2013-02-05 Andreas Tobler <[email protected]>

[binutils.git] / gdb / ChangeLog

2013-02-05  Andreas Tobler  <[email protected]>

	* NEWS: Add PowerPC FreeBSD as a new native configuration.

2013-02-04  Andreas Tobler  <[email protected]>

	* Makefile.in (ALL_TARGET_OBS): Add powerpc FreeBSD files.
	* configure.host: Add powerpc*-*-freebsd* target.
	* configure.tgt: Add target info for powerpc*-*-freebsd*.
	* ppcfbsd-nat.c, ppcfbsd-tdep.h, ppcfbsd-tdep.c: New files.
	* config/powerpc/fbsd.mh: New file.

2013-02-04  Sergio Durigan Junior  <[email protected]>
	    Denys Vlasenko  <[email protected]>
	    Pedro Alves  <[email protected]>

	* gdbarch.sh (elfcore_write_linux_prpsinfo): New F hook.
	(struct elf_internal_linux_prpsinfo): Forward declare.
	* gdbarch.h, gdbarch.c: Regenerate.
	* linux-tdep.c: Include `cli/cli-utils.h'.
	(linux_fill_prpsinfo): New function.
	(linux_make_corefile_notes): Use linux_fill_prpsinfo.  If there's
	an elfcore_write_linux_prpsinfo hook, use it, otherwise, use
	elfcore_write_linux_prpsinfo32 or elfcore_write_linux_prpsinfo64
	depending on gdbarch pointer bitness.
	* ppc-linux-tdep.c: Include elf-bfd.h.
	(ppc_linux_init_abi): Hook in elfcore_write_ppc_linux_prpsinfo32
	on 32-bit.

2013-02-04  Jim MacArthur  <[email protected]>
	    Marcus Shawcroft  <[email protected]>
	    Nigel Stephens  <[email protected]>
	    Yufeng Zhang  <[email protected]>

	* configure.tgt (aarch64*-*-linux*): Set build_gdbserver=yes.

2013-02-04  Jim MacArthur  <[email protected]>
	    Marcus Shawcroft  <[email protected]>
	    Nigel Stephens  <[email protected]>
	    Yufeng Zhang  <[email protected]>

	* aarch64-newlib-tdep.c: New file.
	* configure.tgt: Add aarch64-newlib-tdep.o to gdb_target_obs of
	aarch64*-*-elf.
	* defs.h (enum gdb_osabi): Add GDB_OSABI_NEWLIB.
	* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-newlib-tdep.o.
	(ALLDEPFILES): Add aarch64-newlib-tdep.c.
	* osabi.c (gdb_osabi_names): Add "Newlib".

2013-02-04  Jim MacArthur  <[email protected]>
	    Marcus Shawcroft  <[email protected]>
	    Nigel Stephens  <[email protected]>
	    Yufeng Zhang  <[email protected]>

	* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-linux-tdep.o.
	(ALLDEPFILES): Add aarch64-linux-tdep.c.
	* aarch64-linux-tdep.c: New file.
	* aarch64-linux-tdep.h: New file.
	* aarch64-tdep.h (gdbarch_tdep): Define gregset and fpregset.
	* configure.tgt: Add aarch64-none-linux-gnu.

2013-02-04  Jim MacArthur  <[email protected]>
	    Marcus Shawcroft  <[email protected]>
	    Nigel Stephens  <[email protected]>
	    Yufeng Zhang  <[email protected]>

	* Makefile.in (ALL_64_TARGET_OBS): Add arch64-tdep.o.
	(HFILES_NO_SRCDIR): Add aarch64-tdep.h.
	(ALLDEPFILES): Add aarch64-tdep.c.
	* aarch64-tdep.c: New file.
	* aarch64-tdep.h: New file.
	* configure.tgt: Add AArch64.
	* features/Makefile (WHICH): Add aarch64 and aarch64-without-fpu.
	(aarch64-expedite): New definition.
	* features/aarch64-core.xml: New file.
	* features/aarch64-fpu.xml: New file.
	* features/aarch64-without-fpu.c: New file (generated).
	* features/aarch64-without-fpu.xml: New file.
	* features/aarch64.c: New file (generated).
	* features/aarch64.xml: New file.
	* regformats/aarch64-without-fpu.dat: New file (generated).
	* regformats/aarch64.dat: New file (generated).

2013-02-03  Jan Kratochvil  <[email protected]>

	* contrib/expect-read1.c: New file.
	* contrib/expect-read1.sh: New file.

2013-02-03  Jan Kratochvil  <[email protected]>

	* dwarf2read.c (file_file_name): New function with code from
	file_full_name.
	(file_full_name): Move most of the code to file_file_name.
	(macro_start_file): Rename variable full_name to file_name and use
	file_file_name for it.  Add comp_dir parameter to new_macro_table.
	* macrocmd.c (show_pp_source_pos): New variable fullname.  Replace any
	macro_source_file->filename access by macro_source_fullname call.
	* macroscope.c (_initialize_macroscope): Update the new_macro_table
	caller.
	* macrotab.c (struct macro_table): New field comp_dir.
	(macro_include): New variables link_fullname and source_fullname.
	Replace any macro_source_file->filename access by macro_source_fullname
	call.
	(macro_lookup_inclusion): Remove the partial filenames checking code.
	(check_for_redefinition): New variables source_fullname and
	found_key_fullname.  Replace any macro_source_file->filename access by
	macro_source_fullname call.
	(macro_undef): New variables source_fullname and key_fullname.  Replace
	any macro_source_file->filename access by macro_source_fullname call.
	(macro_lookup_definition): New variables retval and source_fullname.
	Replace any macro_source_file->filename access by macro_source_fullname
	call.
	(foreach_macro): New variable key_fullname.  Replace any
	macro_source_file->filename access by macro_source_fullname call.
	(foreach_macro_in_scope): New variable datum_fullname.  Replace any
	macro_source_file->filename access by macro_source_fullname call.
	(new_macro_table): Add parameter comp_dir.  Initialize T with it.
	(macro_source_fullname): New function.
	* macrotab.h (struct macro_source_file): Extent the filename field
	comment.
	(new_macro_table): New parameter comp_dir, add a comment for it.
	(macro_source_fullname): new declaration.

2013-02-03  Jan Kratochvil  <[email protected]>

	* dwarf2read.c (dw2_map_symtabs_matching_filename): Move variable
	this_real_name to outer block.  Use it also for
	compare_filenames_for_search.
	(dw2_expand_symtabs_matching): New variable this_real_name.  Use it
	with dw2_get_real_path for file_matcher, considering also
	BASENAMES_MAY_DIFFER.
	(file_full_name): Prepend COMP_DIR even for relative lh->INCLUDE_DIRS.

2013-02-03  Jan Kratochvil  <[email protected]>

	* dwarf2read.c (dw2_expand_symtabs_matching): Add basenames parameter
	to the file_matcher parameter.  Pass 0 to it.
	(dwarf2_create_include_psymtab): Copy also DIRNAME.
	* psymtab.c (partial_map_symtabs_matching_filename): Drop handling of
	NULL psymtab_to_fullname result.
	(psymtab_to_fullname): Remove variable r.  Never return NULL, assemble
	an expected filename instead.
	(expand_symtabs_matching_via_partial): Add basenames parameter to the
	file_matcher parameter.  Call also psymtab_to_fullname, after newly
	considering BASENAMES_MAY_DIFFER.
	* source.c (rewrite_source_path): Remove static.
	* source.h (rewrite_source_path): New declaration.
	* symfile.h (struct quick_symbol_functions): Add basenames parameter to
	the expand_symtabs_matching field.  Comment it.
	* symtab.c (file_matches): New function comment.  Add parameter
	basenames, implement it.
	(search_symbols_file_matches): Add basenames parameter.  Update the
	file_matches caller.
	(search_symbols): Match FILES also against symtab_to_fullname.
	Optimize it for BASENAMES_MAY_DIFFER.

2013-02-03  Jan Kratochvil  <[email protected]>

	* source.c (print_source_lines_base): Print for TUI also "fullname".
	* tui/tui-data.c (init_content_element): Change tui_locator_element
	field to full_name.
	* tui/tui-data.h (struct tui_locator_element): Likewise.
	* tui/tui-disasm.c (tui_show_disassem_and_update_source): Rename
	tui_update_locator_filename calls to tui_update_locator_fullname.
	Replace symtab->filename refererence by symtab_to_fullname call.
	* tui/tui-out.c (tui_field_string): Check for "fullname" now.
	* tui/tui-source.c (tui_set_source_content): Change tui_locator_element
	field to full_name.  Replace symtab->filename refererence by
	symtab_to_fullname call.
	(tui_show_symtab_source): Rename parameter to fullname.  Change
	tui_locator_element field to full_name.
	* tui/tui-stack.c: Include source.h.
	(tui_set_locator_filename): Rename the declaration to ...
	(tui_set_locator_fullname): ... here.  Rename its parameter to
	fullname, updates its comment.
	(tui_set_locator_info): Rename its parameter to fullname.
	(tui_set_locator_filename): Rename the definition to ...
	(tui_set_locator_fullname): ... here.  Rename its parameter to
	fullname, updates its comment.  Change tui_locator_element field to
	full_name.
	(tui_set_locator_info): Rename its parameter to fullname.
	(tui_set_locator_info): Rename callee to tui_set_locator_fullname.
	(tui_update_locator_filename): Rename to ...
	(tui_update_locator_fullname): ... here. Rename callee to
	tui_set_locator_fullname.
	(tui_show_frame_info): Replace symtab->filename refererence by
	symtab_to_fullname call.
	* tui/tui-stack.h (tui_update_locator_filename): Rename to ...
	(tui_update_locator_fullname): ... here.
	* tui/tui-winsource.c (tui_display_main): Rename the callee to
	tui_update_locator_fullname.  Replace symtab->filename refererence by
	symtab_to_fullname call.
	* tui/tui.c (tui_show_source): Rename its parameter to fullname.
	Rename the callee to tui_update_locator_fullname.
	* tui/tui.h (tui_show_source): Rename its parameter to fullname.

2013-02-03  Jan Kratochvil  <[email protected]>

	* ada-lang.c (user_select_syms): Replace symtab->filename refererences
	by symtab_to_filename_for_display calls.
	* breakpoint.c (print_breakpoint_location, resolve_sal_pc): Likewise.
	(clear_command): New variable sal_fullname, initialize it.  Replace
	compare_filenames_for_search by filename_cmp with sal_fullname.
	(say_where, update_static_tracepoint): Replace symtab->filename
	refererences by symtab_to_filename_for_display calls.
	* cli/cli-cmds.c (edit_command, list_command, ambiguous_line_spec):
	Likewise.
	* dwarf2read.c: Include source.h.
	(fixup_go_packaging): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	* linespec.c (add_sal_to_sals): Rename variable filename to fullname.
	Replace symtab->filename refererences by symtab_to_filename_for_display
	calls.
	(create_sals_line_offset, convert_linespec_to_sals): New variable
	fullname, initialize it, replace symtab->filename reference by the
	variable.
	* linux-fork.c: Include source.h.
	(info_checkpoints_command): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	* macroscope.c (sal_macro_scope): Replace symtab->filename refererences
	by symtab_to_filename_for_display calls.
	* mdebugread.c: Include source.h.
	(psymtab_to_symtab_1): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file)
	(mi_cmd_file_list_exec_source_files): Likewise.
	* printcmd.c: Include source.h.
	(build_address_symbolic): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	* psymtab.c (partial_map_symtabs_matching_filename)
	(read_psymtabs_with_fullname): Call compare_filenames_for_search also
	with psymtab_to_fullname.
	* python/py-symtab.c (stpy_str): Replace symtab->filename refererences
	by symtab_to_filename_for_display calls.
	(stpy_get_filename): New variable filename, initialize it, use instead
	of symtab->filename refererences.
	(salpy_str): Make variable filename const char *.  Replace
	symtab->filename refererences by symtab_to_filename_for_display calls.
	* skip.c: Include source.h and filenames.h.
	(skip_file_command): Remove const from the symtab variable.  Replace
	symtab->filename refererences by symtab_to_fullname call.
	(function_name_is_marked_for_skip): New variables searched_for_fullname
	and fullname.  Use them to search also with symtab's fullname.
	* source.c (find_source_lines): Replace symtab->filename refererences
	by symtab_to_filename_for_display calls.
	(print_source_lines_base): New variable filename, use it instead of
	symtab->filename.  Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	(line_info, forward_search_command): Replace symtab->filename
	refererences by symtab_to_filename_for_display calls.
	(reverse_search_command): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.  New variable filename for it.
	* stack.c (frame_info): Likewise.
	* symmisc.c: Include source.h.
	(dump_objfile, dump_symtab_1, maintenance_print_symbols)
	(maintenance_info_symtabs): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	* symtab.c (iterate_over_some_symtabs): Call
	compare_filenames_for_search also with symtab_to_fullname.
	(lookup_symbol_aux_quick, basic_lookup_transparent_type_quick): Replace
	symtab->filename refererences by symtab_to_filename_for_display calls.
	(find_line_symtab): Replace symtab->filename refererences by
	symtab_to_filename_for_display calls.
	(file_matches): Replace filename_cmp by compare_filenames_for_search.
	(print_symbol_info): Make the last parameter const char *.  New
	variable s_filename.  Use it in the function.
	(symtab_symbol_info): Make the last_filename variable const char *.
	Replace symtab->filename refererences by symtab_to_filename_for_display
	calls.
	(rbreak_command): New variable fullname.  Use it.  Replace
	symtab->filename refererence by symtab_to_filename_for_display call.
	* tracepoint.c (set_traceframe_context, trace_find_line_command)
	(print_one_static_tracepoint_marker): Replace symtab->filename
	refererences by symtab_to_filename_for_display calls.
	* tui/tui-source.c (tui_set_source_content): New variables filename and
	s_filename.  Replace symtab->filename refererences by this variable.
	Replace other symtab->filename refererences by
	symtab_to_filename_for_display calls.

2013-02-03  Eldar Gaynetdinov <[email protected]>
	    Jan Kratochvil  <[email protected]>

	Add a new variable that controls a way in which filenames are
	displayed.
	* NEWS (set filename-display): New entry.
	* source.c (filename_display_basename, filename_display_relative)
	(filename_display_absolute, filename_display_kind_names)
	(filename_display_string, show_filename_display_string)
	(symtab_to_filename_for_display): New.
	(_initialize_source): Added initialization of 'filename-display'
	variable.
	* source.h (symtab_to_filename_for_display): Added declaration.
	* stack.c (print_frame): Added new variable and calling of a new
	function and condition with this variable. Changed third argument of
	calling of a function.

2013-02-03  Jan Kratochvil  <[email protected]>

	* tui/tui-data.c (init_win_info, tui_del_window, tui_free_window):
	Rename field reference filename to fullname.
	* tui/tui-data.h (struct tui_source_info): Rename field filename to
	fullname.  New comment for it.
	* tui/tui-source.c (tui_set_source_content): Rename field reference
	filename to fullname.  Initialize field by symtab_to_fullname now.
	* tui/tui-winsource.c (tui_update_breakpoint_info): Rename field
	reference filename to fullname.  Use symtab_to_fullname during
	comparison.

2013-02-03  Jan Kratochvil  <[email protected]>

	Code cleanup.
	* dwarf2read.c (dw2_expand_symtabs_with_filename): Rename to ...
	(dw2_expand_symtabs_with_fullname): ... here.  Rename parameter
	filename to fullname.  Rename variable this_name to this_fullname.
	Lowercase FILENAME_CMP call.
	(dw2_find_symbol_file): New comment for the returned string.
	(dwarf2_gdb_index_functions): Rename the function to
	dw2_expand_symtabs_with_fullname.
	* psymtab.c (read_psymtabs_with_filename): Rename to ...
	(read_psymtabs_with_fullname): ... here.  Rename parameter filename to
	fullname.
	(psym_functions): Rename the function to read_psymtabs_with_fullname.
	* symfile.h (struct quick_symbol_functions): Rename field
	expand_symtabs_with_filename to expand_symtabs_with_fullname and its
	parameter filename to fullname.  Document returned string meaning for
	find_symbol_file.
	* symtab.c (find_line_symtab): Rename the called function to
	expand_symtabs_with_fullname.

2013-02-03  Jan Kratochvil  <[email protected]>

	Code cleanup.
	* breakpoint.c (clear_command): Remove variable is_abs, unify the
	call of filename_cmp with compare_filenames_for_search.
	* dwarf2read.c (dw2_map_symtabs_matching_filename): Remove variable
	is_abs, unify the call of FILENAME_CMP with
	compare_filenames_for_search.  New gdb_asserts for real_path and name.
	Unify the call of compare_filenames_for_search with FILENAME_CMP.
	* psymtab.c (partial_map_symtabs_matching_filename): Likewise.
	* symfile.h (struct quick_symbol_functions): Extend the comment for
	map_symtabs_matching_filename.
	* symtab.c (compare_filenames_for_search): Remove the function comment
	relative path requirement.  Handle absolute filenames, with a comment.
	(iterate_over_some_symtabs): Remove variable is_abs, unify the call of
	FILENAME_CMP with compare_filenames_for_search.  New gdb_asserts for
	real_path and name.  Unify the call of compare_filenames_for_search
	with FILENAME_CMP.
	(iterate_over_symtabs): New gdb_assert on REAL_PATH.

2013-02-03  Jan Kratochvil  <[email protected]>

	Code cleanup.
	* breakpoint.c (print_breakpoint_location): Replace bp_location field
	source_file references by symtab field references.  Remove variables
	sal and fullname.
	(momentary_breakpoint_from_master, add_location_to_breakpoint):
	(clear_command, say_where): Replace bp_location field source_file
	references by symtab field references.
	(bp_location_dtor): Remove the source_file reference.
	(update_static_tracepoint): Replace bp_location field source_file
	references by symtab field references.
	(breakpoint_free_objfile): New function.
	* breakpoint.h (struct bp_location): Extend the comment for line_number.
	Replace the field source_file by field symtab, extend its comment.
	(breakpoint_free_objfile): New declaration.
	* objfiles.c (free_objfile): Call breakpoint_free_objfile.
	* tui/tui-winsource.c (tui_update_breakpoint_info): Replace bp_location
	field source_file references by symtab field references.

2013-02-03  Jan Kratochvil  <[email protected]>

	Replace xfullpath calls by gdb_realpath calls.
	* cli/cli-cmds.c (find_and_open_script): Remove xfullpath from the
	function comment.
	* dwarf2read.c (dw2_map_expand_apply): Remove parameter full_path.
	Remove it from the iterate_over_some_symtabs call.
	(dw2_map_symtabs_matching_filename): Remove parameter full_path.
	Remove it from the dw2_map_expand_apply calls, remove a block handling
	it.
	* psymtab.c (partial_map_expand_apply): Remove parameter full_path.
	Remove it from the iterate_over_some_symtabs call.
	(partial_map_symtabs_matching_filename): Remove parameter full_path.
	Remove it from the partial_map_expand_apply calls, remove a block
	handling it.  Drop gdb_realpath call and cleanups from the real_path
	handling.
	* source.c (openp): Drop the comment part about xfullpath.  Replace
	xfullpath calls by gdb_realpath calls.
	(find_and_open_source): Replace xfullpath call by gdb_realpath call.
	* symfile.h (struct quick_symbol_functions): Remove parameter full_path
	from method map_symtabs_matching_filename and its comment.
	* symmisc.c (maintenance_print_msymbols): Replace xfullpath call by
	gdb_realpath call.
	* symtab.c (iterate_over_some_symtabs): Remove parameter full_path,
	remove it also from the function comment, remove a block handling it.
	Drop gdb_realpath call and cleanups from the real_path handling.
	(iterate_over_symtabs): Drop variable full_path and its use.
	* symtab.h (iterate_over_some_symtabs): Remove parameter full_path.
	* utils.c (xfullpath): Remove.
	* utils.h (xfullpath): Remove.

2013-02-01  Andreas Tobler  <[email protected]>

	* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
	(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
	(ALLDEPFILES): Add ppc64-tdep.c.
	* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
	ppc64-tdep.o to gdb_target_obs.
	* ppc64-tdep.h: New file.
	* ppc64-tdep.c: New file.
	(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
	ppc-linux-tdep.c to here.
	(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
	(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
	(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
	(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
	from ppc-linux-tdep.c to here.
	(ppc64_convert_from_func_ptr_addr): Rename from
	ppc64_linux_convert_from_func_ptr_addr to
	ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
	here.
	* rs6000-tdep.c:
	(read_insn): Move from ppc-linux-tdep.c to here.
	(insns_match_pattern, insn_d_field, insn_ds_field): Move
	from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
	* ppc-linux-tdep.c: Include ppc64-tdep.h.
	Removed above functions.
	(ppc_linux_init_abi): Adjust.

2013-02-01  Aleksandar Ristovski  <[email protected]>

	* ada-valprint.c (ada_print_floating): Remove unused 'len'.

2013-02-01  Aleksandar Ristovski  <[email protected]>

	* ada-lang.c (assign_aggregate): Remove unused 'is_array_aggregate'.

2013-02-01  Pedro Alves  <[email protected]>

	* dummy-frame.c (deprecated_pc_in_call_dummy): Delete function.
	* frame.h (deprecated_pc_in_call_dummy): Delete declaration.

2013-02-01  Jan Kratochvil  <[email protected]>

	* elfread.c (elf_symfile_read): Limit separate debug info additions to
	files with no separate debug info.
	* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
	* symfile.c (read_symbols): Call find_separate_debug_file_in_section
	only for files with no separate debug info.

2013-01-31  Tom Tromey  <[email protected]>

	* jit.c (jit_program_space_data): Rename from jit_inferior_data;
	change type.
	(struct jit_program_space_data): Rename from jit_inferior_data.
	Update comments.
	(get_jit_program_space_data): Rename from get_jit_inferior_data.
	Change return type.  Attach data to program space.
	(jit_program_space_data_cleanup): Rename from
	jit_inferior_data_cleanup; change argument type.
	(jit_read_descriptor): Change 'inf_data' argument to 'ps_data',
	change type.
	(jit_register_code): Update.
	(jit_update_inferior_cache): Remove.
	(jit_breakpoint_deleted): Get jit data from the location's program
	space.
	(jit_breakpoint_re_set_internal): Rename 'inf_data' argument to
	'ps_data', change type.
	(jit_inferior_init, jit_breakpoint_re_set_internal)
	(jit_event_handler): Update.
	(free_objfile_data): Get data from objfile's program space.
	(_initialize_jit): Update.

2013-01-31  Tom Tromey  <[email protected]>

	PR gdb/13987:
	* jit.c (struct jit_inferior_data) <cached_code_address,
	jit_breakpoint>: New fields.
	(jit_breakpoint_re_set_internal): Fix logging.  Only create
	breakpoint if cached address has changed.
	(jit_update_inferior_cache, jit_breakpoint_deleted): New
	functions.
	(_initialize_jit): Register breakpoint deleted observer.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* infrun.c (handle_syscall_event): Remove unused gdbarch.
	(save_infcall_suspend_state): Ifdef out unused inf.
	(restore_infcall_suspend_state): Ifdef out unused inf.
	* jit.c (jit_register_code): Remove unused i, b, inf_data.
	(jit_frame_sniffer): Remove unused inf_data.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* c-exp.y (classify_inner_name): Remove unused type.
	* c-lang.c (c_printstr): Remove unused byte_order, i, things_printed,
	in_quotes, need_comma, wchar_buf, output, cleanup, iter, finished,
	need_escape.
	(c_get_string): Remove unused kind.
	* c-typeprint.c (c_type_print_args): Remove unused i, len, args, table2.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* charset.c (intermediate_encoding): Remove unused i.
	* completer.c (signal_completer): Remove unused i.
	* continuations.c (discard_my_continuations_1): Remove unused
	continuation_ptr.
	* corelow.c (core_close): Remove unuseD name.
	(get_core_siginfo): Remove unused pid.
	* cp-namespace.c (cp_lookup_symbol_imports_or_template): Remove unused
	i, cps.
	* dwarf2loc.c (dwarf2_compile_expr_to_ax): Remove unused base_offset.
	(loclist_describe_location): Remove unused first.
	* event-top.c (command_line_handler): Remove unused got_eof.
	* exec.c (exec_close_1): Remove unused need_symtab_cleanup.
	(resize_section_table): Remove unused old_value.
	* gdb_bfd.c (gdb_bfd_map_section): Remove unused header.
	* gnu-v3-abi.c (compute_vtable_size): Remove unused addr.
	* i386-tdep.c (i386_process_record): Remove unused rex.
	* infcmd.c (get_return_value): Remove unused uiout.
	* jv-lang.c (type_from_class): Remove unused is_array.
	* jv-valprint.c (java_val_print): Remove unused i.
	* linux-nat.c (linux_nat_stop_lwp): Remove unused ptid.
	* linux-thread-db.c (thread_db_find_new_threads_2): Remove unuseD pid.
	* m2-typeprint.c (m2_print_type): Remove unused code.
	* macroexp.c (get_character_constant): Remove unused body_start.
	(macro_stringify): Remove unused result.
	* objc-lang.c (find_methods): Remove unused gdbarch.
	* objfiles.c (filter_overlapping_sections): Remove unused abfd1, abfd2.
	* regcache.c (regcache_cooked_read): Remove unused gdbarch.
	* stack.c (print_frame_args): Remove unused summary.
	* thread.c (thread_apply_command): Remove unused p.
	* valarith.c (value_x_unop): Remove unused mangle_ptr.
	* valops.c (search_struct_method): Remove unused skip.
	* valprint.c (generic_val_print): Remove unused byte_order.
	* varobj.c (varobj_update): Remove unused changed.
	* cli/cli-cmds.c (complete_command): Remove unused next_item.
	(alias_command): Remove unused c.
	* mi/mi-cmd-catch.c (mi_catch_load_unload): Remove unused c.
	* mi/mi-main.c (mi_cmd_data_write_register_values): Remove unused
	format.
	(mi_cmd_data_write_memory): Remove unused word_format.
	(mi_cmd_data_write_memory_bytes): Remove unused r.
	* python/py-gdb-readline.c (gdbpy_readline_wrapper): Remove unused
	p_start, p_end.
	* python/python.c (_initialize_python): Remove unused cmd_name, cmd.
	* tui/tui-disasm.c (tui_set_disassem_content): Remove unused
	line_width.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* dwarf2-frame.c (dwarf2_compile_cfa_to_ax): Remove unused num_regs.
	* symtab.c (iterate_over_symtabs): Remove unused s.
	(find_pc_sect_symtab): Remove unused pspAce.
	(find_pc_sect_line): Remove unused alt_symtab.
	(find_pcs_for_symtab_line): Remove unused ix, previous_function.
	(completion_list_add_name): Remove unused newsize.

2013-01-31  Tom Tromey  <[email protected]>

	PR c++/14998:
	* dwarf2read.c (read_tag_ptr_to_member_type): Handle
	TYPE_CODE_FUNC.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* target.c (target_read_string): Remove unused origlen.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* auto-load.c (auto_load_expand_dir_vars): Remove unused dir_vec.
	* ax-gdb.c (gen_printf): Remove unused expr, i, bot, fr, flen, fmt.
	* ax-general.c (ax_print): Remove unused is_float.
	* blockframe.c (block_innermost_frame): Remove unused start, end.
	* break-catch-sig.c (catch_signal_command): Remove unused gdbarch.

2013-01-31  Aleksandar Ristovski  <[email protected]>

	* solib-svr4.c (svr4_keep_data_in_core): Remove unused lmo.
	(svr4_read_so_list): Remove unused lmo.
	* solib-target.c (solib_target_relocate_section_addresses): Remove
	unused flags.

2013-01-30  Tom Tromey  <[email protected]>

	* hppa-tdep.c (read_unwind_info): Use SECT_OFF_TEXT, not "0".

2013-01-30  Tom Tromey  <[email protected]>

	* symfile.c (get_file_crc): Use bfd_calc_gnu_debuglink_crc32.
	* utils.c (gnu_debuglink_crc32): Remove.
	* utils.h (gnu_debuglink_crc32): Don't declare.

2013-01-30  Tom Tromey  <[email protected]>

	* dwarf2read.c (compute_delayed_physnames, read_call_site_scope)
	(read_structure_type, read_enumeration_type): Remove cast.

2013-01-30  Tom Tromey  <[email protected]>

	* dwarf2read.c (read_namespace_type): Remove cast.
	(read_typedef): Likewise.

2013-01-29  Tom Tromey  <[email protected]>

	* dwarf2read.c (free_dwo_file): Remove assert.

2013-01-29  Tom Tromey  <[email protected]>

	* value.c (deprecated_set_value_modifiable): Remove.
	* value.h (deprecated_set_value_modifiable): Remove.

2013-01-28  Doug Evans  <[email protected]>

	* dwarf2loc.c (dwarf2_find_location_expression): Don't add base address
	to addresses from dwo files.

2013-01-25  Siva Chandra Reddy  <[email protected]>

	* valops.c (find_overload_match): Remove unused argument 'lax'.
	* value.h: Remove unused argument 'lax' from the declaration of
	find_overload_match.
	* eval.c (value_subexp_standard): Do not pass a 'lax' argument
	to find_overload_match.
	* valarith.c (value_user_defined_cpp_op): Do not pass a 'lax'
	argument to find_overload_match.

2013-01-25  Tom Tromey  <[email protected]>

	* dwarf2read.c (processing_has_namespace_info): Remove.
	(struct dwarf2_cu) <processing_has_namespace_info>: New field.
	(process_die, read_func_scope, dwarf2_start_symtab)
	(new_symbol_full): Update.

2013-01-25  Tom Tromey  <[email protected]>

	* cp-namespace.c (cp_set_block_scope): Remove.
	* cp-support.h (cp_set_block_scope): Remove.
	* dbxread.c: Include block.h.
	(cp_set_block_scope): New function.
	(process_one_symbol): Update.
	* dwarf2read.c (read_func_scope): Use block_set_scope.

2013-01-25  Pedro Alves  <[email protected]>

	* remote.c (add_current_inferior_and_thread): Tweak comment.

2013-01-25  Tom Tromey  <[email protected]>

	* cp-namespace.c (cp_scan_for_anonymous_namespaces): Update.
	(cp_add_using_directive): Add 'copy_names' argument.
	* cp-support.h (cp_add_using_directive): Update.
	(struct using_direct) <import_src, import_dest, alias,
	declaration>: Now const.
	* dwarf2read.c (read_import_statement): Use obconcat.
	Don't copy names passed to cp_add_using_directive.

2013-01-25  Tom Tromey  <[email protected]>

	* c-exp.y (qualified_name): Use TYPE_SAFE_NAME.

2013-01-25  Pedro Alves  <[email protected]>

	* remote.c (stop_reply_extract_thread): New.
	(add_current_inferior_and_thread): New parameter 'wait_status'.
	Handle it.
	(remote_start_remote): Pass wait status to
	add_current_inferior_and_thread.
	(extended_remote_run): Update comment.
	(extended_remote_create_inferior_1): Pass wait status to
	add_current_inferior_and_thread.

2013-01-25  Andrew Burgess  <[email protected]>
	    Ulrich Weigand  <[email protected]>

	* valarith.c (value_vector_widen): New function for replicating a
	scalar into a vector.
	(value_binop): Use value_vector_widen to widen scalar to vector
	rather than casting, this better matches gcc C behaviour.
	* valops.c (value_casst): Update logic for casting between vector
	types, and for casting from scalar to vector, try to match gcc C
	behaviour.
	* value.h (value_vector_widen): Declare.
	* opencl-lang.c (opencl_value_cast): New opencl specific casting
	function, handle special case for casting scalar to vector.
	(opencl_relop): Use opencl_value_cast.
	(evaluate_subexp_opencl): Use opencl_value_cast instead of
	value_cast, and handle BINOP_ASSIGN, UNOP_CAST, and UNOP_CAST_TYPE
	in order to use opencl_value_cast.

2013-01-25  Yao Qi  <[email protected]>

	* event-loop.c: Include "queue.h".
	(gdb_event_p): New typedef.
	(DECLARE_QUEUE_P): Use.
	(DEFINE_QUEUE_P): Use.
	(async_queue_event): Remove.
	(gdb_event_xfree): New.
	(initialize_event_loop): New.
	(process_event): Use QUEUE macros.
	(event_queue): Remove.
	(gdb_wait_for_event): Caller update.
	(check_async_event_handlers): Likewise.
	(poll_timers): Likewise.
	* event-loop.h (initialize_event_loop): Declare.
	* event-loop.c (gdb_event_xfree): New.
	* top.c (gdb_init): Call initialize_event_loop.

2013-01-25  Yao Qi  <[email protected]>

	* event-loop.c (async_queue_event): Remove one parameter
	'position'.  Remove code handling 'position' == TAIL.
	(gdb_wait_for_event): Caller update.
	(check_async_event_handlers): Caller update.
	(poll_timers): Caller update.
	* event-loop.h (enum queue_position): Remove.

2013-01-25  Maxim Kuvyrkov  <[email protected]>

	* MAINTAINERS: Update my email.

2013-01-25  Yao Qi  <[email protected]>

	* main.c (print_gdb_help): Remove "--epoch" from the help
	message.

2013-01-24  Ulrich Weigand  <[email protected]>

	* symtab.c (skip_prologue_using_sal): Consider a file
	change the same as an increased line number

2013-01-24  Tiago Stürmer Daitx  <[email protected]>

	* MAINTAINERS (Write After Approval): Add myself to the list. 

2013-01-24  Tom Tromey  <[email protected]>

	* ada-lang.h (ada_decode_symbol): Make return type const.
	* ada-lang.c (ada_decode_symbol): Likewise.

2013-01-23  Doug Evans  <[email protected]>

	* linespec.c (find_linespec_symbols): Make static.

2013-01-23  Tiago Stürmer Daitx  <[email protected]>

	* ppc-sysv-tdep.c (ppc64_sysv_abi_return_value): Set correct
	type on float conversion for complex type.

2013-01-23  Siva Chandra Reddy  <[email protected]>

	Add a new class gdb.Architecture which exposes GDB's
	internal representation of architecture via GDB Python API.
	* Makefile.in: Add entries corresponding to the new file
	python/py-arch.c.
	* NEWS (Python Scripting): Add entries for the new class
	gdb.Architecture and the new method gdb.Frame.architecture.
	* python/py-arch.c: Implement gdb.Architecture class.
	* python/py-frame.c (frapy_arch): Implement the method
	gdb.Frame.architecture().
	(frame_object_methods): Add 'architecture' to the method table.
	* python/python-internal.h: Add declarations of new utility
	functions.
	* python/python.c (_initialize_python): Initialize
	gdb.Architecture class.

2013-01-23  Doug Evans  <[email protected]>

	Work around binutils/15021.
	* dwarf2read.c (dwarf2_per_cu_data): Split imported_symtabs and
	type_unit_group out of union s.  All uses updated.
	(read_index_from_section): Watch for index version 8.
	(follow_die_sig): If using .gdb_index version <= 7, record the TU as
	an imported symtab.
	(write_psymtabs_to_index): Increment version number to 8.

2013-01-22  Pedro Alves  <[email protected]>

	* annotate.c (breakpoint_changed): Skip if breakpoint is not
	user-visible.

2013-01-22  Pedro Alves  <[email protected]>

	* annotate.c (annotate_breakpoints_changed): Rename to ...
	(annotate_breakpoints_invalid): ... this.  Make static.
	(breakpoint_changed): Adjust.
	(_initialize_annotate): Always install the observers.  Install a
	"breakpoint_created" observer.
	* annotate.h (annotate_breakpoints_changed): Delete declaration.
	* breakpoint.c (set_breakpoint_condition)
	(breakpoint_set_commands, do_map_commands_command)
	(init_raw_breakpoint, clear_command, set_ignore_count)
	(enable_breakpoint_disp): No longer call
	annotate_breakpoints_changed.

2013-01-22  Pedro Alves  <[email protected]>

	* annotate.c: Include "inferior.h".
	(frames_invalid_emitted)
	(breakpoints_invalid_emitted): New globals.
	(async_background_execution_p): New function.
	(annotate_breakpoints_changed, annotate_frames_invalid): Skip
	emitting the annotation if it has already been emitted.
	(annotate_display_prompt): New function.
	* annotate.h (annotate_display_prompt): New declaration.
	* event-top.c: Include annotate.h.
	(display_gdb_prompt): Call annotate_display_prompt.

2013-01-22  Pedro Alves  <[email protected]>

	* annotate.c (ignore_count_changed): Delete.
	(annotate_breakpoints_changed): Don't clear ignore_count_changed.
	(annotate_ignore_count_change): Delete.
	(annotate_stopped): Don't emit a delayed breakpoints-changed
	annotation.
	* annotate.h (annotate_ignore_count_change): Delete.
	* breakpoint.c (bpstat_check_breakpoint_conditions): Don't call
	annotate_ignore_count_change.

2013-01-22  Tom Tromey  <[email protected]>

	* dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>: Only
	require_rvalue for a register location.

2013-01-21  Marc Khouzam  <[email protected]>

	* breakpoint.c (print_one_breakpoint_location): Add MI
	field 'thread-groups' when printing a breakpoint.
	(output_thread_groups): New function.

2013-01-21  Siva Chandra Reddy  <[email protected]>

	* python/lib/gdb/commands/explore.py
	(CompoundExplorer.explore_expr): Correct the name of a method
	being invoked.
	(ExploreTypeCommand.invoke): Add a missing 'return'.

2013-01-21  Tom Tromey  <[email protected]>

	* gdb_obstack.h (obconcat): Move declaration here, from...
	* symfile.h (obconcat): ... here.
	* gdb_obstack.c: New file.
	(obconcat): Move from...
	* symfile.c (obconcat): ... here.
	* Makefile.in (SFILES): Add gdb_obstack.c.
	(COMMON_OBS): Add gdb_obstack.o.

2013-01-21  Tom Tromey  <[email protected]>

	* symfile.h (obsavestring): Don't declare.
	* symfile.c (obsavestring): Remove.
	* ada-exp.y: Use obstack_copy0, not obsavestring.
	* ada-lang.c: Use obstack_copy0, not obsavestring.
	* coffread.c: Use obstack_copy0, not obsavestring.
	* cp-namespace.c: Use obstack_copy0, not obsavestring.
	* dbxread.c: Use obstack_copy0, not obsavestring.
	* dwarf2read.c: Use obstack_copy0, not obsavestring.
	* jit.c: Use obstack_copy0, not obsavestring.
	* mdebugread.c: Use obstack_copy0, not obsavestring.
	* psymtab.c: Use obstack_copy0, not obsavestring.
	* stabsread.c: Use obstack_copy0, not obsavestring.
	* xcoffread.c: Use obstack_copy0, not obsavestring.

2013-01-21  Tom Tromey  <[email protected]>

	* dwarf2read.c (fixup_go_packaging): Save package name
	on objfile obstack.
	* gdbtypes.c (init_type): Don't copy name.

2013-01-21  Tom Tromey  <[email protected]>

	* dwarf2read.c (struct partial_die_info) <name, scope>: Now
	const.
	(struct attribute) <u.str>: Now const.
	(struct fnfieldlist) <name>: Now const.
	(dw2_get_file_names_reader, init_cutu_and_read_dies): Update.
	(partial_die_parent_scope): Make return type const.
	(partial_die_full_name, add_partial_symbol): Update.
	(dwarf2_compute_name, dwarf2_full_name, dwarf2_physname): Make
	'name' const.
	(find_file_and_directory): Make 'name' and 'comp_dir' const.
	(read_file_scope, read_func_scope, dwarf2_add_field)
	(dwarf2_add_member_fn, read_structure_type)
	(process_enumeration_scope, read_array_type, read_module_type)
	(read_base_type, read_subrange_type): Update.
	(dwarf2_start_symtab): Make 'name' and 'comp_dir' const.
	(new_symbol_full, guess_full_die_structure_name): Update.
	(dwarf2_canonicalize_name): Return const type.  Make 'name' const.
	(dwarf2_name): Return const type.
	(dwarf_decode_macro_bytes, dwarf_decode_macros): Make 'comp_dir'
	const.

2013-01-21  Tom Tromey  <[email protected]>

	* gdbtypes.c (init_type): Make 'name' const.
	* gdbtypes.h (init_type): Update.

2013-01-21  Tom Tromey  <[email protected]>

	* buildsym.c (patch_subfile_names): Use set_last_source_file.
	(start_symtab): Make 'name' and 'dirname' const.  Use
	set_last_source_file.
	(restart_symtab, reset_symtab_globals): Use set_last_source_file.
	(last_source_file): Define.  Now static.
	(set_last_source_file, get_last_source_file): New functions.
	* buildsym.h (last_source_file): Don't declare.
	(start_symtab): Update.
	(set_last_source_file, get_last_source_file): Declare.
	* coffread.c (complete_symtab): Use set_last_source_file.
	(coff_end_symtab): Likewise.
	(coff_symtab_read): Use set_last_source_file, get_last_source_file.
	* dbxread.c (read_dbx_symtab, read_ofile_symtab): Use
	set_last_source_file.
	(process_one_symbol): Use get_last_source_file.
	* mdebugread.c (parse_partial_symbols): Use set_last_source_file.
	(psymtab_to_symtab_1): Use get_last_source_file.
	* xcoffread.c (process_linenos): Use get_last_source_file.
	(complete_symtab): Use set_last_source_file.
	(read_xcoff_symtab): Use set_last_source_file, get_last_source_file.
	(scan_xcoff_symtab): Use set_last_source_file.

2013-01-21  Tom Tromey  <[email protected]>

	* symtab.c (struct demangled_name_entry) <mangled>: Now const.
	(symbol_set_names): Remove casts.  Handle field const-ness.

2013-01-21  Tom Tromey  <[email protected]>

	* dwarf2read.c (new_symbol_full): Remove cast.
	* symtab.c (symbol_set_demangled_name): Make 'name' const.
	* symtab.h (symbol_set_demangled_name): Update.

2013-01-21  Tom Tromey  <[email protected]>

	* main.c (captured_main): Call bfd_init.

2013-01-21  Tom Tromey  <[email protected]>

	* gnu-v2-abi.c (_initialize_gnu_v2_abi): Don't set default ABI.
	* gnu-v3-abi.c (_initialize_gnu_v3_abi): Set default ABI.
	* minsyms.c (install_minimal_symbols): Don't check for _Z symbols.
	* NEWS: Update.

2013-01-21  Jan Kratochvil  <[email protected]>

	* symmisc.c (maintenance_print_msymbols): Check also ST_DEV.

2013-01-21  Jan Kratochvil  <[email protected]>

	Fix gdb.fortran/common-block.exp crash in PIE mode.
	* dwarf2read.c (new_symbol_full) <DW_TAG_common_block>: Use
	LOC_COMMON_BLOCK.
	* f-valprint.c (info_common_command_for_block): Expect
	LOC_COMMON_BLOCK in gdb_assert.
	* symtab.h (struct general_symbol_info): Update comment for the
	common_block member.
	(domain_enum): Extend comment for the COMMON_BLOCK_DOMAIN member.
	(enum address_class): New member LOC_COMMON_BLOCK.

2013-01-18  David Blaikie  <[email protected]>

	* MAINTAINERS (Write After Approval): Add "David Blaikie".

2013-01-18  Tom Tromey  <[email protected]>

	PR c++/14999:
	* dwarf2loc.c (dwarf2_compile_expr_to_ax) <DW_OP_fbreg>:
	Call require_rvalue.

2013-01-18  Yao Qi  <[email protected]>

	* dbxread.c (dbx_psymtab_to_symtab): Delete the declaration.
	(dbx_read_symtab): New declaration.
	(dbx_psymtab_to_symtab): Delete.
	(dbx_read_symtab): Rename from dbx_psymtab_to_symtab.
	Rename parameter PST to SELF.  Exchanged two parameters.
	(start_psymtab): Caller update.
	* dwarf2read.c (dwarf2_psymtab_to_symtab): Delete the declaration.
	(dwarf2_read_symtab): New declaration.
	(dwarf2_psymtab_to_symtab): Delete.
	(dwarf2_read_symtab): Rename from dwarf2_psymtab_to_symtab.
	Rename parameter PST to SELF.  Exchanged two parameters.
	(create_partial_symtab): Caller update.
	* mdebugread.c (mdebug_psymtab_to_symtab): Delete.
	(mdebug_read_symtab): Rename from mdebug_psymtab_to_symtab.
	Rename parameter PST to SELF.  Exchanged two parameters.
	(parse_partial_symbols, new_psymtab): Caller update.
	* psympriv.h (struct partial_symtab) <read_symtab>: Exchange
	two parameters.
	* psymtab.c (psymtab_to_symtab): Caller update.
	* xcoffread.c (xcoff_psymtab_to_symtab): Delete.
	(xcoff_read_symtab): Rename from xcoff_psymtab_to_symtab.
	Rename parameter PST to SELF.  Exchanged two parameters.
	(xcoff_start_psymtab): Caller update.

2013-01-18  Yao Qi  <[email protected]>

	* infrun.c (proceed): Rename local variable 'oneproc' to
	'force_step'.

2013-01-17  Doug Evans  <[email protected]>

	* dwarf2read.c (dw2_build_type_unit_groups_reader): Delete.
	(dw2_build_type_unit_groups): Delete.  All uses updated.

	* symtab.h (struct symbol_search): Add comment.

2013-01-17  Jan Kratochvil  <[email protected]>

	* symtab.c (compare_filenames_for_search): New comment for
	HAS_DRIVE_SPEC.

2013-01-17  Tom Tromey  <[email protected]>

	* cp-abi.c (cp_abi_completer): Fix typo in assignment.

2013-01-17  Jan Kratochvil  <[email protected]>

	* symtab.c (iterate_over_some_symtabs): New variable cleanups,
	initialize it by existing make_cleanup.  Call new do_cleanups.

2013-01-17  Tom Tromey  <[email protected]>

	* cp-abi.c (cp_abi_completer): New function.
	(_initialize_cp_abi): Set completer for "set cp-abi".

2013-01-17  Tom Tromey  <[email protected]>

	* mem-break.c: Remove obsolete comment.
	* bfin-tdep.c (bfin_breakpoint_from_pc): Fix comment.

2012-01-17  Sanjoy Das <[email protected]>

	* jit.c (jit_reader_load_command): Interpret the jit reader name
	as an absolute path if it begins with a forward slash.

2012-01-17  Sanjoy Das <[email protected]>

	PR gdb/14550

	* jit.c (finalize_symtab): Ensure that only the global block has a
	NULL superblock.

2013-01-17  Pedro Alves  <[email protected]>

	* acinclude.m4: Include ../config/plugins.m4,
	../config/largefile.m4 and ../config/lead-dot.m4.  Add comments.
	* Makefile.in (aclocal_m4_deps): Update.
	* aclocal.m4: Renegerate.

2013-01-16  Doug Evans  <[email protected]>

	* contrib/cc-with-tweaks.sh: Add references to Fission docs.

2013-01-16  Pedro Alves  <[email protected]>
	    Tom Tromey  <[email protected]>

	PR cli/7221:
	* NEWS: Add "catch signal".
	* breakpoint.c (base_breakpoint_ops): No longer static.
	(bpstat_explains_signal): New function.
	(init_catchpoint): No longer static.
	(base_breakpoint_explains_signal): New function.
	(base_breakpoint_ops): Initialize new field.
	* breakpoint.h (enum bpstat_signal_value): New.
	(struct breakpoint_ops) <explains_signal>: New field.
	(bpstat_explains_signal): Remove macro, declare as function.
	(base_breakpoint_ops, init_catchpoint): Declare.
	* break-catch-sig.c: New file.
	* inferior.h (signal_catch_update): Declare.
	* infrun.c (signal_catch): New global.
	(handle_syscall_event): Update for change to
	bpstat_explains_signal.
	(handle_inferior_event): Likewise.  Always handle random signals
	via bpstats.
	(signal_cache_update): Check signal_catch.
	(signal_catch_update): New function.
	(_initialize_infrun): Initialize signal_catch.
	* Makefile.in (SFILES): Add break-catch-sig.c.
	(COMMON_OBS): Add break-catch-sig.o.

2013-01-16  Tom Tromey  <[email protected]>

	* breakpoint.c (print_one_catch_fork, print_one_catch_vfork)
	(print_one_catch_solib, print_one_catch_syscall)
	(print_one_catch_exec, print_one_exception_catchpoint): Emit
	"catch-type".

2013-01-16  Yao Qi  <[email protected]>

	* printcmd.c (current_display_number): Make it static.

2013-01-16  Yao Qi  <[email protected]>

	* infcmd.c (step_once): Don't check '!single_inst' as it was
	checked before.

2013-01-15  Jan Kratochvil  <[email protected]>

	* dwarf2read.c (psymtab_include_file_name): Extend the function comment.

2013-01-14  Tom Tromey  <[email protected]>

	* cli/cli-decode.c (add_setshow_string_noescape_cmd): Return the
	set command.
	* command.h (add_setshow_string_noescape_cmd): Update.
	* corefile.c (set_gnutarget_command): Remove trailing whitespace.
	(complete_set_gnutarget): New function.
	(_initialize_core): Set the "set gnutarget" completer.

2013-01-14  Tom Tromey  <[email protected]>

	PR symtab/14442:
	* c-typeprint.c (cp_type_print_method_args): Handle 'restrict'.
	(c_type_print_modifier): Likewise.
	* dwarf2read.c (read_tag_restrict_type): New function.
	(read_type_die_1): Handle DW_TAG_restrict_type.
	* gdbtypes.c (make_restrict_type): New function.
	(recursive_dump_type): Handle TYPE_RESTRICT.
	* gdbtypes.h (enum type_flag_values): Renumber.
	(enum type_instance_flag_value): Add
	TYPE_INSTANCE_FLAG_RESTRICT.
	(TYPE_RESTRICT): New macro.
	(make_restrict_type): Declare.

2013-01-14  Tom Tromey  <[email protected]>

	PR symtab/14931:
	* psymtab.c (struct psymtab_state): New.
	(discard_psymtabs_upto, make_cleanup_discard_psymtabs): New
	functions.
	* psympriv.h (make_cleanup_discard_psymtabs): Declare.
	* dwarf2read.c (dwarf2_build_psymtabs): Catch exceptions.

2013-01-14  Richard Sharman  <[email protected]>
	    Pedro Alves  <[email protected]>

	PR remote/14786

	* remote.c (remote_threads_info): Make a copy of the reply from
	qfThreadInfo and use that instead of rs->buf.

2013-01-14  Yao Qi  <[email protected]>

	* dbxread.c (dbx_psymtab_to_symtab_1): Don't check PST is NULL.
	(dbx_psymtab_to_symtab): Likewise.
	* dwarf2read.c (dwarf2_psymtab_to_symtab): Likewise.
	* mdebugread.c (mdebug_psymtab_to_symtab): Likewise.
	* xcoffread.c (xcoff_psymtab_to_symtab_1): Likewise.

2013-01-13  Jan Kratochvil  <[email protected]>

	* parse.c (parse_exp_in_context): New variable inner_chain.  Call
	make_cleanup_restore_current_language.  Call set_language.  Move
	OLD_CHAIN and INNER_CHAIN cleanups.
	* utils.c (do_restore_current_language)
	(make_cleanup_restore_current_language): New functions.
	* utils.h (make_cleanup_restore_current_language): New declaration.

2013-01-13  Jan Kratochvil  <[email protected]>

	* source.c (symtab_to_fullname): Apply rewrite_source_path also for
	non-existing files.

	* source.c (symtab_to_fullname): Do not prepend DIRNAME for
	non-existing files if FILENAME is already absolute.

2013-01-11  Jan Kratochvil  <[email protected]>

	* macrocmd.c (macro_inform_no_debuginfo): Use puts_filtered instead of
	fputs_filtered.  Append trailing newline.

2013-01-11  Yao Qi  <[email protected]>
	    Stan Shebs  <[email protected]>

	* psymtab.c (init_psymbol_list): Clarify the comment.

2013-01-11  Yao Qi  <[email protected]>

	* breakpoint.c (print_one_breakpoint_location): Remove dead code.
	(update_dprintf_command_list): Assert that 'printf_line' is
	non-null.  Remove condition check.

2013-01-10  Jan Kratochvil  <[email protected]>

	Code cleanup.
	* psymtab.c (psymtab_to_fullname, psymtab_to_fullname): Make the return
	type const char *.
	* tui/tui-source.c (tui_source_is_displayed): Make the parameter fname
	const char *.
	* tui/tui-source.h (tui_source_is_displayed): Likewise.

2013-01-09  Anthony Green  <[email protected]>

	* cp-abi.c (cplus_print_vtable): Don't return value from void
	function.
	* ada-lang.c (re_set_catch_assert): Ditto.

2013-01-09  Doug Evans  <[email protected]>

	* symfile.h (quick_symbol_functions): Delete member
	pre_expand_symtabs_matching.  All uses removed.
	* dwarf2read.c (dw2_lookup_symbol): Implement.
	(dw2_do_expand_symtabs_matching): Delete.
	(dw2_pre_expand_symtabs_matching): Delete.
	(struct dw2_symtab_iterator): New type.
	(dw2_symtab_iter_init, dw2_symtab_iter_next): New functions.
	(dw2_expand_symtabs_for_function): Rewrite.
	(dwarf2_gdb_index_functions): Update.
	* psymtab.c (pre_expand_symtabs_matching_psymtabs): Delete.
	(psym_functions): Update.

2013-01-09  Tom Tromey  <[email protected]>

	* config/pa/hpux.mh (NATDEPFILES): Remove somread.o.
	* configure: Rebuild.
	* configure.ac: Add somread.o to the build if BFD has SOM
	support.
	* somread.c: Include som/aout.h, not syms.h.
	(som_symtab_read): Use som_external_symbol_dictionary_record.
	Unpack records manually.
	(_initialize_somread): Declare.

2012-01-08  Mike Frysinger  <[email protected]>

	* common/linux-ptrace.c (linux_ptrace_test_ret_to_nx) [__x86_64__]:
	Cast return_address to 64bits.

2013-01-08  Hui Zhu  <[email protected]>

	* printcmd.c: Remove define of function output_command.
	* tracepoint.c: Remove extern of function output_command.
	* valprint.h: (output_command): New extern.

2013-01-07  Tom Tromey  <[email protected]>

	* objc-lang.c (objc_emit_char, objc_printchar, objc_printstr):
	Remove.
	(objc_language_defn): Use c_printchar, c_printstr,
	c_emit_char.

2013-01-07  Tom Tromey  <[email protected]>

	PR cli/7719:
	* NEWS: Update.
	* ada-valprint.c (printstr, print_field_values): Remove
	"inspect_it" code.
	* cp-valprint.c (cp_print_value_fields): Remove "inspect_it"
	code.
	* jv-valprint.c (java_print_value_fields): Remove "inspect_it"
	code.
	* m2-lang.c (m2_printstr): Remove "inspect_it" code.
	* main.c (captured_main): Remove "epoch" argument.
	* objc-lang.c (objc_printstr): Remove "inspect_it" code.
	* p-lang.c (pascal_printstr): Remove "inspect_it" code.
	* p-valprint.c (pascal_object_print_value_fields): Remove
	"inspect_it" code.
	* printcmd.c (print_command_1): Remove 'inspect' argument.
	(print_command, call_command): Update.
	(inspect_command): Remove.
	(_initialize_printcmd): Make "inspect" an alias for "print".
	* top.c (epoch_interface): Remove.
	* top.h (epoch_interface): Remove.
	* valprint.c (user_print_options): Update.
	(print_converted_chars_to_obstack): Remove "inspect_it" code.
	* valprint.h (struct value_print_options) <inspect_it>: Remove
	field.

2013-01-04  Tom Tromey  <[email protected]>

	* valprint.h (read_string): Add 'extern'.

2013-01-07  Joel Brobecker  <[email protected]>

	* darwin-nat.c: Fix typo in TASK_DYLD_INFO_COUNT macro test
	used to decide whether to define darwin_read_dyld_info or not.

2013-01-03  Pierre Muller  <[email protected]>

	* main.c (relocate_gdb_directory): Avoid calling stat function
	if DIR is empty.

2013-01-03  Yao Qi  <[email protected]>

	* psymtab.c (fixup_psymbol_section): Update declaration.
	(fixup_psymbol_section): Remove code returning value.

2013-01-03  Yao Qi  <[email protected]>

	* symtab.h: Remove some out of date comments.
	 (enum exception_event_kind): Move it ...
	* breakpoint.c: ... here.

2013-01-02  Iain Sandoe  <[email protected]>

	PR gdb/14405
	* darwin-nat.c (darwin_read_dyld_info): Only build if
	TASK_DYLD_INFO_COUNT is defined.
	(darwin_xfer_partial): Call darwin_read_dyld_info only if
	TASK_DYLD_INFO_COUNT is defined.

2013-01-02  Tom Tromey  <[email protected]>

	* symfile.h (struct ecoff_debug_hack): Remove.
	* objfiles.c: Don't include mdebugread.h.

2013-01-02  Tom Tromey  <[email protected]>

	* config/i386/darwin.mh (NATDEPFILES): Remove machoread.o.
	* configure.ac: Check for Mach-O support in BFD.  Update
	CONFIG_OBS.
	* configure: Rebuild.

2013-01-02  Tom Tromey  <[email protected]>

	* acinclude.m4 (GDB_AC_CHECK_BFD): New macro.
	* configure.ac: Use GDB_AC_CHECK_BFD.
	* configure: Rebuild.

2013-01-01  Maxim Kuvyrkov  <[email protected]>

	* MAINTAINERS: Update my email.

2013-01-01  Joel Brobecker  <[email protected]>

	* cli/cli-script.h (make_cleanup_free_command_lines): Make extern.

2013-01-01  Joel Brobecker  <[email protected]>

	* rs6000-nat.c (bss_data_overlap): New function.
	(vmap_symtab): Use it to adjust the .bss section's offset.

2013-01-01  Joel Brobecker  <[email protected]>

	Update year range in copyright notice of all files.

2013-01-01, 13  Joel Brobecker  <[email protected]>

	* top.c (print_gdb_version): Update copyright year.

For older changes see ChangeLog-2012.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: