Update formatting to ISO-C90

[binutils.git] / opcodes / ChangeLog

2006-02-27  Carlos O'Donell  <[email protected]>

	* po/Make-in: Add html target.

2006-02-27  H.J. Lu <[email protected]>

	* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
	Intel Merom New Instructions.
	(THREE_BYTE_0): Likewise.
	(THREE_BYTE_1): Likewise.
	(three_byte_table): Likewise.
	(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
	THREE_BYTE_1 for entry 0x3a.
	(twobyte_has_modrm): Updated.
	(twobyte_uses_SSE_prefix): Likewise.
	(print_insn): Handle 3-byte opcodes used by Intel Merom New
	Instructions.

2006-02-24  David S. Miller  <[email protected]>

	* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
	(v9_hpriv_reg_names): New table.
	(print_insn_sparc): Allow values up to 16 for '?' and '!'.
	New cases '$' and '%' for read/write hyperprivileged register.
	* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
	window handling and rdhpr/wrhpr instructions.
	
2006-02-24  DJ Delorie  <[email protected]>

	* m32c-desc.c: Regenerate with linker relaxation attributes.
	* m32c-desc.h: Likewise.
	* m32c-dis.c: Likewise.
	* m32c-opc.c: Likewise.

2006-02-24  Paul Brook  <[email protected]>

	* arm-dis.c (arm_opcodes): Add V7 instructions.
	(thumb32_opcodes): Ditto.  Handle V7M MSR/MRS variants.
	(print_arm_address): New function.
	(print_insn_arm): Use it.  Add 'P' and 'U' cases.
	(psr_name): New function.
	(print_insn_thumb32): Add 'U', 'C' and 'D' cases.

2006-02-23  H.J. Lu  <[email protected]>

	* ia64-opc-i.c (bXc): New.
	(mXc): Likewise.
	(OpX2TaTbYaXcC): Likewise.
	(TF). Likewise.
	(TFCM). Likewise.
	(ia64_opcodes_i): Add instructions for tf.

	* ia64-opc.h (IMMU5b): New.

	* ia64-asmtab.c: Regenerated.

2006-02-23  H.J. Lu  <[email protected]>

	* ia64-gen.c: Update copyright years.
	* ia64-opc-b.c: Likewise.

2006-02-22  H.J. Lu  <[email protected]>

	* ia64-gen.c (lookup_regindex): Handle ".vm".
	(print_dependency_table): Handle '\"'.

	* ia64-ic.tbl: Updated from SDM 2.2.
	* ia64-raw.tbl: Likewise.
	* ia64-waw.tbl: Likewise.
	* ia64-asmtab.c: Regenerated.

	* ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1.

2006-02-17  Shrirang Khisti  <[email protected]>
            Anil Paranjape   <[email protected]>
            Shilin Shakti    <[email protected]>

	* xc16x-desc.h: New file
	* xc16x-desc.c: New file
	* xc16x-opc.h: New file	
	* xc16x-opc.c: New file
	* xc16x-ibld.c: New file
	* xc16x-asm.c: New file
	* xc16x-dis.c: New file
	* Makefile.am: Entries for xc16x 
	* Makefile.in: Regenerate 
	* cofigure.in: Add xc16x target information.
	* configure: Regenerate.
	* disassemble.c: Add xc16x target information.

2006-02-11  H.J. Lu  <[email protected]>

	* i386-dis.c (dis386_twobyte): Use "movZ" for debug register
	moves.

2006-02-11  H.J. Lu  <[email protected]>

	* i386-dis.c ('Z'): Add a new macro.
	(dis386_twobyte): Use "movZ" for control register moves.

2006-02-10  Nick Clifton  <[email protected]>

	* iq2000-asm.c: Regenerate.

2006-02-07  Nathan Sidwell  <[email protected]>

	* m68k-dis.c (print_insn_m68k): Use bfd_m68k_mach_to_features.

2006-01-26  David Ung  <[email protected]>

	* mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,
	ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d,
	floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d,
	nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d,
	rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.

2006-01-18  Arnold Metselaar  <[email protected]>

	* z80-dis.c (struct buffer, prt_d, prt_d_n, arit_d, ld_r_d,
	ld_d_r, pref_xd_cb): Use signed char to hold data to be
	disassembled.	
	* z80-dis.c (TXTSIZ): Increase buffer size to 24, this fixes
	buffer overflows when disassembling instructions like
	ld (ix+123),0x23
	* z80-dis.c (opc_ind, pref_xd_cb): Suppress '+' in an indexed
	operand, if the offset is negative.

2006-01-17  Arnold Metselaar  <[email protected]>

	* z80-dis.c (struct buffer, prt_d, prt_d_n, pref_xd_cb): Use
	unsigned char to hold data to be disassembled.

2006-01-17  Andreas Schwab  <[email protected]>

	PR binutils/1486
	* disassemble.c (disassemble_init_for_target): Set
	disassembler_needs_relocs for bfd_arch_arm.

2006-01-16  Paul Brook  <[email protected]>

	* m68k-opc.c (m68k_opcodes): Fix opcodes for ColdFire f?abss,
	f?add?, and f?sub? instructions.

2006-01-16  Nick Clifton  <[email protected]>

	* po/zh_CN.po: New Chinese (simplified) translation.
	* configure.in (ALL_LINGUAS): Add "zh_CH".
	* configure: Regenerate.

2006-01-05  Paul Brook  <[email protected]>

	* m68k-opc.c (m68k_opcodes): Add missing ColdFire fdsqrtd entry.

2006-01-06  DJ Delorie  <[email protected]>

	* m32c-desc.c: Regenerate.
	* m32c-opc.c: Regenerate.
	* m32c-opc.h: Regenerate.

2006-01-03  DJ Delorie  <[email protected]>

	* cgen-ibld.in (extract_normal): Avoid memory range errors.
	* m32c-ibld.c: Regenerated.

For older changes see ChangeLog-2005
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: