* testsuite/script_test_3.t: Add a TLS segment.

[binutils.git] / gdb / ChangeLog

2010-03-24  Pedro Alves  <[email protected]>

	* remote.c (crc32): Constify `buf' parameter.
	(remote_verify_memory): New, abstracted out from...
	(compare_sections_command): ... this.  Remove hardcoded target
	checks.
	(init_remote_ops): Install remote_verify_memory.
	* target.c (target_verify_memory): New.
	* target.h (struct target_ops) <to_verify_memory>: New field.
	(target_verify_memory): Declare.

2010-03-24  Vladimir Prus  <[email protected]>

	Implement -trace-save.

	* mi-cmds.h (mi_cmds_trace_save): Declare.
	* mi-cmds.c (mi_cmds): Register -trace-save.
	* mi/mi-main.c (mi_cmd_trace_save): New.
	* remote.c (remote_save_trace_data): Take const parameter.
	* target.h (struct target_ops::to_save_trace_data): Take
	const parameter.
	* target.c (update_current_target): Adjust to the above.
	* tracepoint.c (trave_save): New, extracted from
	(trace_save_command): ...this.
	(tfile_trace_find): Remove message that is unnecessary now
	that 'tfind' reports found frame.
	* tracepoint.h (trace_save): Declare.

2010-03-24  Vladimir Prus  <[email protected]>

	Implement -trace-find.

	* mi/mi-cmds.c (mi_cmds): Register -trace-find.
	* mi/mi-cmds.h (mi_cmd_trace_find): Declare.
	* mi/mi-main.c (mi_cmd_trace_find): New.
	* target.h (struct target_ops): Document to_trace_find.
	* tracepoint.h (tfind_1): Declare.
	* tracepoint.c (finish_tfind_command): Rename to...
	(tfind_1): ...this.
	* remote.c (remote_trace_find): Return -1 if target say
	there's no frame.  Improve error diagnostics.

2010-03-24  Vladimir Prus  <[email protected]>

	-trace-define-variable and -trace-list-variables.

	* tracepoint.c (create_trace_state_variable): Make
	private copy of name, as opposed to assuming the
	pointer lives forever.
	(tvariables_info_1): New.
	(tvariables_info): Use the above.
	* tracepoint.h (create_trace_state_variable, tvariables_info_1):
	Declare.
	* mi/mi-cmds.c (mi_cmds): Register -trace-define-variable
	and -trace-list-variables.
	* mi/mi-cmds.h (mi_cmd_trace_define_variable)
	(mi_cmd_trace_list_variables): New.
	* mi/mi-main.c (mi_cmd_trace_define_variable)
	(mi_cmd_trace_list_variables): New.

2010-03-24  Vladimir Prus  <[email protected]>

	Implement -break-passcount.

	* mi/mi-cmd-break.c (mi_cmd_break_passcount): New.
	* mi/mi-cmds.c (mi_cmds): Register -break-passcount.
	* mi/mi-cmds.h (mi_cmd_break_passcount): Declare.

2010-03-24  Vladimir Prus  <[email protected]>

	-trace-start/-trace-end/-trace-status.

	* mi/mi-cmds.c (mi_cmds): Register -trace-start, -trace-status
	and -trace-stop.
	* mi/mi-cmds.h (mi_cmd_trace_start, mi_cmd_trace_status)
	(mi_cmd_trace_stop): Declare.
	* mi/mi-main.c (mi_cmd_trace_start, mi_cmd_trace_status)
	(mi_cmd_trace_stop): New.
	* tracepoint.c (start_tracing): New, extracted from...
	(trace_start_command): ...this.
	(trace_status_mi): New.
	* tracepoint.h (struct trace_status): Document
	stopping_tracepoint.
	(start_tracing, stop_tracing, trace_status_mi): Declare.

2010-03-24  Vladimir Prus  <[email protected]>

	Implement creating tracepoints with -break-insert.

	* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle -a
	to mean that tracepoint should be created.

2010-03-24  Vladimir Prus  <[email protected]>

	* breakpoint.c (check_no_tracepoint_commands): Use
	current spelling of 'teval'.

2010-03-24  Vladimir Prus  <[email protected]>

	Unify actions and commands

	* defs.h (read_command_lines, read_command_lines_1): New
	parameters validator and closure.
	* tracepoint.h (struct action_line): Remove.
	* breakpoint.h (struct breakpoint): Remove the 'actions'
	field.
	* defs.h (enum command_control_type): New value
	while_stepping_control.
	(struct command_line): Add comments.
	* breakpoint.c (breakoint_is_tracepoint): New.
	(breakpoint_set_commands): For tracepoints,
	verify the commands are permissible.
	(check_tracepoint_commands): New.
	(commands_command): Require that each new line is validated using
	check_tracepoint_command, if we set commands for a tracepoint.
	(create_tracepoint_from_upload): Likewise.
	(print_one_breakpoint_location): Remove the code to print
	actions specifically.
	(tracepoint_save_command): Relay to print_command_lines.
	* cli/cli-script.c (process_next_line): New parameters validator
	and closure. Handle 'while-stepping'. Call validator if not null.
	(read_command_lines, read_command_lines1): Likewise.
	(recurse_read_control_structure): New parameters validator and
	closure. Handle while_stepping_control.
	(print_command_lines): Handle while-stepping.
	(get_command_line, define_command, document_command): Adjust.
	* remote.c (remote_download_tracepoint): Adjust.
	* tracepoint.c (make_cleanup_free_actions, read_actions)
	(free_actions, do_free_actions_cleanup): Remove.
	(trace_actions_command): Use read_command_lines.
	(validate_actionline): Use error in one place.
	(encode_actions_1): New, extracted from...
	(encode_actions): ...this. Also use cleanups for exception
	safety.
	(trace_dump_command): Adjust.
	* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
	it's tracepoint.

2010-03-23  Mike Frysinger  <[email protected]>

	* Makefile.in (OPCODES_CFLAGS): Add -I$(OPCODES_SRC)/..

2010-03-22  Stan Shebs  <[email protected]>

	* value.c (value_static_field): Be lazy about the field's value.

2010-03-22  Reid Kleckner  <[email protected]>

	PR gdb/11094
	* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add
	bp_jit_event.
	(disable_breakpoints_in_shlibs): Likewise.

2010-03-22  Ulrich Weigand  <[email protected]>

	* dwarf2read.c (partial_die_parent_scope): Work around buggy
	GCC 4.1 debug info generation (GCC PR c++/28460).
	(determine_prefix): Likewise.

2010-03-20  Daniel Jacobowitz  <[email protected]>

	* tui/tui-disasm.c (tui_get_begin_asm_address): Default to
	get_current_arch.
	* tui/tui-layout.c (extract_display_start_addr): Likewise.

2010-03-19  Stan Shebs  <[email protected]>

	* ax-gdb.c (gen_fetch): Handle bool.
	(gen_usual_unary): Ditto.
	(gen_cast): Ditto.
	(gen_equal): New function.
	(gen_less): New function.
	(gen_expr_binop_rest): Call them, also return integer type from
	logical operations.
	(gen_expr): Ditto.

2010-03-19  Tom Tromey  <[email protected]>

	* jv-lang.c (jv_dynamics_objfile_data_key)
	(jv_type_objfile_data_key): New globals.
	(class_symtab): Move earlier.
	(jv_per_objfile_free): New function.
	(get_dynamics_objfile): Call set_objfile_data.  Add 'gdbarch'
	parameter.
	Remove ancient #if 1.
	(add_class_symbol): Remove redundant declaration.
	(java_lookup_class): Use alloc_type, not alloc_type_arch.
	(java_link_class_type): Mark as static.  Update.
	(jv_clear_object_type): New function.
	(set_java_object_type): Likewise.
	(get_java_object_type): Use set_java_object_type.
	(is_object_type): Likewise.
	(_initialize_java_language): Register new objfile keys.
	(get_java_class_symtab): Add 'gdbarch' parameter.
	(add_class_symtab_symbol): Update.
	(type_from_class): Update.

2010-03-19  Stan Shebs  <[email protected]>

	* ax-general.c (ax_const_l): Fix a sizing bug. 

2010-03-18  Joel Brobecker  <[email protected]>

	GDB 7.1 released.

2010-03-18  Stan Shebs  <[email protected]>
	    Pedro Alves  <[email protected]>

	* target.h (struct target_ops): New method
	to_set_circular_trace_buffer.
	(target_set_circular_trace_buffer): New macro.
	* target.c (update_current_target): Add
	to_set_circular_trace_buffer, fix to_set_disconnected_tracing
	default behavior.
	* remote.c (remote_set_circular_trace_buffer): New function.
	(init_remote_ops): Add it to vector.
	* tracepoint.h (struct trace_status): New field traceframes_created,
	change buffer_size and buffer_free to int.
	* tracepoint.c (circular_trace_buffer): New global.
	(start_tracing): Send values of disconnected tracing and circular
	trace buffer settings.
	(set_circular_trace_buffer): New function.
	(parse_trace_state): Handle total space and frames created.
	(trace_status_command): Display total space and total frames
	created.
	(trace_save): Write out new status values.
	(parse_trace_status): Set traceframe_count, traceframes_created,
	buffer_free and buffer_size to -1 by default.
	(_initialize_tracepoint): New setshow for circular-trace-buffer.
	* NEWS: Mention the circular trace buffer option.

2010-03-18  Tom Tromey  <[email protected]>

	* infcmd.c (finish_command_continuation): Wrap print_return_value
	in TRY_CATCH.

2010-03-18  Joel Brobecker  <[email protected]>

	* dwarf2read.c (add_partial_subprogram): Make sure the subprogram
	DIE has a name before creating the associated partial symbol.
	(read_func_scope): Emit a complaint if the subprogram does not
	have a name or when we can't extract the subprogram PC bounds.

2010-03-18  Ulrich Weigand  <[email protected]>

	* mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch
	instead of selected frame architecture.

2010-03-18  Pedro Alves  <[email protected]>

	* infcmd.c (until_command): Use ERROR_NO_INFERIOR.  Ensure there's
	a valid selected thread, and that it is not running.
	(advance_command): Ditto.
	(finish_command): Ditto.

2010-03-17 Stan Shebs  <[email protected]>

	* ax-gdb.c (require_rvalue): Disallow non-scalars.

	* infcall.c: Include tracepoint.h.
	(call_function_by_hand): Disallow calls in tfind mode.
	* infcmd.c: Include tracepoint.h.
	(ensure_not_tfind_mode): New function.
	(continue_1): Call it.
	(step_1) Ditto.
	(jump_command): Ditto.
	(signal_command): Ditto.
	(advance_command): Ditto.
	(until_command): Ditto.
	(finish_command): Ditto.
	* tracepoint.h (disconnect_or_stop_tracing): Declare.

	* ax-gdb.h (struct axs_value): New field optimized_out.
	(gen_trace_for_var): Add gdbarch argument.
	* ax-gdb.c (gen_trace_static_fields): New function.
	(gen_traced_pop): Call it, add gdbarch argument.
	(gen_trace_for_expr): Update call to it.
	(gen_trace_for_var): Ditto, and report optimized-out variables.
	(gen_struct_ref_recursive): Check for optimized-out value.
	(gen_struct_elt_for_reference): Ditto.
	(gen_static_field): Pass gdbarch instead of expression, assume
	optimization if field not found.
	(gen_var_ref): Set the optimized_out flag.
	(gen_expr): Error on optimized-out variable.
	* tracepoint.c (collect_symbol): Handle struct-valued vars as
	expressions, skip optimized-out variables with computed locations.
	* dwarf2loc.c (dwarf2_tracepoint_var_ref): Flag instead of
	erroring out if location expression missing.
	(loclist_tracepoint_var_ref): Don't error out here.

2010-03-17  Tom Tromey  <[email protected]>

	* dwarf2read.c (dwarf2_get_section_info): Handle case where no
	DWARF data is available.

2010-03-17  Daniel Jacobowitz  <[email protected]>

	* symfile.c (generic_load): Reset breakpoints after loading.

2010-03-17  Tom Tromey  <[email protected]>

	* linux-nat.c (linux_nat_detach): Check debug_linux_nat.

2010-03-17  Jan Kratochvil  <[email protected]>

	* spu-tdep.c (spu_catch_start): Replace set_breakpoint call with the
	create_breakpoint call, adjust the parameters.

2010-03-16  Jan Kratochvil  <[email protected]>
	    Chandru <[email protected]>

	* dwarf2read.c (read_subrange_type): Set TYPE_HIGH_BOUND_UNDEFINED.
	* valarith.c (value_subscripted_rvalue): Suppress error if
	TYPE_ARRAY_UPPER_BOUND_IS_UNDEFINED.

2010-03-16  Holger Hans Peter Freyther  <[email protected]>

	* linux-record.c (record_linux_msghdr): Remove unintended semicolons.

2010-03-16  Joel Brobecker  <[email protected]>

	* ada-tasks.c (task_command_1): Check that the task ptid is valid
	before doing the associated thread switch.

2010-03-16  Daniel Jacobowitz  <[email protected]>

	* MAINTAINERS: Update my email address.

2010-03-16  Vladimir Prus  <[email protected]>

	Simplify MI breakpoint setting.

	* breakpoint.c (break_command_really): Make nonstatic and
	rename to...
	(create_breakpoint): ...this. Rename prior function by this name
	to...
	(create_breakpoint_sal): ...this.
	(create_breakpoints): Rename to...
	(create_breakpoints_sal): ...this.
	(set_breakpoint): Remove.
	* breakpoint.h: Adjust to above changes.
	* mi/mi-cmd-break.c (mi_cmd_break_insert): Simplify.

2010-03-15 Stan Shebs  <[email protected]>

	* ax-gdb.c: Include cp-support.h.
	(find_field): Remove.
	(gen_primitive_field): New function.
	(gen_struct_ref_recursive): New function.
	(gen_struct_ref): Rewrite to call gen_struct_ref_recursive instead
	of find_field.
	(gen_static_field): New function.
	(gen_struct_elt_for_reference): New.
	(gen_namespace_elt): New.
	(gen_maybe_namespace_elt): New.
	(gen_aggregate_elt_ref): New.
	(gen_expr): Add OP_SCOPE, display opcode name in error message.

2010-03-15  Tom Tromey  <[email protected]>

	* dwarf2read.c (die_needs_namespace): Also return 0 for
	DW_TAG_subprogram.

2010-03-15  Sami Wagiaalla  <[email protected]>

	PR c++/7936:
	* cp-support.h: Added char *declaration element to using_direct
	data struct.
	(cp_add_using): Added char *declaration argument.
	(cp_add_using_directive): Ditto.
	(cp_lookup_symbol_imports): made extern.
	* cp-namespace.c: Updated with the above changes.
	* dwarf2read.c (read_import_statement): Ditto.
	(read_namespace): Ditto.
	(read_import_statement): Support import declarations.
	* cp-namespace.c (cp_lookup_symbol_imports): Check for imported
	declarations.
	Added support for 'declaration_only' search.
	(cp_lookup_symbol_namespace): Attempt to search for the name as
	is before consideration of imports.
	* symtab.c (lookup_symbol_aux_local): Added a 'declaration_only'
	search at every block level search.
	Now takes language argument.
	(lookup_symbol_aux): Updated.

2010-03-15  Tom Tromey  <[email protected]>

	* c-exp.y (name_not_typename): Add 'operator' clause.

2010-03-15  Ralf Corsepius  <[email protected]>  (tiny change)

	* configure.ac: Exit if ${gdb_target_obs}" is not set.
	* configure: Regenerate.

2010-03-15  Jan Kratochvil  <[email protected]>

	* symfile.c (addr_info_make_relative): Ignore also missing ".dynbss"
	and ".sdynbss".  Update the comment.

2010-03-15  Jie Zhang  <[email protected]>

	* MAINTAINERS: Update my email address.

2010-03-14  Daniel Jacobowitz  <[email protected]>

	* gdbtypes.h (TYPE_IS_OPAQUE): Correct HAVE_CPLUS_STRUCT check.

2010-03-14  Daniel Jacobowitz  <[email protected]>

	* charset.c [USE_WIN32API]: Include <windows.h>.
	 (_initialize_charset): Correct type of w32_host_default_charset.

2010-03-14  Pedro Alves  <[email protected]>

	* infrun.c (ptid_match): Don't assert that PTID is not a pid ptid.

2010-03-12  Tom Tromey  <[email protected]>

	PR c++/9708:
	* dwarf2read.c (die_needs_namespace) <DW_TAG_variable>: A variable
	in a lexical block does not need a namespace.
	(new_symbol) <DW_TAG_variable>: Put extern variables on
	list_in_scope in all cases.

2010-03-12 Stan Shebs  <[email protected]>

	* ax-gdb.c (gen_expr): Add shift expressions.
	(gen_expr_binop_rest): Ditto.

2010-03-12  Sami Wagiaalla  <[email protected]>

	* buildsym.c (finish_block): Reset using_directives pointer
	after block initialization.

2010-03-12  H.J. Lu  <[email protected]>

	* amd64-tdep.c (amd64_word_names): Replace "sp" with "".
	* i386-tdep.c (i386_word_names): Likewise.

2010-03-12  Pedro Alves  <[email protected]>

	* target.c (memory_xfer_partial): Don't use the stack cache if
	inspecting trace frames.
	* tracepoint.c (finish_tfind_command): Invalidate the target
	dcache.

2010-03-11  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (LM_ADDR_CHECK) <info_verbose>: Use printf_unfiltered
	for the PIC displacement, print also the displacement value.
	(svr4_exec_displacement):  Print DISPLACEMENT if INFO_VERBOSE.

2010-03-10  Kevin Buettner  <[email protected]>

	* remote-mips.c (close_ports, mips_initialize_cleanups)
	(mips_exit_cleanups, mips_send_command, mips_open, pmon_open)
	(ddb_open, lsi_open, mips_remove_breakpoint, mips_remove_watchpoint)
	(mips_stopped_by_watchpoint, send_srec, pmon_checkset)
	(pmon_make_fastrec, pmon_check_ack, mips_expect_download)
	(pmon_check_entry_address, pmon_check_total, pmon_end_download)
	(pmon_download, pmon_load_fast, _initialize_remote_mips): Add
	comments describing each of these functions.
	(mips_enter_debug, mips_exit_debug, common_open)
	(mips_signal_from_protocol, pmon_makeb64, pmon_zeroset): Add
	blank line after the comment describing the function.

2010-03-10  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (svr4_exec_displacement): Return now success, new
	parameter displacementp.  Update comment.
	(svr4_relocate_main_executable): Return if non-zero SECTION_OFFSETS
	element exists.  Return if svr4_exec_displacement was not successful.
	Update comment.

2010-03-10  Jan Kratochvil  <[email protected]>
	    Daniel Jacobowitz  <[email protected]>

	* solib-svr4.c (read_program_header): Support type == -1 to read
	all program headers.
	(read_program_headers_from_bfd): New function.
	(svr4_static_exec_displacement): Remove and move the comment ...
	(svr4_exec_displacement): ... here.  Remove variable found.  New
	variable displacement.  Check also DYNAMIC.  Verify DISPLACEMENT
	alignment for ELF targets.  Compare target vs. exec_bfd PHDRs for ELF
	targets using read_program_headers_from_bfd.  Remove the call of
	svr4_static_exec_displacement.

2010-03-10  Tom Tromey  <[email protected]>

	* dwarf2read.c (struct pubnames_header): Remove.
	(_PUBNAMES_HEADER): Remove.
	(_ACTUAL_PUBNAMES_HEADER_SIZE): Remove.
	(struct aranges_header): Remove.
	(_ARANGES_HEADER, _ACTUAL_ARANGES_HEADER_SIZE): Remove.
	(struct dwarf2_per_objfile) <pubnames, aranges>: Remove.
	(PUBNAMES_SECTION): Remove.
	(ARANGES_SECTION): Remove.
	(dwarf2_locate_sections): Don't handle pubnames or aranges.
	(dwarf2_build_psymtabs): Remove dead code.
	(dwarf2_build_psymtabs_easy): Remove.

2010-03-10  Tom Tromey  <[email protected]>

	* elfread.c (elf_symfile_read): Don't call
	dwarf2_build_frame_info.
	* dwarf2read.c (struct dwarf2_section_info) <readin>: New field.
	(struct dwarf2_per_objfile) <objfile>: New field.
	(dwarf2_has_info): Now idempotent.  Set objfile field.
	(dwarf2_read_section): Check and set readin field.  Call
	posix_madvise.
	(dwarf2_build_psymtabs): Don't read all sections.
	(read_type_comp_unit_head): Read types section.
	(create_debug_types_hash_table): Likewise.
	(init_cu_die_reader): Add asserts.
	(process_type_comp_unit): Add assert.
	(dwarf2_build_psymtabs_hard): Read info section.
	(load_partial_comp_unit): Add assert.
	(create_all_comp_units): Read info section.
	(load_full_comp_unit): Likewise.
	(dwarf2_ranges_read): Read ranges section.
	(dwarf2_record_block_ranges): Add assert.
	(dwarf2_read_abbrevs): Read abbrev section.
	(read_indirect_string): Read str section.
	(dwarf_decode_line_header): Read line section.
	(read_signatured_type_at_offset): Read types section.
	(dwarf_decode_macros): Read macinfo section.
	(dwarf2_symbol_mark_computed): Read loc section.
	* dwarf2-frame.c (dwarf2_frame_find_fde): Call
	dwarf2_build_frame_info.
	(dwarf2_build_frame_info): Unconditionally set
	dwarf2_frame_objfile_data on the objfile.
	* configure.ac: Check for posix_madvise.
	* config.in, configure: Rebuild.

2010-03-10  Tom Tromey  <[email protected]>

	* xcoffread.c (xcoff_start_psymtab): Update.
	(xcoff_end_psymtab): Update.
	* psymtab.c (allocate_psymtab): Remove dead code.
	* psympriv.h (struct partial_symtab) <read_symtab_private>: Now
	void*.
	* mdebugread.c (parse_partial_symbols): Update.
	(new_psymtab): Likewise.
	* dwarf2read.c (process_psymtab_comp_unit): Update.
	(psymtab_to_symtab_1): Update.
	* dbxread.c (start_psymtab): Update.
	(end_psymtab): Likewise.

2010-03-10  Tom Tromey  <[email protected]>

	* xcoffread.c: Include psymtab.h.
	(xcoff_sym_fns): Update.
	* symtab.h (struct partial_symbol): Remove.
	(PSYMBOL_DOMAIN, PSYMBOL_CLASS): Remove.
	(struct partial_symtab): Remove.
	(PSYMTAB_TO_SYMTAB): Remove.
	(lookup_partial_symbol, lookup_partial_symtab, find_pc_psymtab)
	(find_pc_sect_psymtab): Remove.
	(find_pc_sect_symtab_via_partial): Declare.
	(find_pc_psymtab, find_pc_sect_psymbol, psymtab_to_symtab)
	(find_main_psymtab): Remove.
	(find_main_filename): Declare.
	(fixup_psymbol_section): Remove.
	(fixup_section): Declare.
	* symtab.c: Include psymtab.h.
	(lookup_symtab): Use lookup_symtab method.
	(lookup_partial_symtab): Remove.
	(find_pc_sect_psymtab_closer): Remove.
	(find_pc_sect_psymtab): Remove.
	(find_pc_sect_symtab_via_partial): New function.
	(find_pc_psymtab, find_pc_sect_psymbol, find_pc_psymbol): Remove.
	(fixup_section): No longer static.
	(fixup_psymbol_section): Remove.
	(lookup_symbol_aux): Use lookup_symbol_aux_quick.
	(lookup_global_symbol_from_objfile): Likewise.
	(lookup_symbol_aux_psymtabs): Remove.
	(lookup_symbol_aux_quick): New function.
	(lookup_symbol_global): Use lookup_symbol_aux_quick.
	(lookup_partial_symbol): Remove.
	(basic_lookup_transparent_type_quick): New function.
	(basic_lookup_transparent_type): Use it.
	(find_main_psymtab): Remove.
	(find_main_filename): New function.
	(find_pc_sect_symtab): Use find_pc_sect_symtab method.
	(find_line_symtab): Use expand_symtabs_with_filename method.
	(output_partial_symbol_filename): New function.
	(sources_info): Use map_partial_symbol_filenames.
	(struct search_symbols_data): New type.
	(search_symbols_file_matches): New function.
	(search_symbols_name_matches): Likewise.
	(search_symbols): Use expand_symtabs_matching method.
	(struct add_name_data): Rename from add_macro_name_data.
	(add_macro_name): Update.
	(add_partial_symbol_name): New function.
	(default_make_symbol_completion_list): Use
	map_partial_symbol_names.
	(struct add_partial_symbol_name): New type.
	(maybe_add_partial_symtab_filename): New function.
	(make_source_files_completion_list): Use
	map_partial_symbol_filenames.
	(expand_line_sal): Use expand_symtabs_with_filename method.
	* symmisc.c: Include psymtab.h.
	(print_objfile_statistics): Use print_stats method.
	(dump_objfile): Use dump method.
	(dump_psymtab, maintenance_print_psymbols)
	(maintenance_info_psymtabs, maintenance_check_symtabs)
	(extend_psymbol_list): Remove.
	* symfile.h (struct quick_symbol_functions): New struct.
	(struct sym_fns) <qf>: New field.
	(sort_pst_symbols): Remove.
	(increment_reading_symtab): Declare.
	* symfile.c: Include psymtab.h.
	(compare_psymbols, sort_pst_symbols): Remove.
	(psymtab_to_symtab): Remove.
	(increment_reading_symtab): New function.
	(symbol_file_add_with_addrs_or_offsets): Use expand_all_symtabs
	method.
	(set_initial_language): Use find_main_filename.
	(allocate_psymtab, discard_psymtab, cashier_psymtab): Remove.
	(free_named_symtabs): Remove unused code.
	(start_psymtab_common, add_psymbol_to_bcache)
	(append_psymbol_to_list, add_psymbol_to_list, init_psymbol_list):
	Remove.
	* stack.c: Include psymtab.h, symfile.h.
	(backtrace_command_1): Use find_pc_sect_symtab_via_partial.
	* source.h (psymtab_to_fullname): Don't declare.
	* source.c: Include psymtab.h.
	(select_source_symtab): Use find_last_source_symtab method.
	(forget_cached_source_info): Use forget_cached_source_info
	method.
	(find_and_open_source): No longer static.
	(psymtab_to_fullname): Remove.
	* somread.c: Include psymtab.h.
	(som_sym_fns): Update.
	* psympriv.h: New file.
	* psymtab.h: New file.
	* psymtab.c: New file.
	* objfiles.h: (ALL_OBJFILE_PSYMTABS): Remove.
	(ALL_PSYMTABS, ALL_PSPACE_PSYMTABS): Likewise.
	* objfiles.c: Include psymtab.h.
	(objfile_relocate1): Use relocate method.
	(objfile_has_partial_symbols): Use has_symbols method.
	* mipsread.c: Include psymtab.h.
	(ecoff_sym_fns): Update.
	* mi/mi-cmd-file.c: Include psymtab.h.
	(print_partial_file_name): New function.
	(mi_cmd_file_list_exec_source_files): Use
	map_partial_symbol_filenames.
	* mdebugread.c: Include psympriv.h.
	* machoread.c: Include psympriv.h.
	(macho_sym_fns): Update.
	* m2-exp.y (yylex): Use lookup_symtab.
	* elfread.c: Include psympriv.h.
	(elf_sym_fns): Update.
	* dwarf2read.c: Include psympriv.h.
	* dbxread.c: Include psympriv.h.
	(aout_sym_fns): Update.
	* cp-support.c: Include psymtab.h.
	(read_in_psymtabs): Remove.
	(make_symbol_overload_list_qualified): Use
	expand_symtabs_for_function method.
	* coffread.c: Include psympriv.h.
	(coff_sym_fns): Update.
	* blockframe.c: Include psymtab.h.
	(find_pc_partial_function): Use find_pc_sect_symtab method.
	* ada-lang.h (ada_update_initial_language): Update.
	* ada-lang.c: Include psymtab.h.
	(ada_update_initial_language): Remove 'main_pst' argument.
	(ada_lookup_partial_symbol): Remove.
	(struct ada_psym_data): New type.
	(ada_add_psyms): New function.
	(ada_add_non_local_symbols): Use map_ada_symtabs method.
	(struct add_partial_datum): New type.
	(ada_add_partial_symbol_completions): New function.
	(ada_make_symbol_completion_list): Use map_partial_symbol_names.
	(ada_exception_support_info_sniffer): Update.
	* Makefile.in (SFILES): Add psymtab.c.
	(COMMON_OBS): Add psymtab.o.
	(HFILES_NO_SRCDIR): Add psymtab.h, psympriv.h.

2010-03-10  Pierre Muller  <[email protected]>

	* remote-fileio.c (cygwin_conv_path): Define macro for old cygwin API.

2010-03-10  Sami Wagiaalla  <[email protected]>

	PR C++/11236:
	* cp-namespace.c (cp_add_using): Deleted.
	(cp_add_using_directive): Use obstack allocations.
	Merged the function cp_add_using into this one.
	Added 'struct obstack *' argument.
	(cp_scan_for_anonymous_namespaces): Updated.
	* cp-support.h: Updated.
	* dwarf2read.c (read_import_statement): Updated.
	(read_namespace): Updated.

2010-03-10  Pierre Muller  <[email protected]>

	* windows-nat.c (cygwin_conv_path): Remove old macro.

2010-03-10  Pedro Alves  <[email protected]>

	* breakpoint.c (condition_command): Handle watchpoint conditions.
	(is_hardware_watchpoint): Add comment.
	(is_watchpoint): New.
	(update_watchpoint): Don't reparse the watchpoint's condition
	unless necessary.
	(WP_IGNORE): New.
	(watchpoint_check): Use it.
	(bpstat_check_watchpoint): Handle it.
	(bpstat_check_breakpoint_conditions): Evaluate watchpoint local
	conditions in a frame where it makes sense.
	(watch_command_1): Store the innermost block of the condition
	expression.
	(delete_breakpoint): Delete the watchpoint condition expression.
	* breakpoint.h (struct bp_location) <cond>: Update comment.
	(struct breakpoint): New field `cond_exp_valid_block'.

2010-03-09  Joel Brobecker  <[email protected]>

	Adjust handling of Ada DIEs after dwarf2_physname patch.
	* dwarf2read.c (dwarf2_compute_name): Add handling of Ada DIEs.

2010-03-09  Christopher Faylor  <[email protected]>
	    Pierre Muller  <[email protected]>

	* windows-nat.c (cygwin_conv_path): Redefine to properly convert
	from/to posix/win32.
	(windows_make_so): Use non-Cygwin 1.7 specific function.
	(windows_create_inferior): Make sure that cygallargs points to
	original args in non Cygwin 1.7. case.

2010-03-09  Michael Snyder  <[email protected]>

	* i386-tdep.c (i386_record_lea_modrm_addr): Use extract_signed_int
	after target_read_memory to get host byte order.
	(i386_process_record): Ditto.

2010-03-09  Keith Seitz  <[email protected]>

	Based on work from Daniel Jacobowitz  <[email protected]>
	* c-typeprint.c (cp_type_print_method_args): For non-static methods,
	print out const or volatile qualifiers, too.
	(c_type_print_args): Add parameters show_artificial and language.
	Skip artificial parameters when requested.
	Use the appropriate language printer.
	(c_type_print_varspec): Tell c_type_print_args to skip artificial
	parameters and pass language_c.
	* dwarf2read.c (die_list): New file global.
	(struct partial_die_info): Update comments for name field.
	(pdi_needs_namespace): Renamed to ...
	(die_needs_namespace): ... this. Rewrite.
	(dwarf2_linkage_name): Remove.
	(add_partial_symbol): Do not predicate the call to
	partial_die_full_name based on pdi_needs_namespace.
	Remove call to cp_check_possible_namespace_symbols and associated
	outdated comments.
	(guess_structure_name): Do not inspect child subprogram DIEs.
	(dwarf2_fullname): Update comments.
	Use die_needs_namespace to assist in computing the name.
	(read_func_scope): Use dwarf2_name to get the DIE's name.
	Use dwarf2_physname to get the "linkage name" of the DIE.
	(dwarf2_add_member_field): Use dwarf2_physname instead of
	dwarf2_linkage_name.
	(read_structure_type): For structs and classes, set TYPE_NAME, too.
	(determine_class): Remove.
	(read_partial_die): Ignore DW_AT_MIPS_linkage_name for all languages
	except Ada.
	(new_symbol): Unconditionally call dwarf2_name.
	Compute the "linkage name" using dwarf2_physname.
	Use dwarf2_name instead of dwarf2_full_name for enumerator DIEs.
	When determining to scan for anonymous C++ namespaces, ignore
	the linkage name.
	(dwarf2_physname): New function.
	(dwarf2_full_name): Move content to new function and call
	that.
	(dwarf2_compute_name): "New" function.
	(_initialize_dwarf2_read): Initialize die_list.
	* gnu-v3-eabi.c (gnu_v3_find_method_in): Remove unused variable
	physname.
	(gnu_v3_print_method_ptr): Use the physname for virtual methods
	without a demangled name.
	Print out type information for non-virtual methods.
        * linespec.c (decode_line_1): Force ANY string using "::" (or
	"." for java) to use decode_compound, and clean up any stray quoting.
        If we found a file symtab, re-evaluate whether the remainder is_quoted.
        (decode_compound): Stop consuming at an open parenthesis.
        Keep template parameters.
        Keep any overload information.
        Keep keywords like "const".
        Remove paren_pointer.
        Move is_quoted check from set_flags to here.
        Remove #if 0 code from 2000. Ten years is long enough.
        (find_method): Before comparing symbol names, canonicalize the string
        from the user.
        If a specific overload is requested, find it. Otherwise throw an error.
	(find_method_overload_end): New function.
	(set_flags): Remove.
        (decode_compound): Assume that parentheses are matched.
        It's a lot easier.
	* symtab.c (symbol_find_demangled_name): Add DMGL_VERBOSE flag
	to cplus_demangle.
	* linespec.c (decode_line_1): Keep important keywords like
	"const" and "volatile".
	* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME): Remove.
	* typeprint.h (c_type_print_args): Add declaration.
	* ui-file.c (do_ui_file_obsavestring): New function.
	(ui_file_obsavestring): New function.
	* ui-file.h (ui_file_obsavestring): Add declaration.
	* valops.c (find_overload_match): Resolve the object to
	a non-pointer type.
	If the object is a data member, search the object for the member
	and return with staticp set.
	Use SYMBOL_NATURAL_NAME instead of SYMBOL_CPLUS_DEMANGLED_NAME.
	Do not attempt to extract a function name from non-function types.
	If the extracted function name and the original name are the same,
	we don't have a C++ method.

	From Jan Kratochvil  <[email protected]>:    
    	* dwarf2read.c (new_symbol <DW_TAG_enumerator>): Call dwarf2_full_name.

	* ada-lang.c (ada_lookup_symbol): Remove linkage_name parameters
	and arguments from symbol lookups.
	* ax-gdb.c (gen_expr): Likewise.
	* cp-namespace.c (cp_lookup_symbol_nonlocal, lookup_namespace_scope,
	cp_lookup_symbol_namespace, lookup_symbol_file, lookup_nested_type,
	lookup_possible_namespace_symbol): Likewise.
	* cp-support.c (read_in_psymtabs): Likewise.
	* cp-support.h (cp_lookup_symbol_nonlocal): Likewise.
	* language.h (la_lookup_symbol_nonlocal): Likewise.
	* scm-valprint.c (scm_inferior_print): Likewise.
	* solib-darwin.c (darwin_relocate_section_addresses): Likewise.
	* solib-svr.c (elf_lookup_lib): Likewise.
	* solib.c (show_auto_solib_add): Likewise.
	* solist.h (lookup_lib_global, solib_global_lookup): Likewise.
	* symmisc.c (maintenance_check_symtabs): Likewise.
	* symtab.c (lookup_symbol_in_language, lookup_symbol_aux,
	lookup_symbol_aux_local, lookup_symbol_aux_block,
	lookup_symbol_from_objfile, lookup_symbol_aux_symtabs,
	lookup_symbol_aux_psymtabs,basic_lookup_symbol_nonlocal,
	lookup_symbol_static, lookup_symbol_global, symbol_matches_domain,
	basic_lookup_transparent_type, find_main_psymtab,
	lookup_block_symbol): Likewise.
	* symtab.h (basic_lookp_symbol_nonlocal, lookup_symbol_static,
	lookup_symbol_global, lookup_symbol_aux_block,
	lookup_symbol_partial_symbol, lookup_block_symbol,
	lookup_global_symbol, value_maybe_namespace_elt): Likewise.

2010-03-09  Pierre Muller  <[email protected]>

	* python/python-internal.h: Include symtab.h.

2010-03-09  Joel Brobecker  <[email protected]>
	    Pierre Muller  <[email protected]>

	* p-lang.c (is_pascal_string_type): Remove unneeded parentheses.
	* p-valprint.c (pascal_val_print): Remove undeed block and fix
	indentation.

2010-03-08  Tom Tromey  <[email protected]>

	* breakpoint.c (breakpoint_1): Add "QUIT".

2010-03-08  Daniel Jacobowitz  <[email protected]>
	    Pedro Alves  <[email protected]>

	* solib.c (solib_find): Replace extension if
	solib_symbols_extension is set in the target gdbarch.
	* arm-symbian-tdep.c (arm_symbian_init_abi): Set
	solib_symbols_extension to "sym".
	* gdbarch.sh (solib_symbols_extension): New variable.
	(pstring): New function.
	* gdbarch.h, gdbarch.c: Regenerate.

2010-03-08  Tom Tromey  <[email protected]>

	PR cli/9591:
	* NEWS: Update.
	* utils.c: Include main.h.
	(fputs_maybe_filtered): Don't paginate if `batch_flag'.
	(defaulted_query): Use default answer if `batch_flag'.
	* main.h (batch_flag): Declare.
	* main.c (batch_flag): New global.
	(captured_main): Remove 'batch'.  Update.

