[binutils.git] / gdb / doc / Makefile.in

##Copyright (C) 1991, 1992 Free Software Foundation, Inc.

# Makefile for GDB documentation.
# This file is part of GDB.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

srcdir = .

prefix = /usr/local

infodir = $(prefix)/info

SHELL = /bin/sh

INSTALL = install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)

# main GDB source directory
gdbdir = $(srcdir)/..

# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo

# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo

# where to find texi2roff, ditto
TEXI2ROFF=texi2roff

# Where is the source dir for the READLINE library doc?  
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc

SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS

# There may be alternate predefined collections of switches to configure
# the GDB manual.  Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all

# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
#    - Computer Modern (CM) fonts
#    - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
#  a4rc.sed     use A4 paper (297 x 210 mm)
#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
#      for A4, CM fonts:    REFEDITS = a4rc.sed
#      for US, PS fonts:    REFEDITS = psrc.sed
#      for default:
REFEDITS =

# Don Knuth's TeX formatter
TEX = tex

# auxiliary program for sorting Texinfo indices
TEXINDEX = texindex

# Main GDB manual's source files
SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi

SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)

SFILES_DOC = $(SFILES_LOCAL) \
                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi

#### Host, target, and site specific Makefile fragments come in here.
###

all install:

info: gdb.info gdbint.info stabs.info
dvi: gdb.dvi refcard.dvi gdbint.dvi
all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi

install-info: info
	for i in *.info* ; do \
		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
	done

STAGESTUFF = *.info* gdb-all.texi GDBvn.texi

# Copy the object files from a particular stage into a subdirectory.
stage1: force
	-mkdir stage1
	-mv $(STAGESTUFF) stage1

stage2: force
	-mkdir stage2
	-mv $(STAGESTUFF) stage2

stage3: force
	-mkdir stage3
	-mv $(STAGESTUFF) stage3

against=stage2

comparison: force
	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done

de-stage1: force
	-(cd stage1 ; mv -f * ..)
	-rmdir stage1

de-stage2: force
	-(cd stage2 ; mv -f * ..)
	-rmdir stage2

de-stage3: force
	-(cd stage3 ; mv -f * ..)
	-rmdir stage3

clean-info:
	rm -f gdb.info* gdbint.info* stabs.info*

clean-dvi:
	rm -f gdb.dvi refcard.dvi gdbint.dvi stabs.dvi sedref.dvi
	
mostlyclean: clean-info clean-dvi
	rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
	rm -f links2roff
	rm -f refcard.ps lrefcard.ps refcard.log sedref.* *~
	rm -f gdbint.?? gdbint.??? stabs.?? stabs.???

clean: mostlyclean
	rm -f GDBvn.texi rluser.texinfo inc-hist.texi

distclean: clean
	rm -f Makefile config.status

realclean: distclean clean-dvi clean-info

# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
	if [ -z "$(REFEDITS)" ]; then \
		cp $(srcdir)/refcard.tex sedref.tex ; \
	else \
		echo > tmp.sed ; \
		for f in "$(REFEDITS)" ; do \
			cat $(srcdir)/$$f >>tmp.sed ; done ; \
		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	fi
	$(SET_TEXINPUTS) $(TEX) sedref.tex
	mv sedref.dvi refcard.dvi
	rm -f sedref.log sedref.tex tmp.sed

refcard.ps : refcard.dvi
	dvips -t landscape refcard.dvi -o

# File to record current GDB version number (copied from main dir Makefile.in)
GDBvn.texi : ${gdbdir}/Makefile.in
	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new
	mv GDBvn.new GDBvn.texi

# Updated atomically
.PRECIOUS: GDBvn.texi

# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi

# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
#   source directory for the benefit of people who *don't* use this makefile,
#   VPATH will often tell make not to bother building it, because the one
#   in the srcdir is up to date.  (if not, then make should build one here).

# GDB MANUAL: TeX dvi file
gdb.dvi: ${SFILES_DOC}
	if [ ! -f ./GDBvn.texi ]; then \
		ln -s $(srcdir)/GDBvn.texi . || \
		ln $(srcdir)/GDBvn.texi . || \
		cp $(srcdir)/GDBvn.texi . ; else true; fi
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	$(TEXINDEX) gdb.??
	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s

# GDB MANUAL: info file
# We're using texinfo2, and older makeinfo's may not be able to
# cope with all the markup.  
gdb.info: ${SFILES_DOC}
	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo

# GDB MANUAL: roff translations
# Try to use a recent texi2roff.  v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing 
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
#    corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate

# texi2roff doesn't have a notion of include dirs, so we have to fake 
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(SFILES_INCLUDED)
	if [ ! -f gdb.texinfo ]; then \
		ln -s $(SFILES_INCLUDED) . || \
		ln $(SFILES_INCLUDED)    . || \
		cp $(SFILES_INCLUDED)    . ; \
	fi
	touch links2roff

#  "Readline" appendices.  Get them also due to lack of includes, 
# regardless of whether or not configuring in main sourcedir.
# @ftable removed due to bug in texi2roff-2; if your texi2roff
# is newer, try just ln or cp
rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
		sed -e 's/^@ftable/@table/g' \
		-e 's/^@end ftable/@end table/g' \
		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo

inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
	ln -s ${READLINE_DIR}/inc-hist.texi . || \
	ln ${READLINE_DIR}/inc-hist.texi . || \
	cp ${READLINE_DIR}/inc-hist.texi .

# gdb manual suitable for [gtn]roff -me
gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -me | \
	sed -e 's/---/\\(em/g' \
	>gdb.me 

# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -ms | \
	sed -e 's/---/\\(em/g' \
	>gdb.ms 

# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
#   try leaving them in
gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
	sed -e '/\\input texinfo/d' \
		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
		-e '/^@ifinfo/,/^@end ifinfo/d' \
		-e '/^@c /d' \
		-e 's/{.*,,/{/' \
		-e '/@noindent/d' \
		-e 's/@ / /g' \
		-e 's/^@alphaenumerate/@enumerate/g' \
		-e 's/^@end alphaenumerate/@end enumerate/g' \
		$(srcdir)/gdb.texinfo | \
	$(TEXI2ROFF) -mm | \
	sed -e 's/---/\\(em/g' \
	>gdb.mm 

# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi : gdbint.texinfo
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	$(TEXINDEX) gdbint.??
	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
		gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs

# GDB INTERNALS MANUAL: info file
gdb-internals: gdbint.info

gdbint.info: gdbint.texinfo
	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo

stabs.info: stabs.texinfo
	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo

# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : stabs.texinfo
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	$(TEXINDEX) stabs.??
	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
		stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs

stabs.ps: stabs.dvi
	dvips -o stabs.ps stabs

force:

Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
	$(SHELL) ./config.status
Commit	Line	Data
787c6bfe	1	##Copyright (C) 1991, 1992 Free Software Foundation, Inc.
1eb988b9 RP	2
	3	# Makefile for GDB documentation.
	4	# This file is part of GDB.
	5
	6	# This program is free software; you can redistribute it and/or modify
	7	# it under the terms of the GNU General Public License as published by
	8	# the Free Software Foundation; either version 2 of the License, or
	9	# (at your option) any later version.
	10	#
	11	# This program is distributed in the hope that it will be useful,
	12	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	# GNU General Public License for more details.
	15	#
	16	# You should have received a copy of the GNU General Public License
	17	# along with this program; if not, write to the Free Software
	18	# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	19
dc341d8b RP	20	srcdir = .
dc341d8b RP	21
570e1733 RP	22	prefix = /usr/local
570e1733 RP	23
787c6bfe	24	infodir = $(prefix)/info
dc341d8b RP	25
	26	SHELL = /bin/sh
	27
570e1733 RP	28	INSTALL = install -c
	29	INSTALL_PROGRAM = $(INSTALL)
	30	INSTALL_DATA = $(INSTALL)
	31
1eb988b9	32	# main GDB source directory
18fae2a8	33	gdbdir = $(srcdir)/..
1eb988b9 RP	34
1eb988b9 RP	35	# where to find texinfo; GDB dist should include a recent one
18fae2a8	36	TEXIDIR=${gdbdir}/../texinfo
1eb988b9 RP	37
	38	# where to find makeinfo, preferably one designed for texinfo-2
	39	MAKEINFO=makeinfo
	40
92b73793 RP	41	# where to find texi2roff, ditto
	42	TEXI2ROFF=texi2roff
	43
18fae2a8 RP	44	# Where is the source dir for the READLINE library doc?
	45	# Traditionally readline is in .. or .
	46	READLINE_DIR = ${gdbdir}/../readline/doc
	47
	48	SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
	49
2685ead7 RP	50	# There may be alternate predefined collections of switches to configure
	51	# the GDB manual. Normally this is not done in synch with the software
	52	# config system, since this choice tends to be independent; most people
	53	# want a doc config of `all' for a generic manual, regardless of sw config.
1d7c3357 RP	54	DOC_CONFIG = all
1d7c3357 RP	55
2685ead7 RP	56	# This list of sed edits will edit the GDB reference card
	57	# for what fonts and what papersize to use.
	58	# By default (NO edits applied), the refcard uses:
	59	# - Computer Modern (CM) fonts
	60	# - US letter paper (8.5x11in)
	61	# List some of the following files for alternative fonts and paper:
	62	# a4rc.sed use A4 paper (297 x 210 mm)
	63	# psrc.sed use PostScript fonts (Karl Berry short TeX names)
	64	# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
	65	# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
	66	# for A4, CM fonts: REFEDITS = a4rc.sed
	67	# for US, PS fonts: REFEDITS = psrc.sed
	68	# for default:
	69	REFEDITS =
	70
18fae2a8 RP	71	# Don Knuth's TeX formatter
	72	TEX = tex
	73
	74	# auxiliary program for sorting Texinfo indices
	75	TEXINDEX = texindex
1eb988b9 RP	76
1eb988b9 RP	77	# Main GDB manual's source files
4af6d502	78	SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
18fae2a8 RP	79
18fae2a8 RP	80	SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
1eb988b9	81
18fae2a8 RP	82	SFILES_DOC = $(SFILES_LOCAL) \
18fae2a8 RP	83	$(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
92b73793	84
4f98572e RP	85	#### Host, target, and site specific Makefile fragments come in here.
	86	###
	87
e92ee469 RP	88	all install:
e92ee469 RP	89
612dbd4c	90	info: gdb.info gdbint.info stabs.info
6a962504	91	dvi: gdb.dvi refcard.dvi gdbint.dvi
1041a570	92	all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi
dc341d8b	93
570e1733	94	install-info: info
dc341d8b	95	for i in .info ; do \
570e1733	96	$(INSTALL_DATA) $$i $(infodir)/$$i ; \
dc341d8b	97	done
1eb988b9	98
18fae2a8	99	STAGESTUFF = .info gdb-all.texi GDBvn.texi
332523bf RP	100
	101	# Copy the object files from a particular stage into a subdirectory.
	102	stage1: force
	103	-mkdir stage1
	104	-mv $(STAGESTUFF) stage1
	105
	106	stage2: force
	107	-mkdir stage2
	108	-mv $(STAGESTUFF) stage2
	109
	110	stage3: force
	111	-mkdir stage3
	112	-mv $(STAGESTUFF) stage3
	113
	114	against=stage2
	115
	116	comparison: force
	117	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
	118
	119	de-stage1: force
570e1733 RP	120	-(cd stage1 ; mv -f * ..)
570e1733 RP	121	-rmdir stage1
332523bf RP	122
332523bf RP	123	de-stage2: force
570e1733 RP	124	-(cd stage2 ; mv -f * ..)
570e1733 RP	125	-rmdir stage2
332523bf RP	126
332523bf RP	127	de-stage3: force
570e1733 RP	128	-(cd stage3 ; mv -f * ..)
570e1733 RP	129	-rmdir stage3
332523bf	130
18fae2a8 RP	131	clean-info:
	132	rm -f gdb.info* gdbint.info* stabs.info*
	133
	134	clean-dvi:
2685ead7	135	rm -f gdb.dvi refcard.dvi gdbint.dvi stabs.dvi sedref.dvi
18fae2a8 RP	136
	137	mostlyclean: clean-info clean-dvi
	138	rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me
	139	rm -f links2roff
2685ead7	140	rm -f refcard.ps lrefcard.ps refcard.log sedref.* *~
18fae2a8 RP	141	rm -f gdbint.?? gdbint.??? stabs.?? stabs.???
	142
	143	clean: mostlyclean
	144	rm -f GDBvn.texi rluser.texinfo inc-hist.texi
	145
	146	distclean: clean
	147	rm -f Makefile config.status
	148
b397d5b8	149	realclean: distclean clean-dvi clean-info
18fae2a8	150
2685ead7 RP	151	# GDB QUICK REFERENCE (dvi output)
	152	refcard.dvi : refcard.tex $(REFEDITS)
	153	if [ -z "$(REFEDITS)" ]; then \
b9b9f55a	154	cp $(srcdir)/refcard.tex sedref.tex ; \
2685ead7 RP	155	else \
	156	echo > tmp.sed ; \
	157	for f in "$(REFEDITS)" ; do \
	158	cat $(srcdir)/$$f >>tmp.sed ; done ; \
	159	sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
	160	fi
	161	$(SET_TEXINPUTS) $(TEX) sedref.tex
	162	mv sedref.dvi refcard.dvi
	163	rm -f sedref.log sedref.tex tmp.sed
	164
	165	refcard.ps : refcard.dvi
	166	dvips -t landscape refcard.dvi -o
1eb988b9	167
1eb988b9	168	# File to record current GDB version number (copied from main dir Makefile.in)
18fae2a8	169	GDBvn.texi : ${gdbdir}/Makefile.in
af08a43a JK	170	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new
	171	mv GDBvn.new GDBvn.texi
	172
	173	# Updated atomically
	174	.PRECIOUS: GDBvn.texi
18fae2a8	175
1d7c3357 RP	176	# Choose configuration for GDB manual (normally `all'; normally not tied into
	177	# `configure' script because most users prefer generic version of manual,
	178	# not one for their binary config---which may not be specifically
	179	# defined anyways).
c15024ee JK	180	gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
	181	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	182	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi \|\| \
	183	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
1d7c3357	184
18fae2a8 RP	185	# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
	186	# If your texinfo or makeinfo don't support these, get a new texinfo release
	187	#
	188	# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
	189	# Note that we can generate GDBvn.texi, but since we distribute one in the
cacf5942 RP	190	# source directory for the benefit of people who don't use this makefile,
	191	# VPATH will often tell make not to bother building it, because the one
	192	# in the srcdir is up to date. (if not, then make should build one here).
787c6bfe	193
1eb988b9	194	# GDB MANUAL: TeX dvi file
18fae2a8 RP	195	gdb.dvi: ${SFILES_DOC}
	196	if [ ! -f ./GDBvn.texi ]; then \
	197	ln -s $(srcdir)/GDBvn.texi . \|\| \
	198	ln $(srcdir)/GDBvn.texi . \|\| \
	199	cp $(srcdir)/GDBvn.texi . ; else true; fi
	200	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	201	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	202	$(TEXINDEX) gdb.??
	203	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
	204	rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s
1eb988b9 RP	205
	206	# GDB MANUAL: info file
	207	# We're using texinfo2, and older makeinfo's may not be able to
18fae2a8 RP	208	# cope with all the markup.
	209	gdb.info: ${SFILES_DOC}
	210	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
92b73793 RP	211
	212	# GDB MANUAL: roff translations
	213	# Try to use a recent texi2roff. v2 was put on prep in jan91.
	214	# If you want an index, see texi2roff doc for postprocessing
	215	# and add -i to texi2roff invocations below.
	216	# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
cacf5942	217	# corresponding -e lines when later texi2roff's are current)
92b73793 RP	218	# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
	219	# + @c's deleted explicitly because texi2roff sees texinfo commands in them
	220	# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
	221	# + @alphaenumerate is ridiculously new, turned into @enumerate
	222
18fae2a8 RP	223	# texi2roff doesn't have a notion of include dirs, so we have to fake
	224	# it out for gdb manual's include files---but only if not configured
	225	# in main sourcedir.
	226	links2roff: $(SFILES_INCLUDED)
1d7c3357	227	if [ ! -f gdb.texinfo ]; then \
18fae2a8 RP	228	ln -s $(SFILES_INCLUDED) . \|\| \
	229	ln $(SFILES_INCLUDED) . \|\| \
	230	cp $(SFILES_INCLUDED) . ; \
	231	fi
	232	touch links2roff
	233
	234	# "Readline" appendices. Get them also due to lack of includes,
	235	# regardless of whether or not configuring in main sourcedir.
	236	# @ftable removed due to bug in texi2roff-2; if your texi2roff
	237	# is newer, try just ln or cp
	238	rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
	239	sed -e 's/^@ftable/@table/g' \
5f92dab8	240	-e 's/^@end ftable/@end table/g' \
18fae2a8 RP	241	${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
	242
	243	inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
	244	ln -s ${READLINE_DIR}/inc-hist.texi . \|\| \
	245	ln ${READLINE_DIR}/inc-hist.texi . \|\| \
	246	cp ${READLINE_DIR}/inc-hist.texi .
	247
	248	# gdb manual suitable for [gtn]roff -me
	249	gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	250	sed -e '/\\input texinfo/d' \
	251	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	252	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	253	-e '/^@c /d' \
92b73793	254	-e 's/{.*,,/{/' \
92b73793 RP	255	-e 's/@ / /g' \
	256	-e 's/^@alphaenumerate/@enumerate/g' \
	257	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	258	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	259	$(TEXI2ROFF) -me \| \
92b73793	260	sed -e 's/---/\\(em/g' \
18fae2a8	261	>gdb.me
92b73793	262
18fae2a8 RP	263	# gdb manual suitable for [gtn]roff -ms
18fae2a8 RP	264	gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	265	sed -e '/\\input texinfo/d' \
	266	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	267	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	268	-e '/^@c /d' \
92b73793 RP	269	-e 's/{.*,,/{/' \
	270	-e 's/@ / /g' \
	271	-e 's/^@alphaenumerate/@enumerate/g' \
	272	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	273	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	274	$(TEXI2ROFF) -ms \| \
92b73793	275	sed -e 's/---/\\(em/g' \
18fae2a8	276	>gdb.ms
92b73793	277
18fae2a8 RP	278	# gdb manual suitable for [tn]roff -mm
	279	# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
	280	# try leaving them in
	281	gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
92b73793 RP	282	sed -e '/\\input texinfo/d' \
	283	-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
	284	-e '/^@ifinfo/,/^@end ifinfo/d' \
50a39795	285	-e '/^@c /d' \
92b73793	286	-e 's/{.*,,/{/' \
18fae2a8	287	-e '/@noindent/d' \
92b73793 RP	288	-e 's/@ / /g' \
	289	-e 's/^@alphaenumerate/@enumerate/g' \
	290	-e 's/^@end alphaenumerate/@end enumerate/g' \
18fae2a8 RP	291	$(srcdir)/gdb.texinfo \| \
18fae2a8 RP	292	$(TEXI2ROFF) -mm \| \
92b73793	293	sed -e 's/---/\\(em/g' \
18fae2a8	294	>gdb.mm
1eb988b9 RP	295
	296	# GDB INTERNALS MANUAL: TeX dvi file
	297	gdbint.dvi : gdbint.texinfo
18fae2a8 RP	298	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
	299	$(TEXINDEX) gdbint.??
	300	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
1eb988b9 RP	301	rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \
	302	gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs
	303
	304	# GDB INTERNALS MANUAL: info file
dc341d8b	305	gdb-internals: gdbint.info
1eb988b9	306
dc341d8b RP	307	gdbint.info: gdbint.texinfo
dc341d8b RP	308	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
1eb988b9	309
e505224d PB	310	stabs.info: stabs.texinfo
	311	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
	312
612dbd4c JG	313	# STABS DOCUMENTATION: TeX dvi file
612dbd4c JG	314	stabs.dvi : stabs.texinfo
18fae2a8 RP	315	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
	316	$(TEXINDEX) stabs.??
	317	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
612dbd4c JG	318	rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \
	319	stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs
	320
	321	stabs.ps: stabs.dvi
	322	dvips -o stabs.ps stabs
	323
dc341d8b	324	force:
1eb988b9	325
dc341d8b RP	326	Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
dc341d8b RP	327	$(SHELL) ./config.status