific Makefile fragments come in here.
	107	###
	108
	109	all install:
	110
	111	info: gdb.info gdbint.info stabs.info
	112	dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
	113	ps: gdb.ps gdbint.ps stabs.ps refcard.ps
085dd6e6	114	html: gdb_toc.html gdbint_toc.html stabs_toc.html
449f3b6c AC	115	pdf: gdb.pdf gdbint.pdf stabs.pdf
449f3b6c AC	116	all-doc: info dvi ps # pdf
3555de01	117	diststuff: info
c906108c SS	118
c906108c SS	119	install-info: info
9ef47d30	120	$(SHELL) $(srcdir)/../../mkinstalldirs $(infodir)
c906108c SS	121	for i in .info ; do \
	122	$(INSTALL_DATA) $$i $(infodir)/$$i ; \
	123	done
d3229ae3 EZ	124	@if $(SHELL) -c 'install-info --version \| sed 1q \| fgrep -s -v -i debian' >/dev/null 2>&1; then \
	125	list='gdb.info gdbint.info stabs.info'; \
	126	for file in $$list; do \
	127	echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\
	128	install-info --info-dir=$(infodir) $(infodir)/$$file \|\| :;\
	129	done; \
	130	else : ; fi
c906108c	131
085dd6e6 JM	132	install-html: html
	133	for i in *.html ; do \
	134	$(INSTALL_DATA) $$i $(htmldir)/$$i ; \
	135	done
	136
449f3b6c	137	STAGESTUFF = .info gdb-all.texi GDBvn.texi .ps .dvi *.pdf
c906108c SS	138
	139	# Copy the object files from a particular stage into a subdirectory.
	140	stage1: force
	141	-mkdir stage1
	142	-mv $(STAGESTUFF) stage1
	143
	144	stage2: force
	145	-mkdir stage2
	146	-mv $(STAGESTUFF) stage2
	147
	148	stage3: force
	149	-mkdir stage3
	150	-mv $(STAGESTUFF) stage3
	151
	152	against=stage2
	153
	154	comparison: force
	155	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
	156
	157	de-stage1: force
	158	-(cd stage1 ; mv -f * ..)
	159	-rmdir stage1
	160
	161	de-stage2: force
	162	-(cd stage2 ; mv -f * ..)
	163	-rmdir stage2
	164
	165	de-stage3: force
	166	-(cd stage3 ; mv -f * ..)
	167	-rmdir stage3
	168
	169	# The "least clean" level of cleaning. Get rid of files which are
	170	# automatically generated files that are just intermediate files,
	171	#
	172	mostlyclean:
	173	rm -f gdb.mm gdb.ms gdb.me links2roff
	174	rm -f .aux .cp* .fn .ky .log .pg* .toc .tp* .vr
	175	rm -f sedref.dvi sedref.tex tmp.sed
	176
	177	clean: mostlyclean
7be570e7	178	rm -f rluser.texinfo inc-hist.texinfo gdb-cfg.texi
c906108c SS	179
	180	distclean: clean
	181	rm -f Makefile config.status
	182
	183	# GDBvn.texi, the dvi files, the info files, and the postscript files,
	184	# are all part of the distribution, so it should not be removed by
	185	# "clean" or "distclean". Use maintainer-clean to remove them.
	186
	187	maintainer-clean realclean: distclean
449f3b6c	188	rm -f GDBvn.texi .info .dvi .ps .html .pdf
c906108c SS	189
	190	# GDB QUICK REFERENCE (dvi output)
	191	refcard.dvi : refcard.tex $(REFEDITS)
	192	if [ -z "$(REFEDITS)" ]; then \
	193	cp $(srcdir)/refcard.tex sedref.tex ; \
	194	else \
	195	echo > tmp.sed ; \
c741b251	196	for f in $(REFEDITS) ; do \
c906108c SS	197	cat $(srcdir)/$$f >>tmp.sed ; done ; \
	198	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	199	fi
	200	$(SET_TEXINPUTS) $(TEX) sedref.tex
	201	mv sedref.dvi refcard.dvi
	202	rm -f sedref.log sedref.tex tmp.sed
	203
	204	refcard.ps : refcard.dvi
	205	$(DVIPS) -t landscape -o $@ $?
	206
	207	# File to record current GDB version number (copied from main dir Makefile.in)
	208	GDBvn.texi : ${gdbdir}/Makefile.in
	209	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION = //p'`" > ./GDBvn.new
	210	mv GDBvn.new GDBvn.texi
	211
	212	# Updated atomically
	213	.PRECIOUS: GDBvn.texi
	214
	215	# Choose configuration for GDB manual (normally `all'; normally not tied into
	216	# `configure' script because most users prefer generic version of manual,
	217	# not one for their binary config---which may not be specifically
	218	# defined anyways).
	219	gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
39ec5655 EZ	220	(test "$$LN_S" = "ln -s" && \
39ec5655 EZ	221	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) \|\| \
c906108c SS	222	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	223	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
	224
	225	# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
	226	# If your texinfo or makeinfo don't support these, get a new texinfo release
	227	#
	228	# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
	229	# Note that we can generate GDBvn.texi, but since we distribute one in the
	230	# source directory for the benefit of people who don't use this makefile,
	231	# VPATH will often tell make not to bother building it, because the one
	232	# in the srcdir is up to date. (if not, then make should build one here).
	233
	234	# GDB MANUAL: TeX dvi file
	235	gdb.dvi: ${SFILES_DOC}
	236	if [ ! -f ./GDBvn.texi ]; then \
39ec5655	237	(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
c906108c SS	238	ln $(srcdir)/GDBvn.texi . \|\| \
	239	cp $(srcdir)/GDBvn.texi . ; else true; fi
	240	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	241	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	242	$(TEXINDEX) gdb.??
	243	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	244	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
	245	gdb.tp* gdb.vr*
	246
	247	gdb.ps: gdb.dvi
	248	$(DVIPS) -o $@ $?
	249
449f3b6c AC	250	gdb.pdf: ${SFILES_DOC}
	251	if [ ! -f ./GDBvn.texi ]; then \
	252	(test "$$LN_S" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) \|\| \
	253	ln $(srcdir)/GDBvn.texi . \|\| \
	254	cp $(srcdir)/GDBvn.texi . ; else true; fi
	255	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	256	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	257	$(TEXINDEX) gdb.??
	258	$(SET_TEXINPUTS) $(PDFTEX) gdb.texinfo
	259	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
	260	gdb.tp* gdb.vr*
	261
c906108c	262	# GDB MANUAL: info file
7162c0ca	263	# We're using texinfo 3.12; older makeinfo's may not be able to
c906108c SS	264	# cope with all the markup.
c906108c SS	265	gdb.info: ${SFILES_DOC}
7162c0ca	266	$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
c906108c SS	267
	268	# GDB MANUAL: roff translations
	269	# Try to use a recent texi2roff. v2 was put on prep in jan91.
	270	# If you want an index, see texi2roff doc for postprocessing
	271	# and add -i to texi2roff invocations below.
	272	# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
	273	# corresponding -e lines when later texi2roff's are current)
	274	# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
	275	# + @c's deleted explicitly because texi2roff sees texinfo commands in them
	276	# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
	277	# + @alphaenumerate is ridiculously new, turned into @enumerate
	278
	279	# texi2roff doesn't have a notion of include dirs, so we have to fake
	280	# it out for gdb manual's include files---but only if not configured
	281	# in main sourcedir.
	282	links2roff: $(SFILES_INCLUDED)
	283	if [ ! -f gdb.texinfo ]; then \
39ec5655	284	(test "$$LN_S" = "ln -s" && ln -s $(SFILES_INCLUDED) .) \|\| \
c906108c SS	285	ln $(SFILES_INCLUDED) . \|\| \
	286	cp $(SFILES_INCLUDED) . ; \
	287	fi
	288	touch links2roff
	289
	290	# "Readline" appendices. Get them also due to lack of includes,
	291	# regardless of whether or not configuring in main sourcedir.
	292	# @ftable removed due to bug in texi2roff-2; if your texi2roff
	293	# is newer, try just ln or cp
	294	rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
	295	sed -e 's/^@ftable/@table/g' \
	296	-e 's/^@end ftable/@end table/g' \
	297	${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
	298
7be570e7	299	inc-hist.texinfo: ${READLINE_DIR}/inc-hist.texinfo
39ec5655 EZ	300	(test "$$LN_S" = "ln -s" && \
39ec5655 EZ	301	ln -s ${READLINE_DIR}/inc-hist.texinfo .) \|\| \
7be570e7 JM	302	ln ${READLINE_DIR}/inc-hist.texinfo . \|\| \
7be570e7 JM	303	cp ${READLINE_DIR}/inc-hist.texinfo .
c906108c	304
7162c0ca EZ	305	gdbmi.texinfo: ${GDBMI_DIR}/gdbmi.texinfo
	306	(test "$$LN_S" = "ln -s" && \
	307	ln -s ${GDBMI_DIR}/gdbmi.texinfo .) \|\| \
	308	ln ${GDBMI_DIR}/gdbmi.texinfo . \|\| \
	309	cp ${GDBMI_DIR}/gdbmi.texinfo .
	310
c906108c	311	# gdb manual suitable for [gtn]roff -me
7162c0ca	312	gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
c906108c SS	313	sed -e '/\\input texinfo/d' \
	314	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	315	-e '/^@ifinfo/,/^@end ifinfo/d' \
	316	-e '/^@c /d' \
	317	-e 's/{.*,,/{/' \
	318	-e 's/@ / /g' \
	319	-e 's/^@alphaenumerate/@enumerate/g' \
	320	-e 's/^@end alphaenumerate/@end enumerate/g' \
	321	$(srcdir)/gdb.texinfo \| \
	322	$(TEXI2ROFF) -me \| \
	323	sed -e 's/---/\\(em/g' \
	324	>gdb.me
	325
	326	# gdb manual suitable for [gtn]roff -ms
7162c0ca	327	gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
c906108c SS	328	sed -e '/\\input texinfo/d' \
	329	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	330	-e '/^@ifinfo/,/^@end ifinfo/d' \
	331	-e '/^@c /d' \
	332	-e 's/{.*,,/{/' \
	333	-e 's/@ / /g' \
	334	-e 's/^@alphaenumerate/@enumerate/g' \
	335	-e 's/^@end alphaenumerate/@end enumerate/g' \
	336	$(srcdir)/gdb.texinfo \| \
	337	$(TEXI2ROFF) -ms \| \
	338	sed -e 's/---/\\(em/g' \
	339	>gdb.ms
	340
	341	# gdb manual suitable for [tn]roff -mm
	342	# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
	343	# try leaving them in
7162c0ca	344	gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texinfo gdbmi.texinfo
c906108c SS	345	sed -e '/\\input texinfo/d' \
	346	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	347	-e '/^@ifinfo/,/^@end ifinfo/d' \
	348	-e '/^@c /d' \
	349	-e 's/{.*,,/{/' \
	350	-e '/@noindent/d' \
	351	-e 's/@ / /g' \
	352	-e 's/^@alphaenumerate/@enumerate/g' \
	353	-e 's/^@end alphaenumerate/@end enumerate/g' \
	354	$(srcdir)/gdb.texinfo \| \
	355	$(TEXI2ROFF) -mm \| \
	356	sed -e 's/---/\\(em/g' \
	357	>gdb.mm
	358
085dd6e6 JM	359	# GDB MANUAL: HTML file
	360
	361	gdb_toc.html: ${SFILES_DOC}
7162c0ca	362	$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
085dd6e6	363
3fc11d3e JM	364	# GDB GUI MANUAL: TeX dvi file
	365	gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
	366	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	367	$(TEXINDEX) gdbgui.??
	368	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
	369	rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
	370	gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*
	371
	372	# GDB GUI MANUAL: info file
	373	gdb-gui: gdbgui.info
	374
	375	gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
	376	$(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
c906108c SS	377
	378	# GDB INTERNALS MANUAL: TeX dvi file
	379	gdbint.dvi : gdbint.texinfo
	380	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	381	$(TEXINDEX) gdbint.??
	382	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	383	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
	384	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
	385
	386	gdbint.ps : gdbint.dvi
	387	$(DVIPS) -o $@ $?
	388
449f3b6c AC	389	gdbint.pdf: gdbint.dvi
	390	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
	391	$(TEXINDEX) gdbint.??
	392	$(SET_TEXINPUTS) $(PDFTEX) gdbint.texinfo
	393	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
	394	gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
	395
c906108c SS	396	# GDB INTERNALS MANUAL: info file
	397
	398	gdbint.info: gdbint.texinfo
	399	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
	400
085dd6e6 JM	401	# GDB INTERNALS MANUAL: HTML file
	402
	403	gdbint_toc.html: gdbint.texinfo
	404	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
	405
c906108c SS	406	stabs.info: stabs.texinfo
	407	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
	408
085dd6e6 JM	409	# STABS DOCUMENTATION: HTML file
	410
	411	stabs_toc.html: stabs.texinfo
	412	$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
	413
c906108c SS	414	# STABS DOCUMENTATION: TeX dvi file
	415	stabs.dvi : stabs.texinfo
	416	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	417	$(TEXINDEX) stabs.??
	418	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	419	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
	420	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
	421
	422	stabs.ps: stabs.dvi
	423	$(DVIPS) -o $@ $?
	424
449f3b6c AC	425	stabs.pdf: stabs.dvi
	426	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
	427	$(TEXINDEX) stabs.??
	428	$(SET_TEXINPUTS) $(PDFTEX) stabs.texinfo
	429	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
	430	stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
	431
c906108c SS	432	force:
	433
	434	Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
	435	$(SHELL) ./config.status