2010-03-08  Kevin Buettner  <[email protected]>

	From Richard Sandiford, Martin M. Hunt, Corinna Vinschen,
	and Kevin Buettner:

	* remote-mips.c (rockhopper_ops): New target_ops struct.
	(MON_ROCKHOPPER): New mips_monitor_type.
	(read_hex_value): New function.
	(mips_request): Send 8-byte values with a 'T' packet.  Read the
	packet argument as a string and use read_hex_value to parse it.  
	(mips_exit_debug): Wait for response when using MON_ROCKHOPPER.
	(rockhopper_open): New function.
	(mips_wait): Read the PC, FP and SP fields as strings.  Use
	read_hex_value to parse them and mips_set_register to commit them.
	(mips_set_register): New function.
	(mips_fetch_registers): Do not cast register value to "unsigned"
	when reading a MON_ROCKHOPPER 't' packet.  Use mips_set_register.
	(mips_store_registers): Use a 'T' packet to set registers when
	using MON_ROCKHOPPER.
	(pmon_end_download): Don't run initEther if using MON_ROCKHOPPER
	and expect the total to be printed before the entry address.
	(_initialize_remote_mips): Initialize and add rockhopper_ops.

2010-03-08  Kevin Buettner  <[email protected]>

	* remote-mips.c (mips_fetch_word): Add new parameter, `valp'.
	Change return value to int.  Store value fetched in location
	addressed by `val'.  Use function's return value as success
	or failure indicator.  Adjust all callers.

2010-03-08  Pierre Muller  <[email protected]>

	* p-lang.c (is_pascal_string_type): Check that TYPE arg is non NULL.

2010-03-08  Jan Kratochvil  <[email protected]>
	    Hui Zhu  <[email protected]>

	* record.c (record_open_1): Check tmp_to_stopped_by_watchpoint and
	tmp_to_stopped_data_address.
	(record_open): Reset tmp_to_stopped_by_watchpoint and
	tmp_to_stopped_data_address.
	* target.c (init_dummy_target): Add to_stopped_by_watchpoint and
	to_stopped_data_address.

2010-03-08  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Initialize regnum.

2010-03-08  Jan Kratochvil  <[email protected]>

	* symfile.c (addr_info_make_relative): New variable sect_name, use it.
	Do not warn on ".gnu.liblist" and ".gnu.conflict".

2010-03-08  Joel Brobecker  <[email protected]>

	Memory error when reading wrong core file.
	* solib-svr4.c (solib_svr4_r_map): catch and print all exception
	errors while reading the inferior memory, and return zero if
	an exception was raised.

2010-03-07  Michael Snyder  <[email protected]>

	* record.c (record_restore): Rename tmpu8 to rectype.

	* i386-tdep.c (i386_record_lea_modrm_addr): Rename local variables
	tmpu8, tmpi16, tmpi32, tmpulongest to addr8, addr16, addr32, addr64.

	(i386_record_push): Rename local tmpulongest to addr.

	(i386_process_record): Rename local tmpulongest to addr.

	Rename local variables tmpu16, tmpu32, tmpu64 to addr16, addr32,
	addr64.

	Rename local variable tmpu8 to opcode8 and regnum.

2010-03-07  Joel Brobecker  <[email protected]>

	* remote.c (remote_get_ada_task_ptid): New function.
        (init_remote_ops): Set remote_ops.to_get_ada_task_ptid.

2010-03-06  Christopher Faylor  <[email protected]>

	* windows-nat.c: Reorganize #ifdef __CYGWIN__ considerations into one
	block.  Define helper macros to reduce ifdefs in code.
	(get_module_name): Use cygwin_buf_t for buffer and __PMAX for buffer
	size.  Call unadorned GetModuleFileNameEx rather than
	GetModuleFileNameEx*.
	(windows_make_so): Use __PMAX to denote maximum buffer size and
	cygwin_buf_t for buffer type.  Use GetSystemDirectory{W,A} as
	appropriate.
	(get_image_name): Use __PMAX to denote maximum buffer size.
	(handle_load_dll): Likewise.
	(windows_pid_to_exec_file): Likewise.
	(windows_create_inferior): Add many accommodations for older Cygwin and
	non-Cygwin.
	(bad_GetModuleFileNameExW): Control inclusion of this function based on
	__USEWIDE conditional.
	(bad_GetModuleFileNameExA): Likewise.
	(_initialize_loadable): Just use real function names without the dyn_
	part since they are defined earlier.

2010-03-05  Corinna Vinschen  <[email protected]>
	    Tom Tromey  <[email protected]>

	* utils.c (host_char_to_target): Add 'gdbarch' argument.
	(parse_escape): Likewise.
	* python/py-utils.c (unicode_to_target_string): Update.
	(unicode_to_target_python_string): Update.
	(target_string_to_unicode): Update.
	* printcmd.c (printf_command): Update.
	* p-exp.y (yylex): Update.
	* objc-exp.y (yylex): Update.
	* mi/mi-parse.c: Include charset.h.
	(mi_parse_escape): New function.
	(mi_parse_argv): Use it.
	* jv-exp.y (yylex): Update.
	* i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New
	function.
	(i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset.
	* gdbarch.sh (auto_charset, auto_wide_charset): New.
	* gdbarch.c: Rebuild.
	* gdbarch.h: Rebuild.
	* defs.h (parse_escape): Update.
	* cli/cli-setshow.c: Include arch-utils.h.
	(do_setshow_command): Update.
	* cli/cli-cmds.c (echo_command): Update.
	* charset.h (target_charset, target_wide_charset): Update.
	* charset.c: Include arch-utils.h.
	(target_charset_name): Default to "auto".
	(target_wide_charset_name): Likewise.
	(show_target_charset_name): Handle "auto".
	(show_target_wide_charset_name): Likewise.
	(be_le_arch): New global.
	(set_be_le_names): Add 'gdbarch' argument.
	(validate): Likewise.  Don't call set_be_le_names.
	(set_charset_sfunc, set_host_charset_sfunc)
	(set_target_charset_sfunc, set_target_wide_charset_sfunc):
	Update.
	(target_charset): Add 'gdbarch' argument.
	(target_wide_charset): Likewise.  Remove 'byte_order' argument.
	(auto_target_charset_name): New global.
	(default_auto_charset, default_auto_wide_charset): New functions.
	(_initialize_charset): Set auto_target_charset_name.  Allow "auto"
	for target charsets.  Copy result of nl_langinfo.  Use GetACP if
	USE_WIN32API.
	* c-lang.c (charset_for_string_type): Add 'gdbarch' argument,
	remove 'byte_order' argument.  Update.
	(classify_type): Likewise.
	(c_emit_char): Update.
	(c_printchar): Update.
	(c_printstr): Update.
	(c_get_string): Update.
	(evaluate_subexp_c): Update.
	* arch-utils.h (default_auto_charset, default_auto_wide_charset):
	Declare.
	* python/python.c (gdbpy_target_charset): New function.
	(gdbpy_target_wide_charset): Likewise.
	(GdbMethods): Update.
	* NEWS: Update.

2010-03-05  Ulrich Weigand  <[email protected]>

	* symfile.c (build_section_addr_info_from_objfile): Do not mask
	off high address bits.

2010-03-05  Ulrich Weigand  <[email protected]>

	* python/py-lazy-string.c (gdbpy_extract_lazy_string): Extract
	address as UnsignedLongLong, not LongLong.

2010-03-05  Kevin Buettner  <[email protected]>
            Pedro Alves  <[email protected]>

	* remote-mips.c (gdbthread.h): Include.
	(remote_mips_ptid): Declare.
	(mips_error): Only mourn the inferior when inferior_ptid is non-null.
	(common_open): Set inferior_ptid, add it as an inferior, and
	as a thread too.  Delete FIXME comment regarding start_remote().
	(mips_close): Invoke generic_mourn_inferior().
	(mips_kill): Make sure that target_mourn_inferior is invoked.
	(mips_mourn_inferior): Don't invoke generic_mourn_inferior, as
	it's now invoked from mips_close().
	(mips_load): Don't null out inferior_ptid.  Don't call
	clear_symtab_users().
	(mips_thread_alive, mips_pid_to_str): New functions.
	(_initialize_remote_mips): Initialize remote_mips_ptid.  Initialize
	to_thread_alive and to_pid_to_str operations.

2010-03-04  Tom Tromey  <[email protected]>

	* dwarf2read.c (skip_one_die) <DW_FORM_ref_addr>: Use offset size
	in DWARF 3 and later.
	(read_attribute_value) <DW_FORM_ref_addr>: Likewise.

2010-03-04  Keith Seitz  <[email protected]>

	* linespec.c (decode_line_1): Update comments for is_quote_enclosed.
	If the filename portion of the linespec was quoted, recheck the
	remainder for additional quoting.
	(locate_first_half): Skip over completer chars, too.

2010-03-04  Tom Tromey  <[email protected]>

	* printcmd.c (printf_command): Pass dummy argument to
	printf_filtered.

2010-03-04  Doug Evans  <[email protected]>

	* arm-tdep.c (arm_make_stub_cache): Delete unused locals reg,
	unwound_fp.

	* arm-tdep.c (arm_stub_unwind_sniffer): Add comment.

2010-03-04  Pedro Alves  <[email protected]>

	* breakpoint.c (update_watchpoint): Create a sentinel location if
	the software watchpoint isn't watching any memory.
	(breakpoint_address_bits): Skip dummy software watchpoint locations.

2010-03-04  Pedro Alves  <[email protected]>

	* utils.c (fputs_maybe_filtered): Check if there's already a top
	level interpreter before dereferencing it.  If there isn't one,
	don't paginate either.

2010-03-04  Matthew Gretton-Dann  <[email protected]>

	* arm-tdep.c (arm_pc_is_thumb): Add heuristic that tries to get
	the state right when single stepping.
	(arm_get_next_pc_raw, thumb_get_next_pc_raw): New functions.
	Get the next PC along with the instruction state.
	(thumb_get_next_pc): Remove.
	(arm_get_next_pc): Modified to use arm_get_next_pc_raw.

2010-03-04  Hui Zhu  <[email protected]>

	* i386-tdep.c (i386_process_record): Change "addr" to "tmpu64".

2010-03-03  Pedro Alves  <[email protected]>

	* utils.c (fputs_maybe_filtered): Always disable pagination if the
	top level interpreter is MI.

2010-03-03 Stan Shebs  <[email protected]>

	* remote.c (remote_download_tracepoint): Iterate over locations.
	* tracepoint.c (validate_actionline): Ditto.
	(encode_actions): Add location argument.
	(trace_dump_command): Check all locations to see if stepping
	frame.

2010-03-03  H.J. Lu  <[email protected]>
	    Eli Zaretskii  <[email protected]>

	* NEWS: Add X86 general purpose registers section.

2010-03-03  Tom Tromey  <[email protected]>

	PR mi/11098:
	* varobj.c (install_new_value): Handle case where new print_value
	is NULL.

2010-03-03  Dainis Jonitis  <[email protected]>

	PR gdb/11345:
	* printcmd.c (printf_command): Print end of format string using
	printf_filtered.

2010-03-02  Tom Tromey  <[email protected]>

	* mi/mi-cmd-break.c (mi_read_next_line): Add missing 'void'.
	* defs.h (read_command_lines_1): Add missing 'void'.
	* cli/cli-script.c (recurse_read_control_structure): Add missing
	'void'.
	(read_next_line): Likewise.
	(read_command_lines_1): Likewise.

2010-03-02  Ulrich Weigand  <[email protected]>

	* spu-tdep.c (spu_analyze_prologue): Track instruction to
	store backchain as part of prologue.

2010-03-02  Daniel Jacobowitz  <[email protected]>

	* progspace.c (update_address_spaces): Update inferior address spaces
	also.

2010-03-02  Doug Evans  <[email protected]>

	* dwarf2read.c (add_partial_subprogram): Add missing baseaddr to
	lowpc,highpc args to addrmap_set_empty.

2010-03-02  H.J. Lu  <[email protected]>

	* amd64-tdep.c (amd64_byte_names): New.
	(amd64_word_names): Likewise.
	(amd64_dword_names): Likewise.
	(amd64_pseudo_register_name): Likewise.
	(amd64_pseudo_register_read): Likewise.
	(amd64_pseudo_register_write): Likewise.
	(amd64_init_abi): Set num_byte_regs, num_word_regs, num_dword_regs
	and num_mmx_regs.  Call set_gdbarch_pseudo_register_read,
	set_gdbarch_pseudo_register_write and
	set_tdesc_pseudo_register_name.  Don't call
	set_gdbarch_num_pseudo_regs.  Don't set mm0_regnum.

	* i386-tdep.c (i386_num_mmx_regs): Removed.
	(i386_num_pseudo_regs): Likewise.
	(i386_byte_names): New.
	(i386_word_names): Likewise.
	(i386_byte_regnum_p): Likewise.
	(i386_word_regnum_p): Likewise.
	(i386_mmx_regnum_p): Updated.
	(i386_pseudo_register_name): Make it global.  Handle byte and
	word pseudo-registers.
	(i386_pseudo_register_read): Likewise.
	(i386_pseudo_register_write): Likewise.
	(i386_pseudo_register_type): Handle byte, word and dword
	pseudo-registers
	(i386_register_reggroup_p): Don't include pseudo
	registers, except for MXX, in any register groups.  Don't
	include pseudo byte, word, dword registers in general_reggroup.
	(i386_gdbarch_init): Set num_byte_regs, num_word_regs,
	num_dword_regs, al_regnum, ax_regnum and eax_regnum.  Put MMX
	pseudo-registers after word pseudo-registers.  Call
	set_gdbarch_num_pseudo_regs after calling gdbarch_init_osabi.

	* i386-tdep.h (gdbarch_tdep): Add num_mmx_regs, num_byte_regs,
	al_regnum, num_word_regs, ax_regnum, num_dword_regs and
	eax_regnum.
	(i386_byte_regnum_p): New.
	(i386_word_regnum_p): Likewise.
	(i386_dword_regnum_p): Likewise.
	(i386_pseudo_register_name): Likewise.
	(i386_pseudo_register_read): Likewise.
	(i386_pseudo_register_write): Likewise.

2010-03-01  H.J. Lu  <[email protected]>

	* target-descriptions.c (tdesc_type): Remove
	TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
	(tdesc_predefined_types): Likewise.
	(tdesc_gdb_type): Likewise.  Pass NULL to append_flags_type_flag
	if flag name is empty.
	(maint_print_c_tdesc_cmd): Handle TDESC_TYPE_FLAGS.

	* features/i386/32bit-core.xml: Define i386_eflags.
	* features/i386/64bit-core.xml: Likewise.

	* features/i386/32bit-sse.xml: Define i386_mxcsr.
	* features/i386/64bit-sse.xml: Likewise.

	* features/i386/amd64-linux.c: Regenerated.
	* features/i386/amd64.c: Likewise.
	* features/i386/i386-linux.c: Likewise.
	* features/i386/i386.c: Likewise.

2010-03-01  Daniel Jacobowitz  <[email protected]>

	* gdbtypes.c (append_composite_type_field_raw): New.
	(append_composite_type_field_aligned): Use the new function.
	* gdbtypes.h (append_composite_type_field_raw): Declare.
	* target-descriptions.c (struct tdesc_type_field): Add start and end.
	(struct tdesc_type_flag): New type.
	(struct tdesc_type): Add TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS to
	kind.  Add size to u.u.  Add u.f for flags.
	(tdesc_gdb_type): Handle TDESC_TYPE_STRUCT and TDESC_TYPE_FLAGS.
	(tdesc_free_type): Likewise.
	(tdesc_create_struct, tdesc_set_struct_size, tdesc_create_flags): New.
	(tdesc_add_field): Handle TDESC_TYPE_STRUCT.
	(tdesc_add_bitfield, tdesc_add_flag): New.
	* target-descriptions.h (tdesc_create_struct, tdesc_set_struct_size)
	(tdesc_create_flags, tdesc_add_bitfield, tdesc_add_flag): Declare.
	* xml-tdesc.c (struct tdesc_parsing_data): Rename current_union to
	current_type.  Add current_type_size and current_type_is_flags.
	(tdesc_start_union): Clear the new fields.
	(tdesc_start_struct, tdesc_start_flags): New.
	(tdesc_start_field): Handle struct fields, including bitfields.
	(field_attributes): Make type optional.  Add start and end.
	(union_children): Rename to struct_union_children.
	(union_attributes): Rename to struct_union_attributes.  Add optional
	size.
	(flags_attributes): New.
	(feature_children): Add struct and flags.
	* features/gdb-target.dtd: Add flags and struct to features.
	Make field type optional.  Add field start and end.

2010-03-01  H.J. Lu  <[email protected]>

	* amd64-linux-nat.c (AMD64_LINUX_USER64_CS): New.
	(amd64_linux_read_description): Likewise.
	(_initialize_amd64_linux_nat): Set to_read_description to
	amd64_linux_read_description.

	* amd64-linux-tdep.c: Include "features/i386/amd64-linux.c".
	(amd64_linux_register_name): Removed.
	(amd64_linux_register_type): Likewise.
	(amd64_linux_core_read_description): New.
	(amd64_linux_init_abi): Set target description to
	tdesc_amd64_linux if needed.  Support orig_rax in target
	description.  Don't call set_gdbarch_register_name nor
	set_gdbarch_register_type.  Call
	set_gdbarch_core_read_description.
	(_initialize_amd64_linux_tdep): Call
	initialize_tdesc_amd64_linux.

	* amd64-linux-tdep.h (tdesc_amd64_linux): New.

	* amd64-tdep.c:  Include "features/i386/amd64.c".
	(amd64_register_names): Removed.
	(amd64_register_name): Likewise.
	(amd64_register_type): Likewise.
	(amd64_init_abi):  Set num_core_regs and register_names.  Set
	target description to tdesc_amd64 if needed.  Don't call 
	set_gdbarch_register_name nor set_gdbarch_register_type.
	(_initialize_amd64_tdep): New.

	* i386-linux-nat.c (i386_linux_read_description): New.
	(_initialize_i386_linux_nat): Set to_read_description to
	i386_linux_read_description.

	* i386-linux-tdep.c: Include "features/i386/i386-linux.c".
	(i386_linux_register_name): Removed.
	(i386_linux_core_read_description): New.
	(i386_linux_read_description): Likewise.
	(i386_linux_init_abi): Don't call set_gdbarch_register_name.
	Set target description to tdesc_i386_linux if needed.  Support
	orig_eax.  Set register_reggroup_p.  Call
	set_gdbarch_core_read_description.
	(_initialize_i386_linux_tdep): Call initialize_tdesc_i386_linux.

	* i386-linux-tdep.h (tdesc_i386_linux): New.

	* i386-nto-tdep.c (i386nto_regset_id): Replace I386_NUM_FREGS
	with I387_NUM_REGS.

	* i386-tdep.c: Include "features/i386/i386.c".
	(i386_register_names): Make it const.
	(i386_mmx_names): Likewise.
	(i386_num_register_names): Removed.
	(i386_register_name): Likewise.
	(i386_eflags_type): Likewise.
	(i386_mxcsr_type): Likewise.
	(i386_sse_type): Likewise.
	(i386_register_type): Likewise.
	(i387_ext_type): Call tdesc_find_type instead of arch_float_type.
	(i386_pseudo_register_name): New.
	(i386_pseudo_register_type): Likewise.
	(i386_mmx_type): Make it static.
	(i386_gdbarch_init): Check arch.  Replace I386_NUM_FREGS with
	I387_NUM_REGS.  Set num_core_regs and register_names.  Don't
	call set_gdbarch_register_name nor set_gdbarch_register_type.
	Set register_reggroup_p.  Set target description to tdesc_i386
	if needed.  Call set_tdesc_pseudo_register_type,
	set_tdesc_pseudo_register_name and tdesc_use_registers.
	(_initialize_i386_tdep): Call initialize_tdesc_i386.
	initialize_tdesc_x86_64.

	* i386-tdep.h (gdbarch_tdep): Remove i386_eflags_type,
	i386_mxcsr_type and i386_sse_type.  Add num_core_regs,
	register_names, tdesc and register_reggroup_p.
	(I386_NUM_FREGS): Removed.
	(i386_eflags_type): Likewise.
	(i386_mxcsr_type): Likewise.
	(i386_mmx_type): Likewise.
	(i386_sse_type): Likewise.
	(i386_register_name): Likewise.
	(i386_regnum): Add I386_MXCSR_REGNUM.
	(I386_SSE_NUM_REGS): Defined with I386_MXCSR_REGNUM.

	* i387-tdep.h (I387_NUM_REGS): New.

	* regformats/i386/i386-linux.dat: Generated.
	* regformats/i386/i386.dat: Likewise.
	* regformats/i386/amd64-linux.dat: Likewise.
	* regformats/i386/amd64.dat: Likewise.

	* regformats/reg-i386-linux.dat: Removed.
	* regformats/reg-i386.dat: Likewise.
	* regformats/reg-x86-64-linux.dat: Likewise.
	* regformats/reg-x86-64.dat: Likewise.

2010-03-01  Corinna Vinschen  <[email protected]>

	* remote-fileio.c (remote_fileio_func_rename): Use Cygwin 1.7
	cygwin_conv_path API rather than the deprecated
	cygwin_conv_to_full_posix_path.
	* windows-nat.c:
	(GetModuleFileNameExA): Undefine for Cygwin.
	(GetModuleFileNameExW): Define for Cygwin.
	(get_module_name): Change size of pathbuf to PATH_MAX for Cygwin.
	Call GetModuleFileNameExW and convert path to POSIX using
	cygwin_conv_path.
	(windows_make_so): Always define p.  Drop unused variable m.
	Don't use Win32 functions to check file existance, rather use
	access on Cygwin.  Fetch system directory using GetSystemDirectoryW.
	Use canonicalize_file_name to get full path.
	(get_image_name): Use wcstombs, rather than WideCharToMultiByte
	to convert Unicode pathname to multibyte on Cygwin.  Otherwise,
	use correct target buffer size in call to WideCharToMultiByte.
	(handle_load_dll): Change size of dll_buf to PATH_MAX for Cygwin.
	(windows_pid_to_exec_file): Change size of path to PATH_MAX for Cygwin.
	(windows_create_inferior): Convert all paths and arguments to wchar_t
	and use CreateProcessW on Cygwin.
	(_initialize_windows_nat): Disable DOS-style path warning on Cygwin.
	(bad_GetModuleFileNameExA): Undefine for Cygwin.
	(bad_GetModuleFileNameExW): Define for Cygwin.
	(_initialize_loadable): Load GetModuleFileNameExW into
	dyn_GetModuleFileNameExW on Cygwin.  Don't load ANSI function on Cygwin.

2010-02-28  Phil Muldoon  <[email protected]>

	PR python/11036
	* python/py-frame.c (frapy_read_var): Add block argument and logic
	to cope with user provided blocks.

2010-02-28  Jan Kratochvil  <[email protected]>

	* infcall.c (call_function_by_hand): Remove gdb_assert on sp and old_sp.
	New comment.

2010-02-28  Corinna Vinschen  <[email protected]>

	* Makefile.in (SUBDIR_MI_OBS): Move mi-common.o from here...
	(COMMON_OBS): ... to here since it's used unconditionally.
	(SUBDIR_MI_SRCS): Move mi/mi-common.c from here...
	(SFILES): To here.

2010-02-26  David Daney  <[email protected]>

	* mips-linux-tdep.c: Update struct sigframe comments.
	(SIGFRAME_CODE_OFFSET): Delete macro.
	(mips_linux_o32_sigframe_init): Calculate sigcontext_base using
	this_frame's sp.
	(mips_linux_n32n64_sigframe_init): Same.

2010-02-26  Kevin Buettner  <[email protected]>

	* remote-mips.c (mips_load): Don't use pseudo-register when
	invalidating regcache.

2010-02-26  Daniel Jacobowitz  <[email protected]>

	* arm-tdep.c (thumb_get_next_pc): Correct conditional branch opcode.

2010-02-26  Pedro Alves  <[email protected]>

	* NEWS: Add "New targets" section, and mention ARM Symbian
	support.

2010-02-26  Ulrich Weigand  <[email protected]>

	* dwarf2loc.c (struct piece_closure): Remove ARCH member,
	add ADDR_SIZE member.
	(allocate_piece_closure): Update.
	(copy_pieced_value_closure): Likewise.
	(dwarf2_evaluate_loc_desc): Likewise.
	(read_pieced_value): Use DWARF address size instead of
	GDB's gdbarch_addr_bit as size of values on the DWARF stack.

2010-02-26  Phil Muldoon  <[email protected]>
            Tom Tromey  <[email protected]>

	* python/py-type.c (typy_lookup_typename): Add in block argument.
	If provided restrict lookup to specified blocks.
	(gdbpy_lookup_type): Likewise.
	(typy_lookup_type): Likewise.

2010-02-25  Daniel Jacobowitz  <[email protected]>
 
	Symbian config

	gdb/
	* arm-symbian-tdep.c: New.
	* configure.tgt (arm*-*-symbianelf*): New target.
	(*-*-symbianelf*): New OS.
	* osabi.c (gdb_osabi_names): Add Symbian.
	* defs.h (gdb_osabi): Add GDB_OSABI_SYMBIAN.
	* Makefile.in (ALL_TARGET_OBJS): Add arm-symbian-tdep.o.
	(ALLDEPFILES): Add arm-symbian-tdep.c.

2010-02-25  Daniel Jacobowitz  <[email protected]>

	* symfile.c (find_lowest_section): Include SEC_ALLOC sections.

2010-02-24  Pedro Alves  <[email protected]>

	* mi/mi-main.c (mi_cmd_execute): Fix typo.

2010-02-24  Phil Muldoon  <[email protected]>
   	    Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>

	* python/python.c (_initialize_python): Call
	gdbpy_initialize_symtabs, gdbpy_initialize_symbols and
	gdbpy_initialize_blocks.
	* python/python-internal.h: Declare struct symbol, block and
	symtab_and_line.  Declare block_object_type and
	symbol_object_type
	(gdbpy_lookup_symbol gdbpy_block_for_pc)
	(symtab_and_line_to_sal_object, symtab_to_symtab_object)
	(symbol_to_symbol_object,  block_to_block_object)
	(gdbpy_initialize_symtabs,gdbpy_initialize_symbols)
	(gdbpy_initialize_blocks ): Declare.
	* python/py-frame.c (frapy_block, frapy_function, frapy_find_sal)
	(frapy_select): Add methods.
	(frapy_read_var): Add symbol branch.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add py-symbol, py-symtab,
	py-block.
	(SUBDIR_PYTHON_SRCS): Likewise.
	(py-symbol.o): New rule.
	(py-symtab.o): Likewise.
	(py-block.o): Likewise.
	* python/py-symbol.c: New file.
	* python/py-symtab.c: Likewise.
	* python/py-block.c: Likewise.

2010-02-24  Pedro Alves  <[email protected]>

	PR gdb/11321

	* inferior.h (prepare_for_detach): Declare.
	(struct inferior) <detaching>: New field.
	* infrun.c (prepare_for_detach): New.
	(handle_inferior_event) <random signal>: Don't stop if detaching.
	* target.c (target_detach): Call prepare_for_detach.

2010-02-24  Pedro Alves  <[email protected]>

	Per-process displaced stepping queue.

	* infrun.c (displaced_step_ptid, displaced_step_request_queue)
	(displaced_step_gdbarch, displaced_step_closure,
	(displaced_step_original, displaced_step_copy): Move globals to
	this...
	(struct displaced_step_inferior_state): ... new structure.
	(displaced_step_inferior_states): New global.
	(get_displaced_stepping_state, add_displaced_stepping_state)
	(remove_displaced_stepping_state, infrun_inferior_exit): New
	functions.
	(displaced_step_clear): Add displaced_step_inferior_state
	parameter, and adjust to handle it.
	(displaced_step_clear_cleanup): Parameter is now a
	displaced_step_inferior_state.  Adjust.
	(displaced_step_prepare): Adjust.
	(displaced_step_fixup, displaced_step_fixup)
	(infrun_thread_ptid_changed, resume): Adjust.
	(init_wait_for_inferior): Don't call displaced_step_clear.
	(infrun_thread_stop_requested): Rewrite.
	(_initialize_infrun): Install infrun_inferior_exit as
	inferior_exit observer.

2010-02-24  Pedro Alves  <[email protected]>

	* inferior.h (ptid_match): Declare.
	* infrun.c (ptid_match): New.
	* remote.c (queued_stop_reply): Rewrite and use ptid_match.
	(handle_notification): Add debug output.
	* linux-nat.c (ptid_match): Delete.

2010-02-24  David S. Miller  <[email protected]>

	* gdb_ptrace.h (PT_SYSCALL): If PTRACE_SYSCALL is available, use it.
	* syscalls/sparc-linux.xml: New.
	* syscalls/sparc64-linux.xml: New.
	* Makefile.in (XML_SYSCALL_FILES): Add new syscall XML files.
	* sparc-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC32): Define.
	(sparc32_linux_get_syscall_number): New function.
	(sparc32_linux_init_abi): Set syscall XML file name and hook up
	syscall number fetcher.
	* sparc64-linux-tdep.c (XML_SYSCALL_FILENAME_SPARC64): Define.
	(sparc64_linux_get_syscall_number): New function.
	(sparc64_linux_init_abi): Set syscall XML file name and hook up
	syscall number fetcher.

2010-02-24  Vladimir Prus  <[email protected]>

	Multiexec MI

	* breakpoint.c (clear_syscall_counts): Take struct inferior*.
	* inferior.c (add_inferior_silent): Notify inferior_added
	observer.
	(delete_inferior_1): Notify inferior_removed observer.
	(exit_inferior_1): Pass inferior, not pid, to observer.
	(inferior_appeared): Likewise.
	(add_inferior_with_spaces): New.
	(add_inferior_command): Use the above.
	* inferior.h (delete_inferior_1, add_inferior_with_spaces):
	Declare.

	* inflow.c (inflow_inferior_exit): Likewise.
	* jit.c (jit_inferior_exit_hook): Likewise.

	* mi/mi-cmds.c (mi_cmds): Register add-inferior and
	remove-inferior.
	* mi/mi-cmds.h (mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
	* mi/mi-interp.c (mi_inferior_added, mi_inferior_removed): New.
	(report_initial_inferior): New.
	(mi_inferior_removed): Register the above. Make sure
	inferior_added observer is called on the first inferior.
	(mi_new_thread, mi_thread_exit): Thread group is now identified by
	inferior number, not pid.
	(mi_solib_loaded, mi_solib_unloaded): Report which inferiors are
	affected.
	* mi/mi-main.c (current_context): New.
	(proceed_thread_callback): Use typed closure.
	Proceed everything if pid is 0. Most implementation split into
	(proceed_thread): ... this.
	(run_one_inferior): New.
	(mi_cmd_exec_continue, mi_cmd_exec_interrupt, mi_cmd_exec_run):
	Adjust for multiexec behaviour.
	(mi_cmd_add_inferior, mi_cmd_remove_inferior): New.
	(mi_cmd_execute): Handle the 'thread-group' option here.
	Do some extra checks.
	* mi-parse.c (mi_parse): Handle the --all and --thread-group
	options.
	* mi-parse.h (struct mi_parse): New fields all and thread_group.

2010-02-24  Vladimir Prus  <[email protected]>

	Make -exec-run a proper MI commands.

	* mi/mi-cmds.h (mi_cmd_exec_run): Declare.
	* mi/mi-cmds.c (mi_cmds): Adjust.
	* mi/mi-main.c (mi_cmd_exec_run): New.

2010-02-24  Pedro Alves  <[email protected]>
	    Stan Shebs  <[email protected]>

	* tracepoint.h (set_traceframe_number)
	(cleanup_restore_current_traceframe): Declare.
	* tracepoint.c (set_traceframe_number): New.
	(struct current_traceframe_cleanup): New.
	(do_restore_current_traceframe_cleanup)
	(restore_current_traceframe_cleanup_dtor)
	(make_cleanup_restore_current_traceframe): New.
	* infrun.c: Include tracepoint.h.
	(fetch_inferior_event): Switch out and in of tfind mode.

2010-02-24  Pedro Alves  <[email protected]>

	* breakpoint.c (breakpoint_init_inferior): Also delete
	bp_shlib_event breakpoints.
	* solib-frv.c (enable_break): Remove call to
	remove_solib_event_breakpoints.
	* solib-svr4.c (enable_break): Ditto.
	* solib-darwin.c (darwin_solib_create_inferior_hook): Ditto.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Ditto.
	* solib-som.c (som_solib_create_inferior_hook): Ditto.
	* solib-spu.c (spu_enable_break): Ditto.

2010-02-23  Harald Koenig  <[email protected]>

	* c-exp.y (token_and_value): s/union YYSTYPE/YYSTYPE.

2010-02-23  Harald Koenig  <[email protected]>

	* varobj.c (varobj_update): Avoid non-constants in initializers.

2010-02-23  Tom Tromey  <[email protected]>

	* dwarf2loc.c (read_pieced_value) <DWARF_VALUE_STACK>: Correctly
	handle big-endian values.
	(dwarf2_evaluate_loc_desc) <DWARF_VALUE_STACK>: Likewise.

2010-02-22  Pedro Alves  <[email protected]>

	PR9605

	gdb/
	* breakpoint.c (insert_bp_location): If inserting the read
	watchpoint failed, fallback to an access watchpoint.
	(bpstat_check_watchpoint): Stop for read watchpoint triggers even
	if the value changed, if not watching the same memory for writes.
	(watchpoint_locations_match): Add comment.
	(update_global_location_list): Copy the location's watchpoint type.
	* i386-nat.c (i386_length_and_rw_bits): It's an internal error to
	handle read watchpoints here.
	(i386_insert_watchpoint): Read watchpoints aren't supported.
	* remote.c (remote_insert_watchpoint): Return 1 for unsupported
	packets.
	* target.h (target_insert_watchpoint): Update description.

2010-02-19  Tom Tromey  <[email protected]>

	* p-typeprint.c (pascal_type_print_varspec_prefix): Update.
	* m2-typeprint.c (m2_print_type): Update.
	* gdbtypes.c (recursive_dump_type): Update.
	(copy_type_recursive): Update.
	* c-typeprint.c (c_type_print_varspec_prefix): Update.
	(c_type_print_base): Update.
	* gdbtypes.h (TYPE_CODE_TEMPLATE, TYPE_CODE_TEMPLATE_ARG):
	Remove.
	(struct cplus_struct_type) <ntemplate_args>: Remove.
	<struct template_arg>: Remove.
	<is_dynamic>: Move earlier.
	(TYPE_TEMPLATE_ARGS): Remove.
	(TYPE_NTEMPLATE_ARGS): Remove.
	(TYPE_TEMPLATE_ARG): Remove.

2010-02-19  Tom Tromey  <[email protected]>

	PR c++/8693, PR c++/9496:
	* cp-namespace.c (cp_lookup_nested_type): Handle TYPE_CODE_UNION.
	* c-exp.y (lex_one_token): Rename from yylex.  Don't call
	write_dollar_variable.  Don't try to classify NAME tokens.
	(token_and_value): New type.
	(token_fifo, popping, name_obstack): New globals.
	(classify_name): New function.
	(classify_inner_name): Likewise.
	(yylex): Likewise.
	(VARIABLE): Now has type sval.
	(exp : VARIABLE): Call write_dollar_variable.
	(qualified_name): Use TYPENAME, not typebase.  Add production for
	multiple "::" instances.
	(variable): Use name_not_typename.
	(qualified_type): Remove.
	(typebase): Update.

2010-02-19  Jan Kratochvil  <[email protected]>

	* symfile.c (addr_info_make_relative): Extend comment.  Move SECT to
	a more inner block.  Initialize ADDR by LOWER_OFFSET only if it was
	found by bfd_get_section_by_name.
	* symfile.h (struct section_addr_info) <sectindex>: New comment.

2010-02-19  Joel Brobecker  <[email protected]>

	* NEWS: Add new "[...] since 7.1" section.  Rename the "[...] since
	7.0 section" into "Changes in 7.1".

2010-02-19  Joel Brobecker  <[email protected]>

	GDB 7.1 branch created (branch timestamp: 2010-02-18 20:00 UTC)
	* version.in: Bump version to 7.1.50.20100219-cvs.

2010-02-18  Harald Koenig  <[email protected]>

	* mi/mi-main.c (mi_cmd_exec_jump): Drop unneeded `return'.
	* symfile.c (symfile_map_offsets_to_segments): Fix assertion.

2010-02-17  Tom Tromey  <[email protected]>

	* NEWS: Add Python API Improvements section.

2010-02-18  Daniel Jacobowitz  <[email protected]>

	* NEWS: Correct typo.

2010-02-17  Tom Tromey  <[email protected]>

	* objfiles.c (gdb_bfd_ref): Handle abfd==NULL.

2010-02-17  Jan Kratochvil  <[email protected]>

	* symfile.c (build_section_addr_info_from_objfile): Include sections
	only if they are SEC_ALLOC or SEC_LOAD.

2010-02-17  H.J. Lu  <[email protected]>

	PR shlibs/11293
	* solib-svr4.c (enable_break): Check size of CORE_ADDR instead
	of ULONGEST for address size.

2010-02-17  Tom Tromey  <[email protected]>

	* NEWS: Add C++ improvements section.

2010-02-17  Ulrich Weigand  <[email protected]>

	* python/python-internal.h [!WITH_THREAD] (PyGILState_Release,
	PyThreadState_Swap): Avoid "statement with no effect" warning.

2010-02-17  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (enable_break <target_auxv_search>): New variable
	addr_bit.  Adjust LOAD_ADDR sign for cross-arch inferiors.

2010-02-17  Tristan Gingold  <[email protected]>
	    Petr Hluzín <[email protected]>

	* avr-tdep.c (avr_scan_prologue): Convert an if statement to a
	gdb_assert.  Fix info->size for SIG prologue.

2010-02-16  Daniel Jacobowitz  <[email protected]>

	* infcmd.c (show_inferior_tty_command): Check for NULL.
	Correct output message.

2010-02-16  Daniel Jacobowitz  <[email protected]>

	* linespec.c (decode_line_1): Handle FILE:FUNCTION even if
	FUNCTION contains parentheses.  Improve removal of a trailing
	single quote.

2010-02-16  Daniel Jacobowitz  <[email protected]>

	* gcore.c (do_bfd_delete_cleanup): New function.
	(gcore_command): Use it.  Discard the cleanup after success.
	(gcore_copy_callback): Delete dead code.

2010-02-16  Daniel Jacobowitz  <[email protected]>

	* symfile.c (addr_info_make_relative): Always use
	find_lowest_section.

2010-02-16  Sami Wagiaalla <[email protected]>

	* NEWS: Added entry for namespace fixes.

2010-02-15  Tom Tromey  <[email protected]>

	* dwarf2read.c (guess_structure_name): Allocate name on the
	objfile obstack.

2010-02-15  Tom Tromey  <[email protected]>

	* c-typeprint.c (c_type_print_base): Reverse order of test.

2010-02-15  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (LM_ADDR_CHECK): New variable minpagesize.  Optionally
	initialize it from ELF BFD.  Extend the prelink condition by it.

2010-02-15  Jan Kratochvil  <[email protected]>

	* defs.h (parse_pid_to_attach): New.
	* utils.c (parse_pid_to_attach): New.
	* darwin-nat.c (darwin_attach): Replace ARGS parsing by parse_pid.
	* gnu-nat.c (gnu_attach): Likewise.
	* nto-procfs.c (procfs_attach): Likewise.
	* procfs.c (procfs_attach): Likewise.
	* windows-nat.c (windows_attach): Likewise.
	* inf-ptrace.c (inf_ptrace_attach): Likewise.  Remove variable dummy.
	* inf-ttrace.c (inf_ttrace_attach): Likewise.
	* remote.c (extended_remote_attach_1): Likewise.  New comment on getpid
	check.

2010-02-14  Masaki Muranaka  <[email protected]>

	* MAINTAINERS: Add myself for write after approval privileges.

2010-02-13  Jan Kratochvil  <[email protected]>

	* solib-svr4.c: (LM_ADDR_CHECK): Move variable align to a more inner
	block.

2010-02-13  Jan Kratochvil  <[email protected]>

	* solib-svr4.c: (LM_ADDR_CHECK): Print successful prelink adjustment
	only if INFO_VERBOSE.

2010-02-12  Tomas Holmberg <[email protected]>

	* mi/mi-main.c: Added the --reverse flag to the following MI
	commands: exec-continue, exec-finish, exec-next, exec-step,
	exec-next-instruction, exec-step-instruction. This is to
	support reverse execution over the MI interface to gdb.

2010-02-12  Pedro Alves  <[email protected]>

	* tracepoint.c (_initialize_tracepoint): Specify that the address
	range of `tfind outsize' is exclusive, and that the address range
	of `tfind range' is inclusive, in the commands' help strings.

2010-02-12  Joel Brobecker  <[email protected]>

	Spurious "dll not found" error messages on x64-windows.
	* windows-nat.c: Add include of complaints.h.
	(handle_unload_dll): Change dll-not-found error into a complaint.

2010-02-12  Pedro Alves  <[email protected]>

	* breakpoint.c (allocate_bp_location): Use bp_loc_other for
	bp_tracepoint and bp_fast_tracepoint, not
	bp_loc_software_breakpoint.
	(update_global_location_list): Tracepoints are never duplicates of
	anything.

2010-02-12  Pedro Alves  <[email protected]>

	* breakpoint.c (break_command_really): Change return type to int.
	Return false if no breakpoint was created, true otherwise.
	(trace_command): Don't set the tracepoint count if no tracepoint
	was created.
	(ftrace_command): Ditto.
	(create_tracepoint_from_upload): Bail out if the tracepoint wasn't
	created in the breakpoints table.

2010-02-11  Jan Kratochvil  <[email protected]>
	    Ulrich Weigand  <[email protected]>

	* solib-svr4.c (LM_ADDR_CHECK): New comment on PPC-aware condition.

2010-02-11  Pedro Alves  <[email protected]>

	* ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out if
	the offset value isn't of integral type.

2010-02-11  Jan Kratochvil  <[email protected]>

	* breakpoint.c (delete_breakpoint) <bpt->related_breakpoint != NULL>:
	New.

2010-02-11  Pedro Alves  <[email protected]>

	* ax-gdb.c (gen_exp_binop_rest) [BINOP_SUBSCRIPT]: Error out on
	non-subscriptable types.
	* valarith.c (binop_types_user_defined_p): New, abstracted out
	from ...
	(binop_user_defined_p): ... this.
	* value.h (binop_types_user_defined_p): Declare.

2010-02-11  Pedro Alves  <[email protected]>

	* tracepoint.c (tfile_open): Remove spurious discard_cleanups.
	Merge uploaded TSVs before merging uploaded tracepoints.

2010-02-11  Pedro Alves  <[email protected]>

	* ax-gdb.c (gen_deref): Don't allow dereferencing void pointers.

2010-02-11  Vladimir Prus  <[email protected]>

	* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Add extra
	whitespace character after a dot in comment.
	(mi_cmd_stack_list_arguments, mi_cmd_stack_list_variables):
	Likewise.
	(list_args_or_locals): For the 'all' (that is
	-stack-list-variables) case, always output list of tuples.
	Output 'arg' field if variable is argument.

2010-02-10  Tom Tromey  <[email protected]>

	* parser-defs.h (parser_debug): Declare.
	* parse.c (_initialize_parse): Install "debug parser" set/show
	command.
	(parser_debug): New global.
	(show_parserdebug): New function.
	* c-exp.y (c_parse): Set yydebug.

2010-02-10  H.J. Lu  <[email protected]>

	* target-descriptions.c (tdesc_type): Add TDESC_TYPE_I387_EXT,
	TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.
	(tdesc_predefined_types): Add i387_ext, i386_eflags and
	i386_mxcsr.
	(tdesc_find_type): New.
	(tdesc_gdb_type): Use tdesc_find_type.  Handle TDESC_TYPE_I387_EXT,
	TDESC_TYPE_I386_EFLAGS and TDESC_TYPE_I386_MXCSR.

	* target-descriptions.h (tdesc_find_type): New.

2010-02-10  Michael Snyder  <[email protected]>

	* gdb-gdb.py: Comment fix.

2010-02-09  Tristan Gingold  <[email protected]>

	* machoread.c (macho_symfile_relocate): New function.
	(macho_sym_fns): Use macho_symfile_relocate instead of
	default_symfile_relocate.
	(macho_oso_data): New type.
	(current_oso): New variable.
	(macho_add_oso_symfile): Do not compute section_addr_info, but
	instead set vma of sections.
	Do not set SYMFILE_VERBOSE to call symbol_file_add_from_bfd.
	Set and clear current_oso.

2010-02-09  Joel Brobecker  <[email protected]>

	Wrong type description for tagged type parameter.
	* ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: When noside is
	EVAL_AVOID_SIDE_EFFECTS, also handle the case when type is a
	reference to a tagged type.

2010-02-09  Tristan Gingold  <[email protected]>

	* objfiles.c (objfile_separate_debug_iterate): Do not iterate on
	brothers of the parent.

2010-02-08  Tom Tromey  <[email protected]>

	PR c++/8017:
	* value.h: Update.
	* valops.c (search_struct_field): Make 'name' const.
	(search_struct_method): Likewise.
	(find_method_list): Make 'method' const.
	(value_struct_elt): Make 'name' and 'err' const.
	(value_find_oload_method_list): Make 'method' const.
	(find_overload_match): Make 'name' const.
	* eval.c (evaluate_subexp_standard): New locals function,
	function_name.
	<OP_FUNCALL>: Handle OP_SCOPE specially.

2010-02-08  Ulrich Weigand  <[email protected]>

	* infrun.c (handle_inferior_event): Do not look up regcache
	for exited processes.

Mon Feb  8 13:17:10 2010  Chris Moller  <[email protected]>

	PR gdb/10728
	* valarith.c (value_ptrdiff): Added a test for a zero type length,
	warn if found, and assume length = 1. 

2010-02-08  Chris Moller  <[email protected]>

	PR gdb/9067
	* cp-valprint.c (cp_print_value_fields) Fix use of obstacks.
	cp_print_static_field)  Fix use of obstacks.
	
2010-02-08  Pedro Alves  <[email protected]>

	* linux-nat.c (linux_nat_resume): In non-stop, also only tag
	resumed LWPs as resumed.
	(linux_nat_wait_1): If there's no resumed LWP in the set of LWPs
	we're waiting for, bail out with TARGET_WAITKIND_IGNORE, instead
	of throwing an internal error.  If an LWP of a process we're not
	waiting for reports a signal, don't force collecting a SIGSTOP,
	and if it was breakpoint hit in non-stop mode, cancel it.  Don't
	go through all LWPs cancelling breakpoints in non-stop mode.
	(resume_stopped_resumed_lwps): New.
	(linux_nat_wait): Use it.

2010-02-07  H.J. Lu  <[email protected]>

	* features/Makefile (WHICH): Add i386/i386, i386/i386-linux,
	i386/amd64 and i386/amd64-linux.
	(i386/i386-expedite): New.
	(i386/i386-linux-expedite): Likewise.
	(i386/amd64-expedite):Likewise.
	(i386/amd64-linux-expedite): Likewise.
	($(outdir)/i386/i386-linux.dat): Likewise.
	($(outdir)/i386/amd64.dat): Likewise.
	($(outdir)/i386/amd64-linux.dat): Likewise.

	* features/i386/32bit-core.xml: New.
	* features/i386/32bit-linux.xml: Likewise.
	* features/i386/32bit-sse.xml: Likewise.
	* features/i386/64bit-core.xml: Likewise.
	* features/i386/64bit-linux.xml: Likewise.
	* features/i386/64bit-sse.xml: Likewise.
	* features/i386/i386-linux.xml: Likewise.
	* features/i386/i386.xml: Likewise.
	* features/i386/amd64-linux.xml: Likewise.
	* features/i386/amd64.xml: Likewise.
	* features/i386/i386-linux.c: Likewise.
	* features/i386/i386.c: Likewise.
	* features/i386/amd64-linux.c: Likewise.
	* features/i386/amd64.c: Likewise.

2010-02-05  Sami Wagiaalla  <[email protected]>

	PR c++/7935:
	* cp-support.h: Added char* alias element to using_direct data
	struct.
	(cp_add_using): Added char* alias argument.
	(cp_add_using_directive): Ditto.
	* cp-namespace.c: Updated with the above changes.
	(cp_lookup_symbol_imports): Check for aliases.
	* dwarf2read.c (read_import_statement): Figure out local alias
	for the import and pass it on to cp_add_using.
	(read_namespace): Pass alias argument to cp_add_using.

2010-02-05  Hui Zhu  <[email protected]>

	* defs.h (gdb_bfd_errmsg): New extern.
	* exec.c (exec_file_attach): Change bfd_errmsg to
	gdb_bfd_errmsg.
	* utils.c (AMBIGUOUS_MESS1): New macro.
	(AMBIGUOUS_MESS2): New macro.
	(gdb_bfd_errmsg): New function.

2010-02-04  Doug Evans  <[email protected]>

	* solib-svr4.c (enable_break): Add comment.

2010-02-04  Anthony Green  <[email protected]>

	* moxie-tdep.c (moxie_analyze_prologue): Fail protocol analysis
	gracefully.

2010-02-04  Tom Tromey  <[email protected]>

	* valops.c (search_struct_field): Account for
	value_embedded_offset.  Fix check for virtual base past the end of
	the object.  Use value_copy when making a slice of the value.

2010-02-04  H.J. Lu  <[email protected]>

	PR tui/9622
	* tui/tui-interp.c (tui_init): Call tui_initialize_readline
	only if gdb_stdout is a tty.

2010-02-04  H.J. Lu  <[email protected]>

	* target-descriptions.c: Include "osabi.h".
	(maint_print_c_tdesc_cmd): Generate set_tdesc_osabi for valid
	OSABI.

2010-02-04  Tristan Gingold  <[email protected]>

	* machoread.c (macho_add_oso): Renamed to macho_register_oso.
	(macho_symtab_read): Adjust calls to macho_add_oso.
	(macho_oso_symfile): Renamed to macho_symfile_read_all_oso.
	(macho_symfile_read): Adjust call to macho_oso_symfile.
	(macho_new_init): Move this function after declarations.
	(macho_symfile_init): Ditto.
	* darwin-nat-info.c (darwin_lib_gdb_ports): Remove.
	* darwin-nat.c (darwin_lookup_task): Remove unused prototype.

2010-02-04  Vladimir Prus  <[email protected]>

	Include MI command in remotelog.

	* mi/mi-main.c (mi_execute_command): Call target_log_command.

2010-02-03  H.J. Lu  <[email protected]>

	* remote.c (remote_state): Remove gdbarch.
	(init_remote_state): Don't set gdbarch.
	(remote_query_supported): Pass target_gdbarch instead of
	rs->gdbarch to gdbarch_qsupported.

2010-02-03  H.J. Lu  <[email protected]>

	* gdbarch.sh: Add qsupported.

	* gdbarch.c: Regenerated.
	* gdbarch.h: Likewise.

	* remote.c (remote_state): Add gdbarch.
	(init_remote_state): Set gdbarch.
	(remote_query_supported): Support gdbarch_qsupported.

2010-02-03  Daniel Jacobowitz  <[email protected]>

	* amd64fbsd-nat.c (amd64fbsd_supply_pcb): Also check for
	__FreeBSD_kernel_version.

2010-02-03  Tristan Gingold  <[email protected]>

	* symfile.h (struct sym_fns): Add sym_relocate field.
	(default_symfile_relocate): New prototype.
	(symfile_relocate_debug_section): First argument is now an objfile.
	* symfile.c (default_symfile_relocate): Rename from
	symfile_relocate_debug_section, first argument is now an objfile.
	(symfile_relocate_debug_section): New function.
	* coffread.c (coff_sym_fns): Set sym_relocate field.
	* somread.c (som_sym_fns): Ditto.
	* mipsread.c (ecoff_sym_fns): Ditto.
	* machoread.c (macho_sym_fns): Ditto.
	* elfread.c (elf_sym_fns): Ditto.
	* dwarf2read.c (dwarf2_read_section): Ditto.
	* xcoffread.c (xcoff_sym_fns): Ditto.
	* dbxread.c (aout_sym_fns): Ditto.
	(dbx_psymtab_to_symtab): Adjust call to symfile_relocate_debug_section.
	(elfstab_build_psymtabs): Ditto.

2010-02-03  H.J. Lu  <[email protected]>

	* defs.h (MAX_REGISTER_SIZE): Increase to 32.

2010-02-02  Tom Tromey  <[email protected]>

	* valops.c (value_cast_structs): Try downcasting using the RTTI
	type.

2010-02-02  Tom Tromey  <[email protected]>

	* gnu-v2-abi.c: Don't include gnu-v2-abi.h.
	(gnuv2_baseclass_offset): Now static.
	* Makefile.in (HFILES_NO_SRCDIR): Remove gnu-v2-abi.h.
	* gnu-v2-abi.h: Remove.

2010-02-02  Tom Tromey  <[email protected]>

	* m2-typeprint.c (m2_record_fields): Don't use
	TYPE_DECLARED_TYPE.
	* gdbtypes.h (TYPE_DECLARED_CLASS): New macro.
	(struct main_type) <flag_declared_class>: New field.
	(struct cplus_struct_type) <declared_type>: Remove.
	<ntemplate_args>: Move earlier.
	(DECLARED_TYPE_CLASS, DECLARED_TYPE_UNION, DECLARED_TYPE_STRUCT)
	(DECLARED_TYPE_TEMPLATE): Remove.
	(TYPE_DECLARED_TYPE): Remove.
	* gdbtypes.c (lookup_union): Don't use TYPE_DECLARED_TYPE.
	* dwarf2read.c (read_structure_type): Set TYPE_DECLARED_CLASS.
	* c-typeprint.c (c_type_print_base): Use TYPE_DECLARED_CLASS, not
	TYPE_DECLARED_TYPE.

2010-02-02  Tom Tromey  <[email protected]>

	PR c++/11226, PR c++/9629, PR c++/9688, PR c++/8890:
	* valops.c (search_struct_field): Compute nbases after calling
	CHECK_TYPEDEF.
	(check_field): Call CHECK_TYPEDEF.
	* cp-valprint.c (cp_print_value): Pass correct address to
	baseclass_offset.  Fix check for virtual base past the end of the
	object.  Don't offset address passed to cp_print_value_fields or
	apply_val_pretty_printer.
	(cp_print_value_fields): Fix call to val_print.
	(cp_print_value_fields_rtti): New function.
	* c-valprint.c (c_val_print): Use cp_print_value_fields_rtti.
	* p-valprint.c (pascal_object_print_value_fields): Fix call to
	val_print.
	* python/py-prettyprint.c (apply_val_pretty_printer): Add embedded
	offset to address.
	* language.h (struct language_defn) <la_val_print>: Document.
	* c-lang.h (cp_print_value_fields_rtti): Declare.

2010-02-01  Jan Kratochvil  <[email protected]>

	PR libc/11214:
	* linux-low.c (linux_tracefork_child) [!(__UCLIBC__ && HAS_NOMMU)]: New.
	(linux_test_for_tracefork): Move `stack' into [__UCLIBC__ && HAS_NOMMU].
	(linux_test_for_tracefork) [!(__UCLIBC__ && HAS_NOMMU)]: New.

2010-02-01  Michael Matz  <[email protected]>
	    Daniel Jacobowitz  <[email protected]>

	* i386-tdep.c (i386_frame_cache): Assume valid anonymous
	functions use a frame pointer.

2010-02-01  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (scan_dyntag): New variable dyn_addr.  Replace gdb_assert
	by a conditional setting DYN_ADDR.  Use DYN_ADDR.
	* config/djgpp/fnchange.lst: Add translations for
	symbol-without-target_section.exp and symbol-without-target_section.c.

2010-02-01  Daniel Jacobowitz  <[email protected]>

	* gdbarch.sh: Set LANG and LC_ALL to C, not c.
	(remote_breakpoint_for_pc): Correct invalid_p check.
	* gdbarch.c: Regenerated.

2010-02-01  Daniel Jacobowitz  <[email protected]>

	* arm-tdep.c (arm_find_mapping_symbol): New function, from
	arm_pc_is_thumb.
	(arm_pc_is_thumb): Use arm_find_mapping_symbol.
	(extend_buffer_earlier): New function.
	(MAX_IT_BLOCK_PREFIX, IT_SCAN_THRESHOLD): New constants.
	(arm_adjust_breakpoint_address): New function.
	(arm_gdbarch_init): Register arm_adjust_breakpoint_address.

2010-02-01  Daniel Jacobowitz  <[email protected]>

	* arm-linux-tdep.c (arm_linux_thumb2_be_breakpoint)
	(arm_linux_thumb2_le_breakpoint): New constants.
	(arm_linux_init_abi): Set thumb2_breakpoint and
	thumb2_breakpoint_size.
	* arm-tdep.c (thumb_insn_size, thumb_advance_itstate): New functions.
	(thumb_get_next_pc): Add a comment.  Rename IT to ITSTATE.
	Implement support for single stepping through IT blocks if
	a 32-bit Thumb breakpoint instruction is available.
	(arm_breakpoint_from_pc): If a 32-bit Thumb breakpoint instruction
	is available, use it when needed.
	(arm_remote_breakpoint_from_pc): New function.
	(arm_gdbarch_init): Register arm_remote_breakpoint_from_pc.
	* arm-tdep.h (struct gdbarch_tdep): Correct thumb_breakpoint
	comment.  Add thumb2_breakpoint and thumb2_breakpoint_size.

2010-02-01  Daniel Jacobowitz  <[email protected]>

	* arch-utils.c (default_remote_breakpoint_from_pc): New function.
	* arch-utils.h (default_remote_breakpoint_from_pc): Declare.
	* gdbarch.c, gdbarch.h: Regenerated.
	* gdbarch.sh (remote_breakpoint_from_pc): New architecture method.
	* remote.c (remote_insert_breakpoint, remote_insert_hw_breakpoint): Use
	gdbarch_remote_breakpoint_from_pc.

2010-01-29  Daniel Jacobowitz  <[email protected]>

	* infrun.c (prepare_to_proceed): Handle other signals which might
	match a breakpoint.
	(handle_inferior_event): Move the check for unusual breakpoint
	signals earlier.

2010-01-29  Paul Hilfinger  <[email protected]>

	amd64 - function returning record with field straddling 2 registers.
	* amd64-tdep.c (amd_classify_aggregate): Handle the case of
	a record of length <= 16 in which a field straddles the two
	eightbytes.

2010-01-29  Joel Brobecker  <[email protected]>

	Implement return values on amd64-windows.
	* amd64-windows-tdep.c: #include gdbcore.h and regcache.h.
	(amd64_windows_return_value): New function.
	(amd64_windows_init_abi): Call set_gdbarch_return_value with
	amd64_windows_return_value.

2010-01-29  Joel Brobecker  <[email protected]>

	amd64-windows: 32 bytes allocated on stack by caller for integer
	parameter registers.
	* i386-tdep.h (struct gdbarch_tdep): Add new field
	integer_param_regs_saved_in_caller_frame.
	* amd64-windows-tdep.c (amd64_windows_init_abi): Set
	tdep->integer_param_regs_saved_in_caller_frame to 1.
	* amd64-tdep.c (amd64_push_dummy_call): Allocate some memory on
	stack if tdep->integer_param_regs_saved_in_caller_frame is set.

2010-01-29  Joel Brobecker  <[email protected]>

	amd64-windows: memory args passed by pointer during function calls.
	* i386-tdep.h (gdbarch_tdep): Add field memory_args_by_pointer.
	* amd64-tdep.c (amd64_push_arguments): Add handling of architectures
	where tdep->memory_args_by_pointer is non-zero.
	* amd64-windows-tdep.c (amd64_windows_init_abi): Set
	tdep->memory_args_by_pointer to 1.

2010-01-29  Joel Brobecker  <[email protected]>

	amd64-windows: Integer parameters in function calls.
	* i386-tdep.h (enum amd64_reg_class): New, moved here from
	amd64-tdep.c.
	(struct gdbarch_tdep): Add fields call_dummy_num_integer_regs,
	call_dummy_integer_regs, and classify.
	* amd64-tdep.h (amd64_classify): Add declaration.
	* amd64-tdep.c (amd64_dummy_call_integer_regs): New static constant.
	(amd64_reg_class): Delete, moved to i386-tdep.h.
	(amd64_classify): Make non-static.  Move declaration to amd64-tdep.h.
	Replace call to amd64_classify by call to tdep->classify.
	(amd64_push_arguments): Get the list of registers to use for
	passing integer parameters from the gdbarch tdep structure,
	rather than using a hardcoded one.  Replace calls to amd64_classify
	by calls to tdep->classify.
	(amd64_push_dummy_call): Get the register number used for
	the "hidden" argument from tdep->call_dummy_integer_regs.
	(amd64_init_abi): Initialize tdep->call_dummy_num_integer_regs
	and tdep->call_dummy_integer_regs.  Set tdep->classify.
	* amd64-windows-tdep.c: Add include of gdbtypes.h.
	(amd64_windows_dummy_call_integer_regs): New static global.
	(amd64_windows_classify): New function.
	(amd64_windows_init_abi): Initialize tdep->call_dummy_num_integer_regs
	tdep->call_dummy_integer_regs and tdep->classify.

2010-01-28  Daniel Jacobowitz  <[email protected]>

	* regcache.c (regcache_xmalloc): Add aspace argument.  Use it
	for the new regcache.  All callers updated.
	(regcache_cpy, regcache_cpy_no_passthrough): Do not set aspace here.
	(get_thread_arch_regcache): Do not set aspace here.
	* regcache.h (regcache_xmalloc): Update declaration.

	* frame.c, infcall.c, ppc-linux-tdep.c: Calls to
	regcache_xmalloc updated.

2010-01-28  Joel Brobecker  <[email protected]>

	Another -Wunused-function error in procfs.c (sparc-solaris)
	* procfs.c (insert_dbx_link_breakpoint): Delete declaration.  Move up.
	Only define if SYS_syssgi is defined.
	(remove_dbx_link_breakpoint): Delete declaration.  Move up.
	(dbx_link_addr, insert_dbx_link_bpt_in_file)
	(insert_dbx_link_bpt_in_region): Move up.  Only define if SYS_syssgi
	is itself defined.

2010-01-27  Christopher Faylor  <[email protected]>

	* windows-nat.c (windows_initialization_done): New variable.
	(get_windows_debug_event): Issue error when process dies before
	completely initializing.
	(do_initial_windows_stuff): Set flag to indicate when we are done with
	the initial steps of attaching to the child.

2010-01-27  Jan Kratochvil  <[email protected]>

	* symtab.h (struct symbol <symtab>): New comment on NULL values.

2010-01-27  Doug Evans  <[email protected]>

	* solib-svr4.c (solib_break_names): Add __dl_rtld_db_dlactivity.

	* breakpoint.c (bpstat_stop_status): Delete useless code.

2010-01-27  Jan Kratochvil  <[email protected]>

	* printcmd.c (display_uses_solib_p): Remove variable section.  Access
	objfile via SYMBOL_SYMTAB.

2010-01-26  Tom Tromey  <[email protected]>

	PR exp/7643:
	* eval.c (evaluate_subexp_for_address) <UNOP_IND>: Call
	coerce_array on result.

2010-01-26  Sami Wagiaalla  <[email protected]>

	* cp-namespace.c (cp_lookup_symbol_namespace): Added
	search_parent argument.
	(cp_add_using): Initialize 'searched' field.
	(reset_directive_searched): New function.
	* cp-support.h: Add 'searched' field to using_direct struct.
	(cp_lookup_symbol_imports): Ditto.
	* cp-namespace.c (cp_lookup_symbol_imports): Ditto.
	Perform recursive search.
	Implement non parent search.
	* valops.c (value_maybe_namespace_elt): Updated.

2010-01-26  Sami Wagiaalla  <[email protected]>

	PR gdb/10929:
	* dwarf2read.c (read_lexical_block_scope): Create blocks for
	scopes which contain using directives even if they contain no
	declarations.
	* symtab.c (lookup_symbol_aux): Pass lowest level block to
	la_lookup_symbol_nonlocal.
	* cp-namespace.c (cp_lookup_symbol_nonlocal): call
	cp_lookup_symbol_namespace.
	(cp_lookup_symbol_namespace): Perform an import lookup at every
	block level.
	(cp_lookup_symbol_imports): New function.
	(cp_lookup_symbol_in_namespace): New function.

2010-01-25  Tom Tromey  <[email protected]>

	PR gdb/11049:
	* c-valprint.c (c_val_print): Fix test of extract_unsigned_integer
	result.

2010-01-25  Rainer Orth  <[email protected]>

	* configure.ac: Only use host_os part when disabling TUI on osf.
	Use test to check variables, prefix strings with x.
	* configure: Regenerate.

	* solib-osf.c (osf_current_sos): Initialize tail.

2010-01-25  gingold  <[email protected]>

        * windows-nat.c (windows_continue): Use %x to print thread id.
        (get_windows_debug_event): Ditto.

2010-01-22  Tom Tromey  <[email protected]>

	PR symtab/11199:
	* dwarf2read.c (quirk_gcc_member_function_pointer): Change return
	type and arguments.  Use smash_to_methodptr_type.
	(read_structure_type): Call quirk_gcc_member_function_pointer
	later.
	* gdbtypes.h (smash_to_methodptr_type): Declare.
	* gdbtypes.c (smash_to_methodptr_type): New function.
	(lookup_methodptr_type): Use it.

2010-01-21  Tom Tromey  <[email protected]>

	PR symtab/11198:
	* symtab.h (lookup_minimal_symbol_and_objfile): Declare.
	* minsyms.c (lookup_minimal_symbol_and_objfile): New function.
	* glibc-tdep.c (find_minsym_and_objfile): Remove.
	(glibc_skip_solib_resolver): Use
	lookup_minimal_symbol_and_objfile.

2010-01-21  Kai Tietz  <[email protected]>

	* inflow.c (check_syscall): Guard by #if clause for GO32 and
	WIN32 targets.

2010-01-20  Tom Tromey  <[email protected]>

	PR backtrace/10770:
	* valarith.c (value_binop): Handle BINOP_GTR, BINOP_LEQ, and
	BINOP_GEQ.  Handle BINOP_NOTEQUAL in the signed case.
	* dwarf2expr.c (new_dwarf_expr_context): Allocate
	dwarf_stack_values, not CORE_ADDRs.
	(execute_stack_op): Change DW_OP_div and comparison operators to
	use signed operands.

2010-01-20  Vladimir Prus  <[email protected]>

	Per-inferior args and tty and environment.

	* infcmd.c (inferior_args): Rename to ...
	(inferior_args_scratch): ... this.
	(inferior_io_terminal): Rename to ...
	(inferior_io_terminal_scratch): ... this.
	(inferior_argc, inferior_argv): Remove.
	(set_inferior_io_terminal, get_inferior_io_terminal): Store
	inside current_inferior().
	(set_inferior_tty_command, show_inferior_tty_command): New.
	(get_inferior_args, set_inferior_args): Store inside
	current_inferior().
	(notice_args_set): Likewise and rename to...
	(set_args_command): ... this.
	(set_inferior_args_vector): Likewise.
	(notice_args_read): Rename to...
	(show_args_command): ...new.
	(tty_command): Remove.
	(run_command_1): Don't free old args, as they are freed by
	set_inferior_arg now.
	(run_no_args_command): Likewise.
	(inferior_environ): Remove.
	(run_command_1): Use environment of the current inferior.
	(environment_info, set_environment_command)
	(unset_environment_command, path_info, path_command): Likewise.
	(_initialize_infcmd): Adjust for function and variable renames.
	Do not init inferior_environ.
	* inferior.h (set_inferior_arg): Adjust prototype.
	(struct inferior): New fields args, argc, argv, terminal, environment.
	(inferior_environ): Remove declaration.
	* inferior.c (free_inferior): Free new fields.
	(add_inferior_silent): Initialize 'environment' field.
	* main.c (captured_main): Set arguments only after the initial
	inferior has been created.  Set set_inferior_io_terminal,
	not tty_command.
	* mi/mi-main.c (mi_cmd_env_path): Use environment of the current
	inferior.
	(_initialize_mi_cmd_env): Adjust for disappearance of global
	inferior_environ.
	* solib.c (solib_find): Use environment of the current inferior.

2010-01-20  Jan Kratochvil  <[email protected]>

	* varobj.c (varobj_add_child, install_dynamic_child): Wrap into #if
	HAVE_PYTHON.
	(instantiate_pretty_printer): Move HAVE_PYTHON outside of the function.

2010-01-20  Joel Brobecker  <[email protected]>

	Get rid of ada-lang.c:function_name_from_pc.
	* ada-lang.c: Add "stack.h" #include.
	(function_name_from_pc): Delete.
	(is_known_support_routine): Replace call to function_name_from_pc
	by call to find_frame_funname.
	(ada_unhandled_exception_name_addr_from_raise): Likewise.

2010-01-19  Tom Tromey  <[email protected]>

	PR c++/11026:
	* dwarf2read.c (read_partial_die): Allocate partial DIE's name on
	objfile obstack.

2010-01-19  Tom Tromey  <[email protected]>

	* top.c (stop_sig, float_handler, do_nothing): Remove.

2010-01-19  Jan Kratochvil  <[email protected]>

	* breakpoint.c (watchpoint_check): Check the call
	gdbarch_in_function_epilogue_p before calling frame_find_by_id.
	Extend the comment.
	* config/djgpp/fnchange.lst: Add translations for 
	watchpoint-cond-gone.exp, watchpoint-cond-gone.c and
	watchpoint-cond-gone-stripped.c.

2010-01-19  Tom Tromey  <[email protected]>

	PR c++/8000:
	* dwarf2read.c (partial_die_parent_scope): Put enumeration type
	into parent scope, and enumerator into grandparent scope.

2010-01-19  Joel Brobecker  <[email protected]>

	* NEWS: Add entry for "set/show ada trust-PAD-over-XVS" commands.

2010-01-19  Joel Brobecker  <[email protected]>

	* configure.host: Make x86_64-*-solaris2.1[0-9]* an alias of
	i[34567]86-*-solaris2.1[0-9]*.
	* configure.tgt: Likewise.

2010-01-19  Joel Brobecker  <[email protected]>

	* NEWS: Document the source command enhancement allowing it
	to load Python scripts. Document the "set/show script-extension"
	commands.

2010-01-19  Joel Brobecker  <[email protected]>

	Add -Wunused-function to compile flags.
	* configure.ac: Add -Wunused-function to build_warnings.
	* configure: Regenerate.

2010-01-19  Joel Brobecker  <[email protected]>

	"delete" ada-lex.c:input function, not used.
	* ada-lex.l: #define YY_NO_INPUT.

2010-01-19  Joel Brobecker  <[email protected]>

	Delete free_named_symtabs and associated cleanup.
	* symfile.h (free_named_symtabs): Delete declaration.
	* symfile.c: Remove some commented out code (clear_symtab_users_once).
	(cashier_psymtab): Comment function out.
	Delete declaration.
	(free_named_symtabs): Delete.
	* coffread.c (coff_end_symtab): Remove call to free_named_symtabs.
	* dbxread.c (end_psymtab): Likewise.
	* dwarf2read.c (process_psymtab_comp_unit): Ditto.
	* exec.c (exec_close_1): Ditto.
	* xcoffread.c (xcoff_end_psymtab): Likewise.

2010-01-19  Joel Brobecker  <[email protected]>

	* stack.c (print_block_frame_labels): Comment function out.

2010-01-19  Joel Brobecker  <[email protected]>

	Delete unused or undefined functions.
	* breakpoint.c (ep_parse_optional_filename): Delete.
	* dcache.c (dcache_write_line): Remove declaration.
	* infrun.c (build_infrun): Remove declaration.
	* tracepoint.c (tracepoint_save_command): Remove declaration.
	* linux-nat.c (init_lwp_list): Delete. No longer used.
	* event-loop.c (check_async_signal_handlers): Delete declaration.
	* infrun.c (init_execution_control_state): Delete.
	(proceed): Update comment to avoid mentioning
	init_execution_control_state.
	* target.c (kill_or_be_killed, nosupport_runtime): Delete.
	* ada-lang.c (ada_to_static_fixed_value): Delete.
	* scm-lang.c (evaluate_subexp_scm): Delete declaration.
	* cp-namespace.c (cp_copy_usings): Delete.
	* xml-syscall.c (xml_number_of_syscalls): Delete.
	* progspace.c (find_program_space_by_num): Delete.
	* inflow.c (handle_sigio): Delete declaration.
	* hppa-tdep.c (hppa_alignof): Delete.
	* mipsnbsd-tdep.c (mipsnbsd_sigtramp_offset)
	(mipsnbsd_core_osabi_sniffer): Delete.

2010-01-18  Tom Tromey  <[email protected]>

	PR c++/9680:
	* c-exp.y (REINTERPRET_CAST, DYNAMIC_CAST, STATIC_CAST)
	(CONST_CAST): New tokens.
	(exp): Add new productions.
	(ident_tokens): Add const_cast, dynamic_cast, static_cast, and
	reinterpret_cast.
	(is_cast_operator): New function.
	(yylex): Handle cast operators specially.
	* eval.c (evaluate_subexp_standard) <UNOP_DYNAMIC_CAST,
	UNOP_REINTERPRET_CAST>: New cases.
	* expprint.c (print_subexp_standard): Likewise.
	(op_name_standard): Likewise.
	(dump_subexp_body_standard): Likewise.
	* parse.c (operator_length_standard): Likewise.
	* expression.h (enum exp_opcode): New constants UNOP_DYNAMIC_CAST,
	UNOP_REINTERPRET_CAST.
	* gdbtypes.c (class_types_same_p): New function.
	(is_ancestor): Use it.
	(is_public_ancestor): New function.
	(is_unique_ancestor_worker): Likewise.
	(is_unique_ancestor): Likewise.
	* gdbtypes.h (class_types_same_p, is_public_ancestor)
	(is_unique_ancestor): Declare.
	* valops.c (value_reinterpret_cast): New function.
	(dynamic_cast_check_1): Likewise.
	(dynamic_cast_check_2): Likewise.
	(value_dynamic_cast): Likewise.
	* value.h (value_reinterpret_cast, value_dynamic_cast): Declare.

2010-01-18  Joel Brobecker  <[email protected]>

	Fix build failure when building without Python support.
	* python/python.c: Always include exceptions.h, even when HAVE_PYTHON
	is not defined.

2010-01-18  Joel Brobecker  <[email protected]>

	Use XVS field type instead of doing a parallel lookup.
	* ada-lang.c (ada_get_base_type): Follow the XVS field type
	if it is a reference type instead of doing a type lookup using
	the XVS field name.

2010-01-18  Joel Brobecker  <[email protected]>

	Trust PAD types instead of using PAD___XVS.
	* ada-lang.c (trust_pad_over_xvs): New static variable.
	(ada_is_aligner_type): If !trust_pad_over_xvs and there is a
	parallel XVS type, follow the XVS type instead of the PAD type.
	(unwrap_value): Make sure that there is no parallel XVE type
	before returning the value as is.
	(set_ada_list, show_ada_list): New static variables.
	(set_ada_command, show_ada_command): New functions.
	(_initialize_ada_language): Add new "set/show ada" prefix commands.
	Add new "set/show ada trust-PAD-over-XVS" setting.

2010-01-18  Tom Tromey  <[email protected]>
	    Thiago Jung Bauermann  <[email protected]>

	Allow "source" to load python scripts.
	* exceptions.h (enum errors): Add UNSUPPORTED_ERROR.
	* python/python.c (source_python_script): New function.
	* python/python.h (source_python_script): Add declaration.
	* cli/cli-cmds.c: #include exceptions.h and python/python.h.
	(script_ext_off, script_ext_soft, script_ext_strict)
	(script_ext_enums, script_ext_mode): New static constants.
	(show_script_ext_mode, find_and_open_script): New functions.
	(source_script): Enhance to handle Python scripts.
	(init_cli_cmds): Add set/show script-extension commands.

2010-01-16  Stan Shebs  <[email protected]>

	* tracepoint.h (struct trace_status): Use unsigned long long
	instead of size_t.
	* tracepoint.c (trace_status_command): Fix printf directive.
	(trace_save_command): Check fwrite returns, fix printf directive.
	(trace_filename): New global.
	(tfile_open): Set it, check read returns.
	(tfile_close): Free trace_filename.
	(tfile_get_traceframe_address): Check read returns.
	(tfile_trace_find): Ditto.
	(tfile_fetch_registers): Ditto.
	(tfile_xfer_partial): Ditto.
	(tfile_get_trace_state_variable_value): Ditto.

2010-01-15  Stan Shebs  <[email protected]>

	Add trace file support.
	* tracepoint.h (enum trace_stop_reason): New enum.
	(struct trace_status): New struct.
	(parse_trace_status): Declare.
	(struct uploaded_tp): Move here from remote.c,
	add fields for actions.
	(struct uploaded_tsv): New struct.
	* tracepoint.c (tfile_ops): New target vector.
	(trace_fd): New global.
	(tfile_open): New function.
	(tfile_close): New function.
	(tfile_files_info): New function.
	(tfile_get_trace_status): New function.
	(tfile_get_traceframe_address): New function.
	(tfile_trace_find): New function.
	(tfile_fetch_registers): New function.
	(tfile_xfer_partial): New function.
	(tfile_get_trace_state_variable_value): New function.
	(init_tfile_ops): New function.
	(_initialize_tracepoint): Call it, add tfile target.
	(trace_status): New global.
	(current_trace_status): New function.
	(trace_running_p): Remove, change all users to get from
	current_trace_status()->running.
	(get_trace_status): Remove.
	(trace_status_command): Call target_get_trace_status directly,
	report more detail including tracing stop reasons.
	(trace_find_command): Always allow tfind on a file.
	(trace_find_pc_command): Ditto.
	(trace_find_tracepoint_command): Ditto.
	(trace_find_line_command): Ditto.
	(trace_find_range_command): Ditto.
	(trace_find_outside_command): Ditto.
	(trace_frames_offset, cur_offset): Declare as off_t.
	(trace_regblock_size): Rename from reg_size, update users.
	(parse_trace_status): New function.
	(tfile_interp_line): New function.
	(disconnect_or_stop_tracing): Ensure current trace
	status before asking what to do.
	(stop_reason_names): New global.
	(trace_save_command): New command.
	(get_uploaded_tp): Move here from remote.c.
	(find_matching_tracepoint): Ditto.
	(merge_uploaded_tracepoints): New function.
	(parse_trace_status): Use stop_reason_names.
	(_initialize_tracepoint): Define tsave command.
	* target.h (target_ops): New fields to_save_trace_data,
	to_upload_tracepoints, to_upload_trace_state_variables,
	to_get_raw_trace_data, change to_get_trace_status
	to take a pointer to a status struct.
	(target_save_trace_data): New macro.
	(target_upload_tracepoints): New macro.
	(target_upload_trace_state_variables): New macro.
	(target_get_raw_trace_data): New macro.
	* target.c (update_current_target): Add new methods, change
	signature of to_get_trace_status.
	* remote.c (hex2bin): Make globally visible.
	(bin2hex): Ditto.
	(remote_download_trace_state_variable): Download name also.
	(remote_get_trace_status): Update parameter, use
	parse_trace_status.
	(remote_save_trace_data): New function.
	(remote_upload_tracepoints): New function.
	(remote_upload_trace_state_variables): New function.
	(remote_get_raw_trace_data): New function.
	(remote_start_remote): Use them.
	(_initialize_remote_ops): Add operations.
	* ax-gdb.c: Include breakpoint.h.
	* breakpoint.c (create_tracepoint_from_upload): Use
	break_command_really, return tracepoint, warn about unimplemented
	parts.
	* NEWS: Mention trace file addition.

2010-01-15  Jan Kratochvil  <[email protected]>

	Fix compilation warning on gcc-3.4.
	* exec.c (print_section_info): Move the `displacement' variable
	initialization to its declaration.

2010-01-15  Jan Kratochvil  <[email protected]>

	* gdb-gdb.py (StructMainTypePrettyPrinter): Fix TYPE_CODE_RANGE
	comparison.

2010-01-15  Eric Botcazou  <[email protected]>

	"info tasks" broken by typedefs in ATCB type definitions.
	* ada-lang.c (ada_template_to_fixed_record_type_1): Add call to
	ada_check_typedef before retrieving the length of the type for
	regular fields.

2010-01-15  Joel Brobecker  <[email protected]>

	Do not use name-based lookup for unconstrained packed arrays.
	* ada-lang.c (find_parallel_type_by_descriptive_type):
	Limit the fallback to name-based lookups to the case where
	the type is a constrained packed array.

2010-01-15  Joel Brobecker  <[email protected]>

	Enhance gdb-gdb.py to handle main_type.type_specific.
	* gdb-gdb.py: Print the type-specific part of struct main_type.

2010-01-15  Jan Kratochvil  <[email protected]>

	* configure.ac (AC_CHECK_FUNCS): Check for setrlimit and getrlimit.
	* configure: Regenerate.
	* config.in: Regenerate.
	* utils.c: Include sys/resource.h.
	(dump_core, can_dump_core): New.
	(internal_vproblem): Update the comment.  Check can_dump_core while
	setting dump_core_p.  Replace two abort calls by dump_core calls.

2010-01-14  Jan Kratochvil  <[email protected]>
	    Eli Zaretskii  <[email protected]>

	* NEWS: Document the PIE support.

2010-01-14  Jan Kratochvil  <[email protected]>

	* linux-tdep.c: Remove includes gdbcore.h, observer.h and elf-bfd.h.
	(check_is_pie_binary, _initialize_linux_tdep): Remove.

2010-01-14  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (svr4_exec_displacement): New comment for entry_point.
	Replace exec_entry_point call by bfd_get_start_address.

2010-01-14  Jan Kratochvil  <[email protected]>

	Support Valgrind attachments broken by the PIE support.
	* auxv.c: Include gdbcore.h.
	(procfs_xfer_auxv): Make static.  Reduce its comment.  Drop its
	parameters ops, object and annex.  Remove their assertions.
	(ld_so_xfer_auxv, memory_xfer_auxv): New function.
	* auxv.h (procfs_xfer_auxv): Remove comment.  Rename to ...
	(memory_xfer_auxv): ... here.
	* linux-nat.c (linux_xfer_partial): Rename procfs_xfer_auxv to
	memory_xfer_auxv.
	* procfs.c (procfs_xfer_partial): Likewise.
	* solib-svr4.c (svr4_relocate_main_executable): New prototype.
	(svr4_special_symbol_handling): Call svr4_relocate_main_executable.
	(svr4_solib_create_inferior_hook): Conditionalize the
	svr4_relocate_main_executable call.

2010-01-14  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (scan_dyntag): Remove variable dyn_addr.  New variable
	target_section.  Find SECT in current_target_sections, gdb_assert it.
	(elf_lookup_lib_symbol): Pass the binary file if given symfile_objfile.
	New variable abfd.
	* symtab.c (lookup_objfile_from_block): Return the binary file instead
	of separate debug info file.

2010-01-14  Jan Kratochvil  <[email protected]>

	Support PIEs with no symfile_objfile.
	* exec.c (print_section_info <abfd == exec_bfd>): Relocate Entry point.
	* solib-svr4.c (svr4_relocate_main_executable <exec_bfd>): New block.

2010-01-14  Jan Kratochvil  <[email protected]>

	* solib-svr4.c (svr4_relocate_main_executable): Move the static exec
	code part to ...
	(svr4_static_exec_displacement): ... a new function.
	(svr4_exec_displacement): New function.
	(svr4_relocate_main_executable): Call svr4_exec_displacement.  Allocate
	new_offsets using alloca now.  Remove variable old_chain and changed.
	Call objfile_relocate unconditionally now.

2010-01-14  Doug Evans  <[email protected]>

	* gdbtypes.c (arch_flags_type): Fix comment.
	* gdbtypes.h (arch_composite_type): Fix comment.

2009-01-14  Tristan Gingold  <[email protected]>

	* machoread.c (macho_add_oso_symfile): Add symfile_flags parameter.
	Call xstrdup for abfd->filename.  Pass symfile_flags and objfile flags
	to symbol_file_add_from_bfd.  Add OSO as separate objfile.
	(macho_oso_symfile): Add symfile_flags parameter.  Pass it to
	macho_add_oso_symfile.
	(macho_symfile_read): Pass symfile_flags to macho_oso_symfile.

2010-01-14  Joel Brobecker  <[email protected]>

	Tru64: Dead threads are never deleted.
	* dec-thread.c (dec_thread_ptid_is_alive): New function.
	(dec_thread_count_gdb_threads): Fix counter increment.
	(dec_thread_add_gdb_thread): Fix *listp increment.
	(resync_thread_list): Fix bug in deletion of dead threads that
	caused all threads to be deleted, instead of just the dead ones.

2010-01-13  Phil Muldoon  <[email protected]>

	PR python/10705

	* python/python-internal.h: Add lazy_string_object_type
	definition.
	(create_lazy_string_object, gdbpy_initialize_lazy_string)
	(gdbpy_is_lazystring, gdbpy_extract_lazy_string): Define.
	* python/py-value.c (valpy_lazy_string): New function.
	(convert_value_from_python): Add lazy string conversion.
	* python/py-prettyprint.c (pretty_print_one_value): Check if
	return is also a lazy string.
	(print_string_repr): Add lazy string printing branch.
	(print_children): Likewise.
	* python/py-lazy-string.c: New file. Implement lazy strings.
	* python/python.c (_initialize_python): Call
	gdbpy_initialize_lazy_string.
	* varobj.c (value_get_print_value): Add lazy string printing
	branch.  Account for encoding.
	* c-lang.c (c_printstr): Account for new encoding argument.  If
	encoding is NULL, find encoding suited for type, otherwise use
	user encoding.
	* language.h (language_defn): Add encoding argument.
	(LA_PRINT_STRING): Likewise.
	* language.c (unk_lang_printstr): Update to reflect new encoding
	argument to language_defn.
	* ada-lang.h (ada_printstr): Likewise.
	* c-lang.h (c_printstr): Likewise.
	* p-lang.h (pascal_printstr);
	* f-lang.c (f_printstr): Likewise.
	* m2-lang.c (m2_printstr): Likewise.
	* objc-lang.c (objc_printstr): Likewise.
	* p-lang.c (pascal_printstr): Likewise.
	* scm-lang.c (scm_printstr): Likewise.
	* c-valprint.c (c_val_print): Update LA_PRINT_STRING call for
	encoding argument.
	* ada-valprint.c (ada_printstr): Likewise.
	* f-valprint.c (f_val_print): Likewise
	* m2-valprint.c (m2_val_print): Likewise.
	* p-valprint.c (pascal_val_print): Likewise.
	* expprint.c (print_subexp_standard): Likewise.
	* valprint.c (val_print_string): Likewise.
	* Makefile.in (SUBDIR_PYTHON_OBS): Add py-lazy-string.
	(SUBDIR_PYTHON_SRCS): Likewise.
	(py-lazy-string.o): New rule.

2010-01-13  Doug Evans  <[email protected]>

	* mi/mi-main.c (list_available_thread_groups): Avoid "may be used
	uninitialized" warning from gcc on local `tree'.

2010-01-13  Vladimir Prus  <[email protected]>

	Implement core awareness.

	* bcache.c (compare_ints): Remove
	(print_percentage): Use compare_positive_ints.
	* defs.h (compare_positive_ints): Declare.
	* linux-nat.h (struct lin_lwp): New field core.
	(linux_nat_core_of_thread_1): Declare.
	* linux-nat.c (add_lwp): Init the 'core' field.
	(linux_nat_wait_1): Record the core.
	(linux_nat_core_of_thread_1, linux_nat_core_of_thread): New.
	(linux_nat_add_target): Register the above.
	* linux-thread-db.c (update_thread_core): New.
	(thread_db_find_new_threads): Update core information for
	every thread.
	* remote.c (struct private_thread_info): New.
	(free_private_thread_info, demand_private_info): New.
	(PACKET_qXfer_threads, use_osdata_threads): New.
	(struct thread_item, threads_parsing_context
	(start_thread, end_thread, thread_attributes)
	(thread_children, threads_children, threads_elements): New.
	(remote_threads_info): Try qXfer:threads before anything
	else.
	(remote_protocol_packets): Register qXfer:threads.
	(remote_open_1): Init use_osdata_threads.
	(struct stop_reply): New field 'core'.
	(remote_parse_stop_reply): Parse core number.
	(process_stop_reply): Record core number.
	(remote_xfer_partial): Handle qXfer:threads.
	(remote_core_of_thread): New.
	(init_remote_ops): Register remote_core_of_thread.
	(_initialize_remote): Register qXfer:read.
	* target.c (target_core_of_thread): New
	* target.h (enum target_object): New value TARGET_OBJECT_THREADS.
	(struct target_ops): New field to_core_of_threads.
	(target_core_of_thread): Declare.
	* gdbthread.h (struct thread_info): New field private_dtor.
	* thread.c (print_thread_info): Report the core.
	* ui-out.c (MAX_UI_OUT_LEVELS): Increase.
	* utils.c (compare_positive_ints): New.
	* features/threads.dtd: New.
	* mi/mi-interp.c (mi_on_normal_stop): Report the core.
	* mi/mi-main.c (struct collect_cores_data, collect_cores)
	(do_nothing, free_vector_of_osdata_items)
	(splay_tree_int_comparator, free_splay_tree): New.
	(print_one_inferior_data): Implemented printing of selected
	inferiors.  Collect and print cores.
	(output_cores): New.
	(mi_cmd_list_thread_groups): Support --recurse.  Permit specifying
	thread groups together with --available.

2010-01-12  Jan Kratochvil  <[email protected]>

	* configure: Regenerate (for _STRUCTURED_PROC).

2010-01-12  Joel Brobecker  <[email protected]>

	Delete dead function.
	* ada-lang.c (extract_string): Delete.  No longer used.

2010-01-12  Joel Brobecker  <[email protected]>

	Fix -Wunused warning in dec-thread.c.
	* dec-thread.c (dec_thread_count_gdb_threads)
	(dec_thread_add_gdb_thread): Prevent -Wunused warning.

2010-01-12  Joel Brobecker  <[email protected]>

	* ada-valprint.c (ada_print_floating): Remove trailing space.

2010-01-12  Joel Brobecker  <[email protected]>

	Add support for DW_AT_GNAT_descriptive_type.
	* gdbtypes.h (enum type_specific_kind): New enum.
	(struct main_type) [type_specific_field]: New component.
	[type_specific]: Add new component "gnat_stuff".
	(struct gnat_aux_type): New type.
	(INIT_CPLUS_SPECIFIC): Also set TYPE_SPECIFIC_FIELD (type).
	(HAVE_CPLUS_STRUCT): Also check TYPE_SPECIFIC_FIELD (type).
	(gnat_aux_default, allocate_gnat_aux_type): Add declaration.
	(INIT_GNAT_SPECIFIC, ALLOCATE_GNAT_AUX_TYPE, HAVE_GNAT_AUX_INFO)
	(TYPE_SPECIFIC_FIELD): New macros.
	(TYPE_CPLUS_SPECIFIC): Return cplus_struct_default if the given
	type does not hold any cplus-specific data.
	(TYPE_RAW_CPLUS_SPECIFIC): New macro.
	(TYPE_GNAT_SPECIFIC, TYPE_DESCRIPTIVE_TYPE): New macros.
	(TYPE_IS_OPAQUE): Use HAVE_CPLUS_STRUCT to check if type has
	cplus-specific data.
	* gdbtypes.c (allocate_cplus_struct_type): Minor stylistic rewrite.
	Set new component TYPE_SPECIFIC_FIELD (type).
	(gnat_aux_default): New constant.
	(allocate_gnat_aux_type): New function.
	(init_type): Add initialization the type-specific stuff for
	TYPE_CODE_FLT and TYPE_CODE_FUNC types.
	(print_gnat_stuff): New function.
	(recursive_dump_type): Use HAVE_CPLUS_STRUCT to check for cplus-
	specific data.  Adjust code that prints the contents of the
	type-specific union using the TYPE_SPECIFIC_FIELD value.
	* dwarf2read.c (dwarf2_attach_fields_to_type): Do not allocate
	the type cplus stuff for Ada types.
	(dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
	Error out if these routines are called with an Ada type.
	(read_structure_type, read_array_type, read_subrange_type):
	Add call to set_descriptive_type.
	(set_die_type): Initialize the gnat-specific data if necessary.
	(need_gnat_info, die_descriptive_type, set_descriptive_type):
	New functions.
	* ada-lang.c (decode_constrained_packed_array_type): Use
	decode_constrained_packed_array_type instead of doing a standard
	lookup to locate a parallel type.
	(find_parallel_type_by_descriptive_type): New function.
	(ada_find_parallel_type_with_name): New function.
	(ada_find_parallel_type): Reimplement using
	ada_find_parallel_type_with_name.
	* ada-valprint.c (print_field_values): Use HAVE_CPLUS_STRUCT
	to check if type has a cplus stuff.
	* linespec.c (total_number_of_methods): Likewise.
	* mdebugread.c (new_type): Likewise.

2010-01-11  Jan Kratochvil  <[email protected]>

	* NEWS: Document the 0b binary number prefix parsing.

2010-01-11  Jan Kratochvil  <[email protected]>

	* objfiles.c (objfile_relocate1): Change the return type to int.
	Describe the new return value.  Return non-zero if data changed.
	(objfile_relocate): New variable changed.  Set it.  Call
	breakpoint_re_set depending on CHANGED.

2010-01-11  Jan Kratochvil  <[email protected]>

	Implement binary numbers parsing.
	* c-exp.y (parse_number): New case 'b' and 'B'.

2010-01-11  Jan Kratochvil  <[email protected]>
	    Tristan Gingold  <[email protected]>

	* solib.c (info_sharedlibrary_command): Replace
	objfile_has_partial_symbols and objfile_has_full_symbols calls by
	objfile_has_symbols.

2010-01-10  Joel Brobecker  <[email protected]>

	* NEWS: Document the improvements made to the mips-irix port.

2010-01-09  Joel Brobecker  <[email protected]>

	Fix the documentation of valprint.c:value_print.
	* valprint.c (value_print): Update the function description to
	mention that the syntax of the output follows the current_language,
	not necessarily C.

2010-01-09  Jan Kratochvil  <[email protected]>

	Fix displacement of separate debug info files.
	* objfiles.c (objfile_relocate): Rename to ...
	(objfile_relocate1): ... here and make it static.  Extend the comment.
	(objfile_relocate): New function.
	* solib-spu.c (spu_relocate_main_executable): Explicitly check if
	SYMFILE_OBJFILE is NULL.  Remove variables objfile and old_chain.
	Remove following of SEPARATE_DEBUG_OBJFILE.  new_offsets is now
	allocated using alloca.
	* symfile.c (copy_section_addr_info): Remove.
	(build_section_addr_info_from_objfile): Make it global.  New variables
	addr_bit and mask, use them.
	* symfile.h (build_section_addr_info_from_objfile): New prototype.
	(copy_section_addr_info): Remove.

2010-01-09  Joel Brobecker  <[email protected]>

	Signal unwinder for mips-irix N32.
	* mips-irix-tdep.c: #include mips-tdep.h, trad-frame.h, and
	tramp-frame.h.
	(SIGTRAMP_FRAME_SIZE, SIGCONTEXT_PC_OFF, SIGCONTEXT_REGS_OFF)
	(SIGCONTEXT_FPREGS_OFF, SIGCONTEXT_FPCSR_OFF, SIGCONTEXT_HI_OFF)
	(SIGCONTEXT_LO_OFF): New macros. 
	(mips_irix_n32_tramp_frame_init): New function. 
	(mips_irix_n32_tramp_frame): New static constant.
	(mips_irix_init_abi): Prepend the mips_irix_n32_tramp_frame unwinder.

2010-01-09  Joel Brobecker  <[email protected]>

	Breakpoint in shared library does not work on mips-irix.
	* procfs.c: #include "observer.h".
	(procfs_inferior_created): New function, moving here the code
	which unsets the syssgi syscall-exit notifications.
	(procfs_create_inferior): Remove the code which unsets the syssgi
	syscall-exit notifications. It is too early to do this here.
	(_initialize_procfs): Attach the procfs_inferior_created observer.

2010-01-09  Joel Brobecker  <[email protected]>

	Wrong return convention for arrays (mips-irix).
	* mips-tdep.c (mips_n32n64_return_value): Arrays whose size is
	128 bits or smaller are returned the same way as structs
	and unions of the the same size.

2010-01-09  Joel Brobecker  <[email protected]>

	Cannot set the PC on mips-irix.
	* irix5-nat.c (fill_gregset): Check regno against the raw PC
	register number, no the cooked one.

2010-01-09  Joel Brobecker  <[email protected]>

	Error while loading core file on mips-irix.
	* solib-irix.c (irix_solib_create_inferior_hook): Do nothing
	if debugging from a core file.

2010-01-09  Joel Brobecker  <[email protected]>

	GDB hangs when attaching to process on mips-irix.
	* solib-irix.c (irix_solib_create_inferior_hook): Do nothing if
	attaching to a process.

2010-01-09  Joel Brobecker  <[email protected]>

	Use the correct breakpoint instruction on mips-irix.
	* mips-tdep.c (mips_breakpoint_from_pc): Add new static variable
	containing the correct breakpoint instruction to use on mips-irix.
	Use it when the osabi is GDB_OSABI_IRIX.

2010-01-09  Joel Brobecker  <[email protected]>

	-Wunused warning in procfs.c (mips-irix only).
	* procfs.c (gdb_praddset, gdb_prdelset): New macros.  Use them
	throughout instead of using praddset and prdelset respectively.

2010-01-09  Joel Brobecker  <[email protected]>

	GDB crash while stepping into function.
	* infrun.c (handle_inferior_event): Refetch the current frame
	after handling what.main_action, in case that pointer became
	dangling.

2010-01-09  Joel Brobecker  <[email protected]>

	Fix build failure of solaris-hosted cross debuggers.
	* ada-valprint.c, parse.c: Include defs.h before including ctype.h.

2010-01-09  Daniel Gutson  <[email protected]>

	Fix build failure on sparc-solaris.
	* procfs.c: (procfs_do_thread_registers) Use elfcore_write_lwpstatus.

2010-01-08  Jan Kratochvil  <[email protected]>

	Move some symfile code into subroutines.
	* symfile.h (relative_addr_info_to_section_offsets)
	(addr_info_make_relative): New prototypes.
	* symfile.c (default_symfile_offsets): Move a part to ...
	(relative_addr_info_to_section_offsets): ... this new function.
	(default_symfile_offsets): Call it.
	(syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
	this part to ...
	(addr_info_make_relative): ... this new function.

2010-01-08  Jan Kratochvil  <[email protected]>

	Add from_tty to solib_create_inferior_hook.
	* infcmd.c (post_create_inferior): Move solib_add after
	solib_create_inferior_hook.  Pass from_tty to
	solib_create_inferior_hook.  Call solib_add and SOLIB_ADD with
	0 from_tty and comment why.
	* infrun.c (follow_exec): Pass from_tty solib_create_inferior_hook as 0.
	* linux-nat.c (linux_child_follow_fork): Likewise.
	* nto-procfs.c (procfs_post_attach, procfs_create_inferior): Likewise.
	* solib-darwin.c (darwin_solib_create_inferior_hook): New parameter
	from_tty.
	* solib-frv.c (frv_solib_create_inferior_hook): Likewise.
	* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
	* solib-null.c (null_solib_create_inferior_hook): Likewise.
	* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
	* solib-pa64.c (pa64_solib_create_inferior_hook): Likewise.
	* solib-som.c (som_solib_create_inferior_hook): Likewise.
	* solib-spu.c (spu_solib_create_inferior_hook): New parameter from_tty.
	Pass it to svr4_so_ops.solib_create_inferior_hook.
	* solib-sunos.c (sunos_solib_create_inferior_hook): New parameter
	from_tty.
	* solib-svr4.c (enable_break): New parameter from_tty.  Pass it to
	solib_add.
	(svr4_solib_create_inferior_hook): New parameter from_tty.  Pass it to
	enable_break.
	* solib-target.c (solib_target_solib_create_inferior_hook): New
	parameter from_tty.
	* solib.c (solib_create_inferior_hook): New parameter from_tty.  Pass
	it to ops->solib_create_inferior_hook.
	(reload_shared_libraries): Pass from_tty to solib_create_inferior_hook.
	Move solib_add after solib_create_inferior_hook, call it now with
	from_tty as 0.  New comment there.
	* solib.h (solib_create_inferior_hook): New parameter from_tty.
	* solist.h (struct target_so_ops <solib_create_inferior_hook>):
	Likewise.

2010-01-08  Vladimir Prus  <[email protected]>

	Fix multiexec race.
	* infrun.c (handle_inferior_event): Use get_thread_regcache
	with events ptid, not get_current_regcache.

2009-01-08  Joel Brobecker  <[email protected]>

	GDB crash with empty executable name (MinGW).
	* source.c (openp): Add assert that parameter string is not NULL.
	if parameter string is an empty string, then return with a failure
	immediately.

2009-01-08  Joel Brobecker  <[email protected]>

	Get rid of support for VAX Floats.
	* ada-lang.h (ada_is_vax_floating_type, ada_vax_float_type_suffix)
	(ada_vax_float_print_function): Delete.
	* ada-lang.c (ada_is_vax_floating_type, ada_vax_float_type_suffix)
	(ada_vax_float_print_function): Delete.
	* ada-typeprint.c (print_vax_floating_point_type): Delete.
	(ada_print_type): Remove support for VAX floats.
	* ada-valprint.c (ada_val_print_1): Remove support for VAX floats.

2010-01-08  Jan Kratochvil  <[email protected]>

	* stabsread.c (read_args): Handle zero arguments.

2009-01-08  Joel Brobecker  <[email protected]>

	Cannot find in-tree libiconv.a after reconfigure.
	* acinclude.m4 (AM_ICONV): If we find an in-tree libiconv.a
	that we can use, then cache the path to this archive.
	* configure: Regenerate.

2010-01-07  Stan Shebs  <[email protected]>

	Make tracepoint operations go through target vector.
	* target.h (enum trace_find_type): New enum.
	(struct target_ops): New fields to_trace_init,
	to_download_tracepoint, to_download_trace_state_variable,
	to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
	to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
	to_set_disconnected_tracing.
	(target_trace_init): New macro.
	(target_download_tracepoint): New macro.
	(target_download_trace_state_variable): New macro.
	(target_trace_start): New macro.
	(target_trace_set_readonly_regions): New macro.
	(target_get_trace_status): New macro.
	(target_trace_stop): New macro.
	(target_trace_find): New macro.
	(target_get_trace_state_variable_value): New macro.
	(target_set_disconnected_tracing): New macro.
	* target.c (update_current_target): Inherit and set defaults for
	tracepoint operations.
	* tracepoint.c (default_collect): Make globally visible.
	(target_is_remote): Remove, along with all calls.
	(tvariables_info): Call target_get_trace_state_variable_value.
	(remote_set_transparent_ranges): Remove.
	(trace_start_command): Call target_trace_init,
	target_download_tracepoint, etc.
	(download_tracepoint): Remove.
	(trace_stop_command): Simplify.
	(stop_tracing): Call target_trace_stop.
	(get_trace_status): Call target_get_trace_status.
	(trace_status_command): Add case for targets that cannot trace.
	(finish_tfind_command): Change to take numerical arguments, call
	target_trace_find.
	(trace_find_command): Update call to finish_tfind_command.
	(trace_find_pc_command): Ditto.
	(trace_find_tracepoint_command): Ditto.
	(trace_find_line_command): Ditto.
	(trace_find_range_command): Ditto.
	(trace_find_outside_command): Ditto.
	(set_disconnected_tracing_value): Call
	target_set_disconnected_tracing.
	* remote.c: Add protocol encoding bits from tracepoint.c.
	(trace_error): Move from tracepoint.c.
	(remote_get_noisy_reply): Ditto.
	(free_actions_list_cleanup_wrapper): Ditto.
	(free_actions_list): Ditto.
	(remote_trace_init): New function.
	(remote_download_tracepoint): New function.
	(remote_download_trace_state_variable): New function.
	(remote_trace_set_readonly_regions): New function.
	(remote_trace_start): New function.
	(remote_get_trace_status): New function.
	(remote_trace_stop): New function.
	(remote_trace_find): New function.
	(remote_download_trace_state_variable): New function.
	(remote_set_disconnected_tracing): New function.
	(init_remote_ops): Add tracepoint operations.

	* tracepoint.c (trace_dump_command): Don't decr_pc_after_break.

2010-01-07  Tristan Gingold  <[email protected]>

	* symfile.c (build_section_addr_info_from_objfile): New function.
	(symbol_file_add_separate): Don't use offsets from objfile but
	built an addr info.

2010-01-06  Stan Shebs  <[email protected]>

	Support disconnected tracing.
	* infcmd.c (detach_command): Ask whether to stop tracing.
	* cli/cli-cmds.c (quit_command): Ditto.
	* breakpoint.h (struct breakpoint): New field number_on_target.
	* breakpoint.c (create_tracepoint_from_upload): New function.
	(get_tracepoint_by_number_on_target): New function.
	* remote.c (struct remote): New field disconnected_tracing.
	(remote_disconnected_tracing_feature): New function.
	(remote_protocol_features): Add DisconnectedTracing.
	(struct uploaded_tp): New struct.
	(uploaded_tps): New global.
	(get_uploaded_tp): New function.
	(find_matching_tracepoint): New function.
	(remote_get_tracing_state): New function.
	(remote_start_remote): Call it.
	* tracepoint.c (disconnected_tracing): New global.
	(trace_start_command): Initialize number_on_target.
	(stop_tracing): New function, split out from...
	(trace_stop_command): Call stop_tracing.
	(get_trace_status): New function, split out from...
	(trace_status_command): Call get_trace_status, add info on
	disconnection behavior.
	(disconnect_or_stop_tracing): New function.
	(finish_tfind_command): Translate from number on target.
	(trace_find_tracepoint_command): Translate to number on target.
	(send_disconnected_tracing_value): New function.
	(set_disconnected_tracing): New function.
	(_initialize_tracepoint): Add disconnected-tracing variable.
	* NEWS: Mention disconnected tracing.

2010-01-06  Tristan Gingold  <[email protected]>

	* symtab.c (lookup_global_symbol_from_objfile): Rename objfile
	parameter to main_objfile.  Iterate on all separate debug objfiles.
	* symfile.h (symbol_file_add_separate)
	(find_separate_debug_file_by_debuglink): Remove parameter names.
	* symfile.c (symbol_file_add_separate): Use add_separate_objfile.
	(reread_symbols): Use free_objfile_separate_debug.
	* objfiles.h (struct objfile): Add separate_debug_objfile_link.
	Adjust comment.
	(objfile_separate_debug_iterate, add_separate_debug_objfile)
	(free_objfile_separate_debug): New prototypes.
	* objfiles.c (objfile_separate_debug_iterate): New function.
	(add_separate_debug_objfile, free_objfile_separate_debug): New
	functions.
	(free_objfile): Use free_objfile_separate_debug.  Adjust for
	multiple separate debug objfile.
	(objfile_has_symbols): Adjust comment.  Iterate on all separate
	debug objfiles.
	* minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
	debug objfile.
	(lookup_minimal_symbol_text): Ditto.
	(lookup_minimal_symbol_by_pc_name): Ditto.
	(lookup_minimal_symbol_solib_trampoline): Ditto.
	(lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
	debug objfiles.

2010-01-05  Stan Shebs  <[email protected]>

	Add fast tracepoints.
	* arch-utils.h (default_fast_tracepoint_valid_at): Declare.
	* arch-utils.c (default_fast_tracepoint_valid_at): New function.
	* breakpoint.h (enum bptype): Add bp_fast_tracepoint.
	* breakpoint.c (tracepoint_type): New function.
	(ALL_TRACEPOINTS): Use it.
	(should_be_inserted): Ditto.
	(bpstat_check_location): Ditto.
	(print_one_breakpoint_location): Ditto.
	(user_settable_breakpoint): Ditto.
	(set_breakpoint_location_function): Ditto.
	(disable_breakpoints_in_shlibs): Ditto.
	(delete_trace_command): Ditto.
	(print_it_typical): Add bp_fast_tracepoint case.
	(bpstat_what): Ditto.
	(print_one_breakpoint_location): Ditto.
	(allocate_bp_location): Ditto.
	(mention): Ditto.
	(breakpoint_re_set_one): Ditto.
	(disable_command): Ditto.
	(enable_command): Ditto.
	(check_fast_tracepoint_sals): New function.
	(break_command_really): Call it.
	(ftrace_command): New function.
	(_initialize_breakpoint): Add ftrace command.
	* gdbarch.sh (fast_tracepoint_valid_at): New.
	* gdbarch.h, gdbarch.c: Regenerate.
	* i386-tdep.c (i386_fast_tracepoint_valid_at): New function.
	(i386_gdbarch_init): Use it.
	* remote.c (struct remote_state): New field fast_tracepoints.
	(PACKET_FastTracepoints): New packet config type.
	(remote_fast_tracepoint_feature): New function.
	(remote_protocol_features): Add FastTracepoints.
	(remote_supports_fast_tracepoints): New function.
	(_initialize_remote): Add FastTracepoints.
	* tracepoint.c (download_tracepoint): Add fast tracepoint option.
	* NEWS: Mention fast tracepoints.

2010-01-06  Joel Brobecker  <[email protected]>

	* gdb-gdb.py: New file.

2010-01-05  Michael Snyder  <[email protected]>

	* infrun.c (handle_inferior_event): Fix typo in comment.

2010-01-05  Jan Kratochvil  <[email protected]>

	* symfile.c (syms_from_objfile): Remove the !MAINLINE conditional.

2010-01-04  Ulrich Weigand  <[email protected]>

        * features/Makefile (WHICH): Add s390-linux32, s390-linux64,
	and s390x-linux64.
	(s390-linux32-expedite): Define.
	(s390-linux64-expedite): Define.
	(s390x-linux64-expedite): Define.
	* features/s390-acr.xml: New file.
	* features/s390-fpr.xml: New file.
	* features/s390-core32.xml: New file.
	* features/s390-core64.xml: New file.
	* features/s390x-core64.xml: New file.
	* features/s390-linux32.xml: New file.
	* features/s390-linux64.xml: New file.
	* features/s390x-linux64.xml: New file.
	* features/s390-linux32.c: New generated file.
	* features/s390-linux64.c: New generated file.
	* features/s390x-linux64.c: New generated file.

	* regformats/s390-linux32.dat: New generated file.
	* regformats/s390-linux64.dat: New generated file.
	* regformats/s390x-linux64.dat: New generated file.
	* regformats/reg-s390.dat: Remove.
	* regformats/reg-s390x.dat: Remove.

	* s390-nat.c: Include "auxv.h" and <elf.h>.
	(HWCAP_S390_HIGH_GPRS): Define if undefined.
	(s390_target_wordsize): New function.
	(s390_auxv_parse): Likewise.
	(s390_get_hwcap): Likewise.
	(s390_read_description): Likewise.
	(_initialize_s390_nat): Install s390_auxv_parse and
	s390_read_description.

	* s390-tdep.c: Include "features/s390-linux32.c",
	"features/s390-linux64.c", and "features/s390x-linux64.c".
	(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
	(s390_register_call_saved): New function.
	(s390_register_name): Remove.
	(s390_register_type): Remove.
	(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
	(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
	(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
	(s390_pseudo_register_name): New function.
	(s390_pseudo_register_type): New function.
	(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
	Handle full GPR pesudos and varying pseudo register numbers.
	(s390_pseudo_register_write): Likewise
	(s390x_pseudo_register_read): Remove.
	(s390x_pseudo_register_write): Likewise.
	(s390_register_group): Remove.
	(s390_pseudo_register_group): New function.
	(s390_regmap_gregset): Add GPR upper halves.
	(s390x_regmap_gregset): Likewise.
	(s390_regmap_fpregset): Likewise.
	(s390_regmap_upper): New global variable.
	(s390_upper_regset): New global variable.
	(s390_upper_regset_sections): New global variable.
	(s390_regset_from_core_section): Handle GPR upper halves.
	(s390_core_read_description): New function.
	(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
	register information.  Handle varying pseudo register numbers.
	(s390_backchain_frame_unwind_cache): Likewise.
	(s390_frame_prev_register): Unwind full GPRs to show lower halves.
	(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
	(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
	PC and CC pseudos.  Unwind upper halves and full GPRs as appropriate.
	Handle varying pseudo register numbers.
	(s390_unwind_pc): Handle varying pseudo register numbers.
	(s390_dwarf2_prev_register): New function.
	(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
	register information.  Handle varying pseudo register numbers.
	Install s390_dwarf2_prev_register to unwind full GPRs.
	(s390_gdbarch_init): Handle target descriptions.  Assign varying
	pseudo register numbers.  Install s390_adjust_frame_regnum.
	(_initialize_s390_tdep): Initialize target descriptions.

	* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
	(S390_NUM_REGS): Redefine to include upper half registers.
	(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
	(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
	(tdesc_s390_linux32): Add declaration.
	(tdesc_s390_linux64): Likewise.
	(tdesc_s390x_linux64): Likewise.

2010-01-04  Ulrich Weigand  <[email protected]>

	* regset.h (struct core_regset_section): Add HUMAN_NAME.
	* i386-linux-tdep.c (i386_linux_regset_sections): Fill in HUMAN_NAME.
	* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections): Likewise.
	(ppc_linux_vmx_regset_sections): Likewise.
	(ppc_linux_fp_regset_sections): Likewise.

	* corelow.c (get_core_register_section): Constify arguments.
	(get_core_registers): Use gdbarch_core_regset_sections instead
	of hard-coded platform-specific register section names.

2010-01-04  Ulrich Weigand  <[email protected]>

	* dwarf2loc.c (read_pieced_value): If a piece occupies part of
	a register, assume the least-significant part is used.
	(write_pieced_value): Likewise.

2010-01-04  Ulrich Weigand  <[email protected]>

	* printcmd.c: Include "arch-utils.h".
	(do_one_display): Re-parse expression if current architecture changed.

2010-01-03  Jan Kratochvil  <[email protected]>
	    Joel Brobecker  <[email protected]>

	* gdbtypes.c (check_typedef): New comment on type length.
	* value.c (allocate_value_lazy): Remove the unused atype variable.  New
	comment on type length.
	(value_primitive_field): Keep the original TYPE value, new comment.

2010-01-01  Jan Kratochvil  <[email protected]>

	* cli/cli-script.c (process_next_line): Rename p1 as p_end and p2 as
	p_start.  Change != comparisons to > and < comparisons.

2010-01-01  Jan Kratochvil  <[email protected]>

	* cli/cli-script.c (process_next_line): Check P2 overrun.

2009-01-01  Joel Brobecker  <[email protected]>

	Update the copyright hearder to add year 2010 for most GDB files.

2009-01-01  Joel Brobecker  <[email protected]>

	Fix build failure in inf-ptrace.c.
	* inf-ptrace.c (inf_ptrace_follow_fork): Fix typo.

2010-01-01  Joel Brobecker  <[email protected]>

	* top.c (print_gdb_version): Update copyright year.

2010-01-01  Joel Brobecker  <[email protected]>

	Fix break *FUN'address thread NUM.
	* ada-lex.l (task): Expand rule to also match the thread keyword.

2010-01-01  Joel Brobecker  <[email protected]>

	Fix break *FUN'address task NUM.
	* ada-lex.l (task): New rule.
	* ada-lang.c (valid_task_id): Make sure the Ada task list has
	been built before using it.

For older changes see ChangeLog-2009.
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End: