* as.c (show_usage): Document "@FILE".

[binutils.git] / gas / ChangeLog

2005-10-30  Mark Mitchell  <[email protected]>

	* as.c (show_usage): Document "@FILE".

2005-10-30  H.J. Lu  <[email protected]>

	* Makefile.am (OBJ_FORMATS): Remove vms.
	Run "make dep-am".
	* Makefile.in: Regenerated.

	* dep-in.sed: Replace " ./" with " ".

2005-10-28  Dave Brolley  <[email protected]>

	Contribute the following change:
	2005-09-19  Dave Brolley  <[email protected]>

	* config/tc-m32c.c (default_isa): New static variable.
	(m32c_isa): Now of type CGEN_BITSET.
	(md_begin): Pass &m32c_isa to m32c_cgen_cpu_open.

2005-10-28  Paul Brook  <[email protected]>

	* config/tc-arm.c (aeabi_set_public_attributes): Use selected_cpu
	instead of mcpu_cpu_opt.

2005-10-27  Sterling Augustine  <[email protected]>

	* config/tc-xtensa.c (find_vinsn_conflicts): Change error messages to
	refer to "ports" instead of "queues".
	(check_t1_t2_reads_and_writes): Pass correct interface values to
	xtensa_interface_inout.

2005-10-27  Jan Beulich  <[email protected]>

	* read.c (assign_symbol): Also consider equates already defined.
	* symbols.c (symbol_clone): Also clone the underlying BFD symbol.
	* config/obj-coff.h (obj_symbol_clone_hook): New.
	(coff_obj_symbol_clone_hook): Declare.
	* config/obj-coff.c (coff_obj_symbol_clone_hook): New.

2005-10-26  DJ Delorie  <[email protected]>

	* config/tc-m32c.c (md_relax_table, subtype_mappings,
	md_convert_frag): Add jsr.w support.
	
	* config/tc-m32c.c (md_assemble): Don't use errmsg as the format
	itself.
	(md_cgen_lookup_reloc): Add m32c bitbase operands.  Add 8-s24
	and imm-8-HI operands.

2005-10-26  Paul Brook  <[email protected]>

	* config/tc-arm.c (insns): Correct "sel" entry.

2005-10-26  Jan Beulich  <[email protected]>

	* config/tc-i386.c (i386_operand): Don't check register prefix here.
	(parse_real_register): Rename from parse_register.
	(parse_register): New.
	(i386_parse_name): New.
	(md_operand): New.
	(intel_e11): Don't tolerate registers in offset expressions anymore.
	(intel_get_token): Don't check register prefix here. Copy the actual
	register token, not the canonical register name.
	* config/tc-i386.h (md_operand): Delete.
	(i386_parse_name): Declare.
	(md_parse_name): Define.

2005-10-25  Arnold Metselaar  <[email protected]>

	* Makefile.am: Add Z80 cpu.
	* Makefile.in: Regenerated.
	* app.c (do_scrub_chars)<TC_Z80>: Correctly scrub "ex af,af'" 
	and disallow newlines in quoted strings.
	* configure.tgt: Add z80-*-coff.
	* config/obj-coff.h: Add format "coff-z80".
	* doc/Makefile.am: Add c-z80.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Add Z80.
	* doc/c-z80.texi: New file
	* doc/as.texinfo: Add z80 options and some z80-related remarks.
	* config/tc-z80.c: New file
	* config/tc-z80.h: New file
	* NEWS: Mention new support.

2005-10-25  H.J. Lu  <[email protected]>

	* write.c (adjust_reloc_syms): Undo the change made on
	2005-04-26 to allow local symbol set to undefined symbol.

2005-10-24  H.J. Lu  <[email protected]>

	* Makefile.am (bfin-parse.tab.h): Removed.
	(bfin-parse.h): Added.
	* Makefile.in: Regenerated.

2005-10-25  Alan Modra  <[email protected]>

	* po/POTFILES.in: Regenerate.
	* po/gas.pot: Regenerate.

2005-10-24  Bernd Schmidt  <[email protected]>

	* config/tc-bfin.c (Expr_Node_Gen_Reloc): If have symbol + constant,
	make a single reloc with an offset rather than a stack.
	* config/tc-bfin.h (MD_APPLY_SYM_VALUE): Define to 0.

2005-10-24  Alexandre Oliva  <[email protected]>

	* read.c (potable): Add weakref.
	(s_weakref): New.
	* read.h (s_weakref): Declare.
	* struc-symbol.h (struct symbol): Add sy_weakrefr and sy_weakrefd.
	* symbols.c (colon): Clear weakrefr.
	(symbol_find_exact): Rename to, and reimplement in terms of...
	(symbol_find_exact_noref): ... new function.
	(symbol_find): Likewise...
	(symbol_find_noref): ... ditto.
	(resolve_symbol_value): Resolve weakrefr without setting their
	values.
	(S_SET_WEAK): Call hook.
	(S_GET_VALUE): Follow weakref link.
	(S_SET_VALUE): Clear weakrefr.
	(S_IS_WEAK): Follow weakref link.
	(S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): New.
	(S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): New.
	(symbol_set_value_expression, symbol_set_frag): Clear weakrefr.
	(symbol_mark_used): Follow weakref link.
	(print_symbol_value_1): Print weak, weakrefr and weakrefd.
	* symbols.h (symbol_find_noref, symbol_find_exact_noref): Declare.
	(S_IS_WEAKREFR, S_SET_WEAKREFR, S_CLEAR_WEAKREFR): Declare.
	(S_IS_WEAKREFD, S_SET_WEAKREFD, S_CLEAR_WEAKREFD): Declare.
	* write.c (adust_reloc_syms): Follow weakref link.  Do not
	complain if target is undefined.
	(write_object_file): Likewise.  Remove weakrefr symbols.  Drop
	unreferenced weakrefd symbols.
	* config/obj-coff.c (obj_frob_symbol): Do not force WEAKREFD
	symbols EXTERNAL.
	(pecoff_obj_set_weak_hook, pecoff_obj_clear_weak_hook): New.
	* config/obj-coff.h (obj_set_weak_hook, obj_clear_weak_hook): Define.
	* doc/as.texinfo: Document weakref.
	* doc/internals.texi: Document new struct members, internal
	functions and hooks.

2005-10-24  Jie Zhang  <[email protected]>

	* Makefile.am (bfin-parse.h): Renamed from bfin-parse.tab.h.
	(EXTRA_DIST): Add bfin-parse.h and bfin-lex.c.
	* Makefile.in: Regenerate.
	* config/bfin-lex.l: Include bfin-parse.h instead of bfin-parse.tab.h.
	* config/tc-bfin.c (md_chars_to_number): Change the type of first
	argument from unsigned char * to char * to remove signedness warnings.

2005-10-24  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (enum reg_symbol): Delete IND_MEM.
	(dot_rot): Change type of num_* variables. Check for positive count.
	(ia64_optimize_expr): Re-structure.
	(md_operand): Check for general register.

2005-10-24  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (declare_register): Call symbol_create.
	(md_begin): Remove local variables total, ar_base, and cr_base.
	Start loops for registers at their respective first one. Don't
	update md.regsym for alias names. Generate alias name tp for r13.

2005-10-21  DJ Delorie  <[email protected]>

	* config/tc-m32c.c (md_cgen_lookup_reloc): Add more relocs.  Print
	names unstead of numbers.

2005-10-19  David Ung  <[email protected]>

	* config/tc-mips.c (append_insn): Convert MIPS16 jr/jalr jumps
	into jrc/jalrc versions if ISA_MIPS32+ and not doing the swap,
	hence avoiding to emit a nop.

2005-10-19  Jie Zhang  <[email protected]>

	* config/tc-bfin.c (md_begin): Let the lex_type of '(' be
	LEX_BEGIN_NAME.
	(bfin_start_line_hook): Remove the workaround for LSETUP(.
	(bfin_name_is_register): Remove the workarounds for LSETUP(
	and SAA(.
	(bfin_start_label): Ditto.

2005-10-18  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_end_directive): Restore
	default_lit_sections regardless of use_literal_section.

2005-10-18  Jie Zhang  <[email protected]>

	* Makefile.am (bfin-lex.c): Update ylwrap invocation.
	* Makefile.in: Regenerated.

2005-10-18  Arnold Metselaar  <[email protected]>

	* doc/as.texinfo (.loc) Fix placement of '@end table'.

2005-10-17  Bob Wilson  <[email protected]>

	* config/xtensa-istack.h (TInsn): Replace dwarf2_line_info with an
	unsigned line number.  Do not include "dwarf2dbg.h".
	* config/tc-xtensa.c (md_pseudo_table): Remove entry for "loc".
	(xtensa_dwarf2_directive_loc, xtensa_dwarf2_emit_insn): Delete.
	(xg_build_to_insn, xg_build_token_insn): Update TInsn uses.
	(md_assemble): Use as_where instead of dwarf2_where.
	(xg_assemble_vliw_tokens): Use unsigned line numbers instead of
	dwarf2_line_infos.  Change to call new_logical_line followed by
	dwarf2_emit_insn.

2005-10-14  Mike Frysinger <[email protected]>

	* doc/as.texinfo (Section): Add missing ']' to .section example.

2005-10-12  John David Anglin  <[email protected]>

	PR binutils/941
	* config/tc-hppa.c (pa_ip): Use as_bad instead of as_fatal when an
	unknown opcode is found.

2005-10-12  Mark Mitchell  <[email protected]>

	* NEWS: Mention @file.

2005-10-12  Nick Clifton  <[email protected]>

	* config/tc-avr.c: Convert to ISO C90 format.  Fix formatting and
	generally tidy up the code.
	* config/tc-avr.h: Likewise.

2005-10-12  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_reg_val): Use expression_and_evaluate.
	(dot_pred_rel): Likewise.
	(parse_operand): Likewise.
	(ia64_unrecognized_line): Likewise.
	(md_operand): Likewise.

2005-10-11  Jan Beulich  <[email protected]>

	* expr.h (enum expr_mode): New.
	(expression): Pass third argument to expr.
	(expression_and_evaluate): New.
	(deferred_expression): New.
	(expr): Add third parameter.
	(resolve_expression): New.
	* struc-symbol.h (struct symbol): New members sy_volatile and
	sy_forward_ref.
	* symbols.c, symbols.h (symbol_clone): New.
	(symbol_clone_if_forward_ref): New.
	(snapshot_symbol): New.
	(S_IS_VOLATILE): New.
	(S_IS_FORWARD_REF): New.
	(S_SET_VOLATILE): New.
	(S_SET_FORWARD_REF): New.
	* as.c (macro_expr): Use expression_and_evaluate.
	* cond.c (s_if): Likewise.
	(s_elseif): Likewise.
	* dw2gencfi.c (cfi_parse_reg): Likewise.
	* expr.c (operand): Add second parameter. Optionally call
	deferred_expression. Pass mode argument to itself and md_parse_name.
	Check mode before trying to evaluate symbol. Call
	symbol_clone_if_forward_ref for both operands.
	(expr): Add third parameter. Pass mode to operand and itself.
	Optionally call resolve_expression.
	(resolve_expression): New.
	(get_single_number): Pass second argument to operand.
	* read.c (potable): New entry for .eqv.
	(read_a_source_file): Handle new == operator.
	(get_absolute_expr): Use expression_and_evaluate.
	(s_lsym): Likewise.
	(assign_symbol): Rename second parameter. Call symbol_clone on
	legal and illegal redefinition. Call S_SET_VOLATILE and
	S_SET_FORWARD_REF depending on mode.
	(s_set): Update description.
	(s_space): Call resolve_expression.
	(pseudo_set): Optionally call deferred_expression. Check
	S_IS_FORWARD_REF before trying to simplify/resolve an expression.
	(equals): Handle ==.
	* config/tc-ia64.h (md_parse_name): Add mode parameter.
	* config/tc-arc.c (arc_parse_cons_expression): Likewise.
	* config/tc-m32r.h (md_parse_name): Likewise.
	(m32r_parse_name): Likewise.
	* config/tc-mmix.h (md_parse_name): Likewise.
	* config/tc-mn10300.h (md_parse_name): Likewise.
	(mn10300_parse_name): Likewise.
	* config/tc-ppc.h (md_parse_name): Likewise.
	* config/tc-sh.h (md_parse_name): Likewise.
	(sh_parse_name): Likewise.
	* config/tc-sh64.h (md_parse_name): Likewise.
	(sh64_consume_datalabel): Likewise.
	* config/tc-tic54x.h (md_parse_name): Likewise.
	* config/tc-m32r.c (m32r_parse_name): Add mode parameter. Check it
	before trying to evaluate symbol.
	* config/tc-mn10300.c (mn10300_parse_name): Likewise.
	* config/tc-sh.c (sh_parse_name): Likewise.
	* config/tc-sh64.c (sh64_consume_datalabel): Add mode parameter. Pass
	second argument to operandf. Pass mode parameter to sh_parse_name.
	* doc/as.texinfo: Document .eqv and the == assignment operator.

2005-10-10  Ian Lance Taylor  <[email protected]>

	* Makefile.am (EXTRA_DIST): Remove bfin-lex.l and bfin-defs.h.
	* Makefile.in: Regenerate.

2005-10-10  Arnold Metselaar  <[email protected]>

	* expr.c (operator): Allow "!=" as a synonym for "<>".
	* doc/as.texinfo (Infix Op): Mention "!=".

2005-10-08  John David Anglin  <[email protected]>

	* config/tc-hppa.c (strict): Don't initialize.  Update comment.
	(pa_ip): Promote from PA 1.0 to 1.1 immediately when 1.1 match is
	found.  Simplify handling of "ma" and "mb" completers.

2005-10-08  Paul Brook  <[email protected]>

	* config/tc-arm.c: Don't provide fallback default for CPU_DEFAULT.
	(arm_arch_used, thumb_arch_used, selected_cpu, selected_cpu_name):
	New variables.
	(arm_cpu_option_table): Add canonical_name.
	(arm_cpus): Populate canonical_name field.
	(s_arm_eabi_attribute, s_arm_arch, s_arm_cpu, s_arm_fpu,
	aeabi_set_public_attributes, arm_md_end): New functions.
	(md_pseudo_table): Add "cpu", "arch", "fpu" and "eabi_attribute".
	(md_assemble): Set thumb_arch_used and arm_arch_used.
	(md_begin): Set defaut cpu if CPU_DEFAULT not defined.
	* config/tc-arm.h (md_end): Define.
	* doc/c-arm.texi: Document .cpu, .arch, .fpu and .eabi_attribute.

2005-10-06  Khem Raj  <[email protected]>
            NIIBE Yutaka  <[email protected]>

	* config/tc-sh.c (allow_dollar_register_prefix): New variable.
	(parse_reg_without_prefix): New function.
	(parse_reg): Check for '$' register prefix if --allow-reg-prefix is
	set.
	(option md_longopts): Add allow-reg-prefix option.
	* doc/c-sh.texi: Document --allow-reg-prefix option.
	* NEWS: Mention the new switch.

2005-10-03  Arnold Metselaar  <[email protected]>

	* doc/as.texinfo (Infix Ops):  '<' and '>' are not shift
	operators.

2005-09-30  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_frob_label): Disallow labels in bundles.

2005-09-30  H.J. Lu  <[email protected]>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.

2005-09-30  Mark Mitchell  <[email protected]>

	* as.c (main): Use expandargv.

2005-09-30  Jan Beulich  <[email protected]>

	* config/tc-tic4x.c (tic4x_set): Advance input_line_pointer past
	(removed) comma.

2005-09-30  Catherine Moore  <[email protected]>

	* Makefile.am: Bfin support.
	* Makefile.in: Regenerated.
	* aclocal.m4: Regenerated.
	* configure: Regenerated.
	* configure.in: Bfin support.
	* configure.tgt: Bfin support.
	* config/bfin-aux.h: New file.
	* config/bfin-defs.h: New file.
	* config/bfin-lex.l: New file.
	* config/bfin-parse.y: New file.
	* config/tc-bfin.c: New file.
	* config/tc-bfin.h: New file.
	* doc/Makefile.am: Recognize c-bfin.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Bfin support.
	* doc/as.texinfo: Likewise.
	* doc/c-bfin.texi: Document bfin-specific syntax and
	directives.

2005-09-30  Paul Brook  <[email protected]>

	* config/tc-arm.c (opcode_tag): Add OT_cinfix3_legacy.
	(opcode_lookup): Handle OT_cinfix3_legacy.  Revert earlier change for
	normal infix conditions.
	(C3E): Include Thumb-2 definition.
	(CL, cCL): Define.
	(insns): Use them for legacy mnemonics.

2005-09-30  Matthias Kurz  <[email protected]>

	* asintl.h: Prevent the inclusion of <libintl.h> from the Solaris
	version of <locale.h> when ENABLE_NLS is not defined.

2005-09-29  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_operands): Always parse first operand of
	alloc.

2005-09-29  Arnold Metselaar <[email protected]>
	    Alan Modra  <[email protected]>

	* app.c (do_scrub_chars): Match open and close quote of strings.
	Remove redundant EOF test in case 7.

2005-09-28  Jan Beulich  <[email protected]>

	* config/tc-i386.c (reloc): Disable signedness check for 4-byte
	relocations in 16- and 32-bit modes.
	(i386_displacement): Make pc-relative branch handling dependent
	upon operand (rather than address) size.

2005-09-28  Jan Beulich  <[email protected]>

	* dw2gencfi.c (dot_cfi): Call ignore_rest_of_line when not fully
	parsing the input.
	(dot_cfi_startproc): Likewise.
	(dot_cfi_endproc): Likewise. Also check no extra input was given.
	(dot_cfi_escape): Likewise.

2005-09-28  Jan Beulich  <[email protected]>

	* config/tc-i386.h (x86_cons_fix_new): Declare unconditionally.
	(TC_CONS_FIX_NEW): Define unconditionally.
	(x86_pe_cons_fix_new): Remove.
	* config/tc-i386.c (signed_cons): New.
	(md_pseudo_table): Add slong.
	(x86_cons_fix_new): Declare unconditionally.
	(x86_pe_cons_fix_new): Merge into x86_cons_fix_new.
	(tc_gen_reloc): Also consider BFD_RELOC_X86_64_32S for gotpc
	conversion.

2005-09-28  Arnold Metselaar  <[email protected]>

	* app.c (do_scrub_chars <LEX_IS_SYMBOL_COMPONENT>): Check for full
	buffer after copying string.

2005-09-27  Paul Brook  <[email protected]>

	* config/arm.c (arm_cpus): Add more cpu names.
	* doc/c-arm.texi: Document them.

2005-09-21  Alan Modra  <[email protected]>

	* read.c (pseudo_set): Don't set undefined symbols to expr_section.

2005-09-20  Richard Henderson  <[email protected]>

	* dwarf2dbg.c (process_entries): Fix uninitialized variable warning.

2005-09-20  Richard Henderson  <[email protected]>

	* dwarf2dbg.c (struct line_entry): Replace frag and frag_ofs
	with label.
	(dwarf2_loc_mark_labels): New.
	(dwarf2_gen_line_info_1): Split out of ...
	(dwarf2_gen_line_info): ... here.  Create the temp symbol here.
	(dwarf2_emit_label): New.
	(dwarf2_directive_loc_mark_labels): New.
	(out_set_addr): Take a symbol instead of frag+ofs.
	(relax_inc_line_addr): Likewise.
	(emit_inc_line_addr): Assert delta non-negative.
	(process_entries): Remove dead code.  Update to work with temp
	symbols instead of frag+ofs.
	* dwarf2dbg.h (dwarf2_directive_loc_mark_labels): Declare.
	(dwarf2_emit_label, dwarf2_loc_mark_labels): Declare.
	* config/obj-elf.c (elf_pseudo_tab): Add loc_mark_labels.
	* config/obj-elf.h (obj_frob_label): New.
	* config/tc-alpha.c (alpha_define_label): Call dwarf2_emit_label.
	* config/tc-arm.c, config/tc-hppa.c, config/tc-m68k.c,
	config/tc-mips.c, config/tc-ppc.c, config/tc-sh.c, config/tc-xtensa.c:
	Similarly in the respective tc_frob_label implementation functions.
	* config/tc-i386.c (md_pseudo_table): Move file and loc to
	non-elf section; add loc_mark_labels.
	* config/tc-ia64.c (struct label_fix): Add dw2_mark_labels.
	(ia64_flush_insns): Check for marked labels; emit line entry if so.
	(emit_one_bundle): Similarly.
	(ia64_frob_label): Record marked labels.
	* config/tc-m68hc11.h (tc_frob_label): Remove.
	* config/tc-ms1.c (md_pseudo_table): Remove file and loc.
	* config/tc-sh.h (tc_frob_label): Pass sym to sh_frob_label.
	* config/tc-sh64.h (tc_frob_label): Likewise.
	* doc/as.texinfo (LNS directives): Docuement .loc_mark_blocks.

2005-09-20  Alan Modra  <[email protected]>

	* read.c (pseudo_set): Set segment of expression syms to expr_section.

2005-09-14  Jan Beulich  <[email protected]>

	* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Add selector
	registers, floating point control and status words, and mxcsr as
	well as (for 64-bit code) segment base registers and rflags.

2005-09-09  Dmitry Diky  <[email protected]>

	* config/tc-msp430.c (msp430_operands): Undo last changes. Instead...
	(msp430_relax_frag): add a guard check to ensure that final fr_subtype
	has been reached.

2005-09-08  Chao-ying Fu  <[email protected]>

	* doc/as.texinfo: Document -mdsp and -mno-dsp options.
	* doc/c-mips.texi: Likewise, and document ".set dsp" and ".set nodsp"
	directives.

2005-09-08  Paul Brook  <[email protected]>

	* config/tc-arm.c (do_smi, do_t_smi): Rename ...
	(do_smc, do_t_smc): ... to this.
	(insns): Remane smi to smc.
	(md_apply_fix, tc_gen_reloc): Rename BFD_RELOC_ARM_SMI to
	BFD_RELOC_ARM_SMC.

2005-09-07  Richard Henderson  <[email protected]>

	* dwarf2dbg.c (dwarf2_where): Set line->isa.
	(dwarf2_set_isa): New.
	(dwarf2_directive_loc): Rearrange to allow all options on one line.
	* dwarf2dbg.h (dwarf2_set_isa): Declare.
	* doc/as.texinfo: Update .loc documentation.

2005-09-07  Richard Henderson  <[email protected]>

	* dwarf2dbg.c: Include safe-ctype.h.
	(DWARF2_LINE_OPCODE_BASE): Bump to 13.
	(current): Initialize.
	(dwarf2_emit_insn): Clear DWARF2_FLAG_BASIC_BLOCK,
	DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN.
	(dwarf2_directive_file): Cope with invalid filename.
	(dwarf2_directive_loc): Add handling for basic_block, prologue_end,
	epilogue_begin, is_stmt, isa.
	(emit_inc_line_addr): Move line_delta == 0, addr_delta == 0 special
	case down lower.
	(process_entries): Handle isa, DWARF2_FLAG_PROLOGUE_END,
	and DWARF2_FLAG_EPILOGUE_BEGIN.
	(out_debug_line): Emit sizes for DW_LNS_set_prologue_end,
	DW_LNS_set_epilogue_begin, DW_LNS_set_isa.
	* dwarf2dbg.h (DWARF2_FLAG_IS_STMT): Rename from DWARF2_FLAG_BEGIN_STMT.
	(DWARF2_FLAG_BASIC_BLOCK): Rename from DWARF2_FLAG_BEGIN_BLOCK.
	(DWARF2_FLAG_PROLOGUE_END, DWARF2_FLAG_EPILOGUE_BEGIN): New.
	(struct dwarf2_line_info): Add isa member.
	* doc/as.texinfo (LNS directives): New node.

2005-09-07  David Ung  <[email protected]>

	* config/tc-mips.c (append_insn): Undo last change.  Instead add
	guard to suppress calling frag_grow if the current instruction is
	one that allows a delay slot.

2005-09-06  Chao-ying Fu  <[email protected]>

	* config/tc-mips.c (mips_set_options): Add ase_mt for MT instructions.
	(mips_opts): Add -1 to initialize ase_mt.
	(file_ase_mt): New variable for -mmt.
	(CPU_HAS_MT): New define.
	(validate_mips_insn): Add supports for +t, +T, !, $, *, &, g operand
	formats.
	(mips_ip): Check ase_mt to enable MT instructions.
	Handle !, $, *, &, +T, +t, g operand formats.
	For "mftc1", "mfthc1", "cftc1", "mttc1", "mtthc1", "cttc1", we allow
	odd float registers.
	(OPTION_MT, OPTION_NO_MT): New define.
	(OPTION_COMPAT_ARCH_BASE): Change because of inserting MT define.
	(md_parse_option): Parse OPTION_MT and OPTION_NO_MT.
	(mips_after_parse_args): Set ase_mt based on CPU.
	(s_mipsset): Handle ".set mt" and ".set nomt".
	(mips_elf_final_processing): Remind of adding new flag for MT ASE.
	(md_show_usage): Show usage of -mmt and -mno-mt.
	* doc/as.texinfo: Document -mmt and -mno-mt options.
	* doc/c-mips.texi: Likewise, and document ".set mt" and ".set nomt"
	directives.

2005-09-06  Paul Brook  <[email protected]>

	* config/tc-arm.c (arm_it): Add relax field.
	(T16_32_TAB): Add addi, addis, add_pc, add_sp, dec_sp, inc_sp,
	b, bcond, ldr_pc, ldr_pc2, ldr_sp, str_sp, subi, subis.
	(do_t_add_sub, do_t_addr, do_t_branch, do_t_ldst,
	do_t_mov_cmp): Allow relaxation.
	(output_relax_insn): New function.
	(put_thumb32_insn): New function.
	(output_inst): Use new functions.
	(md_assemble): Don't throw error on relaxable instructions.
	(insns): Change "b" entry from TCE(...) to tCE(...).
	(md_estimate_size_before_relax): Return 2.
	(md_convert_frag, relax_immediate, relax_adr, relax_addsub,
	relax_branch, arm_relax_frag): New functions.
	(arm_force_relocation): Return 0 for Thumb-2 immediate operand
	relocations.
	* config/tc-arm.h (md_convert_frag): Remove definition.
	(md_relax_frag): Define.
	(arm_relax_frag): Add prototype.

2005-09-02  Paul Brook  <[email protected]>

	* config/tc-arm.c (do_rn_rd): Enforce SWP operand constraints.

2005-09-02  Paul Brook  <[email protected]>

	* config/tc-arm.c (encode_arm_cp_address): Use
	BFD_RELOC_ARM_T32_CP_OFF_IMM in thumb mode.
	(do_iwmmxt_wldstbh): Use BFD_RELOC_ARM_T32_CP_OFF_IMM_S2 in thumb
	mode.
	(md_assemble): Only allow coprocessor instructions when Thumb-2 is
	available.
	(cCE, cC3): Define.
	(insns): Use them for coprocessor instructions.
	(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM.
	(get_thumb32_insn): New function.
	(put_thumb32_insn): New function.
	(md_apply_fix): Handle BFD_RELOC_ARM_T32_CP_OFF_IMM and
	BFD_RELOC_ARM_T32_CP_OFF_IMM_S2.

2005-09-02  Paul Brook  <[email protected]>

	* config/tc-arm.c (opcode_lookup): Look for infix opcode when
	incorrect suffix matches.

2005-09-01  David Ung  <[email protected]>

	* config/tc-mips.c (append_insn): Correctly handle mips16 case
	when the frags are different for the 2 instructions we want to
	swap.  If the lengths of the 2 instructions are not the same, we
	won't do the swap but emit an nop.

2005-09-01  Dmitry Diky  <[email protected]>

	* config/tc-msp430.c (msp430_operands): Emit dwarf2_emit_insn()
	as appropriate. Change frag_variant() to frag_var() for relaxes.

2005-08-29  Nick Clifton  <[email protected]>

	* write.c (generic_force_reloc): Do not call S_FORCE_RELOC if
	there is no symbol.

2005-08-26  Jan Beulich  <[email protected]>

	* config/tc-i386.c (intel_e09): Set JumpAbsolute when seeing a PTR-
	qualified operand of a branch.
	(intel_bracket_expr): Set JumpAbsolute here...
	(intel_e11): ... rather than here.

2005-08-26  Christian Groessler  <[email protected]>

	* configure.tgt: Set bfd_gas also for z8k cpu.
	* config/tc-z8k.c (s_segm): Use bfd_set_arch_mach to set machine
	type.
	(newfix): Adapt to bfd reloc types.
	(build_bytes): Adapt to bfd reloc types.  Ensure that enough space
	is available in the current frag.
	(md_convert_frag): Adapt function parameters.
	(tc_gen_reloc): New function.
	(md_section_align): Use bfd_get_section_alignment.
	(md_apply_fix): Adapt to bfd reloc types.  Fix handling of
	BFD_RELOC_Z8K_IMM4L, BFD_RELOC_8, BFD_RELOC_16, and BFD_RELOC_32
	relocations.
	* config/tc-z8k.h (TARGET_ARCH): Define.
	(tc_fix_adjustable): Define.

2005-08-25  Chao-ying Fu  <[email protected]>

	* config/tc-mips.c (mips_set_options): Add ase_dsp for DSP instructions.
	(mips_opts): Add -1 to initialize ase_dsp.
	(file_ase_dsp): New variable for -mdsp.
	(CPU_HAS_DSP): New define.
	(validate_mips_insn): Add supports for 3, 4, 5, 6, 7, 8, 9, 0, ', :, @
	operand formats.
	(mips_ip): Add min_range and max_range for checking singed numbers.
	Check ase_dsp to enable DSP instructions.
	Handle 3, 4, 5, 6, 7, 8, 9, 0, ', :, @ operand formats.
	(OPTION_DSP, OPTION_NO_DSP): New define.
	(OPTION_COMPAT_ARCH_BASE): Change because of inserting DSP define.
	(md_parse_option): Parse OPTION_DSP and OPTION_NO_DSP.
	(mips_after_parse_args): Set ase_dsp based on CPU.
	(s_mipsset): Handle ".set dsp" and ".set nodsp".
	(mips_elf_final_processing): Remind of adding new flag for DSP ASE.
	(md_show_usage): Show usage of -mdsp and -mno-dsp.

2005-08-23  David Ung  <[email protected]>

	* config/tc-mips.c (mips_cpu_info_table): Add 5kf to the table of
	cpu names.

2005-08-23  Alan Modra  <[email protected]>

	PR 1036
	* config/tc-ppc.c (ppc_symbol_chars): Add '%' and '['.

2005-08-23  Phil Edwards  <[email protected]>

	* configure.tgt (*-*-vxworks):  Match vxworks* instead.

2005-08-22  Jan Beulich  <[email protected]>

	* config/tc-i386.c (object_64bit): New.
	(i386_target_format): Initialize it.
	(output_disp): Use object_64bit for relocation type determination.
	(output_imm): Likewise.
	(i386_validate_fix): Likewise.
	(tc_gen_reloc): Likewise.
	(lex_got): Likewise. Remove static mode_name. Change array size
	of gotrel's rel field, and adjust its initializer. Adjust diagnostic.
	(x86_cons): Use object_64bit for deciding whether quad fields can
	have relocations.

2005-08-18  Christian Groessler  <[email protected]>

	* config/tc-h8300.h: Remove TC_RELOC_MANGLE/tc_reloc_mangle.
	* config/tc-mcore.h: Likewise.
	* config/tc-z8k.h: Likewise.
	* config/tc-z8k.c: Likewise.
	* config/tc-sh.h: Remove TC_RELOC_MANGLE and
	sh_coff_reloc_mangle declaration.
	* config/tc-sh.c: (md_apply_fix): Fix comment for case
	BFD_RELOC_SH_USES.

2005-08-18  Kaz Kojima  <[email protected]>

	* config/tc-sh64.c (sh64_target_format): Check preset_target_arch
	to confirm that no ISA is specified.

2005-08-18  Nick Clifton  <[email protected]>

	* write.c (relax_segment): Count the number of frags being
	processed and use this to compute a maximum limit on the number of
	iterations that will be allowed when attempting to relax the
	segment.

2005-08-17  Danny Smith  <[email protected]>

	* config/obj-coff.c (obj_coff_weak): Set auxiliary record
	of NT weak externals to IMAGE_WEAK_EXTERN_SEARCH_NOLIBRARY.

2005-08-16  Alan Modra  <[email protected]>

	* config/tc-ppc.c (ppc_set_cpu): Don't select 64-bit based on
	default cpu.

2005-08-15  Paul Brook  <[email protected]>

	* config/tc-arm.c (do_t_mov_cmp): Fix encoding of i16-bit conditional
	instructions.
	(do_t_mvn_tst, do_t_neg, do_t_shift): Ditto.

2005-08-15  Daniel Jacobowitz  <[email protected]>

	* config/tc-ppc.c (parse_cpu): Add -me300 support.
	(md_show_usage): Likewise.
	* doc/c-ppc.texi (PowerPC-Opts): Document it.

2005-08-12 Martin Schwidefsky  <[email protected]>

	* config/tc-s390.c (md_parse_option):  Add cpu type z9-109.
	(md_gather_operands): Add support for optional operands.

2005-08-12  Dmitry Diky <[email protected]>
	* config/tc-msp430.c (msp430_enable_relax): New flag.
	(msp430_enable_polys): Likewise.
	(OPTION_RELAX): New option.
	(OPTION_POLYMORPHS): Likewise.
	(md_longopts): New long options.
	(md_show_usage): Updated.
	(md_parse_option): Add new options handler.
	(msp430_operands): Add check if polymorph insns are enabled.
	(msp430_force_relocation_local): New function.
	(md_apply_fix): Now delete relocs according to new flags combination.
	(msp430_relax_frag): Convert long branches to short branches only if
	flag msp430_enable_relax is set.
	* config/tc-msp430.h (TC_FORCE_RELOCATION_LOCAL): Defined.
	(msp430_force_relocation_local): Likewise.
	* doc/c-msp430.texi: Describe new options.

2005-08-11  Ian Lance Taylor  <[email protected]>

	* Makefile.am ($(srcdir)/make-gas.com): Remove target.
	(stamp-mk.com): Likewise.
	(EXTRA_DIST): Remove make-gas.com from list.
	(MOSTLYCLEANFILES): Remove stamp-mk.com from list.
	* Makefile.in: Regenerate.

2005-08-11  Hans-Peter Nilsson  <[email protected]>

	* subsegs.c (subseg_change): Move declaration of seginfo to before
	first statement.

2005-08-11  Alan Modra  <[email protected]>

	* README-vms: Delete.
	* config-gas.com: Delete.
	* makefile.vms: Delete.
	* vmsconf.sh: Delete.
	* config/atof-tahoe.c: Delete.
	* config/m88k-opcode.h: Delete.
	* config/obj-bout.c: Delete.
	* config/obj-bout.h: Delete.
	* config/obj-hp300.c: Delete.
	* config/obj-hp300.h: Delete.
	* config/tc-a29k.c: Delete.
	* config/tc-a29k.h: Delete.
	* config/tc-h8500.c: Delete.
	* config/tc-h8500.h: Delete.
	* config/tc-m88k.c: Delete.
	* config/tc-m88k.h: Delete.
	* config/tc-tahoe.c: Delete.
	* config/tc-tahoe.h: Delete.
	* config/tc-tic80.c: Delete.
	* config/tc-tic80.h: Delete.
	* config/tc-w65.c: Delete.
	* config/tc-w65.h: Delete.
	* config/te-aux.h: Delete.
	* config/te-delt88.h: Delete.
	* config/te-delta.h: Delete.
	* config/te-dpx2.h: Delete.
	* config/te-hp300.h: Delete.
	* config/te-ic960.h: Delete.
	* config/vms-a-conf.h: Delete.
	* doc/c-a29k.texi: Delete.
	* doc/c-h8500.texi: Delete.
	* doc/c-m88k.texi: Delete.
	* README: Remove obsolete examples, and list of supported targets.
	* Makefile.am: Remove a29k, h8500, m88k, tahoe, tic80, w65,
	bout and hp300 support.
	(DEP_FLAGS): Don't define BFD_ASSEMBLER.
	* configure.in: Remove --enable-bfd-assembler, need_bfd,
	primary_bfd_gas.
	* configure.tgt: Remove a29k, h8300-coff, h8500-*, i960 non-elf,
	m68k non bfd, m88k, or32-coff, tic80-*, vax non-bfd, w65k-*, *-nindy.
	* as.c: Remove all non-BFD_ASSEMBLER code, support for above targets.
	* as.h: Likewise.
	* dw2gencfi.c: Likewise.
	* dwarf2dbg.c: Likewise.
	* ehopt.c: Likewise.
	* input-file.c: Likewise.
	* listing.c: Likewise.
	* literal.c: Likewise.
	* messages.c: Likewise.
	* obj.h: Likewise.
	* output-file.c: Likewise.
	* read.c: Likewise.
	* stabs.c: Likewise.
	* struc-symbol.h: Likewise.
	* subsegs.c: Likewise.
	* subsegs.h: Likewise.
	* symbols.c: Likewise.
	* symbols.h: Likewise.
	* tc.h: Likewise.
	* write.c: Likewise.
	* write.h: Likewise.
	* config/aout_gnu.h: Likewise.
	* config/obj-aout.c: Likewise.
	* config/obj-aout.h: Likewise.
	* config/obj-coff.c: Likewise.
	* config/obj-coff.h: Likewise.
	* config/obj-evax.h: Likewise.
	* config/obj-ieee.h: Likewise.
	* config/tc-arm.c: Likewise.
	* config/tc-arm.h: Likewise.
	* config/tc-avr.c: Likewise.
	* config/tc-avr.h: Likewise.
	* config/tc-crx.h: Likewise.
	* config/tc-d10v.h: Likewise.
	* config/tc-d30v.h: Likewise.
	* config/tc-dlx.h: Likewise.
	* config/tc-fr30.h: Likewise.
	* config/tc-frv.h: Likewise.
	* config/tc-h8300.c: Likewise.
	* config/tc-h8300.h: Likewise.
	* config/tc-hppa.h: Likewise.
	* config/tc-i370.h: Likewise.
	* config/tc-i386.c: Likewise.
	* config/tc-i386.h: Likewise.
	* config/tc-i860.h: Likewise.
	* config/tc-i960.c: Likewise.
	* config/tc-i960.h: Likewise.
	* config/tc-ip2k.h: Likewise.
	* config/tc-iq2000.h: Likewise.
	* config/tc-m32c.h: Likewise.
	* config/tc-m32r.h: Likewise.
	* config/tc-m68hc11.h: Likewise.
	* config/tc-m68k.c: Likewise.
	* config/tc-m68k.h: Likewise.
	* config/tc-maxq.c: Likewise.
	* config/tc-maxq.h: Likewise.
	* config/tc-mcore.c: Likewise.
	* config/tc-mcore.h: Likewise.
	* config/tc-mn10200.h: Likewise.
	* config/tc-mn10300.c: Likewise.
	* config/tc-mn10300.h: Likewise.
	* config/tc-ms1.h: Likewise.
	* config/tc-msp430.c: Likewise.
	* config/tc-msp430.h: Likewise.
	* config/tc-ns32k.c: Likewise.
	* config/tc-ns32k.h: Likewise.
	* config/tc-openrisc.h: Likewise.
	* config/tc-or32.c: Likewise.
	* config/tc-or32.h: Likewise.
	* config/tc-ppc.c: Likewise.
	* config/tc-ppc.h: Likewise.
	* config/tc-s390.h: Likewise.
	* config/tc-sh.c: Likewise.
	* config/tc-sh.h: Likewise.
	* config/tc-sparc.c: Likewise.
	* config/tc-tic30.c: Likewise.
	* config/tc-tic30.h: Likewise.
	* config/tc-tic4x.c: Likewise.
	* config/tc-tic4x.h: Likewise.
	* config/tc-tic54x.c: Likewise.
	* config/tc-tic54x.h: Likewise.
	* config/tc-v850.h: Likewise.
	* config/tc-vax.c: Likewise.
	* config/tc-vax.h: Likewise.
	* config/tc-xstormy16.h: Likewise.
	* config/tc-xtensa.h: Likewise.
	* config/tc-z8k.c: Likewise.
	* config/tc-z8k.h: Likewise.
	* config/vms-a-conf.h
	* doc/Makefile.am: Likewise.
	* doc/all.texi: Likewise.
	* doc/as.texinfo: Likewise.
	* doc/internals.texi: Likewise.
	* doc/Makefile.in: Regenerate.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* config.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2005-08-09  Nick Clifton  <[email protected]>

	PR 1070
	* macro.c (getstring): Do not treat round parentheses exactly the
	same as angle brackets - the parentheses need to be preserved and
	passed on to the macro processing code.

2005-08-08  Nick Clifton  <[email protected]>

	* config/tc-msp430.c (MSP430_ISA_21): Define.
	(mcu_types): Add entries for msp430x21xx variants.

2005-08-08  Nick Clifton  <[email protected]>

	PR 1070
	* macro.c (getstring): Treat round parentheses in the same way as
	angle brackets.
	(get_any_string): Likewise.

2005-08-07  H.J. Lu  <[email protected]>

	PR gas/1118
	* as.c (parse_args): Handle -al=<FILE>.

2005-08-07  Nick Clifton  <[email protected]>

	* read.c (s_app_line): Accept a line number of 0 for compatibility
	with gcc's output for assembler-with-cpp files.

2005-08-05  Paul Brook  <[email protected]>

	* config/tc-arm.c (current_it_mask, current_cc): New variables.
	(do_t_add_sub): Use correct encodings inside IT block.
	(do_t_arit3c): Ditto.
	(do_t_it): Simplify logic.  Set current_it_mask and current_cc.
	(md_assemble): Verify conditional suffixes agains IT blocks.

2005-08-05  Paul Brook  <[email protected]>

	* config/tc-arm.c (encode_thumb32_immediate): Only accept shifted
	constants.
	(encode_thumb32_shifted_operand): Prohibit register shifts.
	(encode_thumb32_addr_mode): Fix typo.
	(insns): Correct thumb2 ldm and stm opcodes.

2005-08-02  Khem Raj  <[email protected]>

	* config/tc-arm.c (do_iwmmxt_wldstd): Correct the offset range for
	WLDRD/WSTRD instruction.

2005-08-02  Alan Modra  <[email protected]>

	* config/tc-ppc.c (md_apply_fix <ELF>): Don't warn on overflow
	if emitting a reloc.

2005-07-29  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (s_mips_globl): Allow multiple symbols per .globl.

2005-07-29  Paul Brook  <[email protected]>

	* config/tc-arm.c (T16_32_TAB): Add "addr". Fix encoding of push and
	pop.
	(do_t_addr): Implement 32-bit variant.
	(do_t_push_pop): Make some errors warnings.  Handle single register
	32-bit case.
	(insns): Use tCE for adr.
	(md_pcrel_from_section): Handle BFD_RELOC_ARM_T32_ADD_PC12.
	(md_apply_fix): Ditto.

2005-07-29  Paul Brook  <[email protected]>

	* config/tc-arm.c (parse_tb): New function.
	(enum operand_parse_code): Add OP_TB.
	(parse_operands): Handle OP_TB.
	(do_t_add_sub_w, do_t_tb): New functions.
	(insns): Add entries for addw, subw, tbb and tbh.
	(md_apply_fix): Handle BFD_RELOC_ARM_T32_IMM12.

2005-07-29  Kazuhiro Inaoka <[email protected]>

	* config/tc-m32r.c (m32r_check_fixup): Fixed X_op check.

2007-07-27  H.J. Lu <[email protected]>

	* config/tc-i386.c (handle_large_common): Declare only for ELF.

2005-07-27  Jan Beulich  <[email protected]>

	* config/tc-ia64.h (unw_r_record): Change type of fr_mem to unsigned
	int.
	(unw_p_record): Remove unused/redundant fields imask and rmask.
	Combine spoff and pspoff into a union. Combine gr and br into a
	union. Change type of grmask and brmask to unsigned char. Change type
	of frmask to unsigned int.
	(unw_x_record): Combine spoff, pspoff, and treg into a union.
	* config/tc-ia64.c (unwind): New field 'pending_saves'.
	(check_pending_save): New.
	(alloc_record): Clear out entire record.
	(output_psp_gr): Use renamed structure fields.
	(output_psp_sprel): Likewise.
	(output_rp_gr): Likewise.
	(output_rp_br): Likewise.
	(output_rp_psprel): Likewise.
	(output_rp_sprel): Likewise.
	(output_pfs_gr): Likewise.
	(output_pfs_psprel): Likewise.
	(output_pfs_sprel): Likewise.
	(output_preds_gr): Likewise.
	(output_preds_psprel): Likewise.
	(output_preds_sprel): Likewise.
	(output_spill_base): Likewise.
	(output_unat_gr): Likewise.
	(output_unat_psprel): Likewise.
	(output_unat_sprel): Likewise.
	(output_lc_gr): Likewise.
	(output_lc_psprel): Likewise.
	(output_lc_sprel): Likewise.
	(output_fpsr_gr): Likewise.
	(output_fpsr_psprel): Likewise.
	(output_fpsr_sprel): Likewise.
	(output_priunat_gr): Likewise.
	(output_priunat_psprel): Likewise.
	(output_priunat_sprel): Likewise.
	(output_bsp_gr): Likewise.
	(output_bsp_psprel): Likewise.
	(output_bsp_sprel): Likewise.
	(output_bspstore_gr): Likewise.
	(output_bspstore_psprel): Likewise.
	(output_bspstore_sprel): Likewise.
	(output_rnat_gr): Likewise.
	(output_rnat_psprel): Likewise.
	(output_rnat_sprel): Likewise.
	(output_spill_psprel): Likewise.
	(output_spill_sprel): Likewise.
	(output_spill_reg): Likewise.
	(output_fr_mem): Likewise. Allocate one unwind record per set mask
	bit.
	(output_frgr_mem): Likewise.
	(output_gr_mem): Likewise.
	(output_br_mem): Likewise.
	(output_gr_gr): Likewise.
	(output_br_gr): Likewise.
	(fixup_unw_records): Likewise.
	(process_one_record): Use renamed structure fields. For gr_gr and
	br_gr, collect mask from chain of records before output.
	(in_prologue): Simplify and eliminate early returns. Call
	check_pending_save.
	(in_body): Simplify and eliminate early returns.
	(dot_body): Call check_pending_save.
	(md_assemble): Update comment. Deal with pending saves.

2005-07-26  Jan Beulich  <[email protected]>

	* config/tc-i386.c (optimize_imm): Calculate candidate immediates
	mask from guessed suffix, but mask out other immediate types only
	if at least on candidate is valid for the insn.

2005-07-25  DJ Delorie  <[email protected]>

	* config/tc-m32c.c (md_cgen_lookup_reloc): Add 8 bit operands.
	Support %mod() modifiers from opcodes.
	* doc/c-m32c.texi (M32C-Modifiers): New section.

2005-07-25  Jan Hubicka  <[email protected]>
	    H.J. Lu  <[email protected]>

	* config/obj-elf.c: Include "elf/x86-64.h" if TC_I386 is
	defined.
	(elf_com_section_ptr): New.
	(elf_begin): Set elf_com_section_ptr to bfd_com_section_ptr.
	(elf_common_parse): Make it global. Use elf_com_section_ptr
	instead of bfd_com_section_ptr.
	(obj_elf_change_section): Handle x86-64 large bss sections.

	* config/obj-elf.h (elf_com_section_ptr): New.
	(elf_common_parse): New.

	* config/tc-i386.c (handle_large_common): New.
	(md_pseudo_table): Add "largecomm".
	(x86_64_section_letter): New.
	(x86_64_section_word): New.

	* config/tc-i386.h (x86_64_section_word): New.
	(x86_64_section_letter): New.
	(md_elf_section_letter): New. Defined.
	(md_elf_section_word): Likewise.

2005-07-21  Ralf Corsepius  <[email protected]>

	* configure.tgt: Remove i386-*-rtemself*.
	Remove sparc-*-rtemself*.

2005-07-21  Ben Elliston  <[email protected]>

	* config/tc-m68k.h: Remove TE_LYNX conditional code.

2005-07-21  Paul Brook  <[email protected]>

	* config/tc-arm.c (encode_thumb32_addr_mode): Don't set
	inst.reloc.pc_rel.

2005-07-20  Tavis Ormandy <[email protected]>

	* messages.c: Use vsnprintf instead of vsprintf.

2005-07-20  Kazuhiro Inaoka  <[email protected]>

	* config/tc-m32r.c (tc_gen_reloc): Check BFD_RELOC_32_PCREL and
	BFD_RELOC_16_PCREL to Support R_M32R_REL32.

2005-07-18  Nick Clifton  <[email protected]>

	* configure.tgt: Restore alpha ordering to list of arches.

2005-07-18  John David Anglin  <[email protected]>

	* tc-hppa.c (pa_ip): Reject match for '#' immediate if not pa20.

2005-07-18  Jan Beulich  <[email protected]>

	* config/tc-i386.c (md_begin): Use IS_ELF.
	(tc_i386_fix_adjustable): Likewise.
	(md_estimate_size_before_relax): Likewise.
	(md_apply_fix): Likewise.
	(i386_target_format): Likewise.
	(lex_got): Define to NULL when not ELF or when LEX_AT. Check IS_ELF.
	(i386_immediate): Remove #ifdef LEX_AT.
	(i386_displacement): Likewise.
	* config/tc-i386.h (x86_cons): Prototype only when ELF and when not
	LEX_AT.

2005-07-18  Jan Beulich  <[email protected]>

	* config/tc-i386.c (reloc): Convert to ISO C90. Change first
	parameter to unsigned. Parameter sign now is tristate - zero/
	positive mean unsigned/signed, negative means signedness doesn't
	matter. Check field size,
	signedness, and pcrel-ness are in agreement between relocated field
	and relocation type. Adjust diagnostics.
	(optimize_imm): And type mask of operand instead of overwriting it.
	(lex_got): Convert to ISO C90. Add third parameter. Add new field to
	local structure and initialize gotrel accordingly. Pass caller as
	mask of types that the operator can match.
	(x86_cons_fix_new): Let reloc know that signedness of relocation
	doesn't matter.
	(x86_pe_cons_fix_new): Likewise.
	(x86_cons): Pass additional argument to lex_got.
	(i386_immediate): New local variable 'types'. Pass its address as
	additional argument to lex_got. Mask out operand types not supported
	befoe returning.
	(i386_displacement): Likewise. Set bigdisp to all types supported in
	64-bit mode, combining the previously split initialization.

2005-07-18  Jan Beulich  <[email protected]>

	* config/tc-i386.c (parse_insn): Reject prefix if unavailable in
	current mode.

2005-07-16  John David Anglin  <[email protected]>

	* config/tc-hppa.c (pa_ip): Search entire mnemonic before considering
	promoted match.

2005-07-16  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2007-07-15  H.J. Lu <[email protected]>

	* gas/config/tc-i386.h (CpuVMX): New.
	(CpuUnknownFlags): Add CpuVMX.

2005-07-14  Jim Blandy  <[email protected]>

	Add support for the Renesas M32C.
	* Makefile.am (CPU_TYPES): List m32c.
	(TARGET_CPU_CFILES): List config/tc-m32c.c.
	(TARGET_CPU_HFILES): List config/tc-m32c.h.
	* configure.in: Add case for m32c.
	* configure.tgt: Add cases for m32c and m32c-*-elf.
	* configure: Regenerated.
	* config/tc-m32c.c, config/tc-m32c.h: New files.
	* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set M32C.
	* doc/as.texinfo: Add text for the M32C-specific options and line
	comment characters, and refer to c-m32c.texi.
	* doc/c-m32c.texi: New file.

2005-07-14  Nick Clifton  <[email protected]>

	PR 1069
	* config/tc-crx.c (reset_vars): Use strncpy to prevent overflowing
	the ins_parse buffer.

2005-07-10  Ralf Corsepius <[email protected]>

	* configure.tgt: Remove a29k-*-rtems*, hppa*-*-rtems*,i386-go32-rtems*,
	i386-*-rtemscoff*, sparc-*-rtemsaout*.

2005-07-10  H.J. Lu  <[email protected]>

	* config/tc-i386.c (optimize_disp): Optimize signed 32bit
	displacements.

2005-07-08  Ben Elliston  <[email protected]>

	* frags.h: Remove ANSI_PROTOTYPES conditional code.
	* config/obj-elf.h: Likewise.
	* config/tc-h8300.h: Likewise.
	* config/tc-h8500.h: Likewise.
	* config/tc-i370.h: Likewise.
	* config/tc-i386.h: Likewise.
	* config/tc-m68hc11.h: Likewise.
	* config/tc-m68k.h: Likewise.
	* config/tc-ppc.h: Likewise.
	* config/tc-s390.h: Likewise.
	* config/tc-sh.h: Likewise.
	* config/tc-sparc.h: Likewise.
	* config/tc-tic30.c: Likewise.
	* config/tc-w65.h: Likewise.
	* config/tc-xtensa.h: Likewise.

2005-07-08  Hans-Peter Nilsson  <[email protected]>

	PR gas/1049
	* config/tc-cris.h (MD_APPLY_SYM_VALUE): Define.

2005-07-07  Kaveh R. Ghazi  <[email protected]>

	* config/tc-tic30.c (debug): Add format attribute.  Fix format
	bugs.

2005-07-06  H.J. Lu  <[email protected]>

	* config/tc-i386.c (cpu_arch): Add sse3.

	* config/tc-i386.h (CpuSSE3): Renamed from ...
	(CpuPNI): This. Defined as CpuSSE3.

	* doc/c-i386.texi: Document .sse3.

2005-07-06  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (nop): Use zero for L-unit pseudo-nop.

2005-07-05  Nick Clifton  <[email protected]>

	* config/tc-pdp11.c (md_apply_fix): Cast first argument to
	md_chars_to_numbers to an unsigned pointer in order to avoid a
	compile time warning.

2005-07-05  Paul Brook  <[email protected]>

	* config/tc-ppc.c (ppc_target_format): Add VxWorks.

2005-07-05  Aldy Hernandez  <[email protected]>

	* config/tc-ms1.c: New.
	* config/tc-ms1.h: New.
	* testsuite/gas/ms1/allinsn.d: New.
	* testsuite/gas/ms1/allinsn.s: New.
	* testsuite/gas/ms1/badinsn.s: New.
	* testsuite/gas/ms1/badinsn1.s: New.
	* testsuite/gas/ms1/badoffsethigh.s: New.
	* testsuite/gas/ms1/badoffsetlow.s: New.
	* testsuite/gas/ms1/badorder.s: New.
	* testsuite/gas/ms1/badreg.s: New.
	* testsuite/gas/ms1/badsignedimmhigh.s: New.
	* testsuite/gas/ms1/badsignedimmlow.s: New.
	* testsuite/gas/ms1/badsyntax.s: New.
	* testsuite/gas/ms1/badsyntax1.s: New.
	* testsuite/gas/ms1/badunsignedimmhigh.s: New.
	* testsuite/gas/ms1/badunsignedimmlow.s: New.
	* testsuite/gas/ms1/errors.exp: New.
	* testsuite/gas/ms1/ldst.s: New.
	* testsuite/gas/ms1/misc.d: New.
	* testsuite/gas/ms1/misc.s: New.
	* testsuite/gas/ms1/ms1-16-003.d: New.
	* testsuite/gas/ms1/ms1-16-003.s: New.
	* testsuite/gas/ms1/ms1.exp: New.
	* testsuite/gas/ms1/msys.d: New.
	* testsuite/gas/ms1/msys.s: New.
	* testsuite/gas/ms1/relocs.d: New.
	* testsuite/gas/ms1/relocs.exp: New.
	* testsuite/gas/ms1/relocs1.s: New.
	* testsuite/gas/ms1/relocs2.s: New.

2005-07-05  Jan Beulich  <[email protected]>

	* config/tc-i386.h (CpuSVME): New.
	(CpuUnknownFlags): Include CpuSVME.
	* config/tc-i386.c (cpu_arch): Add .pacifica and .svme. Add opteron
	as alias of sledgehammer.
	(md_assemble): Include invlpga in the check for insns with two source
	operands.
	(process_operands): Include SVME insns in the check for ignored
	segment overrides. Adjust diagnostic.
	(i386_index_check): Special-case SVME insns with memory operands.

2005-07-04  Khem Raj  <[email protected]>
	    Nick Clifton  <[email protected]>

	* tc-arm.c (struct arm_it): Make operands.imm signed to match its
	use an immediate value.
	(parse_vfp_reg_list): Make the 2nd parameter an unsigned pointer
	since the register field of the operands structure is unsigned.
	(s_arm_unwind_save_vfp): Make "reg" unsigned.
	(parse_operands): Make the 2ns parameter an unsigned pointer to
	match its use.
	(do_ldrd): When using the imm field of the operands structure as a
	second register field, treat it as unsigned.

2005-07-04  Alan Modra  <[email protected]>

	PR 1004
	* config/obj-elf.c (obj_elf_change_section): Use backend
	get_sec_type_attr.

2005-07-01  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (line_separator_chars): Add '{' and '}'.
	(output_spill_psprel, output_spill_psprel_p): Combine.
	(output_spill_sprel, output_spill_sprel_p): Combine.
	(output_spill_reg, output_spill_regp_p): Combine.
	(process_one_record): Handle psp_psprel.
	(parse_predicate_and_operand): New.
	(convert_expr_to_ab_reg): Two new parameters. Return void. Always
	initialize output values. Emit diagnostic case here.
	(convert_expr_to_xy_reg): Likewise. Don't allow r0, f0, and f1.
	(add_unwind_entry): New second parameter. Allow first parameter to
	be NULL. Parse optional tag, emit warning about further support for
	it otherwise being missing. Check end-of-line when requested.
	(dot_fframe): Clear operand when wrong. Allow tag.
	(dot_vframe): Likewise.
	(dot_vframesp): Likewise. Rename parameter, issue warning when psp
	relative.
	(dot_vframepsp): Remove.
	(dot_altrp): Clear operand when wrong. Allow tag.
	(dot_save): Likewise. Let default case also go through
	add_unwind_entry.
	(dot_savemem): Likewise.
	(dot_restore): Don't return when wrong operand. Allow tag.
	(dot_spillreg, dot_spillreg_p): Combine. Simplify by using
	parse_predicate_and_operand and the new arguments to
	convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
	when wrong operand. Allow tag.
	(dot_restorereg, dot_restorereg_p): Likewise.
	(dot_spillmem, dot_spillmem_p): Likewise.
	(dot_saveg): Clear operand when wrong. Perform tighter operand
	checks. Allow tag.
	(dot_savef): Likewise.
	(dot_saveb): Likewise.
	(dot_savegf): Likewise.
	(dot_spill): Remove end-of-line check. 	Combine. Simplify by using
	parse_predicate_and_operand and the new arguments to
	convert_expr_to_ab_reg and convert_expr_to_xy_reg. Don't return
	when wrong operand. Allow tag.
	(popcount): New.
	(dot_label_state): Don't return when wrong operand.
	(dot_copy_state): Likewise.
	(dot_unwabi): Likewise. Check if in prologue.
	(dot_body): Don't call demand_empty_rest_of_line.
	(dot_prologue): Type of mask and grsave is unsigned. Perform tighter
	operand checks.
	(md_pseudo_table): Also use dot_restorereg for .restorereg.p. Also
	use dot_spillreg for .spillreg.p. Also use dot_spillmem for
	.spillpsp.p and .spillsp.p. Also use dot_vframesp for .vframepsp.
	(parse_operand): New second parameter. Don't deal with '}' here
	anymore. Don't advance past end-of-line.
	(parse_operands): Pass second argument to parse_operand.
	(ia64_start_line): Prevent out-of-bounds access through
	input_line_pointer. Deal with '}' here.
	(ia64_unrecognized_line): Don't deal with '}' here.
	(dot_alias): Use ignore_rest_of_line not its deprecated alias
	discard_rest_of_line.

2005-06-30  Zack Weinberg  <[email protected]>

	* config/tc-arm.c (T_OPCODE_BRANCH, encode_arm_addr_mode_2)
	(encode_arm_addr_mode_3, encode_arm_cp_address, do_blx, do_t_blx)
	(do_t_branch, insns [b, bl]): Don't encode pipeline offset.
	(do_branch): Always set inst.reloc.pc_rel.
	(s_arm_elf_cons): Disallow use of (plt) suffix.
	(do_adrl): Adjust X_add_number unconditionally.
	(md_pcrel_from): Rename md_pcrel_from_section, add second segT
	argument.  Handle all adjustment for pipeline offset here.
	(md_apply_fix): No need to undo work of md_pcrel_from.  No
	need to extract pre-encoded pipeline adjustments from various
	branch instructions.  Generally, assume instructions are already
	all-bits-zero in the field being fixed up.  Remove all OBJ_ELF
	special cases.  Handle BFD_RELOC_ARM_PLT32 like
	BFD_RELOC_ARM_PCREL_BRANCH.
	(tc_gen_reloc): Remove OBJ_ELF special case.
	* config/tc-arm.c: Define MD_PCREL_FROM_SECTION.

2005-06-30  Ben Elliston  <[email protected]>

	* Makefile.am (check-DEJAGNU): Don't search for expect.
	* Makefile.in: Regenerate.

2005-06-30  Ben Elliston  <[email protected]>

	* Makefile.am (EXPECT): Set to expect.
	(RUNTEST): Likewise, set to runtest.
	* Makefile.in: Regenerate.

2005-06-23  Ben Elliston  <[email protected]>

	* config/m68k-parse.h: Use ISO C90.
	* config/m68k-parse.y: Likewise.
	* config/tc-m68k.h: Likewise.

2005-06-20  H.J. Lu  <[email protected]>

	PR 1013
	* config/tc-i386.c (md_assemble): Don't call optimize_disp on
	movabs.
	(optimize_disp): Optimize only if possible. Don't use 64bit
	displacement on non-constants and do same on constants if
	possible.

2005-06-17  Jan Beulich  <[email protected]>

	* config/tc-i386.c (reloc): Also handle BFD_RELOC_64_PCREL.
	(tc_i386_fix_adjustable): Include BFD_RELOC_X86_64_GOTOFF64,
	BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64.
	(output_disp): Do GOTPC conversion also for BFD_RELOC_X86_64_32S
	and BFD_RELOC_32_PCREL. Use BFD_RELOC_X86_64_GOTPC32 instead of
	aborting.
	(output_imm): Do GOTPC conversion also for BFD_RELOC_X86_64_32S.
	Use BFD_RELOC_X86_64_GOTPC32 instead of aborting.
	(tc_gen_reloc): Do GOTPC conversion also for BFD_RELOC_32_PCREL.
	Use BFD_RELOC_X86_64_GOTPC32 instead of aborting. Also handle
	BFD_RELOC_X86_64_GOTOFF64, BFD_RELOC_X86_64_GOTPC32,
	BFD_RELOC_X86_64_DTPOFF64, and BFD_RELOC_X86_64_TPOFF64. Also
	convert 8-byte pc-relative relocations.
	(lex_got): Use BFD_RELOC_X86_64_GOTOFF64 for 64-bit @gotoff.
	(i386_validate_fix): Likewise.
	(x86_cons): Also handle quad values in 64-bit mode.
	(i386_displacement): Also handle BFD_RELOC_X86_64_GOTOFF64.
	(md_apply_fix): Include BFD_RELOC_X86_64_DTPOFF64 and
	BFD_RELOC_X86_64_TPOFF64 in the TLS check. Also convert BFD_RELOC_64
	to pc-relative variant. Also check for BFD_RELOC_64_PCREL.

2005-06-13  Zack Weinberg  <[email protected]>

	* config/tc-arm.c (find_real_start): Check S_IS_LOCAL on
	symbolP as well as for names with a leading dot.  Use ACONCAT.
	(md_apply_fix): For branch relocations, only replace value
	with fixP->fx_offset (under #ifdef OBJ_ELF) when !fixP->fx_done.
	(arm_force_relocation): Remove #ifdef OBJ_ELF case.
	* config/tc-arm.h (LOCAL_LABEL): Remove unnecessary parentheses.
	(LOCAL_LABEL_PREFIX): Don't define.

2005-06-10  Alan Modra  <[email protected]>

	* config/tc-hppa.c (pa_block): Allocate just one byte for the
	fill pattern.

2005-06-08  James E Wilson  <[email protected]>

	PR 994
	* config/tc-ia64.c (slot_index): Revert last change.  If first_frag
	is NULL, then emit a warning, and return the current index.

2005-06-08  Tomas Hurka  <[email protected]>

	PR 991
	* config/tc-m68k.c (m68k_ip): Test for insn compatiblity using a
	temporary copy of the operands array so that changes can be safely
	backed out if the insn does not match.
	(m68k_compare_opcode): Shortcut the test when the parameters are
	the same.  Return 1 if the names match but the second opcode is
	further on in the array than the first.

2005-06-08  Nick Clifton  <[email protected]>

	PR 994
	* config/tc-ia64.c (slot_index): Check for a NULL first_frag.

2005-06-08  Kazuhiro Inaoka <[email protected]>

	* config/tc-m32r.c (use_parallel): Change default value from 1 to 0.

2005-06-07  Aldy Hernandez  <[email protected]>
	    Michael Snyder  <[email protected]>
	    Stan Cox  <[email protected]>

	* configure.in: Add ms1 case.

	* configure: Regenerate.

	* configure.tgt: Add ms1 case.

2005-06-07  Bob Wilson  <[email protected]>

	* config/tc-xtensa.h (resource_table): Change units to unsigned chars.
	* config/tc-xtensa.c (new_resource_table): Likewise.
	(resize_resource_table): Likewise.
	(release_resources): Fix assertion for unsigned values.

2005-06-07  Zack Weinberg  <[email protected]>

	* cgen.c, cgen.h, tc.h, write.c, config/obj-coff.c
	* config/tc-a29k.c, config/tc-alpha.c, config/tc-alpha.h
	* config/tc-arc.c, config/tc-arc.h, config/tc-arm.c
	* config/tc-arm.h, config/tc-avr.c, config/tc-avr.h
	* config/tc-cris.c, config/tc-crx.c, config/tc-d10v.c
	* config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h
	* config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.h
	* config/tc-frv.c, config/tc-frv.h, config/tc-h8300.c
	* config/tc-h8500.c, config/tc-hppa.c, config/tc-hppa.h
	* config/tc-i370.c, config/tc-i370.h, config/tc-i386.c
	* config/tc-i386.h, config/tc-i860.c, config/tc-i860.h
	* config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c
	* config/tc-ip2k.c, config/tc-ip2k.h, config/tc-iq2000.c
	* config/tc-iq2000.h, config/tc-m32r.c, config/tc-m32r.h
	* config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c
	* config/tc-m68k.h, config/tc-m88k.c, config/tc-maxq.c
	* config/tc-mcore.c, config/tc-mcore.h, config/tc-mips.c
	* config/tc-mips.h, config/tc-mmix.c, config/tc-mn10200.c
	* config/tc-mn10300.c, config/tc-msp430.c, config/tc-ns32k.c
	* config/tc-openrisc.h, config/tc-or32.c, config/tc-or32.h
	* config/tc-pdp11.c, config/tc-pj.c, config/tc-pj.h
	* config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c
	* config/tc-s390.h, config/tc-sh64.c, config/tc-sh.c
	* config/tc-sh.h, config/tc-sparc.c, config/tc-sparc.h
	* config/tc-tahoe.c, config/tc-tic30.c, config/tc-tic4x.c
	* config/tc-tic54x.c, config/tc-tic80.c, config/tc-v850.c
	* config/tc-v850.h, config/tc-vax.c, config/tc-vax.h
	* config/tc-w65.c, config/tc-xstormy16.c, config/tc-xstormy16.h
	* config/tc-xtensa.c, config/tc-z8k.c:
	Replace all instances of the string "_apply_fix3" with
	"_apply_fix".
	* po/POTFILES.in, po/gas.pot: Regenerate.

2005-06-08  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am".
	(POTFILES): Remove GAS_CFILES.
	* Makefile.in: Regenerate.

2005-06-07  David Ung  <[email protected]>

	* config/tc-mips.c (mips_cpu_info_table): Add cpu names m4k, 24k,
	24kc, 24kf and 24kfx under MIPS32 release 2.

2005-06-04  Nick Clifton  <[email protected]>

	* config/tc-arm.c (CE, C3, CM, UE, UF): Redefine without reference
	to their Thumb-enabled equivalents.

2005-06-01  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (load_register): Add leading "0x" to the
	output of sprintf_vma().
	(macro): Likewise.

2005-06-01  Nick Clifton  <[email protected]>

	* config/tc-arm.c (TxCE, TxC3, TxCM, TUE, TUF): Remove redundant
	test for the presence of thumb version of the parsing functions
	since they must always exist and the test generates a compile time
	warning message.

2005-05-31  Richard Henderson  <[email protected]>

	* config/tc-alpha.c (O_lituse_jsrdirect): New.
	(alpha_reloc_op): Add it.
	(debug_exp): Handle it.
	(DUMMY_RELOC_LITUSE_JSRDIRECT): New.
	(emit_insn): Handle it.
	* doc/c-alpha.texi (Alpha-Relocs): Document lituse_jsrdirect.

2005-05-31  Christian Groessler  <[email protected]>

	* write.c (dump_section_relocs): Convert to ISO-C.
	(write_relocs): Avoid signed/unsigned and fprintf argument
	warnings in debug code.

2005-05-26  Zack Weinberg  <[email protected]>

	* config/tc-arm.h (TC_FIX_TYPE): Change to int.
	(TC_INIT_FIX_DATA): Initialize to 0, not NULL.
	* config/tc-arm.c (fix_new_arm): Remove now-unnecessary cast.
	(md_apply_fix3): Delete fix_is_thumb variable; refer to
	fixP->tc_fix_data directly in the sole place it was used.
	Explicitly truncate value, *valP, fixP->fx_addnumber, and
	fixP->fx_offset to 32 bits, for consistent behavior between 32-
	and 64-bit hosts.

2005-05-27  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (struct proc_pending): New.
	(unwind): Replace proc_start with proc_pending.
	(unwind_diagnostic): Check unwind.proc_pending.sym.
	(dot_proc): Replace unwind.proc_start with unwind.proc_pending.sym.
	Check if previous proc not closed. Record all entry points.
	(dot_endp): Replace unwind.proc_start with unwind.proc_pending.sym.
	Set symbol sizes for entry points recorded in dot_proc. Check
	arguments for consistency with respective .proc's.
	(md_assemble): Replace unwind.proc_start with
	unwind.proc_pending.sym.

2005-05-27  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Restrict scope of ptr, end_ptr,
	and last_ptr. Check all in-use slots for first one with non-NULL
	unwind_record. Don't reload end_ptr before second update round.

2005-05-26  James E Wilson  <[email protected]>

	* config/tc-ia64.c (extra_goodness): Update comment.
	(md_begin): Add debugging code to print best_template table.

2005-05-25  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (md_begin): Don't try to match slot 2 of an MLX
	template.

2005-05-25  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (ia64_gen_real_reloc_type): Also handle
	BFD_RELOC_UNUSED when determining the width of the reloc.

2005-05-25  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_endp): Clear out all three pointers in unwind
	section entry.

2005-05-25  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_radix): Rewrite.

2005-05-25  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (struct unw_rec_list): Remove next_slot_number
	and next_slot_frag.
	(alloc_record): Remove references to next_slot_number and
	next_slot_frag.
	(emit_one_bundle): Likewise.

2005-05-22  Nick Clifton  <[email protected]>

	* config/tc-v850.c (md_apply_fix3): Pass the address of the
	message buffer when invoking the insert function.

2005-05-21  John David Anglin  <[email protected]>

	* config/tc-hppa.c (pa_ip): Promote architecture from PA 1.0 to 1.1
	only if an instruction match is found.

2005-05-20  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xg_assemble_vliw_tokens): Change subtraction
	to addition in argument to xtensa_dwarf2_emit_insn.

2005-05-19  Zack Weinberg  <[email protected]>

	* Makefile.am: Have 'all' depend on 'info'.
	* Makefile.in: Regenerate.

2005-05-19  Alan Modra  <[email protected]>

	* config/tc-ppc.c (ppc_force_relocation): Add BFD_RELOC_24_PLT_PCREL.

2005-05-19  Anton Blanchard  <[email protected]>

	* config/tc-ppc.c (parse_cpu): Handle "-mpower5".
	(md_show_usage): Document it.
	(ppc_setup_opcodes): Insert POWER5 mnemonics.
	* doc/c-ppc.texi (PowerPC-Opts): Document "-mpower5".

2005-05-19  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_endp): Don't use global symbol for unwind
	relocations in unwind section.

2005-05-18  Nick Clifton  <[email protected]>

	* config/tc-v850.c (md_apply_fix3): Only use the insertion routine
	if one exists.  Ignore any error messages it may produce, just
	allow it to perform the insertion.

2005-05-17  Zack Weinberg  <[email protected]>

	* hash.c (hash_lookup): Add len parameter.  All callers changed.
	(hash_find_n): New interface.
	* hash.h: Prototype hash_find_n.
	* sb.c: Include as.h.
	(scrub_from_sb, sb_to_scrub, scrub_position): New statics.
	(sb_scrub_and_add_sb): New interface.
	* sb.h: Prototype sb_scrub_and_add_sb.
	* input-scrub.c (input_scrub_include_sb): Use sb_scrub_and_add_sb.

	* config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Remove
	reference to BFD_RELOC_ARM_GOT12 which is never generated.
	* config/tc-arm.c: Rewrite, adding Thumb-2 support.

2005-05-17  Daniel Jacobowitz  <[email protected]>

	* doc/Makefile.am (gasver.texi): Don't use $<.
	* doc/Makefile.in: Regenerated.

2005-05-17  Nick Clifton  <[email protected]>

	PR 876
	* symbols.c (resolve_symbol_value): Do not move symbols whose
	value expression has not been resolved or finalized into the
	absolute section as this will confuse other parts of the assembler
	into thinking that their value is zero.

2005-05-17  Jan Beulich  <[email protected]>

	* read.c (_find_end_of_line): New.
	(find_end_of_line): New.
	(HANDLE_CONDITIONAL_ASSEMBLY): Use it.
	(read_a_source_file): Use it.
	(s_globl): Use it.
	(s_macro): Use it.
	(get_line_sb): Use it.
	(s_errwarn): Replace discard_rest_of_line by ignore_rest_of_line.
	(s_comm_internal): Likewise.
	(s_lsym): Likewise.
	(s_macro): Likewise.
	(s_ignore): Use ignore_rest_of_line.
	* read.h (find_end_of_line): Prototype.
	(discard_rest_of_line): Remove prototype. #define to
	ignore_rest_of_line.

2005-05-17  Nick Clifton  <[email protected]>

	* config/tc-v850,h (TC_FIX_TYPE): Define.
	(TC_INIT_FIX_TYPE): Define.
	* config/tc-v850.c (md_assemble): When creating a fix record the
	operand in the tc_fix_data field.
	(md_apply_fix3): When applying a resolved fix use the operand's
	insertion procedure to store the value, if the operand has been
	recorded.

2005-05-15  Daniel Jacobowitz  <[email protected]>

	* Makefile.am (m68k-parse.c, itbl-parse.c): Update ylwrap
	invocation.
	* Makefile.in: Regenerated.

2005-05-13  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_insnbuf_set_operand): Clarify error
	message.
	(xtensa_mark_zcl_first_insns): Fix incorrect nesting of conditional
	for handling RELAX_CHECK_ALIGN_NEXT_OPCODE.

2005-05-11  Alan Modra  <[email protected]>

	* config/tc-ppc.c (md_apply_fix3): Allow pcrel forms of BFD_RELOC_16,
	BFD_RELOC_LO16, BFD_RELOC_HI16 and BFD_RELOC_HI16_S.

2005-05-10  Michael Matz  <[email protected]>

	* frags.c (frag_grow): Don't be too greedy in allocating memory.

	* config/tc-hppa.c (pa_block): Check arguments to .block[z].

2005-05-10  Hans-Peter Nilsson  <[email protected]>

	PR binutils/886
	* config/tc-mmix.c (mmix_handle_mmixal): Rearrange slightly.
	Handle label-without-colon before ordinary dot-pseudo as an
	ordinary label.  Don't leak memory for label-without-colon alone
	on a line.  Don't mmixal-munge operands for dot-pseudos.

2005-05-10  Jan Beulich  <[email protected]>

	* macro.c (get_any_string): Remove the two last parameters. Replace
	references to the former expand parameter by using macro_alternate.
	Simplify loop condition for checking for end-of-string.
	(get_string): Remove redunant call to sb_skip_white.
	(do_formals): Remove two last arguments to get_any_string.
	(macro_expand): Likewise.
	(expand_irp): Likewise.

2005-05-10  Jan Beulich  <[email protected]>

	* read.c (s_macro): Move local variable 'local' to smaller scope.
	Call sb_kill on it when done.

2005-05-09  Jan Beulich  <[email protected]>

	* config/tc-i386.c (optimize_disp): Discard displacement entirely
	when zero and not required by encoding constraints.

2005-05-09  H.J. Lu  <[email protected]>

	PR 936
	* config/tc-sh64.c (sh64_fake_label): New.

	* config/tc-sh64.h (TC_FAKE_LABEL): New.

	* doc/internals.texi (TC_FAKE_LABEL): Document.

	* write.c (TC_FAKE_LABEL): New.
	(adjust_reloc_syms): Use it.
	(write_object_file): Likewise.

2005-05-09  Jan Beulich  <[email protected]>

	* config/tc-i386.c (parse_insn): Disallow use of prefix separator
	and comma in Intel mode.

2005-05-09  Jan Beulich  <[email protected]>

	* config/tc-i386.c (tc_x86_regname_to_dw2regnum): Correct 64-bit mode
	names to match ABI. Add more registers for 32-bit and 64-bit modes.
	Make name array static and const. Adjust lookup to account for NULL
	entries (standing for unused register numbers).

2005-05-09  Jan Beulich  <[email protected]>

	* config/tc-i386.c (parse_insn): Consider all matching instructions
	when checking for string instruction after string-only prefix.

2005-05-07  H.J. Lu  <[email protected]>

	PR 940
	* config/tc-ia64.c (start_unwind_section): Properly check
	comdat group with SHF_GROUP.

2005-05-06  Bob Wilson  <[email protected]>

	* doc/c-xtensa.texi (Literal Directive): Spelling correction.

2005-05-06  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c: Remove excess whitespace.
	* config/tc-xtensa.h: Likewise.
	* config/xtensa-istack.h: Likewise.
	* config/xtensa-relax.c: Likewise.
	* config/xtensa-relax.h: Likewise.

2005-05-06  Nick Clifton  <[email protected]>

	* sb.h: Fix formatting of comments.
	* sb.c: Fix formatting of comments.

2005-05-06  Jan Beulich  <[email protected]>

	* sb.h (sb_add_buffer): Reintroduce.
	* sb.c (sb_add_buffer): Likewise.

2005-05-06  Jan Beulich  <[email protected]>

	* macro.c (new_formal, del_formal): New.
	(do_formals): Use new_formal. Check for and parse qualifier. Warn if
	required argument has default value. Stop looking for more formal
	when there was a vararg one.
	(macro_expand_body): Use new_formal and del_formal.
	(macro_expand): Likewise. Initialize local variable err. Don't
	return immediately when encountering an error. Warn when keyword
	argument already had a value assigned. Eliminate duplicate clearing
	of argument value. When current positional argument matches parameter
	of vararg type, assign to it all the remaining arguments. Issue error
	when required parameter does not have value.
	(free_macro): Use del_formal.
	(expand_irp): Initialize formal type. Free buffers associated with
	formal prior to returning.
	* macro.h (struct formal_struct): Add new field 'type' with new
	enumeration type 'formal_type'.
	* doc/as.texinfo: Document macro parameter qualifiers.
	* NEWS: Mention new functionality.

2005-05-06  Jan Beulich  <[email protected]>

	* cond.c (s_ifb): New.
	* read.c (potable): Add s_ifb as handler for .ifb and .ifnb.
	* read.h (s_ifb): Prototype.
	* doc/as.texinfo: Document .ifb and .ifnb.

2005-05-05  Steve Ellcey  <[email protected]>

	* config/tc-ia64.c (MIN): Undef.

2005-05-05  Paul Brook  <[email protected]>

	* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.

2005-05-05  Matt Thomas <[email protected]>

	* config/tc-vax.c (md_assemble): Don't assume a valueT is 4
	bytes.

2005-05-05  Nick Clifton  <[email protected]>

	* Update the address and phone number of the FSF organization in
	the GPL notices in the following files:
	COPYING, app.c, as.c, as.h, asintl.h, atof-generic.c, bignum.h,
	bit_fix.h, cgen.c, cgen.h, cond.c, debug.c, depend.c, dw2gencfi.c,
	dw2gencfi.h, dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c,
	emul-target.h, emul.h, expr.c, expr.h, flonum-copy.c,
	flonum-konst.c, flonum.h, frags.c, frags.h, hash.c, hash.h,
	input-file.c, input-file.h, input-scrub.c, itbl-lex.h, itbl-lex.l,
	itbl-ops.c, itbl-ops.h, itbl-parse.y, listing.c, listing.h,
	literal.c, macro.c, macro.h, messages.c, obj.h, output-file.c,
	output-file.h, read.c, read.h, sb.c, sb.h, stabs.c,
	struc-symbol.h, subsegs.c, subsegs.h, symbols.c, symbols.h, tc.h,
	write.c, write.h, config/aout_gnu.h, config/atof-ieee.c,
	config/atof-vax.c, config/itbl-mips.h, config/m68k-parse.h,
	config/m68k-parse.y, config/m88k-opcode.h, config/obj-aout.c,
	config/obj-aout.h, config/obj-bout.c, config/obj-bout.h,
	config/obj-coff.c, config/obj-coff.h, config/obj-ecoff.c,
	config/obj-ecoff.h, config/obj-elf.c, config/obj-elf.h,
	config/obj-evax.c, config/obj-evax.h, config/obj-hp300.c,
	config/obj-hp300.h, config/obj-ieee.c, config/obj-ieee.h,
	config/obj-multi.h, config/obj-som.c, config/obj-som.h,
	config/tc-a29k.c, config/tc-a29k.h, config/tc-alpha.c,
	config/tc-alpha.h, config/tc-arc.c, config/tc-arc.h,
	config/tc-arm.h, config/tc-avr.c, config/tc-avr.h,
	config/tc-cris.c, config/tc-cris.h, config/tc-crx.c,
	config/tc-crx.h, config/tc-d10v.c, config/tc-d10v.h,
	config/tc-d30v.c, config/tc-d30v.h, config/tc-dlx.c,
	config/tc-dlx.h, config/tc-fr30.c, config/tc-fr30.h,
	config/tc-frv.c, config/tc-frv.h, config/tc-generic.c,
	config/tc-generic.h, config/tc-h8300.c, config/tc-h8300.h,
	config/tc-h8500.c, config/tc-h8500.h, config/tc-hppa.c,
	config/tc-hppa.h, config/tc-i370.c, config/tc-i370.h,
	config/tc-i386.c, config/tc-i386.h, config/tc-i860.c,
	config/tc-i860.h, config/tc-i960.c, config/tc-i960.h,
	config/tc-ia64.c, config/tc-ia64.h, config/tc-ip2k.c,
	config/tc-ip2k.h, config/tc-iq2000.c, config/tc-iq2000.h,
	config/tc-m32r.c, config/tc-m32r.h, config/tc-m68851.h,
	config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c,
	config/tc-m68k.h, config/tc-m88k.c, config/tc-m88k.h,
	config/tc-maxq.c, config/tc-maxq.h, config/tc-mcore.c,
	config/tc-mcore.h, config/tc-mips.c, config/tc-mips.h,
	config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c,
	config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h,
	config/tc-msp430.c, config/tc-msp430.h, config/tc-ns32k.c,
	config/tc-ns32k.h, config/tc-openrisc.c, config/tc-openrisc.h,
	config/tc-or32.c, config/tc-or32.h, config/tc-pdp11.c,
	config/tc-pdp11.h, config/tc-pj.c, config/tc-pj.h,
	config/tc-ppc.c, config/tc-ppc.h, config/tc-s390.c,
	config/tc-s390.h, config/tc-sh.c, config/tc-sh.h,
	config/tc-sh64.c, config/tc-sh64.h, config/tc-sparc.c,
	config/tc-sparc.h, config/tc-tahoe.c, config/tc-tahoe.h,
	config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c,
	config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h,
	config/tc-tic80.c, config/tc-tic80.h, config/tc-v850.c,
	config/tc-v850.h, config/tc-vax.c, config/tc-vax.h,
	config/tc-w65.c, config/tc-w65.h, config/tc-xstormy16.c,
	config/tc-xstormy16.h, config/tc-xtensa.c, config/tc-xtensa.h,
	config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h,
	config/te-freebsd.h, config/te-hp300.h, config/te-hppa.h,
	config/te-ic960.h, config/te-irix.h, config/te-nbsd.h,
	config/te-netware.h, config/te-sparcaout.h, config/te-sun3.h,
	config/te-tmips.h, config/te-vxworks.h, config/vax-inst.h,
	config/xtensa-istack.h, config/xtensa-relax.c,
	config/xtensa-relax.h, doc/fdl.texi

2005-05-05  Nick Clifton  <[email protected]>

	* config/tc-arm.c (arm_opts): Make -mlittle-endian switch set
	the target_big_endian variable to false.

2005-05-04  Alan Modra  <[email protected]>

	* config/obj-ecoff.c (ecoff_frob_file_before_fix): Correct section
	list traversal.  Use bfd_section_list_prepend.
	* config/tc-mmix.c (mmix_frob_file): Don't needlessly iterate
	over the section list.
	* config/tc-xtensa.c (xtensa_remove_section): Delete.
	(xtensa_insert_section): Delete.
	(xtensa_move_seg_list_to_beginning): Use bfd_section_list_remove
	and bfd_section_list_prepend.
	(xtensa_reorder_seg_list): Use bfd_section_list_remove and
	bfd_section_list_insert_after.

2005-05-03  Nick Clifton  <[email protected]>

	* config/obj-ecoff.c (ecoff_frob_file_before_fix): Fix invocations
	of bfd_section_list... macros.
	* config/tc-mmix.c (mmix_frob_file): Likewise.
	* config/tc-xtensa.c (xtensa_remove_section): Likewise.
	(xtensa_insert_section): Likewise.

	* macro.c (macro_hash): Remove static.
	* macro.h (macro_hash): Provide an external declaration.

2005-05-02  H.J. Lu  <[email protected]>

	* write.c (write_object_file): Use bfd_section_double_list_remove
	to remove sections.

2005-05-02  Daniel Jacobowitz  <[email protected]>

	* doc/Makefile.am (gasver.texi): Correct quoting.
	* doc/Makefile.in: Regenerated.

2005-04-29  Ralf Corsepius <[email protected]>

	* configure.tgt: Add h8300*-*-rtemscoff.
	Switch h8300*-*-rtems* to elf.

2005-04-29  H.J. Lu  <[email protected]>

	* hash.c: Undo the last change.
	* hash.h: Likewise.

2005-04-29  Daniel Jacobowitz  <[email protected]>

	* doc/Makefile.am (gasver.texi): Depend on bfd/configure instead
	of Makefile.
	(DISTCLEANFILES): Remove.
	(MAINTAINERCLEANFILES): Add asconfig.texi.
	* aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.

2005-04-29  Ben Elliston  <[email protected]>

	* Makefile.am (GAS_CFILES): Remove bignum-copy.c.
	(GENERIC_OBJS): Likewise, remove bignum-copy.o.
	(bignum-copy.o): Remove.
	* Makefile.in: Regenerate.
	* makefile.vms (OBJS): Remove bignum-copy.obj.
	* symbols.h (local_symbol_make): Remove declaration.
	(verify_symbol_chain_2): Likewise.
	* symbols.c (local_symbol_make): Make static.
	(max_indent_level): Likewise.
	(verify_symbol_chain_2): Remove.
	* macro.c (macro_hash): Make static.
	* messages.c (fprint_value): Remove.
	* read.h (get_absolute_expr): Remove.
	(emit_leb128_expr): Likewise.
	(do_s_func): Likewise.
	* read.c (do_s_func): Make static.
	(emit_leb128_expr): Likewise.
	(get_absolute_expr): Likewise.
	* as.h (as_howmuch): Remove declaration.
	(fprint_value): Likewise.
	* as.c (myname): Make static.
	* input-scrub.c (as_howmuch): Remove.
	(as_1_char): Likewise.
	* input-file.h (input_file_is_open): Remove.
	* input-file.c (input_file_is_open): Likewise.
	* expr.h (expr_build_unary): Remove declaration.
	(expr_build_binary): Likewise.
	* expr.c (expr_build_unary): Remove.
	(expr_build_binary): Likewise.
	* hash.h (hash_replace): Remove declaration.
	(hash_delete): Likewise.
	* hash.c (hash_replace): Remove.
	(hash_delete): Likewise.
	* bignum-copy.c (bignum_copy): Move from here ..
	* config/tc-vax.c (bignum_copy): .. to here.
	* bignum.h (LOG_TO_BASE_2_OF_10): Remove.
	(bignum_copy): Remove extern declaration.
	* sb.h (string_count): Remove extern declaration.
	(sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
	(sb_name): Likewise.
	* sb.c (dsize): Replace preprocessor macro with static int.
	(string_count): Make static.
	(sb_build, sb_add_buffer, sb_print, sb_print_at): Likewise.
	(sb_name): Likewise.
	* config/obj-coff.c (dim_index): Make static.
	* config/tc-i386.c (GOT_symbol): Likewise.
	(output_invalid_buf): Likewise.
	* doc/internals.texi (Warning and error messages): Remove the
	prototype for fprint_value.

2005-04-27  Ben Elliston  <[email protected]>

	* link.cmd: Remove.

2005-04-26  H.J. Lu  <[email protected]>

	* config/obj-multi.h (FAKE_LABEL_NAME): Defined.

	* read.c (pseudo_set): Disallow symbol set to common symbol.

	PR 857
	* write.c (write_object_file): Report common symbol name when
	disallowing local symbol set to common symbol.
	(adjust_reloc_syms): Disallow local symbol set to undefined
	symbol.

2005-04-25  Jan Beulich  <[email protected]>

	* macro.c (macro_expand_body): Replace locals indicator parameters
	with actual macro_entry. New local variables macro_line and err.
	Don't return when encountering an error, just record the fact.
	Detect local symbol name colliding with parameter. Track line number
	inside of macro expansion.
	(do_formals): Move local variable name to wider scope. Check
	parameter of the same name doesn't already exist. In MRI mode, also
	check it doesn't collide with the argument count pseudo-parameter).
	(define_macro): Add file and line number parameters. Remove local
	variable namestr. New local variable error. Initialize macro_entry
	members file, line, and name. Don't return when encountering an
	error, just record the fact. Use %s in some diagnostics for read.c
	to insert the macro name. Free macro_entry on error.
	(macro_expand): Pass macro_entry to macro_epand_body. Don't return
	when encountering an error, just record the fact.
	(expand_irp): Don't return when encountering an error, just record
	the fact.
	* macro.h (macro_struct): New members name, file, and line.
	(define_macro): Add file and line number parameters.
	* read.c (s_macro): Pass file and line to define_macro. Tag warning
	regarding pseudo-op redefinition with the file/line that macro
	definition started at.

2005-04-22  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (LOOKAHEAD_ALIGNER): Delete macro.
	(future_alignment_required): Remove ifdefs that use it.

2005-04-22  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xg_get_build_instr_size): Remove.
	(xg_is_narrow_insn, xg_expand_narrow): Remove.  Merge into...
	(xg_is_single_relaxable_insn): ...here.  Add "targ" and "narrow_only"
	parameters.
	(xg_assembly_relax, xg_find_narrowest_format, relaxation_requirements,
	convert_frag_narrow): Use new version of xg_is_single_relaxable_insn.

2005-04-21  Christian Groessler  <[email protected]>

	* config/tc-z8k.c (md_assemble): Fix buffer overrun in operand[]
	array.

2005-04-20  H.J. Lu  <[email protected]>

	* config/obj-aout.h (S_IS_EXTERN): Removed.
	* config/obj-bout.h (S_IS_EXTERN): Likewise.
	* config/obj-coff.h (S_IS_EXTERN): Likewise.
	* symbols.c (S_IS_EXTERN): Likewise.
	* symbols.h (S_IS_EXTERN): Likewise.

	* config/tc-alpha.c (tc_gen_reloc): Replace S_IS_EXTERN with
	S_IS_EXTERNAL.
	* config/tc-d10v.c (md_apply_fix3): Likewise.
	* config/tc-ia64.c (ia64_fix_adjustable): Likewise.
	* config/tc-iq2000.c (iq2000_fix_adjustable): Likewise.
	* config/tc-m32r.c (m32r_fix_adjustable): Likewise.
	* config/tc-mmix.c (mmix_adjust_symtab): Likewise.
	* config/tc-sh64.c (shmedia_frob_file_before_adjust): Likewise.
	(shmedia_md_convert_frag): Likewise.
	* symbols.c (print_symbol_value_1): Likewise.
	* write.c (write_object_file): Likewise.

2005-04-20  Nick Clifton  <[email protected]>

	* config/tc-xtensa.c (get_aligned_diff): Change type of
	branch_align to offsetT so that its signedness matches that of
	target_size.

	* config/tc-mips.c (macro): Use sprintf_vma to convert a > 32 bit
	number into a readable string.
	(load_register): Likewise.

2005-04-20  Andreas Schwab  <[email protected]>

	* config/tc-ia64.c (specify_resource): Initialize all of tmpl.

2005-04-19  David S. Miller  <[email protected]>

	* config/tc-sparc.c (md_assemble): If sparc_ip gives us a
	NULL insn, exit early.  Remove now spurious NULL checks.
	(sparc_ip): Use as_bad for unknown opcode errors, set *pinsn
	to NULL and exit.

2005-04-19  Jan Beulich  <[email protected]>

	* symbols.h (symbol_find_base): Remove prototype.
	* symbols.c (save_symbol_name): Remove code section conditional upon
	STRIP_UNDERSCORE.
	(symbol_find): Remove.
	(symbol_find_base): Rename to symbol_find.
	* subsegs.c (section_symbol): Replace use of symbol_find_base with
	symbol_find.
	* config/obj-coff.c (tag_insert): Remove code section conditional
	upon STRIP_UNDERSCORE.
	(obj_coff_def): Likewise.
	(obj_coff_endef): Replace use of symbol_find_base with symbol_find.
	(coff_frob_symbol): Likewise.
	(yank_symbols): Likewise.
	(c_section_symbol): Likewise.
	* config/obj-coff.h (DO_NOT_STRIP): Remove.
	* config/tc-arm.c (symbol_locate): Remove code section conditional
	upon STRIP_UNDERSCORE.
	* config/tc-h8300.h (DO_NOT_STRIP): Remove.
	* config/tc-h8500.h (DO_NOT_STRIP): Remove.
	* config/tc-sh.h (DO_NOT_STRIP): Remove.
	* config/tc-w65.h (DO_NOT_STRIP): Remove.
	* config/tc-z8k.h (DO_NOT_STRIP): Remove.

2005-04-19  Andreas Schwab  <[email protected]>

	* config/tc-ia64.c (md_assemble): Fix error message for wrong
	access to application registers.

2005-04-19  Jan Beulich  <[email protected]>

	* config/te-sysv32.h: Remove.
	* Makefile.am (TARG_ENV_HFILES): Remove reference to
	config/te-sysv32.h.
	* Makefile.in (TARG_ENV_HFILES): Likewise.

2005-04-19  Jan Beulich  <[email protected]>

	PR/847
	* config/tc-ia64.c (ia64_canonicalize_symbol_name): Re-allow zero-
	length symbols.

2005-04-18  Mark Kettenis  <[email protected]>

	* config/tc-i386.c (md_begin): Allow hyphens in mnemonics.

2005-04-18  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (normalize_constant_expr): Don't check for
	HAVE_32BIT_GPRS.
	(check_absolute_expr): Only call normalize_constant_expr() if
	HAVE_32BIT_GPRS.
	(mips_ip): Likewise.

	* config/tc-mips.c (check_absolute_expr): Fix formatting.

2005-04-18  Jan Beulich  <[email protected]>

	* macro.c (free_token): New, freeing all the memory associated with a
	macro.
	(do_formals): Move initializers to ...
	(define_macro): ... here.
	(delete_macro): Convert passed in name to lower case. Warn when
	purging macro that doesn't exist. Use hash_jam instead of hash_delete.

2005-04-15  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (normalize_constant_expr): Fix formatting.

2005-04-15  Jan Beulich  <[email protected]>

	* config/obj-elf.c (obj_elf_struct): New.
	(elf_pseudo_table). Use it for .offset and .struct.

2005-04-14  Bob Wilson  <[email protected]>
	    Sterling Augustine  <[email protected]>

	* config/tc-xtensa.c (get_aligned_diff): Handle target_size larger
	than the section alignment.

2005-04-14  Bob Wilson  <[email protected]>
	    H.J. Lu  <[email protected]>

	* config/tc-xtensa.h (struct xtensa_frag_type): Add lit_frchain field.
	* config/tc-xtensa.c (xg_translate_sysreg_op,
	xtensa_translate_old_userregs_ops,
	xtensa_find_unaligned_branch_targets,
	xtensa_find_unaligned_loops, xtensa_fix_close_loop_end_frags,
	relax_frag_add_nop): Support 64-bit host.
	(xtensa_mark_literal_pool_location, xtensa_move_literals): Use
	tc_frag_data lit_frchain and lit_seg fields instead of fr_var.

2005-04-14  Mark Kettenis  <[email protected]>

	* configure.tgt: Add support for OpenBSD/sparc ELF.

	* configure.tgt: Set emulation for mips-*-openbsd*.
	Remove broken mips-dec-openbsd* config.
	* configure.in: Set default ABI for mips64-*-openbsd*.
	* configure: Regenerate.

2005-04-14  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (macro) [ldd_std]: Don't attempt the GP
	optimization for constant addresses.

2005-04-14  Nick Clifton  <[email protected]>

	* as.c (main): Move parse_args before symbol_begin and frag_init
	so that the hash table size can be set before it is used.
	* hash.c: Use an unsigned long type for the size of the hash
	tables.
	* hash.h (set_gas_hash_table_size): Update the prototype.

2005-04-14  Alan Modra  <[email protected]>

	* Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
	* acinclude.m4: Include ../bfd/warning.m4.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.

2005-04-13  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (IS_ZEXT_32BIT_NUM): New macro.
	(normalize_address_expr): New function to sign-extend address
	offsets that fit into 32 bits in 32-bit mode.
	(macro_build_ldst_constoffset): Use normalize_address_expr()
	instead of a handcoded sequence.
	(load_register): Likewise.  Report oversized numbers in a useful
	way.
	(macro) [ld_st, ldd_std]: Reject all oversized offsets, not only
	for constant addresses.  Report oversized numbers in a useful way.
	(mips_ip): Use normalize_address_expr() for addresses.

2005-04-12  Mark Kettenis  <[email protected]>

	* config/tc-i386.c (output_insn): Handle VIA PadLock instructions
	similar to other instructions now that they're marked as ImmExt.

2005-04-12  Nick Clifton  <[email protected]>

	* hash.c (DEFAULT_SIZE): Delete.  Replace with:
	(gas_hash_table_size): New static variable.
	(set_gas_hash_table_size): New function:  Records a requested size
	for the hash tables.
	(get_gas_hash_table_size): New function: Return a prime number
	near the requested size of the hash table.
	(hash_new): Use get_gas_hash_table_size.
	* hash.h: Add a prototype for set_gas_hash_table_size.
	* as.c (show_usage): Add description of new switches: --hash-size
	and --reduce-memory-overheads.
	(option_values): Add OPTION_HASH_TABLE_SIZE and
	OPTION_REDUCE_MEMORY_OVERHEADS.
	(std_longpopts): Add entries for the new options.
	(parse_args): Handle the new options.
	* Makefile.am: Add a dependency of as.c on hash.h.
	* Makefile.in: Regenerate.
	* doc/as.texinfo: Document the new switches.
	* NEWS: Mention the new switches.

2005-04-12  Nick Clifton  <[email protected]>

	PR gas/818
	* config/tc-hppa.c (pre_defined_registers): Fix %farg[0-3]
	synonyms.

2005-04-12  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2005-04-11  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (check_t1_t2_reads_and_writes): Fix typo.

2005-04-11  Mark Kettenis  <[email protected]>

	* configure.tgt (generic_target): Add support for OpenBSD/i386 ELF.

2005-04-11  Jan Beulich  <[email protected]>

	* NEWS: Mention these changes and their effects.
	* macro.c (get_token): Use is_name_beginner/is_part_of_name/
	is_name_ender.
	(check_macro): Likewise.
	(buffer_and_nest): Likewise. Permit multiple labels. Don't discard
	labels together with the closing pseudo-op.
	(macro_expand_body): Adjust comment. Range-check input before use.
	Adjust mis-spelled diagnostic. Use is_name_beginner.
	* read.c (try_macro): New.
	(read_a_source_file): New static variable last_eol. Don't list
	macro expansion lines more than once. Call try_macro.
	(s_macro): Set section of line_label to absolute instead of undefined.
	* doc/as.texinfo: Add information on the caveats of these changes.

2005-04-11  Alan Modra  <[email protected]>

	* symbols.c (symbol_X_add_number): Change return type to "offsetT *".
	* symbols.h (symbol_X_add_number): Update prototype.

2005-04-10  Eric Christopher  <[email protected]>

	* symbols.c (symbol_X_add_number): Fix warning.

2005-04-10  H.J. Lu  <[email protected]>

	* config/tc-m68k.c (md_begin): Support 64bit host.
	(get_num): Support 64bit BFD on 32bit host.

2005-04-10  H.J. Lu  <[email protected]>

	* config/tc-mips.c (md_apply_fix3): Fix typos in BFD_RELOC_64.

2005-04-09  Alan Modra  <[email protected]>

	* read.c (assign_symbol): Remove const from parm.  Fix xcalloc
	call.  Don't do the COFF hacks for multi-emulation gas.  Move
	demand_empty_rest_of_line back to caller.
	(s_set, equals): demand_empty_rest_of_line here.

	PR gas/827
	* as.h (rs_dummy): Define.
	* symbols.c (symbol_X_add_number): New function.
	* symbols.h (symbol_X_add_number): Declare.
	* stabs.c (aout_process_stab): Tidy symbol frag setting.
	* read.c (assign_symbol): New function, split out from s_set.
	Use symbol_find_or_make.  Leave fr_type of dummy frag as rs_dummy.
	Fix COFF hacks for multi-emulation gas.
	(s_set): Call assign_symbol.  Remove "register" keyword.
	(set_zero_frag): New function.
	(pseudo_set): Always check for assignment to section syms.
	Always set segment and frag of symbol, and likewise extern for
	aout/bout.  Handle assignment of sym=sym+/-const specially.  Don't
	special case exp.X_add_number non-zero for O_symbol expressions.
	(equals): Use assign_symbol.

2005-04-08  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_create_xproperty_segments): Skip
	SEC_MERGE sections.

2005-04-06  H.J. Lu  <[email protected]>

	* config/tc-i386.c (tc_gen_reloc): Don't turn
	BFD_RELOC_X86_64_32S into BFD_RELOC_32.

2005-04-06  Nick Clifton  <[email protected]>

	* po/rw.po: New translation: Kinyarwanda
	* configure.in (ALL_LINGUAS): Add rw
	* configure: Regenerate.

2005-04-05  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (branch_align_power): New.
	(xtensa_find_unaligned_branch_targets, get_aligned_diff,
	future_alignment_required): Use branch_align_power to check section
	alignment as well as xtensa_fetch_width when aligning branch targets.

2005-04-05  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c: Warning fixes throughout.
	(xtensa_fetch_width): Change to unsigned.
	(assemble_nop, xtensa_find_unaligned_branch_targets,
	xtensa_find_unaligned_loops, xg_assemble_vliw_tokens,
	is_narrow_branch_guaranteed_in_range, xtensa_fix_close_loop_end_frags,
	min_bytes_to_other_loop_end, unrelaxed_frag_min_size,
	unrelaxed_frag_max_size, xtensa_fix_short_loop_frags,
	count_insns_to_loop_end, unrelaxed_frag_min_insn_count,
	get_text_align_max_fill_size, get_text_align_nop_count,
	get_text_align_nth_nop_size, get_noop_aligned_address,
	get_aligned_diff, convert_frag_align_next_opcode,
	convert_frag_immed_finish_loop, xtensa_create_property_segments,
	xtensa_create_xproperty_segments, xt_block_aligned_size): Clean up
	types, avoiding size_t and using offsetT and addressT appropriately.
	(get_text_align_power): Clean up types.  Avoid incorrect bound.
	(get_text_align_fill_size): Clean up types.  Restructure for clarity.

2005-04-04  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (start_unwind_section): Undo the change
	of 2004-08-18.
	(generate_unwind_image, dot_endp): Likewise.

2005-04-01 David Mosberger  <[email protected]>

	* config/tc-ia64.c (ia64_handle_align): Move le_nop and
	le_nop_stop arrays and initializers to file scope.
	(md_begin): When generating code for anything other than
	Itanium 1, use MMI instead of MFI NOP bundles as a filler.

2005-04-01  Jan Beulich  <[email protected]>

	* config/tc-i386.c (output_imm): Also set sign flag for 64-bit push
	immediates.

2005-04-01  Jan-Benedict Glaw  <[email protected]>

	* NEWS: Mention [fdgh]_floating.
	* config/atof-vax.c: Fix some whitespace.
	* config/tc-vax.c (md_pseudo_table): Add "[fdgh]_floating".

2005-04-01  Nick Clifton  <[email protected]>

	* configure.in: Add a check for <unistd.h> providing a prototype
	for getopt() which is compatible with the one in
	include/getopt.h.  If so then define HAVE_DECL_GETOPT.
	* configure: Regenerate.
	* config.in (HAVE_DECL_GETOPT): Add.

2005-04-01  Jan Beulich  <[email protected]>

	* config/tc-i386.c (s_bss): Call obj_elf_section_change_hook.

2005-04-01  Jan Beulich  <[email protected]>

	* config/tc-i386.c (md_apply_fix3): Also handle BFD_RELOC_X86_64_32S.
	(tc_gen_reloc): Handle BFD_RELOC_X86_64_32S in the default case.

2005-03-30  Julian Brown  <[email protected]>

	* config/tc-arm.c (arm_adjust_symtab): Rename
	bfd_elf32_is_arm_mapping_symbol_name to bfd_is_arm_mapping_symbol_name.

2005-03-30  Julian Brown  <[email protected]>

	* config/tc-arm.c (mapping_state): Change documentation in function
	comment to cross-reference spec instead. Change type of mapping symbols
	to BSF_NO_TYPE.
	(arm_adjust_symtab): Don't change type of mapping symbols here.

2005-03-30  Aaron W. LaFramboise  <[email protected]>

	* as.h [NEED_DECLARATION_FFS] (ffs): Prototype and alphabetize.
	* config.in: Regenerate.
	* configure: Regenerate.
	* configure.in: Check for ffs decl and alphabetize.

2005-03-29  Daniel Jacobowitz  <[email protected]>
	    Phil Blundell  <[email protected]>

	* config/tc-arm.c (arm_parse_reloc): Add TLS relocations.
	(md_apply_fix3): Mark TLS symbols.
	(tc_gen_reloc): Handle TLS relocations.
	(arm_fix_adjustable): Ignore TLS relocations.
	(s_arm_elf_cons): Support expressions after decorated symbols.

2005-03-29  Julian Brown  <[email protected]>

	* config/tc-arm.c (marked_pr_dependency): New bitmap, bit N indicates
	whether personality routine index N has been output for this section.
	(mapping_state): tc_segment_info_data now struct not enum.
	(arm_elf_change_section): Likewise, and marked_pr_dependency is now
	handled on section change.
	(create_unwind_entry): Previous code to output dependency removed.
	(s_arm_unwind_fnend): Output dependency if it hasn't been done already
	for this section.
	* config/tc-arm.h (TC_SEGMENT_INFO_TYPE): Redefined as struct
	arm_segment_info_type.
	(arm_segment_info_type): New struct.

2005-03-28  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (do_align_targets): Update comment.
	(xtensa_frob_label): Compute "freq" before possibly switching frags.
	Insert a LOOP_END frag before every loop target, and do not overload
	DESIRE_ALIGN_IF_TARGET frags with loop end information.
	(xg_assemble_vliw_tokens): Use do_align_targets.
	(xtensa_fix_target_frags): Remove code to convert a
	DESIRE_ALIGN_IF_TARGET frag to a LOOP_END frag when there is a
	negatable branch at the end of a loop.
	(frag_can_negate_branch): Delete.

2005-03-28  David Mosberger  <[email protected]>
	    H.J. Lu  <[email protected]>

	PR 803
	NEWS: Mention "-mtune=[itanium1|itanium2]".

	* config/tc-ia64.c (md): Add tune.
	(md_parse_option): Accepted "-mtune=[itanium1|itanium2]".
	(md_show_usage): Add "-mtune=[itanium1|itanium2]".
	(extra_goodness): Prefer M- and I-unit NOPs for itanium2. F and
	B unit NOPs are discouraged for McKinley-derived cores.
	(md_begin): Don't hardcode the "extra_goodness()" function in
	the comment...
	(ia64_init): Set md.tune to itanium2.

	* doc/as.texinfo: Add -mtune=[itanium1|itanium2]".
	* doc/c-ia64.texi: Likewise.

2005-03-27  Ian Lance Taylor  <[email protected]>

	* config/obj-coff.c (coff_frob_symbol): When crashing because of a
	bad C_EFCN symbol, print its name.

2005-03-25  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (use_longcalls): Delete.
	(xg_symbolic_immeds_fit): Check for direct calls and return TRUE if
	the use_longcalls flag is set.  Do this before checking the segment.
	(xg_expand_assembly_insn): Rearrange to use new do_expand flag.  Never
	expand direct calls at this point.
	(xtensa_set_frag_assembly_state): Set use_longcalls flag.
	(xtensa_find_unmarked_state_frags): Likewise.
	(md_assemble): Do not disable longcalls by setting is_specific_opcode.
	(xg_assemble_vliw_tokens): Switch frags when use_longcalls changes.
	(convert_frag_immed): Remove unnecessary check of is_specific_opcode.
	* config/tc-xtensa.h (xtensa_frag_type): Add use_longcalls flag.

2005-03-25  Hans-Peter Nilsson  <[email protected]>

	* config/tc-mmix.c, config/tc-mmix.h: Convert to ISO C90.

2005-03-25  Hans-Peter Nilsson  <[email protected]>

	* config/tc-cris.h: Convert to ISO C90.
	* config/tc-cris.c: Ditto.
	(md_estimate_size_before_relax): Remove obsolete comment for
	parameter "segment_type".
	(md_begin): Document reason for cast of hash_insert argument.
	(md_atof): Correct type of parameter "type".

2005-03-24  Nick Clifton  <[email protected]>

	* write.h (bit_fix_new): Remove redundant prototype.
	* config/atof-ieee.c: Convert to ISO-C90 and fix formatting.
	* config/obj-aout.c: Convert to ISO-C90 and fix formatting.
	* config/obj-aout.h: Convert to ISO-C90 and fix formatting.
	* config/obj-bout.c: Convert to ISO-C90 and fix formatting.
	* config/obj-bout.h: Convert to ISO-C90 and fix formatting.
	* config/obj-ecoff.c: Convert to ISO-C90 and fix formatting.
	* config/obj-ecoff.h: Convert to ISO-C90 and fix formatting.
	* config/obj-som.c: Convert to ISO-C90 and fix formatting.
	* config/obj-som.h: Convert to ISO-C90 and fix formatting.
	* config/tc-a29k.c: Convert to ISO-C90 and fix formatting.
	* config/tc-a29k.h: Convert to ISO-C90 and fix formatting.
	* config/tc-alpha.c: Convert to ISO-C90 and fix formatting.
	* config/tc-alpha.h: Convert to ISO-C90 and fix formatting.
	* config/tc-arc.c: Convert to ISO-C90 and fix formatting.
	* config/tc-arc.h: Convert to ISO-C90 and fix formatting.
	* config/tc-d10v.c: Convert to ISO-C90 and fix formatting.
	* config/tc-d10v.h: Convert to ISO-C90 and fix formatting.
	* config/tc-d30v.c: Convert to ISO-C90 and fix formatting.
	* config/tc-d30v.h: Convert to ISO-C90 and fix formatting.
	* config/tc-dlx.c: Convert to ISO-C90 and fix formatting.
	* config/tc-dlx.h: Convert to ISO-C90 and fix formatting.
	* config/tc-fr30.c: Convert to ISO-C90 and fix formatting.
	* config/tc-fr30.h: Convert to ISO-C90 and fix formatting.
	* config/tc-h8500.c: Convert to ISO-C90 and fix formatting.
	* config/tc-h8500.h: Convert to ISO-C90 and fix formatting.
	* config/tc-i370.c: Convert to ISO-C90 and fix formatting.
	* config/tc-i370.h: Convert to ISO-C90 and fix formatting.
	* config/tc-i960.c: Convert to ISO-C90 and fix formatting.
	* config/tc-ip2k.c: Convert to ISO-C90 and fix formatting.
	* config/tc-ip2k.h: Convert to ISO-C90 and fix formatting.
	* config/tc-m32r.c: Convert to ISO-C90 and fix formatting.
	* config/tc-m32r.h: Convert to ISO-C90 and fix formatting.
	* config/tc-m88k.c: Convert to ISO-C90 and fix formatting.
	* config/tc-m88k.h: Convert to ISO-C90 and fix formatting.
	* config/tc-mcore.c: Convert to ISO-C90 and fix formatting.
	* config/tc-mcore.h: Convert to ISO-C90 and fix formatting.
	* config/tc-mn10200.c: Convert to ISO-C90 and fix formatting.
	* config/tc-ns32k.c: Convert to ISO-C90 and fix formatting.
	* config/tc-ns32k.h: Convert to ISO-C90 and fix formatting.
	* config/tc-openrisc.c: Convert to ISO-C90 and fix formatting.
	* config/tc-openrisc.h: Convert to ISO-C90 and fix formatting.
	* config/tc-or32.c: Convert to ISO-C90 and fix formatting.
	* config/tc-or32.h: Convert to ISO-C90 and fix formatting.
	* config/tc-pdp11.h: Convert to ISO-C90 and fix formatting.
	* config/tc-pj.c: Convert to ISO-C90 and fix formatting.
	* config/tc-pj.h: Convert to ISO-C90 and fix formatting.
	* config/tc-tahoe.c: Convert to ISO-C90 and fix formatting.
	* config/tc-tic80.c: Convert to ISO-C90 and fix formatting.
	* config/tc-tic80.h: Convert to ISO-C90 and fix formatting.
	* config/tc-v850.c: Convert to ISO-C90 and fix formatting.
	* config/tc-v850.h: Convert to ISO-C90 and fix formatting.
	* config/tc-w65.c: Convert to ISO-C90 and fix formatting.
	* config/tc-w65.h: Convert to ISO-C90 and fix formatting.
	* config/tc-xstormy16.c: Convert to ISO-C90 and fix formatting.
	* config/tc-xstormy16.h: Convert to ISO-C90 and fix formatting.

2005-03-23  Jim Blandy  <[email protected]>

	* config/tc-arm.c (arm_adjust_symtab): Fetch elf_sym's binding
	attributes properly.

2005-03-23  Mike Frysinger  <[email protected]>
	    Nick Clifton  <[email protected]>

	* configure.tgt: Accept any C library to accompany a GNU Linux
	implementation, not just the GNU C library.
	* configure.in: Likewise.
	* configure: Regenerate.

2005-03-23  Nick Clifton  <[email protected]>

	* config/tc-tic30.c: Convert to ISO C90 formatting.
	* config/tc-tic30.h: Convert to ISO C90 formatting.
	* config/tc-pdp11.c: Convert to ISO C90 formatting.
	* config/atof-vax.c: Convert to ISO C90 formatting.

2005-03-21  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (mips_frob_file): Sort BFD_RELOC_MIPS16_LO16
	relocations correctly as well.
	(mips_fix_adjustable): Don't make BFD_RELOC_MIPS16_LO16
	relocations in mergeable sections section-relative either.

2005-03-21  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (md_apply_fix3): Recognize XTENSA_PLT relocations.

2005-03-21  Nick Clifton  <[email protected]>

	* config/tc-sh.c (sh_elf_final_processing): Fix compile time
	warning by providing a prototype for sh_symbian_find_elf_flags.

	* cgen.c (gas_cgen_parse_operand): Fix typo introduced by
	previous delta.

2005-03-21  Alan Modra  <[email protected]>

	* configure.tgt: Handle setting of bfd_gas for fmt=multi targets
	along with other formats that set bfd_gas.  Remove unnecessary
	setting of bfd_gas.  Delete strongarm cases in generic_target
	switch.

2005-03-21  Alan Modra  <[email protected]>

	PR gas/780
	* config/tc-m68k.c (TRUNC, SEXT): Define.
	(issbyte, isubyte, issword, isuword, isbyte, isword): Use the above.
	(m68k_ip): Truncate or sign extend expressions as appropriate.
	(get_num): Likewise.
	(md_apply_fix3): Use SEXT.

2005-03-21  Alan Modra  <[email protected]>

	* Makefile.am (OBJ_FORMAT_CFILES): Prune config/obj-vms.c.
	(OBJ_FORMAT_HFILES): Prune config/obj-vms.h.
	(obj-vms.o): Delete rule.
	Run "make dep-am".
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.

2005-03-18  C Jaiprakash  <[email protected]>

	* config/tc-m68k.c (m68k_elf_final_processing): Set file specific
	flag for coldfire v4e.

2005-03-17  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xg_apply_tentative_value): Rename to
	xg_apply_fix_value and return a value to indicate success.
	(md_pcrel_from): Skip check of fx_done.  Return 0 if not PC-relative.
	(xtensa_force_relocation): Remove checks for VTABLE relocs.
	(xtensa_validate_fix_sub): New.
	(xtensa_fix_adjustable): Remove check for external or weak symbols.
	(tc_gen_reloc): Move code to handle difference of symbols and code to
	apply tentative fix values to ...
	(md_apply_fix3): ...here.  Enable standard overflow checks for simple
	8, 16, and 32 bit relocations.  Apply fixes for slot-specific
	relocations when linkrelax flag is not set.
	* config/tc-xtensa.h (xtensa_validate_fix_sub): Add prototype.
	(TC_FORCE_RELOCATION_SUB_SAME, TC_VALIDATE_FIX_SUB): Define.

2005-03-17  Jan Beulich  <[email protected]>

	* config/tc-i386.c (i386_scale): Beautify error message.
	(Intel syntax comments): Update.
	(struct intel_parser_s): Add fields in_offset, in_bracket, and
	next_operand.
	(intel_e04_1, intel_e05_1, intel_e05_1, intel_e09_1, intel_e10_1):
	Remove declarations.
	(intel_bracket_expr): Declare.
	(i386_intel_operand): Initialize new intel_parser fields. Wrap most
	of the function body in a loop allowing to split an operand into two.
	Replace calls to malloc and checks of it returning non-NULL with
	calls to xmalloc/xstrdup.
	(intel_expr): SHORT no longer handled here. Add comment indicating
	comparison ops need implementation.
	(intel_e04, intel_e04_1): Combine, replace recursion with loop.
	Check right operand of - does not specify a register when parsing
	the address of a memory reference.
	(intel_e05, intel_e05_1): Combine, replace recursion with loop.
	Check operands do not specify a register when parsing the address of
	a memory reference.
	(intel_e06, intel_e06_1): Likewise.
	(intel_e09, intel_e09_1): Combine, replace recursion with loop. Also
	handle SHORT as well as unary + and -. Don't accept : except for
	segment overrides or in direct far jump/call insns.
	(intel_brack_expr): New.
	(intel_e10, intel_e10_1): Combine, replace recursion with loop. Use
	intel_brack_expr.
	(intel_e11): Replace chain of if/else-if by switch, alloing fall-
	through in certain cases. Use intel_brack_expr. Add new diagnostics.
	Allow symbolic constants as register scale value.
	(intel_get_token): Replace call to malloc and check of return value
	with call to xmalloc. Change handling for FLAT to match MASM's.
	(intel_putback_token): Don't try to back up/free current token if
	that is T_NIL.

2005-03-16  Daniel Jacobowitz  <[email protected]>

	* configure.tgt: Set emulation for arm-*-eabi*.
	* config/tc-arm.c (meabi_flags): Check EABI_DEFAULT.
	* config/te-armeabi.h: New file.
	* config/te-armlinuxeabi.h (EABI_DEFAULT): Define.
	* config/te-symbian.h: Include "te-armeabi.h".

2005-03-16  Nick Clifton  <[email protected]>

	* cgen.c (gas_cgen_parse_operand): Copy opinfo parameter into a
	local variable in case it is clobbered by the setjmp.

2005-03-16  Nick Clifton  <[email protected]>
	    Ben Elliston  <[email protected]>

	* configure.in (werror): New switch: Add -Werror to the
	compiler command line.  Enabled by default.  Disable via
	--disable-werror.
	* configure: Regenerate.

2005-03-16  Nick Clifton  <[email protected]>

	* config/obj-coff.h: Convert to ISO C90 formatting.
	* config/obj-coff.c: Convert to ISO C90 formatting.

2005-03-15  Zack Weinberg  <[email protected]>

	* config/tc-arm.c (do_mla): Rename to do_mlas, take second
	is_mls parameter; do not diagnose Rm==Rd when is_mls.
	(do_mla, do_mls, five_bit_unsigned_immediate, bfci_lsb_and_width)
	(do_bfc, do_bfi, do_bfx, do_rbit, do_mov16, do_ldsttv4): New functions.
	(insns): Add ARMv6T2 instructions:
	bfc bfi mls movw movt rbit sbfx ubfx ldrht ldrsht ldrsbt strht.
	(arm_archs): Add V6T2 variants.

2005-03-15  Nick Clifton  <[email protected]>

	* NEWS: Add cutoff for changes in 2.16 release.

2005-03-15  Jan Beulich  <[email protected]>

	* expr.c (operand): Merge handling of unary + into that for unary
	-, !, and ~.

2005-03-14  Eric Christopher  <[email protected]>

	* config/tc-mips.c: Include dw2gencfi.h.
	(mips_cfi_frame_initial_instructions): New.
	* config/tc-mips.h (TARGET_USE_CFIPOP): Define.
	(tc_cfi_frame_initial_instructions): Ditto.
	(DWARF2_DEFAULT_RETURN_COLUMN): Ditto.
	(DWARF2_CIE_DATA_ALIGNMENT): Ditto.
	* Makefile.am: Update dependencies.
	* Makefile.in: Regenerate.

2005-03-15  Alan Modra  <[email protected]>

	* po/es.po: Commit new Spanish translation.

2005-03-14  Alan Modra  <[email protected]>

	* po/tr.po: Commit new Turkish translation.

2005-03-12  Zack Weinberg  <[email protected]>

	* config/tc-arm.c (tinsns): Add ARMv6K instructions sev, wfe,
	wfi, yield.

2005-03-11  Daniel Jacobowitz  <[email protected]>

	* config-gas.com: Mark vax-vms as obsolete.
	* configure.in: Remove fmt=vms support.
	* config.in: Regenerate.
	* configure: Regenerate.
	* config/obj-vms.h, config/obj-vms.c, config/vms-conf.h: Remove.

2005-03-10  Sterling Augustine  <[email protected]>
	    Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (finish_vinsn): Include the last instruction slot
	when checking if xg_resolve_literals needs to be called.
	* config/tc-xtensa.h: Fix spelling typo in a comment.

2005-03-10  Jan Beulich  <[email protected]>

	* config/tc-tic54x.h (tic54x_macro_info): Change parameter type.
	* config/tc-tic54x.c (tic54x_macro_info): Likewise. Replace hand-
	crafted structure declarations with the types from macro.h.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (s_cpsetup): Use '__gnu_local_gp' instead of '_gp'
	for -mno-shared optimization.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (MAX_VR4130_NOPS, MAX_DELAY_NOPS): New macros.
	(MAX_NOPS): Bump to 4.
	(mips_fix_vr4130): New variable.
	(nops_for_vr4130): New function.
	(nops_for_insn): Use MAX_DELAY_NOPS rather than MAX_NOPS.  Use
	nops_for_vr4130 if working around VR4130 errata.
	(OPTION_FIX_VR4130, OPTION_NO_FIX_VR4130): New macros.
	(md_longopts): Add -mfix-vr4130 and -mno-fix-vr4130.
	(md_parse_option): Handle them.
	(md_show_usage): Print them.
	* doc/c-mips.texi: Document -mfix-vr4130 and -mno-fix-vr4130.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn): Remove cop_interlocks test from
	branch delay code.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.h (mips_flush_pending_output): Delete.
	(mips_emit_delays): Declare.
	(md_flush_pending_output): Use mips_emit_delays.
	* config/tc-mips.c (mips_no_prev_insn): Remove parameter; always forget
	the previous instructions.
	(md_begin, append_insn, md_parse_option): Update callers.
	(mips_emit_delay): Remove parameter.  Move INSNS != 0 code to
	start_noreorder.
	(mips_align, s_change_sec, s_cons, s_float_cons, s_gpword)
	(s_gpdword): Update callers.
	(start_noreorder, end_noreorder): New functions.
	(macro, macro2, mips16_macro, s_mipsset): Use them instead of
	manipulating mips_opts or prev_nop_frag directly.
	(mips_flush_pending_output): Delete.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (mips_move_labels): New function, taken from...
	(append_insn, mips_emit_delays): ...here.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (MAX_NOPS): New macro.
	(history): Resize to 1 + MAX_NOPS.
	(fix_vr4120_class): New enumeration.
	(vr4120_conflicts): New variable.
	(init_vr4120_conflicts): New function.
	(md_begin): Call it.
	(insn_uses_reg): Constify first argument.
	(classify_vr4120_insn, insns_between, nops_for_insn, nops_for_sequence)
	(nops_for_insn_or_target): New functions.
	(append_insn): Use the new nops_for_* functions instead of inline
	delay checks.  Generalize prev_nop_frag handling to handle an
	arbitrary history length.  Insert nops into the history buffer
	once the number of nops in prev_nop_frag is fixed.
	(emit_delays): Use nops_for_insn instead of inline delay checks.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn): Remove now-redundant nops != 0
	check from branch delay code.  Remove unnecessary check for branches.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (dummy_opcode): Delete.
	(nop_insn, mips16_nop_insn): New variables.
	(NOP_INSN): New macro.
	(insn_length, create_insn, install_insn, move_insn, add_fixed_insn)
	(add_relaxed_insn, insert_into_history, emit_nop): New functions.
	(md_begin): Initialize nop_insn and mips16_nop_insn.
	(append_insn): Use the new emit_nop function to add nops, recording
	them in the history buffer.  Use add_fixed_insn or add_relaxed_insn
	to reserve room for the instruction and install_insn to install the
	final form.  Use insert_into_history to record the instruction in
	the history buffer.  Use move_insn to do delay slot filling.
	(mips_emit_delays): Use add_fixed_insn instead of the emit_nop macro.
	(macro_build, mips16_macro_build, macro_build_lui, mips_ip)
	(mips16_ip): Use create_insn to initialize mips_cl_insns.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (INSERT_BITS, EXTRACT_BITS, INSERT_OPERAND)
	(EXTRACT_OPERAND, MIPS16_INSERT_OPERAND, MIPS16_EXTRACT_OPERAND): New.
	(insn_uses_reg, reg_needs_delay, append_insn, macro_build)
	(mips16_macro_build, macro_build_lui, mips16_macro, mips_ip)
	(mips16_ip): Use the new macros instead of explicit masks and shifts.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (mips_cl_insn): Replace the valid_p, delay_slot_p
	and extended_p fields with a single fixed_p field.
	(append_insn, mips_no_prev_insn): Adjust accordingly.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (mips_cl_insn): Replace reloc_type array with
	a single mips16_absolute_jump_p bit.
	(append_insn): Adjust accordingly.

2005-03-09  Richard Sandiford  <[email protected]>

	* config/tc-mips.h (mips_cl_insn): Move definition to...
	* config/tc-mips.c (mips_cl_insn): ...here.  Add new fields:
	frag, where, fixp, reloc_type, valid_p, noreorder_p, delay_slot_p
	and extended_p.
	(history): New variable.
	(prev_insn, prev_prev_insn, prev_insn_valid, prev_insn_frag)
	(prev_insn_where, prev_insn_reloc_type, prev_insn_fixp)
	(prev_insn_is_delay_slot, prev_insn_unreordered, prev_insn_extended)
	(prev_prev_insn_unreordered): Delete.
	(reg_needs_delay, append_insn, mips_no_prev_insn, mips_emit_delays)
	(macro_start): Replace uses of prev_insn* with the equivalent history[]
	field.

2005-03-08  Daniel Jacobowitz  <[email protected]>

	* doc/Makefile.am: Update as.info dependencies.
	* aclocal.m4, Makefile.in, doc/Makefile.in: Regenerated.

2005-03-08  Jan Beulich  <[email protected]>

	* doc/as.texinfo: Add sentence to indicate redefining a macro is an
	error, and point to .purgem documentation if someone really needs
	re-definitions.
	* NEWS: Mention macro redefinition is now an error.

2005-03-08  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Track last slot user insn was
	emitted to. Add more precise diagnostics for non-fitting insns based
	on that. Eliminate now superfluous special casing of MLX. Clear out
	slot information when dropping an insn.

2005-03-08  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_section_name): Rename to...
	(cross_section): In addition to separating the name from the rest of
	the arguments, also carry out the operation.
	(dot_xdata): Use cross_section.
	(dot_float_cons): Likewise.
	(dot_xstringer): Likewise.
	(dot_xdata_ua): Likewise.
	(dot_float_cons_ua): Likewise. Pass float_cons, not stmt_float_cons.

2005-03-05  Alan Modra  <[email protected]>

	* po/gas.pot: Regenerate.

2005-03-04  David Daney  <[email protected]>

	* config/tc-mips.c (macro_build_lui): Use '__gnu_local_gp'
	instead of '_gp' for -mno-shared optimization.
	(s_cpload): Ditto.
	(s_abicalls): Document it in the comment.
	(md_show_usage): Document the -mno-shared option.

2005-03-04  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (mips_set_options): Add sym32 field.
	(mips_opts): Initialize it.
	(HAVE_32BIT_ADDRESSES): Set to true if pointers are 32 bits wide.
	(HAVE_64BIT_ADDRESSES): Redefine as !HAVE_32BIT_ADDRESSES.
	(HAVE_32BIT_SYMBOLS, HAVE_64BIT_SYMBOLS): New macros.
	(load_address): Use HAVE_64BIT_SYMBOLS instead of HAVE_64BIT_ADDRESSES
	when deciding whether to use a symbolic %highest/%higher expansion.
	(macro): Likewise.  Remove o64/n32 linux hack.  Always use
	ADDRESS_ADD*_INSN for address addition in the expansion of "dla"
	and "la".  Handle constants separately from symbolic expressions in
	the "ld_st:" case, using 64-bit arithmetic if HAVE_64BIT_ADDRESSES
	and using load_register to load the high part of the address.
	(OPTION_MSYM32, OPTION_NO_MSYM32): New macros.
	(OPTION_ELF_BASE): Bump by 2.
	(md_longopts): Add entries for -msym32 and -mno-sym32.
	(md_parse_option): Handle them.
	(usage): Document them.
	(s_mipsset): Handle ".set sym32" and ".set nosym32".
	(s_cpload, s_cpsetup): Use HAVE_64BIT_SYMBOLS instead of
	HAVE_64BIT_ADDRESSES to detect 64-bit values of "_gp".
	* doc/c-mips.texi: Document ".set sym32", ".set nosym32",
	-msym32 and -mno-sym32.

2005-03-03  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (load_address): Implement GP optimization
	for 64bit address space non-PIC. Fix formatting.
	(macro): Likewise. Simplify code.
	(md_parse_option): Don't bail out if -G 0 is set for PIC code.
	(mips_after_parse_args): Simplify code.

2005-03-03  Nick Clifton  <[email protected]>

	* expr.c (operand): Remove redundant code enclosed by #ifdef
	RELAX_PAREN_GROUPING....#endif.

	* config/tc-mn10200.c (tc_gen_reloc): Handle the case where the
	reloc is the difference of two symbols defined in the same
	section.

	* config/tc-iq2000.c (line_comment_chars): Include the # character
	as otherwise this breaks #APP/#NO_APP processing.

2005-03-03  Ramana Radhakrishnan  <[email protected]>

	* config/tc-arc.c(md_assemble): Remove dead code for handling
	immediate indexing of ld and st .

2005-03-02  Daniel Jacobowitz  <[email protected]>
	    Joseph Myers  <[email protected]>

	* config/tc-mips.c (percent_op): Add %tlsgd, %tlsldm, %dtprel_hi,
	%dtprel_lo, %tprel_hi, %tprel_lo, and %gottprel.
	(parse_relocation): Check for a word break after a relocation
	operator.
	(md_apply_fix3): Handle TLS relocations, and mark thread-local
	symbols.

2005-03-02  Alan Modra  <[email protected]>

	* config/tc-ppc.c (ppc_fix_adjustable <ELF>): Remove bogus checks.

2005-03-02  Jan Beulich  <[email protected]>

	* as.c (main): Use unlink_if_ordinary instead of unlink.
	* messages.c (as_fatal): Likewise.

2005-03-02  Jan Beulich  <[email protected]>

	* config/tc-i386.c (build_modrm_byte): Add lock prefix for cr8...15
	accesses.
	(parse_register): Allow cr8...15 in all modes.

2005-03-02  Jan Beulich  <[email protected]>

	* config/tc-i386.c (intel_e11): If not followed by T_PTR, treat T_BYTE
	etc. like normal symbol references (T_ID).

2005-03-02  Alan Modra  <[email protected]>

	* symbols.c (fb_label_name): Fix silly thinko in last change.

2005-03-02  Alan Modra  <[email protected]>

	* expr.c (integer_constant): Remove TARGET_WORD_SIZE hack.
	* config/tc-m68k.h (TARGET_WORD_SIZE): Delete.

	* symbols.c (fb_label_name): Allow an augend of 2 for mmix.

2005-03-01  Ramana Radhakrishnan  <[email protected]>

	PR gas/708
	* config/tc-arc.c (md_assemble): Initialize suffix for extension
	suffixes also.

2005-03-01  Alan Modra  <[email protected]>

	* config/obj-coff.c (fixup_segment): Delete sy_mri_common assertion.

	* as.h (assert): Warning fix.
	* expr.c (expr): Correct assertion.
	* read.c (s_comm_internal): Remove assertion.
	* write.c (relax_segment): Enable vma assertion only for BFD_ASSEMBLER.
	(fixup_segment): Remove assertion.
	* config/tc-dlx.c (machine_ip): Remove untrue assertions.
	(md_apply_fix3): Likewise.
	* config/tc-i370.c (md_begin): Correct assertion.
	(i370_macro): Warning fix for assertion.

2005-03-01  Alan Modra  <[email protected]>

	* configure.in (AC_C_BIGENDIAN): Invoke.
	* configure: Regenerate.
	* write.c (write_object_file <!BFD_ASSEMBLER>): Don't use sizeof
	host variable to set string header size.
	* config/obj-aout.c (obj_header_append): Don't use host structs.
	(obj_symbol_to_chars): Likewise.
	(obj_emit_strings): Likewise.  Use the passed in output pointer.
	* config/obj-aout.h (H_GET_FILE_SIZE): Include H_GET_LINENO_SIZE.
	* config/obj-bout.c (obj_emit_relocations): Use md_reloc_size,
	not sizeof host struct.
	(obj_header_append, obj_symbol_to_chars): Don't use host structs.
	(obj_emit_strings): Likewise.
	* config/obj-bout.h (EXEC_BYTES_SIZE): Define.
	(N_TXTOFF, H_GET_FILE_SIZE, H_GET_HEADER_SIZE): Use instead of
	sizeof host struct.
	(H_SET_SYMBOL_TABLE_SIZE): Hard code sym size rather than using
	sizeof host struct.
	(host_number_to_chars): Define.
	* config/obj-hp300.c (hp300_header_append): Don't use sizeof
	host internal struct to set header sizes.
	* config/tc-i960.c (md_number_to_field): Warning fix.
	(md_ri_to_chars): Use host byte order.
	(get_cdisp, md_apply_fix3): Warning fix.
	* config/tc-m68k.c (md_assemble): Don't use sizeof host short.

2005-02-28  Ramana Radhakrishnan  <[email protected]>

	* doc/c-arc.texi: Update documentation about ARC's extension
	instructions.

2005-02-27  Svein E. Seldal  <[email protected]>

	* config/tc-tic4x.c (tic4x_gen_to_words): Changed mail
	address for myself.

2005-02-23  Alan Modra  <[email protected]>

	* cgen.c: Warning fixes.
	* config/tc-arc.c: Likewise.
	* config/tc-arm.c: Likewise.
	* config/tc-avr.c: Likewise.
	* config/tc-d10v.c: Likewise.
	* config/tc-d30v.c: Likewise.
	* config/tc-frv.c: Likewise.
	* config/tc-frv.h: Likewise.
	* config/tc-h8300.c: Likewise.
	* config/tc-h8500.c: Likewise.
	* config/tc-i370.c: Likewise.
	* config/tc-i960.c: Likewise.
	* config/tc-ia64.c: Likewise.
	* config/tc-ip2k.c: Likewise.
	* config/tc-m68hc11.c: Likewise.
	* config/tc-maxq.c: Likewise.
	* config/tc-mcore.c: Likewise.
	* config/tc-mips.c: Likewise.
	* config/tc-msp430.c: Likewise.
	* config/tc-pj.c: Likewise.
	* config/tc-ppc.c: Likewise.
	* config/tc-ppc.h: Likewise.
	* config/tc-s390.c: Likewise.
	* config/tc-sh.c: Likewise.
	* config/tc-sh64.c: Likewise.
	* config/tc-tic4x.c: Likewise.
	* config/tc-tic80.c: Likewise.
	* config/tc-v850.c: Likewise.
	* config/tc-vax.c: Likewise.
	* config/tc-w65.c: Likewise.
	* config/tc-xstormy16.c: Likewise.
	* config/tc-z8k.c: Likewise.

2005-02-22  Catherine Moore  <[email protected]>

	* read.c (read_a_source_file): Reinstate TC_EQUAL_IN_INSN test.
	* doc/internals.texi (TC_EQUAL_IN_INSN): Reinstate.

2005-02-22  Eric Christopher  <[email protected]>

	* config/tc-mips.c (struct proc): Change isym to
	func_sym. New member func_end_sym.
	(s_mips_ent): Update.
	(s_mips_end): Ditto. Add code to compute function size.

2005-02-22  Alan Modra  <[email protected]>

	* read.c: Warning fixes.
	* config/obj-elf.c: Likewise.

2005-02-22  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (append_insn): Call dwarf2_emit_insn() before
	emitting insn.

2005-02-21  H.J. Lu  <[email protected]>

	* config/obj-coff.c (obj_coff_section): Replace SEC_SHARED with
	SEC_COFF_SHARED.

	* config/tc-tic54x.c (tic54x_bss): Replace SEC_BLOCK with
	SEC_TIC54X_BLOCK.
	(demand_empty_rest_of_line): Likewise.
	(tic54x_sblock): Likewise.
	(tic54x_clink): Replace with SEC_CLINK with SEC_TIC54X_CLINK.

2005-02-21  Alan Modra  <[email protected]>

	* read.c (address_bytes): New function.
	(TC_ADDRESS_BYTES): Default for BSD_ASSEMBLER to address_bytes.
	(potable): Add "dc.a".
	(cons_worker): Handle "dc.a".
	* doc/internals.texi (TC_ADDRESS_BYTES): Document.

2005-02-21  Alan Modra  <[email protected]>

	* input-file.c (input_file_open): Rearrange to avoid warning.

2005-02-19  Alan Modra  <[email protected]>

	* config/tc-hppa.h (TC_EQUAL_IN_INSN): Delete.
	* read.c (read_a_source_file): Remove TC_EQUAL_IN_INSN test.
	* doc/internals.texi (TC_EQUAL_IN_INSN): Delete.

2005-02-18  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (macro_build_ldst_constoffset): Fail on $at
	uses after .set noat.
	(load_address): Likewise.
	(macro): Likewise. Don't try to avoid $at use by sacrificing
	the target register before it is stored, it won't work.

2005-02-17  James E Wilson  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Stop filling a bundle if we
	see an instruction that specifies a template.

2005-02-18  Alan Modra  <[email protected]>

	* config/tc-openrisc.c (openrisc_relax_frag): Delete unused function.
	* config/tc-sparc.c (sparc_ip): Make op_exp static to silence warnings.
	* config/tc-tic80.c (build_insn): Init insn[1] to silence warning.

2005-02-17  H.J. Lu  <[email protected]>

	* NEWS: Mention "-mhint.b=[ok|warning|error]".

	* config/tc-ia64.c (md): Add hint_b.
	(emit_one_bundle): Handle md.hint_b for "hint".
	(md_parse_option): Accepted "-mhint.b=[ok|warning|error]".
	(md_show_usage): Add "-mhint.b=[ok|warning|error]".
	(ia64_init): Set md.hint_b to error.
	(md_assemble): Handle md.hint_b for "hint.b".

	* doc/as.texinfo: Add "-mhint.b=[ok|warning|error]".
	* doc/c-ia64.texi: Likewise.

2005-02-17  Alan Modra  <[email protected]>

	* tc.h (struct relax_type, relax_typeS): Move from here..
	* as.h: ..to here.  Make rlx_forward and rlx_backward an offsetT.
	* ecoff.c (ecoff_new_file): Add appfile param.
	* ecoff.h (ecoff_new_file): Likewise.
	* itbl-lex.h: New file.
	* itbl-lex.l: Include itbl-lex.h.
	* itbl-parse.y: Likewise.
	(insntbl_line, yyparse, yylex): Move to itbl-lex.h.
	* read.c (s_app_file_string): Mark appfile possibly unused.
	* subsegs.c (seg_not_empty_p): Make sec possibly unused.
	* subsegs.h (struct seg_info_trash): Delete.
	(seg_info): Use segment_info_type instead.
	* config/obj-coff.c (struct filename_list): Make filename const char *.
	* config/obj-ecoff.h (obj_app_file): Pass app to ecoff_new_file.
	* config/obj-elf.c (elf_file_symbol): Similarly.
	* config/tc-a29k.c (md_apply_fix3): Make val a valueT.  Don't use
	signed right shift.
	* config/tc-arc.c (md_operand): Warning fix.
	* config/tc-arm.c (arm_parse_reloc): Only define when OBJ_ELF.
	(md_begin): Rearrange #if defined OBJ_COFF || defined OBJ_ELF.
	* config/tc-cris.h (TC_IMPLICIT_LCOMM_ALIGNMENT): Use do while.
	* config/tc-frv.c (frv_force_relocation): Warning fix.
	* config/tc-m68k.c (md_parse_option): Delete unused var.
	* config/tc-mcore.c (mylog2): Rename from log2 throughout.
	* config/tc-sparc.c: Likewise.
	(s_common): Warning fix.
	* config/tc-mips.c (append_insn): Use unsigned long long expressions.
	* config/tc-mmix.c (PUSHJSTUB_MAX, PUSHJSTUB_MIN): Define from
	addressT.
	* config/tc-s390.c (s390_insn): Delete test of unsigned >= 0.
	* config/tc-sh.c (sh_cfi_frame_initial_instructions,
	sh_regname_to_dw2regnum): Only define for OBJ_ELF.
	* config/tc-tic4x.c (tic4x_insert_reg): Use ISLOWER.
	(tic4x_do_align): Use TIC_NOP_OPCODE.
	* config/tc-tic4x.h (TIC_NOP_OPCODE): Rename from NOP_OPCODE.
	* config/tc-vax.c: Include netinet/in.h.
	(tc_headers_hook): Formatting.
	* config/tc-xstormy16.c (md_pcrel_from_section): Correct parens.

2005-02-17  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (ia64_parse_name): Don't advance 'name' when
	parsing inN, locN, outN. Set 'idx' to offset register number starts
	at. Don't handle numbers with leading zeroes or beyond 95. Remove
	pointless cast.

2005-02-16  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (load_address): Fix formatting.
	(macro): Don't use AT if .set noat is in effect. Fix formatting.
	Catch macros which are unexpandable without AT. Remove duplicate
	zeroing of used_at.
	(macro2): Remove duplicate zeroing of used_at.

2005-02-16  Alan Modra  <[email protected]>

	* dw2gencfi.c (output_cie, output_fde): Use DW_CFA_nop rather
	than zero.

2005-02-15  Nigel Stephens  <[email protected]>
	    Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (reloc_needs_lo_p): Handle
	BFD_RELOC_MIPS16_HI16_S.
	(fixup_has_matching_lo_p): Handle BFD_RELOC_MIPS16_LO16.
	(append_insn): Add BFD_RELOC_MIPS16_GPREL, BFD_RELOC_MIPS16_HI16_S
	and BFD_RELOC_MIPS16_LO16 to relocs to suppress overflow
	complaints on.
	(mips16_ip): Resolve BFD_RELOC_MIPS16_HI16_S,
	BFD_RELOC_MIPS16_HI16 and BFD_RELOC_MIPS16_LO16 for constants.
	Call my_getSmallExpression() to parse percent operators.
	(percent_op_match, mips_percent_op): Separate definitions.
	(mips16_percent_op): Define percent operators for the MIPS16 mode.
	(parse_relocation): Handle the MIPS16 mode using
	mips16_percent_op.
	(md_apply_fix3): Handle BFD_RELOC_MIPS16_HI16,
	BFD_RELOC_MIPS16_HI16_S and BFD_RELOC_MIPS16_LO16.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (md_apply_fix3): Call ia64_gen_real_reloc_type
	instead of explicitly dealing with the translation; exclude
	relocations that are already pcrel, however.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.c: Include limits.h (if available).
	(gr_values[0]): Set path to INT_MAX.
	(dot_reg_val): Don't allow changing value of r0. Limit range of
	general registers at r127.
	(specify_resource): Default resource index is -1. Don't set resource
	index (in case IA64_RS_RSE) without setting the specific flag.
	(note_register_values): Check operand is O_constant before tracking
	input value of moves. Add tracking for dep.z with constant inputs.
	(print_dependency): Resource index of specific resource may be zero.
	(check_dependencies): Likewise.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_operands): New local variables reg1, reg2,
	reg_class. Check operands and emit diagnostics for illegal use of
	registers.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (ia64_gen_real_reloc_type): Define and initialize
	new variables type, suffix, and width. Handle
	BFD_RELOC_IA64_DIR(32|64)[LM]SB in FUNC_LT_FPTR_RELATIVE case.
	Handle BFD_RELOC_IA64_DIR64[LM]SB in FUNC_TP_RELATIVE case. Add
	FUNC_DTP_MODULE case. Handle BFD_RELOC_IA64_DIR32[LM]SB in
	FUNC_DTP_RELATIVE case. Return incoming relocation type if
	BFD_RELOC_IA64_IPLT[LM]SB in FUNC_IPLT_RELOC case. Generate warning
	if unable to translate relocation type, using the new variables.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.h (ia64_symbol_chars): Declare.
	(ty_symbol_chars): Define.
	* config/tc-ia64.c (ia64_symbol_chars): Define.

2005-02-15  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (ia64_parse_name): Only update next character if
	input_line_pointer was advanced.

2005-02-14  Kaz Kojima  <[email protected]>

	* config/tc-sh.c (md_apply_fix3): Add parentheses around &
	within |.

2005-02-13  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (md_parse_option): Handle -xnone and -xdebugn.
	(md_show_usage): Add -xnone, -xdebugn, and -xdebugx. Relocate default
	indicator.
	(ia64_init): Set md.detect_dv.
	(ia64_start_line): New static variable warned. Warn only once when
	encountering explicit stops in automatic mode.
	* doc/c-ia64.texi: Describe -xnone, -xdebugn, and -xdebugx.
	* NEWS: Mention new default mode.

2005-02-13  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_rot): Add comment that name strings should
	be freed when wiping out previous state. Canonicalize names before
	use. Free name string when detecting redefinition.
	(dot_pred_rel): Call generic expression parser to process arguments.
	Handle O_register case for individual predicates and O_subtract for
	ranges.
	(ia64_parse_name): Canonicalize name before looking it up in dynamic
	register hash.
	(ia64_canonicalize_symbol_name): Strip off all trailing # characters.
	Warn if multiple found, issue error if resulting symbol name has zero
	length.
	(dot_alias): Canonicalize name before use.

2005-02-11  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (unwind_diagnostic): Return -1 for warning
	and 0 for error.
	(in_procedure): Return -1 for warning.
	(in_prologue): Likewise.
	(in_body): Likewise.

2005-02-11  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (dot_xdata): Undo the last change.
	(dot_float_cons): Likewise.
	(dot_xstringer): Likewise.
	(dot_xdata_ua): Likewise.
	(dot_float_cons_ua): Likewise.

2005-02-11  H.J. Lu  <[email protected]>

	* NEWS: Mention "-munwind-check=[warning|error]".

	* config/tc-ia64.c (md): Add unwind_check.
	(unwind_diagnostic): New.
	(in_procedure): Call unwind_diagnostic when a directive isn't
	in procedure.
	(in_prologue): Call unwind_diagnostic when a directive isn't in
	prologue.
	(in_body): Call unwind_diagnostic when a directive isn't in
	body region.
	(dot_endp): Set md.unwind_check to error before calling
	in_procedure and restore it after. When the name is missing or
	couldn't be found, use the one from the last .proc if
	md.unwind_check isn't error. Warn if md.unwind_check is
	warning.
	(md_parse_option): Handle "-munwind-check=[warning|error]".
	(md_show_usage): Add "-munwind-check=[warning|error]".
	(ia64_init): Set md.unwind_check to warning.

	* doc/as.texinfo: Add "-munwind-check=[none|warning|error]".
	* doc/c-ia64.texi: Likewise.

2005-02-11  Jan Beulich  <[email protected]>

	* config/tc-ia64.h (LEX_AT): Include LEX_BEGIN_NAME.
	(LEX_QM): Likewise.
	(ia64_parse_name): New third parameter.
	(md_parse_name): Pass third argument.
	* config/tc-ia64.c (pseudo_func): Placeholders use NULL as name.
	(md_operand): Handling of '@'-prefixed symbols moved from here...
	(ia64_parse_name): ...to here.

2005-02-11  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (md): Remove last_groups and group_idx.
	(errata_nop_necessary_p): Remove declaraction and definition.
	(emit_one_bundle): Don't call errata_nop_necessary_p. Don't
	update md.group_idx. Don't reset md.last_groups.

2005-02-11  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_section_name): Handle non-quoted first
	argument.
	(dot_xdata): Free section name after use.
	(dot_float_cons): Likewise.
	(dot_xstringer): Likewise.
	(dot_xdata_ua): Likewise.
	(dot_float_cons_ua): Likewise.
	(md_pseudo_table): Add xdata16 and xdata16.ua.

2005-02-10  H.J. Lu  <[email protected]>

	* doc/all.texi: Add IA64.
	* doc/as.texinfo: Likewise.

	* doc/c-ia64.texi: Fix typos.

2005-02-10  Julian Brown  <[email protected]>

	* config/tc-arm.c (do_t_ldmstm): Change BFD_RELOC_NONE to
	BFD_RELOC_UNUSED.
	(do_t_push_pop): Likewise.
	(md_assemble): Likewise.
	(md_apply_fix3): Handle BFD_RELOC_NONE correctly, make
	BFD_RELOC_UNUSED same as previous meaning of BFD_RELOC_NONE.
	(create_unwind_entry): Output dependency on the required personality
	routines.

2005-02-07  Nathan Sidwell  <[email protected]>

	* as.h (seg_not_empty_p): Return int, not bfd_boolean.
	* subsegs.c (seg_not_empty_p): Likewise.

2005-02-07  Inderpreet Singh <[email protected]>

	* config/tc-maxq.c (md_estimate_size_before_relax): Correct the
	relative jump calculation.
	<md_convert_frag) : Likewise.
	<output_disp): Likewise.

2005-02-07  Hans-Peter Nilsson  <[email protected]>

	* write.c (write_object_file): Recognize warning-symbol construct
	and skip object- and target- handling for the second symbol.

2005-02-02  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (dot_pred_rel): Update comment. Handle @-prefixed
	designators along with quoted ones. Free copy of quoted designator
	when done.

2005-02-01  Ben Elliston  <[email protected]>

	* config/atof-ieee.c, config/obj-coff.c, config/obj-elf.c,
	config/obj-ieee.c, config/obj-som.c, config/obj-vms.c,
	config/tc-a29k.c, config/tc-alpha.c, config/tc-arc.c,
	config/tc-arm.c, config/tc-d30v.c, config/tc-dlx.c,
	config/tc-fr30.c, config/tc-h8300.c, config/tc-h8500.c,
	config/tc-i370.c, config/tc-i386.c, config/tc-i960.c,
	config/tc-ia64.c, config/tc-m32r.c, config/tc-m32r.h,
	config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-mips.c,
	config/tc-mn10200.c, config/tc-msp430.c, config/tc-ns32k.c,
	config/tc-openrisc.c, config/tc-or32.c, config/tc-pdp11.c,
	config/tc-pj.c, config/tc-sparc.h, config/tc-tic54x.c,
	config/tc-tic80.c, config/tc-v850.c, config/tc-w65.c,
	config/tc-xtensa.c, config/tc-z8k.c, config/xtensa-relax.c: Remove
	#if 0'd code throughout.

2005-01-31  Nick Clifton  <[email protected]>

	* as.c (parse_args): Bump copyright date reported by --version to
	2005.

2005-01-31  Nick Clifton  <[email protected]>

	* configure.tgt: Remove obsolete targets m68k-lynxos, sparc-lynxos
	and vax-vms.

2005-01-31  Jan Beulich  <[email protected]>

	* macro.c (buffer_and_nest): Allow 'from' being NULL; handle anything
	that can end with .endr in that case. Make requiring/permitting
	pseudo-ops without leading dot closer to the logic in read.c serving
	the same purpose.
	(expand_irp): Don't pass a mnemonic to buffer_and_nest as it will be
	ignored.

2005-01-31  Jan Beulich  <[email protected]>

	* macro.c (do_formals): Adjust to no longer accept empty parameter
	names.
	(define_macro): Adjust to no longer accept empty macro name, garbage
	following the parameters, or macros that were previously defined.
	* read.c (s_bad_end): Declare.
	(potable): Add endm. Handler for endr and endm is s_bad_end.
	(s_bad_end): Rename from s_bad_endr. Adjust to handle both .endm
	and .endr.
	* read.h (s_bad_endr): Remove.

2005-01-31  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_operands): Parse all specified operands,
	immediately discarding (but counting) those exceeding the maximum
	possible amount. Track whether output and input operand counts ever
	matched, and use this to better indicate which of the operands/
	operand types was wrong; specifically don't default to pointing to
	the first operand.

2005-01-31  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (unwind): Remove proc_end (now an automatic
	variable in dot_endp). Add body and insn. Make prologue,
	prologue_mask, body, and insn bitfields.
	(fixup_unw_records): Remove spurious new-lines from end of diagnostic
	messages.
	(in_procedure, in_prologue, in_body): New.
	(dot_fframe, dot_vframe, dot_vframesp, dot_vframepsp, dot_save,
	dot_restore, dot_restorereg, dot_restorereg_p, dot_handlerdata,
	dot_unwentry, dot_altrp, dot_savemem, dot_saveg, dot_savef, dot_saveb,
	dot_savegf, dot_spill, dot_spillreg, dot_spillmem, dot_spillreg_p,
	dot_spillmem_p, dot_label_state, dot_copy_state, dot_unwabi,
	dot_personality): Use the appropriate one of the above.
	(dot_proc): Clear unwind.proc_start; set to current location only if
	none of the entry points were valid. Check for non-zero-length entry
	point names. Check that entry points aren't defined, yet. Clear
	unwind.prologue, unwind.body, and unwind.insn.
	(dot_body): Call in_procedure. Check that first directive in procedure
	had no insns emitted before. Set unwind.body.
	(dot_prologue): Call in_procedure. Check that not already in prologue.
	Check that first directive in procedure had no insns emitted before.
	Clear unwind.body.
	(dot_endp): Call in_procedure. Declare proc_end. Check for non-zero-
	length entry point names. Check that entry points became defined.
	(md_assemble): Set unwind.insn once unwind.proc_start is defined.

2005-01-31  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Snapshot manual bundling state
	before actually using it. Don't generate an error in manual bundling
	mode when looking at an insn requiring slot 2 but not yet at slot 2.
	Don't generate an error in manual bundling mode when looking at an
	insn required to be last in its group but the required slot hasn't
	been reached, yet. Allow conversion from MII to MI;I for bundle
	consisting of only 2 insns with the stop between them. Suppress
	various meaningless errors resulting from detecting earlier ones.

2005-01-31  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (parse_operands): Also handle alloc without first
	input being ar.pfs.

2005-01-28  Christian Groessler  <[email protected]>

	* config/tc-z8k.c (md_assemble): Improve error detection.

2005-01-28  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (ia64_estimate_size_before_relax): Allocate space
	for personality routine pointer only if there is one.
	(ia64_convert_frag): Likewise.
	(generate_unwind_image): Likewise.

2005-01-27  Christian Groessler  <[email protected]>

	* config/tc-z8k.c (INSERT): Remove, not used anywhere.
	(md_apply_fix3): Make relative branches out of range an error
	instead of a warning.  Display correct line number for out of
	range branches/calls/memory accesses.

2005-01-27  Nathan Sidwell  <[email protected]>

	* dwarf2dbg.c (dwarf2_finish): Correct logic for determining when
	to emit .debug_line and other debug sections.
	* as.h (seg_not_empty_p): Declare.
	* subsegs.c (seg_not_empty_p): New predicate.

2005-01-27  Andrew Cagney  <[email protected]>

	* configure: Regenerate to track ../gettext.m4 change.

2005-01-27  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Change "?imbf??" to "?ibmfxx".

2005-01-27  Jan Beulich  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Add late resolution of move
	to/from application registers dynamic insns.
	(md_assemble): Defer resolution of move to/from application registers
	dynamic insns when they can be issued on either the I- or M-units.

2005-01-25  Alexandre Oliva  <[email protected]>

	* config/tc-frv.c (md_apply_fix3): Mark TLS symbols as such.
	2004-12-10  Alexandre Oliva  <[email protected]>
	* config/tc-frv.c (frv_pic_ptr): Add tlsmoff support.
	2004-11-10  Alexandre Oliva  <[email protected]>
	* cgen.c (gas_cgen_parse_operand): Handle
	CGEN_PARSE_OPERAND_SYMBOLIC.
	* config/tc-frv.c (md_cgen_lookup_reloc): Handle TLS relocations.
	(frv_force_relocation): Likewise.  Fix handling of PIC
	relocations.
	(md_apply_fix3): Likewise.

2005-01-21  Ben Elliston  <[email protected]>

	* as.h: Remove #if 0'd code.
	* atof-generic.c (atof_generic): Likewise.
	* ecoff.c (ecoff_directive_frame): Likewise.
	* frags.h (FRAG_APPEND_1_CHAR): Likewise.
	* itbl-ops.c (itbl_add_reg): Likewise.
	* listing.c (calc_hex): Likewise.
	* read.c (MASK_CHAR): Likewise.
	* subsegs.c (subsegs_print_statistics): Likewise.
	* symbols.c (indent): Likewise.
	* write.c (write_relocs): Likewise.
	(write_object_file): Likewise.
	(relax_frag): Likewise.

2005-01-20  Nick Clifton  <[email protected]>

	* as.c (std_longopts): Add an entry for "--a" in order to prevent
	getopt_long_only() from considering -a as an abbreviation for
	--alternate.
	(parse_args): Fix the parsing of -a=<file>.

2005-01-20  Alan Modra  <[email protected]>

	PR gas/684
	* read.c (s_incbin): Adjust default count for skip.  Check validity
	of count and skip rigorously.

2005-01-19  Fred Fish  <[email protected]>

	* config/tc-mips.c (dummy_opcode): Add init for new struct member.

2005-01-19  Richard Sandiford  <[email protected]>

	* read.c (convert_to_bignum): New function, split out from...
	(emit_expr): ...here.  Handle the case where X_add_number is
	positive and the input value is negative.
	(output_big_sleb128): Fix setting of continuation bit.  Check whether
	the final byte needs to be sign-extended.  Fix size-shrinking loop.
	(emit_leb128_expr): When generating a signed leb128, see whether the
	sign of an O_constant's X_add_number matches the sign of the input
	value.  Use a bignum if not.

2005-01-17  Andrew Stubbs  <[email protected]>

	* tc-sh.c (md_begin,md_parse_option): Change arch_sh1_up to
	arch_sh_up in order to match the external name and make the
	testsuite's job easier.

2005-01-14  H.J. Lu  <[email protected]>

	PR 659
	* config/tc-i386.c (i386_scale): Disallow 0 scale.

2005-01-12  Nick Clifton  <[email protected]>

	* config/tc-iq2000.c (s_iq2000_set): Fix thinko parsing
	ignored_arguments array.

2005-01-10  H.J. Lu  <[email protected]>

	* write.c (write_object_file): Disallow a symbol equated to
	common symbol.

2005-01-10  Inderpreet Singh <[email protected]>

	* tc-maxq.c: Replace constants 10 and 20 with bfd_mach_maxq10 and
	bfd_mach_maxq20.
	(md_pseudo_table): Add new pseudo ops for maxq10 and maxq20.
	(maxq_target): New function: Set the machine type.

2005-01-06  Paul Brook  <[email protected]>

	* config/tc-arm.c (FPU_DEFAULT): Define for TE_VXWORKS.
	(md_begin): Handle TE_VXWORKS for FP defaults.
	(md_apply_fix3): Correct rela offsets.
	(elf32_arm_target_format): Add VxWorks targets.

2005-01-06  Paul Brook  <[email protected]>

	* configure.tgt: Set em=vxworks for *-*-vxworks.
	* config/te-vxworks.h: New File.

2005-01-06  Paul Brook  <[email protected]>

	* config/tc-arm.c (arm_cpus): Correct arch field for arm1026ej-s.

2005-01-04  Dmitry Diky  <[email protected]>

	* config/tc-msp430.c (md_apply_fix3): Fix offset calculation for
	global label.

2005-01-03  David Mosberger  <[email protected]>

	* config/tc-ia64.c (md): Add member "loc_directive_seen".
	(dot_loc): New function.
	(md_pseudo_table): Add entry to map .loc to dot_loc().
	(emit_one_bundle): Only call dwarf2_gen_line_info() if we have
	seen a .loc directive or we're generating DWARF2 debug info for
	assembly source.

2004-12-29  Alan Modra  <[email protected]>

	PR gas/619
	* read.c (s_comm_internal): Don't zero end of name until size
	expression has been parsed.

2004-12-25  Marek Michalkiewicz  <[email protected]>

	* config/tc-avr.c (mcu_types): Move attiny{13,2313} from avr4 to avr2.

2004-12-23  Tomer Levi  <[email protected]>

	* config/tc-crx.c: Support 'bcop' relaxation (dealt as in 'cmp&branch'
	case).

2004-12-22  Ian Lance Taylor  <[email protected]>

	* configure.tgt: New.
	* configure.in: Move setting of cpu_type, fmt, etc., to
	configure.tgt.
	* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Add
	$(srcdir)/configure.tgt.
	* configure, Makefile.in: Rebuild.

2004-12-22  Klaus Rudolph  <[email protected]>

	* config/tc-avr.c: Add support for the new R_AVR_LDI, R_AVR_6 and
	R_AVR_6_ADIW relocs for the LDI, ADIW/SBIW and LDD/STD
	instructions.
	(avr_offset_expression): New function to parse offsets for LDI
	instructions.
	(avr_operand): Use it.
	(md_apply_fix3): Generate the relocs.

2004-12-16  Andrew Stubbs  <[email protected]>

	* config/tc-sh64.c (shmedia_md_apply_fix3): Add missing
	BFD_RELOC_SH_IMMS10BY8 relocation.

	* config/tc-sh64.c (shmedia_build_Mytes): Emit an error message rather
	than just ignoring bad code.

2004-12-16  Richard Sandiford  <[email protected]>

	* config/tc-v850.c (handle_lo16): New function.
	(v850_reloc_prefix): Use it to check lo().
	(md_assemble, md_apply_fix3): Handle BFD_RELOC_V850_LO16_SPLIT_OFFSET.

2004-12-14  P.J. Darcy  <[email protected]>

	* configure.in: Add s390x-ibm-tpf support.
	* configure: Regenerate.

2004-12-15 Jan Beulich  <[email protected]>

	* config/obj-elf.c (obj_elf_change_section): Only set type and
	attributes on new sections. Emit warning when type of re-declared
	section doesn't match.

2004-12-15 Jan Beulich  <[email protected]>

	* dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
	'.cfi_startproc simple' doesn't inherit the old value.

2004-12-15  Jan Beulich  <[email protected]>

	* dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
	to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
	generation to emit a factored offset.

2004-12-10  Ian Lance Taylor  <[email protected]>

	* config/tc-mips.c (macro) [M_LA_AB]: Give an error for a offset
	which is too large in the case of NO_PIC without 64-bit
	addresses.

	* config/tc-mips.c (mips_in_shared): New static variable.
	(macro_build_lui): Permit "_gp" if !mips_in_shared.
	(md_longopts): Add -mshared and -mno-shared.
	(md_parse_option): Handle OPTION_MSHARED and OPTION_MNO_SHARED.
	(s_cpload): Implement !mips_in_shared case.
	(s_cpsetup): Likewise.
	* doc/c-mips.texi (MIPS Opts): Document -mno-shared.
	* NEWS: Mention -mno-shared.

2004-12-09  Paul Brook  <[email protected]>

	* config/tc-arm.c (s_arm_unwind_fnend): Use R_ARM_PREL31 relocation
	for function start.

2004-12-09  Ian Lance Taylor  <[email protected]>

	* config/tc-mips.c (append_insn): If we emit a nop during a relax
	sequence, increase the size of the sequence.

	* config/tc-mips.c (mips_cpu_info_table): Change "9000" entry to
	use CPU_RM9000.

2004-12-07  Ben Elliston  <[email protected]>

	* read.c (s_align): Use an align_limit temporary to allay a GCC
	signed/unsigned comparison warning.

2004-12-01  Mark Mitchell  <[email protected]>

	* Makefile.am (TARG_ENV_HFILES): Add te-armlinuxeabi.h.
	* configure.in: Use it for arm*-*-linux-gnueabi*.
	* config/tc-arm.c: Allow emulation file to set FPU_DEFAULT.
	* config/te-armlinuxeabi.h: New file.
	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Regenerated.

2004-12-02  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_switch_section_emit_state): Use subseg_set.
	(xtensa_restore_emit_state): Likewise.

2004-12-02  Alan Modra  <[email protected]>

	* read.c (ALIGN_LIMIT): Define, increasing limit for BFD_ASSEMBLER.
	(s_align): Use it.

2004-11-30  Tero Niemela  <[email protected]>

	* Makefile.am: Change LOCALEDIR to $(datadir)/share.
	* Makefile.in: Regenerate.

2004-11-29  Tomer Levi  <[email protected]>

	* config/tc-crx.c: Major code cleanup. Remove unused variables and
	functions, give functions a meaningful name, add comments.
	(check_range): New function - Replace operand size calculation
	with range checking.
	(assemble_insn): Update Algorithm, improve error issuing.
	(enum op_err): New.
	(process_label_constant): Bug fix regarding COP_BRANCH_INS relocation
	handling.

2004-11-29  Kazuhiro Inaoka <[email protected]>

	* config/tc-m32r.c (md_pcrel_from_section): Fixed a pcrel relocte
	miss between different section in the same module.
	(tc_gen_reloc): Likewise.

2004-11-25  Theodore A. Roth  <[email protected]>

	* gas/config/tc-avr.c (mcu_types): Add support for atmega165,
	atmega325, atmega3250, atmega645 and atmega6450.

2004-11-25 Jan Beulich  <[email protected]>

	* config/tc-i386.c (optimize_imm): Adjust immediates to only those
	permissible for the selected instruction suffix.
	(process_suffix): For DefaultSize instructions, suppressing the
	guessing of a 'q' suffix if the instruction doesn't support it is
	pointless, because only an 'l' suffix can be guessed in this place.

2004-11-24  Nick Clifton  <[email protected]>

	* config/tc-iq2000.c: Remove support for IQ10 processor.
	Convert to ISO C90 formatting.
	* config/tc-iq2000.h: Likewise.

2004-11-23  Nick Clifton  <[email protected]>

	* config/tc-mn10300.c (md_relax_table): More fixes to the offsets
	in this table.  They should be correct now.

2004-11-23 Jan Beulich <[email protected]>

	* config/tc-i386.h (CpuMMX2): Declare. Artificial classifier to
	indicate the MMX extensions added by both SSE and 3DNow!A.
	(Cpu3dnowA): Declare.
	(CpuUnknownFlags): Update.
	* config/tc-i386.c (cpu_sub_arch_name): Declare.
	(cpu_arch): i586 and pentium do not imply MMX. i686 and pentiumpro do
	neither imply SSE nor MMX. k6 implies MMX. k6_2 additionally implies
	3DNow!. Athlon additionally implies 3DNow!A. Several new
	entries (those starting with a dot are for sub-arch specification).
	(set_cpu_arch): Handle sub-arch specifications.
	(parse_insn): Distinguish between instructions not supported because
	of insufficient CPU features and because of 64-bit mode.
	* doc/c-i386.texi: Describe enhanced .arch directive.

2004-11-22  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xg_add_opcode_fix): Set fx_no_overflow.

2004-11-22  Bob Wilson  <[email protected]>

	* dwarf2dbg.c (dwarf2_finish): Don't write a .debug_line section
	without a corresponding .debug_info section.

2004-11-22  Hans-Peter Nilsson  <[email protected]>

	* read.c (potable): Add "error" and "warning".
	(s_errwarn): New function.
	* read.h (s_errwarn): Declare.
	* doc/as.texinfo (Error, Warning): Document .error and .warning.

2004-11-22  Nick Clifton  <[email protected]>

	* config/tc-tic54x.c (tic54x_adjust_symtab): Adjust call to
	c_dot_file_symbol.

2004-11-19  Alan Modra  <[email protected]>

	* config/tc-msp430.c (struct rcodes_s, MSP430_RLC, msp430_rcodes,
	struct hcodes_s, msp430_hcodes): From include/opcode/msp430.h.

2004-11-19  Alan Modra  <[email protected]>

	* config/obj-coff.c (c_dot_file_symbol): Add "app" param.
	(coff_adjust_symtab): Adjust call.
	(crawl_symbols): Likewise.
	* config/obj-coff.h (c_dot_file_symbol): Add "app" param.
	(obj_app_file): Adjust.

2004-11-18  Inderpreet Singh   <[email protected]>

	* configure.in: Enable bfd_assember for the MAXQ port.
	* configure: Regenerate.

2004-11-12  Bob Wilson  <[email protected]>
	    Sterling Augustine  <[email protected]>

	* config/tc-xtensa.c (finish_vinsn): Clear pending instruction if
	there is a conflict.
	(check_t1_t2_reads_and_writes): Check for both reads and writes to
	interfaces that are related as determined by xtensa_interface_class_id.

2004-11-12  Nick Clifton  <[email protected]>

	* config/tc-mn10300.c (md_relax_table): Fix off by one negative
	offsets for conditional branches.

2004-11-11  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (MAX_IMMED6): Change value to 65.

2004-11-10  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (update_next_frag_state): Always add a NOP if
	relaxing at the end of a loop.  Don't mark frags as UNREACHABLE or
	MAYBE_UNREACHABLE.
	(relax_frag_immed): Update call to update_next_frag_state.

2004-11-10  Alan Modra  <[email protected]>

	* obj.h (struct format_ops <app_file>): Add int param.
	* read.h (s_app_file_string): Likewise.
	* read.c (s_app_file_string): Likewise.
	(s_app_file): Adjust s_app_file_string call.
	* config/tc-mips.c (s_mips_file): Likewise.
	* config/obj-coff.h (obj_app_file): Add app param.
	* config/obj-ecoff.h (obj_app_file): Likewise.
	* config/obj-multi.h (obj_app_file): Likewise.
	* config/obj-elf.h (elf_file_symbol): Likewise.
	* config/obj-elf.c (elf_file_symbol): Only emit one file symbol
	if called for # preprocessor lines.

2004-11-08  H.J. Lu  <[email protected]>

	PR 528
	* symbols.c (resolve_symbol_value): Convert weak symbols only
	for Windows PECOFF.
	(symbol_equated_reloc_p): Don't equate weaks when relocating
	only for Windows PECOFF.

2004-11-08  Tomer Levi  <[email protected]>

	* config/tc-crx.c (print_insn): Check and set insn_addr.
	* config/tc-crx.h (md_frag_check): Define.

2004-11-08  Inderpreet Singh   <[email protected]>
	    Vineet Sharma      <[email protected]>

	* configure.in: Add support for new target maxq-coff.
	* configure: Regenerate.
	* NEWS: Mention new support.
	* config/tc-maxq.c: New file.
	* config/tc-maxq.h: New file.
	* config/obj-coff.h: Add support for maxq-coff.

2004-11-08  Aaron W. LaFramboise <[email protected]>

	* symbols.c (any_external_name): Define.
	(resolve_symbol_value): Convert weak symbols.
	(S_SET_EXTERNAL): Support any_external_name.
	(S_SET_NAME): Qualify parameter const.
	(symbol_equated_reloc_p): Equate to weaks when relocating.
	* symbols.h (S_SET_NAME): Qualfiy parameter const.
	* tc.h (any_external_name): Declare.
	* config/obj-coff.c ("coff/pe.h"): Include for BFD
	assemblers also.
	(weak_is_altname): Declare and define.
	(weak_name2altname): Same.
	(weak_altname2name): Same.
	(weak_uniquify): Same.
	(weak_altprefix): Define.
	(obj_coff_weak): Change .weak syntax and handling.
	(coff_frob_symbol): Fix PE weak symbol alternates.
	* config/obj-coff.h (USE_UNIQUE): Define.
	* config/tc-i386.c (md_apply_fix3): Assume weak symbols
	are in another segment.
	(tc_gen_reloc): Remove broken addend hack.
	doc/as.texinfo: Update.

2004-11-05  Sterling Augustine  <[email protected]>

	* config/tc-xtensa.c (total_frag_text_expansion): New.
	(md_estimate_size_before_relax): Use it.
	(find_address_of_next_align_frag): Likewise.

2004-11-05  Tomer Levi  <[email protected]>

	* config/tc-crx.c: Rename argument types.
	(processing_arg_number): Rename to 'cur_arg_num'.
	(get_number_of_bits): Rename to 'set_operand_size'.
	(get_operandtype): Rename to 'parse_operand', totally rewrite.
	(set_cons_rparams): Rename to 'set_operand', totally rewrite.
	(set_indexmode_parameters): Remove function, integrate its code into
	'set_operand'.
	(set_operand_size): Get rid of 'Operand Number' function parameter -
	use global variable 'cur_arg_num' instead.
	Use a local 'argument' pointer to reference the current argument.
	(parse_operand): Likewise.
	(set_operand): Likewise.
	(process_label_constant): Likewise.

2004-11-04  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c: Remove XTENSA_SECTION_RENAME ifdefs.
	(add_section_rename): Delete.  Inlined into...
	(build_section_rename): ...here.  Use xstrdup instead of strdup.
	(xtensa_section_rename): Drop "const" from argument and return types.
	(md_show_usage): Indent to match show_usage().
	* config/tc-xtensa.h: Remove XTENSA_SECTION_RENAME ifdefs.
	(tc_canonicalize_section_name): Define.
	(md_elf_section_rename): Remove unused macro.
	* doc/as.texinfo (Overview): Document Xtensa --rename-section option.
	* doc/c-xtensa.texi (Xtensa Options): Likewise.
	(Frame Directive): Delete.

2004-11-04  Daniel Jacobowitz  <[email protected]>

	* configure.in: Remove arm-*-oabi and thumb-*-oabi.
	* config/tc-arm.c (target_oabi): Delete.
	(md_apply_fix3, elf32_arm_target_format): Remove target_oabi checks.
	(arm_opts): Remove moabi.
	* doc/as.texinfo (Overview): Remove documentation of -moabi.
	* doc/c-arm.texi (ARM Options): Likewise.
	* configure: Regenerated.

2004-11-04  Hans-Peter Nilsson  <[email protected]>

	* configure.in (crisv32): Recognize.  AC_DEFINE_UNQUOTED
	DEFAULT_CRIS_ARCH.  Handle crisv32-*-linux-gnu* like
	cris-*-linux-gnu* and crisv32-*-* like cris-*-*.
	* configure: Regenerate.
	* config/tc-cris.c (enum cris_archs): New.
	(cris_mach, cris_arch_from_string, s_cris_arch, get_sup_reg)
	(cris_insn_ver_valid_for_arch): New functions.
	(DEFAULT_CRIS_ARCH): New macro, default to cris_any_v0_v10.
	(cris_arch): New variable.
	(md_pseudo_table): New pseudo .arch.
	(err_for_dangerous_mul_placement): Initialize according to
	DEFAULT_CRIS_ARCH.
	(STATE_COND_BRANCH): Renamed from STATE_CONDITIONAL_BRANCH.
	All users changed.
	(STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON)
	(STATE_ABS_BRANCH_V32, STATE_LAPC, BRANCH_BF_V32, BRANCH_BB_V32)
	(BRANCH_WF_V32, BRANCH_WB_V32): New.
	(BRANCH_BF, BRANCH_BB, BRANCH_WF, BRANCH_WB): Don't undef after
	use in md_cris_relax_table.
	(md_cris_relax_table): Add entries for STATE_COND_BRANCH_V32,
	STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
	Update and improve head comment.
	(OPTION_PIC): Define in terms of previous option, OPTION_US.
	(OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): Similar.
	(OPTION_ARCH): New.
	(md_longopts): New option --march=...
	(cris_any_v0_v10_long_jump_size, crisv32_long_jump_size): New
	macros.
	(md_long_jump_size): Initialize in terms of DEFAULT_CRIS_ARCH.
	(HANDLE_RELAXABLE): New macro.
	(md_estimate_size_before_relax): Use HANDLE_RELAXABLE for common
	cases.  Check for weak symbols and assume not relaxable.  Handle
	STATE_COND_BRANCH_V32, STATE_COND_BRANCH_COMMON,
	STATE_ABS_BRANCH_V32, STATE_LAPC.  Use new variable symbolP, not
	fragP->fr_symbol.
	(md_convert_frag): Handle STATE_COND_BRANCH_V32,
	STATE_COND_BRANCH_COMMON, STATE_ABS_BRANCH_V32, STATE_LAPC.
	(cris_create_short_jump): Adjust for CRISv32.
	(cris_relax_frag): Handle new states.
	(md_create_long_jump): Ditto.  Emit error for common_v10_v32.
	(md_begin): Define symbols "..asm.arch.cris.v32",
	"..asm.arch.cris.v10", "..asm.arch.cris.common_v10_v32" and
	"..asm.arch.cris.any_v0_v10".  Use cris_insn_ver_valid_for_arch
	when entering opcode table entry points.
	(md_assemble): Adjust branch handling for CRISv32.  Handle LAPC
	relaxation.  In fix_new_exp call for main insn, pass 1 for pcrel
	parameter for 8, 16 and 32-bit pc-relative insns and LAPC.
	(cris_process_instruction): Initialize out_insnp->insn_type to
	CRIS_INSN_NONE, not CRIS_INSN_NORMAL.
	<case ']', '[', 'A', 'd', 'Q', 'N', 'n', 'Y', 'U', 'u', 'T'>: New
	cases.
	<case 'm'>: Check that modified_char == '.'.
	<invalid operands>: Consume the rest of the line.
	When operands don't match, skip over subsequent insns with
	non-matching version specifier but same mnemonic.
	<immediate constant, case SIZE_SPEC_REG>: Immediate operands for
	special registers in CRISv32 are always 32 bit long.
	<immediate constant, case SIZE_FIELD_SIGNED, SIZE_FIELD_UNSIGNED>:
	New cases.
	(get_gen_reg): Only recognize "PC" when followed by "+]" for v32
	and compatible.  Recognize "ACR" for v32, unless followed by "+".
	(get_spec_reg): Consider cris_arch when looking up register.
	(get_autoinc_prefix_or_indir_op): Don't recognize assignment for
	v32 or compatible.
	(get_3op_or_dip_prefix_op): Check for ']' after seeing '[rN+'.
	(cris_get_expression): Restore input_line_pointer if failing "early".
	(get_flags): Consider cris_arch and recognize flags accordingly.
	(branch_disp): Adjust for CRISv32.
	(gen_cond_branch_32): Similar.  Emit error for common_v10_v32.
	(cris_number_to_imm): Use as_bad_where, not as_bad.  Remove
	related FIXME.  Don't insist on BFD_RELOC_32_PCREL fixup to be
	resolved.  Don't enter zeros in object file for
	BFD_RELOC_32_PCREL.
	<case BFD_RELOC_CRIS_LAPCQ_OFFSET, BFD_RELOC_CRIS_SIGNED_16>
	<case BFD_RELOC_CRIS_SIGNED_8>: New case.
	(md_parse_option): Break out "return 1".
	<OPTION_ARCH> New case.
	(tc_gen_reloc): <case BFD_RELOC_CRIS_LAPCQ_OFFSET>
	<case BFD_RELOC_CRIS_SIGNED_16, BFD_RELOC_CRIS_SIGNED_8>
	<case BFD_RELOC_CRIS_UNSIGNED_8, BFD_RELOC_CRIS_UNSIGNED_16>
	<case BFD_RELOC_32_PCREL>: New cases.
	Addends for non-zero fx_pcrel are too in fx_offset.
	(md_show_usage): Show --march=<arch>.
	(md_apply_fix3): Adjust val for BFD_RELOC_CRIS_LAPCQ_OFFSET.
	(md_pcrel_from): BFD_RELOC_CRIS_LAPCQ_OFFSET is PC-relative too.
	(s_syntax) <struct syntaxes>: Properly constify member operand.
	* config/tc-cris.h (TARGET_MACH): Define.
	(cris_mach): Declare.
	* doc/as.texinfo (Overview) <CRIS>: Add --march=...
	* doc/c-cris.texi (CRIS-Symbols): New node for built-in symbols.
	(CRIS-Opts): Document --march=...
	(CRIS-Pseudos): Document .arch.

2004-11-04 Jan Beulich <[email protected]>

	* config/tc-i386.c (set_intel_syntax): Allow % in symbol names when
	intel syntax and no register prefix, allow $ in symbol names when
	intel syntax.
	(set_16bit_gcc_code_flag): Replace literal 'l' by LONG_MNEM_SUFFIX.
	(intel_float_operand): Add fourth return value indicating math control
	operations. Make classification more precise.
	(md_assemble): Complain if memory operand of mov[sz]x has no size
	specified.
	(parse_insn): Translate word operands to floating point instructions
	operating on integers as well as control instructions to short ones
	as expected by AT&T syntax. Translate 'd' suffix to short one only for
	floating point instructions operating on non-integer operands.
	(match_template): Remove fldcw special case. Adjust q-suffix handling
	to permit it on fild/fistp/fisttp in AT&T mode.
	(process_suffix): Don't guess DefaultSize insns' suffix from
	stackop_size for certain floating point control instructions. Guess
	suffix for branch and [ls][gi]dt based on flag_code. Split error
	messages for Intel and AT&T syntax, and make the condition more strict
	for the former. Adjust suppressing of generation of operand size
	overrides.
	(intel parser): Allow the full set of MASM operators. Add FWORD, TBYTE,
	OWORD, and XMMWORD operand size specifiers (TBYTE replaces XWORD). Add
	more error checking.
	* config/tc-i386.h (BYTE_PTR WORD_PTR DWORD_PTR QWORD_PTR XWORD_PTR
	SHORT OFFSET_FLAT FLAT NONE_FOUND): Remove unused defines.

2004-11-03  Hans-Peter Nilsson  <[email protected]>

	* symbols.c (colon) [!WORKING_DOT_WORD]: Don't declare
	md_short_jump_size, md_long_jump_size.
	* write.c [!WORKING_DOT_WORD]: Ditto.
	* tc.h [!WORKING_DOT_WORD]: Declare them here.  Drop const
	qualifier.
	* config/tc-cris.h (md_short_jump_size, md_long_jump_size): Don't
	declare.
	* config/tc-cris.c (md_short_jump_size, md_long_jump_size): Drop
	const qualifier in these definitions.
	* config/tc-i370.c, config/tc-m68k.c, config/tc-pdp11.c,
	config/tc-s390.c, config/tc-tahoe.c, config/tc-vax.c: Ditto.

2004-11-02  Nick Clifton  <[email protected]>

	* dwarf2dbg.c (dwarf2_finish): Check for the existence of a file
	table before deciding to produce a .debug_line section to match up
	with a user provided .debug_info section.

2004-10-28  Tomer Levi  <[email protected]>

	* config/tc-crx.c (getreg_image): Bug fix, a return value was
	mistakenly omitted from CRX_C_REGTYPE and CRX_CS_REGTYPE cases.

2004-10-27  Tomer Levi  <[email protected]>

	* config/tc-crx.c: Remove global variable 'post_inc_mode'.
	(get_flags): New function.
	(get_number_of_bits): Edit comments, update numeric values to
	supported sizes.
	(process_label_constant): Don't support the colon
	format (SYMBOL:[s|m|l]).
	(set_cons_rparams): Support argument type 'arg_rbase'.
	(get_operandtype): Bug fix in 'rbase' operand type parsing.
	(handle_LoadStor): Bug fix, first handle post-increment mode.
	(getreg_image): Remove redundant code, update according to latest
	CRX spec.
	(print_constant): Bug fix relate to 3-word instructions.
	(assemble_insn): Bug fix, when matching instructions, verify also
	instruction type (not only mnemonic).
	Add various error checking.
	(preprocess_reglist): Support HI/LO and user registers.

2004-10-25  David Mosberger-Tang  <[email protected]>

	* config/tc-ia64.c (fixup_unw_records): Don't let the "t" value
	in an epilogue directive go negative.

2004-10-25  H.J. Lu  <[email protected]>

	PR 474
	* config/tc-ia64.c (emit_one_bundle): Decrement md.num_slots_in_use
	after reporting template error during manual bundling. Reported
	by Michael Dupont, [email protected].

2004-10-25  Daniel Jacobowitz  <[email protected]>

	* Makefile.am: Run dep-am.
	* aclocal.m4: Regenerate with automake 1.9.2.
	* Makefile.in: Regenerate with automake 1.9.2.
	* doc/Makefile.in: Likewise.

	* config/tc-arm.c: Include "dw2gencfi.h".
	(tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
	New functions.
	* config/tc-arm.h (TARGET_USE_CFIPOP, DWARF2_DEFAULT_RETURN_COLUMN)
	(DWARF2_CIE_DATA_ALIGNMENT, tc_regname_to_dw2regnum)
	(tc_cfi_frame_initial_instructions): Define.
	(tc_arm_regname_to_dw2regnum, tc_arm_frame_initial_instructions):
	Add prototypes.

2004-10-21  Tomer Levi  <[email protected]>

	* config/tc-crx.c (assemble_insn): Check unsigned immediate
	operands validity.
	Update coprocessor id to be unsigned immediate.

2004-10-18  Aaron W. LaFramboise <[email protected]>

	* config/tc-i386.c (O_secrel): Delete.
	(tc_pe_dwarf2_emit_offset): New function.
	* config/tc-i386.h (O_secrel): Define as O_md1.
	(TC_DWARF2_EMIT_OFFSET): Define.

2004-10-18  Nick Clifton  <[email protected]>

	* config/tc-xstormy16.c (xstormy16_cons_fix_new): Accept and
	ignore @fptr() directives for 4-byte fixups.

2004-10-15  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am"
	* Makefile.in: Regenerate.

2004-10-14  Bob Wilson  <[email protected]>

	* doc/c-xtensa.texi (Xtensa Options, Absolute Literals Directive):
	Remove comments about placement of literal pools.
	(Literal Directive): Update description of literal placement.
	(Literal Prefix Directive): Remove statement that this does not apply
	to absolute-mode literals.  Describe new section naming scheme.

2004-10-12  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_frequency_pseudo): Use set_subseg_freq.
	(is_entry_opcode, is_movi_opcode, is_the_loop_opcode, is_jx_opcode,
	is_windowed_return_opcode): Delete.
	(xtensa_frob_label): Use get_subseg_target_freq.
	(md_assemble): Inline call to is_entry_opcode.
	(xtensa_handle_align): Inline call to get_frag_is_literal.
	(relaxation_requirements): Inline call to is_jx_opcode.
	(emit_single_op): Inline call to is_movi_opcode.
	(xg_assemble_vliw_tokens): Inline calls to get_frag_is_insn,
	get_frag_is_no_transform, is_entry_opcode, and
	set_frag_is_specific_opcode.  Use get_subseg_total_freq.
	(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags,
	xtensa_fix_close_loop_end_frags, relax_frag_immed, convert_frag_immed):
	Inline calls to get_frag_is_no_transform.
	(next_instrs_are_b_retw): Inline call to is_windowed_return_opcode.
	(xtensa_fix_short_loop_frags): Inline calls to is_the_loop_opcode and
	get_frag_is_no_transform.
	(convert_frag_immed_finish_loop): Inline calls to get_expression_value
	and set_frag_is_no_transform.
	(get_expression_value): Delete.
	(subseg_map struct): Rename cur_total_freq to total_freq.  Rename
	cur_target_freq to target_freq.
	(get_subseg_info): Split out code to create a new map entry into ...
	(add_subseg_info): ... this new function.
	(get_last_insn_flags): Check if get_subseg_info succeeded.
	(set_last_insn_flags): Call add_subseg_info if needed.
	(get_subseg_total_freq, get_subseg_target_freq, set_subseg_freq): New.
	(xtensa_reorder_segments): Compute last_sec while counting sections.
	Remove call to get_last_sec.
	(get_last_sec): Delete.
	(cache_literal_section): Inline call to retrieve_literal_seg and its
	callees, seg_present and add_seg_list.
	(retrieve_literal_seg, seg_present, add_seg_list): Delete.
	(get_frag_is_insn, get_frag_is_no_transform,
	set_frag_is_specific_opcode, set_frag_is_no_transform): Delete.
	* config/tc-xtensa.h (MAX_SLOTS): Reduce from 31 to 15.

2004-10-12  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c: Use ISO C90 formatting.
	* config/tc-xtensa.h: Likewise.
	* config/xtensa-istack.h: Likewise.
	* config/xtensa-relax.c: Likewise.
	* config/xtensa-relax.h: Likewise.

2004-10-12  Paul Brook  <[email protected]>

	* config/tc-arm.c (md_begin): Change EF_ARM_EABI_VER3 to
	EF_ARM_EABI_VER4.
	(arm_eabis): Ditto.
	* doc/c-arm.texi: Document that we actually support -meabi=4, not
	-meabi=3.

2004-10-08  Bob Wilson  <[email protected]>

	* doc/as.texinfo (VTableEntry, VTableInherit): Add "directive" to index
	entries.
	(Acknowledgements): Use "GAS" instead of AS variable.

2004-10-08  Daniel Jacobowitz  <[email protected]>

	* config/tc-i386.c: Include "elf/x86-64.h".
	(i386_elf_section_type): New function.
	* config/tc-i386.h (md_elf_section_type): Define.
	(i386_elf_section_type): New prototype.

2004-10-08  Linus Nielsen Feltzing  <[email protected]>

	* config/m68k-parse.h (enum m68k_register): New control register,
	MBAR2 (for MCF5249)
	* config/tc-m68k.c: Correct control register set for MCF5249.

2004-10-07  Bob Wilson  <[email protected]>
	    Sterling Augustine  <[email protected]>

	* config/tc-xtensa.c (absolute_literals_supported): New global flag.
	(UNREACHABLE_MAX_WIDTH): Define.
	(XTENSA_FETCH_WIDTH): Delete.
	(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
	prefer_const16, prefer_l32r): New global variables.
	(LIT4_SECTION_NAME): Define.
	(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
	(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
	(frag_flags struct): New.
	(xtensa_block_info struct): Move from tc-xtensa.h.  Add flags field.
	(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
	(bitfield, bit_is_set, set_bit, clear_bit): Define.
	(MAX_FORMATS): Define.
	(op_placement_info struct, op_placement_table): New.
	(O_pltrel, O_hi16, O_lo16): Define.
	(directiveE enum): Rename directive_generics to directive_transform.
	Delete directive_relax.  Add directive_schedule,
	directive_absolute_literals, and directive_last_directive.
	(directive_info): Rename "generics" to "transform".  Delete "relax".
	Add "schedule" and "absolute-literals".
	(directive_state): Adjust entries to match changes in directive_info.
	(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
	(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
	xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
	(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
	(align_only_targets, software_a0_b_retw_interlock,
	software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
	software_avoid_short_loop, software_avoid_close_loop_end,
	software_avoid_all_short_loops, specific_opcode): Delete.
	(warn_unaligned_branch_targets): New.
	(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
	workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
	(option_[no_]link_relax, option_[no_]transform,
	option_[no_]absolute_literals, option_warn_unaligned_targets,
	option_prefer_l32r, option_prefer_const16, option_target_hardware):
	New enum values.
	(option_[no_]align_only_targets, option_literal_section_name,
	option_text_section_name, option_data_section_name,
	option_bss_section_name, option_eb, option_el): Delete.
	(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
	warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
	and target-hardware.  Delete entries for [no-]target-align-only,
	literal-section-name, text-section-name, data-section-name, and
	bss-section-name.
	(md_parse_option): Handle new options and remove old ones.  Accept but
	ignore [no-]density options.  Warn for [no-]generics and [no-]relax
	and treat them as [no-]transform.
	(md_show_usage): Add new options and remove old ones.
	(xtensa_setup_hw_workarounds): New.
	(md_pseudo_table): Change "word" entry to use xtensa_elf_cons.  Add
	"long", "short", "loc" and "frequency" entries.
	(use_generics): Rename to ...
	(use_transform): ... this function.  Add past_xtensa_end check.
	(use_longcalls): Add past_xtensa_end check.
	(code_density_available, can_relax): Delete.
	(do_align_targets): New.
	(get_directive): Accept dashes in directive names.  Warn about
	[no-]generics and [no-]relax directives and treat them as
	[no-]transform.
	(xtensa_begin_directive): Call md_flush_pending_output only for some
	directives.  Check for directives inside instruction bundles.  Warn
	about deprecated ".begin literal" usage.  Warn and ignore [no-]density
	directives.  Handle new directives.  Check generating_literals flag
	for literal_prefix.
	(xtensa_end_directive): Check for directives inside instruction
	bundles.  Warn and ignore [no-]density directives.  Handle new
	directives.  Call xtensa_set_frag_assembly_state.
	(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
	xtensa_dwarf2_emit_insn): New.
	(xtensa_literal_position): Call md_flush_pending_output.  Do not check
	use_literal_section flag.
	(xtensa_literal_pseudo): Call md_flush_pending_output.  Handle absolute
	literals.  Use xtensa_elf_cons to parse the expression.
	(xtensa_literal_prefix): Do not check use_literal_section.  Support
	".lit4" sections for absolute literals.  Change prefix convention to
	replace ".text" (or ".t" in a linkonce section).  No need to call
	subseg_set.
	(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
	(expression_end): Handle closing braces and colons.
	(PLT_SUFFIX, plt_suffix): Delete.
	(expression_maybe_register): Use new xtensa-isa.h functions.  Use
	xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
	and O_hi16 expressions as well.
	(tokenize_arguments): Handle closing braces and colons.
	(parse_arguments): Use new xtensa-isa.h functions.  Handle "invisible"
	operands and paired register syntax.
	(get_invisible_operands): New.
	(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax.  Use
	new xtensa-isa.h functions.
	(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
	(xg_translate_idioms): Check if inside bundle.  Use use_transform.
	Handle new Xtensa LX RSR/WSR/XSR syntax.  Remove code to widen density
	instructions.  Use xtensa_translate_zero_immed.
	(operand_is_immed, operand_is_pcrel_label): Delete.
	(get_relaxable_immed): Use new xtensa-isa.h functions.
	(get_opcode_from_buf): Add slot parameter.  Use new xtensa-isa.h
	functions.
	(xtensa_print_insn_table, print_vliw_insn): New.
	(is_direct_call_opcode): Use new xtensa-isa.h functions.
	(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
	is_branch_or_jump_opcode): Delete.
	(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
	(opnum_to_reloc, reloc_to_opnum): Delete.
	(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
	xtensa-isa.h functions.  Operate on one slot of an instruction.
	(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
	xg_get_insn_size): Delete.
	(xg_get_build_instr_size): Use xg_get_single_size.
	(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_get_max_narrow_insn_size): Delete.
	(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
	xg_is_relaxable_insn): Update calls to xg_build_widen_table.  Use
	xg_get_single_size.
	(xg_build_to_insn): Record the loc field.  Handle OP_OPERAND_HI16U and
	OP_OPERAND_LOW16U.  Check xg_valid_literal_expression.
	(xg_expand_to_stack, xg_expand_narrow): Update calls to
	xg_build_widen_table.  Use xg_get_single_size.
	(xg_immeds_fit): Use new xtensa-isa.h functions.  Update call to
	xg_check_operand.
	(xg_symbolic_immeds_fit): Likewise.  Also handle O_lo16 and O_hi16, and
	treat weak symbols conservatively.
	(xg_check_operand): Use new xtensa-isa.h functions.
	(is_dnrange): Delete.
	(xg_assembly_relax): Inline previous calls to tinsn_copy.
	(xg_finish_frag): Specify separate relax states for the frag and slot0.
	(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
	xtensa-isa.h functions.
	(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
	xg_instruction_matches_options): New.
	(xg_instruction_matches_rule): Handle O_register expressions.  Call
	xg_instruction_matches_options.
	(transition_rule_cmp): New.
	(xg_instruction_match): Update call to xg_build_simplify_table.
	(xg_build_token_insn): Record loc fields.
	(xg_simplify_insn): Check is_specific_opcode field and
	density_supported flag.
	(xg_expand_assembly_insn): Skip checking code_density_available.  Use
	new xtensa-isa.h functions.  Call use_transform instead of can_relax.
	(xg_assemble_literal): Add error handling for O_big.  Call
	record_alignment.  Handle O_pltrel.
	(xg_valid_literal_expression): New.
	(xg_assemble_literal_space): Add slot parameter.  Remove call to
	set_expr_symbol_offset.  Add call to record_alignment.  Update call to
	xg_finish_frag.
	(xg_emit_insn): Delete.
	(xg_emit_insn_to_buf): Add format parameter.  Update calls to
	xg_add_opcode_fix and xtensa_insnbuf_to_chars.
	(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
	and slot parameters.  Handle new "alternate" relocations for absolute
	literals and CONST16 instructions.  Check for bad uses of O_lo16 and
	O_hi16.  Use new xtensa-isa.h functions.
	(xg_assemble_tokens): Delete.
	(is_register_writer): Use new xtensa-isa.h functions.
	(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
	old-style RSR from LCOUNT.
	(next_frag_opcode): Delete.
	(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
	update_next_frag_state): New.
	(update_next_frag_nop_state): Delete.
	(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
	(xtensa_mark_literal_pool_location): Check use_literal_section flag and
	the state of the absolute-literals directive.  Add calls to
	record_alignment and xtensa_set_frag_assembly_state.  Call
	xtensa_switch_to_non_abs_literal_fragment instead of
	xtensa_switch_to_literal_fragment.
	(build_nop): New.
	(assemble_nop): Use build_nop.  Update call to xtensa_insnbuf_to_chars.
	(get_expanded_loop_offset): Change check for undefined opcode to an
	assertion.
	(xtensa_set_frag_assembly_state, relaxable_section,
	xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
	xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
	(md_begin): Update call to xtensa_isa_init.  Initialize linkrelax to 1.
	Set lit4_seg_name.  Call xg_init_vinsn.  Initialize new global opcodes.
	Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
	(xtensa_init_fix_data): New.
	(xtensa_frob_label): Reset label symbol to the current frag.  Check
	do_align_targets and generating_literals flag.  Propagate frequency
	info to new alignment frag.  Call xtensa_set_frag_assembly_state.
	(xtensa_unrecognized_line): New.
	(xtensa_flush_pending_output): Check if inside a bundle.  Add a call
	to xtensa_set_frag_assembly_state.
	(error_reset_cur_vinsn): New.
	(md_assemble): Remove check for literal frag.  Remove call to
	istack_init.  Call use_transform instead of use_generics.  Parse
	explicit instruction format specifiers.  Move code for
	a0_b_retw_interlock workaround to xg_assemble_vliw_tokens.  Call
	error_reset_cur_vinsn on errors.  Add call to get_invisible_operands.
	Add dwarf2_where call.  Remote automatic alignment for ENTRY
	instructions.  Move call to xtensa_clear_insn_labels to the end.
	Rearrange to handle bundles.
	(xtensa_cons_fix_new): Delete.
	(xtensa_handle_align): New.
	(xtensa_frag_init): Call xtensa_set_frag_assembly_state.  Remove
	assignment to is_no_density field.
	(md_pcrel_from): Use new xtensa-isa.h functions.  Use decode_reloc
	instead of reloc_to_opnum.  Handle "alternate" relocations.
	(xtensa_force_relocation, xtensa_check_inside_bundle,
	xtensa_elf_section_change_hook): New.
	(xtensa_symbol_new_hook): Delete.
	(xtensa_fix_adjustable): Check for difference of symbols with an
	offset.  Check for external and weak symbols.
	(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
	(md_estimate_size_before_relax): Return expansion for the first slot.
	(tc_gen_reloc): Handle difference of symbols by producing
	XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
	into the output.  Handle new XTENSA_SLOT*_OP relocs by storing the
	tentative values into the output when linkrelax is set.
	(XTENSA_PROP_SEC_NAME): Define.
	(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
	Create literal tables only if using literal sections.  Create new
	property tables instead of old instruction tables.  Check for unaligned
	branch targets and loops.
	(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
	new_resource_table, clear_resource_table, resize_resource_table,
	resources_available, reserve_resources, release_resources,
	opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
	resources_conflict, xg_find_narrowest_format, relaxation_requirements,
	bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
	(xtensa_end): Call xtensa_flush_pending_output.  Set past_xtensa_end
	flag.  Update checks for workaround options.  Call
	xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
	(xtensa_cleanup_align_frags): Add special case for branch targets.
	Check for and mark unreachable frags.
	(xtensa_fix_target_frags): Remove use of align_only_targets flag.
	Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
	end of a zero-overhead loop body.
	(frag_can_negate_branch): Handle instructions with multiple slots.
	Use new xtensa-isa.h functions
	(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
	xtensa_mark_zcl_first_insns): New.
	(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
	transformations are disabled.
	(next_instrs_are_b_retw): Use new xtensa-isa.h functions.  Handle
	multislot instructions.
	(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
	Likewise.  Also error if transformations are disabled.
	(unrelaxed_frag_max_size): New.
	(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
	xtensa-isa.h functions.
	(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
	xtensa_opcode_is_loop instead of is_loop_opcode.
	(get_text_align_power): Replace as_fatal with assertion.
	(get_text_align_fill_size): Iterate instead of using modulus when
	use_nops is false.
	(get_noop_aligned_address): Assert that this is for a machine-dependent
	RELAX_ALIGN_NEXT_OPCODE frag.  Use next_frag_opcode_is_loop,
	xg_get_single_size, and frag_format_size.
	(get_widen_aligned_address): Rename to ...
	(get_aligned_diff): ... this function.  Add max_diff parameter.
	Remove handling of rs_align/rs_align_code frags.  Use
	next_frag_format_size, get_text_align_power, get_text_align_fill_size,
	next_frag_opcode_is_loop, and xg_get_single_size.  Compute max_diff
	and pass it back to caller.
	(xtensa_relax_frag): Use relax_frag_loop_align.  Add code for new
	RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
	RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types.  Check relax_seen.
	(relax_frag_text_align): Rename to ...
	(relax_frag_loop_align): ... this function.  Assume loops can only be
	in the first slot of an instruction.
	(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
	instruction.  Remove call to frag_wane.
	(relax_frag_narrow): Rename to ...
	(relax_frag_for_align): ... this function.  Extend to handle
	RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
	RELAX_NARROW for the first slot.
	(find_address_of_next_align_frag, bytes_to_stretch): New.
	(future_alignment_required): Use find_address_of_next_align_frag and
	bytes_to_stretch.  Look ahead to subsequent frags to make smarter
	alignment decisions.
	(relax_frag_immed): Add format, slot, and estimate_only parameters.
	Check if transformations are enabled for b_j_loop_end workaround.
	Use new xtensa-isa.h functions and handle multislot instructions.
	Update call to xg_assembly_relax.
	(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
	RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
	frag types.
	(convert_frag_narrow): Add segP, format and slot parameters.  Call
	convert_frag_immed for branch instructions.  Adjust calls to
	tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf.  Use
	xg_get_single_size and xg_get_single_format.
	(convert_frag_fill_nop): New.
	(convert_frag_immed): Add format and slot parameters.  Handle multislot
	instructions and use new xtensa-isa.h functions.  Update calls to
	tinsn_immed_from_frag and xg_assembly_relax.  Check if transformations
	enabled for b_j_loop_end workaround.  Use build_nop instead of
	assemble_nop.  Check is_specific_opcode flag.  Check for unreachable
	frags.  Use xg_get_single_size.  Handle O_pltrel.
	(fix_new_exp_in_seg): Remove check for old plt flag.
	(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
	xtensa_insnbuf_to_chars.  Call tinsn_immed_from_frag.  Change check
	for loop opcode to an assertion.  Mark all frags up to the end of the
	loop as not transformable.
	(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
	(get_subseg_info): New.
	(xtensa_move_literals): Call xtensa_set_frag_assembly_state.  Add null
	check for dest_seg.
	(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
	literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
	(xtensa_switch_to_non_abs_literal_fragment): New.
	(cache_literal_section): Add is_code parameter and pass it through to
	retrieve_literal_seg.
	(retrieve_literal_seg): Add is_code parameter and use it to set the
	flags on the literal section.  Handle case where head parameter is 0.
	(get_frag_is_no_transform, set_frag_is_specific_opcode,
	set_frag_is_no_transform): New.
	(xtensa_create_property_segments): Add end_property_function parameter
	and pass it through to add_xt_block_frags.  Call bfd_get_section_flags
	and skip SEC_DEBUGGING and !SEC_ALLOC sections.
	(xtensa_create_xproperty_segments, section_has_xproperty): New.
	(add_xt_block_frags): Add end_property_function parameter and call it
	if it is non-zero.  Call xtensa_frag_flags_init.
	(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
	get_frag_property_flags, frag_flags_to_number,
	xtensa_frag_flags_combinable, xt_block_aligned_size,
	xtensa_xt_block_combine, add_xt_prop_frags,
	init_op_placement_info_table, opcode_fits_format_slot,
	xg_get_single_size, xg_get_single_format): New.
	(istack_push): Inline call to tinsn_copy.
	(tinsn_copy): Delete.
	(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
	CONST16 opcodes.  Handle O_big, O_illegal, and O_absent.
	(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
	(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
	functions.  Handle invisible operands.
	(tinsn_to_slotbuf): New.
	(tinsn_check_arguments): Use new xtensa-isa.h functions.
	(tinsn_from_chars): Add slot parameter.  Rewrite using xg_init_vinsn,
	vinsn_from_chars, and xg_free_vinsn.
	(tinsn_from_insnbuf): New.
	(tinsn_immed_from_frag): Add slot parameter and handle multislot
	instructions.  Handle symbol differences.
	(get_num_stack_text_bytes): Use xg_get_single_size.
	(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
	xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
	get_expr_register, set_expr_symbol_offset_diff): New.
	* config/tc-xtensa.h (MAX_SLOTS): Define.
	(xtensa_relax_statesE): Move from tc-xtensa.c. Add
	RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
	RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
	RELAX_NONE types.
	(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
	(xtensa_frag_type struct): Add is_assembly_state_set,
	use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
	is_align, is_text_align, alignment, and is_first_loop_insn fields.
	Replace is_generics and is_relax fields by is_no_transform field.
	Delete is_text and is_longcalls fields.  Change text_expansion and
	literal_expansion to arrays of MAX_SLOTS entries.  Add arrays of
	per-slot information: literal_frags, slot_subtypes, slot_symbols,
	slot_sub_symbols, and slot_offsets.  Add fr_prev field.
	(xtensa_fix_data struct): New.
	(xtensa_symfield_type struct): Delete plt field.
	(xtensa_block_info struct): Move definition to tc-xtensa.h.  Add
	forward declaration here.
	(xt_section_type enum): Delete xt_insn_sec.  Add xt_prop_sec.
	(XTENSA_SECTION_RENAME): Undefine.
	(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
	tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
	HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
	(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
	(unit_num_copies_func, opcode_num_units_func,
	opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
	(resource_table struct): New.
	* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
	(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
	literal_space, symbol, sub_symbol, offset, and literal_frag fields.
	(tinsn_copy): Delete prototype.
	(vliw_insn struct): New.
	* config/xtensa-relax.c (insn_pattern_struct): Add options field.
	(widen_spec_list): Add option conditions for density and boolean
	instructions.  Add expansions using CONST16 and conditions for using
	CONST16 vs. L32R.  Use new Xtensa LX RSR/WSR syntax.  Add entries for
	predicted branches.
	(simplify_spec_list): Add option conditions for density instructions.
	Add entry for NOP instruction.
	(append_transition): Add cmp function pointer parameter and use it to
	insert the new entry in order.
	(operand_function_LOW16U, operand_function_HI16U): New.
	(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
	OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(enter_opname, split_string): Use xstrdup instead of strdup.
	(init_insn_pattern): Initialize new options field.
	(clear_req_or_option_list, clear_req_option_list,
	clone_req_or_option_list, clone_req_option_list, parse_option_cond):
	New.
	(parse_insn_pattern): Parse option conditions.
	(transition_applies): New.
	(build_transition): Use new xtensa-isa.h functions.  Fix incorrectly
	swapped last arguments in calls to append_constant_value_condition.
	Call clone_req_option_list.  Add warning about invalid opcode.
	Handle LOW16U and HI16U function names.
	(build_transition_table): Add cmp parameter and use it in calls to
	append_transition.  Use new xtensa-isa.h functions.  Check
	transition_applies before adding entries.
	(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
	pass it through to build_transition_table.
	* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
	ReqOption, transition_cmp_fn): New types.
	(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
	(transition_rule struct): Add options field.
	* doc/as.texinfo (Overview): Update Xtensa options.
	* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
	--[no-]relax, and --[no-]generics options.  Update descriptions of
	--text-section-literals and --[no-]longcalls.  Add
	--[no-]absolute-literals and --[no-]transform.
	(Xtensa Syntax): Add description of syntax for FLIX instructions.
	Remove use of "generic" and "specific" terminology for opcodes.
	(Xtensa Registers): Generalize the syntax description to include
	user-defined register files.
	(Xtensa Automatic Alignment): Update.
	(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
	(Xtensa Call Relaxation): Linker can now remove most of the overhead.
	(Xtensa Directives): Remove confusing rules about precedence.
	(Density Directive, Relax Directive): Delete.
	(Schedule Directive): New.
	(Generics Directive): Rename to ...
	(Transform Directive): ... this node.
	(Literal Directive): Update for absolute literals.  Missing
	literal_position directive is now an error.
	(Literal Position Directive): Update for absolute literals.
	(Freeregs Directive): Delete.
	(Absolute Literals Directive): New.
	(Frame Directive): Minor editing.
	* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
	Update dependencies.
	* Makefile.in: Regenerate.

2004-10-07  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn): Use fix_new rather than fix_new_exp
	to build the second and third fixups for a composite relocation.
	(macro_read_relocs): New function.
	(macro_build): Use it.
	(s_cpsetup): Pass all three composite relocation codes to macro_build.
	Simplify fragging code accordingly.
	(s_gpdword): Use fix_new rather than fix_new_exp for the second part
	of the composite relocation.  Set fx_tcbit in both fixups.

2004-10-07  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn): Set fx_tcbit for composite relocs.
	(md_apply_fix3): Don't treat composite relocs as done.

2004-10-07  Jan Beulich <[email protected]>

	* macro.c (macro_expand_body): When ELF, use .LL rather than LL as
	prefix for symbol names generated from the LOCAL macro directive.

	* dw2gencfi.c (select_cie_for_fde): When separating CIE out from
	FDE, treat a DW_CFA_remember_state as we do a DW_CFA_advance_loc.

2004-10-07  Tomer Levi  <[email protected]>

	* config/tc-crx.c (preprocess_reglist): Handle Co-processor
	Special registers.
	(md_assemble): Add error checking for Co-Processor instructions.
	(get_cinv_parameters): Add 'b' option to invalidate the
	branch-target cache.

2004-10-05  Paul Brook  <[email protected]>

	* config/tc-arm.c (unwind): New variable.
	(vfp_sp_encode_reg): New function.
	(vfp_sp_reg_required_here): Use it.
	(vfp_sp_reg_list, vfp_dp_reg_list): Remove.
	(vfp_parse_reg_list): New function.
	(s_arm_unwind_fnstart, s_arm_unwind_fnend, s_arm_unwind_cantunwind,
	s_arm_unwind_personality, s_arm_unwind_personalityindex,
	s_arm_unwind_handlerdata, s_arm_unwind_save, s_arm_unwind_movsp,
	s_arm_unwind_pad, s_arm_unwind_setfp, s_arm_unwind_raw): New
	functions.
	(md_pseudo_table): Add them.
	(do_vfp_reg2_from_sp2): Use vfp_parse_reg_list and vfp_sp_encode_reg.
	(do_vfp_sp2_from_reg2, vfp_sp_ldstm, vfp_dp_ldstm): Ditto.
	(set_section, add_unwind_adjustsp, flush_pending_unwind,
	finish_unwind_opcodes, start_unwind_section, create_unwind_entry,
	require_hashconst, add_unwind_opcode): New functions.
	* doc/c-arm.texi: Document unwinding opcodes.
	* NEWS: Mention the new feature.

2004-10-04  Eric Christopher  <[email protected]>

	* config/tc-mips.c (md_apply_fix3): Remove erroneous assert.

2004-10-01  H.J. Lu  <[email protected]>

	* config/tc-ppc.c (md_apply_fix3): Call S_SET_THREAD_LOCAL for
	TLS relocations.
	* config/tc-s390.c (md_apply_fix3): Likewise.
	* config/tc-sparc.c (md_apply_fix3): Likewise.

2004-10-01  Paul Brook  <[email protected]>

	* config/tc-arm.c (arm_elf_section_type): New function.
	(arm_elf_change_section): Set section link for exidx sections.
	* config/tc-arm.h (arm_elf_section_type): Add prototype.
	(md_elf_section_type): Define.

2004-10-01  Bill Farmer  <[email protected]>

	* config/tc-pdp11.c (md_apply_fix3): Change to sign of the SOB
	instruction's offset.

2004-10-01  Adam Nemet  <[email protected]>

	* (TARGET_FORMAT): Remove LynxOS COFF definition.

2004-10-01  Ravi Ramaseshan  <[email protected]>

	* config/tc-arc.c (tc_gen_reloc): Don't assume fixP->fx_addsy is an
	asymbol *, instead use symbol_get_bfdsym.

2004-09-30  Linus Nielsen Feltzing  <[email protected]>

	* config/tc-m68k.c (select_control_regs): Add mcf5249.

2004-09-30  Paul Brook  <[email protected]>

	* config/tc-arm.c (do_smi, do_nop): New functions.
	(insns): Add ARMv6ZK instructions.
	(md_apply_fix3): Handle BFD_RELOC_ARM_SMI.
	(tc_gen_reloc): Ditto.
	(arm_cpus): Add mpcore and arm1176.
	(arm_archs): Add armv6{k,z,zk}.
	* doc/c-arm.texi: Document new cores and architectures.

2004-09-30  Nick Clifton  <[email protected]>

	* config/tc-arm.c: Use ISO C90 formatting.

2004-09-30  Vladimir Ivanov  <[email protected]>

	* config/tc-arm.c (mav_reg_required_here): Allow REG_TYPE_CN
	as alternative when REG_TYPE_MVF, REG_TYPE_MVD, REG_TYPE_MVFX or
	REG_TYPE_MVDX is expected.

2004-09-29  Marc Bevand  <[email protected]>

	* doc/c-i386.texi (i386-Mnemonics): Fix typo.

2004-09-21  James E Wilson  <[email protected]>

	* config/tc-ia64.c (ENCODED_PSP_OFFSET): New.
	(output_rp_psprel, output_pfs_psprel, output_preds_psprel,
	output_spill_base, output_unat_psprel, output_lc_psprel,
	output_fpsr_psprel, output_priunat_psprel, output_bsp_psprel,
	output_bsprestore_psprel, output_rnat_psprel, output_spill_psprel,
	output_spill_psprel_p): Use it.

2004-09-20  Tomer Levi  <[email protected]>

	* config/tc-crx.c (handle_LoadStor): New function.
	Handle load/stor unique instructions before parsing.

2004-09-17  Paul Brook  <[email protected]>

	* config/tc-arm.c (s_arm_rel31): New funciton.
	(md_pseudo_table): Add .rel31.
	(md_apply_fix3): Handle BFD_RELOC_ARM_TARGET2,
	BFD_RELOC_32_PCREL and BFD_RELOC_ARM_PREL31.
	(tc_gen_reloc): Handle BFD_RELOC_ARM_PREL31 and BFD_RELOC_ARM_TARGET2.
	(arm_fix_adjustable): Return 0 for BFD_RELOC_ARM_TARGET2.
	(arm_parse_reloc): Add (target2).

2004-09-17  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/gas.pot: Regenerate.

2004-09-14  Hideki IWAMOTO  <[email protected]>

	* config/tc-mmix.c [!LLONG_MIN]: Correct #elsif to #elif.
	[!LLONG_MAX]: Ditto.

2004-09-13  Paul Brook  <[email protected]>

	* config/tc-arm.c: Rename RELABS to TARGET1.

2004-09-13  Alan Modra  <[email protected]>

	* messages.c (as_internal_value_out_of_range): Cast values passed
	to as_bad_where or as_warn_where to proper type.

2004-09-11  Theodore A. Roth  <[email protected]>

	* config/tc-avr.c: Add support for
	atmega48, atmega88, atmega168, attiny13, attiny2313, at90can128.

2004-09-09  Alan Modra  <[email protected]>

	* dw2gencfi.c (select_cie_for_fde): When separating CIE out
	from FDE, treat a CFI_escape as we do a DW_CFA_advance_loc.

2004-09-08  Paul Brook  <[email protected]>

	* config/obj-elf.c (obj_elf_section_type): Handle init_array,
	fini_array and preinit_array section types.
	* config/tc-ia64.c (ia64_elf_section_type): Remove init_array
	and fini_array.
	* doc/as.texinfo: Document extra section types.

2004-09-02  Mark Mitchell  <[email protected]>

	* Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
	* Makefile.in: Regenerated.
	* configure.in: Set em for arm*-*-symbianelf*.
	* configure: Regenerated.
	* config/tc-arm.c (elf32_arm_target_format): Use Symbian target
	vectors when appropriate.
	* config/te-symbian.h: New file.

2004-09-03  Tomer Levi  <[email protected]>

	* config/tc-crx.c (gettrap): Exception vector can be case
	insensitive.
	(process_label_constant): Fix a 32-bit displacement bug in branch
	instructions.
	(get_operandtype) : Bug fix, wrong operand was used.
	(process_label_constant): Initialize relocation type to
	BFD_RELOC_NONE

2004-09-01  Richard Earnshaw < [email protected]>

	* tc-arm.c (arm_cpus, arm_fpus): Allow <cpu>-s as well as <cpu>s
	for synthesizable cores.

	* doc/c-arm.texi (ARM Options): Document canonical names of CPUs.

2004-08-25  Dmitry Diky  <[email protected]>

	* config/tc-msp430.c:	Clean-up the code.
	(md_relax_table): New relax table.
	(mcu_types): Sort MCU types.
	(md_pseudo_table): Add .profiler pseudo handler.
	(pow2value): New function.
	(msp430_profiler): New function.
	(msp430_operands): Add new insns handlers.
	(msp430_srcoperand): Add register operand handler, allow complex
	expressions.
	(md_estimate_size_before_relax): Rewritten.
	(md_convert_frag): Rewritten.
	(msp430_relax_frag): New function.
	* config/tc-msp430.h (md_relax_frag): define macro
	* doc/c-msp430.texi: Update information.

2004-08-24  Nick Clifton  <[email protected]>

	* as.c (std_shortopts): Allow -g to take an optional argument.
	(parse_args): Pass any switch starting with -g on to the backend
	for parsing.

2004-08-18  Mark Mitchell  <[email protected]>

	* configure.in (arm*-*-symbianelf*): New target.
	(arm*-*-eabi*): Likewise.
	* configure: Regenerated.

2004-08-18  Thiemo Seufer  <[email protected]>
	* config/tc-mips.c (append_insn): Handle delay slots in branch likely
	correctly.

2004-08-18  Jakub Jelinek  <[email protected]>

	* config/tc-ia64.c (start_unwind_section): Add linkonce_empty
	argument, don't do anything if current section is not
	.gnu.linkonce.t.* and linkonce_empty is set.
	(generate_unwind_image, dot_endp): Adjust callers, call
	start_unwind_section (*, 1) if nothing will be put into the
	section.

2004-08-17  Nick Clifton  <[email protected]>

	* as.c (MD_DEBUG_FORMAT_SELECTOR): Provide default definition.
	(show_usage): Add -g.
	(std_longopts): Add --gen-debug.  Alpha sort the table.
	(parse_args): Print an error message if a switch is not handled.
	Handle the -g switch, calling md_debug_format_selector() if
	necessary.
	* NEWS: Mention new feature.
	* doc/as.texinfo: Document new switch.
	* doc/internals.texi: Document behaviour of md_parse_option.

	* config/tc-arm.c (md_parse_option): Do not issue an error message
	if the switch is not recognised.
	* config/tc-m68k.c (md_parse_option): Likewise.
	* config/tc-pdp11.c (md_parse_option): Likewise.
	* config/tc-v850.c (md_parse_option): Likewise.

	* as.h: Fix up formatting.
	* tc.h: Likewise.

2004-08-16  Nick Clifton  <[email protected]>

	* macro.c (macro_set_alternate): Use ISO C90 formatting.

	* configure.in: Sort architecture based tables alphabetically.
	* configure: Regenerate.

2004-08-16  Alan Modra  <[email protected]>

	* config/tc-ppc.c (tc_ppc_regname_to_dw2regnum <regnames>): Replace
	{ "cc", 68 }, with { "cr", 70 }.

2004-08-13 Jan Beulich <[email protected]>
	   Nick Clifton <[email protected]>

	* as.c: Add and handle new --alternate command line option.
	* macro.c (macro_set_alternate): New.
	* macro.h (macro_set_alternate): Declare.
	* read.c: Add and handle new .altmacro and .noaltmacro directives.
	* doc/as.texinfo: Document new command line option and pseudo-ops
	as well as insert documentation originating from gasp about
	alternate macro syntax.
	* NEWS: Mention new command line option and pseudo-ops.

2004-08-10  Mark Mitchell  <[email protected]>

	* expr.c (operand): Handle the "~", "-", and "!" operators applied
	to bignums.

2004-08-06  Paul Brook  <[email protected]>

	* config/tc-arm.c (md_apply_fix3, tc_gen_reloc, arm_parse_reloc):
	Handle new relocations.
	* include/elf/arm.h (elf_arm_reloc_type): Add new EABI relocations.

2004-08-05  Bob Wilson  <[email protected]>

	* write.c (relax_segment): Use was_address instead of address when
	setting fr_fix field for align frag due to backwards .org.

2004-07-29  Alexandre Oliva  <[email protected]>

	Introduce SH2a support.
	2004-02-24  Corinna Vinschen  <[email protected]>
	* config/tc-sh.c (get_specific): Change arch_sh2a_up to
	arch_sh2a_nofpu_up.
	2004-02-24  Corinna Vinschen  <[email protected]>
	* config/tc-sh.c (md_parse_option): Add sh2a-nofpu ISA handling.
	2004-02-20  Corinna Vinschen  <[email protected]>
	* config/tc-sh.c (sh_elf_final_processing): Move sh2a recognition
	to end of conditional expression.
	2004-02-20  Corinna Vinschen  <[email protected]>
	* config/tc-sh.c: Add sh2a-nofpu support.
	2003-12-29  DJ Delorie  <[email protected]>
	* tc-sh.c: Add sh2a support.
	(parse_reg): Add tbr.
	(parse_at): Support @@(disp,tbr).
	(get_specific): Support sh2a opcodes.
	(insert4): New, for 4 byte relocs.
	(build_Mytes): Support sh2a opcodes.
	(md_apply_fix3_Mytes): Support sh2a opcodes.
	2003-12-02  Michael Snyder  <[email protected]>
	* config/tc-sh.c (md_parse_option): Handle sh2a.
	(sh_elf_final_processing): Ditto.

2004-07-27  Jason Thorpe  <[email protected]>

	* config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
	for TE_NetBSD.

2004-07-27  Alan Modra  <[email protected]>

	* config/tc-ppc.c (ppc_frob_file_before_adjust): Warn if .toc too big.
	(ppc_arch): Expand comment.

2004-07-27  Tomer Levi  <[email protected]>

	* config/tc-crx.c: Support evaluating the difference between two
	symbols.
	* config/tc-crx.h: Likewise.

2004-07-26  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (start_unwind_section): Set the linked-to
	section.
	(ia64_elf_section_change_hook): Set the linked-to section for
	SHT_IA_64_UNWIND.

2004-07-26  Dmitry Diky  <[email protected]>

	* config/tc-msp430.c: Add new subtargets: msp430x1610,
	msp430x1611, msp430x1612, msp430x415, msp430x417, msp430xG437,
	msp430xG438, msp430xG439.

2004-07-25  Daniel Jacobowitz  <[email protected]>

	* doc/as.texinfo (Section, PushSection): Correct documentation
	for ELF.

2004-07-21  Jan Beulich  <[email protected]>

	* config/tc-i386.c (optimize_imm): Adjust immediates to only those
	permissible for the selected instruction suffix.
	(match_template): Don't permit 64-bit general purpose operands in
	32-bit mode.
	(finalize_imm): Permit 64-bit immediates.
	(build_modrm_byte): Don't treat 32-bit addressing in 64-bit mode
	specially except for the width of the used base and/or index
	registers.  For 32-bit displacements, use sign-extended
	relocations only when using 64-bit addressing.
	Force zero displacement on rip-relative addressing when there is
	no other displacement.
	(i386_index_check): Don't treat 32-bit addressing in 64-bit mode
	specially except for the width of the used base and/or index
	registers.
	(parse_register): Disallow Reg64 registers in 32-bit mode.

	* config/tc-i386.c: For DefaultSize instructions, don't guess a 'q'
	suffix if the instruction doesn't support it.

2004-07-20  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (append_insn): Handle constant expressions with
	no associated relocation.
	(mips_ip): Cancel the expression after use for the Q format
	specifier.
	(parse_relocation): Return no relocation for unsupported
	operators.
	(my_getSmallExpression): Return no relocation if no relocation
	operators are used.

2004-07-19  John David Anglin  <[email protected]>

	* config/obj-som.c (adjust_stab_sections): Add prototype.
	(obj_som_compiler, obj_som_version, obj_som_copyright,
	adjust_stab_sections): Add ATTRIBUTE_UNUSED to unused arguments.
	* config/tc-hppa.c (update_subspace):  Likewise.
	(is_defined_subspace): Amplify comment.
	* config/obj-som.h (som_frob_file): Add prototype.

2004-07-19  Christopher Faylor  <[email protected]>
	    H.J. Lu  <[email protected]>

	* subsegs.c (section_symbol): Don't create a new segment when
	existing segment is undefined.

2004-07-16  Richard Earnshaw  <[email protected]>

	* config/tc-arm.c: Include include/opcode/arm.h.
	(ARM_EXT_*, ARM_ARCH_*, ARM_ANY, ARM_ALL, COPROC_ANY): Delete.
	(FPU_FPA_EXT_* FPU_VFP_EXT_*, FPU_ANY, FPU_NONE, FPU_MAVERICK): Delete.
	(FPU_ARCH_*): Delete.
	* Makefile.am: Update dependencies.
	* Makefile.in: Regenerate.

2004-07-15  Nick Clifton  <[email protected]>

	* configure.in: Accept armbe as a big-endian arm configuration.
	* configure: Regenerate.

2004-07-13  Thomas Nystrom  <[email protected]>

	* config/tc-i386.c (T_SHIFTOP): New constant.
	(intel_e05_1): Handle '&', '|' and T_SHIFTOP.
	(intel_el1): Handle '~'.
	(intel_get_token): Handle '<>', '&', '|' and '~'.

2004-07-13  Nick Clifton <[email protected]>

	(md_assemble): Remove spurious newline from end of as_bad error
	message.
	(intel_e05_1): Likewise.
	(intel_e11): Likewise.
	(intel_match_token): Likewise.

2004-07-11  Andreas Schwab  <[email protected]>

	* config/tc-m68k.c: Convert to C90.  Remove redundant
	declarations.  Indentation fixup.
	[M68KCOFF]: Include "obj-coff.h" instead of declaring
	obj_coff_section ourselves.

2004-07-09  James E Wilson  <[email protected]>

	* config/tc-ia64.c (default_big_endian): New.
	(dot_byteorder, md_begin): Use it.
	(md_parse_option): Set it.

2004-07-09  Nick Clifton  <[email protected]>

	* configure.in: Change sh-sybmian-elf to sh-*-symbianelf.
	* configure: Regenerate.
	* NEWS: Change sh-sybmian-elf to sh-*-symbianelf.
	* config/tc-sh.c (sh_elf_final_processing): Use renamed version of
	sh_find_elf_flags if necessary.

2004-07-08  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (mips_fix_adjustable): If the full addend is
	going to be split into more than one in-place addend, return 0
	for relocations against mergeable sections.  Associate comments
	with code.

2004-07-07  Tomer Levi  <[email protected]>

	* Makefile.am (CPU_TYPES): Add crx.
	(TARGET_CPU_CFILES): Add config/tc-crx.c.
	(TARGET_CPU_HFILES): Add config/tc-crx.h.
	(DEPTC_crx_elf): New target.
	(DEPOBJ_crx_elf): Likewise.
	(DEP_crx_elf): Likewise.
	* Makefile.in: Regenerate.
	* configure.in: Add crx* target.
	* configure: Regenerate.
	* config/tc-crx.c: New file.
	* config/tc-crx.h: New file.
	* NEWS: Mention new target.

2004-07-06  Nick Clifton  <[email protected]>

	* config.in: Undefine TARGET_SYMBIAN by default.
	* configure.in:
	* configure: Regenerate. Add sh-symbian-elf target.  If
	selected define TARGET_SYMBIAN.
	* config/tc-sh.h (TARGET_FORMAT): Select a Symbian target
	format if TARGET_SYMBIAN has been defined.

	* output-file.c (output_file_create): Report the target format
	chosen when bfd_openw reports that it is invalid.

	* config/obj-coff.c (coff_pseudo_table): Only define the weak
	pseudo for BFD based assemblers.

2004-07-05  Andrew Stubbs <[email protected]>

	gas:
	* config/tc-sh.c (md_assemble): Change isspace to ISSPACE.
	(md_parse_option): Remove redundant -isa testing.
	Make bfd_arch variable const.
	(md_show_usage): Make bfd_arch variable const.

2004-07-03  James E Wilson  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Check and set insn_addr.
	* config/tc-ia64.h (md_frag_check): Define.

2004-07-03  Aaron W. LaFramboise  <[email protected]>

	* config/obj-coff.c (obj_coff_weak): New .weak syntax for PE weak
	externals.
	* doc/as.texinfo (Weak): Document PE weak symbols.

2004-07-03  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (HAVE_IN_PLACE_ADDENDS): New macro.
	(reloc_needs_lo_p): Only return true if HAVE_IN_PLACE_ADDENDS.
	(mips_frob_file): Rework so that only a single pass through the
	relocs is needed.  Allow %lo()s to have higher offsets than their
	corresponding %hi()s or %got()s.

2004-07-02  Nick Clifton  <[email protected]>

	* config/tc-arm.c (md_apply_fix3:BFD_RELOC_ARM_IMMEDIATE): Do not
	allow values which have come from undefined symbols.
	Always consider this fixup to have been processed as a reloc
	cannot be generated for it.

2004-07-02  Alan Modra  <[email protected]>

	* frags.h (struct frag): Add has_code and insn_addr fields.
	* write.c (cvt_frag_to_fill): Invoke md_frag_check.
	* config/tc-ppc.c (md_assemble): Check and set insn_addr.
	* config/tc-ppc.h (md_frag_check): Define.

2004-06-28  Maciej W. Rozycki  <[email protected]>

	* doc/Makefile.am (info): Rename goal to...
	(info-local): ... this, to preserve implicit dependencies.
	* doc/Makefile.in: Regenerate with automake 1.8.5.

2004-06-25  Kazuhiro Inaoka  <[email protected]>

	* config/tc-m32r.c (md_convert_frag): Changed for @PLT.
	(m32r_cgen_record_fixup_exp): Changed for  @GOTOFF, @GOT.
	(m32r_fix_adjustable): Changed for  @GOTOFF, @GOT, @PLT.
	(tc_gen_reloc): Likewise.
	(m32r_end_of_match): Add for @GOTOFF, @GOT, @PLT.
	(m32r_parse_name): Likewise.
	(m32r_cgen_parse_fix_exp): Likewise.
	* config/tc-m32r.h (md_parse_name): Define for @GOTOFF, @GOT, @PLT.
	(O_PIC_reloc): Likewise.
	(TC_CGEN_PARSE_FIX_EXP): Likewise..
	* cgen.c (gas_cgen_parse_operand): Add TC_CGEN_PARSE_FIX_EXP
	for @GOTOFF, @GOT, @PLT.

2004-06-21 Jan Beulich  <[email protected]>

	* gas/symbols.c: While discarding ordinary local absolute symbols
	when --strip-local-absolute is in effect, retain file symbols.

2004-06-20  Andreas Schwab  <[email protected]>

	* config/tc-m68k.c (mri_chip): Replace current_chip, not augment.
	(md_parse_option): Likewise.

2004-06-17  Jan Beulich <[email protected]>

	* config/tc-i386.c: Deal with LEX_QM the same way as with LEX_AT.
	* config/te-netware.h: New file.
	* config/te-ppcnw.h: Delete: Obsolete.
	* configure.in: Eliminate ill NetWare targets. Make generic
	NetWare target use proper emulation.
	* Makefile.am: Eliminate reference to obsolete te-ppcnw.h, add
	reference to new te-netware.h.
	* configure: Regenerate.
	* Makefile.in: Regenerate.

2004-06-15  Martin Schwidefsky  <[email protected]>

	* config/tc-s390.c (s390_insn): Avoid incorrect signed/unsigned
	comparison in .insn pseudo operation.

2004-06-15  Alan Modra  <[email protected]>

	* config/obj-coff.c (coff_adjust_section_syms): Use
	bfd_get_section_size instead of bfd_get_section_size_before_reloc.
	(coff_frob_section): Likewise.
	* config/tc-mips.c (md_apply_fix3): Likewise.
	* config/obj-elf.c (elf_frob_file): Use bfd_set_section_size.
	(elf_frob_file_after_relocs): Likewise.

2004-06-10  John David Anglin  <[email protected]>

	* config/tc-hppa.c (log2): Rename to exact_log2.
	(pa_next_subseg): Delete unused function.
	(create_new_space): Mark unused arguments with ATTRIBUTE_UNUSED.
	(create_new_subspace): Likewise.

	Bug gas/213
	* config/tc-hppa.c (hppa_fix_adjustable): Allow reduction of fake
	labels.  Fix warning.

2004-05-28  DJ Delorie  <[email protected]>

	* config/tc-mn10300.h (tc_fix_adjustable): Define.
	* config/tc-mn10300.c (mn10300_fix_adjustable): Don't adjust debug
	or non-merged symbols.

2004-05-28  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (remove_marked_resource): Save, clear and
	restore the old slot when inserting srlz.i/srlz.d.

2004-05-28  Andrew Stubbs <[email protected]>

	* Makefile.am: Regenerate dependecies.
	* Makefile.in: Regenerate.
	* config/tc-sh.c (valid_arch): Make unsigned.
	(preset_target_arch): Likewise.
	(md_begin): Use new architecture flags system.
	(get_specific): Likewise.
	(assemble_ppi): Likewise.
	(md_assemble): Likewise. Also fix error check for bad opcodes.
	(md_parse_option): Likewise. Also generate -isa values according
	to the table in bfd/cpu-sh.c instead of just constants. Also
	allow <arch>-up ISA variants.
	(sh_elf_final_processing): Replace if-else chain with a call to
	sh_find_elf_flags().

2004-05-28  Peter Barada <[email protected]>

	* config/gc-m68k.c(m68k_ip): Convert mode 5 addressing
	with zero offset into mode 2 addressing to save a word.

2004-05-27  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (ar_is_in_integer_unit): Removed.
	(ar_is_only_in_integer_unit): New.
	(ar_is_only_in_memory_unit): New.
	(generate_unwind_image): Silence gcc on 32bit host.
	(md_assemble): Use ar_is_only_in_integer_unit instead of
	ar_is_in_integer_unit. Check AR access.

2004-05-27  Peter Barada  <[email protected]>

	* config/tc-m68k.c (md_begin): Sort the opcode table into
	alphabetical order.
	(m68k_compare_opcode): New function to do the sorting.

2004-05-24  Peter Barada  <[email protected]>

	* config/m68k-parse.y(operand): Allow for MAC/EMAC mask
	addressing on MIT style operands.
	* config/m68k-parse.y(yylex): Allow '-&' for predecrement
	w/mask addressing.
	* config/tc-m68k.c(install_operand): Comment 'G' and 'H' type
	operands.

2004-05-23  Alan Modra  <[email protected]>

	* expr.c (operand, operator): Don't reject '++' and '--'.

2004-05-20  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn): Use ISA-encoded addresses in MIPS16
	dwarf tables.

2004-05-17  Adam Nemet  <[email protected]>

	* configure.in: Add ppc-*-lynxos*.  Update i386-*-lynxos* to ELF.
	* configure: Regenerate.

2004-05-13  Paul Brook  <[email protected]>

	* dw2gencfi.c (output_cie):  Handle dwarf3 format CIE entries.

2004-05-13  Joel Sherrill <[email protected]>

	* configure.in (or32-*-rtems*): Switch to elf.
	* configure: Regenerate.

2004-05-13  Nick Clifton  <[email protected]>

	* po/fr.po: Updated French translation.

2004-05-11  Nick Clifton  <[email protected]>

	* doc/as.texinfo (Section): Document G and T flags to .section
	directive.  Document the extra arguments that the G flag
	requires.  Document the #tls flag.

2004-05-11  H.J. Lu  <[email protected]>

	* subsegs.c (section_symbol): Create a new section symbol if
	the existing one doesn't match.
	* symbols.c (symbol_set_bfdsym): Don't reset BFD section symbol.

2004-05-07  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (append_insn, mips_emit_delays): Extend -mfix-vr4120
	to cope with VR4181A errata MD(1) and MD(4).

2004-05-07  Brian Ford  <[email protected]>

	* NEWS: Mention .secrel32 for pe[i]-i386.

2004-05-07  Alexandre Oliva  <[email protected]>

	* config/tc-frv.h (MAX_MEM_FOR_RS_ALIGN_CODE): New.
	(HANDLE_ALIGN): New.

2004-05-06  Daniel Jacobowitz  <[email protected]>

	* Makefile.am (DIST_SUBDIRS): Define.
	* aclocal.m4: Regenerate with automake 1.8.4.
	* Makefile.in: Likewise.
	* doc/Makefile.in: Likewise.

2004-05-06  David Mosberger-Tang  <[email protected]>

	* config/tc-ia64.c (dot_serialize): Declare.
	(dot_serialize): New function.
	(md_pseudo_table): Add ".serialize.data" and
	".serialize.instruction" directives.

2004-05-06  Nick Clifton  <[email protected]>

	* messages (as_internal_value_out_of_range): Print a message about
	a value being out of range.  Be consistent about whether the
	values are printed in decimal or hexadecimal.
	(as_warn_value_out_of_range): Generate a warning message about an
	out of range value.
	(as_bad_value_out_of_range): Generate an error message about an
	out of range value.
	* as.h: Prototype the new functions.
	* config/tc-alpha.c (insert_operand): Use new function.
	* config/tc-arc.c (arc_insert_operand): Likewise.
	* config/tc-mn10200.c (mn10200_insert_operand): Likewise.
	* config/tc-mn10300.c (mn10300_insert_operand): Likewise.
	* config/tc-ppc.c (ppc_insert_operand): Likewise.
	* config/tc-s390.c (s390_insert_operand): Likewise.
	* config/tc-v850.c (v850_insert_operand): Likewise.

2004-05-05  Alexandre Oliva  <[email protected]>

	* configure.in: Set em=linux for frv-*-*linux*.
	* configure: Rebuilt.
	* config/tc-frv.h (TARGET_FORMAT): Use elf32-frvfdpic if...
	(frv_md_fdpic_enabled): New.
	* config/tc-frv.c (frv_md_fdpic_enabled): New.
	(DEFAULT_FDPIC): New.
	(frv_flags): Use DEFAULT_FDPIC.
	(frv_pic_flag): Likewise.
	(OPTION_NOPIC): New.
	(md_longopts): Add -mnopic.
	(md_parse_option): Handle it.
	(md_show_usage): Add -mfdpic and -mnopic.

2004-05-05  Peter Barada  <[email protected]>

	* config/tc-m68k.c: Add find_cf_chip to print list of valid
	chips for invalid coldfire instructions, rename selectors
	for ColdFire sub-variants, add 521x,5249,547x,548x and aliases,
	add current_chip to track which chip is referred to(including save/restore),
	use current_chip to select control registers, not current_arch.
	(md_show_usage): Add new chips.
	* doc/c-m68k.texi: Document new command line switches.

2004-05-05  Jakub Jelinek  <[email protected]>

	* tc-s390.h (md_do_align, HANDLE_ALIGN): Remove.
	(NOP_OPCODE): Define.
	(s390_align_code): Remove prototype.
	* tc-s390.c (s390_align_code): Remove.

2004-05-04  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (make_unw_section_name): Removed.
	(start_unwind_section): New function.
	(generate_unwind_image): Take const segT instead of const
	char *.
	(dot_handlerdata): Adjusted.
	(dot_endp): Likewise.

2004-05-02  H.J. Lu  <[email protected]>

	* config/obj-elf.c (obj_elf_change_section): Allow the
	".note.GNU-stack" section has SHF_EXECINSTR.

2004-05-02  H.J. Lu  <[email protected]>

	* config/obj-elf.c (get_section): Return bfd_boolean.
	(obj_elf_change_section): Call bfd_get_section_by_name_if
	instead of bfd_map_over_sections.

2004-04-30  H.J. Lu  <[email protected]>

	* config/obj-elf.c (get_section): New function.
	(obj_elf_change_section): Support multiple sections with same
	name.

2004-04-30  Nick Clifton  <[email protected]>

	* config/tc-arm.c (create_register_alias): Fix typo checking for
	case sensitive register aliases.
	(co_proc_number): Use error message string in all_reg_maps[]
	array.
	(cp_reg_required_here): Likewise.
	(fp_reg_required_here): Likewise.

2004-04-29  Brian Ford  <[email protected]>

	* dwarf2dbg.c (dwarf2_finish): Add SEC_DEBUGGING to section flags.

2004-04-28  Chris Demetriou  <[email protected]>

	* config/tc-mips.c (HAVE_32BIT_ADDRESSES, append_insn, macro_build)
	(load_address, macro, mips_ip, md_parse_option)
	(mips_force_relocation, mips_validate_fix, md_apply_fix3)
	(s_change_sec, pic_need_relax, tc_gen_reloc): Remove all
	embedded-PIC handling, and update comments.
	(SWITCH_TABLE): Remove.
	* config/tc-mips.h (DIFF_EXPR_OK): Delete.
	(enum mips_pic_level): Remove EMBEDDED_PIC.
	(EXTERN_FORCE_RELOC): Remove embedded-PIC handling.
	(TC_FORCE_RELOCATION): Update comment.
	* ecoff.c (ecoff_build_lineno): Add comment about some code that
	might be safe to remove now that MIPS embedded-PIC is gone.

2004-04-28  John David Anglin  <[email protected]>

	* config/obj-som.c (obj_som_init_stab_section): Add new arguments in
	call to obj_set_subsection_attributes.
	(obj_som_init_stab_section): Likewise.
	* config/tc-hppa.c (default_subspace_dict): Add comdat field.
	(pa_def_subspaces): Provide comdat default.
	(pa_subspace): Handle new "comdat" parameter.  Set SEC_LINK_ONCE and
	not SEC_IS_COMMON if section is comdat, common or dup_common.  Update
	calls to create_new_subspace and update_subspace to pass comdat flag.
	(create_new_subspace, update_subspace): Add new comdat argument.  Use
	it in calls to obj_set_subsection_attributes.
	* doc/c-hppa.texi (.subspa, .nsubspa): Document new comdat parameter
	and use of comdat, common and dup_comm parameters.

2004-04-26  H.J. Lu  <[email protected]>

	* config/obj-elf.c (obj_elf_change_section): Check if the old
	group name is NULL before comparison.

2004-04-23  Chris Demetriou  <[email protected]>

	* config/tc-mips.h (mips_dwarf2_addr_size): Prototype.

2004-04-23  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (s_mipsset): Set default CPU type for .set mipsN.

2004-04-23  Chris Demetriou  <[email protected]>

	* config/tc-mips.c (md_longopts): Remove -membedded-pic option.
	(OPTION_MEMBEDDED_PIC): Remove.
	(OPTION_TRAP, OPTION_BREAK, OPTION_EB, OPTION_EL)
	(OPTION_FP32, OPTION_GP32, OPTION_CONSTRUCT_FLOATS)
	(OPTION_NO_CONSTRUCT_FLOATS, OPTIONS_FP64, OPTION_GP64)
	(OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH)
	(OPTION_ELF_BASE): Renumber.
	(md_parse_option): Remove OPTION_MEMBEDDED_PIC handling.
	(md_show_usage): Remove mention of -membedded-pic.
	* doc/as.texinfo: Remove mention of -membedded-pic.

2004-04-23  Thiemo Seufer  <[email protected]>

	* config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Remove.
	* config/tc-mips.c (RDATA_SECTION_NAME, mips_target_format): Remove
	a.out support.
	(md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
	s_abicalls, nopic_need_relax, tc_gen_reloc): Remove uses of
	USE_GLOBAL_POINTER_OPT.

2004-04-22  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (macro): One more use of load_delay_nop.

2004-04-22  Atsushi Nemoto  <[email protected]>

	* config/tc-mips.c (load_delay_nop): New function.
	(load_address, macro): Use load_delay_nop() to build a nop
	which can be omitted with gpr_interlocks.

2004-04-22  Thiemo Seufer  <[email protected]>

	* config/tc-mips.c (hilo_interlocks, gpr_interlocks,
	cop_interlocks): Remove superfluous CPU entries.

2004-04-22  Paul Brook  <[email protected]>

	* config/tc-arm.c (mav_parse_offset): Value must be multiple of 4.

2004-04-22  Peter Barada <[email protected]>

	* NEWS: Added support for EMAC instructions and MAC/EMAC
	Motorola syntax.
	* config/m68k-parse.h: Add ACC[123], ACCEXT{01,23}, MAC/EMAC
	scale factor tokens, trailing_ampersand to mark mask addressing
	for MAC/EMAC instructions.
	* config/m68k-parse.y: Add options_ampersand clause, '<<',
	'>>'.
	(yylex): Handle '>', '<', and '&' following '+'.
	* config/tc-m68k.c: Set mcfmac/mcfemac on appropriate ColdFire
	architectures in archs[].
	(m68k-ip): Add '4', 'e', 'g', 'i', cases to handle mask addressing
	for MAC/EMAC instructions, ACC[0123], ACCEXT{01,23}, and '<<'/'>>'
	respectively.
	(m68k_ip): Handle trailing '&' on MAC/EMAC insns.
	(install_operand): Fix 'n' case, Add 'F', 'f', 'G', 'H', 'I', ']'
	cases.
	Add EMAC operands to init_table[].

2004-04-22  Bruno De Bus <[email protected]>

	* config/tc-arm.h (enum mstate): Move here, add MAP_UNDEFINED
	state.
	(TC_SEGMENT_INFO_TYPE): Define to enum mstate.
	* config/tc-arm.c (enum mstate): Delete from here.
	(mapping_state): Remove the static mapstate variable and instead
	store the state in the segment.  This allows a per-section mapping
	state.  Handle and ignore MAP_UNDEFINED states.
	(arm_elf_change_section): Get the current mapping state from the
	new section.
	(s_ltorg): Set the mapping state to MAP_DATA.
	(arm_cleanup): Use arm_elf_change_section to get the mapping state
	for each pool as it is emitted.

2004-04-22  Nick Clifton  <[email protected]>

	* config/tc-arm.h: Formatting tidy ups.

2004-04-20  Chris Demetriou  <[email protected]>

	* NEWS: Note that MIPS -membedded-pic option is deprecated.

2004-04-20  DJ Delorie  <[email protected]>

	* config/tc-i386.h [TE_PE] (TC_CONS_FIX_NEW): Define.
	* config/tc-i386.c (md_pseudo_table) [TE_PE]: Add "secrel32".
	[TE_PE] (O_secrel): Define.
	[TE_PE] (x86_pe_cons_fix_new): New.
	[TE_PE] (pe_directive_secrel): Likewise.
	(tc_gen_reloc) [TE_PE]: Support BFD_RELOC_32_SECREL.

2004-04-19  Eric Christopher  <[email protected]>

	* config/tc-mips.c (mips_dwarf2_addr_size): Revert part
	of previous patch for fix in gcc.

2004-04-19  Jakub Jelinek  <[email protected]>

	* config/tc-xtensa.c (xg_assembler_literal): Fix a typo.

2004-04-19  Nathan Sidwell  <[email protected]>

	* read.c (do_align): Call md_flush_pending_output, if defined.

2004-04-16  Alan Modra  <[email protected]>

	* expr.c (operand): Correct checks for ++ and --.

2004-04-14  H.J. Lu  <[email protected]>

	* config/tc-generic.c: Add some comments.

2004-04-14  Richard Sandiford  <[email protected]>

	* doc/c-mips.texi (-m{no-,}fix-vr4120): Renamed from
	-{no-}mfix-vr4122-bugs.
	* config/tc-mips.c (mips_fix_vr4120): Renamed from mips_fix_4122_bugs.
	(append_insn, mips_emit_delays): Update accordingly.
	(OPTION_FIX_VR4120, OPTION_NO_FIX_VR4120): Renamed from *VR4122.
	(md_longopts): Change -{no-,}mfix-vr4122-bugs to -m{no-,}fix-vr4120.
	(md_parse_option): Update after above changes.
	(md_show_usage): Add -mfix-vr4120.

2004-04-13  Bob Wilson  <[email protected]>

	* doc/as.texinfo (Sub-Sections): Conditionalize COFF-specific use
	of .section directive; add a reference to the ELF .subsection
	directive.

2004-04-13  Kazuhiro Inaoka  <[email protected]>

	* config/tc-m32r.c (md_assemble): Fixed infinite loop bug
	in parallel.

2004-04-11  Thiemo Seufer  <[email protected]>

	* Makefile.am: Remove mips from aout targets.
	* Makefile.in: Regenerate.
	* configure.in: Remove mips-dec-bsd* target.
	* configure: Regenerate.

2004-04-07  Alan Modra  <[email protected]>

	PR 96
	* config/tc-ppc.c (ppc_elf_suffix): Add valid32 and valid64 fields
	to struct map_bfd.  Adjust MAP macro, and define MAP32, MAP64.
	Update "mapping".  Restrict some @ modifiers to 32 bit.

2004-04-01  Asgari Jinia  <[email protected]>
	    Dhananjay Deshpande <[email protected]>

	* config/tc-sh.c (dont_adjust_reloc_32): New variable.
	(sh_fix_adjustable): Avoid adjusting BFD_RELOC_32 when
	dont_adjust_reloc_32 is set.
	(md_longopts): Add option -renesas.
	(md_parse_option, md_show_usage): Likewise.
	* doc/c-sh.texi: Likewise.

2004-04-01  Dave Korn  <[email protected]>

	* config/tc-dlx.c (md_assemble): set fx_no_overflow flag for
	hi16 and lo16 fixS structs.
	(md_assemble): generate bit_fixS for RELOC_DLX_LO16 in
	exactly the same way as for RELOC_DLX_REL16.
	(machine_ip): properly respect LO flag in the_insn and
	output RELOC_DLX_LO16 rather than RELOC_DLX_16.
	(md_apply_fix3): apply RELOC_DLX_LO16.

2004-03-30  Stan Shebs  <[email protected]>

	Remove long-obsolete MPW support.
	* mpw-config.in, mpw-make.sed, mac-as.r: Remove files.
	* configure.in: Remove mention of ppc-*-mpw* config.
	* configure.in: Likewise.

2004-03-30  Nick Clifton  <[email protected]>

	* config/tc-arm.c (meabi_flags): Make its use conditional upon
	OBJ_ELF being defined.

2004-03-27  Alan Modra  <[email protected]>

	* config/obj-aout.c (obj_aout_type): Remove #ifdef BFD_ASSEMBLER code.

2004-03-23  Paul Brook  <[email protected]>

	* config/tc-arm.c (meabi_flags): New variable.
	(arm_parse_eabi): New function.
	(md_begin): Set flags for EABI v3.
	(arm_eabis): Add.
	(arm_long_opts): Add meabi.
	* doc/as.texinfo <ARM>: Document -meabi.
	* doc/c-arm.texi: Ditto.

2004-03-22  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (xtensa_post_relax_hook): Create literal
	tables even when use_literal_section flag is not set.

2004-03-22  Alan Modra  <[email protected]>

	* config/tc-sh.c: Remove trailing whitespace.

2004-03-22  Hans-Peter Nilsson  <[email protected]>

	* doc/c-cris.texi (CRIS-Opts): Document --no-mul-bug-abort,
	--mul-bug-abort and the default behavior.
	* config/tc-cris.c (cris_insn_kind): New member CRIS_INSN_MUL.
	(err_for_dangerous_mul_placement): New variable.
	(STATE_MUL, OPTION_MULBUG_ABORT_ON, OPTION_MULBUG_ABORT_OFF): New
	macros.
	(md_cris_relax_table): Have placeholder for STATE_MUL.
	(md_longopts): New options --mul-bug-abort and --no-mul-bug-abort.
	(cris_relax_frag) <case ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: New
	case doing nothing.
	(md_estimate_size_before_relax) <case ENCODE_RELAX (STATE_MUL,
	STATE_BYTE)>: Ditto.
	(md_convert_frag) <ENCODE_RELAX (STATE_MUL, STATE_BYTE)>: Check
	alignment and position of this frag, emit error message if
	suspicious.
	(md_assemble): For a multiply insn and when checking it,
	transform the current frag into a special frag for that purpose.
	(md_parse_option) <case OPTION_MULBUG_ABORT_OFF, case
	OPTION_MULBUG_ABORT_ON>: Handle new options.

2004-03-19  Bob Wilson  <[email protected]>

	* config/tc-xtensa.c (mark_literal_frags): New function.
	(xtensa_move_literals): Call mark_literal_frags for all literal
	segments, including init and fini literal segments.
	(xtensa_post_relax_hook): Swap use of xt_insn_sec and xt_literal_sec.

2004-03-19  John David Anglin  <[email protected]>

	* tc-hppa.c (cons_fix_new_hppa): Check for PC relative base type.
	(pa_comm): Set BSF_OBJECT in symbol flags.

2004-03-19  Alan Modra  <[email protected]>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* config.in: Regenerate.
	* po/gas.pot: Regenerate.

2004-03-18  Nathan Sidwell  <[email protected]>

	* read.c (read_a_source_file): Use demand_empty_rest_of_line.
	(demand_empty_rest_of_line): Issue an error here.
	(ignore_rest_of_line): Silently skip to end.
	(demand_copy_string): Issue an error, not warning.
	(equals): Likewise.
	* config/obj-elf.c (obj_elf_section_name): Likewise.
	(obj_elf_section): Likewise.
	* config/tc-arc.c (arc_extoper): Remove bogus NULL checks.
	(arc_extinst): Likewise.
	* config/tc-ia64.c (dot_saveb): Use demand_empty_rest_of_line.
	(dot_spill): Likewise.
	(dot_unwabi): Likewise.
	(dot_prologue): Likewise.

	* expr.c (operand): Reject ++ and --.
	(operator): Likewise.

2004-03-17  Kaz Kojima  <[email protected]>

	* config/tc-sh.c: Include dw2gencfi.h.
	(sh_cfi_frame_initial_instructions): New function.
	(sh_regname_to_dw2regnum): Likewise.
	* config/tc-sh.h (DWARF2_LINE_MIN_INSN_LENGTH): Move to the end of
	file.
	(TARGET_USE_CFIPOP): Define.
	(tc_cfi_frame_initial_instructions): Likewise.
	(tc_regname_to_dw2regnum): Likewise.
	(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Likewise.
	* Makefile.am: Update dependencies.
	* Makefile.in: Regenerate.

2004-03-17  Ralf Corsepius <[email protected]>

	* configure.in: Switch sh-*-rtems* to ELF.  Add sh-*-rtemscoff*.
	* configure: Regenerate.

2004-03-12  Bob Wilson  <[email protected]>

	* read.c (s_leb128): Call md_flush_pending_output.

2004-03-12  Michal Ludvig  <[email protected]>

	* config/tc-i386.c (output_insn): Handle PadLock instructions.
	* config/tc-i386.h (CpuPadLock): New define.
	(CpuUnknownFlags): Added CpuPadLock.

2004-03-07  Andreas Schwab  <[email protected]>

	* doc/c-hppa.texi (HPPA Directives): Fix typo.

2004-03-07  Richard Henderson  <[email protected]>

	* dw2gencfi.c (output_cie): Align length to 4 byte boundary.
	(cfi_finish): Likewise for fde.

2004-03-05  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (md_assemble): Properly handle NULL
	align_frag.
	(ia64_handle_align): Don't abort if failed to add a stop bit.

2004-03-04  H.J. Lu  <[email protected]>

	* Makefile.in: Regenerated.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Likewise.

2004-03-03  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (dot_align): New.
	(ia64_do_align): Make it static.
	(md_pseudo_table): Use "dot_align" for "align".
	(ia64_md_do_align): Don't set align_frag here.
	(ia64_handle_align): Add a stop bit to the previous bundle if
	needed.

	* config/tc-ia64.h (ia64_do_align): Removed.

2003-03-03  Andrew Stubbs  <[email protected]>

	* config/tc-sh.c (md_parse_option): Add -isa=sh4-nofpu and
	-isa=sh4-nommu-nofpu options. Adjust help messages accordingly.
	(sh_elf_final_processing): Output BFD type sh4_nofpu if that is
	the most general type or the user specifically requested it.
	(md_assemble): Add a new error message for when an instruction
	is understood, but is not allowed due to an -isa option.

2004-03-02  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (align_frag): New.
	(md_assemble): Set the tc_frag_data field in align_frag for
	IA64_OPCODE_FIRST instructions.
	(ia64_md_do_align): Set align_frag.
	(ia64_handle_align): Add a stop bit if needed.

	* config/tc-ia64.h (TC_FRAG_TYPE): New.
	(TC_FRAG_INIT): New.

2004-03-01  Richard Sandiford  <[email protected]>

	* config/tc-frv.c (fr400_audio): New variable.
	(md_parse_option, md_show_usage): Add -mcpu=fr405 and -mcpu=fr450.
	(md_parse_option): Set fr400_audio for -mcpu=fr400 and -mcpu=fr405.
	(target_implements_insn_p): New function.
	(md_assemble): Report an error if the processor doesn't implement
	the instruction.

2004-02-27  Kazuhiro Inaoka  <[email protected]>

	* config/tc-m32r.c (md_longopts): Added -no-bitinst option.
	(md_parse_option): Ditto.
	(OPTION_NO_SPECIAL_M32R): Added.
	(md_show_usage): Document it.
	(enable_speial_m32r): Changed a default value from 0 to 1.
	* doc/c-m32r.texi: Document the -no-bitinst option.

2004-02-27  Nick Clifton  <[email protected]>

	* config/tc-sh.c (get_operand): Revert previous delta.
	(tc_gen_reloc): Check for an unknown reloc type before processing
	the addend.

2004-02-27  Hannes Reinecke  <[email protected]>

	* config/tc-s390.c (s390_insn): Correct range check for opcode in
	.insn pseudo operation.

2004-02-27  Anil Paranjpe  <[email protected]>

	* config/tc-sh.c (get_operand):  In case of #Imm, check has been
	added for wrong syntax.

2004-02-26  Eric Christopher  <[email protected]>

	* config/tc-mips.c (mips_dwarf2_addr_size): New.
	* config/tc-mips.h (DWARF2_ADDR_SIZE): Use.

2004-02-26  Andrew Stubbs <[email protected]>

	* config/tc-sh.c (build_Mytes): Add REG_N_D and REG_N_B01
	nibble types to assembler.

2004-02-25  Fred Fish  <[email protected]>

	* config/tc-iq2000.c: Add missing \n\ in multiline string literal.

2004-02-20  James E Wilson  <[email protected]>

	* config/tc-ia64.c (slot_index): New arg before_relax.  Use instead of
	finalize_syms.
	(fixup_unw_records): New arg before_relax.  Pass to slot_index.
	(ia64_estimate_size_before_relax): New.
	(ia64_convert_frag): Pass 0 to fixup_unw_records.  Add comment.
	(generate_unwind_image): Pass 1 to fixup_unw_records.
	* config/tc-ia64.h (ia64_estimate_size_before_relax): Declare.
	(md_estimate_size_before_relax): Call ia64_estimate_size_before_relax.

2004-02-19  Jakub Jelinek  <[email protected]>

	* stabs.c (generate_asm_file): Avoid warning about use of
	uninitialized variable.

2004-02-18  David Mosberger  <[email protected]>

	* config/tc-ia64.c (ia64_flush_insns): In addition to prologue,
	body, and endp, allow unwind records which do not have a "t"
	(time/instruction) field.

2004-02-17  Petko Manolov  <[email protected]>

	* config/tc-arm.c (do_mav_dspsc_1): Correct offset of CRn.
	(do_mav_dspsc_2): Likewise.
	Fix accumulator registers move opcodes.

2004-02-13  Hannes Reinecke  <[email protected]>
	    Jakub Jelinek  <[email protected]>

	* dwarf2dbg.c (get_filenum): Do not read beyond allocated memory.

2004-02-10  Steve Ellcey  <[email protected]>

	* config/tc-ia64.h (ia64_frob_symbol): New declaration.
	(tc_frob_symbol): New macro definition.
	* config/tc-ia64.c (ia64_frob_symbol): New routine.

2004-02-09  Daniel Jacobowitz  <[email protected]>

	* config/tc-arm.c (md_begin): Mark .note.gnu.arm.ident as
	read-only.

2004-02-09  Nathan Sidwell  <[email protected]>

	* read.h (IGNORE_OPCODE_CASE): Do not define. Replace with ...
	(TC_CASE_SENSITIVE): ... this.
	* read.c: Replace IGNORE_OPCODE_CASE with TC_CASE_SENSITIVE.
	* doc/internals.texi (TC_CASE_SENSITIVE): Document.

2004-02-06  James E Wilson  <[email protected]>

	* config/tc-ia64.c (dot_endp): Delete call to output_endp.
	(generate_unwind_image): Re-add it here.

2004-02-06  Nathan Sidwell  <[email protected]>

	* dwarf2dbg.c (DWARF2_ADDR_SIZE): Remove trailing ';'
	* read.h (SKIP_WHITESPACE): Turn into an expression.
	* read.c (read_a_source_file): A pseudo is removed by having a
	NULL handler.

2004-02-05  James E Wilson  <[email protected]>

	* config/tc-ia64.c (output_endp): New.
	(count_bits): Delete.
	(ia64_flush_insns, process_one_record, optimize_unw_records): Handle
	endp unwind records.
	(fixup_unw_records): Handle endp unwind records.  Delete code for
	shortening prologue regions not followed by a body record.
	(dot_endp): Call add_unwind_entry to emit endp unwind record.
	* config/tc-ia64.h (unw_record_type): Add endp.

2004-02-03  James E Wilson  <[email protected]>

	* config/tc-ia64.c (ia64_convert_frag): Call md_number_to_chars to
	fill padding bytes with zeroes.
	(emit_one_bundle): New locals last_ptr, end_ptr.  Rewrite code that
	sets unwind_record slot_number and slot_frag fields.

2004-02-02  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (add_got_offset_hilo): New function.
	(macro): Use load_register() and add_got_offset_hilo() to load
	constants instead of hardcoding code sequences throughout.

2004-01-28  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (emit_one_bundle): Add proper indentation.

2004-01-26  Bernardo Innocenti  <[email protected]>

	* config/tc-m68k.h (EXTERN_FORCE_RELOC): Handle m68k-uclinux specially,
	like m68k-elf.
	* config/tc-m68k.c (RELAXABLE_SYMBOL): Use EXTERN_FORCE_RELOC instead
	of hard-coded test for TARGET_OS=elf.

2004-01-24  Chris Demetriou  <[email protected]>

	* config/tc-mips.c (hilo_interlocks): Change definition
	so that MIPS32, MIPS64 and later ISAs are included, along with
	the already-included machines.  Update comments.

2004-01-23  Daniel Jacobowitz  <[email protected]>

	* config/tc-arm.c (tc_gen_reloc): Improve error message for
	undefined local labels.

2004-01-23  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (load_address, macro): Update comments about
	NewABI GP relaxation.

2004-01-23  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (macro_build): Remove place and counter arguments.
	(mips_build_lui, macro_build_ldst_constoffset): Likewise.
	(mips16_macro_build, macro_build_jalr): Remove counter argument.
	(set_at, load_register, load_address, move_register): Likewise.
	(load_got_offset, add_got_offset): Likewise.
	Update all calls and tidy accordingly.

2004-01-23  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (RELAX_ENCODE): Remove WARN argument.
	(RELAX_FIRST, RELAX_SECOND): Turn into 8-bit quantities.
	(RELAX_USE_SECOND): Bump to 0x10000.
	(RELAX_SECOND_LONGER, RELAX_NOMACRO, RELAX_DELAY_SLOT): New flags.
	(mips_macro_warning): New variable.
	(md_assemble): Wrap macro expansion in macro_start() and macro_end().
	(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Likewise.
	(relax_close_frag): Set mips_macro_warning.first_frag.  Adjust use
	of RELAX_ENCODE.
	(append_insn): Update mips_macro_warning.sizes.
	(macro_start, macro_warning, macro_end): New functions.
	(macro_build): Don't emit warnings here.
	(macro_build_lui, md_estimate_size_before_relax): ...or here.
	(md_convert_frag): Check for cases where one macro alternative
	needs a warning and the other doesn't.  Emit a warning if the
	longer sequence was chosen.

2004-01-23  Richard Sandiford  <[email protected]>

	* config/tc-mips.h (tc_frag_data_type, TC_FRAG_TYPE): Remove.
	* config/tc-mips.c (RELAX_ENCODE): Take three arguments: the size of
	the first sequence, the size of the second sequence, and a flag
	that says whether we should warn.
	(RELAX_OLD, RELAX_NEW, RELAX_RELOC[123]): Delete.
	(RELAX_FIRST, RELAX_SECOND): New.
	(mips_relax): New variable.
	(relax_close_frag, relax_start, relax_switch, relax_end): New fns.
	(append_insn): Remove "place" argument.  Use mips_relax.sequence
	rather than "place" to check whether we're expanding the second
	alternative of a relaxable macro.  Remove redundant check for
	branch relaxation.  If generating a normal insn, and there
	is not enough room in the current frag, call relax_close_frag()
	to close it.  Update mips_relax.sizes[].  Emit fixups for the
	second version of a relaxable macro.  Record the first relaxable
	fixup in mips_relax.  Remove tc_gen_reloc workaround.
	(macro_build): Remove all uses of "place".  Use mips_relax.sequence
	in the same way as in append_insn.
	(mips16_macro_build): Remove "place" argument.
	(macro_build_lui): As for macro_build.  Don't drop the add_symbol
	when generating the second version of a relaxable macro.
	(load_got_offset, add_got_offset): New functions.
	(load_address, macro): Use new relaxation machinery.  Remove
	tc_gen_reloc workarounds.
	(md_estimate_size_before_relax): Set RELAX_USE_SECOND if the second
	version of a relaxable macro is needed.  Return -RELAX_SECOND if the
	first version is needed.
	(tc_gen_reloc): Remove relaxation handling.
	(md_convert_frag): Go through the fixups for a relaxable macro and
	mark those that belong to the unneeded alternative as done.  If the
	second alternative is needed, adjust the fixup addresses to account
	for the deleted first alternative.

2004-01-23  Richard Sandiford  <[email protected]>

	* frags.h (frag_room): Declare.
	* frags.c (frag_room): New function.
	* doc/internals.texi: Document it.

2004-01-22  Thiemo Seufer <[email protected]>

	* config/tc-mips.c (append_insn): Don't do r3900 interlock
	optimization for -mtune=r3900, as this will break on other CPUs.

2004-01-11  Tom Rix   <[email protected]>

	* config/tc-m68hc11.c (build_indexed_byte): movb and movw cannot
	be relaxed, use fixup.
	(md_apply_fix3): Use 5 bit reloc from movb and movw fixup.

2004-01-19  Jakub Jelinek  <[email protected]>

	* config/tc-sparc.c (sparc_ip): Disallow %f32-%f63 for single
	precision operands.

2004-01-14  Maciej W. Rozycki  <[email protected]>

	* config/tc-mips.c (append_insn): Properly detect variant frags
	that preclude swapping of relaxed branches.  Correctly swap
	instructions between frags when dealing with relaxed branches.

2004-01-14  Maciej W. Rozycki  <[email protected]>

	* acinclude.m4: Quote names of macros to be defined by AC_DEFUN
	throughout.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.

2004-01-12  Anil Paranjpe  <[email protected]>

	* config/tc-h8300.c (build_bytes): Apply relaxation to bit
	manipulation insns.

2004-01-12  Richard Sandiford  <[email protected]>

	* config/tc-mips.c (macro_build_jalr): When adding an R_MIPS_JALR
	reloc, reserve space for the delay slot as well as the jalr itself.

2004-01-09  Paul Brook  <[email protected]>

	* config/tc-arm.c (do_vfp_reg2_from_sp2): Rename from do_vfp_sp_reg2.
	(do_vfp_sp2_from_reg2): New function.
	(insns): Use them.
	(do_vfp_dp_from_reg2): Check return values properly.

2004-01-08  Ian Lance Taylor  <[email protected]>

	* config/tc-mips.c (warn_nops): Remove static variable.
	(macro): Remove test of warn_nops.
	(md_shortops): Remove 'n'.
	(md_parse_option): Remove 'n' case.
	(md_show_usage): Remove -n.
	* doc/as.texinfo (Overview): Remove MIPS -n option.
	* doc/c-mips.texi (MIPS Opts): Remove mention -n.
	* NEWS: Mention removal of MIPS -n option.

	* config/tc-mips.c (ISA_HAS_COPROC_DELAYS): Remove.
	(cop_interlocks): Check ISA level.
	(cop_mem_interlocks): Define.
	(reg_needs_delay): Check cop_interlocks rather than
	ISA_HAS_COPROC_DELAYS.
	(append_insn): Likewise.  Use cop_mem_interlocks rather than
	directly checking mips_opts.isa.
	(mips_emit_delays): Likewise.

2004-01-07  H.J. Lu  <[email protected]>

	* config/tc-ia64.c (unwind): Move next_slot_number and
	next_slot_frag to ...
	(unw_rec_list): Here.
	(free_list_records): Removed.
	(output_unw_records): Likewise.
	(generate_unwind_image): Make it void.
	(alloc_record): Initialize next_slot_number and next_slot_frag.
	(slot_index): Take .org, .space and .align into account.
	(fixup_unw_records): Don't set slot_number to 0. Use
	list->next_slot_number and list->next_slot_frag instead of
	unwind.next_slot_number and unwind.next_slot_frag.
	(ia64_convert_frag): New.
	(generate_unwind_image): Generate a rs_machine_dependent frag
	for unwind record.
	(emit_one_bundle): Use list->next_slot_number and
	list->next_slot_frag instead of unwind.next_slot_number and
	unwind.next_slot_frag.

	* config/tc-ia64.h (md_convert_frag): Defined as
	ia64_convert_frag.
	(md_estimate_size_before_relax): Defined as (f)->fr_var.

2004-01-06  Alexandre Oliva  <[email protected]>

	2003-12-19  Alexandre Oliva  <[email protected]>
	* config/tc-frv.h (md_apply_fix3): Don't define.
	* config/tc-frv.c (md_apply_fix3): New.  Shift/truncate %hi/%lo
	operands.
	* config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
	2003-10-07  Alexandre Oliva  <[email protected]>
	* config/tc-frv.c (line_separator_chars): Add `!'.
	2003-09-19  Alexandre Oliva  <[email protected]>
	* config/tc-frv.c (md_assemble): Clear insn upfront.
	2003-09-18  Alexandre Oliva  <[email protected]>
	* config/tc-frv.c (OPTION_FDPIC): New macro.
	(md_longopts): Add mfdpic.
	(md_parse_option): Handle it.
	2003-08-04  Alexandre Oliva  <[email protected]>
	* config/tc-frv.c (md_cgen_lookup_reloc) <FRV_OPERAND_D12,
	FRV_OPERAND_S12>: Use reloc type encoded in fix-up.
	(frv_pic_ptr): Parse funcdesc.

2004-01-05  Maciej W. Rozycki  <[email protected]>

	* doc/as.texinfo: Let texi2pod parse asconfig.texi and
	gasver.texi.  Remove duplicate symbol definitions for texi2pod.

2004-01-05  Maciej W. Rozycki  <[email protected]>

	* Makefile.am (Makefile): Move the dependency on
	$(BFDDIR)/configure.in to...
	(CONFIG_STATUS_DEPENDENCIES): ... here.
	(AUTOMAKE_OPTIONS): Require automake 1.8.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (BASEDIR, BFDDIR): Define.
	(CONFIG_STATUS_DEPENDENCIES): Add a dependency on
	$(BFDDIR)/configure.in here as well.
	* doc/Makefile.in: Regenerate.

2004-01-05  Maciej W. Rozycki  <[email protected]>

	* Makefile.am (install, install-info, RECURSIVE_TARGETS): Remove.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* doc/Makefile.am (install, install-info): Remove.
	(install-data-local): A new hook for install-info.
	(AUTOMAKE_OPTIONS): Require automake 1.8.
	* doc/Makefile.in: Regenerate.

2004-01-02  Nutan Singh <[email protected]>

	* doc/c-sh.texi: Update description about floating point behavior
	of SH family.

2004-01-02  Bernardo Innocenti  <[email protected]>

	* configure.in: Add m68k-uClinux target.
	* configure: Regenerate.

For older changes see ChangeLog-0203
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: