* h8500-tdep.c (initialize_h8500_tdep, large_command):

[binutils.git] / bfd / ChangeLog

Fri Apr 15 12:22:07 1994  Ian Lance Taylor  ([email protected])

	* coff-mips.c (mips_relocate_section): When relaxing, adjust local
	relocs against the .text section as required.
	* ecofflink.c (bfd_ecoff_debug_accumulate): When relaxing, adjust
	PDR addresses as required.

	* ecoff.c (ecoff_emit_aggregate): Take fdr argument.  Map fdr
	index through rfd map if it exists.  Check for a couple of cases
	which gdb handles specially.  Change all callers.
	(ecoff_type_to_string): Take fdr argument rather than aux_ptr and
	bigendian argument.  Change all callers.
	(ecoff_print_symbol): Handle stStruct, stUnion and stEnum.

Thu Apr 14 13:05:10 1994  Ian Lance Taylor  ([email protected])

	* coff-mips.c (mips_howto_table): Add dummy entries to account for
	numbering changes in include/coff/mips.h.  Add entries for
	MIPS_R_RELHI and MIPS_R_RELLO.
	(mips_ecoff_swap_reloc_in): Handle an extra bit for the reloc type
	when little endian.  Treat internal MIPS_R_RELLO or MIPS_R_RELHI
	relocs like MIPS_R_SWITCH, and convert r_offset from 24 to 32
	bits.
	(mips_ecoff_swap_reloc_out): Likewise.
	(mips_adjust_reloc_in): Handle internal MIPS_R_RELLO or
	MIPS_R_RELHI relocs like MIPS_R_SWITCH.
	(mips_adjust_reloc_out): Likewise.
	(mips_relhi_addr, mips_relhi_addend): New static variables.
	(mips_relhi_reloc, mips_rello_reloc): New functions.
	(mips_bfd_reloc_type_lookup): Turn BFD_RELOC_PCREL_HI16_S into
	MIPS_R_RELHI and turn BFD_RELOC_PCREL_LO16 into MIPS_R_RELLO.
	(mips_relocate_hi): Rename from mips_relocate_refhi, and add pcrel
	argument.  Changed all callers.
	(mips_relocate_section): Rename got_reflo to got_lo and
	reflo_int_rel to lo_int_rel.  Handle MIPS_R_RELLO and MIPS_R_RELHI
	relocs.
	(mips_relax_section): Adjust MIPS_R_RELHI/MIPS_R_RELLO pairs when
	expanding a PC relative call.

	* reloc.c (bfd_reloc_code_real_type): Add BFD_RELOC_PCREL_HI16_S
	and BFD_RELOC_PCREL_LO16.
	* bfd-in2.h: Rebuilt.

Wed Apr 13 11:50:07 1994  Stan Shebs  ([email protected])

	* coff-sparc.c (sparccoff_vec): Set minimum alignment power to 3.

Tue Apr 12 13:36:20 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_write_fixups): Always emit at least
        one relocation for any non-bss section.

Mon Apr 11 14:41:44 1994  Ian Lance Taylor  ([email protected])

	* elfcode.h (assign_file_positions_except_relocs): Don't require
	the file alignment to correspond to the page size when linking
	with -N.

Sun Apr 10 01:02:24 1994  Jeffrey A. Law  ([email protected])

	* elfcode.h (write_relocs): For rela relocations, adjust the
	addend for relocations involving section symbols to account
	for the lossage of 1:1 mapping from input section symbols to
	output section symbols.

Fri Apr  8 12:22:02 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (NAME(aout,make_sections)): New function.
	(NAME(aout,some_aout_object_p)): Call NAME(aout,make_sections)
	rather than making sections inline.
	(NAME(aout,mkobject)): Don't make any sections.
	(NAME(aout,adjust_sizes_and_vmas)): Call NAME(aout,make_sections).
	(NAME(aout,final_link)): Don't dereference obj_textsec (abfd) or
	obj_datasec (abfd) if they are NULL.
	* libaout.h (NAME(aout,make_sections)): Declare.
	* bout.c (b_out_mkobject): Don't make any sections.
	(b_out_write_object_contents): Call aout_32_make_sections.
	(b_out_set_section_contents): Likewise.
	* i386os9k.c (os9k_mkobject): Don't make any sections.
	(os9k_write_object_contents): Call aout_32_make_sections.
	(os9k_set_section_contents): Likewise.

	* aoutx.h (NAME(aout,new_section_hook)): Don't set N_EXT in target
	index.

Wed Apr  6 20:44:56 1994  Peter Schauer  ([email protected])

	* config.bfd, configure.host:  Add mips-*-sysv4* support.

Thu Apr  7 14:23:05 1994  Ian Lance Taylor  ([email protected])

	* coff-mips.c (mips_howto_table): Add entry for MIPS_R_SWITCH.
	(mips_ecoff_swap_reloc_in): For MIPS_R_SWTICH, copy r_symndx into
	r_offset and set r_symndx to RELOC_SECTION_TEXT.
	(mips_ecoff_swap_reloc_out): For MIPS_R_SWITCH, get the r_symndx
	value from the r_offset field.
	(mips_adjust_reloc_in): Maximum r_type value is now MIPS_R_SWITCH.
	For MIPS_R_SWITCH, copy the r_offset field into the addend field.
	(mips_adjust_reloc_out): For MIPS_R_SWITCH, copy the addend field
	into the r_offset field.
	(mips_switch_reloc): New function.
	(mips_bfd_reloc_type_lookup): Translate BFD_RELOC_GPREL32 into
	MIPS_R_SWITCH.
	(mips_relocate_section): Handle MIPS_R_SWITCH.
	(mips_relax_section): Adjust MIPS_R_SWITCH offset if necessary.

Thu Apr  7 11:10:51 1994  Jeffrey A. Law  ([email protected])

	* elfcode.h (elf_set_section_contents): Support calling the backend
	function elf_backend_begin_write_processing when just beginning to
	write an object file.

	* libelf.h (elf_backend_begin_write_processing): Declare.

	* elf{32,64}-target.h (elf_backend_begin_write_processing): Provide
	a default definition.
	(elf{32,64}_bed): Add elf_backend_begin_write_processing.
	
	* elf32-hppa.h (elf_hppa_tc_symbol): Delete extern declaration.
	(elf_hppa_tc_make_sections): Likewise.

	* elf32-hppa.c (symext_chain_built): Delete.
	(symext_chain_size): Renamed from symextn_contents_real_size.
	(elf32_hppa_backend_{begin,final}_write_processing): New functions.
	(add_entry_to_symext_chain): New function.
	(hppa_elf_set_section_contents): Ignore writes to the symbol extension
	section until it's been rebuilt internally.
	(hppa_elf_get_section_contents): Symbol extension section is no
	longer special.
	(elf_backend_{begin,final}_write_processing): Define.
	(elf_hppa_tc_make_sections): Simplify now that much code has
	migrated into elf32_hppa_backend_{being,final}_write_processing.

Wed Apr  6 17:24:14 1994  Ian Lance Taylor  ([email protected])

	Add new target vectors to read the dynamic symbols and dynamic
	relocs.  Change a.out to use these rather than reading the dynamic
	symbols and relocs along with the normal symbols and relocs.
	* targets.c (bfd_target): Add fields
	_bfd_get_dynamic_symtab_upper_bound,
	_bfd_canonicalize_dynamic_symtab,
	_bfd_get_dynamic_reloc_upper_bound,
	_bfd_canonicalize_dynamic_reloc.
	(BFD_JUMP_TABLE_DYNAMIC): Define.
	* libbfd-in.h (_bfd_nodynamic_get_dynamic_symtab_upper_bound):
	Define.
	(_bfd_nodynamic_canonicalize_dynamic_symtab): Define.
	(_bfd_nodynamic_get_dynamic_reloc_upper_bound): Define.
	(_bfd_nodynamic_canonicalize_dynamic_reloc): Define.
	* bfd.c (bfd_get_dynamic_symtab_upper_bound): Define.
	(bfd_canonicalize_dynamic_symtab): Define.
	(bfd_get_dynamic_reloc_upper_bound): Define.
	(bfd_canonicalize_dynamic_reloc): Define.
	* sunos.c (MY_read_dynamic_symbols): Don't define.
	(MY_read_dynamic_relocs): Don't define.
	(MY_get_dynamic_symtab_upper_bound): Define.
	(MY_canonicalize_dynamic_symtab): Define.
	(MY_get_dynamic_reloc_upper_bound): Define.
	(MY_canonicalize_dynamic_reloc): Define.
	(struct sunos_dynamic_info): Change type of dynsym_count and
	dynrel_count to long.  Add fields canonical_dynsym and
	canonical_dynrel.
	(sunos_read_dynamic_info): Check that BFD had DYNAMIC flag set.
	Clear info->canonical_dynsym and info->canonical_dynrel.
	(MY(read_dynamic_symbols)): Removed.
	(MY(read_dynamic_relocs)): Removed.
	(sunos_get_dynamic_symtab_upper_bound): New function.
	(sunos_canonicalize_dynamic_symtab): New function.
	(sunos_get_dynamic_reloc_upper_bound): New function.
	(sunos_canonicalize_dynamic_reloc): New function.
	* libaout.h: Declare struct reloc_ext_external and
	reloc_std_external to avoid prototype problems.
	(struct aout_backend_data): Remove fields read_dynamic_symbols and
	read_dynamic_relocs.
	(NAME(aout,translate_symbol_table)): Declare.
	(NAME(aout,swap_ext_reloc_in)): Declare.
	(NAME(aout,swap_std_reloc_in)): Declare.
	* aoutx.h (NAME(aout,translate_symbol_table)): Renamed from
	translate_symbol_table and made non-static.  Changed all callers.
	(NAME(aout,slurp_symbol_table)): Don't read dynamic symbols.
	(NAME(aout,slurp_reloc_table)): Don't read dynamic relocs.
	(NAME(aout,get_reloc_upper_bound)): Don't count dynamic relocs.
	* aoutf1.h (aout_32_sunos4_write_object_contents): Don't bother to
	remove dynamic symbols and relocs.  They will no longer be
	present.
	(MY_read_dynamic_symbols): Don't define.
	(MY_read_dynamic_relocs): Don't define.
	(sunos4_aout_backend): Don't initialize dynamic entry points.
	* aout-target.h (MY_read_dynamic_symbols): Don't define.
	(MY_read_dynamic_relocs): Don't define.
	(MY(backend_data)): Don't initialize dynamic entry points.
	(MY_get_dynamic_symtab_upper_bound): If not defined, define to
	_bfd_nodynamic version.
	(MY_canonicalize_dynamic_symtab): Likewise.
	(MY_get_dynamic_reloc_upper_bound): Likewise.
	(MY_canonicalize_dynamic_reloc): Likewise.
	* All backends: Added BFD_JUMP_TABLE_DYNAMIC to target vector.
	* bfd-in2.h: Rebuilt.
	* libbfd.h: Rebuilt.

	* cf-m68klynx.c: Include sysdep.h.

	* hp300hpux.c: Removed some spaces in uses of NAME to avoid
	problems with traditional C compilers.

	* targets.c (bfd_target): Rearranged fields in target vector.
	Removed _bfd_debug_info_start, _bfd_debug_info_end and
	_bfd_debug_info_accumulate, which were never used.
	(BFD_JUMP_TABLE_GENERIC, BFD_JUMP_TABLE_COPY): Defined.
	(BFD_JUMP_TABLE_CORE, BFD_JUMP_TABLE_ARCHIVE): Defined.
	(BFD_JUMP_TABLE_SYMBOLS, BFD_JUMP_TABLE_RELOCS): Defined.
	(BFD_JUMP_TABLE_WRITE, BFD_JUMP_TABLE_LINK): Defined.
	* All backends: Changed to use the new BFD_JUMP_TABLE_* macros
	rather than the single JUMP_TABLE macro.  Removed many of the
	weird macro definitions needed to support the monolithic
	JUMP_TABLE.
	* bfd-in.h (JUMP_TABLE): Removed.
	* libbfd-in.h: Define a bunch of macros, and declare a few
	functions, for use with the new BFD_JUMP_TABLE_* macros.
	* libbfd.c (_bfd_dummy_new_section_hook): Removed.
	(bfd_false): Set bfd_error_invalid_operation.
	(bfd_nullvoidptr): Likewise.
	(bfd_n1): New function.
	(_bfd_nocore_core_file_matches_executable_p): Renamed from
	_bfd_dummy_core_file_matches_executable_p.
	(_bfd_nocore_core_file_failing_command): Similar rename.  Set
	bfd_error_invalid_operation.
	(_bfd_nocore_core_file_failing_signal): Likewise.
	(_bfd_generic_get_section_contents): Renamed from
	bfd_generic_get_section_contents.  Changed all callers.
	(_bfd_generic_set_section_contents): Similar rename.
	* ieee.c: #if 0 out ieee_bfd_debug_info_start,
	ieee_bfd_debug_info_end, ieee_bfd_debug_info_accumulate.  They
	were never called.
	* bfd-in2.h: Rebuilt.
	* libbfd.h: Rebuilt.

Tue Apr  5 22:10:04 1994  Jeffrey A. Law  ([email protected])

	* Crude support for examining dynamic libraries.
	* som.c (som_object_setup): Set DYNAMIC flag for SHL_MAGIC and
	DL_MAGIC objects.
	(som_prep_headers): Preserve the system_id for DYNAMIC objects.
	Use SHL_MAGIC as the magic number of the DYNAMIC flag is set.
	Write exec headers for DYNAMIC objects.
	(som_begin_writing): DYNAMIC objects have the same alignment
	restrictions as D_PAGED objects.
	(bfd_section_from_som_symbol): Treat DYNAMIC objects like EXEC_P
	objects.
	(object_flags): Add DYNAMIC.

Tue Apr  5 17:48:52 1994  Stan Shebs  ([email protected])

	* i386lynx.c, sparclynx.c (NAME): Remove embedded whitespace in
	macro uses, confuses some non-ANSI compilers.

Tue Apr  5 15:50:01 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_bfd_free_cached_info): Add missing PARAMS decl.
	Don't free anything if we don't have a bfd_object.
	(som_close_and_cleanup): Call som_bfd_free_cached_info.

Tue Apr  5 11:22:38 1994  Ian Lance Taylor  ([email protected])

	* elf32-mips.c (mips_elf_final_link): Don't remove empty sections.
	It turns out not to be required on Irix 5, and it causes problems
	if the sections happen to contain symbols.

	* elfcode.h (write_shdrs_and_ehdr): Correct bfd_write check.

	* aoutx.h (NAME(aout,canonicalize_reloc)): Don't error out if
	section->relocation is NULL; malloc might have returned NULL when
	given a zero size if there were no relocations.
	* bout.c (b_out_canonicalize_reloc): Likewise.
	* coffcode.h (coff_canonicalize_reloc): Likewise.
	* ecoff.c (ecoff_canonicalize_reloc): Likewise.
	* elfcode.h (elf_canonicalize_reloc): Likewise.
	* mipsbsd.c (MY(canonicalize_reloc)): Likewise.
	* i386lynx.c (NAME(lynx,canonicalize_reloc)): Likewise.
	* nlmcode.h (nlm_canonicalize_reloc): Likewise.
	* som.c (som_canonicalize_reloc): Likewise.
	* hp300hpux.c (MY(slurp_reloc_table)): Likewise.  Also, if malloc
	returns NULL, don't report an error if we asked for zero bytes.
	* i386lynx.c (NAME(lynx,slurp_reloc_table)): If malloc returns
	NULL, don't report an error if we asked for zero bytes.
	* nlmcode.h (nlm_slurp_reloc_fixups): Likewise.

Mon Apr  4 15:30:49 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (NAME(aout,bfd_free_cached_info)): Don't free anything
	if we don't have a bfd_object.

	Made sure that every call to bfd_read, bfd_write, and bfd_seek
	checks the return value and handled bfd_error correctly.  These
	changes are not itemised.  Also:
	* aoutx.h (emit_strtab): Change return type to boolean, and return
	errors.
	(NAME(aout,write_syms)): Check emit_strtab return value.
	(NAME(aout,final_link)): Likewise.
	* coffcode.h (coff_write_relocs): Change return type to boolean,
	and return errors.
	(coff_write_object_contents): Check coff_write_relocs return
	value.
	* i386os9k.c (os9k_swap_exec_header_in): Change return type to
	boolean.
	(os9k_object_p): Check os9k_swap_exec_header_in return value.
	* oasys.c (oasys_read_record): Change return type to boolean.
	(oasys_slurp_symbol_table: Check oasys_read_record return value.
	(oasys_object_p, oasys_slurp_section_data): Likewise.
	(oasys_write_record): Change return type to boolean.
	(oasys_write_syms): Likewise.  Also, check oasys_write_record
	return value.
	(oasys_write_sections): Check oasys_write_record return value.
	(oasys_write_header): Change return type to boolean.  Check
	oasys_write_record return value.
	(oasys_write_end, oasys_write_data): Likewise.
	(oasys_write_object_contents): Check return values of
	oasys_write_header, oasys_write_syms, oasys_write_data, and
	oasys_write_end.
	* srec.c (srec_write_record): Change return type to boolean.
	(srec_write_header): Likewise.  Also, check srec_write_record
	return value.
	(srec_write_section, srec_write_terminator): Likewise.
	(srec_write_symbols): Change return type to boolean.
	(internal_srec_write_object_contents): Check return value of
	srec_write_symbols, srec_write_header, srec_write_section, and
	srec_write_terminator.

	* Makefile.in: Rebuilt dependencies.

Mon Apr  4 10:56:45 1994  Peter Schauer  ([email protected])

	* aix386-core.c (aix386_bfd_is_local_label):  Correct cast from
	asection to asymbol.
	* ptrace-core.c (ptrace_unix_bfd_is_local_label):  Correct cast from
	bfd to asymbol.
	* trad-core.c (trad_unix_bfd_is_local_label):  Correct cast from
	asection to asymbol.

Sun Apr  3 18:27:29 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_slurp_string_table): Use malloc to allocate space
	for the cached copy of the native string table.
	(som_slurp_symbol_table): Likewise for the native symbol table.
	(som_slurp_reloc_table): Likewise for the native and generic
	relocation tables.
	(som_bfd_free_cached_info): Free the cached native strings,
	symbols, and relocations.  Also free the canonical cached
	relocations.

Fri Apr  1 12:40:58 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (aout_link_write_symbols): If keep_memory is false, make
	sure the symbol name is stored in permanent memory before adding
	it to the string table.

	* archive.c (_bfd_write_archive_contents): Once we've found an
	object, don't bother to look for more when deciding whether to
	build a map.
	(compute_and_write_armap): After adding the symbols for a BFD,
	call bfd_free_cached_info on it.

	Add bfd_free_cached_info support to a.out backends.
	* aoutx.h (aout_get_external_symbols): Renamed from
	aout_link_get_symbols.  Read strings even if symbols have been
	read.  Store string size in obj_aout_string_size.
	(NAME(aout,slurp_symbol_table)): Call aout_get_external_symbols to
	read the symbols.  Allocate the cached symbols with malloc, not
	bfd_alloc.
	(NAME(aout,slurp_reloc_table)): Allocate the cached relocs with
	malloc, not bfd_alloc.
	(NAME(aout,bfd_free_cached_info)): New function; free cached
	symbols and relocs.
	* libaout.h (struct aoutdata): Add external_string_size field.
	(obj_aout_external_string_size): New accessor macro.
	(NAME(aout,close_and_cleanup)): Don't declare.
	(NAME(aout,bfd_free_cached_info)): Declare.
	(aout_32_close_and_cleanup): Don't define.
	(aout_64_close_and_cleanup): Don't define.
	* aout-target.h (MY_bfd_free_cached_info): If not already defined,
	define as NAME(aout,free_cached_info).
	(MY_close_and_cleanup): If not already defined, define as
	MY_bfd_free_cached_info.
	* aout-adobe.c (aout_32_close_and_cleanup): Define.
	(aout_32_bfd_free_cached_info): Don't define.
	* bout.c (aout_32_close_and_cleanup): Define.
	(aout_32_bfd_free_cached_info): Don't define.
	* hp300hpux.c (MY_bfd_free_cached_info): Define as bfd_true.
	(MY_close_and_cleanup): Don't define.
	* i386lynx.c (NAME(lynx,slurp_reloc_table)): Allocate the cached
	relocs with malloc, not bfd_alloc.
	* i386os9k.c (aout_32_close_and_cleanup): Define.
	(aout_32_bfd_free_cached_info): Don't define.

	Add a new entry point to free memory cached by a BFD.
	* targets.c (bfd_target): Add _bfd_free_cached_info field.
	* bfd.c (bfd_free_cached_info): Define.
	* bfd-in.h (JUMP_TABLE): Add _bfd_free_cached_info.
	* bfd-in2.h: Rebuilt.
	* All backends: Initialize bfd_free_cached_info entry point to
	bfd_true.

	* elf32-hppa.c (elf_hppa_reloc_type_lookup): Correct type of
	first, unused, argument.
	(hppa_elf_is_local_label): Declare instead of
	som_bfd_is_local_label.

	* coff-a29k.c (a29k_reloc): Add reloc_entry->address to value of
	absolute R_IREL reloc.

Thu Mar 31 11:52:15 1994  Ian Lance Taylor  ([email protected])

	Added some support for Irix 4 shared libraries.
	* ecoff.c (ecoff_new_section_hook): Set SEC_SHARED_LIBRARY for a
	.lib section.
	(ecoff_sec_to_styp_flags): Set SEC_SHARED_LIBRARY if
	STYP_ECOFF_LIB bit is set.
	(ecoff_compute_section_file_positions): Round the contents of a
	.lib section up to the next page boundary.
	(ecoff_set_section_contents): If we see a .lib section, increment
	the vma by one to count the number of shared libraries we have.
	(ecoff_write_object_contents): Don't crash if we see a
	STYP_ECOFF_LIB section, and don't adjust text_start or data_start
	or bss_size either.

	* coffcode.h (CALC_ADDEND): Change to fetch original symbol value
	from original BFD, rather than using value of current BFD symbol.
	Needed for new linker.
	* coff-sparc.c (CALC_ADDEND): Likewise.

	* ecoff.c (ecoff_write_object_contents): Set the text_start and
	data_start entries in the optional header correctly even if a text
	or data section starts at location zero.

	* reloc.c (bfd_reloc_code_real_type): Added BFD_RELOC_26 (from sef
	and raeburn).
	* bfd-in2.h: Rebuilt.

	* nlm32-i386.c (nlm_i386_read_import): Null terminate the symbol
	name.
	* nlm32-alpha.c (nlm_alpha_read_import): Likewise.
	* nlm32-sparc.c (nlm_sparc_read_import): Likewise.

	* coffgen.c (coff_write_symbol): Reindented.  Changed to return
	boolean, and changed written to unsigned int *.  Check error
	returns from called functions.
	(coff_write_alien_symbol): Likewise.
	(coff_write_native_symbol): Likewise.
	(coff_write_symbols): Likewise.  Reworked checks on whether to
	write symbol name to string table for clarity and to avoid core
	dumping when given a non COFF symbol.
	* libcoff-in.h (coff_write_symbols): Declare as returning boolean.
	* libcoff.h: Rebuilt.
	* coffcode.h (coff_write_object_contents): Check return value of
	coff_write_symbols.

Wed Mar 30 16:25:41 1994  Ian Lance Taylor  ([email protected])

	Changes to let BFD return an error indication from
	get_symtab_upper_bound, bfd_canonicalize_symtab,
	bfd_get_reloc_upper_bound, and bfd_canonicalize_reloc.  They now
	return long instead of unsigned int, and use -1 to indicate an
	error.  Along the way, rename get_symtab_upper_bound to
	bfd_get_symtab_upper_bound.
	* bfd.c (bfd_get_reloc_upper_bound): Return long, and -1 on
	errors.
	(bfd_canonicalize_reloc): Likewise.
	* syms.c (bfd_get_symtab_upper_bound): Renamed from
	get_symtab_upper_bound.
	* targets.c (bfd_target): Renamed _get_symtab_upper_bound to
	_bfd_get_symtab_upper_bound, and changed it and
	_bfd_canonicalize_symtab and _get_reloc_upper_bound and
	_bfd_canonicalize_reloc to all return long.
	* aoutx.h (NAME(aout,get_symtab)): Return long, and -1 on errors.
	(NAME(aout,canonicalize_reloc)): Likewise.
	(NAME(aout,get_reloc_upper_bound)): Likewise.
	(NAME(aout,get_symtab_upper_bound)): Likewise.
	* bout.c (b_out_canonicalize_reloc): Likewise.
	(b_out_get_reloc_upper_bound): Likewise.
	* coffcode.h (coff_canonicalize_reloc): Likewise.
	* coffgen.c (coff_get_symtab_upper_bound): Likewise.
	(coff_get_symtab): Likewise.
	(coff_get_reloc_upper_bound): Likewise.
	* ecoff.c (ecoff_get_symtab_upper_bound): Likewise.
	(ecoff_get_symtab): Likewise.
	(ecoff_canonicalize_reloc): Likewise.
	* elfcode.h (elf_get_symtab_upper_bound): Likewise.
	(elf_get_reloc_upper_bound): Likewise.
	(elf_canonicalize_reloc): Likewise.
	(elf_get_symtab): Likewise.
	* hp300hpux.c (MY(get_symtab)): Likewise.
	(MY(get_symtab_upper_bound)): Likewise.
	(MY(canonicalize_reloc)): Likewise.
	* i386lynx.c (NAME(lynx,canonicalize_reloc)): Likewise.
	* ieee.c (ieee_slurp_external_symbols): Change return type to
	boolean.  Check for errors from get_symbol.
	(ieee_slurp_symbol_table): Change return type to boolean.  Check
	for errors from ieee_slurp_external_symbols.
	(ieee_get_symtab_upper_bound): Return long, and -1 on errors.
	(ieee_get_symtab): Likewise.
	(ieee_get_reloc_upper_bound): Likewise.
	(ieee_canonicalize_reloc): Likewise.
	* mipsbsd.c (MY(canonicalize_reloc)): Likewise.
	* nlmcode.h (nlm_get_symtab_upper_bound): Likewise.
	(nlm_get_symtab): Likewise.
	(nlm_get_reloc_upper_bound): Likewise.
	(nlm_canonicalize_reloc): Likewise.
	* oasys.c (oasys_get_symtab_upper_bound): Likewise.
	(oasys_get_symtab): Likewise.
	(oasys_get_reloc_upper_bound): Likewise.
	(oasys_canonicalize_reloc): Likewise.
	* som.c (som_get_symtab_upper_bound): Likewise.
	(som_get_symtab): Likewise.
	(som_get_reloc_upper_bound): Likewise.
	(som_canonicalize_reloc): Likewise.
	* srec.c (srec_get_symtab_upper_bound): Likewise.
	(srec_get_symtab): Likewise.
	(srec_get_reloc_upper_bound): Define as bfd_0l.
	(srec_canonicalize_reloc): Likewise.
	* tekhex.c (tekhex_get_symtab): Return long, and -1 on errors.
	(tekhex_get_symtab_upper_bound): Likewise.
	(tekhex_get_reloc_upper_bound): Define as bfd_0l.
	(tekhex_canonicalize_reloc): Likewise.
	* libaout.h (NAME(aout,get_symtab_upper_bound)): Change
	declaration to return long.
	(NAME(aout,get_symtab)): Likewise.
	(NAME(aout,canonicalize_reloc)): Likewise.
	(NAME(aout,get_reloc_upper_bound)): Likewise.
	* libcoff-in.h (coff_get_symtab_upper_bound): Likewise.
	(coff_get_symtab): Likewise.
	(coff_get_reloc_upper_bound): Likewise.
	* libecoff.h (ecoff_get_symtab_upper_bound): Likewise.
	(ecoff_get_symtab): Likewise.
	(ecoff_canonicalize_reloc): Likewise.
	* libelf.h (bfd_elf32_get_symtab_upper_bound): Likewise.
	(bfd_elf32_get_symtab): Likewise.
	(bfd_elf32_get_reloc_upper_bound): Likewise.
	(bfd_elf32_canonicalize_reloc): Likewise.
	(bfd_elf64_get_symtab_upper_bound): Likewise.
	(bfd_elf64_get_symtab): Likewise.
	(bfd_elf64_get_reloc_upper_bound): Likewise.
	(bfd_elf64_canonicalize_reloc): Likewise.
	* libnlm.h (nlmNAME(get_symtab_upper_bound)): Likewise.
	(nlmNAME(get_symtab)): Likewise.
	(nlmNAME(get_reloc_upper_bound)): Likewise.
	(nlmNAME(canonicalize_reloc)): Likewise.
	* archive.c (compute_and_write_armap): Use error_return and
	no_memory_return labels rather than freeing information in various
	places.  Change storage, symcount and src_count to long.  Check
	errors from bfd_get_symtab_upper_bound and
	bfd_canonicalize_symtab.
	* bout.c (b_out_relax_section): Change reloc_size to long.  Check
	for errors from bfd_get_reloc_upper_bound and
	bfd_canonicalize_reloc.
	(b_out_get_relocated_section_contents): Likewise.
	* coff-alpha.c (alpha_ecoff_get_relocated_section_contents):
	Likewise.
	* elf32-mips.c: Likewise.
	* elf32-hppa.c (hppa_elf_stub_finish): Likewise.
	(hppa_look_for_stubs_in_section): Check for errors from
	bfd_get_symtab_upper_bound, bfd_canonicalize_symtab, and
	bfd_canonicalize_reloc.
	* ecofflink.c (bfd_ecoff_debug_accumulate_other): Check for errors
	from bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
	* linker.c (generic_link_read_symbols): Likewise.
	(_bfd_generic_final_link): Check for errors from
	bfd_get_reloc_upper_bound and bfd_canonicalize_reloc.
	* reloc.c (bfd_generic_get_relocated_section_contents): Likewise.
	* reloc16.c (bfd_coff_reloc16_relax_section): Likewise.
	(bfd_coff_reloc16_get_relocated_section_contents): Likewise.
	* libbfd.c (bfd_0l): New function.
	* libbfd-in.h (bfd_0l): Declare.
	* aix386-core.c: Change get_symtab_upper_bound, get_symtab,
	get_reloc_upper_bound, and canonicalize_reloc to use bfd_0l rather
	than bfd_0u.
	* cisco-core.c, hppabsd-core.c, hpux-core.c: Likewise.
	* irix-core.c, osf-core.c, ptrace-core.c, trad-core.c: Likewise.
	* bfd-in2.h: Rebuilt.
	* libbfd.h: Rebuilt.
	* libcoff.h: Rebuilt.

	* nlm32-sparc.c (nlm_sparc_read_reloc): Remove unused variables
	temp and name.

Wed Mar 30 08:33:04 1994  Jim Kingdon  ([email protected])

	* hosts/dpx2.h: Define POSIX_UTIME.

Wed Mar 30 00:31:49 1994  Peter Schauer  ([email protected])

	* i386dynix.c, config/i386-dynix.mt:  New files, handling Dynix
	variant of a.out.
	* configure.in, config.bfd:  Use them for Dynix.
	* Makefile.in:  Add dependencies for i386dynix.o. 
	* targets.c:  Add definition for i386dynix_vec.
	* hosts/symmetry.h:  Do not define TRAD_CORE_USER_OFFSET for Dynix.
	Define HOST_DATA_START_ADDR and TRAD_UNIX_CORE_FILE_FAILING_SIGNAL
	for Dynix. Remove inclusion of dynix3.h, Dynix bfd is now handled by
	i386dynix.c

Mon Mar 28 12:53:27 1994  Ian Lance Taylor  ([email protected])

	* Makefile.in (BFD32_BACKENDS): Add coff-sparc.o.

	* coffcode.h (coff_set_flags): Handle bfd_arch_powerpc like
	bfd_arch_rs6000.

	* config.bfd (powerpc-*-aix*): New target; use rs6000.mt.
	* config/rs6000.mt (SELECT_ARCHITECTURES): Add bfd_powerpc_arch.

	* aoutx.h (translate_from_native_sym_flags): Set SEC_RELOC flag
	for generated constructor section.

Sun Mar 27 16:25:22 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_begin_writing): New approach at dealing with holes
	in executables left by the HP linker.  Does not rely on subspace
	alignments as subspaces are *NOT* guaranteed to be properly
	aligned in an executable (can you believe that!).

Sat Mar 26 10:25:43 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_get_section_contents): New function.  Do not try
	to actually read data from a section that doesn't have either
	SEC_LOAD or SEC_DEBUGGING set (eg $BSS$) just return true.

        * libbfd.c (bfd_read): Set bfd_error as appropriate for a short
	read. (bfd_error_system_call or bfd_error_file_truncated).

	* som.c: Do not blindly set bfd_error_system_call after a
	failing bfd_read, bfd_write, or bfd_seek.  In a few places
	(like som_object_p) override the error status set by bfd_read.

	* aix386-core.c, aout-encap,c archive.c, bout.c: Likewise.
	* coff-rs6000.c, coffgen.c ecoff.c, elf.c: Likewise.
	* elf32-hppa.c, elfcode.h, hp300hpux.c, i386lynx.c: Likewise.
	* nlm32-alpha.c, nlm32-i386.c, nlm32-sparc.c: Likewise.

	* som.c: Check return values from several bfd_{seek,read,write}
	calls that we just assumed were not failing.

Fri Mar 25 11:44:06 1994  Jim Kingdon  ([email protected])

	* hosts/sysv4.h (HAVE_PROCFS): Add comments about ptx4.
	* config/sysv4.mh: Add comment.
	* config/symmetry.mh: Change comment.
	* configure.host: Use sysv4, not symmetry, for i[34]86-sequent-sysv4*.

Fri Mar 25 17:10:45 1994  Ian Lance Taylor  ([email protected])

	Changes to support linker relaxing of embedded MIPS PIC code to
	use a five instruction sequence for function calls which are out of
	range of the bal instruction.
	* libecoff.h (struct ecoff_section_tdata): Define.
	(ecoff_section_data): Define.
	(ecoff_bfd_relax_section): Don't define.
	* ecoff.c (ecoff_final_link_debug_accumulate): Don't read or free
	the debugging information if it has already been read.
	(ecoff_indirect_link_order): Handle _cooked_size being different
	from _raw_size.  Don't reread the contents or the relocs if they
	have already been read in.
	* coff-mips.c (mips_howto_table): Change bitsize of PCREL16 from
	18 to 16.
	(PCREL16_EXPANSION_ADJUSTMENT): Define.
	(mips_relocate_refhi): Take adjust argument.
	(mips_relocate_section): Handle reloc offsets stored in section
	used_by_bfd field.  Call mips_relax_pcrel16 to handle details of
	expanding an out of range PCREL16.  Keep trace of adjustments
	required by expansions.  Set s and unset h when converting a reloc
	from undefined to section.  Change handling of PC relative relocs:
	if against a section, they are correct in the object file, if
	against an external symbol they are pcrel_offset.
	(mips_relax_section): New function.
	(mips_relax_pcrel16): New function.
	(ecoff_bfd_relax_section): Define.
	* coff-alpha.c (ecoff_bfd_relax_section): Define.
	* ecofflink.c (bfd_ecoff_debug_accumulate): Handle adjustments
	built by mips_relax_section when writing out addresses.
	* elf32-mips.c (mips_elf_read_ecoff_info): Clear adjust field.

	* aoutx.h (NAME(aout,find_nearest_line)): The caller expects
	functionname_ptr to be set to a symbol name, so prepend
	symbol_leading_char.

Thu Mar 24 11:33:46 1994  Steve Chamberlain  ([email protected])

	* coff-h8300.c (h8300_reloc16_extra_cases): Add relaxing info
	for 16bit relative branches.
	* coff-h8500.c (r_high8, r_low16, r_high16): Don't complain on
	overflow.

Thu Mar 24 09:21:13 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_bfd_prep_for_ar_write): Ignore non-SOM objects.
	(som_bfd_ar_write_symbol_stuff, som_write_armap): Likewise.

Wed Mar 23 14:29:31 1994  David J. Mackenzie  ([email protected])

	* netbsd386.c (N_SET_FLAGS): Delete the old definition.

Wed Mar 23 14:58:44 1994  Ian Lance Taylor  ([email protected])

	Clean up the relaxing code for the new linker.
	* targets.c (_bfd_relax_section): Take boolean *again argument
	rather than asymbol list.
	* bfd.c (bfd_relax_section): Change name of fourth argument from
	symbols to again.
	* reloc.c (bfd_generic_relax_section): Take boolean *again
	argument rather than asymbol list.  Always return true.
	* bout.c: Include genlink.h.
	(aligncode, perform_slip): Declare.
	(perform_slip): Take BFD argument rather than asymbol list.
	Changed all callers.  Get the symbols from the BFD.  Change the
	hash table entry value as well as the symbol value.
	(abs32code): Take BFD argument rather than asymbol list.  Changed
	all callers.
	(aligncode): Likewise.
	(b_out_relax_section): Take boolean *again argument rather than
	asymbol list.  Only return false if an error occurred.  Set *again
	to false.  Get symbols from BFD.
	* reloc16.c: Include genlink.h.
	(bfd_perform_slip): Take BFD argument rather than asymbol list.
	Get the symbols from the BFD.  Change the hash table entry value
	as well as the symbol value.
	(bfd_coff_reloc16_relax_section): Take boolean *again argument
	rather than asymbol list.  Only return false if an error occurred.
	Set *again to false.  Get symbols from BFD.
	* coffcode.h (bfd_coff_backend_data): Change
	_bfd_coff_reloc16_estimate to take BFD argument rather than
	asymbol list.
	(bfd_coff_reloc16_estimate): Corresponding change.
	(dummy_reloc16_estimate): Corresponding change.
	* libcoff-in.h (bfd_coff_reloc16_relax_section): Change
	declaration to take boolean * rather than asymbol list.
	(bfd_perform_slip): Change declaration to take BFD rather than
	asymbol list.
	* coff-h8300.c (h300_reloc16_estimate): Take BFD argument rather
	than asymbol list.  Changed calls to bfd_perform_slip.
	* bfd-in2.h: Rebuilt.
	* libbfd.h: Rebuilt.
	* libcoff.h: Rebuilt.
	* Makefile.in: Rebuilt dependencies.

	* genlink.h (_bfd_generic_link_get_symbols): Define.
	(_bfd_generic_link_get_symcount): Define.
	* linker.c (generic_link_read_symbols): New function.
	(generic_link_add_object_symbols): Use it.  Use
	_bfd_generic_link_get_symbols and _bfd_generic_link_get_symcount
	to get the symbols from the BFD.
	(generic_link_check_archive_element): Likewise.
	(_bfd_generic_final_link): Likewise.
	(_bfd_generic_link_output_symbols): Likewise.
	(default_indirect_link_order): Likewise.
	(generic_link_add_symbol_list): Store pointer to hash table entry
	in asymbol udata field.

Tue Mar 22 13:09:44 1994  Ian Lance Taylor  ([email protected])

	* coff-mips.c (mips_howto_table): Add entry for new MIPS_R_PCREL16
	reloc, used in embedded PIC code.
	(mips_adjust_reloc_in): Change sanity check to permit new reloc.
	(mips_bfd_reloc_type_lookup): Turn BFD_RELOC_16_PCREL_S2 into
	MIPS_R_PCREL16.

	* elf32-mips.c (mips_elf_final_link): Account for link_order
	relocs when allocating space for relocations.  Set SEC_RELOC flag
	for any section which has relocs.  Handle link_order relocs in
	link_order loop.  Use _bfd_generic_link_add_symbols_collect for
	add_symbls entry point.

	* linker.c (_bfd_generic_final_link): Set reloc_count to 0 before
	counting relocs.  Set SEC_RELOC flag for any section which has
	relocs.

	* linker.c (_bfd_default_link_order): Handle bfd_data_link_order.

	* linker.c (_bfd_generic_link_add_symbols): Just call
	generic_link_add_symbols.
	(_bfd_generic_link_add_symbols_collect): New function, like
	_bfd_generic_link_add_symbols but also collect constructors and
	destructors by name as collect2 does.
	(generic_link_add_symbols): New function, like old
	_bfd_generic_link_add_symbols but with collect argument.
	(generic_link_add_object_symbols): Take collect argument.
	(generic_link_check_archive_element_no_collect): New function.
	(generic_link_check_archive_element_collect): New function.
	(generic_link_check_archive_element): Take collect argument.
	(generic_link_add_symbol_list): Take collect argument.
	(_bfd_generic_link_add_one_symbol): Rename constructor argument to
	collect.
	* libbfd-in.h (_bfd_generic_link_add_symbols_collect): Declare.
	* libbfd.h: Rebuilt.

Tue Mar 22 10:04:00 1994  Jeffrey A. Law  ([email protected])

	* archive.c (bfd_construct_extended_name_table): Use ar_padchar
	for first character in an extended name.
	(_bfd_write_archive_contents): If ar_padchar == '/', then use
	"//" as the name of the special archive member holding the
	extended name table.

Mon Mar 21 12:28:19 1994  Ian Lance Taylor  ([email protected])

	Support for link_order types which generate relocs in order to
	support -Ur in the linker.
	* linker.c (generic_link_add_symbol_list): Remove bitsize argument
	from call to _bfd_generic_link_add_one_symbol.
	(_bfd_generic_link_add_one_symbol): Remove bitsize argument.
	Don't pass bitsize to constructor call back.  Pass BFD_RELOC_CTOR
	instead of bitsize to add_to_set call back.
	(_bfd_generic_final_link): Account for link_order relocs when
	allocating space for relocations.  Handle them in link_order loop.
	(_bfd_generic_reloc_link_order): New function.
	(_bfd_default_link_order): If a reloc_link_order is seen here,
	abort.
	(_bfd_count_link_order_relocs): New function.
	* libbfd-in.h (_bfd_generic_link_add_one_symbol): Remove bitsize
	argument from declaration.
	(_bfd_generic_reloc_link_order): Declare.
	(_bfd_count_link_order_relocs): Declare.
	* libbfd.h: Rebuilt.
	* aoutx.h (aout_link_add_symbols): Remove bitsize argument from
	call to _bfd_generic_link_add_one_symbol.
	(NAME(aout,final_link)): Account for link_order relocs when
	allocating space for relocations.  Handle them after handling all
	input BFDs.
	(aout_link_reloc_link_order): New function.
	* ecoff.c (ecoff_link_add_externals): Remove bitsize argument from
	call to _bfd_generic_link_add_one_symbol.
	(ecoff_bfd_final_link): Account for link_order relocs when
	allocating space for relocations.  Handle them in link_order loop.
	(ecoff_link_write_external): Set the storage class of a defined
	linker created symbol based on the section it is in.  Correct
	bfd_link_hash_weak case to use .sc rather than .st.
	(ecoff_reloc_link_order): New function.
	* coff-alpha.c (alpha_bfd_reloc_type_lookup): Handle
	BFD_RELOC_CTOR.
	* coff-mips.c (mips_bfd_reloc_type_lookup): Likewise.

	* sunos.c (sunos_read_dynamic_info): Remove unused locals dynsym
	and buf.

	* cisco-core.c (cisco_core_file_p): Only pass one argument to
	bfd_zmalloc.  Free a pointer, not a union.
	(cisco_bfd_is_local_label): Correct cast from asection to asymbol.

Sun Mar 20 09:24:36 1994  Jeffrey A. Law  ([email protected])

	* bfd/som.c (som_begin_writing): Fix thinko (off by one error).

	* som.c (bfd_section_from_som_symbol): Only to do the value
	comparison for function symbols within executables.

	* som.c (bfd_section_from_som_symbol): Renamed from
	som_section_from_subspace_index.  Pass in a native SOM symbol.
	For executables, iterate through the sections to find out
	which contains the symbol's address rather than using the
	symbol_info field.  (symbol_info has a different meaning for
	dynamicly linked executables.)

	* trad-core.c (trad_unix_core_file_p): Don't pass abfd to
	bfd_zmalloc.

	* som.c (som_begin_writing): Fix braino (one call to align
	space/subspace data was done unconditionally rather than
	just for executables.)

	* som.c (som_begin_writing): Align text in all executables to
	make HPUX kernel happy.  Fixes strip/objcopy for shared
	executables.

Sat Mar 19 07:06:59 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_begin_writing): Account for alignment needs of
	subspaces too when writing executables.  Never request a negative
	bss size.  Fixes some problems with demand paged executables,
	still having problems with pure executables and shared executables.

Fri Mar 18 19:12:47 1994  Jim Kingdon  ([email protected])

	* trad-core.c (trad_unix_core_file_p): Call bfd_zmalloc not
	bfd_zalloc for rawptr, because later on we may call free, not
	bfd_release, on it.

	* bfd.c (struct _bfd): Add cisco_core_struct to tdata union.
	* libbfd.c (bfd_read, bfd_seek): Add comments regarding errors.
	* cisco-core.c: New file.
	* Makefile.in: Change accordingly.
	* configure.in: Recognize cisco_core_vec.
	* config/m68k-aout.mt (SELECT_VECS): Add cisco_core_vec.
	* targets.c: Add cisco_core_vec.
	* bfd-in2.h: Rebuilt.

Fri Mar 18 18:13:49 1994  Jeffrey A. Law  ([email protected])

	* som.h (som_copyable_section_data_struct): New structure
	containing all the private section information which needs
	to be copied from input section to output section during
	objcopy or strip.
	(som_section_data_struct): Remove several fields now in
	som_copyable_section_data_struct.  Make the space and 
	subspace dictionaries be pointers (to save space when
	only reading objects).

	* som.c (bfd_som_set_section_attributes): Now returns a boolean;
	some references changed.  Allocate a copyable data stucture if
	none exists.  Store info into the copyable data structure.
	(bfd_som_set_subsection_attributes): Likewise.
	(som_is_space, som_is_subspace, som_is_container): New functions.
	Use these instead of directly accessing private data.
	(som_prep_headers): Allocate space and subspace headers here.
	Fill in some fields in the space/subspace headers from the
	copyable data.
	(som_bfd_copy_private_section_data): Only copy the stuff
	that we really need to make objcopy and strip work.  Allocate
	the copy_data structure for the output bfd before copying.

	* som.h (struct som_exec_data): New structure to hold exec
	info that must be preserved when running objcopy/strip.
	(struct somdata): Add new "exec_data" field and accessor
	macro.  Add some comments on how the various fields are used.
	(som_section_data_struct): Make is_space and is_subspace bitfields.
	Delete unused subspace_index.  All references now use the
	target_index field within the section structure itself.

	* som.c (make_unique_section): Delete unused declaration.
	(som_bfd_copy_private_bfd_data): New function.
	(som_object_setup): Allocate space for and save exec information
	that needs to be copied during objcopy/strip.
	(som_mkobject): Do not allocate space for a file header here.
	It is not used when only reading SOM objects.
	(som_prep_headers): Allocate space for and attach a file header
	to the output bfd.  For executables, use the saved system_id
	value rather than trying to guess the right value.  Do not abort
	wwhen setting file_hdr->entry* for executables.
	(som_begin_writing): For executables, set the exec_entry and
	exec_flags fields.
	(som_copy_private_backend_section_data): Always return a value.

	* libhppa.h (PA_PAGESIZE): Define.

	* som.c (SOM_ALIGN): Define.
	(som_begin_writing): If writing an executable, initialize all
	fields in the exec header to zero.  Update fields in the exec
	header as sizes of loadable subspaces are computed.  Carefully
	preserve alignments when building executables.  Actually write the
	exec after all the fields are filled in.

        * Better long-filename handling.  Reads SOM ABI compliant extended
	names, but doesn't quite write compliant extended names yet.
	* som.c (som_slurp_extended_name_table): Delete function.  The
	generic code will handle things correctly.
	(som_slurp_armap): Seek to the beginning of the next member.
	(normalize): New function.
	(som_bfd_ar_write_symbol_stuff): Take the size of the extended
	name table into account when computing the file offsets in the
	SOM dictionary.  Make sure to align to an even boundary.
	(som_write_armap): Initialize the checksum to zero.
	(ar_maxchars): Fix.  Opps.

Fri Mar 18 20:35:24 1994  Ken Raeburn  ([email protected])

	* aoutx.h (reloc_type_lookup): Handle BFD_RELOC_CTOR on a 64-bit
	machine.  Handle BFD_RELOC_SPARC13 and BFD_RELOC_SPARC_BASE13.

Thu Mar 17 18:26:46 1994  Ken Raeburn  ([email protected])

	* bfd-in.h (BFD_VERSION): Use @VERSION@.
	* Makefile.in (bfd.h): Replace it with contents of VERSION file.
	* bfd-in2.h: Regenerated.

	* trad-core.c (trad_unix_bfd_is_local_label): Fixed typo where
	this was also named trad_unix_bfd_copy_private_bfd_data.

Thu Mar 17 10:37:07 1994  Jim Kingdon  ([email protected])

	* aoutx.h, elfcode.h, coff-alpha.c, bout.c, ecoff.c, ecofflink.c,
	elf32-hppa.c, elf32-mips.c, linker.c, som.c, sunos.c: If malloc(0)
	returns NULL, it is not an error.  It's possible that some of
	these checks are not necessary (because the size can never be
	zero), but putting in the checks is the conservative thing to do
	in light of the fact that some of these malloc calls replaced
	unchecked alloca calls, in which a zero argument would work fine.

Thu Mar 17 11:44:45 1994  Ian Lance Taylor  ([email protected])

	* osf-core.c (osf_core_bfd_copy_private_bfd_data): Remove
	duplicate definition.
	(osf_core_bfd_is_local_label): Define.

	* reloc.c (bfd_generic_get_relocated_section_contents): Don't fail
	if malloc (0) fails.  bfd_canonicalize_reloc returning 0 is not a
	failure indication, it merely means there are no relocs.

	* elfcode.h (NAME(bfd_elf,write_object_contents)): Don't use space
	after NAME, since SunOS /bin/cc can't handle it.

Wed Mar 16 16:43:33 1994  David J. Mackenzie  ([email protected])

	* netbsd386.c (N_SET_FLAGS): Don't nuke the machine id field.
	From [email protected] (Tasuki Hirata).

Wed Mar 16 07:55:54 1994  Jim Kingdon  ([email protected])

	* aoutf1.h (4 places): Use a simple #if on ARCH_SIZE, rather than
	all that convoluted stuff with NAME, CAT3, etc.  The convoluted
	stuff broke for SunOS4 /bin/cc (due to DEFUN elimination, I guess).

Wed Mar 16 00:02:05 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_prep_for_fixups): Detect section symbols based
	on either the lack of private data or the symbol flags.  Do not
	munge section symbol names anymore -- they no longer confuse GDB.
	(som_begin_writing): Leave space for an exec header if writing
	an executable.
	(som_slurp_symbol_table): Recognize both forms of section symbol
	names "L$0\002" and "$<FOO>$".  Change the name of "L$0\002"
	section symbols to be the name of the section they represent.
	Debugging  symbols begin with "L$0\001", not just "L$".

Tue Mar 15 22:58:28 1994  Jeffrey A. Law  ([email protected])

	* bfd-in2.h, libbfd.h, libcoff.h: Rebuilt.

	* bfd-in.h (JUMP_TABLE): Add new entries to the jump table
	for bfd_copy_private_section_data, bfd_copy_private_bfd_data,
	and bfd_is_local_label.

	* targets.c: Add new entries to the bfd_target structure.
	
	* bfd.c (bfd_copy_private_bfd_data): New definition.

	* section.c (bfd_copy_private_section_data): New definition.

	* syms.c (bfd_is_local_label): New definition.

	* libbfd-in.h (bfd_generic_is_local_label): Declare.

	* libbfd.c (bfd_generic_is_local_label): New function.

	* *-core.c: Provide default definitions for new functions in
	the target vector which all point to bfd_false.

	* aout-target.h, coffcode.h, elf32-target.h elf64-target.h, ieee.c
	libaout.h, libecoff.h, nlm-target.h, oasys.c, srec.c, tekhex.c
	Default new vectors for copying private backend data to bfd_true.
	Default new vector for determining if a symbol is a local label
	to bfd_generic_is_local_label.

	* som.c (som_bfd_copy_private_section_data): New function.
	(som_bfd_is_local_label): New function.
	(som_bfd_copy_private_bfd_data): For now default to bfd_true.

	* elf32-hppa.c (hppa_elf_is_local_label): New function.

Tue Mar 15 23:55:47 1994  Ian Lance Taylor  ([email protected])

	* cf-m68klynx.c (CALC_ADDEND): Use _bfd_m68klynx_howto_table.

Tue Mar 15 04:41:13 1994  David J. Mackenzie  ([email protected])

	* Most files:
	Replace DEFUN and DEFUN_VOID with K&R-style function definition.
	Indent some of them to GNU standards.

	* aout32.c, archures.c, core.c, cpu-h8300.c, cpu-i960.c,
	cpu-m68k.c, cpu-m88k.c, cpu-mips.c, cpu-vax.c, ctor.c, demo64.c,
	elf32-hppa.h, gen-aout.c, host-aout.c, init.c, libhppa.h,
	libieee.h, liboasys.h, newsos3.c, som.h, stab-syms.c, sunos.c:
	Update copyright years.

Mon Mar 14 11:41:23 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_prep_for_fixups): A relocation involving the section
	symbol for the *ABS* section is really a relocation involving
	no symbol.
	(som_slurp_symbol_table): Do not set BSF_GLOBAL or BSF_EXPORT for
	undefined symbols.  Correctly distinguish between debugger symbols
	and section symbols.

	* som (setup_sections): Set SEC_DEBUGGING and the section attributes
	for spaces and subspaces.

	* som.c (som_bfd_count_ar_symbols): Fix typo.

	* som.c (som_object_setup): Set EXEC_P, D_PAGED, WP_TEXT, and
	HAS_RELOC based on the object's magic number.
	(make_unique_section): Delete function.  BFD and its users are
	prepared to handle multiple sections with the same name.
	(setup_sections): Allocate space on the BFD's obstack to hold
	section names.  Use bfd_make_setion_anyway rather than the
	obsolete make_unique_section.
	(som_prep_headers): Choose the correct SOM magic number based
	on the BFD's flags.
	(som_bfd_fill_in_ar_symbols): Return false, not NULL on error.

Sat Mar 12 09:46:09 1994  Ian Lance Taylor  ([email protected])

	* elf32-ppc.c: Renamed from elf32-powerpc.c.
 	start-sanitize-powerpc-netware
	* nlm32-ppc.c: Renamed from nlm32-powerpc.c.
 	end-sanitize-powerpc-netware
	* Makefile.in, configure.in: Corresponding changes.

Fri Mar 11 22:27:19 1994  Ian Lance Taylor  ([email protected])

	* elf32-powerpc.c: Extensive changes to update to preliminary ABI.

Fri Mar 11 00:34:59 1994  Peter Schauer  ([email protected])

	* sunos.c (sunos_read_dynamic_info):  Assume that dynamic info
	is always located at the start of the data section to allow
	recovery of the dynamic info from a stripped executable.
	* ecoff.c (ecoff_styp_to_sec_flags):  Handle STYP_PDATA, STYP_XDATA
	and STYP_COMMENT.

Wed Mar  9 17:17:53 1994  Jim Kingdon  ([email protected])

	* libbfd-in.h: Remove alloca cruft.  It was missing some necessary
	cruft (like the #pragma alloca for AIX).
	In addition to that problem, the C alloca calls xmalloc, which
	means checking for being out of memory can't work right.  The
	following changes remove all uses of alloca from BFD.
	* hosts/solaris2.h: Remove alloca cruft.
	* som.c: Replace alloca with a fixed size auto array.
	* aoutx.h, elfcode.h, nlmcode.h, bout.c, coff-alpha.c, ecoff.c,
	ecofflink.c, elf32-hppa.c, elf32-mips.c, linker.c, reloc.c, som.c,
	sunos.c: Replace alloca with malloc and appropriate error checking and
	freeing.
	* linker.c: Replace alloca with obstack_alloc.
	* libbfd.h: Rebuilt.

Tue Mar  8 12:10:38 1994  Ian Lance Taylor  ([email protected])

	* coff-mips.c (mips_relocate_section): Handle MIPS_R_LITERAL like
	MIPS_R_GPREL.

Sat Mar  5 14:08:54 1994  Peter Schauer  ([email protected])

	* elf32-hppa.h, elfcode.h:  Replace uses of Elf*_Half, Elf*_Word,
	Elf*_Off typedefs by their expansion, the typedefs have been
	removed from include/elf/internal.h.
	* elfcode.h (bfd_section_from_shdr):  Handle SHT_DYNAMIC section like
	SHT_PROGBITS section.

Thu Mar  3 20:03:39 1994  Jeffrey A. Law  ([email protected])

	* som.h (_PA_RISC_ID): Treat HOST_HPPAOSF just like HOST_HPPABSD.

Wed Mar  2 13:28:06 1994  Jim Kingdon  ([email protected])

	* configure.host: Recognize i[34]86-sequent-*.

	* trad-core.c (trad_unix_core_file_p): A non-zero, not zero,
	return from bfd_seek indicates an error.
	New macro TRAD_CORE_DSIZE_INCLUDES_TSIZE to replace
	TRAD_CORE_STACK_OFFSET.
	* hosts/symmetry.h: Define TRAD_CORE_DSIZE_INCLUDES_TSIZE and
	TRAD_CORE_USER_OFFSET but not HOST_STACK_OFFSET.

Wed Mar  2 11:57:03 1994  Jeffrey A. Law  ([email protected])

	* som.[ch]: Do not include libhppa.h in som.c, instead include
	it in som.h.

	* elf32-hppa.[ch]: Do not include libhppa.h in elf32-hppa.c, instead
	include it in elf32-hppa.h.

	* som.c (log2): Return -1 on error rather than aborting.
	(setup_sections): Bubble up an error from log2.

	* Changes to make HP C compiler happy in both traditional
	and ANSI mode.
	* som.c (hppa_som_gen_reloc_type): Use correct enum type for
	field parameter.
	(bfd_som_set_section_attributes): Use unsigned int rather than
	unsigned char to avoid GNU-C extensions.
	(bfd_som_attach_aux_hdr): Return a boolean to indicate success
	or failure rather than aborting on failure.

	* som.h (bfd_som_set_section_attributes): Fix prototype to match
	som.c changes.
	(bfd_som_attach_aux_hdr): Add prototype.
	(hppa_som-gen_reloc_type): Likewise.

	* elf32-hppa.c: Add a couple casts to make HP compiler happy.
	(hppa_look_for_stubs_in_section): Do not return false on failure
	until rest of code is ready to handle it.  Abort for now.

Tue Mar  1 18:33:59 1994  Jim Kingdon  ([email protected])

	* bfd-in2.h: Rebuilt.

Tue Mar  1 13:06:53 1994  Kung Hsu  ([email protected])

	* i386os9k.c: use new functions bfd_set_error and bfd_get_error.
	* Makefile.in: delete an extra blank.
	* configure.in : Add i396os9k_vec.

Mon Feb 28 15:41:01 1994  Kung Hsu  ([email protected])

	* config.bfd : Add i386-os9k.
	* config/i386-os9k.mt : Newly add os9k target makefile.

	* i386os9k.c : new file to handle os9k format bfd.
	* Makefile.in : Handle new file i386os9k.c
	* targets.c : Add bfd_target_os9k_flavour and i386os9k_vec.
	* cache.c : Initialize cache_sentinel to 0.

Sun Feb 27 16:30:55 1994  Jeffrey A. Law  ([email protected])

	* elf32-hppa.c (mismatches, retval_mismatches): Fix mismatch
	action in case where caller specified no argument relocation.
	(hppa_elf_build_linker_stub): Try again to get the sym_ptr_ptr
	right in the original relocation and the stub's relocation.

        * elf32-hppa.h (hppa_look_for_stub_in_section): Fix typo.  Delete
	unused symbols argument.

	* elf32-hppa.c (hppa_elf_stub_reloc): Accept asymbol ** rather
	than asymbol * for original target symbol.  All callers changed.
	Set reloc->sym_ptr_ptr appropriately.
	(hppa_elf_build_linker_stub): Set reloc->sym_ptr_ptr correctly.
	(hppa_elf_look_for_stubs_in_section): No longer need symbols
	argument.  Use the output symbols when canonicalizing the relocs,
	creating them if necessary.

	* linker.c (_bfd_generic_link_output_symbols): Do not
	rebuild/clobber the output symbols if they already exist.

Sun Feb 27 15:22:36 1994  Stan Shebs  ([email protected])

	* targets.c (BFD_SEND, BFD_SEND_FMT): Add debugging versions that
	check all the pointer dereferences.  Enabled via DEBUG_BFD_SEND.
	* bfd-in2.h: Rebuilt.

	* srec.c (hex_value): Always set to a size of 256 bytes.
	(srec_init): Cosmetic changes.

Sun Feb 27 11:18:47 1994  Jeffrey A. Law  ([email protected])

	* elf32-hppa.c: Second half of major cleanup.  More comments,
	PARAMize and staticize rest of functions.  Delete unused
	functions.  Delete unused/unnecessary arguments to some functions.
	Group static vars together.  Abort for bad errors until we have
	error code propogation working.  Work on spacing and indention.
	Add FIXMEs for unresolved problems.  Use enums rather than
	#defines for lots of things.  Merge two functions which build
	linker stubs into a single function (so they can easily share a
	ton of common code).

Sat Feb 26 10:00:45 1994  Ian Lance Taylor  ([email protected])

	* reloc.c (_bfd_relocate_contents): Adjust handling of overflow to
	avoid depending upon right shifts of signed numbers, and to
	correct handling of src_mask with lower bits zero.

	* aoutx.h, archive.c: Add casts to avoid warnings from SVR4 cc.
	* ecoff.c, ecofflink.c, ecoffswap.h, srec.c: Likewise.
	* elf32-i386.c: Likewise.
	* elfcode.h (bfd_section_from_shdr): Make i unsigned; remove old
	#if 0 code.
	(elf_write_phdrs): Make i unsigned.
	(map_program_segments): Make i and n_left unsigned.
	(assign_file_positions_except_relocs): Make i unsigned.
	(write_shdrs_and_ehdr): Make count unsigned.
	(assign_file_positions_for_relocs): Make i unsigned.
	(NAME(bfd,elf_write_object_contents)): Make count unsigned.
	(section_from_elf_index): Make index argument unsigned.

Fri Feb 25 21:34:58 1994  Ian Lance Taylor  ([email protected])

	* elfcode.h: Don't include assert.h.
	(swap_out_syms): Use BFD_ASSERT rather than assert.

	* linker.c (_bfd_generic_link_write_global_symbol): Add missing
	break in switch.

	* hosts/i386v4.h (qsort, strtol): Remove incorrect and useless
	declarations.

Fri Feb 25 16:35:57 1994  Jeffrey A. Law  ([email protected])

	* libhppa.h (hppa_rebuild_insn): Moved here from elf32-hppa.c.

	* elf32-hppa.h (elf_hppa_tc_symbol): Add new arguments.
	(elf_hppa_tc_make_sections): Likewise.
	(elf_hppa_final_processing): Add extern decl.

	* elf32-hppa.c: First half of major cleanup.  Add/cleanup lots of
	comments.  PARAMize some static functions.  Delete unused functions.
	Delete unused/unnecessary arguments to many functions.  Group
	static vars together.  Collapse common case statements together
	in many places.  Use default case when possible instead of listing
	each case separately.  Abort for bad errors until we get error
	code propogation working.  Work on spacing and indention problems.
	Add FIXMEs for some unresolved problems.  Delete hopelessly broken 
	COMPLEX relocation support (it's never used anyway).
	(hppa_elf_rebuild_insn): Delete.  Moved into libhppa.h.
	(elf_hppa_tc_symbol): Accept and use new arguments (symext chains).
	(elf_hppa_tc_make_sections): Likewise.

	* format.c (bfd_check_format_matches): Initialize matching_vector
	to keep gcc -Wall quiet.

	* elfcode.h (elf_slurp_reloca_table): Fix typo.

	* som.c (som_get_symtab_upper_bound): Use "sizeof (asymbol *)"
	not "sizeof (som_symbol_type *)".

	* elfcode.h (elf_get_symtab_upper_bound): Use "sizeof (asymbol *)"
	not "sizeof (asymbol").  Opps.

Fri Feb 25 13:19:04 1994  Ted Lemon  ([email protected])

	* bfd.c (bfd_get_gp_size): Can't return gp value on an archive.
	(bfd_set_gp_size):  Can't set gp value on an archive.

Fri Feb 25 12:57:00 1994  Steve Chamberlain  ([email protected])

	* srec.c (pass_over): Don't skip too many characters when
	end of line seen.

Fri Feb 25 11:41:57 1994  Ian Lance Taylor  ([email protected])

	* ecoff.c (ecoff_sizeof_headers): Align result to 16 byte
	boundary.

Thu Feb 24 07:13:22 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_bfd_derive_misc_symbol_info): Derive symbol_info
	field for absolute symbols in the same manner as undefined
	and common symbols.

Thu Feb 24 04:29:19 1994  Peter Schauer  ([email protected])

	* elfcode.h (elf_core_file_p):  Check for core file e_machine match
	like in elf_object_p.

Wed Feb 23 18:28:37 1994  Jeffrey A. Law  ([email protected])

	* elfcode.h (alloca): Delete declaration.

	* som.c (som_prep_headers): Use CPU_PA_RISC1_0 for magic
	number rather than HP9000S800_ID.  Note som.c is careful
	to make sure CPU_PA_RISC1_0 is always defined.

Mon Feb 21 10:12:02 1994  Stan Shebs  ([email protected])

	* Makefile.in (targets.o, archures.o): Use ALL_CFLAGS to supply
	flags to explicit compile actions.

Mon Feb 21 09:50:06 1994  Ian Lance Taylor  ([email protected])

	* ecofflink.c (ecoff_write_symhdr): Set symhdr->magic here.
	* ecoff.c (ecoff_write_object_contents): Make sure .bss section
	ends on a page boundary if there is no symbol table.
	(ecoff_bfd_final_link): Don't set symhdr->magic here.

	* hosts/hp300.h: Include <stdlib.h>; don't declare free.

	* som.c (som_bfd_count_ar_symbols): Use a pointer and alloca
	rather than an array of variable size.
	(som_bfd_fill_in_ar_symbols): Likewise.
	(som_bfd_ar_write_symbol_stuff): Likewise.

	* coff-alpha.c (alpha_relocate_section): Rewrite mask and shift
	operation to avoid OSF 1.3 cc bug.
	* ecoff.c (ecoff_write_object_contents): Make text_size, data_size
	and bss_size bfd_size_type instead of unsigned long.  Make
	text_start and data_start bfd_vma instead of unsigned long.
	* ecofflink.c (ecoff_add_string): Remove incorrect cast of return
	value.

Sun Feb 20 16:06:54 1994  Ian Lance Taylor  ([email protected])

	* linker.c (_bfd_generic_link_add_archive_symbols): Consider
	symbols in the order they appear in the archive map.

Sat Feb 19 03:17:32 1994  Peter Schauer  ([email protected])

	* coff-alpha.c (reloc_nil):  Add forward declaration, add missing
	error_message argument.
	* coff-sparc.c (bfd_coff_generic_reloc):  Add forward declaration,
	add missing error_message argument.
	* mipsbsd.c (mips_fix_hi16_s):  Add forward declaration, add missing
	error_message argument.

Fri Feb 18 11:41:58 1994  Ian Lance Taylor  ([email protected])

 	start-sanitize-powerpc-netware
	Support for PowerPC NetWare.
	* nlm32-powerpc.c: New file.
	* config.bfd (powerpc-*-netware*): New target; use ppc-nlm.
	* config/ppc-nlm.mt: New file.
	* configure.in (nlm32_powerpc_vec): New target vector; use
	nlm32-powerpc.o, nlm32.o, nlm.o.
	* targets.c (nlm32_powerpc_vec): Declare.
	* Makefile.in (BFD32_BACKENDS): Add nlm32-powerpc.o.
	(CFILES): Should add nlm32-powerpc.c, but didn't, because the
	dependencies can't be sanitized.
	end-sanitize-powerpc-netware

	Initial support for PowerPC ELF.  Done without an ABI, and
	probably to be changed when I get an ABI.
	* config.bfd (powerpc-*-sysv4*): New target; use ppc-elf.
	* config/ppc-elf.mt: New file.
	* configure.in (bfd_elf32_powerpc_vec): New target vector; use
	elf32-powerpc.o, elf32.o, elf.o.
	* elf32-powerpc.c: New file.
	* elfcode.h (prep_headers): Add bfd_arch_powerpc case.
	(elf_set_arch_mach): Likewise.
	* targets.c (bfd_elf32_powerpc_vec): Declare.
	* Makefile.in (BFD32_BACKENDS): Add elf32-powerpc.o.
	(CFILES): Add elf32-powerpc.c.
	Rebuilt dependencies.

Thu Feb 17 15:29:55 1994  Ian Lance Taylor  ([email protected])

	* coffgen.c (coff_write_linenumbers): Always return a value.

	* elfcode.h (elf_slurp_symbol_table): Handle zero symbols
	reasonably.  Allocate x_symp using alloca.

	* elfcode.h (map_program_segments): ELF program header entries
	must be sorted by load address.  This used to generate the entries
	in reverse order.

	* section.c (SEC_IN_MEMORY): Define.
	(asection): Rename unused field otheruserdata to contents, and
	make it char *.
	(bfd_make_section_anyway): Initialize contents field to NULL.
	(bfd_get_section_contents): If SEC_IN_MEMORY is set, get section
	contents from contents field rather than from file.
	* bfd-in2.h: Rebuilt.

Thu Feb 17 08:30:53 1994  David J. Mackenzie  ([email protected])

	* bfd.c (bfd_get_error, bfd_set_error): New functions.
	(bfd_error): Make static.
	(bfd_error_type): Renamed from bfd_ec.  Prepend "bfd_error_" to
	all values.
	* bfd-in2.h: Regenerated.
	* aix386-core.c, aout-adobe.c, aout-encap.c, aout-target.h, 
	aoutf1.h, aoutx.h, archive.c, archures.c, 
	bfd.c, bout.c, cache.c, coff-alpha.c, coff-mips.c, 
	coff-rs6000.c, coffcode.h, coffgen.c, core.c, ctor.c, 
	ecoff.c, ecofflink.c, elf.c, elf32-hppa.c, elf32-mips.c, 
	elfcode.h, format.c, hash.c, hp300hpux.c, hppabsd-core.c, 
	i386lynx.c, ieee.c, libbfd.c, libelf.h, linker.c, 
	lynx-core.c, nlm.c, nlm32-alpha.c, nlm32-i386.c, 
	nlm32-sparc.c, nlmcode.h, oasys.c, opncls.c, osf-core.c, 
	ptrace-core.c, reloc16.c, rs6000-core.c, section.c, som.c, 
	srec.c, sunos.c, syms.c, targets.c, tekhex.c, 
	trad-core.c: Change callers.

Tue Feb 15 22:27:27 1994  Jeffrey A. Law  ([email protected])

	* som.c: Remove FIXMEs for things which have been dealt with.

Tue Feb 15 19:39:24 1994  Ken Raeburn  ([email protected])

	* section.c (bfd_get_section_contents): Since this function reads
	unrelocated contents, the section's raw size is always the one to
	use for bounds checking.

	* linker.c (default_indirect_link_order): In assertion, compare
	link_order size field against cooked size, not raw size, of input
	section.

	* bout.c (b_out_get_reloc_upper_bound): For BSS section, just
	return 0.
	(aligncode): When shrinking, the addend should be set to the
	current offset in the section plus the number of bytes of padding
	that will actually be retained.
	(b_out_relax_section): If a section contains no relocations, don't
	bother processing them.
	(b_out_get_relocated_section_contents): Set reloc_done.  Assert
	that bfd_get_section_contents returns true.  Check that relocs are
	properly ordered.
	(b_out_get_relocated_section_contents, case ALIGNDONE): Assert
	that reloc->addend falls between the current source offset and the
	raw size of the input section.

	* config.bfd: Support i960 vxworks versions > 5.0 with coff, not
	bout.  Default with no version number is still bout.  Support
	explicit i960-coff target too.

	* bout.c: Changed some indentation, deleted trailing whitespace,
	fixed some comments, removed some "#if 1" lines.
	(output_addr): New macro.
	(calljx_callback, callj_callback, get_value, abs32code, aligncode,
	b_out_get_relocated_section_contents): Use it for readability.

Tue Feb 15 09:00:16 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_bfd_prep_for_ar_write): Iterate through the SOM
	symbols, not the BFD symbols.
	(som_bfd_ar_write_symbol_stuff): Likewise.

Mon Feb 14 22:55:20 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_slurp_symbol_table): Do not die if a BFD doesn't
	have any symbols.

	* Finish basic read-write support for SOM archive libraries.  Bugs
	surely remain as this hasn't been tested all that much.
	* som.c (SOM_LST_HASH_SIZE, SOM_LST_MODULE_LIMIT): Define.
	(struct som_misc_symbol_info): New structure to hold info necessary
	to build both normal and library symbol tables.
	(som_derive_misc_symbol_info): New function to derive info necessary
	to build both normal and library symbol tables.
	(som_build_and_write_symbol_table): Use new function to derive misc
	symbol information.
	(som_slurp_symbol_table): Update backend private data for symbols
	appropriately.
	(som_bfd_prep_for_ar_write): New function.
	(som_bfd_ar_symbol_hash): New function.
	(som_bfd_ar_write_symbol_stuff): New function.
	(som_write_armap): Flesh out.
	(som_vec): Fix ar padding character.

	* som.c: Consistently use memset rather than bzero.

Mon Feb 14 17:02:28 1994  Stu Grossman  (grossman at cygnus.com)

	* coff-rs6000.c:  Add Lynx core file support, use HOST_AIX, where
	appropriate.
	* rs6000-core.c:  Use HOST_AIX instead of COREFILES_PLEASE.
	* config/rs6000.mh:  Remove defs of ARCHIVES_PLEASE and
	COREFILES_PLEASE.
	* config/rs6000lynx.mh:  Turn on Lynx core file support.
	* hosts/rs6000.h:  #define HOST_AIX.
	* hosts/rs6000lynx.h:  Create this to enable Lynx host support.

Sun Feb 13 14:30:00 1994  Jeffrey A. Law  ([email protected])

	* som.h (som_symbol_data): Safely access backend private data
	for BFD symbols.  All callers changed.

	* Read-only SOM archive support.
	* som.c (som_bfd_count_ar_symbols): New helper function.
	(som_bfd_fill_in_ar_symbols): New helper function.
	(som_slurp_armap): New function to read a SOM LST.

	* som.h: Include <lst.h> and <ar.h>.

Sat Feb 12 22:34:14 1994  Jeffrey A. Law  ([email protected])

	* elfcode.h (elf_map_symbols): Fix typo.
	(write_object_contents): Check return values from prep_headers and
	elf_compute_section_file_positions.
	(set_section_contents): Likewise.

Fri Feb 11 16:56:50 1994  David J. Mackenzie  ([email protected])

	* archive.c (normalize) [VMS]: Call malloc, not bfd_xmalloc.
	(bfd_construct_extended_name_table): Check result of normalize.

Tue Feb  8 08:57:31 1994  David J. Mackenzie  ([email protected])

	Make all callers of malloc or realloc (including via obstacks)
	check the result for NULL.  Most set bfd_error to no_memory and
	return in that case; a few are harder to fix, and are marked
	with "FIXME <return type>".

	* elf32-hppa.c (hppa_elf_build_arg_reloc_stub
	hppa_elf_build_long_branch_stub):  Check bfd_make_empty_symbol return.
	* linker.c (_bfd_generic_link_output_symbols
	_bfd_generic_link_write_global_symbol): Ditto
	* section.c (bfd_make_section_anyway): Ditto.

	* tekhex.c (find_chunk tekhex_mkobject): Check bfd_alloc.
	(first_phase): Ditto.  FIXME void
	(tekhex_make_empty_symbol): Check bfd_zalloc.

	* sunos.c (sunos_read_dynamic_info): Check bfd_zalloc.
	(MY(read_dynamic_symbols) MY(read_dynamic_relocs)): Check bfd_alloc.

	* stringhash.c (_bfd_stringtab_hash_newfunc): Check bfd_hash_allocate.

	* srec.c: Indent.
	(fillup_symbols): Check bfd_alloc.  FIXME void
	(srec_mkobject srec_get_section_contents
	srec_set_section_contents): Check bfd_alloc. 
	(srec_make_empty_symbol): Check bfd_zalloc.

	* som.c (hppa_som_gen_reloc_type): Check bfd_alloc_by_size_t.
	(make_unique_section): Check bfd_alloc.
	(som_new_section_hook): Check bfd_zalloc.
	(bfd_som_attach_aux_hdr): Ditto.  FIXME void

	* rs6000-core.c (rs6000coff_core_p): Check bfd_zalloc.

	* osf-core.c (osf_core_make_empty_symbol): Check bfd_zalloc.
	(osf_core_core_file_p): Check bfd_alloc.

	* oasys.c (oasys_slurp_symbol_table oasys_archive_p
	oasys_mkobject oasys_object_p oasys_new_section_hook
	oasys_set_section_contents): Check bfd_alloc.
	(oasys_slurp_section_data): Check bfd_zalloc and bfd_alloc.
	(oasys_make_empty_symbol): Check bfd_zalloc.

	* nlmcode.h (nlm_make_empty_symbol): Check bfd_zalloc.
	(nlm_slurp_symbol_table): Check bfd_zalloc and bfd_alloc.

	* nlm32-sparc.c (nlm_sparc_read_import): Check bfd_alloc.

	* nlm32-i386.c (nlm_i386_read_import): Check bfd_alloc.

	* nlm32-alpha.c (nlm_alpha_read_import): Check bfd_alloc.

	* linker.c (_bfd_link_hash_newfunc
	(generic_link_hash_newfunc
	(archive_hash_newfunc
	(_bfd_generic_link_add_one_symbol): Check bfd_hash_allocate.
	(_bfd_generic_final_link
	(_bfd_generic_link_output_symbols
	(default_indirect_link_order): Check bfd_alloc.
	(bfd_new_link_order): Check bfd_alloc_by_size_t.

	* irix-core.c (irix_core_make_empty_symbol): Check bfd_zalloc.

	* ieee.c: Indent.
	(read_id get_symbol get_section_entry ieee_archive_p ieee_object_p
	ieee_slurp_section_data ieee_new_section_hook): Check bfd_alloc.
	(do_one): Check bfd_alloc.  Return a boolean.
	(ieee_slurp_section_data): Check it.
	(init_for_output): Check bfd_alloc.  Return a boolean.
	(ieee_set_section_contents): Check it.
	(do_with_relocs):  Check bfd_alloc.  Return a boolean.
	(ieee_bfd_debug_info_accumulate): Ditto.  FIXME void.
	(ieee_mkobject): Check bfd_zalloc.
	(ieee_make_empty_symbol): Check bfd_zmalloc.

	* hpux-core.c (hpux_core_make_empty_symbol): Check
	bfd_zalloc.

	* hppabsd-core.c (hppabsd_core_make_empty_symbol): Check
	bfd_zalloc.
	(hppabsd_core_core_file_p): Check bfd_zalloc.

	* hp300hpux.c (MY(slurp_symbol_table)): Check bfd_alloc.

	* elfcode.h (elf_new_section_hook): Check bfd_alloc.
	(bfd_section_from_phdr): Ditto.
	(write_relocs): Ditto.  FIXME void
	(elf_map_symbols assign_section_numbers map_program_segments):
	Ditto.  Return a boolean. 
	(swap_out_syms): Ditto.  Check elf_map_symbols.
	(elf_slurp_symbol_table): Check bfd_zalloc.
	(elf_slurp_reloca_table): Check bfd_alloc.
	(elf_slurp_reloc_table): Ditto.
	(elf_compute_section_file_positions): Check assign_section_numbers.
	(assign_file_positions_except_relocs): Return a boolean.
	Check map_program_segments.
	(elf_compute_section_file_positions): Check it.

	* elf32-mips.c (mips_elf_final_link): Check bfd_alloc.

	* elf32-hppa.c (hppa_elf_stub_branch_reloc): Check bfd_zmalloc and
	realloc. 
	(hppa_elf_stub_reloc): Ditto.
	(hppa_elf_build_arg_reloc_stub): Check bfd_zalloc.
	(hppa_elf_build_long_branch_stub): Ditto.
	(elf32_hppa_backend_symbol_table_processing): Ditto.

	* ecoff.c (ecoff_set_symbol_info): Check bfd_alloc.  Return a boolean.
	(ecoff_slurp_symbol_table): Check it.
	(ecoff_slurp_armap): Check bfd_alloc.
	(ecoff_write_armap): Check bfd_zalloc.
	(ecoff_link_hash_newfunc): Check bfd_hash_allocate and
	_bfd_link_hash_newfunc. 
	(ecoff_link_add_externals): Check bfd_alloc.

	* ctor.c (bfd_constructor_entry): Check bfd_alloc.

	* coffgen.c (coff_real_object_p): Check bfd_alloc.
	(coff_renumber_symbols): Check bfd_alloc_by_size_t.  Return a boolean.
	(coff_write_symbol): Check bfd_alloc.  FIXME int
	(coff_write_linenumbers): Check bfd_alloc.  Return a boolean.
	(coff_section_symbol): Check bfd_alloc_by_size_t.
	(coff_get_normalized_symtab): Check bfd_alloc.
	(coff_bfd_make_debug_symbol): Check bfd_zalloc.
	* libcoff-in.h: Change decls of coff_renumber_symbols,
	coff_write_linenumbers.
	* libcoff.h: Rebuilt.
	* coffcode.h (coff_write_object_contents): Check
	coff_renumber_symbols, coff_write_linenumbers.

	* coffcode.h: Indent.
	(coff_add_missing_symbols): Check bfd_alloc_by_size_t.  Return a
	boolean. 
	(coff_write_object_contents): Check it.

	* coff-alpha.c (alpha_relocate_section): Check bfd_alloc.
	* coff-mips.c (mips_relocate_section): Ditto.

	* archive.c (bfd_slurp_bsd_armap_f2): Check bfd_alloc value.
	(do_slurp_bsd_armap): Ditto.
	(compute_and_write_armap): Check bfd_realloc value.

	* aoutx.h (translate_from_native_sym_flags): Check bfd_alloc
	return value.  Return boolean value.
	(NAME(aout,make_empty_symbol)): Check bfd_zalloc return value.
	(NAME(aout,slurp_symbol_table)): Check bf_alloc and bfd_zalloc
	return value.
	(add_to_stringtab): Ditto.  FIXME void
	(aout_link_hash_newfunc): Check bfd_hash_allocate return value.
	(aout_link_add_symbols): Check bfd_alloc value.
	(translate_symbol_table): Check translate_from_native_sym_flags.
	* hp300hpux.c (MY(slurp_symbol_table)): Ditto.
	* aoutx.h (aout_link_hash_newfunc): Check _bfd_link_hash_newfunc.

	* opncls.c (bfd_zalloc bfd_realloc): Check result of bfd_alloc.

	* opncls.c (obstack_chunk_alloc): Define as malloc, not
	bfd_xmalloc_by_size_t. 
	(_bfd_new_bfd): Check obstack_begin for 0 return.

	* ieee.c (obstack_chunk_alloc): Define as malloc, not
	bfd_xmalloc_by_size_t. 
	(ieee_archive_p): Check obstack_begin for 0 return and
	obstack_finish for NULL return.

	* hash.c (obstack_chunk_alloc): Define as malloc, not
	bfd_xmalloc_by_size_t. 
	(bfd_hash_table_init_n): Check obstack_begin for 0 return and
	obstack_finish for NULL return.
	(bfd_hash_lookup): Check obstack_alloc for NULL return.

	* ecofflink.c (obstack_chunk_alloc): Define as malloc, not
	bfd_xmalloc_by_size_t. 
	bfd_ecoff_debug_accumulate
	bfd_ecoff_debug_accumulate_other): Check obstack_alloc.
	(add_file_shuffle add_memory_shuffle): Check obstack_alloc for
	NULL return.  Return boolean, not void.
	(bfd_ecoff_debug_init): Check obstack_begin for 0 return.
	(bfd_ecoff_debug_accumulate): Check add_file_shuffle
	and add_memory_shuffle return. 
	(string_hash_newfunc): Check bfd_hash_allocate and bfd_hash_newfunc.
	(bfd_ecoff_debug_accumulate): Check bfd_alloc.
	(ecoff_add_string): Check add_memory_shuffle return.

	* libbfd-in.h (xmalloc, bfd_xmalloc, bfd_xmalloc_by_size_t):
	Remove decls. 
	* libbfd.h: Rebuilt.

Fri Feb 11 15:35:32 1994  Stu Grossman  (grossman at cygnus.com)

	* configure.host:  Add Lynx/rs6000 support.
	* config/i386-nlm.mt:  Enable a.out file support.
	* config/rs6000lynx.mh:  Lynx/rs6000 host support.

Fri Feb 11 17:25:58 1994  Ian Lance Taylor  ([email protected])

	* archive.c (compute_and_write_armap): Rewrite somewhat to improve
	memory usage.

Fri Feb 11 13:10:42 1994  Stan Shebs  ([email protected])

	* archive.c: Change all references to '\n' in archive magic
	to '\012', for greater portability.
	* ecoff.c (ecoff_write_armap): Ditto.

Thu Feb 10 12:58:48 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (aout_link_write_other_symbol): Check strip settings to
	see whether symbol should be output.
	* genlink.h (struct generic_write_global_symbol_info): Added info
	field.
	* linker.c (_bfd_generic_final_link): Initialize wginfo.info.
	(_bfd_generic_link_write_global_symbol): Check strip settings to
	see whether symbol should be output.
	* elf32-mips.c (mips_elf_final_link): Initialize wginfo.info.

Wed Feb  9 21:34:58 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_reloc_queue_find): Do not examine a NULL queue entry.

	* som.c: Cast return values from BFD memory allocation routines to
	avoid warnings from the HP compiler.

Wed Feb  9 12:55:02 1994  Ian Lance Taylor  ([email protected])

	* coff-alpha.c (alpha_relocate_section): Accept a LITERAL
	reloc on an "ldl" instruction too.

	* archive.c (bfd_ar_hdr_from_filesystem): Cast status elements
	when passing them to sprintf.  Use %ld instead of %d.

	* coff-rs6000.c (rs6000coff_mkarchive): Return false.
	(rs6000_coff_snarf_ar_hdr): Don't declare errno; it's not used.
	Also removed unused variable namelen.
	(rs6000coff_write_armap): Declare orl_count and stridx parameters.

Tue Feb  8 18:00:34 1994  Ian Lance Taylor  ([email protected])

	* libbfd-in.h (xmalloc): Don't declare parameter type, to avoid
	conflicts.
	* libbfd.h: Rebuilt.

Tue Feb  8 15:55:50 1994  Ken Raeburn  ([email protected])

	* coff-alpha.c (reloc_nil): New function.
	(alpha_howto_table): Use it as special_function to prevent certain
	relocs from being adjusted by bfd_perform_relocation.  IGNORE
	reloc should be partial_inplace.
	(alpha_ecoff_get_relocated_section_contents): Accept a LITERAL
	reloc on an "ldl" instruction too.

Tue Feb  8 00:32:28 1994  Peter Schauer  ([email protected])

	* elf32-hppa.c (CURRENT_STUB_OFFSET, hppa_elf_build_arg_reloc_stub,
	hppa_elf_build_long_branch_stub):  Cast to char * instead of int
	before performing pointer arithmetic.

Mon Feb  7 20:56:27 1994  Jeffrey A. Law  ([email protected])

	* config.bfd (hppa*-*-osf*): Use bfd_name hppaosf for this
	configuration.
	(hppa*-*-*elf*): This configuration used hppa-elf now.

	* som.c: This file is also used for HOST_HPPAOSF.

	* targets.c (bfd_target_vector): Enable som_vec for HOST_HPPAOSF.

	* hosts/hppaosf.h: New host configuration file.

	* config/hppabsd.mt (SELECT_VECS): Add bfd_elf32_hppa_vec as
	BSD handles both SOM and ELF object files.

	* config/hppaosf.mh (HDEFINES): Delete.  No longer needed.
	(RANLIB): Doesn't do anything, define it to be "echo".

	* config/hppaosf.mt: New target makefile fragment for a PA running
	OSF1.

Mon Feb  7 15:02:06 1994  Ian Lance Taylor  ([email protected])

	* archures.c (enum bfd_architecture): Added bfd_arch_powerpc.
	(archures_init_table): If SELECT_ARCHITECTURES is not defined,
	added bfd_powerpc_arch.
	* bfd-in2.h: Rebuilt.
	* cpu-powerpc.c: New file.
	* Makefile.in (ALL_MACHINES, CFILES): Added cpu-powerpc.c.
	Rebuilt dependencies.

	* elfcode.h (bfd_section_from_shdr): Get vma and alignment_power
	of an SHT_STRTAB section from sh_addr and sh_addralign, rather
	than just setting them to zero.

Sun Feb  6 20:04:10 1994  David J. Mackenzie  ([email protected])

	* elfcode.h (prep_headers, swap_out_syms): Check for NULL return
	from bfd_new_strtab. 
	(elf_compute_section_file_positions): Check for false return from
	swap_out_syms. 

	* linker.c (default_indirect_link_order): Check for NULL return
	from bfd_get_relocated_section_contents.

	* syms.c: Make example application in doc call xmalloc, not
	bfd_xmalloc. 

	* aoutx.h (NAME(aout,slurp_symbol_table),
	aout_link_get_symbols, NAME(aout,link_hash_table_create)):
	* bout.c (b_out_slurp_reloc_table, b_out_squirt_out_relocs):
	* ecoff.c (ecoff_bfd_link_hash_table_create): 
	* ecofflink.c (bfd_ecoff_debug_init): 
	* format.c (bfd_check_format_matches): 
	* linker.c (_bfd_generic_link_hash_table_create): 
	(_bfd_generic_final_link): 
	* reloc16.c (bfd_coff_reloc16_relax_section): 
	(bfd_coff_reloc16_get_relocated_section_contents): 
	* elf32-hppa.c (hppa_elf_build_arg_reloc_stub): 
	* elf32-mips.c (mips_elf_final_link): 
	* elfcode.h (bfd_new_strtab): 
	(bfd_add_2_to_strtab): 
	(elf_slurp_symbol_table): 
	(elf_corefile_note): 
	* libbfd.c (bfd_zmalloc): 
	Use malloc and check the result, instead of bfd_xmalloc.

Sat Feb  5 12:39:28 1994  Jim Kingdon  ([email protected])

	* config.bfd: Put m68*-*-sysv* line after m68*-*-sysv4*.

Sat Feb  5 05:32:44 1994  Peter Schauer  ([email protected])

	* srec.c (srec_write_record):  Put CONST keyword for "src" before
	"unsigned", some compilers don't like it after "unsigned".
	* libcoff.h, libcoff-in.h (bfd_perform_slip):  Rename "value" to
	"val" in prototype declaration because some compilers don't like
	arguments whose names are the same as types.

Sat Feb  5 01:14:38 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (aout_link_check_ar_symbols): Correct test for whether
	object file defines symbol.  Also, if skipping a symbol, skip the
	second symbol of a N_WARNING or N_INDR symbol as well.

Fri Feb  4 23:55:44 1994  Ian Lance Taylor  ([email protected])

	Add basic support for writing RS/6000 XCOFF files.
	* coff-rs6000.c (dummy_reloc): Removed.
	(rs6000coff_howto_table): Defined XCOFF relocs.
	(RTYPE2HOWTO): Defined to use rs6000coff_rtype2howto.
	(rs6000coff_rtype2howto): New function.
	(coff_bfd_reloc_type_lookup): Defined to use
	rs6000coff_reloc_type_lookup. 
	(rs6000coff_reloc_type_lookup): New function.
	(SELECT_RELOC): Defined to set r_type and r_size fields.
	(COFF_LONG_FILENAMES): Defined.
	* coffcode.h (combined_entry_type): Changed fix_tag and fix_end
	fields to bitfields.  Added fields fix_value and fix_scnlen.
	(sec_to_styp_flags): If STYP_DEBUG is defined, use it rather than
	STYP_INFO for the type of a section named .debug.
	(coff_add_missing_symbols): Don't define if RS6000COFF_C.
	(coff_write_object_contents): If RS6000COFF_C, don't call
	coff_add_missing_symbols.
	(coff_slurp_symbol_table): If RS6000COFF_C, then if the last aux
	entry has type STY_LD change the x_scnlen into a pointer to a
	symbol and set fix_scnlen.  Also, for a C_BSTAT symbol, change the
	value into a pointer to a symbol and set fix_value.
	* libcoff.h: Rebuilt.
	* coffgen.c (coff_mangle_symbols): Reindent.  If fix_value is set,
	get the symbol offset. Likewise for fix_scnlen.
	(string_size): Change type to bfd_size_type.
	(debug_string_size, debug_string_section): New static variables.
	(coff_fix_symbol_name): If bfd_coff_symname_in_debug returns true,
	write the symbol name into the .debug section; assume that the
	section has already been created with the right size.
	(coff_write_symbols): Initialize debug_string_size to 0.  If
	bfd_coff_symname_in_debug returns true, don't put symbol name in
	usual string table.  After writing out all symbols, if
	debug_string_size is not 0, check that it matches the size of the
	.debug section.
	(coff_get_normalized_symtab): Clear new fix_value and fix_scnlen
	fields.  If the string offset is 0, always use an empty string as
	the name.
	(coff_make_empty_symbol): Zero out the symbol structure.
	* reloc.c (bfd_perform_relocation): Work around one gross hack
	with another: actually look at the target name to avoid the broken
	COFF check.
	(bfd_reloc_code_real_type): Add BFD_RELOC_PPC_B26,
	BFD_RELOC_PPC_BA26 and BFD_RELOC_PPC_TOC16.
	* bfd-in2.h: Rebuilt.

Fri Feb  4 17:28:32 1994  David J. Mackenzie  ([email protected])

	* libbfd.c (bfd_zmalloc): Call bfd_xmalloc instead of malloc.
	(bfd_xmalloc, bfd_xmalloc_by_size_t): Functions deleted.
	* libbfd-in.h: Define them as macros calling xmalloc and declare
	xmalloc. 
	* libbfd.h: Rebuilt.

Thu Feb  3 16:49:35 1994  Ian Lance Taylor  ([email protected])

	* ecofflink.c (bfd_ecoff_debug_externals): If a small undefined
	symbol has a value in the ECOFF symbol but not in the BFD symbol,
	keep the value in the ECOFF symbol.  This helps gas.

	* linker.c (_bfd_generic_link_output_symbols,
	_bfd_generic_link_write_global_symbol): Don't require that all
	references to a common symbol be themselves common symbols.

	* aoutx.h (aout_reloc_index_to_section): Handle N_UNDF.

Wed Feb  2 20:37:19 1994  Jim Kingdon  ([email protected])

	* libbfd.c, bfd-in.h, hosts/alphaosf.h, hosts/sparc-ll.h, aoutf1.h,
	sparclynx.c, Makefile.in: Change HOST_64_BIT to BFD_HOST_64_BIT.
	* bfd-in2.h: Rebuilt.

Wed Feb  2 12:30:13 1994  Ian Lance Taylor  ([email protected])

	* coffswap.h (coff_swap_reloc_out): If RS6000COFF_C, handle type
	and size correctly.
	(coff_swap_aux_in): If RS6000COFF_C, change x_csect.x_scnlen to
	x_csect.x_scnlen.l to match change in coff/internal.h.
	(coff_swap_aux_out): Likewise.

	* coff-mips.c (mips_ecoff_backend_data), coff-alpha.c
	(alpha_ecoff_backend_data): Change casts of aux_in and aux_out
	fields to match yesterday's changes.

	* coffcode.h (coff_write_relocs): If SELECT_RELOC is defined, pass
	in the internal_reloc itself, not the type.
	* coff-apollo.c, coff-h8300.c, coff-h8500.c, coff-i386.c,
	coff-m68k.c, coff-sh.c, coff-we32k.c, coff-z8k.c: Changed
	definition of SELECT_RELOC accordingly.

Tue Feb  1 12:05:44 1994  Ian Lance Taylor  ([email protected])

	* coffcode.h (bfd_coff_backend_data): Added new arguments to
	_bfd_coff_swap_aux_in and _bfd_coff_swap_aux_out: aux index number
	and number of aux entries.
	(bfd_coff_swap_aux_in, bfd_coff_swap_aux_out): Changed
	accordingly.
	* libcoff.h: Rebuilt.
	* coffswap.h (coff_swap_aux_in, coff_swap_aux_out): Accept new
	arguments.  If RS6000COFF_C, only treat C_EXT and C_HIDEXT
	specially if this is the last aux entry.
	* coffgen.c (coff_write_symbol, coff_get_normalized_symtab): Pass
	new arguments to swap_aux functions.

Sun Jan 30 15:14:36 1994  Ken Raeburn  ([email protected])

	* gen-aout.c (main): Set DEFAULT_ARCH based on preprocessor macros
	(only testing for m68k and vax at the moment); do verify that the
	preprocessor didn't trash the arch name inside the string version.
	Don't print out "pagesize =" line that prevents output from
	compiling.  Derive BYTES_IN_WORD and ARCH values from sizeof
	results.
	* Makefile.in (aout-params.h): Pass gen-aout a dummy target name.
	(check, installcheck): Identify directory in "no testsuites"
	message.

Sun Jan 30 13:25:28 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (aout_link_write_symbols): Write out correct value for
	object file symbol.

Fri Jan 28 18:34:05 1994  Ken Raeburn  ([email protected])

	* hosts/vaxbsd.h (HOST_STACK_END_ADDR): Vax BSD doesn't define
	KERNBASE, so hard-code 0x80000000 instead.

Thu Jan 27 13:54:08 1994  Ian Lance Taylor  ([email protected])

	* linker.c (generic_link_add_symbol_list): If symbol is common,
	set the BSF_OLD_COMMON flag.

Wed Jan 26 13:47:15 1994  David J. Mackenzie  ([email protected])

	* format.c (bfd_check_format_matches): Put the new entry in the
	correct element of matching_vector.

Tue Jan 25 11:43:28 1994  Jim Kingdon  ([email protected])

	* som.c, som.h (bfd_som_set_section_attributes,
	bfd_som_set_subsection_attributes): Change parameters from char
	to int.  Following a prototype with an old-style function definition
	in the presence of widened parameters is a GCC-ism not supported
	by the HP compiler in ANSI mode.

Tue Jan 25 11:46:46 1994  Ian Lance Taylor  ([email protected])

	* reloc.c (bfd_get_reloc_size): Size of type -2 is 4 bytes, not 2.

	* hp300hpux.c (MY(write_object_contents)): Write out the symbols
	before writing out the relocs, so that the right symbol indices
	are used.

	* archive.c (do_slurp_bsd_armap, bfd_slurp_bsd_armap_f2): Do not
	try to overlay the internal carsyms on the external symdefs.  That
	can not work if the size of a host pointer is larger than 4 bytes.

	* format.c (bfd_check_format_matches): Cast result of
	bfd_xmalloc_by_size_t.
	* opncls.c (_bfd_new_bfd): Avoid ANSI C prototype.

	* archive.c: Reindented to GNU standards.

Mon Jan 24 14:41:23 1994  David J. Mackenzie  ([email protected])

	* opncls.c (_bfd_new_bfd, _bfd_new_bfd_contained_in): Add
	"_bfd_" to function names.
	* archive.c (_bfd_create_empty_archive_element_shell),
	libbfd-in.h: Change callers.

	* libbfd.c (bfd_zmalloc): Renamed from zalloc.
	* libbfd.c (bfd_add_to_string_table),
	trad-core.c (trad_unix_core_file_p),
	targets.c (bfd_target_list),
	ptrace-core.c (ptrace_unix_core_file_p),
	opncls.c (new_bfd), libbfd-in.h,
	ieee.c (ieee_make_empty_symbol),
	elf32-hppa.c (hppa_elf_stub_branch_reloc),
	(hppa_elf_stub_reloc): Change callers.
	* libbfd.h: Regenerated.

	* archive.c (_bfd_look_for_bfd_in_cache): Add "_bfd_" to name.
	(_bfd_get_elt_at_filepos), 
	coff-rs6000.c (rs6000coff_get_elt_at_filepos), libbfd-in.h:
	Change callers.

	* format.c (bfd_check_format_matches), libbfd-in.h, targets.c,
	elfcode.h (elf_object_p): Rename target_vector to bfd_target_vector
	and default_vector to bfd_default_vector.
	* libbfd.h: Regenerated.

	* format.c (bfd_check_format_matches): New function.
	(bfd_check_format): Call it.
	(bfd_matching_formats): Function removed.
	* targets.c: Replace the vector added on Jan 21 with a count of
	entries in default_vector.
	* bfd-in2.h: Regenerated.

Mon Jan 24 12:38:54 1994  Ian Lance Taylor  ([email protected])

	* coff-alpha.c (alpha_ecoff_object_p): New function.  Set size of
	.pdata section based on lnnoptr field, not section header.
	(alpha_relocate_section): Don't bother to check if r_symndx >= 0,
	since it is unsigned.
	(ecoffalpha_little_vec): Use alpha_ecoff_object_p rather than
	coff_object_p.
	* ecoff.c (ecoff_new_section_hook): Set alignment_power field of
	.pdata section to 3.
	(ecoff_compute_section_file_positions): Save the size of the
	.pdata section in the line_filepos field, and actually align the
	.pdata section to an alignment power of 4.
	(ecoff_compute_reloc_file_positions): Set output_has_begun after
	calling ecoff_compute_section_file_positions.
	(ecoff_write_object_contents): Set s_lnnoptr for the .pdata
	section from the line_filepos field.  Set vstamp for the optional
	header from the vstamp of the symbolic header.
	(ecoff_bfd_final_link): Set vstamp of the symbolic header to the
	vstamp used by the first object file in the link.

	* ecofflink.c (ecoff_align_debug): Align RFDs to debug_align.

	* linker.c (generic_link_check_achive_element): Set SEC_ALLOC flag
	for a created common section.
	(_bfd_generic_link_add_one_symbol): Likewise.

	* elfcode.h (swap_out_syms): Use elf_section_from_bfd_section to
	get the index of a common section, rather than always using
	SHN_COMMON (MIPS has multiple common sections).

	* elf32-hppa.c (hppa_elf_gen_reloc_type): Typo (== for =).

	* bfd/aoutx.h (aout_link_input_section_std,
	aout_link_input_section_ext): Pass additional arguments to
	reloc_overflow callback.
	* coff-alpha.c (alpha_ecoff_get_relocated_section_contents,
	alpha_relocat_section): Likewise.
	* coff-h8300.c (h8300_reloc16_extra_cases): Likewise.
	* coff-h8500.c (extra_case): Likewise.
	* coff-mips.c (mips_relocate_section): Likewise.
	* coff-z8k.c (extra_case): Likewise.
	* elf32-hppa.c (hppa_elf_stub_finish): Likewise.
	* reloc.c (bfd_generic_get_relocated_section_contents): Likewise.

	* bout.c (calljx_callback, callj_callback): Use get_value to get
	the symbol value and check for undefined symbols.
	(get_value): If the symbol is undefined, look it up in the linker
	hash table.
	(b_out_get_relocated_section_contents): For PCREL24 and PCREL13
	use get_value to get the symbol value and check for undefined
	symbols.
	* reloc16.c (bfd_coff_reloc16_get_value): If the symbol is
	undefined, look it up in the linker hash table.

	* aoutx.h (translate_symbol_table): The string index 0 has a
	special meaning for normal symbols, but not for dynamic symbols.

Sat Jan 22 12:26:01 1994  Stu Grossman  (grossman at cygnus.com)

	* sparclynx.c:  Setup appropriate macros to enable core file
	support.

Fri Jan 21 16:25:35 1994  David J. Mackenzie  ([email protected])

	* targets.c: Add a vector of matching format names.
	* format.c (bfd_matching_formats): New function to return it.
	(bfd_check_format): Set it.
	* bfd-in2.h: Regenerated.

	* bfd-in.h: Remove decls of bfd_ec type and error printing functions.
	Remove decl of type symclass; wasn't used.
	* bfd.c: Document error handling, including code fragments
	containing the error decls that were in bfd-in.h.
	Remove DEFUNs.
	* bfd-in2.h: Regenerated.

Fri Jan 21 14:11:16 1994  Sean Fagan  ([email protected])

	* nlmcode.h, liblnm.h, nlm32-alpha.c nlm32-i386.c nlm32-sparc.c:
	The sparc (and possibly other?) NLM format requires a different
	way to write exports, so add a write_export field to the backend
	data (and set it to NULL for everything but the sparc).

Fri Jan 21 14:11:16 1994  Jim Kingdon  ([email protected])

	* sunos.c (MY(read_dynamic_relocs)): Compare info->dynrel with NULL,
	not (struct external_nlist *) NULL.  info->dynrel is a PTR, not
	a struct external_nlist *.

Fri Jan 21 09:29:01 1994  David J. Mackenzie  ([email protected])

	* bfd.c: Remove error strings for errors removed below.
	* aoutx.h (translate_to_native_sym_flags), bfd-in.h (bfd_ec),
	oasys.c (oasys_write_sections): Rename
	bfd_error_nonrepresentable_section to nonrepresentable_section.
	None of the other bfd error names start with "bfd_error".
	Remove errors symbol_not_found and no_relocation_info, which seem
	to be unused.
	* bfd-in2.h: Regenerated.

Fri Jan 21 01:11:55 1994  Ian Lance Taylor  ([email protected])

	* bfd.c (bfd_get_gp_size): Added support for ELF.

	* syms.c (BSF_DYNAMIC): New symbol flag.
	(bfd_print_symbol_vandf): Print it.
	* bfd-in2.h: Rebuilt.
	* libaout.h (struct aout_backend_data): New read_dynamic_symbols
	and read_dynamic_relocs fields.
	(struct aoutdata): New dynamic_info field.
	(obj_aout_dynamic_info): New accessor macro.
	* sunos.c (struct sunos_dynamic_info): New structure.
	(sunos_read_dynamic_info, MY(read_dynamic_symbols),
	MY(read_dynamic_relocs)): New functions to read dynamic symbols
	and relocs.
	* aoutx.h (NAME(aout,some_aout_object_p)): If the object is
	dynamically linked, set SEC_RELOC for both the .text and .data
	sections.
	(translate_from_native_sym_flags): Don't set BSF_LOCAL for an
	undefined symbol.
	(translate_symbol_table): New function, split out of
	slurp_symbol_table; set the BSF_DYNAMIC flag appropriately.
	(NAME(aout,slurp_symbol_table)): Read dynamic symbols, if any.
	(NAME(aout,slurp_reloc_table)): Read dynamic relocs, if any.
	(NAME(aout,get_reloc_upper_bound)): Include dynamic reloc count in
	return value.
	* aoutf1.h (NAME(aout,sunos4_write_object_contents)): Don't write
	out dynamic symbols or relocs against reloc symbols, since they
	are already in the .text section and we wouldn't know where to
	write them anyhow.
	(sunos4_aout_backend): Initialize read_dynamic_symbols and
	read_dynamic_relocs fields.
	* aout-target.h (MY(backend_data)): Initialize
	read_dynamic_symbols and read_dynamic_relocs fields.

Thu Jan 20 20:57:27 1994  Ken Raeburn  ([email protected])

	* hosts/alphaosf.h (uint64e_type, uint64_type, int64_type): Delete
	typedefs, since HOST_64_BIT will take care of defining them in
	bfd.h.

Wed Jan 19 17:28:59 1994  Ken Raeburn  ([email protected])

	* config/alphaosf.mh (HDEFINES): Don't define HOST_64_BIT here;
	that's dealt with elsewhere.
	* hosts/alphaosf.h (sprintf_vma, fprintf_vma): New macros.
	(uint64_typeHIGH, uint64_typeLOW): Comment with HOST_64_BIT so
	they get copied to bfd.h.

	* reloc.c (enum bfd_reloc_code_real): Add some Alpha relocation
	types.  Reorganized some of the existing ones.
	* coff-alpha.c (alpha_howto_table): Construct 64-bit negative one
	values in case of compilation on a 32-bit machine.  Fix pcrel
	fields of some reloc types.
	(alpha_bfd_reloc_type_lookup): Handle more relocation types.

	* bfd-in.h (uint64_typeHIGH, uint64_typeLOW): Supply default
	definitions when not defined, regardless of whether uint64_type is
	a defined macro or not.
	(fprintf_vma, sprintf_vma): Define only if fprintf_vma is not
	already defined.

Wed Jan 19 00:02:54 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (translate_to_native_sym_flags): Set the type of a
	BSF_WARNING symbol to N_WARNING.

Tue Jan 18 16:43:19 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (aout_link_add_symbols): Increment sym_hash as well as p
	for an indirect or warning symbol.
	(aout_link_write_symbols): Update sym_hash with the target of an
	indirect or warning symbol.  If an indirect symbol is defined,
	output the calculated value and don't output the target symbol.

Tue Jan 18 03:54:59 1994  David J. Mackenzie  ([email protected])

	* aoutx.h (translate_from_native_sym_flags): Give warning symbols
	an (unused) nonzero section value, needed for check below.

Mon Jan 17 15:12:07 1994  David J. Mackenzie  ([email protected])

	* aoutx.h (translate_from_native_sym_flags,
	aout_link_add_symbols): Treat N_SET[ABDT] | N_EXT like
	N_SET[ABDT].

Fri Jan 14 16:45:43 1994  Ian Lance Taylor  ([email protected])

	* elfcode.h (elf_object_p): If there is a SHT_DYNAMIC section, set
	the DYNAMIC flag for the BFD.
	(NAME(bfd_elf,write_object_contents)): Don't try to write out a
	BFD with the DYNAMIC flag set, since we don't generate the program
	header table correctly.

Fri Jan 14 01:04:36 1994  Peter Schauer  ([email protected])

	* elfcode.h (elf_slurp_symbol_table):  Free x_symp at the end
	of the function to avoid storage leak.

Thu Jan 13 23:07:32 1994  Ian Lance Taylor  ([email protected])

	* ecoff.c (ecoff_link_write_external): An ifd can be -1.

Thu Jan 13 12:33:27 1994  Jeffrey A. Law  ([email protected])

	* som.c (som_set_reloc_info): Provide a default symbol for
	relocations which don't actually have an associated symbol.

	* som.c (hppa_som_reloc): Add new "error message" argument.

Wed Jan 12 13:36:43 1994  Peter Schauer  ([email protected])

	Enable gdb to write to core files on more core file readers.
	* libbfd.c (bfd_generic_set_section_contents):  Remove range check
	for section size, it is already done in bfd_set_section_contents
	with bfd_get_section_size_now.
	* aix386-core.c, hppabsd-core.c, hpux-core.c, irix-core.c,
	osf-core.c, ptrace-core.c, trad-core.c (*_set_section_contents):
	Use bfd_generic_set_section_contents instead of bfd_false.

Wed Jan 12 15:31:57 1994  Ian Lance Taylor  ([email protected])

	* linker.c: Added initial documentation.

	* linker.c (default_indirect_link_order): Don't expect space for
	output relocations if there aren't any input relocations.

Tue Jan 11 14:37:12 1994  Ian Lance Taylor  ([email protected])

	* aoutx.h (NAME(aout,final_link)): Set a_entry before computing
	file offsets.

	* elfcode.h (swap_out_syms): A common symbol is STT_OBJECT, not
	STT_NOTYPE.

Tue Jan 11 09:10:56 1994  Jim Kingdon  ([email protected])

	* config.bfd: Use ELF, not COFF for m88*-*-dgux*.
	Combine m88k-*-* and m88110-*-* cases into m88*-*-*.

Tue Jan 11 00:07:19 1994  Ian Lance Taylor  ([email protected])

	* ecofflink.c: Extensive changes to compress and merge debugging
	information, and to write some of out directly rather than saving
	it in memory.  Several new functions and structures, and new
	arguments to existing functions.
	* ecoff.c (ecoff_compute_reloc_file_positions): Compute
	sym_filepos as well.
	(ecoff_get_extr): Use ifdmap instead of ifdbase.
	(ecoff_write_object_contents): Don't compute sym_filepos here.
	Only output symbols if outsymbols is not NULL.
	(ecoff_bfd_final_link): Adjust for changes in ecoff_debug_info and
	bfd_ecoff_debug functions.  Write out debugging information here.
	(ecoff_final_link_debug_accumulate): Adjust for changes in
	bfd_ecoff_debug functions.
	(ecoff_link_write_external): Use ifdmap rather than ifdbase.
	* elf32-mips.c (mips_elf_read_ecoff_info): Read external symbols
	first, to put them in the first memory buffer.  Clear fdr field.
	(mips_elf_get_extr): Use pointer to unswapped external symbol.
	(mips_elf_final_link): Adjust for changes in bfd_ecoff functions.
	Preserve .text, .data and .bss even if they are empty.  Save
	pointer to unswapped external symbol rather than copying it.
	Don't free up the external symbols.
	* libelf.h (elf_symbol_type): Change mips_extr to PTR.
	* bfd-in.h (bfd_ecoff_debug_init, bfd_ecoff_debug_free): Declare.
	(bfd_ecoff_debug_accumulate): Update declaration.
	(bfd_ecoff_debug_accumulate_other): Rename declaration from
	bfd_ecoff_debug_link_other and update.
	(bfd_ecoff_write_accumulated_debug): Declare.
	* bfd-in2.h: Rebuilt.
	* Makefile.in: Rebuilt dependencies.

Mon Jan 10 20:46:53 1994  Jim Kingdon  ([email protected])

	* Makefile.in (install): Remove "@" which follows a backslash.  In
	this position it just causes errors, not suppresses echoes.

Mon Jan 10 09:06:21 1994  Jeffrey A. Law  ([email protected])

	* som.c (hppa_som_gen_reloc_type): Fix handling of LT and RT
	field selectors.

Sun Jan  9 04:32:25 1994  Ken Raeburn  ([email protected])

	* config/i386-netbsd.mt (SELECT_VECS): Include i386bsd_vec.

Fri Jan  7 10:27:27 1994  David J. Mackenzie  ([email protected])

	* aoutx.h (adjust_z_magic): Don't merge the start of bss with the
	end of data if they are not contiguous.

	* aoutf1.h (sunos4_aout_backend): Comment the fields' meanings.

Fri Jan  7 15:40:16 1994  Ian Lance Taylor  ([email protected])

	* ecoff.c (ecoff_mkobject_hook): Don't set SEC_SHARED_LIBRARY flag
	for .reginfo section here.
	(ecoff_new_section_hook): Set it here instead.

Fri Jan  7 10:29:27 1994  Stan Shebs  ([email protected])

    	* bfd-in.h: (bfd_boolean): Add workaround for systems that also
	define true and false as enums.
	(ALMOST_STDC): Add as alternative to __STDC__.
	* bfd-in2.h: Rebuilt.
	* syms.c (bfd_print_symbol_vandf): Convert a PTR to FILE*.

Thu Jan  6 14:24:44 1994  David J. Mackenzie  ([email protected])

	* aoutx.h (translate_to_native_sym_flags): Catch the case where
	there is no output section.

Thu Jan  6 14:37:42 1994  Ian Lance Taylor  ([email protected])

	* nlmcode.h (nlm_object_p): If we can't read the fixed header,
	count it as a wrong format error, not a system call error, since
	the object file might simply be too small.

	* targets.c (target_vector): Added nlm32_alpha_vec inside #ifdef
	BFD64.
	* Makefile.in (BFD32_BACKENDS): Remove nlm32-alpha.o.
	(BFD64_BACKENDS): Add nlm32-alpha.o.  It depends on 64 bit
	support, even though it is for an Alpha in 32 bit mode.
	* configure.in (nlm32_alpha_vec): Set target64 to true.

	* nlm32-gen.c, nlm64-gen.c: Removed.  All nlm targets are
	different, so there is no point to providing a generic one.
	* libnlm.h: Don't bother to check for nlm_backend(bfd) being NULL
	in the backend accessor macros; that should no longer be possible.
	* targets.c (target_vector): Removed nlm32_big_generic_vec,
	nlm64_big_generic_vec, nlm64_little_generic_vec.
	* configure.in (nlm32_big_generic_vec, nlm32_little_generic_vec,
	nlm64_big_generic_vec, nlm64_little_generic_vec): Removed.
	* Makefile.in: Rebuilt dependencies, and
	(BFD32_BACKENDS): Removed nlm32-gen.o.
	(BFD64_BACKENDS): Removed nlm64-gen.o.
	(CFILES): Removed nlm32-gen.c and nlm64-gen.c.

	* hp300hpux.c (ARCH_SIZE): Define before including aoutx.h.

	* linker.c (_bfd_generic_link_add_one_symbol): Add constructor and
	bitsize arguments.  Changed all callers (aoutx.h).
	* libbfd-in.h (_bfd_generic_link_add_one_symbol): Add constructor
	and bitsize arguments to declaration.
	* libbfd.h: Rebuilt.

	* ecoff.c: First cut at new style of linker backend for
	ECOFF--added a bunch of functions.  Also:
	(ecoff_sec_to_styp_flags): Set flags for .pdata and .xdata.
	(ecoff_slurp_symbolic_header): New function.
	(ecoff_slurp_symbolic_info): Call ecoff_slurp_symbolic_header.
	(ecoff_compute_reloc_file_positions): New function.
	(ecoff_set_section_contents): Get out quickly if count is zero.
	Check errors better.
	(ecoff_write_object_contents): Put .xdata section in data segment.
	Call ecoff_compute_reloc_file_positions.  Don't output relocs or
	external symbols if outsymbols is NULL.
	(ecoff_bfd_final_link): Completely rewritten.
	* libecoff.h: Include bfdlink.h.
	(struct ecoff_backend_data): Add relocate_section field.
	(ecoff_data_type): Add sym_hashes and symndx_to_section fields.
	(struct ecoff_link_hash_entry): Define.
	(struct ecoff_link_hash_table): Define.
	(ecoff_bfd_link_add_symbols): Declare as function, not macro.
	(ecoff_bfd_link_hash_table_create): Likewise.
	* ecofflink.c (bfd_ecoff_debug_one_external): New function.
	(bfd_ecoff_debug_externals): Call bfd_ecoff_debug_one_external.
	* bfd-in.h (bfd_ecoff_debug_one_external): Declare.
	* bfd-in2.h: Rebuilt.
	* coff-alpha.c (alpha_howto_table): Mark BRADDR as
	partial_inplace, and set the src_mask to 0x1fffff.
	(alpha_ecoff_get_relocated_section_contents): Remove unused
	variable gp_warned.
	(alpha_convert_external_reloc): New static function.
	(alpha_relocate_section): New static function.
	(alpha_ecoff_backend_data): Initialize relocate_section field.
	* coff-mips.c (mips_relocate_refhi): New static function.
	(mips_relocate_section): New static function.
	(mips_ecoff_backend_data): Initialize relocate_section field.

	* reloc.c (_bfd_relocate_contents): Corrected signed overflow
	checking when there is an addend.

	* aoutx.h (NAME(aout,final_link)): Don't abort when trying to link
	a non a.out file, just pass it to _bfd_default_link_order.
	(aout_link_input_section_std): When doing a final PC relative link
	against a section symbol, subtract the VMA of the input section.
	(aout_link_input_section_ext): Likewise.

	* linker.c (default_indirect_link_order): Renamed from
	_bfd_generic_indirect_link_order and made static.
	(_bfd_generic_final_link): Don't switch on link_order type, just
	call _bfd_default_link_order.
	(_bfd_default_link_order): Handle bfd_indirect_link_order type.
	* genlink.h: Removed declaration of
	_bfd_generic_indirect_link_order.
	* elf32-mips.c (mips_elf_final_link): Don't switch on link_order
	type, just call _bfd_default_link_order.

Tue Jan  4 21:23:37 1994  Ian Lance Taylor  ([email protected])

	* linker.c (generic_link_check_archive_element): Base the name of
	the created common section on the name of the section the symbol
	came from.
	(_bfd_generic_link_add_one_symbol): (case BIG): A common symbol
	must have a section, so don't bother to create one.

Mon Jan  3 15:32:16 1994  David J. Mackenzie  ([email protected])

	* aout-target.h (MY(vec)): Add DYNAMIC to mask of object flags.
	* aoutf1.h (NAME(aout,sunos4_write_object_contents)):
	If the DYNAMIC flag is set, set it in the exec header.
	* aoutx.h (NAME(aout,some_aout_object_p)): If the object is
	dynamically linked, set the DYNAMIC flag in the BFD.
	* libaout.h (N_SET_DYNAMIC): New macro.
	(N_DYNAMIC): Add missing 0 in mask.

Mon Jan  3 11:41:45 1994  Ian Lance Taylor  ([email protected])

	* ecoff.c (ecoff_get_extr): Don't output section symbols as
	external symbols.

	* bfd-in.h, hash.c: Change bfd_hash_allocate argument from size_t
	to unsigned int, because size_t may not be defined in bfd.h.
	* bfd-in2.h: Rebuilt.

	* bfd-in.h (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to
	be a const pointer.
	* bfd-in2.h: Rebuilt.
	* libbfd.c (bfd_get{b,l}[_signed_]{16,32,64}): Declare argument to
	be a const pointer.
	* targets.c (bfd_target): Change swap function pointers
	accordingly.
	* archive.c (do_slurp_coff_armap): Change swap accordingly.
	* aix386-core.c: Change NO_GET and NO_GETS accordingly.
	* hppabsd-core.c, hpux-core.c, irix-core.c, osf-core.c,
	ptrace-core.c, trad-core.c: Change NO_GET and NO_SIGNED_GET
	accordingly.

	* libbfd-in.h (struct artdata): Added tdata field.
	(_bfd_add_bfd_to_archive_cache): Declare.
	(_bfd_get_elt_at_filepos): Declare.
	(_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr.
	* libbfd.h: Rebuilt.
	* archive.c: Cleaned up some more.
	(_bfd_generic_mkarchive, bfd_generic_archive_p): Initialize
	pointer elements of artdata.
	(_bfd_add_bfd_to_archive_cache): Renamed from add_bfd_to_cache.
	(_bfd_snarf_ar_hdr): Renamed from snarf_ar_hdr.
	(_bfd_get_elt_at_filepos): Renamed from get_elt_at_filepos.
	(get_extended_arelt_filename, bfd_construct_extended_name_table,
	bfd_ar_hdr_from_filesystem, compute_and_write_armap): Made static.
	* ecoff.c: Some comment changes.
	(ecoff_slurp_armap): Handle rename of snarf_ar_hdr.  Set
	ardata->tdata to raw_armap.
	(ecoff_archive_p): Initialize pointer elements of artdata.
	* coff-rs6000.c (rs6000coff_get_elt_at_filepos): Handle rename of
	add_bfd_to_cache.

	* hash.c: Added some documentation.

Mon Jan  3 11:09:28 1994  Jim Kingdon  ([email protected])

	* aout-target.h, netbsd386.c: Replace NO_SWAP_MAGIC with SWAP_MAGIC,
	and do the swapping here rather than calling ntohl from the N_*
	macros.  This cleans up assumptions about the size of a host long,
	the existence to ntohl, etc.

Sat Jan  1 13:50:05 1994  Rob Savoye  ([email protected])

	* config.bfd: Add support for VSTa micro-kernel. It currently uses
	i386-aout.

Sat Jan  1 10:18:54 1994  David J. Mackenzie  ([email protected])

	* hosts/i386mach3.h (HOST_SEGMENT_SIZE): Fix value.
	* i386mach3.c (SEGMENT_SIZE): Fix value.

Fri Dec 31 16:23:43 1993  Ian Lance Taylor  ([email protected])

	Minor cleanups suggested by CodeCenter.
	* aoutx.h, coffgen.c, ecoff.c, ecofflink.c, elf.c, libbfd.c,
	linker.c, reloc.c, section.c, srec.c: Added /*ARGSUSED*/ as
	appropriate.
	* aoutx.h (struct external_exec): Removed unnecessary declaration.
	(NAME(aout,some_aout_object_p)): Set some tdata pointers to NULL.
	(adjust_z_magic): Removed useless variable data_vma.
	(stringtab_init): Initialize hash_zero.
	(add_to_stringtab): Removed unused fourth argument.
	(NAME(aout,swap_std_reloc_out)): Removed useless variable
	r_addend.
	(aout_link_input_section): Added some casts.
	* archive.c (get_extended_arelt_filename, do_slurp_coff_armap,
	bfd_ar_hdr_from_filesystem, bsd_write_armap, coff_write_armap):
	Minor code rewriting to make it more C like.
	(do_slurp_bsd_armap): Added some casts.
	* ecoff.c (ecoff_write_object_contents): Removed useless variable
	scn_base.
	(ecoff_write_armap): Added some casts.  Use "" rather than "\0".
	* ecofflink.c (bfd_ecoff_write_debug): Added a cast.
	* libaout.h (struct internal_exec): Removed unnecessary
	declaration.
	* linker.c (_bfd_generic_indirect_link_order): Added a cast.
	* opncls.c (new_bfd): Removed a cast.
	* reloc.c (bfd_generic_get_relocated_section_contents): Added
	some casts.
	* srec.c (internal_srec_write_object_contents): Removed useless
	variable bytes_written.

Fri Dec 31 11:46:13 1993  David J. Mackenzie  ([email protected])

	* i386mach3.c (N_TXTADDR): Don't define after all.
	(TEXT_START_ADDR): Don't include exec header size in value.

Thu Dec 30 15:47:54 1993  David J. Mackenzie  ([email protected])

	* i386mach3.c (N_TXTADDR): Define.

Thu Dec 30 13:37:24 1993  Ian Lance Taylor  ([email protected])

	Extensive changes to move the bulk of the linker into BFD so that
	more efficient backend code can be written for specific object
	files.  Only existing efficient backend is a.out.
	* seclet.c, seclet.h: Removed.
	* hash.c, linker.c, genlink.h: New files.
	* bfd-in.h: Removed bfd_error_vector.  Declared hash table
	structures and functions.
	(JUMP_TABLE): Removed bfd_seclet_link, added
	bfd_link_hash_table_create, bfd_link_add_symbols and
	bfd_final_link.
	* All backends: Changed accordingly.
	* bfd-in2.h: Rebuilt.
	* bfd.c (struct _bfd): Added link_next and archive_pass fields.
	Removed ld_symbols field.
	(bfd_nonrepresentable_section, bfd_undefined_symbol,
	bfd_reloc_value_truncated, bfd_reloc_is_dangerous,
	bfd_error_vector): Removed.
	(bfd_default_error_trap, bfd_error_trap,
	bfd_error_nonrepresentabltrap): Removed.
	(bfd_get_relocated_section_contents): Pass link_info.  Pass
	link_order instead of seclet.  Pass symbols.
	(bfd_relax_section): Pass link_info.
	(bfd_seclet_link): Removed.
	(bfd_link_hash_table_create, bfd_link_add_symbols,
	bfd_final_link): New macros.
	* libbfd-in.h: If __GNUC__ is defined and alloca is not, define
	alloca as __builtin_alloca.  Declare internal linking functions.
	* libbfd.h: Rebuilt.
	* libbfd.c (bfd_seek): Comment out fseek assertion.  It's worked
	for months.
	* reloc.c (reloc_howto_type): Added error_message argument to
	special_function field.  Changed all callers and all definitions.
	(bfd_get_reloc_size): Make argument a const pointer.
	(bfd_perform_relocation): Add error_message argument to hold
	string set if return value if bfd_reloc_dangerous.  Changed all
	callers.
	(_bfd_final_link_relocate, _bfd_relocate_contents): New functions.
	* section.c (asection): Renamed seclets_head and seclets_tail to
	link_order_head and link_order_tail.
	* targets.c (bfd_target): Replaced seclet argument with link_info
	and link_order and symbols arguments in
	bfd_get_relocated_section_contents.  Added symbols argument to
	bfd_relax_section.  Removed bfd_seclet_link.  Added
	bfd_link_hash_table_create, bfd_link_add_symbols and
	bfd_final_link.
	* libaout.h (struct aoutdata): Added external_syms,
	external_sym_count, external_strings, sym_hashes fields.
	(obj_aout_external_syms, obj_aout_external_sym_count,
	obj_aout_external_strings, obj_aout_sym_hashes): New accessor
	macros.
	(WRITE_HEADERS): Only output symbols if outsymbols is not NULL.
	* aoutx.h: Wrote new back end linker routines.
	(translate_to_native_sym_flags): Return boolean value.  Don't use
	bfd_error_vector.
	(NAME(aout,write_syms)): Return boolean value.  Check return value
	of translate_to_native_sym_flags and bfd_write.
	* aout-target.h (final_link_callback): New function.
	(MY_bfd_final_link): New function.
	* aout-adobe.c (aout_adobe_write_object_contents): Check return
	value of aout_32_write_syms.
	* hp300hpux.c (MY(write_object_contents)): Likewise.
	* i386lynx.c (WRITE_HEADERS): Likewise.
	* libaout.h (WRITE_HEADERS): Likewise.
	* bout.c: Changed functions to use link_info->callbacks rather
	than bfd_error_vector, and link_orders rather than seclets.
	* coff-alpha.c: Likewise.
	* coff-h8300.c: Likewise.
	* coff-h8500.c: Likewise.
	* coff-sh.c: Likewise.
	* coff-z8k.c: Likewise.
	* elf32-hppa.c: Likewise.
	* reloc16.c: Likewise.
	* coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Look
	up _gp in the hash table rather than in outsymbols.
	* coff-a29k.c (a29k_reloc): Pass errors back in new error_message
	argument rather than printing them.
	* coffcode.h (bfd_coff_reloc16_extra_cases): Take link_info and
	link_order arguments rather than seclet.  Changed all uses and
	definitions.
	(bfd_coff_reloc16_estimate): Pass link_info arguments.  Changed
	all uses and definitions.
	* libcoff.h: Rebuilt.
	* ecoff.c (ecoff_get_extr): If symbol is defined by linker, but
	not by ECOFF, make it scAbs.
	(ecoff_bfd_final_link): Renamed from ecoff_bfd_seclet_link and
	rewritten.
	* elf32-mips.c (mips_elf_final_link): Renamed from
	mips_elf_seclet_link and rewritten.
	* elf32-hppa.c (elf32_hppa_stub_description): Added link_info
	field.
	(new_stub, add_stub_by_name, hppa_elf_build_arg_reloc_stub,
	hppa_elf_build_long_branch_stub, hppa_look_for_stubs_in_section):
	Added link_info arguments.  Changed all callers.
	* elfcode.h (elf_slurp_symbol_table): Don't quit if outsymbols is
	not NULL.
	* oasys.c (oasys_write_sections): Return boolean value rather than
	using bfd_error_vector.
	(oasys_write_object_contents): Check return value of
	oasys_write_sections.
	* hosts/std-host.h: Don't declare qsort or strtol.
	* Makefile.in: Rebuild dependencies.
	(BFD_LIBS): Removed seclet.o.  Added hash.o and linker.o.
	(CFILES): Removed seclet.c.  Added hash.c and linker.c.
	(HFILES): Removed seclet.h.  Added genlink.h.

Thu Dec 30 07:41:36 1993  Peter Schauer  ([email protected])

	* section.c (bfd_get_section_contents):  Return zero filled buffer
	if section has no contents.

Tue Dec 28 12:43:54 1993  Ian Lance Taylor  ([email protected])

	* elf.c (bfd_elf_generic_reloc): If this is not an inplace reloc,
	then skip bfd_perform_relocation even if the addend is non-zero.

Tue Dec 21 09:22:19 1993  Ken Raeburn  ([email protected])

	* coffcode.h (coff_write_relocs) [SWAP_OUT_RELOC_OFFSET]: Copy
	addend to r_offset field.

	* Makefile.in (CFILES): Added coff-sparc.c.  Rebuild dependencies.

	* coff-sparc.c (SWAP_IN_RELOC_OFFSET, SWAP_OUT_RELOC_OFFSET,
	CALC_ADDEND): Define.

	* aix386-core.c (aix386_core_file_p): Use cd_regs[0] for computing
	the offsetof because AIX /bin/cc does not like to take the address
	of an array.  (From Minh Tran-Le.)

Thu Dec 16 13:06:32 1993  Jeffrey A. Law  ([email protected])

	* Thu Dec 16 15:41:06 1993  Peter Hoogenboom  ([email protected])

	* elf32-hppa.c (hppa_elf_build_arg_reloc_stub): Make sure to copy
	the return pointer into %r2 if no jump-in-call-delay-slot
	optimization was done.

	* hosts/hp300bsd.h: Correctly identify 4.3BSD vs 4.4BSD.

Wed Dec 15 08:04:16 1993  David J. Mackenzie  ([email protected])

	* hosts/std-host.h: (time): Don't declare; conflicts on Mach3.

	* hosts/i386mach3.h (HOST_PAGE_SIZE): Set to 1 to avoid padding.
	(HOST_SEGMENT_SIZE): Set to 0 for same reason.

	* i386mach3.c (PAGE_SIZE, SEGMENT_SIZE): Same changes as above.
	(TEXT_START_ADDR): Correct.
	(MY_backend_data): Define.

	* aoutx.h (adjust_o_magic, adjust_z_magic, adjust_n_magic):
	New functions; code moved from aout_<size>_adjust_sizes_and_vmas.

Tue Dec 14 21:48:33 1993  Jeffrey A. Law  ([email protected])

        * som.c (som_begin_writing): Fix thinkos in auxiliary header
	support.
	(bfd_som_attach_aux_hdr): Likewise.

Mon Dec 13 23:34:48 1993  Jeffrey A. Law  ([email protected])

	* elf32-hppa.c (hppa_elf_gen_reloc_type): Handle 'T' field
	selectors for PIC code.

	* som.c (hppa_som_gen_reloc_type): Handle 'T' field selectors.
	(som_write_fixups): Handle R_DLT_REL, R_FSEL, R_RSEL, R_LSEL
	relocations needed by PIC.

Tue Dec  7 15:47:51 1993  Stu Grossman  (grossman at cygnus.com)

	* nlmcode.h:  Fixes to avoid compiler warnings...

Tue Dec  7 15:10:54 1993  Ian Lance Taylor  ([email protected])

	* libnlm.h (nlm_backend_data): Removed macro definition.
	(nlm_alpha_backend_data): Adjusted accordingly.

Sun Dec  5 19:32:08 1993  Jeffrey A. Law  ([email protected])

	* som.c (som_begin_writing): Flesh out code for handling simple
	auxiliary headers.
	(bfd_som_attach_aux_hdr): New function.

	* som.h (struct somdata): Add fields for attaching version and
	copyright headers.  Add accessor macros.

	* som.c (R_DLT_REL, R_AUX_UNWIND, R_SEC_STMT): Add protected
	definitions for old versions of HPUX which fail to define them.
	(som_hppa_howto_talbe): Add R_DLT_REL, R_AUX_UNWIND, and R_SEC_STMT
	now that they're safe.  Delete bogus R_STATEMENT relocations.

	* som.c (som_hppa_howto_table): Add missing R_END_TRY.  Delete 
	extra R_DATA_OVERRIDE.
	(hppa_som_gen_reloc_type): Generate a relocation for the rounding
	mode selector if needed.
	(som_write_fixups): Handle requests for a change in the default
	rounding mode.  Rounding modes do not consume input bytes, but
	are just markers much like R_ENTRY and R_EXIT.

Sat Dec  4 19:40:32 1993  Jeffrey A. Law  ([email protected])

	Fri Dec  3 09:55:17 1993  Pete Hoogenboom  ([email protected])

	* elf32-hppa.c: (hppa_elf_reloc):  Do not do code reordering when
	the branch instruction as originally been nullified.
	hppa_elf_reloc):  Avoid useless call to bfd_put_32 () in the
	case of no code reordering due to an LDO instruction in the
	delay slot of the branch.  Make sure to relocate the correct
	instruction.  Do not perform instruction reordering for millicode
	calls.
	(hppa_elf_build_arg_reloc_stub):  Change the relocation type
	to R_HPPA_STUB_CALL_17 when special processing might be needed.
	(hppa_elf_build_long_branch_stub): Prevent code reordering on
	a call from a linker stub to another linker stub and for millicode
	calls.  Do not trash the return register for calls from one linker
	stub to a second linker stub.

	* elf32-hppa.c: (elf_hppa_howto_table):  PLABEL and DLT
	relocations are not pc-relative.

	* hppa_stubs.h: (BLE_N_XXX_0_31):  New instruction used in
	linker stub code. 
	(COPY_2_31):  Likewise.

Fri Dec  3 18:40:58 1993  Ian Lance Taylor  ([email protected])

	* config/solaris2.mh (HDEFINES): Remove -Dconst=
	* hosts/solaris.h: If not __GNUC__, define const as empty.

Thu Dec  2 15:43:32 1993  Ian Lance Taylor  ([email protected])

	* ecoff.c: Added various casts for 32/64 bit cross targeting.
	(ecoff_mkobject_hook): Set SEC_SHARED_LIBRARY for the .reginfo
	section so that the linker ignores it.
	* ecofflink.c: Added various casts for 32/64 bit cross targeting.
	(ecoff_add_bytes): Changed need argument to size_t.
	(bfd_ecoff_debug_link_other): Check return value of
	ecoff_add_string.

	* libbfd-in.h (new_bfd): Use void rather than an empty parameter
	list.
	* libbfd.h: Rebuilt.

	* libnlm.h (struct nlm_obj_tdata): New field backend_data.
	(nlm_backend_data, nlm_alpha_backend_data): New accessor macros.
	(struct nlm_backend_data): New field no_uninitialized_data.
	(nlm_no_uninitialized_data): New accessor macro.
	* nlmcode.h (nlm_compute_section_file_positions): Handle
	no_uninitialized_data.
	(nlm_external_reloc_compare): Sort relocs by address for a
	particular symbol, to make the sort more stable.
	(nlm_write_object_contents): Cast the arguments to qsort.  Get the
	value of a debugging symbol the same way we get the value of a
	normal symbol.
	* nlm32-alpha.c: Various changes.  Write out GP and .lita relocs.
	Set no_uninitialized_data to true.
	* nlm32-i386.c (nlm32_i386_backend), nlm32-sparc.c
	(nlm32_sparc_backend): Set no_uninitialized_data field false.
	* nlmswap.h (nlm_swap_fixed_header_out): Zero out destination
	before filling it in.

Wed Dec  1 21:47:58 1993  Jeffrey A. Law  ([email protected])

	* som.c (som_section_type, som_decode_symcalss): New functions.
	(som_get_symbol_info): Use them.
	(som_slurp_symbol_table): Set the section of common and undefined
	symbols correctly.

Wed Dec  1 14:15:10 1993  Ken Raeburn  ([email protected])

	* elfcode.h (write_relocs): Initialize local var LAST_SYM_IDX, to
	make gcc happy.

	* mipsbsd.c: Changes from Ralph Campbell:
	(mips_howto_table_ext): MIPS_RELOC_LO16 should use
	complain_overflow_dont.
	(aout_mips_*_vec): Make name use "a.out" instead of "aout", to
	make gdb happy.

	* bfd.c (bfd_errmsgs): Reword invalid-target message.

	* config.bfd: For sparc*-*-coff, use sparc-coff.
	* configure.in: Handle sparccoff_vec.
	* targets.c (sparccoff_vec): Declare.

	* reloc.c (bfd_get_reloc_size): New function.
	(struct reloc_howto_type): Update documentation of size field.

Wed Dec  1 14:39:05 1993  Ian Lance Taylor  ([email protected])

	* nlm32-alpha.c: New file; preliminary Alpha NetWare support.
	* config.bfd (alpha-*-netware*): New target; use alpha-nlm.
	* config/alpha-nlm.mt: New file.
	* configure.in (nlm32_alpha_vec): New vector; use nlm32-alpha.o,
	nlm32.o, and nlm.o.
	* Makefile.in (BFD32_BACKENDS): Added nlm32-alpha.o.
	(CFILES): Added nlm32-alpha.c.
	Rebuilt dependencies.
	* targets.c (nlm32_alpha_vec): Declare.

	* libnlm.h (struct nlm_backend_data): New fields
	optional_prefix_size, nlm_backend_object_p, nlm_write_prefix,
	nlm_set_public_section, nlm_get_public_offset.  Removed unused
	nlm_write_reloc field.  Changed nlm_write_import to remove
	unnecessary symbol argument.  Renamed nlm_write_externals to
	nlm_write_external, and changed cound argument from bfd_vma to
	bfd_size_type.
	(nlm_optional_prefix_size, nlm_backend_object_p_func,
	nlm_write_prefix_func, nlm_set_public_section_func,
	nlm_get_public_offset_func): New accessor macros.
	(nlm_write_reloc_func): Removed.
	(nlm_write_external_func): Adjusted for field renaming.
	* nlm32-i386.c (nlm_i386_write_import): Renamed from
	nlm_i386_write_reloc.  Removed old nlm_i386_write_import which
	just called old nlm_i386_write_reloc.
	(nlm_i386_write_external): Renamed from nlm_i386_write_externals.
	Declared.  Changed second argument from bfd_vma to bfd_size_type.
	(nlm32_i386_backend): Adjusted for changes to fields and names.
	* nlm32-sparc.c (nlm_sparc_mangle_relocs): Removed unused,
	ifdeffed out code.
	(nlm_sparc_write_import): Removed second argument.
	(nlm_sparc_write_external): Renamed from
	nlm_sparc_write_externals.  Changed second argument from bfd_vma
	to bfd_size_type.
	(nlm32_sparc_backend): Adjusted for changes to fields and names.
	* nlmcode.h: Removed some unused code.
	(nlm_object_p): Don't destroy tdata pointer.  Call
	backend_object_p function if it exists.
	(nlm_slurp_symbol_table): Removed unused variable rcount.  Call
	set_public_section_func if it exists instead of checking
	NLM_HIBIT.
	(nlm_compute_section_file_positions): Account for
	optional_prefix_size.
	(nlm_write_object_contents): Account for optional_prefix_size.
	Removed useless variable write_reloc_func.  Changed declaration
	and call of write_import_func.  Call write_prefix_func if it
	exists.  Removed unused variables len and temp.  Call
	get_public_offset_func if it exists rather than setting NLM_HIBIT.
	* nlmswap.h: Declare functions.

	* bfd-in.h (uint64_typeLOW, uint64_typeHIGH): Fully parenthesize
	for clarity.
	(fprintf_vma, sprintf_vma): Use %lx, not %x.
	* bfd-in2.h: Rebuilt.
	* hosts/alphaosf.h (uint64_typeLOW, uint64_typeHIGH): Cast results
	to unsigned long.

	* config.bfd: Don't set target64 here, as the setting is ignored.
	* configure.in (ecoffalpha_little_vec): Set target64.

	* config/alphaosf.mt (TDEFINES): Removed; setting host parameters
	in TDEFINES is wrong.

	* coff-alpha.c (alpha_ecoff_get_relocated_section_contents):
	Remove unused variable output_section.

Tue Nov 30 16:45:23 1993  Ian Lance Taylor  ([email protected])

	* irix-core.c: New file for Irix 4 and Irix 5 core support.
	Functions taken out of coff-mips.c.  Handle vmap type VMAPFILE.
	* coff-mips.c: Irix 4 core file support moved to irix-core.c.
	* targets.c: If IRIX_CORE defined, include irix_core_vec in
	target_vector.
	* config/irix4.mh (HDEFINES): Add -DIRIX_CORE.
	(HDEPFILES): Define to be irix-core.o.
	* config/irix5.mh (HDEFINES): Define to be -DIRIX_CORE.
	(HDEPFILES): Define to be irix-core.o.
	* Makefile.in (OPTIONAL_BACKENDS): Added irix-core.o.  Removed
	sco-core.o, which no longer exists.
	(CFILES): Added all *-core.c files.
	Rebuilt dependencies.

Wed Nov 24 02:02:41 1993  Ian Lance Taylor  ([email protected])

	* elfcode.h (map_program_segments): Restore check of file_size !=
	mem_size, but only if SHT_PROGBITS.

	* ecofflink.c: New file to hold ECOFF debug information linking
	routines.
	* ecoff.c (ecoff_clear_output_flags, ecoff_rel, ecoff_dump_seclet,
	ecoff_add_string, ecoff_get_debug): Removed.  Functionality now in
	ecofflink.c.
	(ecoff_get_extr, ecoff_set_index): New functions.
	(ecoff_slurp_symbolic_info): Don't save raw_size.
	(ecoff_bfd_seclet_link): Rewrote to use ecofflink.c functions.
	(ecoff_compute_section_file_positions): Don't set EXEC_P just
	because there is a start address.
	(ecoff_write_object_contents): Handle external symbols here.  Use
	ecofflink.c functions to write out debugging information.
	* elf32-mips.c (mips_elf_read_ecoff_info, mips_elf_get_extr,
	mips_elf_set_index): New functions.
	(mips_elf_seclet_link): Discard empty sections, the .options
	section and .gptab sections.  Handle linking .mdebug section.
	* libecoff.h (ecoff_data_type): Removed raw_size and ifdbase.
	* libelf.h (elf_symbol_type): Added mips_extr to tc_data union.
	* bfd-in.h: Added prototypes for routines in ecofflink.c (some are
	called by gas, so they are public).
	* bfd-in2.h: Rebuilt.
	* Makefile.in (BFD_LIBS): Added ecofflink.o.
	(CFILES): Added ecofflink.c.
	(ecofflink.o): New target.  Rebuilt dependencies.

Mon Nov 22 22:26:42 1993  Jeffrey A. Law  ([email protected])

	* som.c (hppa_object_p): Also recognize SHARED_MAGIC_CNX as
	a valid magic number if it's been defined.

Mon Nov 22 14:17:36 1993  Ian Lance Taylor  ([email protected])

	* ecoff.c (ecoff_mkobject): Don't create .scommon section; linker
	no longer requires it.
	(ecoff_bfd_seclet_link, ecoff_sizeof_headers,
	ecoff_write_object_contents): Don't treat .scommon section
	specially.

Mon Nov 22 10:54:27 1993  Fred Fish  ([email protected])

	Merged changes from [email protected] (Kevin A. Buettner):
	* bfd/config/delta88.mh (HDEFINES): Define this to be -DPTRACE_CORE.
	* bfd/config/delta88.mh (HDEPFILES): Defined to be ptrace-core.o.
	* bfd/ptrace-core.c:  New file for dealing with core files with
	start with the ptrace_user structure found on BCS compliant systems.
	* bfd/targets.c (ptrace_core_vec):  New vector.

Mon Nov 22 02:33:12 1993  Jeffrey A. Law  ([email protected])

	* Minimal support for reading SOM fixup streams.  Allows
	objdump -r to do something reasonable.
	* som.c (som_get_reloc_upper_bound): Implement.
	(som_canonicalize_reloc): Implement.
	(som_set_reloc_info, som_slurp_reloc_table): New functions.

Sun Nov 21 13:46:55 1993  Ken Raeburn  ([email protected])

	* hosts/lynx.h (FPRINTF_ALREADY_DECLARED): Define.
	* hosts/sparclynx.h: Include lynx.h instead of duplicating it.

Fri Nov 19 14:34:04 1993  Ian Lance Taylor  ([email protected])

	* coff-a29k.c (a29k_reloc): For R_IREL, don't left shift
	signed_value before sign extending it.  Don't subtract out
	reloc_entry->address.  This makes it compatible with what gas is
	generating.

	* elfcode.h (elf_fake_sections): Accept .sbss as the name for a
	SHT_NOBITS sections.
	(map_program_segments): Don't leave the loop after the first
	SHT_NOBITS section.
	(assign_file_positions_except_relocs): Only force sh_offset and
	sh_addr to match modulo maxpagesize for a section which is not
	SHT_NOBITS.  Changed the method used to force page alignment after
	a SHT_NOBITS section to only do it for the last such consecutive
	section, and to really force page alignment.

Fri Nov 19 04:02:01 1993  Ken Raeburn  ([email protected])

	* coffcode.h (coff_slurp_symbol_table): Print more verbose message
	in the case of an unknown (or unhandled) storage class.

	* config/i386-lynx.mt (TDEFINES): FPRINTF_ALREADY_DECLARED should
	not be defined here, since it is a host attribute, not a target
	one.
	* config/m68k-lynx.mt, config/sparc-lynx.mt: Ditto.

	* coffcode.h (coff_bfd_reloc_type_lookup): Don't define if already
	defined.

	* coff-sparc.c: Define some relocations, based on ELF relocations.
	(enum reloc_type, bfd_coff_generic_reloc, coff_sparc_howto_table,
	struct coff_reloc_map, sparc_reloc_map,
	coff_sparc_reloc_type_lookup): Borrowed from elf32-sparc.c and
	elf.c, renamed.
	(coff_bfd_reloc_type_lookup): Define to be coff_sparc_reloc_....
	(rtype2howto): Index into coff_sparc_howto_table using
	dst->r_type.

Thu Nov 18 11:45:39 1993  Ian Lance Taylor  ([email protected])

	* config.bfd (mips*-*-irix5*): New target; use mipsbelf.
	* configure.host (mips-sgi-irix5*) New host; use irix5 (no
	hosts/irix5.h created; just use std-host.h).
	* config/irix5.mh: New file; like irix4.mh, but don't use -G or
	-lmalloc.
	* Makefile.in: Rebuilt dependencies.

	* ecoffswap.h: Changed type of internal pointers for swap out
	functions to const *.

	* elf32-mips.c (mips_elf_got16_reloc): New function.  Handle GOT16
	correctly for assembler, but linker support not implemented.
	(elf_mips_howto_table): Use mips_elf_got16_reloc for GOT16.
	(mips_elf_sym_is_global): New function; at least on Irix 5, all
	non section symbols are considered global.
	(elf_backend_sym_is_global): Define.
	(mips_elf_final_write_processing): New function.  Set the MIPS
	architecture level correctly.
	(elf_backend_final_write_processing): Define.
	(mips_elf_section_from_shdr): Handle SHT_MIPS_OPTIONS.
	(mips_elf_fake_sections): Set entsize of .mdebug or .reginfo
	section to 1.  Handle .options section.
	(mips_elf_acom_section, mips_elf_acom_symbol,
	mips_elf_acom_symbol_ptr): New static variables, used to build a
	generic .acommon section to hold SHN_MIPS_ACOMMON symbols.
	(mips_elf_symbol_processing): Handle SHN_MIPS_ACOMMON symbols by
	putting them all in a global .acommon section.

	* elfcode.h (bfd_section_from_shdr): Don't dump core if target
	section has no ELF section data.
	(elf_make_sections): Set addralign of reloc section to 4.
	(elf_fake_sections): Likewise.
	(map_program_segments):	Don't consider section 0.
	(assign_file_positions_except_relocs): Don't consider section 0.
	In the main loop, skip the symtab and strtab sections, since their
	positions are set elsewhere.
	(swap_out_syms): Set addralign of symtab section to 4.  Set
	addralign of strtab sections to 1.
	(assign_file_positions_for_relocs): Don't consider section 0.
	(write_object_contents): Don't write out section 0.

	* libelf.h (struct elf_backend_data): Added fields
	elf_backend_sym_is_global and elf_backend_final_write_processing.
	* elf32-target.h (elf32_bed): Added corresponding initializers.
	* elf64-target.h (elf64_bed): Likewise.
	* elfcode.h (sym_is_global): Take abfd argument.  Call
	elf_backend_sym_is_global if it is not NULL.
	(elf_map_symbols): Pass abfd to sym_is_global.
	(write_object_contents): Call elf_backend_final_write_processing
	if it is defined.

Wed Nov 17 18:43:28 1993  Ian Lance Taylor  ([email protected])

	* libecoff.h: Include coff/ecoff.h.
	(struct ecoff_backend_data): Move external debugging information
	fields into a single field pointing to an ecoff_debug_swap
	structure.
	(ecoff_data_type): Move debugging information fields into a single
	field pointing to an ecoff_debug_info structure.
	* coff-alpha.c, coff-mips.c, ecoff.c: Corresponding changes.

Wed Nov 17 17:38:58 1993  Sean Eric Fagan  ([email protected])

	* nlmswap.h: New file to swap fixed header.  Included by NLM
	backends.
	* libnlm.h (struct reloc_and_sec): Define.
	(struct nlm_backend_data): Add fields fixed_header_size,
	nlm_read_import, nlm_write_import, nlm_swap_fhdr_in,
	nlm_swap_fhdr_out.
	(nlm_fixed_header_size, nlm_read_import_func,
	nlm_write_import_func, nlm_swap_fixed_header_in_func,
	nlm_swap_fixed_header_out_func, nlm_write_external_func): New
	accessor macros.
	* nlmcode.h: Use new functions.
	* nlm32-i386.c: Provide new functions.
	* nlm32-sparc.c: New file; SPARC NLM backend.

Wed Nov 17 13:56:10 1993  Stan Shebs  ([email protected])

	* i386lynx.c (swap_std_reloc_in, swap_ext_reloc_in): Ignore
	garbage bits appearing in the upper end of symbolnums.

	* config/sparc-lynx.mt (TDEFINES): Add -DFPRINTF_ALREADY_DECLARED.

Tue Nov 16 17:03:41 1993  Stu Grossman  (grossman at cygnus.com)

	* lynx-core.c (lynx_core_file_p):  Change bfd_zalloc to bfd_alloc.
	* m68klynx.c:  Define core file macros.
	* hosts/i386lynx.h, hosts/m68klynx.h, hosts/lynx.h:  Move all
	non-architecture specific stuff into lynx.h.

Tue Nov 16 15:45:54 1993  Jim Kingdon  ([email protected])

	* i386linux.c: Define new macro ZMAGIC_DISK_BLOCK_SIZE to 1024, and
	change PAGE_SIZE to 4096.

Mon Nov 15 11:48:08 1993  Ken Raeburn  ([email protected])

	* Makefile.in (diststuff): New target.

	* VERSION: Updated.

Sun Nov 14 23:33:01 1993  Jeffrey A. Law  ([email protected])

	* som.c (som_object_setup): Do not create dummy ".text", ".data",
	and ".bss" sections.
	(setup_sections): Do not set SEC_HAS_CONTENTS if a section's size
	is zero.  Recognize BSS type sections and turn off SEC_LOAD and
	SEC_DATA (so binutils/size works).  Set the correct value for
	a section's _raw_size.
	(som_slurp_symbol_table): Program entry points, and millicode are
	also functions.  Mark them as such.  Also mark L$* symbols as
	debugging symbols.

	* bfd-in2.h: Rebuilt.

Sat Nov 13 15:27:15 1993  Jeffrey A. Law  ([email protected])

	* som.c (som_bfd_reloc_type_lookup): Add missing prototype.  Returns
	a pointer to constant data.  Delete bogus #define which made the 
	function useless.

	* som.c (som_prep_for_fixups): New function.
	(som_write_fixups): New function.
	(som_write_space_strings): New function.
	(som_write_symbol_strings): New function.
	(som_begin_writing): New function.

Fri Nov 12 15:29:36 1993  Jeffrey A. Law  ([email protected])

	* som.c (som_write_object_contents): Do not abort.  Flesh out.
	(som_set_section_contents): Do not abort.  Flesh out.

	* som.c (som_write_headers): New function.
	(som_prep_headers): New function.
	(som_build_and_write_symbol_table): New function.

	* som.c (som_sizeof_headers): Add missing prototype.
	(som_set_arch_mach): Do not abort.

	* som.c (som_count_spaces): New function.
	(som_count_subspaces): New function.
	(compare_syms): New function.
	(som_compute_checksum): New function.

	* som.c (hppa_som_gen_reloc_type): New function.
	(som_bfd_reloc_type_lookup): New function.

	* som.c (try_prev_fixup): New function.
	(som_reloc_skip): New function.
	(som_reloc_addend): New function.
	(som_reloc_call): New function.

	* som.c (som_initialize_reloc_queue): New function.
	(som_reloc_queue_insert): Likewise.
	(som_reloc_queue_fix): Likewise.
	(som_reloc_queue_find): Likewise.

	* som.c (som_hppa_howto_table): SOM howto relocation table.
	(hppa_som_reloc): New function.

	* som.c (struct reloc_queue): New structure to keep track of
	the last four multibyte relocations emitted.
	(enum pa_symbol_type): Type to fully describe the symbol types
	associated with .import/.export assembler directives.

	* som.c: Include libhppa.h

	* som.c (bfd_som_set_section_attributes): New function.
	(bfd_som_set_subsection_attributes): Likewise.
	(bfd_som_set_symboL_type): Likewise.
	(bfd_som_attach_unwind_info): Likewise.
	* som.h: Declare new exported functions.

	* som.h (struct som_symbol): Add new fields to hold additional
	information needed to build/write symbol tables and fixup streams.
	(struct som_section_data_struct): Add new fields to hold additional
	information needed to build/write space and subspace headers.
	(som_symbol_data): New accessor macro for SOM symbol information.
	(R_HPPA_*): Basic relocation types to be used by the assembler.

Fri Nov 12 11:00:28 1993  Jim Kingdon  ([email protected])

	* trad-core.c (trad_unix_core_file_p): If new hook
	TRAD_CORE_ALLOW_ANY_EXTRA_SIZE defined, then skip the check for the
	corefile being too big.
	* hosts/i386sco.h: Define it.

Thu Nov 11 15:16:28 1993  Jeffrey A. Law  ([email protected])

	* bfd.c (struct _bfd): Add hppabsd_core_data.
	* targets.c (target_vector): Add hppabsd_core_vec.
	* hpux-core.c (hpux_core_core_file_p): Fail if an unknown core
	section is encountered during core section scanning.
	* hppabsd-core.c: New file.
	* config/hppabsd.mh: Enable HPPA BSD core files.

	* elf32-hppa.c (hppa_elf_reloc): Remove DEFUN crud.  Remove code
	which is either commented out or ifdef'd out.  Add, update and
	clean comments.  Fix various indention and spacing problems.  Handle
	problems related to using "ble" to jump to a stub rather than "bl"
	(%r31 is trashed by "ble", but not by "bl").
	(NEW_INSTRUCTION): Put inside curly braces.
	(CURRENT_STUB_OFFSET): Fix indention problems.
	(hppa_elf_build_arg_reloc_stub): Fix indention and spacing problems.
	Add, update and clean comments.  Handle "ble" %r31 lossage problems.
	(hppa_elf_build_long_branch_stub): Likewise.
	(hppa_look_for_stubs_in_section): Likewise.
	(hppa_elf_stub_check): Remove obsolete function.

	* hppa_stubs.h: Add new instructions to deal with %r31 lossage
	problems.  Delete unused instructions.
	
Tue Nov  9 11:40:27 1993  Stan Shebs  ([email protected])

	* m68klynx.c (TARGET_IS_BIG_ENDIAN_P): Define.

Tue Nov  9 11:26:05 1993  Ian Lance Taylor  ([email protected])

	* elfcode.h (elf_object_p): Rather than looking through an array
	of architectures, get the ELF EM_xxx code from the backend
	information.  Let the generic ELF target match any EM_xxx code not
	matched by another ELF target.  Call elf_backend_object_p to let
	the backend do more checks and set global information.
	* libelf.h (struct elf_backend_data): Added elf_machine_code and
	elf_backend_object_p fields.
	(struct bfd_elf_arch_map): Removed.
	(bfd_elf_arch_map, bfd_elf_arch_map_size): Don't declare.
	* elf32-target.h, elf64-target.h: Initialize elf_machine_code
	field with ELF_MACHINE_CODE.  Initialize elf_backend_object_p
	field with elf_backend_object_p (if it is defined).
	* elf32-gen.c, elf32-hppa.c, elf32-i386.c, elf32-i860.c,
	elf32-m68k.c, elf32-m88k.c, elf32-mips.c, elf32-sparc.c,
	elf64-gen.c (ELF_MACHINE_CODE): Defined.
	* elf32-mips.c: Include ecoffswap.h to get ECOFF swapping
	routines.
	(mips_elf_object_p): Set the right machine number.
	(mips_elf_ecoff_debug_swap): Defined.
	(elf_backend_object_p): Defined to be mips_elf_object_p.
	(elf_backend_ecoff_debug_swap): Defined to be
	mips_elf_ecoff_debug_swap.
	* elf.c (bfd_elf_arch_map, bfd_elf_arch_map_size): Removed.

	* libbfd-in.h (target_vector, default_vector): Declare.
	* libbfd.h: Rebuilt.
	* format.c (target_vector, default_vector): Don't declare.

	* elf32-mips.c (elf_mips_howto_table): Don't complain on overflow
	for R_MIPS_26.  Correct overflow detection requires matching the
	upper four bits of the destination against the PC.  From Ted Lemon
	<[email protected]>.

	* bout.c (b_out_reloc_type_lookup): Return type should point to
	const data.
	* coff-i960.c (coff_i960_reloc_type_lookup): Likewise.
	* elf32-hppa.c (elf_hppa_reloc_type_lookup): Likewise.
	* mipsbsd.c (MY(reloc_howto_type_lookup)): Likewise.
	* coff-i386.c (coff_i386_reloc): Made howto const.
	* oasys.c (oasys_write_data): Made how const.

	* libelf.h: Added some comments.
	(struct elf_backend_data): Added elf_backend_ecoff_debug_swap
	field.  Removed unused write_relocs field.
	* elf32-target.h: Adjusted elf_backend_data initialization
	accordingly.
	* elf64-target.h: Corrected elf_backend_data initialization to
	fill in all fields and to set elf_64_p to 1.

Mon Nov  8 18:13:14 1993  Ian Lance Taylor  ([email protected])

	* elfcode.h (bfd_section_from_shdr): Remove duplicate assignment
	to filepos in SHT_STRTAB case.
	(assign_file_position_for_section): Set BFD section filepos as
	well as ELF section sh_offset.

	* reloc.c: Use const instead of CONST.
	(bfd_perform_relocation): Make variable howto a const pointer.
	* bfd-in2.h, libbfd.h: Rebuilt.

Mon Nov  8 12:19:15 1993  Jim Kingdon  ([email protected])

	* Makefile.in (realclean): Don't remove generated headers.  Reverts
	change of 2 Jul 1993.

Mon Nov  8 06:08:31 1993  D. V. Henkel-Wallace  ([email protected])

	* configure.bfd: make unixware equivalent to sysv4.

	* config/i386-nlm.mt: bring in elf config; make it the default.

Sun Nov  7 20:21:38 1993  Jeffrey A. Law  ([email protected])

	* libbfd.c (bfd_put_8): Add parens around reference to "val"
	argument.

Fri Nov  5 21:45:09 1993  David J. Mackenzie  ([email protected])

	* hosts/i386mach3.h (HOST_SEGMENT_SIZE),
	i386mach3.c (SEGMENT_SIZE, TEXT_START_ADDR): Correct values (?).

Fri Nov  5 15:17:57 1993  Ian Lance Taylor  ([email protected])

	* coffcode.h (coff_write_object_contents): Zero out internal_a.

Fri Nov  5 10:41:07 1993  David J. Mackenzie  ([email protected])

	* aoutx.h, archive.c, archures.c, bfd.c, cache.c, coffcode.h,
	core.c, ctor.c, format.c, init.c, libbfd.c, opncls.c, reloc.c,
	section.c, syms.c, targets.c:
	Doc cleanup (spelling, punctuation, grammar, formatting).
	* bfd-in2.h, libbfd.h: Rebuild.

Thu Nov  4 14:46:14 1993  John Gilmore  ([email protected])

	* bfd-in.h (bfd_get_cacheable, bfd_set_cacheable):  New accessors.
	* bfd.c, opncls.c:  Improve comments on file descriptor cacheing.

Thu Nov  4 08:54:30 1993  Jeffrey A. Law  ([email protected])

	* From Pete Hoogenboom ([email protected])
	* elf32-hppa.c (hppa_elf_get_section_contents): Fix logic error
	in last change.  Always rebuild symbol extension section the first
	time though if output sections exist (fixes ld -r problems).

Thu Nov 04 08:08:46 1993  Jeffrey Wheat  ([email protected])

	* Makefile.in: Add .PHONY for check and installcheck rules.

Tue Nov  2 14:42:27 1993  Bill Cox ([email protected])

	* libbfd-in.h (artdata): Use long, not time_t for portability, at
	  least to HPUX.  File below is a derived file.

Tue Nov  2 14:42:27 1993  Bill Cox ([email protected])

	* libbfd.h (artdata): Use long, not time_t for portability, at
	  least to HPUX.

Tue Nov  2 09:32:25 1993  Jim Kingdon  ([email protected])

	* config.bfd: Use bigmips for mips*-*-bsd*.

Mon Nov  1 14:30:09 1993  Ian Lance Taylor  ([email protected])

	* elfcode.h (elf_slurp_reloca_table, elf_slurp_reloc_table):
	Handle symbol number of zero.

	* reloc.c (enum bfd_reloc_code_real): Added
	BFD_RELOC_MIPS_LITERAL, BFD_RELOC_MIPS_GOT16,
	BFD_RELOC_MIPS_CALL16, BFD_RELOC_MIPS_GPREL32.
	* bfd-in2.h: Rebuilt.
	* coff-mips.c (mips_bfd_reloc_type_lookup): Handle
	BFD_RELOC_MIPS_LITERAL.
	* elf32-mips.c (mips_reloc_map): Handle new relocs.
	(mips_elf_hi16_reloc, mips_elf_lo16_reloc): Rearrange _gp_disp
	checks slightly.

	* aout-target.h (MY_bfd_debug_info_start, MY_bfd_debug_info_end,
	MY_bfd_debug_info_accumulat [sic]): Remove unused definitions.
	(MY_bfd_get_relocated_section_contents, MY_bfd_relax_section,
	MY_bfd_seclet_link): Define.
	(MY_bfd_reloc_type_lookup): Rename from
	MY_reloc_howto_type_lookup.
	(MY_bfd_make_debug_symbol): Rename from MY_make_debug_symbol.
	(MY(vec)): Use JUMP_TABLE rather than listing functions.
	* hp300hpux.c (MY_get_symtab, MY_get_symtab_upper_bound,
	MY_canonicalize_reloc, MY_write_object_contents): Don't define in
	terms of MY, because that causes a recusive invocation of CAT when
	expanded within JUMP_TABLE, and ANSI compilers don't expand
	recursive macros.
	* mipsbsd.c (MY_bfd_reloc_type_lookup): Rename from
	MY_reloc_howto_type_lookup, and don't define in terms of MY.
	(MY_canonicalize_reloc): Don't define in terms of MY.
	(aout_mips_little_vec, aout_mips_big_vec): Use JUMP_TABLE rather
	than listing functions.

Mon Nov  1 09:12:25 1993  Jim Kingdon  ([email protected])

	* config.bfd: Use m68k-elf for m68*-*-sysv4*.

See file ChangeLog.1

\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: