Handle case of 32 ABI saving 32 bit registers on stack when target

[binutils.git] / gdb / ChangeLog

Fri May 12 19:13:15 2000  Andrew Cagney  <[email protected]>

	* mips-tdep.c (mips_get_saved_register): New function.  Handle
 	case of 32 ABI saving 32 bit registers on stack when target has 64
 	bit ISA.
	(mips_gdbarch_init): Update.

Fri May 12 14:46:52 2000  Andrew Cagney  <[email protected]>

	* mips-tdep.c (MIPS_EABI): Fix typo.  Test for MIPS_ABI_EABI64.

Thu May 11 21:52:55 2000  Andrew Cagney  <[email protected]>

	* configure.in (WERROR_CFLAGS): Check that GCC accepts a -W
 	options before using them. Report result.
	* configure: Regenerate.
	
2000-05-11  Elena Zannoni  <[email protected]>

	* coffread.c (coff_symtab_read): In the case of C_THUMBEXT |
 	C_THUMBEXTFUNC | C_EXT, sec will never ever be the index for
 	.rodata, because cs_to_section doesn't deal with .rodata. Fix test
 	accordingly.

Thu May 11 21:33:59 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh (gdbarch_dump): Print the value of GDB_MULTI_ARCH.
  	Always check that a macro is defined before printing it.
	* gdbarch.c: Re-generate.

Thu May 11 17:22:36 2000  Andrew Cagney  <[email protected]>

	* README: Update for GDB 5.0.

Thu May 11 13:24:52 2000  Andrew Cagney  <[email protected]>

	* mips-tdep.c (MIPS_DEFAULT_STACK_ARGSIZE): Fix typo.

	* config/mips/tm-irix5.h (GDB_MULTI_ARCH): Add
 	definition. Disable.  Document known problems.
	(MIPS_DEFAULT_ABI): Define.

	* mips-tdep.c (enum mips_abi): Define.
	(struct gdbarch_tdep): Replace mips_eabi with mips_abi.
	(MIPS_EABI): Update.
	(mips_gdbarch_init): Add preliminary support for IRIX N32 ABI.
  	Determine ABI from either ELF_FLAGS or MIPS_DEFAULT_ABI. When
 	looking for a matching architecture require a matching MIPS_ABI.
	(mips_gdbarch_init): Cleanup arch_debug information.

2000-05-10  Elena Zannoni  <[email protected]>

        * solib.c (symbol_add_stub): Remember the index and the name of
        the section with the lowest address. Use this data (instead of
        data from .text) to pass info into symbol_file_add.

        * elfread.c (record_minimal_symbol_and_info): Use the section 
	where the symbol lives to get the index, instead of guessing.

2000-05-10  Michael Snyder  <[email protected]>

	Make Sparc a Multi-Arch target.  Discard PARAMS macro (require ANSI).
	* sparc-tdep.c: include arch-utils.h.
	(SPARC_HAS_FPU, FP_REGISTER_BYTES, FP_MAX_REG NUM, SPARC_INTREG_SIZE,
	DUMMY_REG_SAVE_OFFSET): provide multi-arch-compatible definitions.
	(GDB_TARGET_IS_SPARC64): make into a runtime test.
	(struct frame_extra_info): Define, use instead of the macro.
	(Many places): Use alloca instead of statically allocated buffers
	that depend on a multi-arch variable such as MAX_REGISTER_RAW_SIZE.
	(sparc_extract_struct_value_address): Accept a pointer arg instead
	of an array sized by REGISTER_BYTES.
	(examine_prologue): Accept a pointer to an array of CORE_ADDR, 
	instead of the defunct struct frame_saved_regs.  Recognize new
	Sparc64 store instructions as part of the prologue.  Ignore the
	destination of a frame store when parsing the prologue (so long
	as it's on the stack).
	(sparc_push_dummy_frame): Fix incorrect buffer offset for PSTATE.
	(sparc_frame_find_saved_regs): Accept a ptr to an array of CORE_ADDR
	instead of the defunct struct frame_saved_regs.
	(supply_gregset): Discard unnecessary 'zerobuf': just send NULL to
	supply_register.  Provide 4-byte offset to compensate for diff
	between size of the prgreg_t elements on a 64-bit host and size
	of the registers for a 32-bit target.  Fill all inaccessible regs
	with zero so they won't keep being requested again and again.
	(fill_gregset): Handle 32/64 size difference between registers
	and prgreg_t.  Handle as many new 64-bit regs as possible.
	(supply_fpregset, fill_fpregset): Attempt to handle 64-bit world.
	(sparc_push_arguments): Rename to sparc32_push_arguments.
	Copy arguments into registers as well as onto stack, so that the
	CALL_DUMMY (code pushed onto the target stack) is not required.
	(sparc_extract_return_value): Rename to sparc32_extract_return_value.
	(sparc_store_return_value): Use memset instead of bzero.
	Use write_register_gen instead of write_register_bytes.
	(sparclet_store_return_value): New function.
	(_initialize_sparc_tdep): Call register_gdbarch_init to activate
	the gdbarch multi-architecture system.
	(sp64_push_arguments): Rename to sparc64_push_arguments.
	Extend to store arguments in general registers as well as on stack.
	(sparc64_extract_return_value): Rename to sp64_extract_return_value.
	Use as a private function, to be called by the new external function
	sparc64_extract_return_value.
	(sparclet_extract_return_value): New function.
	(sparc32_stack_align, sparc64_stack_align, sparc32_register_name,
	sparc64_register_name, sparc_print_extra_frame_info,
	sparclite_register_name, sparclet_register_name, 
	sparc_push_return_address, sparc64_use_struct_convention, 
	sparc32_store_struct_return, sparc64_store_struct_return, 
	sparc32_register_virtual_type, sparc64_register_virtual_type, 
	sparc32_register_size, sparc64_register_size, 
	sparc32_register_byte, sparc64_register_byte, 
	sparc_gdbarch_skip_prologue, sparc_convert_to_virtual, 
	sparc_convert_to_raw, sparc_frame_init_saved_regs, 
	sparc_frame_address, sparc_gdbarch_fix_call_dummy, 
	sparc_coerce_float_to_double, sparc_call_dummy_address, 
	sparc_y_regnum, sparc_reg_struct_has_addr, sparc_intreg_size,
	sparc_return_value_on_stack): New functions supporting multi-arch.
	(sparc_gdbarch_init): New function; initialize multi-arch.
	(struct gdbarch_tdep): Define, use for private multi-arch data.
	* config/sparc/tm-sparc.h: Move definitions around, enclose with
	#ifdef GDB_MULTI_ARCH tests, provide some multi-arch alternate
	definitions.  Add enums for register names, to help debugging gdb.
	This header file must work for non-multi-arch and for multi-arch.
	* config/sparc/tm-sp64.h: Add GDB_MULTI_ARCH configuration.  Also add
	AT_ENTRY_POINT definitions for CALL_DUMMY, for non-multi-arch case.
	Define GDB_MULTI_ARCH.
	* config/sparc/tm-sparclet.h: Add GDB_MULTI_ARCH configuration.
	Do not define GDB_MULTI_ARCH (bfd does not correctly identify target).
	* config/sparc/tm-sparclite.h: Ditto.
	* config/sparc/tm-sun4sol2.h: Define GDB_MULTI_ARCH.
	* sparclet-rom.c (sparclet_regnames): Initialize explicitly, to
	avoid using deprecated REGISTER_NAMES macro.
	* Makefile.in: Let sparc-tdep.c depend on arch-utils.h.

2000-05-08  Michael Snyder  <[email protected]>

	* gdbarch.sh: Add FP0_REGNUM to list of multi-arched register numbers.
	* gdbarch.c, gdbarch.h: Regenerate.
	* core-regset.c: Change FP0_REGNUM to a runtime test.
	* procfs.c: Ditto.
	* sun3-nat.c: Ditto.
	* sparc-tdep.c: Ditto.
	
	* i386mach-nat.c: Remove unnecessary ifdef for FP0_REGNUM.
	* ptx4-nat.c: Ditto.

	* sol-thread.c (sol_thread_create_inferior): only add the thread
	to the thread list if it is not already in there.
	(prototypes for thread_db func ptrs): pretty up formatting.

2000-05-08  Eli Zaretskii  <[email protected]>

	* config/djgpp/djconfig.sh: Use more warning switches.

	* config/djgpp/fnchange.lst: Replace the leading gdb-0222 with the
        @V@ placebo.  djunpack.bat changed accordingly.

Mon May  8 11:19:47 2000  Andrew Cagney  <[email protected]>

	* mips-tdep.c (size_auto, size_32, size_64, size_enums): Rename
 	saved_gpreg_size_auto, saved_gpreg_size_32, saved_gpreg_size_64
 	and saved_gpreg_size_enums.
	(mips_stack_argsize): Update. Cleanup.

	* mips-tdep.c (STACK_ARGSIZE): Delete macro.  Replaced by
 	MIPS_STACK_ARGSIZE.
	(MIPS_NABI32): Delete macro. Replaced by
 	MIPS_REGS_HAVE_STACK_HOME_P.
	(mips_push_arguments): Update.
	(mips_push_arguments): Replace check for MIPS_EABI or MIPS_NABI32
 	with test for MIPS_REGS_HAVE_STACK_HOME_P.
	(MIPS_REGS_HAVE_STACK_HOME_P): Define.  Provide non- multi-arch
 	default.
	(struct gdbarch_tdep): Add mips_regs_have_stack_home_p and
 	mips_default_stack_argsize.
	(MIPS_STACK_ARGSIZE): Define as mips_stack_argsize.
	(mips_stack_argsize_string): New static variable.
	(mips_stack_argsize): New function, handle default case.
	(__initialize_mips_tdep): Add command ``set mips stack-arg-size''
 	implemented as an enum using size_auto et.al.
	(mips_gdbarch_init): Initialize mips_default_stack_argsize and
 	mips_regs_have_stack_home_p.

	* config/mips/tm-irix5.h (MIPS_DEFAULT_SAVED_REGSIZE): Define as 8
 	for n32.
	(MIPS_REGS_HAVE_STACK_HOME_P): Define as 0 for n32.

Mon May  8 00:49:32 2000  Andrew Cagney  <[email protected]>

	* procfs.c (PROCFS_TRACE): Delete definition.
	* proc-utils.h (PROCFS_NOTE, PROC_PRETTYFPRINT_STATUS): Always
 	define.

2000-05-05  Michael Snyder  <[email protected]>

	* procfs.c: Cleanup of procfs tracing.  Move defines and 
	prototypes to proc-utils.h
	* proc-utils.h: Define tracing macros.  Declare trace functions.
	* proc-api.c: Make procfs tracing a runtime option.
	(prepare_to_trace): New function, abstracted out of several
	places.  Open a trace file if one is required.
	(ioctl_with_trace, write_with_trace, open_with_trace, 
	close_with_trace, wait_with_trace, lseek_with_trace):
	Report errno if an error occurs in a system call.
	(write_with_trace): Make 2nd arg void *, to agree with write.

2000-05-05  Elena Zannoni  <[email protected]>

        * elfread.c (elf_symtab_read): The calculation of 'offset' 
        must be done for each symbol, not just once. The index 
        used must be the index of the section where 'sym' resides,
        not .text.

2000-05-05  Michael Snyder  <[email protected]>

	* procfs.c (many functions): change int cmd; to long cmd;
	Solaris /proc API calls this parameter a long, and requires it
	for 64-bit hosts (where sizeof(long) != sizeof(int)).  UnixWare
	calls it an int, but on existing UnixWare hosts, int and long
	are the same size.  So long it must be.  If a future UnixWare
	version has problems with this, we'll have to use autoconf.
	* proc-api.c (write_with_trace): use long instead of int.

2000-05-04  Mark Kettenis  <[email protected]>

	* i386-linux-nat.c: Define PT_READ_U and PT_WRITE_U if they're not
	already defined.

2000-05-01  Mark Kettenis  <[email protected]>

	* infrun.c (handle_inferior_event): Add missing call to keep_going
	and missing return when handling an ordinary signal from the
	inferior.

2000-05-04  Elena Zannoni  <[email protected]>

        * objfiles.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
        SECT_OFF_RODATA): Define as functions of OBJFILE.  Add
        sect_index_text, sect_index_data, sect_index_rodata,
        sect_index_bss to objfile structure.
        * gdb-stabs.h (SECT_OFF_DATA, SECT_OFF_TEXT, SECT_OFF_BSS,
        SECT_OFF_RODATA): Remove.
        * objfiles.c (allocate_objfile): Initialize
        sect_index_{text,data,bss,rodata} to -1, for error detection.

        * symfile.c (default_symfile_offsets): Initialize
        sect_index_{text,data,bss,rodata} from bfd information.
        * xcoffread.c (xcoff_symfile_offsets): Ditto.
        * somread.c (som_symfile_offsets): Initialize
        sect_index_{text,data,bss,rodata}.

        * coffread.c, dbxread.c, elfread.c, hp-psymtab-read.c,
        hp-symtab-read.c, hpread.c, mdebugread.c, minsyms.c,
        mipsread.c, objfiles.c, os9kread.c, pa64solib.c, partial-stab.h,
        remote-os9k.c, remote-vx.c, remote.c, rs6000-nat.c, somsolib.c,
        stabsread.c, symfile.c, xcoffread.c:
        Update use of SECT_OFF_{TEXT,DATA,BSS,RODATA} to depend on the
        current objfile.

        * xcoffread.c: Add new field objfile to find_targ_sec_arg.

Thu May  4 20:54:00 2000  Andrew Cagney  <[email protected]>

	* config/mips/tm-mipsv4.h (Dest_Reg), config/mips/tm-irix5.h
 	(MIPS_NUM_ARG_REGS, Dest_Reg), config/mips/tm-mips.h
 	(MIPS_NUM_ARG_REGS), config/mips/tm-mips.h (MIPS_NUM_FP_ARG_REGS):
 	Delete unused macros.

2000-05-03  Michael Snyder  <[email protected]>

	* solib.c (elf_locate_base, info_sharedlibrary_command):
	Look at the bfd to determine if it is elf32 or elf64, rather
	than using an ifdef.  This makes it runtime teststable and
	multi-arch.

2000-05-01  Mark Kettenis  <[email protected]>

	* infrun.c (handle_inferior_event): When doing a "next", and
	stepping out of a signal handler into its calling trampoline
	ignore the value of step_frame_address.
	(step_over_function): Only modify step_resume_breakpoint->frame if
	the value of step_frame_address is non-zero.

2000-05-03  Michael Snyder  <[email protected]>

	* monitor.c (monitor_fetch_register): MAX_REGISTER_RAW_SIZE
	is not static in the MULTI_ARCH world, so don't use it in a
	static array declaration.

2000-05-03  Elena Zannoni  <[email protected]>

	* symtab.c (in_prologue): From Jim Blandy. Rewrite, more
	intelligently, making sure we use the information from the 
        symbol tables fully.

2000-05-02  H.J. Lu  <[email protected]>

	* ia64-tdep.c (ia64_gdbarch_init): Reference to ELFOSABI_NONE
	instead of ELFOSABI_SYSV.

Tue May  2 19:07:20 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh (NPC_REGNUM, NNPC_REGNUM): Add.
	* gdbarch.h, gdbarch.c: Re-generate.

	* gdbserver/remote-utils.c (prepare_resume_reply): Change #ifdef
 	NPC_REGNUM to run-time test.
	* findvar.c (generic_target_write_pc): Change #ifdef NPC_REGNUM
 	and NNPC_REGNUM to run-time test.
	* procfs.c (procfs_fetch_registers): Change #ifdef NPC_REGNUM to
 	run-time test.
	(procfs_store_registers): Ditto.

Tue May  2 18:48:57 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh: Provide non- multi-arch defaults by direct
 	definition in "gdbarch.h" instead of going through "gdbarch.c".
	* gdbarch.h, gdbarch.c: Re-generate.
	* defs.h: When non- multi-arch, include "arch-utils.h" so that
 	legacy definitions are globally visible.
	
Tue May  2 16:32:06 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Syd Polk to gdbtk maintainers.
	(symtabs): Add Elena to symtabs maintainers list.
	(Blanket Write Privs): Add Jim Blandy.

2000-05-01  Stan Shebs  <[email protected]>

	Remove obsolete Gould configuration:
	* configure.host, configure.tgt: Remove Gould configs.
	* Makefile.in: Remove Gould-related actions.
	* gould-xdep.c, gould-tdep.c, config/gould/*: Remove files.
	* NEWS: Mention removal.
	
Mon May  1 15:37:58 2000  Andrew Cagney  <[email protected]>

	From 2000-04-28 Andreas Jaeger <[email protected]>:
	* defs.h: Properly check for GCC version number.

2000-04-30  Mark Kettenis  <[email protected]>

	Fix single-stepping out of signal trampolines.
	* config/i386/nm-linux.h (CHILD_RESUME): Define.
	* i386-linux-nat.c (child_resume): New function.

Fri Apr 28 16:22:34 2000  Andrew Cagney  <[email protected]>

	* blockframe.c (frameless_look_for_prologue): Use
 	PROLOG_FRAMELESS_P instead of SKIP_PROLOGUE_FRAMELESS_P.
	* gdbarch.sh (PROLOG_FRAMELESS_P): Define.
	* gdbarch.h, gdbarch.c: Re-generate.
	* arch-utils.h, arch-utils.c (generic_prologue_frameless_p): New
 	function.
	
Fri Apr 28 15:31:10 2000  Andrew Cagney  <[email protected]>

	From "Serge Nikulin" <[email protected]>:
	* m68k-tdep.c (delta68_in_sigtramp): Return 0 when the function
 	name is unknow.

2000-04-27  Michael Snyder  <[email protected]>

	* gdbarch.sh (d10v_daddr_p, d10v_iaddr_p, d10v_convert_daddr_to_raw,
	d10v_convert_iaddr_to_raw): make these multi-arch functions optional.
	* gdbarch.c, gdbarch.h: regenerate
	
Fri Apr 28 12:21:28 2000  Andrew Cagney  <[email protected]>

	From Tim Mooney <[email protected]>:
	* target.c (do_monitor_command): Cast tcomplain to correct
 	function type in comparison.

Fri Apr 28 11:43:05 2000  Andrew Cagney  <[email protected]>

	From 2000-04-25 Guy Harris <[email protected]>:
	* config/alpha/alpha-osf3.mh (XDEPFILES): Add ser-tcp.o and
 	ser-pipe.o

2000-04-27  Michael Snyder  <[email protected]>

	* jv-valprint.c (java_val_print): Add arg declaration, 
	fix compiler warning.
	* corelow.c (core_open): Call set_gdbarch_from_file so that 
	gdbarch becomes aware of the architecture encoded in the 
	corefile.
	* findvar.c (write_register_gen): Export this useful interface.
	* value.h (write_register_gen): Declare.

2000-04-27  Elena Zannoni  <[email protected]>

	* cxux-nat.c (add_shared_symbol_files): Don't treat .text section
 	as special in the section_addr_info structure.
	* pa64solib.c (pa64_solib_add_solib_objfile): Ditto.
	* osfsolib.c (symbol_add_stub): Ditto.
	* irix5-nat.c (symbol_add_stub): Ditto.

Thu Apr 27 14:07:16 2000  Andrew Cagney  <[email protected]>

	* mips-tdep.c, d10v-tdep.c: Include "arch-utils.h".

Thu Apr 27 10:06:42 2000  Andrew Cagney  <[email protected]>

	* TODO: Document IRIX X ARM cross compile problems.

2000-04-26  Michael Snyder  <[email protected]>

	* utils.c (internal_verror): Call target_terminal_ours.
	* wrapper.h: Fix minor comment typo.
	* proc-api.c (write_with_trace): Change 'arg' from long to int.
	Treat 'off_t' and 'size_t' as unsigned long in printfs.
	(lseek_with_trace): Treat 'off_t' as unsigned long in printf.
	* procfs.c (comments): Eliminate "???" in comments, which GCC
	wants to interpret as a trigraph.  (fill_gregset, supply_gregset,
	fill_fpregset, supply_fpregset): Declare.
	(procfs_wait): Sysargs is a long, change printf format to match.
	(test-mapping, mapping_test, test_mapping_cmd) Remove (test only).

2000-04-26  Kevin Buettner  <[email protected]>

	* config/djgpp/fnchange.lst (ia64-linux-nat.c): Map to
	ia64linux-nat.c.

Wed Apr 26 13:50:35 2000  Philippe De Muyter  <[email protected]>

	* ax-gdb.c (agent_command): Remove now useless cast of
	`free_current_contents' when passed to `make_cleanup'.
	* coffread.c (coff_symfile_read): Ditto.
	* dwarf2read.c (dwarf2_add_member_fn, read_array_type): Ditto.
	(dwarf_decode_lines): Ditto.
	* eval.c (parse_and_eval_address, parse_and_eval_address_1): Ditto.
	(parse_and_eval, parse_to_comma_and_eval): Ditto.
	* parse.c (parse_exp_1): Ditto.
	* printcmd.c (print_command_1, output_command, set_command): Ditto.
	(x_command, print_frame_args, printf_command): Ditto.
	* top.c (execute_control_command): Ditto.
	* tracepoint.c (validate_actionline): Ditto.
	* typeprint.c (whatis_exp, ptype_command): Ditto.
	(maintenance_print_type): Ditto.

2000-04-26  Kevin Buettner  <[email protected]>

	* Makefile.in (ALLDEPFILES): Add ia64-linux-tdep.c.
	(ia64-linux-tdep.o): Add dependencies.
	(ia64-tdep.o): Add dependency for arch-utils.h.
	* ia64-linux-tdep.c, ia64-tdep.c (arch-utils.h): Include.

2000-04-25  Michael Snyder  <[email protected]>

	* blockframe.c: Fix a minor typo in a comment.

2000-04-25  Kevin Buettner  <[email protected]>

	* ia64-tdep.c (examine_prologue): Recognize store instructions;
	those whose source operands are input registers which haven't
	been seen before are considered to be part of the prologue.

Tue Apr 25 13:51:58 2000  glen mccready  <[email protected]>

	* rs6000-nat.c (xcoff_relocate_symtam): Recover from the wrong
	patch being applied `Fri Apr  7 13:44:38 2000'.

2000-04-24  Kevin Buettner  <[email protected]>

	* ia64-linux-tdep.c: New file.
	* ia64-tdep.c (elf-bfd.h): Include.
	(ia64_linux_sigcontext_register_address): New extern declaration.
	(struct gdbarch_tdep): New struct.
	(SIGCONTEXT_REGISTER_ADDRESS): New define.
	(read_sigcontext_register): New static function.
	(extract_bit_field, replace_bit_field, slotN_contents,
	replace_slotN_contents): Made static.
	(ia64_frame_chain, ia64_frame_saved_pc, ia64_init_extra_frame_info):
	Added new code for signal handler frames and call dummy frames.
	(ia64_frame_init_saved_regs): Handle signal handler frames.
	(ia64_find_saved_register): Removed.
	(ia64_get_saved_register): Handle call dummy frames; reorganized
	to call generic_get_saved_register() to find registers saved
	in previous frames.
	(process_note_abi_tag_sections): New static function.
	(ia64_gdbarch_init): Attempt to determine the ABI/OS of the
	executable.  Based upon this information, set target dependent
	field sigcontext_register_address appropriately.  Also set
	FRAME_CHAIN_VALID to be generic_func_frame_chain_valid.
	* config/ia64/linux.mt (TDEPFILES): Add ia64-linux-tdep.o.
	* config/ia64/tm-linux.h (IN_SIGTRAMP): Define.
	(ia64_linux_in_sigtramp): New declaration.

2000-04-23  Eli Zaretskii  <[email protected]>

	* TODO, NEWS: Update due to inclusion of gdbmi.texinfo in the GDB
	manual.

2000-04-23  Eli Zaretskii  <[email protected]>

	* config/djgpp/README: Explain how to unpack using djunpack.bat.

Fri Apr 21 15:23:13 2000  Andrew Cagney  <[email protected]>

	* stabsread.c (REG_STRUCT_HAS_ADDR): Delete default.
	(define_symbol): Check REG_STRUCT_HAS_ADDR_P before using
 	REG_STRUCT_HAS_ADDR.
	(define_symbol): Ditto.

	* valops.c (hand_function_call): Replace #ifdef
 	REG_STRUCT_HAS_ADDR with if REG_STRUCT_HAS_ADDR_P.  Re-indent
 	affected code.

	* gdbarch.sh (REG_STRUCT_HAS_ADDR): Add along with the predicate
 	function REG_STRUCT_HAS_ADDR_P.
	* gdbarch.h, gdbarch.c: Re-generate.
	
2000-04-21  Elena Zannoni  <[email protected]>

	* gdb-stabs.h (SECT_OFF_MAX): Increase to 40.

2000-04-21  Elena Zannoni  <[email protected]>

	* win32-nat.c  (handle_load_dll): Don't treat .text as a special
 	section anymore.
	* somread.c (som_symfile_offsets): Ditto.
	* somsolib.c (som_solib_add_solib_objfile): Ditto.

Fri Apr 21 16:14:38 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Make Jimmy Guo TUI maintainer.

Fri Apr 21 14:37:40 2000  Andrew Cagney  <[email protected]>

	* command.h (help_all): Delete declaration.
	* command.c (help_all): Add declaration.  Convert function
 	argument list to ISO-C.

Thu Apr 20 18:15:08 2000  Andrew Cagney  <[email protected]>

	* d10v-tdep.c (d10v_gdbarch_init): Initialize stack_align.
	(d10v_stack_align): Make static.
	* config/d10v/tm-d10v.h (STACK_ALIGN): Delete.

Thu Apr 20 14:35:46 2000  Andrew Cagney  <[email protected]>

	* valops.c (hand_function_call): Replace #ifdef STACK_ALIGN with
 	run-time test for STACK_ALIGN_P.
	* gdbarch.sh: Add support for function and variable predicates.
	(STACK_ALIGN): Add.  Implement with predicate - STACK_ALIGN_P.
	* gdbarch.h, gdbarch.c: Re-generate.

Thu Apr 20 17:39:11 2000  Andrew Cagney  <[email protected]>

	* defs.h, utils.c (free_current_contents): Change parameter to
 	void*.

	From Philippe De Muyter  <[email protected]>:
	* printcmd.c (print_address_symbolic): Call `make_cleanup' with
	`(free_current_contents, &x)', not `(free, x)'.
	* utils.c (free_current_contents): Do not `free (NULL)'.

	* printcmd.c (print_address_symbolic): Cleanup after a failed
	call to build_address_symbolic.

2000-04-20  Christopher Faylor  <[email protected]>

	* wince-stub.c (FREE): New macro.
	(mempool): Just free any buffer prior to reuse.  Don't bother with
	realloc.
	(flag_single_step): New function.
	(skip_message): Detect "helpful" Windows CE messages and skip sending
	them to the host.
	(wait_for_debug_event): Use skip_message to avoid sending debug
	messages to the host.
	(dispatch): Prelimary implementation of single step detection.
	* wince.c: Rework SH single stepping code to be more consistent with
	other wince targets.
	(handle_output_debug_string): Allow first chance exceptions to come
	through since they seem to be all that we get on some versions of
	Windows CE.
	(check_for_step): New function, conditionally compiled based on target.
	(regptr): Delete obsolete function.
	(handle_exception): Detect illegal instructions.
	(get_child_debug_event): Return success only if event code matches
	target.
	(child_create_inferior): Reflect change to get_child_debug_event
	arguments.

2000-04-20  Christopher Faylor  <[email protected]>

	* win32-nat.c (thread_rec): Be more defensive about suspending already
	suspended threads.
	(safe_symbol_file_add_stub): New function.
	(safe_symbole_file_add_cleanup): New function.
	(safe_symbol_file_add): New function.
	(handle_load_dll): Use wrapper to add DLL symbol information to avoid
	bogus errors from non-stabs DLLs.
	(handle_exception): Add work around for detection of first exception
	breakpoint which does not seem to occur on W2K.  Detect more "signals"
	that can be effectively passed to the debuggee.  Reorganize to eliminate
	continue_status global.
	(child_continue): Reorganize to eliminate continue_status global.
	(child_wait): Ditto.
	(child_resume): Ditto.
	(get_child_debug_event): Ditto.  Recognize when an a breakpoint
	exception should be ignored.  Change method for signalling when an
	important event has occured to the caller.
	(child_create_inferior): Use new method for noticing when
	get_child_debug_event has found something interesting.

Fri Apr  7 13:44:38 2000  glen mccready  <[email protected]>

        * rs6000-nat.c (xcoff_relocate_symtab): Grow buffer if ptrace()
          fails due to lack of space.

Fri Mar 24 12:10:38 2000  glen mccready  <[email protected]>

        * command.c, command.h (help_all): Add functionality to display
        a complete listing of available commands.

2000-04-20  Scott Bambrough <[email protected]>

	* arm-linux-nat.c (PIDGET, TIDGET): New.
	(get_thread_id, GET_THREAD_ID): New.
	(fetch_nwfpe_register, store_nwfpe_register): New.
	(fetch_register, store_register): New.
	(fetch_fpregister, store_fpregister): New.
	(fill_gregset, supply_gregset): New.
	(fill_fpregset, supply_fpregset): New.
	(fetch_fpregs): Modified to use thread id's.
	(store_fpregs): Modified to use thread id's and
	fetch_nwfpe_register.
	(fetch_regs): Modified to use thread id's.
	(store_regs): Modified to use thread id's.
	(fetch_inferior_registers): Modified to handle single register
	fetches.
	(store_inferior_registers): Modified to handle single register
	stores.
	(arm_linux_register_u_addr): Removed.

	* configure.tgt: Added gdbserver to configdirs for arm*-*-linux*.

	* config/arm/linux.mh
	(NATDEPFILES): Removed core-aout.o.  Added core-regset.o.
	(LOADLIBES): Define.

	* config/arm/nm-linux.h: Include config/nm-linux.h.
	(ATTACH_DETACH): Removed.  Defined in config/nm-linux.h.
	(REGISTER_U_ADDR): Removed.
	(SVR4_SHARED_LIBS): Removed.  Defined in config/nm-linux.h.
	(#include "solib.h"): Removed.  Included via config/nm-linux.h.

Thu Apr 20 18:54:15 2000  Andrew Cagney  <[email protected]>

	From Daniel Berlin <[email protected]> and Tim Mooney
 	<[email protected]>:
	* infrun.c (follow_fork_mode_kind_names): NULL terminate
 	array. Re-indent.
	(scheduler_enums): Ditto.

Mon Apr 17 13:37:10 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh: Make multi-arch variable defaults, defaults for non-
 	multi-arch targets.
	(TARGET_BFD_VMA_BIT, IEEE_FLOAT, CALL_DUMMY_WORDS,
 	SIZEOF_CALL_DUMMY_WORDS): Update.

	* inferior.h (CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS): Default
 	provided by gdbarch.
	(CALL_DUMMY_P): Add FIXME. gdbarch should provide default.

	* valprint.c (IEEE_FLOAT): Default provided by gdbarch.

2000-04-19  Jim Blandy  <[email protected]>

	Bring RETURN_VALUE_ON_STACK under gdbarch's control.
	* gdbarch.sh (RETURN_VALUE_ON_STACK): New entry.
	* gdbarch.c, gdbarch.h: Regenerated.
	* arch-utils.c (default_return_value_on_stack): New function.
	* arch-utils.h (default_return_value_on_stack): New declaration.
	* values.c (RETURN_VALUE_ON_STACK): Delete default definition.

	* i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
	two-dimensional array, instead of faking it with explicit index
	arithmetic.

	* minsyms.c (prim_record_minimal_symbol_and_info): Doc fix.
	(Thanks to Guy Harris.)

2000-04-19  Elena Zannoni  <[email protected]>

        * xcoffsolib.c (solib_add): Fix call to vmap_symtab().

2000-04-19  Peter Schauer  <[email protected]>

	* TODO:  Update.

Wed Apr 19 19:10:07 2000  Andrew Cagney  <[email protected]>

	* TODO: Document -Wreturn-type problem.

2000-03-27  Peter Schauer  <[email protected]>
 
         * maint.c (_initialize_maint_cmds):  Add `mt i' alias for `mt info'.
 
2000-03-27  Peter Schauer  <[email protected]>

        * infcmd.c (_initialize_infcmd):  Add `info r' alias for
        `info registers'.

Wed Apr 19 17:03:07 2000  Andrew Cagney  <[email protected]>

	From Philippe De Muyter <[email protected]>:
	* bcache.c (free_bcache): Do not free NULL.

Wed Apr 19 16:37:47 2000  Andrew Cagney  <[email protected]>

	* TODO: Cleanup.
	* NEWS: Update GDB version.  Duplicate paragraph explaining
 	obsolete.

Wed Apr 19 13:06:55 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (distclean): Delete tui/Makefile.
	* TODO: Add deletion of tui/Makefile.in to list.
	
2000-04-17  Elena Zannoni  <[email protected]>

	* symfile.h (struct section_addr_info ): Remove fields for special
 	treatment of .text, .data and .bss sections.

	* solib.c (symbol_add_stub): The special field text_addr is not
 	available anymore. Search for the .text field the hard way.

	* symfile.c (build_section_addr_info_from_section_table): Don't
 	fill in {text, data, bss}_addr any more.
	(default_symfile_offsets): Don't use {text, data, bss}_addr fields
 	to fill in section_offsets for objfile.
	(syms_from_objfile): Don't deal with {text, data, bss}_addr as a
 	special case anymore.
        (add_symbol_file_command): Ditto.

2000-04-17  Elena Zannoni  <[email protected]>

	symfile.c: (symbol_file_command): Remove support for rombug, to
 	simplify code.

2000-04-17  Elena Zannoni  <[email protected]>

	* symfile.c (add_symbol_file_command): Rewrite the arguments
 	processing part. Simplify syntax of command. Remove support for
 	rombug.
	(_initialize_symfile): Update help message for add-symbol-file
 	command.

Mon Apr 17 15:53:38 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh (IEEE_FLOAT): Only dump when defined.
	* gdbarch.h, gdbarch.c: Re-generate.

Mon Apr 17 11:26:01 2000  Andrew Cagney  <[email protected]>

	* remote.c (REMOTE_TRANSLATE_XFER_ADDRESS), mem-break.c
 	(MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT), target.h
 	(BREAKPOINT_FROM_PC), valops.c (COERCE_FLOAT_TO_DOUBLE),
 	gdbarch.sh (D10V_MAKE_DADDR, D10V_MAKE_IADDR,
 	FRAMELESS_FUNCTION_INVOCATION, REGISTER_CONVERTIBLE,
 	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
 	REGISTER_NAME), findvar.c (POINTER_TO_ADDRESS,
 	ADDRESS_TO_POINTER): Delete default definition.  Handled by
 	gdbarch.

	* gdbarch.sh: Make multi-arch defaults, defaults for non-
 	multi-arch targets.
	(REGISTER_NAME, COERCE_FLOAT_TO_DOUBLE, REGISTER_CONVERTIBLE,
 	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW,
 	D10V_MAKE_DADDR, D10V_MAKE_IADDR, BREAKPOINT_FROM_PC,
 	MEMORY_INSERT_BREAKPOINT, MEMORY_REMOVE_BREAKPOINT,
 	REMOTE_TRANSLATE_XFER_ADDRESS, FRAMELESS_FUNCTION_INVOCATION):
 	Provide default/legacy implementation.
	(REGISTER_NAMES, CALL_DUMMY): Allow legacy definition.
	* gdbarch.h, gdbarch.c: Re-generate.

2000-04-16  Jim Blandy  <[email protected]>

	* findvar.c (store_typed_address, extract_typed_address): Fix
	function names in error messages.

2000-04-16  Eli Zaretskii  <[email protected]>

	* config/djgpp/config.sed: Fix the lines which edit clean: and
        uninstall-info: targets.

2000-04-14  Jim Blandy  <[email protected]>

	Bring IEEE_FLOAT under gdbarch's control.
	* gdbarch.sh (IEEE_FLOAT): New entry.
	* gdbarch.c, gdbarch.h: Regenerated.
	* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
	(print_floating): Use IEEE_FLOAT as if it were an expression; use
 	the code specific to IEEE-format numbers whenever the value of
 	IEEE_FLOAT is non-zero.
	* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
 	config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
 	config/h8300/tm-h8300.h, config/i386/tm-i386.h,
 	config/i960/tm-i960.h, config/m88k/tm-m88k.h,
 	config/mips/tm-mips.h, config/pa/tm-hppa.h,
 	config/sparc/tm-sparc.h, config/delta/tm-delta.h,
 	config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
	IEEE_FLOAT, make sure they give it the value (1).

	Provide the hooks needed to support architectures on which
	pointers are not always simple byte addresses.

	* gdbarch.sh (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Two new
	functions which architectures can redefine, defaulting to
	generic_pointer_to_address and generic_address_to_pointer.
	* findvar.c (extract_typed_address, store_typed_address,
	generic_pointer_to_address, generic_address_to_pointer): New
	functions.
	(POINTER_TO_ADDRESS, ADDRESS_TO_POINTER): Provide default
	definitions.
	(extract_address, store_address): Doc fixes.
	* values.c (value_as_pointer): Doc fix.
	(value_from_pointer): New function.
	* defs.h (extract_typed_address, store_typed_address): New
	declarations.
	* inferior.h (generic_address_to_pointer,
	generic_pointer_to_address): New declarations.
	* value.h (value_from_pointer): New declaration.
	
	The following changes are all of the general form "Use these
	functions instead of these other functions."  In each case, the
	change is because the new calls provide enough information to do
	the appropriate address / pointer conversions, where the old calls
	did not, or because the new functions are more appropriately named
	for the operation being performed.
	
	* ax-gdb.c (const_var_ref): Use value_from_pointer, not
	value_from_longest.
	* blockframe.c (generic_push_dummy_frame): Use read_pc and
	read_sp, not read_register.
	* c-valprint.c (c_val_print): Use extract_typed_address instead of
	extract_address to extract vtable entries and references.
	* cp-valprint.c (cp_print_value_fields): Use value_from_pointer
	instead of value_from_longest to extract the vtable's address.
	* eval.c (evaluate_subexp_standard): Use value_from_pointer
	instead of value_from_longest to compute `this', and for doing
	pointer-to-member dereferencing.
	* findvar.c (read_register): Use extract_unsigned_integer, not
	extract_address.
	(read_var_value): Use store_typed_address instead of store_address
	for building label values.
	(locate_var_value): Use value_from_pointer instead of
	value_from_longest.
	* hppa-tdep.c (find_stub_with_shl_get): Use value_from_pointer,
	instead of value_from_longest, to build arguments to __d_shl_get.
	* printcmd.c (set_next_address): Use value_from_pointer, not
	value_from_longest.
	(x_command): Use value_from_pointer, not value_from_longest.
	* tracepoint.c (set_traceframe_context): Use value_from_pointer,
	not value_from_longest.
	* valarith.c (value_add, value_sub): Use value_from_pointer, not
	value_from_longest.
	* valops.c (find_function_in_inferior, value_coerce_array,
	value_coerce_function, value_addr, hand_function_call): Same.
	* value.h (COERCE_REF): Use unpack_pointer, not unpack_long. 
	* values.c (unpack_long): Use extract_typed_address to produce
	addresses from pointers and references, not extract_address.
	(value_from_longest): Use store_typed_address instead of
	store_address to produce pointer and reference values.

2000-04-13  Mark Kettenis  <[email protected]>

	* acconfig.h (HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T,
	HAVE_PSADDR_T): Add them here instead of in config.in.

	* acconfig.h (PRFPREGSET_T_BROKEN): New define.
	* configure.in: Add check for broken prfpregset_t type.
	* lin-thread.c (gdb_prfpregset): New typedef, depends on
	definition of PRFPREGSET_T_BROKEN.
	(ps_lgetfpregs, ps_lsetfpregs, p_td_thr_getfpregs,
	p_td_thr_setfpregs, thread_db_fetch_registers,
	thread_db_store_registers): Use gdb_prfpregset_t instead of
	prfpregset_t.
	* config.in: Regenerated.
	* configure: Regenerated.

2000-04-13  DJ Delorie  <[email protected]>

	* mips-tdep.c (do_fp_register_row): copy the number of bytes
	allocated, not the size of the pointer.

2000-04-13  Peter Schauer  <[email protected]>

	* config/i386/nm-i386sol2.h (CANNOT_STEP_HW_WATCHPOINTS):  Define.
	* config/i386/tm-i386sol2.h (HAVE_I387_REGS):  Define.
	* i386v4-nat.c (supply_fpregset, fill_fpregset):  Add code
	to handle floating point registers if NUM_FREGS is not zero.

2000-04-13  Nick Duffek  <[email protected]>

	* sol-thread.c (init_sol_core_ops): Initialize to_thread_alive
	and document to_find_new_threads bug.

2000-04-13  Eli Zaretskii  <[email protected]>

	* infrun.c (proceed, normal_stop): Change the error message about
	failure to insert breakpoints/watchpoints so that it makes sense
	even if ptrace is not used or no other processes can be active.

Thu Apr 13 13:24:27 2000  Andrew Cagney  <[email protected]>

	* configure.in: Add --enable-maintainer-mode.
	* aclocal.m4, configure: Re-generate.

	* Makefile.in ($(srcdir)/copying.c): Enable dependencies only when
 	on maintainer-mode.  Update copying.c in source directory.
	(copying.txt): Delete rule.
	(copying.o): Add explict paths to $(srcdir) and explicit make
 	rule.

2000-04-12  Kevin Buettner  <[email protected]>

	* ia64-linux-nat.c (IA64_PSR_DB, IA64_PSR_DD): Define.
	(fetch_debug_register, fetch_debug_register_pair,
	store_debug_register, store_debug_register_pair, is_power_of_2,
	enable_watchpoints_in_psr, ia64_linux_insert_watchpoint,
	ia64_linux_remove_watchpoint, ia64_linux_stopped_by_watchpoint):
	New functions.
	* config/ia64/nm-linux.h (TARGET_HAS_HARDWARE_WATCHPOINTS,
	TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_STEPPABLE_WATCHPOINT,
	STOPPED_BY_WATCHPOINT, target_insert_watchpoint,
	target_remove_watchpoint): Define.
	(ia64_linux_stopped_by_watchpoint, ia64_linux_insert_watchpoint,
	ia64_linux_remove_watchpoint): Declare.

2000-04-12  Eli Zaretskii  <[email protected]>

	* go32-nat.c (go32_insert_hw_breakpoint): When there are no more
	hardware breakpoint resources, return EBUSY.
	(go32_handle_nonaligned_watchpoint): If the argument WHAT is not
	one of the enumerated values, return EINVAL.

2000-04-12  Eli Zaretskii  <[email protected]>

	* README: Mention special build instructions for DJGPP.
	* NEWS: Update with FP features on x87 platforms, and
	DJGPP-related changes.

2000-04-12  Eli Zaretskii  <[email protected]>

	* top.c (gdb_completer_file_name_break_characters): New variable.
	(line_completion_function): When completing on file names, use
	gdb_completer_file_name_break_characters as word break
	characters for the readline library.

2000-04-12  Mark Kettenis  <[email protected]>

	* i387-tdep.c (print_i387_value): Avoid call to
	floatformat_to_doublest if long double type is the same on host
	and target.

2000-04-11  Fernando Nasser  <[email protected]>

	* wrapper.h: Remove definitions of internal functions.
	* wrapper.c: Remove definitions of exported functions (which are
	already in wrapper.h) and make static all internal wrap_* functions.

Mon Apr 10 21:58:36 2000  Andrew Cagney  <[email protected]>

	* acconfig.h (USE_INCLUDED_REGEX): Add.
	* Makefile.in (REGEX_CFLAGS): Delete
	* configure.in (REGEX_CFLAGS): Delete. Use AC_DEFINE instead.
	* configure, config.in: Re-generate.

2000-04-10  Philip Blundell <[email protected]>

	* arm-linux-nat.c (arm_skip_solib_resolver): Remove and move to
	arm-linux-tdep.c.
	* arm-linux-tdep.c (arm_skip_solib_resolver): New.

2000-04-10  Fernando Nasser  <[email protected]>

	From 2000-04-10 Rodney Brown <[email protected]>:
	* command.h (enum command_class): Remove trailing "," to placate
	AIX xlc.

Mon Apr 10 20:17:32 2000  Andrew Cagney  <[email protected]>

	* TODO, NEWS: Update.  Mention MI.

Mon Apr 10 00:21:09 2000  Andrew Cagney  <[email protected]>

	* gdbarch-utils.h, gdbarch-utils.c: Delete.
	* arch-utils.h, arch-utils.c: New files.  Avoid 14 character file
 	name problems.
	* Makefile.in: Update.
	* gdbarch.c: Update.

Sun Apr  9 23:42:16 2000  Andrew Cagney  <[email protected]>

	From 2000-04-07 Jonathan Larmour <[email protected]>:
	* mips-tdep.c (saved_gpreg_size_enums): Define enum command for
	new "set mips saved-gpreg-size" command
	(MIPS_SAVED_REGSIZE): Now a function mips_saved_regsize()
	(MIPS_DEFAULT_SAVED_REGSIZE): Define for default MIPS_SAVED_REGSIZE,
	either from target, or gdb multi-arch
	(show_mips_command): New. For "show mips" prefix command
	(set_mips_command): New. For "show mips" prefix command
	(_initialize_mips_tdep): Add top-level mips prefix command
	Add "set mips saved-gpreg-size" command

	* mips-tdep.c (struct gdbarch_tdep): Rename mips_saved_regsize to
 	mips_default_saved_regsize.
	(mips_gdbarch_init): Update.
	(MIPS_DEFAULT_SAVED_REGSIZE): Update.
	(mips_gdbarch_init): Use MIPS_REGSIZE as the default value for
 	mips_default_saved_regsize.

Sun Apr  9 23:27:00 2000  Andrew Cagney  <[email protected]>

	From 2000-04-07 J.T. Conklin <[email protected]>:
	* lynx-nat.c (fetch_inferior_registers, store_inferior_registers):
	replace calls to target_xfer_memory() with target_read_memory()
	and target_write_memory().

Sun Apr  9 22:54:29 2000  Andrew Cagney  <[email protected]>

	* valops.c (value_rtti_type): Compare VALUE_ADDRESS with ``0'' not
 	NULL. Macro returns a CORE_ADDR.

2000-04-08  Jim Blandy  <[email protected]>

	* dwarf2read.c: Revert Andrew Cagney's change of Dec 15, 1997.
	Don't include "bfd-elf.h".
	(address_significant_size): Delete variable.
	(dwarf2_build_psymtabs_hard): Don't set it, or check for
	consistency between it and the Dwarf 2 compilation unit header
	address size.
	(read_address): Don't mask off bits above
	address_significant_size.
	* Makefile.in (dwarf2read.o): Don't depend on $(elf_bfd_h).
	(elf_bfd_h): Remove variable; it's no longer used.

2000-04-08  Peter Schauer  <[email protected]>

	* configure.in (NEW_PROC_API):  Escape square brackets when testing
	for solaris2.[678].
	* configure:  Regenerate.

2000-04-07  Scott Bambrough <[email protected]>

	* ChangeLog: Correct date on last entry.
	* arm-linux-tdep.c (arm_linux_push_arguments): New function.
	* config/arm/tm-linux: Redefined PUSH_ARGUMENTS for Linux.  
	* config/arm/tm-embed: Fix build warning from redefinition of
	LOWEST_PC.
	* config/arm/tm-arm.h: Remove TARGET_BYTE_ORDER_SELECTABLE.
	* config/arm/tm-wince.h: Remove TARGET_BYTE_ORDER_SELECTABLE and 
	TARGET_BYTE_ORDER.  Add TARGET_BYTE_ORDER_SELECTABLE_P to 
	override default in tm-arm.h.  Use default target byte order
	from tm-arm.h.

2000-04-07  Scott Bambrough <[email protected]>

	* Makefile.in: Add dependency information for arm-linux-tdep.c.
	* config/djgpp/fnchange.lst: Add arm-linux-tdep.c, arm-linux-nat.c.

2000-04-07  Peter Schauer  <[email protected]>

	* sol-thread.c (gdb_ps_addr_t):  New typedef, depends on definition
	of PROC_SERVICE_IS_OLD.
	(ps_pglobal_lookup, ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite,
	rw_common):  Change argument type from psaddr_t to gdb_ps_addr_t.

Fri Apr  7 17:18:42 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (CFLAGS): Set using configure.

	* configure.in (WARN_CFLAGS): Enable by default when GCC.
	* configure: Re-generate.

Fri Apr  7 13:33:43 2000  Andrew Cagney  <[email protected]>

	From 2000-03-27 Peter Schauer <[email protected]>:
        * procfs.c (init_procfs_ops):  Set procfs_ops.to_has_memory and
        procfs_ops.to_has_all_memory to 1.

	* TODO: Update

2000-04-06  Nick Duffek  <[email protected]>

	* configure.in (_MSE_INT_H): Define on Solaris 7.
	(NEW_PROC_API): Define on Solaris 7 and 8 as well as 6.
	* acconfig.h (_MSE_INT_H): Define on Solaris 7.
	* configure: Regenerate.
	* config.in: Regenerate.

2000-04-06  Michael Snyder  <[email protected]>

	* sol-thread.c (GET_LWP, GET_THREAD, BUILD_LWP, BUILD_THREAD):
	Change to rely on PIDGET etc.
	* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS, 
	TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
	STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
	define.  Allow target to use procfs hardware watchpoints.
	* config/sparc/nm-sun4sol2.h: ditto.
	* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
	definitions to use 16 bits for the pid, 15 bits for the tid, and
	1 bit for the flag.
	* config/sparc/tm-sun4sol2.h: ditto.
	(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
	* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
	for more than 15 thread increments.

2000-04-06  Eli Zaretskii  <[email protected]>

	* top.c (filename_completer): Set subsequent_name to 1 early on,
	to prevent an infinite loop if the first file in the directory is
	a backup file (whose name ends in a `~').

2000-04-05  Jim Blandy  <[email protected]>

	* solib.c (update_solib_list): New function.
	(solib_add): Call update_solib_list, and then read symbols.
	(info_sharedlibrary_command): Call update_solib_list, not
	solib_add.

2000-04-05  Scott Bambrough <[email protected]>

	* arm-linux-tdep.c: Resolve implicit function declarations by 
	including target.h and value.h.  Inclusion of symtab.h is
	no longer needed.

2000-04-05  Scott Bambrough <[email protected]>

	* arm-linux-tdep.c: New file.
	* arm-linux-nat.c (fetch_fpregs): Remove unused code.
	(arm_get_longjmp_target): Moved it and all defines 
	it uses to arm-linux-tdep.c.
	(arm_linux_extract_return_value): Moved to
	arm-linux-tdep.c.
	* config/arm/linux.mt: Add arm-linux-tdep.c to TDEPFILES.

2000-04-04  Nick Duffek  <[email protected]>

	* infrun.c (handle_inferior_event): Call target_mourn_inferior
	instead of kill_target.

2000-04-04  Daniel Berlin  <[email protected]>

	* TODO: Make note of various C++ things i have planned for 5.1.

Tue Apr  4 12:13:19 2000  Andrew Cagney  <[email protected]>

	* printcmd.c (print_scalar_formatted): Use local variable ptr_bit
 	in shift.  Stop GCC thinking it has a shift overflow.

2000-04-03  H.J. Lu  <[email protected]>

	* TODO: Remove the regex entry.

2000-04-03  H.J. Lu  <[email protected]>

	* gdb_regex.h: New. Include "regex.h" if USE_INCLUDED_REGEX
	is defined and <regex.h> otherwise.

        * irix5-nat.c: Include "gdb_regex.h" instead of "gnu-regex.h".
	* monitor.c: Likewise.
	* osfsolib.c: Likewise.
	* solib.c: Likewise.
	* source.c: Likewise.
	* symtab.c: Likewise.

	* Makefile.in (REGEX): Changed to @REGEX@.
	(REGEX_CFLAGS): New.
	(REGEX1): Removed.
	(ADD_DEPS): Use $(REGEX) instead of $(REGEX1).
	(INTERNAL_WARN_CFLAGS): Add $(REGEX_CFLAGS).

	* configure.in (--with-included-regex): New switch.
	(REGEX): New. Subsstitue @REGEX@ in Makefile.in.
	(REGEX_CFLAGS): New. Subsstitue @REGEX_CFLAGS@ in Makefile.in.
	* configure: Regenerated.

2000-04-03  Kevin Buettner  <[email protected]>

	* NEWS (powerpc-*-linux*): Mention.

2000-04-03  J.T. Conklin  <[email protected]>

	* config/i386/xm-nbsd.h (HOST_LONG_DOUBLE_FORMAT): Define.

2000-04-03  Kevin Buettner  <[email protected]>

	* Makefile.in (ALLDEPFILES): Add ia64-linux-nat.c and ia64-tdep.c.
	(ia64-linux-nat.o, ia64-tdep.o): Add dependencies.

	* ia64-linux-nat.c (fill_gregset): Implement.
	(supply_fpregset, fill_fpregset): New functions.

	* ia64-tdep.c (ia64_init_extra_frame_info): Revise manner in
	which the CFM is fetched for certain frames.
	(find_global_pointer, find_extant_func_descr): Don't use
	partial symtabs for locating sections.

	* config/ia64/linux.mh (LOADLIBES): Define.
	(NATDEPFILES): Add linux-thread.o and lin-thread.o.
	* config/ia64/nm-linux.h (nm-linux.h): Include this upper-level
	file containing generic linux declarations/definitions.
	(SVR4_SHARED_LIBS, ATTACH_DETACH): Remove defines; already
	defined in generic nm-linux.h.
	(solib.h): Remove include; already included in generic nm-linux.h.

2000-04-03  Jim Blandy  <[email protected]>

	* solib.c (solib_add): Move all the code for loading symbol tables
	below the code to sort out additions and removals.  That way, we
	always catch all loaded shared libraries whose symbols we haven't
	grabbed yet.

	* solib.c (solib_add): Don't try to free a shared object's objfile
	if it doesn't have one.  Duh.

	* solib.c (solib_add): If a pattern was given, but it doesn't
	match any currently loaded shared libraries, print a message;
	don't just be silent.

2000-04-03  Eli Zaretskii  <[email protected]>

	* go32-nat.c (go32_handle_nonaligned_watchpoint): Use a
	two-dimensional array instead of faking it with index
	arithmetics.

2000-04-03  Eli Zaretskii  <[email protected]>

	* config/i386/xm-go32.h (HOST_LONG_DOUBLE_FORMAT): Define.

	* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
	definition (and use the common one in tm-i386.h).
	(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
	(I386_DJGPP_TARGET): Don't define, it's no longer required.
	(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
	i386-tdep.c defines it for all x86 targets.
	(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.

	* config/djgpp/fnchange.lst: Add i386-linux-tdep.c.

	* config/djgpp/djcheck.sh: Edit the copyright year out of the test
	results.  Fix editing of `main' arguments for non-GNU Sed.

2000-04-03  Eli Zaretskii  <[email protected]>

	* symfile.c (map_overlay_command, unmap_overlay_command): Fix
	error message: there's no "overlay on" command.

2000-04-03  Eli Zaretskii  <[email protected]>

	* Makefile.in (copying.c): Depend on copying.txt, not COPYING.
	(copying.txt): New target, a link to COPYING.

Mon Apr  3 18:20:03 2000  Andrew Cagney  <[email protected]>

	* TODO: Update.
	
Mon Apr  3 14:56:11 2000  Andrew Cagney  <[email protected]>

	* top.c: Re-indent.
	(set_hook, error_hook): Remove PARAMS.

Mon Apr  3 14:45:25 2000  Andrew Cagney  <[email protected]>

	* symtab.h (add_minsym_to_demangled_hash_table): Revert 2000-03-29
 	Daniel Berlin <[email protected]>.  Function was static.
	* minsyms.c (add_minsym_to_demangled_hash_table): Add prototype.

Mon Apr  3 14:10:37 2000  Andrew Cagney  <[email protected]>

	* gdb-events.h, gdb-events.c, gdb-events.sh: Re-indent.

2000-04-02  Nick Duffek  <[email protected]>

	* gdbtypes.c (safe_parse_type): New wrapper function to ignore
	error() during parse_and_eval_type().
	(check_stub_method): Call safe_parse_type instead of
	parse_and_eval_type().
	* wrapper.c (gdb_parse_and_eval_type): New wrapper function.
	(wrap_parse_and_eval_type): New support function.
	* wrapper.h (gdb_parse_and_eval_type): Prototype.
	(wrap_parse_and_eval_type): Prototype.

Sun Apr  2 10:32:54 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Eli Zaretskii is a doco maintainer.

Fri Mar 31 08:59:58 2000  Andrew Cagney  <[email protected]>

	* gdbarch-utils.h, gdbarch-utils.c: New files.
	* Makefile.in (SFILES, COMMON_OBS): Update.
	(gdbarch_utils_h) Define.
	(gdbarch-utils.o): Add dependencies.
	
	* gdbarch.c, gdbarch.sh: Include "gdbarch-utils.h". Fix code
 	handling default method values.
	(startup_gdbarch): Rename default_gdbarch, name misleading.
	(breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
	(register_name): Default to legacy_register_name.
	(call_dummy_words): Default to legacy_call_dummy_words.
	(sizeof_call_dummy_words): Default to
 	legacy_sizeof_call_dummy_words.
	(register_convertible): Default to
 	generic_register_convertible_not.
	(breakpoint_from_pc): Default to legacy_breakpoint_from_pc.
	(remote_translate_xfer_address): Default to
 	generic_remote_translate_xfer_address.
	(frameless_function_invocation): Default to
 	generic_frameless_function_invocation_not.

2000-04-02  Mark Kettenis  <[email protected]>

	* i386-linux-nat.c: Add copyright notice.

	* config/i386/xm-linux.h (HOST_LONG_DOUBLE_FORMAT): Define as
	&floatformat_i387_ext.
	* config/i386/xm-i386gnu.h (HOST_LONG_DOUBLE_FORMAT): Likewise.

2000-03-29  Mark Kettenis  <[email protected]>

	* findvar.c (extract_floating): Remove reference to
	TARGET_EXTRACT_FLOATING.
	(store_floating): Remove reference to TARGET_STORE_FLOATING.

2000-03-30  Fernando Nasser  <[email protected]>

	* wrapper.c (gdb_value_subscript, wrap_value_subscript): New functions.
	Safe version of value_subscript.
	* varobj.c (): Use gdb_value_subscript() to get an array element value.

2000-03-30  Michael Snyder  <[email protected]>

	* ui-file.c: Include "gdb_string.h"
	* cli-out.c: Include gdb_string.h to avoid compiler warnings.
	* wrapper.[ch] (struct gdb_wrapper_arguments): Change fields into 
	unions, since they are all used to hold both pointers and ints
	at various times.  Casting pointer to int and vice versa gives
	warnings (and is not safe) if they are not the same size.
	
2000-03-30  Michael Snyder  <[email protected]>

	* defs.h (struct continuation_arg): Make 'data' a union, to avoid
	casting problems when int and pointer are not the  same size.
	* event-top.c (command_handler): Use data as a union.
	(command_line_handler_continuation): Ditto.
	* infcmd.c (step_1_continuation): Use data as a union.  Re-indent.
	(step_once): ditto.  (finish_command_continuation): Ditto.
	(finish_command): Ditto.  
	* breakpoint.c (until_break_command): Use data as a union.
	(until_break_command_continuation): Ditto.
	* utils.c (add_intermediate_continuation): Fix typo in comment.

Thu Mar 30 12:09:50 2000  Andrew Cagney  <[email protected]>

	* gdbarch.h, gdbarch.c: Re-indent.  Remove FIXMEs.
	* gdbarch.sh: Re-sync with gdbarch.[hc].

2000-03-29  Daniel Berlin  <[email protected]>

	* minsyms.c (add_minsym_to_demangled_hash_table): New function.
	(install_minimal_symbols): Fix demangled symbol problems caused by
	using add_minsym_to_hash_table for the demangled names, which is
	wrong. Now we use add_minsym_to_demangled_hash_table.
	(lookup_minimal_symbol): Fix problems with demangled symbol lookup
	caused by weird control flow.
	* symtab.h: Add add_minsym_to_demangled_hash_table prototype here.

2000-03-29  Jason Merrill  <[email protected]>

	* configure.in: -linux-gnu*, not -linux-gnu.

Tue Mar 28 18:28:40 2000  Andrew Cagney  <[email protected]>

	* remote.c (remote_threads_extra_info): Replace qfThreadExtraInfo
 	with qThreadExtraInfo.

2000-03-29  J.T. Conklin  <[email protected]> 
 
	* i386nbsd-nat.c (fetch_core_registers): Make static. 
 
	* m68knbsd-nat.c (fetch_core_registers): Make static. 
	(m68knbsd_core_fns, _initialize_m68knbsd_nat): Added. 
 
Wed Mar 29 13:40:40 2000  Andrew Cagney  <[email protected]>

	* TODO: Update GDB 5 status.

Wed Mar 29 10:16:35 2000  Andrew Cagney  <[email protected]>

	* breakpoint.h (remove_hw_watchpoints): Add declaration.
	* breakpoints.c (remove_hw_watchpoints): Update.
	* maint.c (maintenance_do_deprecate): Avoid assignment within IF
 	condition.

2000-03-28  Peter Schauer  <[email protected]>

	breakpoint.c, breakpoint.h (remove_hw_watchpoints):  New function.
	infrun.c (resume):  Remove hardware watchpoints before stepping
	when CANNOT_STEP_HW_WATCHPOINTS is nonzero.

2000-03-28  Michael Snyder  <[email protected]>

	* Makefile.in: Anchor tui-file.h dependency to $srcdir.

2000-03-28  Peter Schauer  <[email protected]>

	* procfs.c (proc_set_watchpoint):  Declare addr parameter as
	CORE_ADDR, to match call from procfs_set_watchpoint.

	* breakpoint.c (insert_breakpoints, do_enable_breakpoint):  
	Reselect the saved frame silently after frame selection for 
	watchpoint evaluation.
	(insert_breakpoints):  Add missing space in `Hardware watchpoint
	deleted' message.  Do not reinsert hardware watchpoint if it is
	already marked for deletion at next stop.

2000-03-28  Christopher Faylor  <[email protected]>

        * partial-stab.h: Add one more check against corrupted or irregular
        stabs entry.

Tue Mar 28 12:23:37 2000  Philippe De Muyter  <[email protected]>

	* gnu-regex.c (regerror): Function renamed from `__regerror'.
	(Change also approved in the mainline glibc sources)

Tue Mar 28 18:19:50 2000  Andrew Cagney  <[email protected]>

	From 2000-03-20 Jonathan Larmour <[email protected]>:
        * ser-unix.c (do_unix_readchar): Reorganise to be more robust,
        particularly ensuring it can't return SERIAL_TIMEOUT when told
        not to time out.

2000-03-24  Daniel Berlin  <[email protected]>

	* gdbtypes.c (_initialize_gdbtypes): Add "set debug overload",
	which never existed before, and thus, has no deprecated old command.

	* gdbarch.c (_initialize_gdbarch): Add "set debug arch", deprecate
	"set archdebug" (same goes for the show commands).
	* gdb-events.c (_initialize_gdb_events): Add "set debug event",
	deprecate "set eventdebug" (same goes for the show commands).
	* gdbcmd.h: Add the setdebuglist and showdebuglist externs.
	* top.c (init_main): Deprecate remotedebug, use "set/show debug remote"
	instead.
	x(init_main): Add the "set debug" and "show debug" commands.
	Add setdebuglist and showdebuglist.

Fri Mar 24 13:00:10 2000  Daniel Berlin <[email protected]>

	* maint.c (maintenance_do_deprecate): Fix crash if you call with no arguments, and fixed the warning.
	  Added prototype for the deprecate command so it doesn't complain.

Tue Mar 28 11:52:45 2000  Andrew Cagney  <[email protected]>

	* top.c (print_gdb_version): Bump copyright year to 2000.

Tue Mar 28 10:13:11 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Glen McCready to write after approval list.

Tue Mar 28 09:59:00 2000  Andrew Cagney  <[email protected]>

	* acconfig.h: Fix typo in comment describing HAVE_PTRACE_GETREGS.
	* config.h: Regenerate.
	
Mon Mar 27 19:53:29 2000  Andrew Cagney  <[email protected]>

	* TODO: Update.  Add criteria for next release of GDB.

Mon Mar 27 17:20:25 2000  Andrew Cagney  <[email protected]>

	* acconfig.h: Provide default for HAVE_PTRACE_GETREGS.
	* config.h: Regenerate.

Mon Mar 27 16:43:35 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (install-only): Create $(bindir) and $(man1dir)
 	before installing GDB.

Mon Mar 27 16:26:11 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (all-gdbtk): Check for an existing link/directory.
  	Re-format warning message.  Document that post 5.0 this can be
 	deleted.

Mon Mar 27 14:46:37 2000  Andrew Cagney  <[email protected]>

	* ChangeLog: Revert whitespace changes.

Mon Mar 27 10:20:34 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Update folks who need accounts.

Mon Mar 27 09:29:14 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: J.T. Conklin is NetBSD maintainer.

2000-03-27  Mark Kettenis  <[email protected]>

	* config/i386/tm-i386.h: Fix typo.  It is TARGET_LONG_DOUBLE_BIT
	instead of TARGET_LONG_DOUBLE_BITS.
	* config/i386/tm-i386mk.h: Likewise.

2000-03-26  Mark Kettenis  <[email protected]>

	Provide `long double' support for most i386 targets.
	* config/i386/tm-i386.h (TARGET_LONG_DOUBLE_FORMAT): Define as
	&floatformat_i387_ext.
	(TARGET_LONG_DOUBLE_BITS): Define as 96.
	(REGISTER_VIRTUAL_TYPE): Change type for FPU registers to
	`builtin_type_long_double'.
	(REGISTER_CONVERT_TO_VIRTUAL): Call
	i386_register_convert_to_virtual.
	(REGISTER_CONVERT_TO_RAW): Call i386_register_convert_to_raw.
	(i387_to_double, double_to_i387): Remove prototypes.
	(i386_extract_return_value): Change prototype to match definition
	in i386-tdep.c.
	* config/i386/tm-i386mk.h (TARGET_LONG_DOUBLE_FORMAT): #undef.
	(TARGET_LONG_DOUBLE_BITS): #undef.
	* config/i386/tm-linux.h (TARGET_LONG_DOUBLE_BIT): Remove.
	[HAVE_LONG_DOUBLE && HOST_I386] (LD_I387): Remove.
	(i387_extract_floating, i387_store_floating): Remove prototypes.
	(TARGET_EXTRACT_FLOATING, TARGET_STORE_FLOATING): Remove.
	(REGISTER_CONVERT_TO_VIRTUAL, REGOISTER_CONVERT_TO_RAW): Remove.
	(REGISTER_VIRTUAL_TYPE): Remove.
	* i386-tdep.c (i386_register_convert_to_virtual): New function.
	(i386_register_convert_to_raw): New function.
	* i387-tdep.c [LD_I387] (i387_extract_floating): Remove.
	(i387_store_floating): Remove.

Sat Mar 25 18:55:57 2000  Andrew Cagney  <[email protected]>

	* maint.c: Re-indent.

Sat Mar 25 18:51:50 2000  Andrew Cagney  <[email protected]>

	* maint.c (_initialize_maint_cmds): Remove quoted trailing space.

2000-03-24  Christopher Faylor  <[email protected]>

	* config/mips/tm-wince.h: Fix typo which caused include of tm-mips.h to
	be inoperative.

2000-03-24  Christopher Faylor  <[email protected]>

	* win32-nat.c: Back out special frame walking code.  It was broken.
	(handle_exception): Correctly identify an illegal instruction.
	* config/tm-cygwin.h: Eliminate special frame handling.  Just use
	normal i386 handling.

2000-03-24  J.T. Conklin  <[email protected]> 
 
	* i386/tm-nbsd.h (USE_STRUCT_CONVENTION): Define. 
	* i386nbsd-nat.c (i386nbsd_use_struct_convention): New function. 
	(fetch_core_registers): Read fp registers. 
	(i386nbsd_core_fns, _initialize_i386nbsd_nat): Added. 
 
2000-03-24  Jonathan Larmour  <[email protected]>

	* arm-tdep.c (thumb_skip_prologue): Take function end addr argument
	so that we can stop searching for the prologue past the function end
	(arm_skip_prologue): Call thumb_skip_prologue with function end addr

2000-03-24  Kevin Buettner  <[email protected]>

	* linux-thread.c, lin-thread.c (save_inferior_pid,
	restore_inferior_pid): Don't do compile time comparison
	of TARGET_PTR_BIT and TARGET_INT_BIT.

Thu Mar 23 13:18:26 2000  Philippe De Muyter  <[email protected]>

	* m68k-tdep.c (P_LINKL_FP, P_LINKW_FP): Macros renamed from P_LINK_L
	and P_LINK_W.
	(P_PEA_FP, P_MOVL_SP_FP): New macros.
	(P_MOVL, P_LEAL, P_MOVML): Macros renamed from P_MOV_L, P_LEA_L and
	P_MOVM_L.
	(altos_skip_prologue, isi_skip_prologue): Use P_* macros, not octal
 	constants.
	(delta68_in_sigtramp): New function.
	(delta68_frame_args_address, delta68_frame_saved_pc): Ditto.
	(m68k_skip_prologue): Use P_* macros, not hex constants.
	(m68k_find_saved_regs): Do not expect a fixed sequence of register save
	instructions, but accept them in any order; use P_* macros, not octal
	or hex constants; recognize also `fmovemx to (fp + displacement)' and
 	`moveml to (fp + displacement)'.
	* m68/tm-delta68.h (IN_SIGTRAMP): New macro.
	(FRAME_SAVED_PC, FRAME_ARGS_ADDRESS): Ditto.
	
Fri Mar 24 13:44:57 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Fernando Nasser to testsuite maintainers. 
	
2000-03-23  Michael Snyder  <[email protected]>

	* solib.c (open_symbol_file_object): To sneak an int argument
	past catch_errors, instead of casting it to a pointer, simply
	pass it by address.

2000-03-23  Jimmy Guo	<[email protected]>

 	* gdbtypes.c (rank_function): Rank all N parameters and use correct
 	index into the prams[] and args[] arrays.

2000-03-23  Fernando Nasser  <[email protected]>

	From David Whedon <[email protected]>

	* top.c (execute_command): Checks all commands beore executing
	to see if the user needs to be warned that the command is
	deprecated, warns user if appropriate.
	(add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
	return values from void to struct cmd_list_element *.
	* command.c (lookup_cmd_1): Check aliases before following link 
	in case user needs to be warned about a deprecated alias.
	(deprecate_cmd): new exported function for command deprecation,
	sets flags and posibly a replacement string.
	(deprecated_cmd_warning): New exported funciton to warn user about
	a deprecated command. 
	(lookup_cmd_composition): New exported function that determines
	alias, prefix_command, and cmd based on a string.  This is useful
	is we want to full name of a command.
	* command.h : Added prototypes for deprecate_cmd,
	deprecated_warn_user and lookup_cmd_composition, added flags to
	the cmd_list_element structure, changed return values for
	add_com_* and add_info_* from void to cmd_list_element.
	* maint.c : (maintenance_deprecate): New function to deprecate a
	command.  This exists only so that the testsuite can deprecate
	commands at runtime and check the warning behavior.
	(maintenance_undeprecate) : New function, drops deprecated flags.
	(maintenance_do_deprecate): Actually does the (un)deprecation.
	(initialize_maint_cmds): Added the above new deprecate commands.

2000-03-22  Daniel Berlin  <[email protected]>
	* command.c (apropos_cmd_helper): New function, meat of the
	apropos command.
	(apropos_command): New apropos command to search command
	names/documentation for regular expressions.
	(_initialize_command): Add the apropos command.

2000-03-23  Michael Snyder  <[email protected]>

	* sol-thread.c (ps_pglobal_lookup): Change argument type from
	paddr_t to psaddr_t.  This mistake appears to date from an
	erroneous man page in Solaris 2.5 -- the correct type from the
	system headers has always been psaddr_t.
	(ps_pdread, ps_pdwrite, ps_ptread, ps_ptwrite): Ditto.
	(rw_common): Ditto.

2000-03-22  Kevin Buettner  <[email protected]>

	* ia64-linux-nat.c: Fix copyright.
	(fill_gregset): Minor formatting fix.
	* ia64-tdep.c (template_encoding_table, fetch_instruction,
	examine_prologue): Clean up some compiler warnings.
	(is_float_or_hfa_type_recurse, is_float_or_hfa_type, find_func_descr,
	find_global_pointer, find_extant_func_descr): New functions.
	(ia64_use_struct_convention, ia64_extract_return_value,
	ia64_push_arguments): Handle HFAs.
	(ia64_push_arguments): Find (or build) a function descriptor
	when given a function address.
	(ia64_push_return_address): Moved code for finding the
	global pointer into its own function, find_global_pointer ().

2000-03-22  Elena Zannoni  <[email protected]>

	* event-loop.c (handle_file_event): Run through indent.

2000-03-22  Elena Zannoni  <[email protected]>

        From  Philippe De Muyter  <[email protected]>

	* event-loop.c (sys/types.h): File now included unconditionally.
	(use_poll): New variable..
	(gdb_notifier): poll- and select-versions merged.
	(add_file_handler): If HAVE_POLL, check whether poll is usable,
	and reset `use_poll' if not.
	(create_file_handler): Select poll- or select-version according to
	`use_poll'.
	(delete_file_handler, handle_file_event): Likewise.
	(gdb_wait_for_event, poll_timers): Likewise.

2000-03-22  Peter Schauer  <[email protected]>

	* printcmd.c (print_scalar_formatted):  Truncate addresses to the
	size of a target pointer before passing them to print_address.

2000-03-22  Mark Kettenis  <[email protected]>

	* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
	* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
	Remove
	* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
	(i386_extract_return_value): Rewritten.  Correctly support all
	floating-point types and large integer types on targets that use
	the standard i386 GDB register layout and return floating-point
	values in the FPU.

Wed Mar 22 15:09:34 2000  Andrew Cagney  <[email protected]>

	* configure.in (CONFIG_INITS): Do not append remote-nrom.c

2000-03-21  J.T. Conklin  <[email protected]> 
 
        * i386/nbsd.mh (NATDEPFILES): Change i386b-nat.o to i386nbsd-nat.o. 
        * i386nbsd-nat.c: New file. 
 
        * i386/tm-nbsd.h (NUM_REGS): Removed. 
        (HAVE_I387_REGS): Defined. 
        * i386/nm-nbsd.h (FLOAT_INFO): Removed. 
 
        * tm-nbsd.h (IN_SOLIB_CALL_TRAMPOLINE): Define if not 
        SVR4_SHARED_LIBS. 

Wed Mar 22 11:18:59 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Jim Blandy to breakpoint maintainers.  David
 	taylor is the Solaris/SPARC maintainer.  Add Jonathan Larmour to
 	the write after approval list.

2000-03-21  Kevin Buettner  <[email protected]>

	* symtab.h (MAX_SECTIONS, struct section_addr_info,
	symbol_file_add):  Move declarations from here...
	* symfile.h: ...to here.

	* solib.c (symbol_add_stub): Make symbol_file_add () aware of
	all section addresses, not just .text.
	* symfile.h, symfile.c (free_section_addr_info,
	build_section_addr_info_from_section_table): New functions.

	* symfile.h (MAX_SECTIONS): Increase value to 40.
	* symfile.c (syms_from_objfile): Add bounds check prior to
	accessing ``other'' array in a section_addr_info_struct.
	Remove unused variable section_offsets.
	(add_symbol_file_command): Remove unused variable text_addr.

2000-03-21  Eli Zaretskii  <[email protected]>

	* breakpoint.c (bpstat_stop_status): Don't stop if a read
	watchpoint appears to break, but the watched value changed.

2000-03-21  Jim Blandy  <[email protected]>

	* gdbarch.sh: Emit a definition and declaration for gdbarch_free,
 	a companion to gdbarch_alloc, which allows a gdbarch init function
 	to free partially-built gdbarch structures.
	* gdbarch.c, gdbarch.h: Regenerated.

2000-03-20  Kevin Buettner  <[email protected]>

	* configure.host, configure.tgt (ia64-*-linux*): New entry.

	* gdbserver/low-linux.c (u_offsets, ia64_register_u_addr,
	initialize_arch): Define for IA-64.
	(initialize_arch): Add declaration.

2000-03-20  Eli Zaretskii  <[email protected]>

	* breakpoint.c (insert_breakpoints, remove_breakpoint)
	(bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
	remove, or check status of hardware watchpoints for entire structs
	and arrays unless the user explicitly asked to watch that struct
	or array.  
	(insert_breakpoints): Try to insert watchpoints for all the values
	on the value chain, even if some of them fail to insert.

	* values.c (value_primitive_field): Set the offset in struct value
	we return when the field is a packed bitfield.

2000-03-20  Michael Snyder  <[email protected]>

	* remote.c (remote_threads_extra_info): New function.
	Implement the extra thread info query for "info threads".
	(remote_threads_info): Clean up a bit.
	(use_threadinfo_query, use_threadextra_query): New variables.
	Control whether GDB will use the new or old protocol for 
	thread info queries.
	(remote_open_1): Initialize new variables.
	(remote_async_open_1): Ditto.
	(remote_cisco_open): Ditto.

2000-03-20  Kevin Buettner  <[email protected]>

	* ia64-linux-nat.c, ia64-tdep.c, config/ia64/linux.mh,
	config/ia64/linux.mt, config/ia64/nm-linux.h, config/ia64/tm-ia64.h,
	config/ia64/tm-linux.h, config/ia64/xm-linux.h: New files.

2000-03-20  Kevin Buettner  <[email protected]>

	* utils.c (floatformat_from_doublest): Don't assume that a long
	will be exactly 32 bits in length.  Also...  make sure space
	that we're writing the float to is completely initialized to
	zeroes, even when the number of bits in the float is not
	evenly divisible by FLOATFORMAT_CHAR_BIT.

2000-03-20  Jim Blandy  <[email protected]>

	* i386-linux-nat.c: No need to #include "frame.h" any more.
	(LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
	LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
	LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
	LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
	LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
	LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
	linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
	i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
	i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
	i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
	i386_linux_sigtramp_saved_sp):	Deleted.  Folks rightly pointed
	out that these are target-dependent, and useful in non-native
	configurations.  Moved to...
	* i386-linux-tdep.c: ... Here, a new file.
	* Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
	(i386-linux-tdep.o): New rule.
	(i386-linux-nat.o): We no longer depend on frame.h.
	* config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.

2000-03-04  Eli Zaretskii  <[email protected]>

	* event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
	Print an error at compile time if we are to use select, but FD_SET
	is not available.
	(SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
	if HAVE_POLL is not defined and NO_FD_SET *is* defined.
	(create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
	(delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
	(gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
	instead of using memcpy and memset.  Use FD_ISSET.

	* config/i386/xm-go32.h (fd_mask): Remove typedef.

Mon Mar 20 19:58:45 2000  Andrew Cagney  <[email protected]>

	* command.c (_initialize_command): Document requirements for ``!''
 	command.

Mon Mar 20 18:12:46 2000  Andrew Cagney  <[email protected]>

	From Fri 10 Mar 2000 Robert
 	<[email protected]>:
	* sh-tdep.c (sh_processor_type_table): Add entry for sh2.

Mon Mar 20 17:33:32 2000  Andrew Cagney  <[email protected]>

	From Thu Mar 16 16:49:27 EST 2000 John David Anglin
 	<[email protected]>:
	* configure.in (CONFIG_INITS): Don't include hpux-thread.c. Stops
 	_initialize_hpux_thread being called twice.
	* configure: Regenerated.

2000-03-19  Eli Zaretskii  <[email protected]>

	* event-top.c (_initialize_event_loop): If instream is not
	connected to a terminal device, turn editing off.

2000-03-19  Eli Zaretskii  <[email protected]>

	Support for building GDB with DJGPP, and running the test suite on
	it:
	* config/djgpp/djconfig.sh: New file.
	* config/djgpp/config.sed: New file.
	* config/djgpp/README: New file.
	* config/djgpp/fnchange.lst: New file.
	* config/djgpp/djcheck.sh: New file.

2000-03-19  Eli Zaretskii  <[email protected]>

	* ser-go32.c (ports): Make the initializers complete, to pacify
	GCC 2.9X.

2000-03-17  Jim Blandy  <[email protected]>

	* i386v-nat.c (i386_insert_nonaligned_watchpoint): Use a
	two-dimensional array, instead of faking it with explicit index
	arithmetic.

	* linux-thread.c (linuxthreads_attach, linuxthreads_detach,
	linuxthreads_create_inferior): Fix typo in variable name: it's
	linuxthreads_exit_status, not linux_exit_status.

	* gdb_wait.h (WSETSTOP): Pass the appropriate number of arguments
	to W_STOPCODE.

	* solib.c (solib_add): Delete debugging code.

2000-03-17  Mark Kettenis  <[email protected]>

	* gdb_wait.h: add definitions of WSETSTOP and WSETEXIT for Linux.
	* linux-thread.c: Use WSETSTOP instead of W_STOPCODE.

Fri Mar 17 11:06:59 2000  Philippe De Muyter  <[email protected]>

	* language.c (set_lang_str): Do not call `free' for a null pointer.
        (set_type_str, set_range_str): Ditto.

2000-03-16  Jim Blandy  <[email protected]>

        * i386-linux-nat.c (i386_linux_saved_pc_after_call): Lost in the
	merge; reinstated.

	* solib.c (current_sos): Be more careful about freeing the new
	so_list node if an error occurs.

	* i386-tdep.c (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
	LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
	LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
	LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
	LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
	LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
	linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
	i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
	i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
	i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
	i386_linux_sigtramp_saved_sp):	Deleted.  These all implement
	Linux-specific signal trampoline detection, and should be moved
	to...
	* i386-linux-nat.c: ... here.
	* config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
	this any more, since we're not enabling OS-specific code in a
	OS-independent file.
	
2000-03-16  Eli Zaretskii  <[email protected]>

	* Makefile.in (go32-nat.o): Add prerequisites.
	(ALLDEPFILES): Add go32-nat.c.

2000-03-15  Michael Snyder  <[email protected]>

	From "Peter.Schauer" <[email protected]>
	* symfile.c (reread_symbols):  Clear msymbol hash table.

2000-03-15  Jim Blandy  <[email protected]>

	Deal with the inferior unloading shared objects.
	* solib.c (current_sos): New function, replacing find_solib.
	(find_solib): Deleted.
	(free_so): New function.
	(clear_solib): Call free_so, instead of writing it out.
	(solib_add): Rewritten: compare the inferior's current list of
	shared objects with GDB's list, and do the required loads and
	unloads.
	(info_sharedlibrary_command, solib_address): Don't use find_solib
	to walk the list of shared libraries: call solib_add, and then
	walk the list at so_list_head normally.
	* objfiles.c (free_objfile): Don't call CLEAR_SOLIB, and don't
	detach the core target.  These tasks are taken care of elsewhere.
	* target.c (remove_target_sections): New function.
	* target.h (remove_target_sections): New declaration.

	* solib.c (symbol_add_stub): Check whether we've already created
	an objfile for this shared object first, before doing all that
	work to compute section addresses, etc.

	* objfiles.c (unlink_objfile): Report an internal error if objfile
	doesn't occur in the object_files list.

	* solib.c (special_symbol_handling): Delete argument; it's not
	used.
	
	Changes from Peter Schauer <[email protected]>:

	* solib.c (SOLIB_EXTRACT_ADDRESS):  New macro to extract addresses
	from solib structures. Use it throughout solib.c, get rid of all
	CORE_ADDR casts.
	(struct so_list):  Change type of lmaddr to CORE_ADDR.
	(first_link_map_member):  Change return value type to CORE_ADDR,
	update callers.
	(solib_add_common_symbols):  Change parameter type to CORE_ADDR,
	update callers.
	(open_symbol_file_object, find_solib):  Change type of lm variable
	to CORE_ADDR.

2000-03-15  Eli Zaretskii  <[email protected]>

	* ser-go32.c (dos_noop, dos_raw, dos_noflush_set_tty_state)
	(dos_print_tty_state, dos_info, _initialize_ser_dos): Convert
	to ISO C.  Use ATTRIBUTE_UNUSED to avoid compiler warnings.
	(dos_info): Avoid compiler warning when printing a ptrdiff_t.

	* ser-go32.c (dos_get_tty_state): Fail if the (fake) handle was
	not opened by dos_open, but let the 3 standard handles go through
	unharmed.

2000-03-14  Elena Zannoni  <[email protected]>

	* eval.c (evaluate_subexp_with_coercion): Add call to
 	check_typedef, to handle typedeffed vars correctly.

Mon Mar 13 21:21:41 2000  Andrew Cagney  <[email protected]>

	* defs.h (STREQ, STRCMP, STREQN): Document that these macros are
 	somewhat redundant.
	(QUIT): Note that this can probably be replaced by a function.

2000-03-13  James Ingham  <[email protected]>

	Add support for a variable object that tries to evaluate itself in 
	the currently selected frame, rather than in a fixed frame.
	
	* wrapper.c,h (gdb_parse_exp_1): Added a wrapper for
 	gdb_parse_exp_1.
	* varobj.h: Added USE_CURRENT_FRAME to varobj_type & changed def'n 
	of varobj_create.
	* varobj.c (varobj_list): Return type indicates whether the
	variable's type has changed (for current frame variables).
	(varobj_update): Handle the case where the variable's type has
	changed.
	(delete_variable_1): Allow for deletion of variables that have not 
	been installed yet.
	(new_root_variable): Initialize use_selected_frame variable.
	(value_of_root): This is where most of the work to handle "current 
	frame" variables was added.  Most of the complexity involves
	handling the case where the type of the variable has changed.
	(varobj_create): Add a "type" argument, to tell if the
	variable is one of these "current frame" variables.  Also protect
	call to parse_exp_1 from long jumping.
	
2000-03-13  Eli Zaretskii  <[email protected]>

	* go32-nat.c (struct env387): Remove declaration.
	(print_387_status, i386_go32_float_info): Remove redundant
	functions.
	(regno_mapping, sig_map, excepn_map): Add braces around inner
	initializers.
	(many functions): Use ATTRIBUTE_UNUSED to shut up the compiler;
	fix code which mixed signed with unsigned.
	(go32_resume): Use TARGET_SIGNAL_LAST instead of -1.
	(go32_wait): Initialize INT3_addr.
	(go32_fetch_registers): Extend all FP registers that are shorter
	than 4 bytes to 32 bits.  Support 32 standard FP registers defined
	on config/i386/tm-i386.h.
	(store_register): Support 32 FP registers.
	(go32_create_inferior): Don't crash if handed a NULL pointer
	instead of exec file name.
	(ignore): Remove unused function.
	(go32_insert_hw_breakpoint): Remove unused variables.
	(init_go32_ops): Set value of processing_gcc_compilation to 2.

Mon Mar 13 18:54:42 2000  Andrew Cagney  <[email protected]>

	From 2000-03-10 Daniel Berlin <[email protected]> Fix C++
 	overloading, add support for seeing through references:
	* valops.c (find_overload_match): Handle STABS overloading for
	C++.
	(find_overload_match): Look in right place for function arguments
	in the debug info.
	(find_overload_match): Rather than giving up when we have >1
	perfect match, just choose one, especially since the
	recommendation GDB gives ("disambiguate it by specifying function
	signature"), is basically impossible.
	(check_field_in): STREQ->strcmp_iw
	(search_struct_field): STREQ->strcmp_iw
	(find_method_list): STREQ->strcmp_iw
	* gdbtypes.c (rank_one_type): Add ability to see through
	references.
	(rank_one_type): strcmp->strcmp_iw, because the whitespace could
	be different.
	(rank_function): Rank function properly (was doing it wrong
	before, comparing the wrong parts of the arrays)
	(rank_one_type): Change #if 0 to #ifdef DEBUG_OLOAD.
	* gdbtypes.h: Add REFERENCE_CONVERSION_BADNESS for "badness"
	associated with converting a non-reference to a reference.
    * eval.c (evaluate_subexp_standard): for OP_VAR_VALUE, always
    return full value object; for STRUCTOP_PTR, use pointer to
    rtti type to get member / method if objectprint is set and
    target type of pointer is class.

	* gdbtypes.c (rank_one_type): Add comment on how to eliminate the
 	#ifdef DEBUG_OLOAD.
	
2000-03-11  Mark Kettenis  <[email protected]>

	* gnu-nat.c: Fix the formatting where indent misinterpreted `&' as
	a binary operator.
	(gnu_attach): Change error message for missing
	argument to be identical to the corresponding message in
	`inftarg.c'.  This makes the testsuite happy.

2000-03-11  Mark Kettenis  <[email protected]>

	* i386gnu-nat.c (gnu_store_registers): Make sure the T bit in the
	%eflags isn't modified.  This fixes a bug where every call to a
	function in the program beyond the first call would fail.

Fri Mar 10 11:44:55 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Devolve responsibility for domain maintenance.

2000-03-06  Elena Zannoni  <[email protected]>

	* minsyms.c (prim_record_minimal_symbol_and_info): Add comment.

2000-02-25  Scott Bambrough <[email protected]>

	* gdb.base/long_long.exp: Correct test suite failure when printing
	a long long value as a double on ARM platforms.

Thu Mar  9 14:21:07 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS (Core): Anthony Green is the Java - including
 	testsuite - maintainer.  Reformat testsuite and language support
 	sections

2000-03-08  Mark Kettenis  <[email protected]>

	* i386-tdep.c (i386_linux_saved_pc_after_call): New function.
	* config/i386/tm-linux.h (SAVED_PC_AFTER_CALL): Define to call
	i386_linux_saved_pc_after_call.

2000-03-06  Jim Blandy  <[email protected]>

	From Tom Tromey <[email protected]> and Keith Seitz <?>:

	* minsyms.c: #include <ctype.h>, for msymbol_hash_iw.
	(compact_minimal_symbols): Added `objfile' argument.
	Put symbols in the objfile's hash table.
	(install_minimal_symbols): Put symbols in the objfile's demangled
	hash table.
	(lookup_minimal_symbol): Use hash table to find symbol in
	objfile.
	(msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): New
	functions.
	(prim_record_minimal_symbol_and_info): Initialize the
	hash link fields of the new minimal symbol.
	* symtab.h (struct minimal_symbol): New fields `hash_next',
	`demangled_hash_next'.
	(msymbol_hash_iw, msymbol_hash, add_minsym_to_hash_table): Declare.
	* objfiles.h (MINIMAL_SYMBOL_HASH_SIZE): New define.
	(struct objfile): New fields `msymbol_hash',
	`msymbol_demangled_hash'.

2000-03-06  Jim Blandy  <[email protected]>

	* solib.c (first_link_map_member): Doc fix.

2000-03-06  Elena Zannoni  <[email protected]>

        From  Eli Zaretskii  <[email protected]>:

	* event-loop.c (poll_timers): Don't compare delta.tv_sec with
	zero, since time_t might be unsigned.

2000-03-06  Mark Kettenis  <[email protected]>

	* i386-linux-nat.c (supply_fpregset): Mask off the reserved bits
	in *FPREGSETP.
	(convert_to_fpregset): Don't touch the reserved bits in *FPREGSETP.

2000-03-05  Mark Kettenis  <[email protected]>

	Allow GDB to run on Linux 2.0 again.
	* config.in: Add HAVE_PTRACE_GETREGS.
	* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
	* configure: Regenerated.
	* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
	CANNOT_STORE_REGISTER): New defines.
	* i386-linux-nat.c (have_ptrace_getregs): New variable.
	(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
	old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
	store_register, old_store_inferior_registers): Copied over from
	`inptrace.c' as a temporary measure.
	(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
	Conditionalize on HAVE_PTRACE_GETREGS.  Define stubs if
	HAVE_PTRACE_GETREGS isn't defined.
	(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
	with EIO.
	(fetch_inferior_registers, store_inferior_registers): Fall back on
	the method use in `infptrace.c' (by calling
	old_fetch_inferior_registers and old_store_inferior_registers) if
	`have_ptrace_getregs' isn't set.

2000-03-05  Mark Kettenis  <[email protected]>

	* i386-linux-nat.c: Use elf_gregset_t and elf_fpregset_t instead
	of gregset_t and fpregset_t.  Those are the only names that are
	guaranteed to specify the right types for all supported Linux
	systems out there.
	Various doc fixes and gratitious local variable renames, all in an
	attempt to stress similarities between the code and unify the
	terminology used.  Use ISO-C all over.
	(regmap): Remove trailing comma.
	(FPREG_ADDR): Renamed from FPREGSET_T_FPREG_ADDR.
	(convert_to_gregset): Make static.  Remove GDB_REGS argument.  It
	is unnecessary and wasn't used anyway.  All callers changed.
	(convert_to_fpregset, convert_to_xfpregset): Likewise.
	(fetch_regs, store_regs): Remove unused variable `regno'.
	(fill_fpregs): If REGNO is not -1, only update the specified
	register.
	(fetch_core_registers): Renamed from
	i386_linux_fetch_core_registers.  There is no need for a unique
	name since the function is static anyway.
	(linux_elf_core_fns): Renamed from i386_linux_nat_core_functions
	since it is more descriptive.

Sun Mar  5 19:40:27 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS (readline/): Expand to include host maintainers.

2000-03-04  Mark Kettenis  <[email protected]>

	Fix support for Linux/i386 signal trampolines.  The old approach
	didn't work for Linux 2.2 and beyond, and didn't work with recent
	versions of the GNU C library.
	* i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
	LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
	(linux_rt_sigtramp_code): New variable.
	(LINUX_RT_SIGTRAMP_LEN): New define.
	(i386_linux_rt_sigtramp_start): New function.  Detect start of
	signal trampolines for RT signals.
	(i386_linux_sigtramp): Removed.
	(i386_linux_in_sigtramp): New function.
	(i386_linux_sigcontext_addr): New function.  Recognize the names
	of the signal tranmpolines used by recent versions of the GNU C
	library, and add support for RT signals.
        (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):  New
	defines.  Moved here from config/i386/tm-linux.h.
	(i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
	Reimplement in terms of i386_linux_sigcontext_addr.
	* config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
        (LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
        Moved to i386-tdep.c.
	(IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.

Sat Mar  4 19:38:11 2000  Andrew Cagney  <[email protected]>

	By: Sat Mar 4 04:08:58 2000 Alexandre Oliva <[email protected]>
	* Makefile.in (all-gdbtk): Fix $srcdir to ${srcdir}.

Sat Mar  4 17:23:06 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Frank Ch. Eigler and Andrew Cagney co-ordinate the
 	sim directory.

Sat Mar  4 16:19:31 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Michael Snyder and Peter Schauer to list of
 	``Blanket Write Privs'' maintainers.

Sat Mar  4 15:58:40 2000  Andrew Cagney  <[email protected]>

	From Sun 20 Feb 2000 Robert Lipe <[email protected]>:
	* language.c (longest_local_hex_string_custom): Don't compile
 	'long long' section if host doesn't have 'long long'.

Sat Mar  4 15:45:38 2000  Andrew Cagney  <[email protected]>

	* language.c (longest_raw_hex_string): Comment out.  Appears
 	unused.

Sat Mar  4 13:02:09 2000  Andrew Cagney  <[email protected]>

	* utils.c (mcalloc), defs.h (mcalloc): Keep consistent with
 	"mmalloc.h" which means using PTRs.
	(init_malloc, msavestring, mstrsave): Convert to PTR free ISO-C.

Sat Mar  4 11:49:21 2000  Andrew Cagney  <[email protected]>

	* defs.h (store_address, store_unsigned_integer, store_address):
 	Replace PTR with void* in delcaration.
	* findvar.c (extract_signed_integer, extract_unsigned_integer,
 	extract_long_unsigned_integer, extract_address,
 	store_signed_integer, store_unsigned_integer, store_address):
 	Convert definition to ISO-C.  Replace PTR with void*.

Sat Mar  4 10:57:25 2000  Andrew Cagney  <[email protected]>

	* defs.h (make_cleanup_func): Document as deprecated.
	(make_cleanup_ftype): New typedef.  Make signature consistent with
 	other function typedefs.  Document as not be used out side of
 	make_cleanup code. Use in make_cleanup declarations.
	(null_cleanup): Replace PTR with void*.
	
	* utils.c (make_cleanup, make_final_cleanup, make_run_cleanup,
 	make_exec_cleanup, make_exec_error_cleanup, make_my_cleanup,
 	null_cleanup): Change K&R definition to ISO-C using void* and
 	make_cleanup_fytpe.
	(discard_my_cleanups): Don't cast argument to free.

2000-03-03  Elena Zannoni  <[email protected]>

	* defs.h (struct continuation_arg): Change type of field 'data'
 	from PTR to void *.

	* event-loop.h: Eliminate uses of PTR, use 'void *' instead.

	* event-top.c: Ditto.

Fri Mar  3 15:39:34 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (CONFIG_CLEAN, CONFIG_ALL, LN_S): Defined by
 	configure.
	(SUBDIR_MI_CLEAN, SUBDIR_GDBTK_CLEAN, SUBDIR_MI_ALL,
 	SUBDIR_GDBTK_ALL): Define.
	(all-gdbtk, clean-gdbtk): New targets.
	(all): Add CONFIG_ALL as dependency.
	(clean): Add CONFIG_CLEAN as dependency.
	
	* configure.in (CONFIG_ALL, CONFIG_CLEAN): Define.
	(LN_S): Define.  Delete GDBtk's link code.

Fri Mar  3 13:12:34 2000  Andrew Cagney  <[email protected]>

	* configure.in (ENABLE_GDBTK): Delete variable.
	(enable-gdbtk): Only enable gdbtk when there is a GDBTK directory.
	* Makefile.in: Update.
	* configure: Regenerate

2000-03-02  Elena Zannoni  <[email protected]>

	* config/alpha/alpha-linux.mh: Remove core-regset.o fron the
 	NATDEPFILES list.

2000-03-02  Mark Kettenis  <[email protected]>

	* config/i386/tm-i386aix.h (NUM_FPREGS, NUM_REGS, REGISTER_BYTES):
	Override definitions to include the normal FPU registers.
	(REGISTER_CONVERTIBLE, REGISTER_CONVERT_TO_VIRTUAL,
	REGISTER_CONVERT_TO_RAW): Removed.  The default definitions are
	fine for AIX/i386.
	(i387_to_double, double_to_i387): Remove prototypes.

2000-03-02  Kevin Buettner  <[email protected]>

	* findvar.c (extract_floating, store_floating): Use target
	floating point type sizes rather host sizes to determine
	which conversion needs to be done.

2000-03-02  Nick Duffek  <[email protected]>

	* uw-thread.c: Apply GNU conventions to comment formatting.
	(deactivate_uw_thread): Call remove_thread_event_breakpoints().
	(uw_thread_mourn_inferior): Move remove_thread_event_breakpoints()
	call to deactivate_uw_thread().

Thu Mar  2 09:04:46 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Daniel Berlin is C++ maintainer.		

Thu Mar  2 08:55:35 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Mark Kettenis is the x86 architcture maintainer and
 	a joint GNU/Linux/x86 maintainer.  Nick Duffeck and Robert Lipe
 	share SCO/Unixware.  Nick Duffek and Peter Schauer share
 	Solaris/x86.

Wed Mar  1 22:12:35 2000  Andrew Cagney  <[email protected]>
	
	From Wed 23 Feb 2000 Fernando Nasser <[email protected]>:
	* remote-sim.c (gdbsim_close): Call generic_mourn_inferior.
	* remote-rdi.c (arm_rdi_close): Ditto. 

Wed Mar  1 19:31:32 2000  Andrew Cagney  <[email protected]>

	* CONTRIBUTE (configure.in): Note that patches to configure are
 	not needed.

2000-03-01  Mark Kettenis  <[email protected]>

	* MAINTAINERS: Correct my own mail address.

Wed Mar  1 11:26:07 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Document people with paperwork pending.

Wed Mar  1 00:49:06 2000  Andrew Cagney  <[email protected]>

	From 2000-02-28 Peter Schauer <[email protected]>:
	Make NEW_PROC_ABI interface functional on Solaris x86.
	* sol-thread.c (ps_lgetLDT): Rewrite to use new
 	procfs_find_LDT_entry function from procfs.c, mostly copied from
 	lin-thread.c.
	* inferior.h, procfs.c (procfs_get_pid_fd): Removed, no longer
 	needed.

Wed Mar  1 00:34:55 2000  Andrew Cagney  <[email protected]>

	From 2000-02-26 Peter Schauer <[email protected]>:
	* config/i386/tm-i386sol2.h (MERGEPID): Define.

Wed Mar  1 00:06:19 2000  Andrew Cagney  <[email protected]>

	From 1999-08-13 J.T. Conklin <[email protected]>:
        * config/i386/tm-i386.h (FRAME_INIT_SAVED_REGS): Replace
        FRAME_FIND_SAVED_REGS.
        (i386_frame_init_saved_regs): Replace i386_frame_find_saved_regs.
        * i386-tdep.c (i386_frame_init_saved_regs, i386_pop_frame):
        Update.

Tue Feb 29 23:56:41 2000  Andrew Cagney  <[email protected]>

	From 2000-02-23 Peter Schauer <[email protected]>:
	* objfiles.c (open_mapped_file):  Fix obsolete references to `mapped'
	parameter.

Tue Feb 29 18:47:58 2000  Andrew Cagney  <[email protected]>

	From 2000-02-23 Eli Zaretskii <[email protected]>:
	* config/i386/nm-go32.h (FLOAT_INFO): Remove macro definition.
	(top level): Add prototypes for go32_* functions.
	* config/i386/tm-go32.h (I386_DJGPP_TARGET): Define.
	(FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
	Override definitions from tm-i386.h.
	(REGISTER_VIRTUAL_TYPE): Remove macro definition.
	* i386-tdep.c (i386_extract_return_value)
	[I386_AIX_TARGET || I386_GNULINUX_TARGET]: Add I386_DJGPP_TARGET
	to the list of targets which return FP values in FP registers.

	* i386-tdep.c (i386_extract_return_value): Add FIXME recommending
 	that this function be re-implemented using multi-arch.

Tue Feb 29 18:40:08 2000  Andrew Cagney  <[email protected]>

	From 2000-02-23 Eli Zaretskii <[email protected]>:
	* utils.c [__GO32__]: Include pc.h, for prototypes of ScreenCols
	and ScreenRows.
	* ser-go32.c: Include string.h, for prototype of strncasecmp.
	(dpmi_regs, dpmi_sregs): Remove unused variables.
	(dos_flush_input): Return a value, to prevent compiler warning.
	* expprint.c (dump_prefix_expression): Use %ld in format and cast
	sizeof(union exp_element) to long, to prevent GCC from complaining
	about format/argument mismatch.
	(dump_postfix_expression): Likewise.

Tue Feb 29 18:09:46 2000  Andrew Cagney  <[email protected]>

	* arm-tdep.c: Include <ctype.h>.

Tue Feb 29 17:33:49 2000  Andrew Cagney  <[email protected]>

	From Wed, 23 Feb 2000 Fernando Nasser <[email protected]>:
	* stack.c (backtrace_command_1), infrun.c (normal_stop): Check
 	that the target's stack was valid.

Tue Feb 29 15:14:56 2000  Andrew Cagney  <[email protected]>

	From 2000-02-22 Stephane Carrez <[email protected]>:
        * dwarf2read.c (read_address): Read 16-bits addresses.

2000-02-28  Scott Bambrough <[email protected]>

	* arm-linux-nat.c (fetch_nw_fpe_*):
 	Renamed to fetch_nwfpe_* to use the same naming convention
	as in the Linux kernel.  Modified prototype to get rid of
	unused parameters.
	(store_nw_fpe_*): Renamed to store_nwfpe_* to use the same
	naming convention as in the Linux kernel.  Fixed calls to 
	fetch_nwfpe_*.
	(store_fpregs): Fixed calls to store_nwfpe_*.  Removed
	unused variable. 

Mon Feb 28 18:24:32 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Transfer d30v maintainership to David Taylor.

2000-02-28  Christopher Faylor  <[email protected]>

	* win32-nat.c: Remove unneeded header.
	* wince.c: Ditto.

Mon Feb 28 13:34:54 2000  Andrew Cagney  <[email protected]>

	* wince.c: Include "gdb_wait.h" and not "wait.h".

Mon Feb 28 10:58:45 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Mention mmalloc.  Expand Host/Native and
 	Target/Architecture maintainers descriptions.

2000-02-26  Mark Kettenis  <[email protected]>

	* gnu-nat.c: Include "gdbthread.h".  Include <hurd.h>.
	Reorder headers a bit.  Overall cleanup and minor reformatting.
	(MIG_SERVER_DIED): Remove define.
	(proc_update_sc): Add braces to silence compiler warning.
	(proc_steal_exc_port): Initialize err to zero.
	(make_proc): Add braces to silence compiler warning.
	(inf_validate_task_sc): Add cast to silence compiler warning.
	(inf_set_traced): Reorganize a bit to silence compiler warning.
	(inf_validate_procs): Use mach_msg_type_number_t for all thread
	numbers and add braces to silence compiler warning.
	(gnu_wait): Add prototypes for server functions and add braces to
	silence compiler warnings.
	(S_exception_raise_request): Pass subcode to inf_debug call.
	(gnu_write_inferior): Remove unused variable `protection_changed'.
	(gnu_xfer_memory): Remove unused variable `result'.
	(set_sig_thread_cmd): Remove unused varible `tid'.
	(set_signals_cmd): Remve unused variable `trace'.
	(add_task_commands): Provide complete prototype.  Reformat help
	strings a bit to make sure the first line is a full sentence.
	Call info_port_rights_cmd instead of info_send_rights_cmd for the
	"info port-rights" command.
	(add_thread_commands): Provide complete prototype.  Make static.
	Reformat help strings a bit to make sure the first line is a full
	sentence.
	(_initialize_gnu_nat): Provide complete prototype.

2000-02-26  Mark Kettenis  <[email protected]>

	Make cross-compilation for the Hurd more friendly.
	From Jeff Bailey <[email protected]>:
	* configure.in: Use AC_CHECK_TOOL to find MiG.
	* Makefile.in (MIG): New variable.
	* config/i386/i386gnu.mh (MIG): Remove.
	* configure: Regenerated.

2000-02-26  Kevin Buettner  <[email protected]>

	* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
	comment explaining motivation behind this function and why
	the generic facilities won't work for this platform.
	* rs6000-tdep.c (skip_prologue): Always test to make sure
	that an instruction is read successfully from the target's
	memory.  Introduce notion of instructions which may appear in
	the prologue, but may not end the prologue.  Added explicit
	check for nop instruction.  Use memset() to zero the frame
	data instead of assignment from a statically allocated,
	uninitialized structure.

Sat Feb 26 17:15:16 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Chris Faylor is responsible for all MS Windows
 	systems.  Note that Jim Blandy as maintainer for ``tracing
 	bytecode stuff''

2000-02-25  Fernando Nasser  <[email protected]>

	From: Thomas Zenker <[email protected]>
	* rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
	NetBSD...) sys_errlist should not be declared in hsys.c.
	NEED_SYSERRLIST is set already by configure, so we can use it.
	* rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
	posix compliant and we should not work with the old compatibility
	stuff.  Because of that I undef BSD in case of FBSD etc and include
	sys/ioctl to get the flags.
	* rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
	for exclusive use.

2000-02-24  Kevin Buettner  <[email protected]>

	* ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
	of return structure in r3 if necessary.
	(ppc_linux_memory_remove_breakpoints): New function.
	* rs6000-tdep.c (skip_prologue): Make sure that the cases
	for storing either cr or lr to the stack only handle those
	cases.  (I.e, don't let these cases match 0x00000000 which is
	found found in the shared library trampoline prior to the
	loading of the shared library.)
	* config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
	Declare.
	(MEMORY_REMOVE_BREAKPOINT): Define.

Wed Feb 23 23:27:48 2000  Andrew Cagney  <[email protected]>

	* hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.

Thu Feb 24 18:42:15 2000  Andrew Cagney  <[email protected]>

	* configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
 	$(SUBDIR_*_INSTALL) when so configured.
	* configure: Regenerate.
	
	* Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
 	configure.
	(install-only): Add dependency on $(CONFIG_INSTALL).  Delete code
 	installing GDBtk.
	(uninstall): Add dependency on $(CONFIG_UNINSTALL).
	(SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
 	SUBDIR_GDBTK_INSTALL): Define.
	(install-gdbtk): New target.

Thu Feb 24 18:19:52 2000  Andrew Cagney  <[email protected]>

	* configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
	* configure: Regenerate.
	
2000-02-24  Christopher Faylor  <[email protected]>

	* configure.tgt: Add arm, mips, sh wince targets.
	* config/arm/tm-wince.h: New file.
	* config/arm/wince.mt: New file.
	* config/sh/tm-wince.h: New file.
	* config/sh/wince.mt: New file.
	* config/mips/tm-wince.h: New file.
	* config/mips/wince.mt: New file.
	* wince.c: New file.
	* wince-stub.c: New file.
	* wince-stub.h: New file.
	* sh-tdep.c: Use correct register names for Windows CE.

Wed Feb 23 19:01:45 EST 2000  Nicholas Duffek <[email protected]>

	* top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
	(error_return, quit_return): Merge into catch_return pointer.
	(return_to_top_level): Update comment.  Longjmp to *catch_errors,
	and communicate reason to catch_errors via setjmp return value.
	(catch_errors): Always catch both quit and error, and if a catch
	wasn't requested by caller, throw it to the next catch_error.
	Replace dual longjmp buffer memcpy with single pointer change.
	Add FIXME for possibly adding new interface to tell caller what
	event was caught.  Add extensive comments.
	* defs.h (enum return_reason): Reserve 0 for use as initial
	setjmp() return value.
	(RETURN_MASK): New public macro to generate RETURN_MASK_* from
	enum return_reason.
	(RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.

2000-02-23  Fernando Nasser  <[email protected]>

	* infcmd.c (run_stack_dummy): Do not pop frame on random signal.
	* valops.c (_initialize_valops): Add command "set unwindonsignal".
	(hand_function_call): Test for unwind_on_signal and act accordingly.

Wed Feb 23 12:58:46 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
  	Match ../include/dis-asm.h change.
	* gdbarch.h: Regenerate.
	* corefile.c (dis_asm_read_memory): Update.

Mon Feb 21 13:57:27 2000  Andrew Cagney  <[email protected]>

	* configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
	(ENABLE_CFLAGS): Move initialization to start of file.
	(enable-gdbmi): Add new configure option --enable-gdbmi.  When
 	selected and an ${srcdir}/mi directory is present enable MI
 	interface.

	* configure: Regenerate.
	
	* Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
 	SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
	(CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
 	CONFIG_LDFLAGS): New macros.  Initialized by autoconf via
 	@CONFIG...@.
	(INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
 	INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.

	* mi: New directory. MI interface to GDB.

	* defs.h (interpreter_p): Declare when UI_OUT.
	* top.c (gdb_init): When interpreter_p, check that the interpreter
 	was recognized by one of the linked in interpreters.
	* main.c (interpreter_p): Define.
	(captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
	* event-top.c (display_gdb_prompt): When interpreter_p, assume
 	interpreter displays prompt.

	* breakpoint.c (print_it_typical, watchpoint_check,
 	print_one_breakpoint, mention): When MI include additional
	target status information.
	* infrun.c (print_stop_reason, normal_stop): Ditto.

2000-02-22  Jim Blandy  <[email protected]>

	* gdbarch.sh: Make the `default' field really default to zero, as
 	documented.

	Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
	* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
	more function-like.
	(default_coerce_float_to_double, standard_coerce_float_to_double):
	New functions.
	(value_arg_coerce): Adjust for new definition.
	* value.h (default_coerce_float_to_double,
	standard_coerce_float_to_double): New declarations for the above.
	* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
	* gdbarch.c, gdbarch.h: Regenerated.
	* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
 	tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
 	definitions.
	* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
	function here.
	(mips_gdbarch_init): Install that as our coerce_float_to_double
	function.

2000-02-22  Kevin Buettner  <[email protected]>

	* ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
	type.
	* ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
	forward declaration.

	* ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
	where the next frame is a signal handler caller.

	* config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
	undef.
	(tm-linux.h): Include.
	(tm-sysv4.h): Don't include (directly).  config/tm-linux.h will
	include this file for us.
	(REALTIME_LO, REALTIME_HI): Don't define.  These are defined by
	config/tm-linux.h for us.
	(SOFUN_ADDRESS_MAYBE_MISSING): Define.

2000-02-21  Kevin Buettner  <[email protected]>

	* Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
	(ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
	* configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
	and like targets.

	* ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
	config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
	* config/powerpc/xm-linux.h: Substantially revised for native
	port.
	* config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
	(NATDEPFILES): Update list to reflect the fact that we can
	now debug natively.

	* rs6000-tdep.c, config/rs6000/tm-rs6000.h
	(rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
	Renamed; The former names were lacking the rs6000_ prefix.
	* rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
	instead of rs6000_frame_chain.
	(rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
	of rs6000_frameless_function_invocation.

2000-02-21  Elena Zannoni  <[email protected]>

	From Philippe De Muyter  <[email protected]>

	* event-loop.c (handle_file_event): In case of poll, enable
 	printing of informational message if an error/exception is
 	detected on the file descriptor.

2000-02-21  Jim Kingdon  <[email protected]>

	* MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.

Mon Feb 21 12:50:57 2000  Andrew Cagney  <[email protected]>

	* buildsym.c: Include "language.h" and "expression.h" for
 	longest_local_hex_string_custom.

Mon Feb 21 11:17:18 2000  Andrew Cagney  <[email protected]>

	* gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
	* gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
 	Cagney <[email protected]>.

Mon Feb 21 11:03:01 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
 	nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
 	Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
 	to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
 	Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
 	Kingdon.
	* MAINTAINERS: Add Nick Clifton to write after approval list.
	
Mon Feb 21 10:30:39 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add note on multiple maintainers.

2000-02-19  Philippe De Muyter  <[email protected]>

        * cli-out.c (cli_table_header): Type of parameter `alignment' is
        `enum ui_align', not `int'.
        (cli_field_string, cli_field_skip): Likewise.

2000-02-18  Jim Blandy  <[email protected]>

	From Jimmy Guo <[email protected]>:
	* buildsym.h (add_free_pendings): Declare.
	* buildsym.c (add_free_pendings): New function.
	(make_blockvector): 32x64 fix using longest_local_hex_string().
	(start_subfile): initialize variable 'subfile'.

2000-02-18  Elena Zannoni  <[email protected]>

	* remote.c (remote_async_detach): Use target_mourn_inferior(), to
 	make sure that all is cleaned up after we disconnect from the
 	target.
	(remote_detach): Ditto.

2000-02-17  Fernando Nasser  <[email protected]>

	From Rodney Brown  <[email protected]>
	* ui-out.c (ui_out_set_flags): Fix typo, removing warning and
	potentially harming mistake.

2000-02-17  Fernando Nasser  <[email protected]>

	* arm-tdep.c: Use header file instead of extern declarations for
	the {get,set}_arm_regname* functions.

2000-02-16  Fernando Nasser  <[email protected]>

	* configure.in: Replaces obsolete gdbtk-variable.c with
	gdbtk-varobj.c.
	* configure: Regenerate.
	* Makefile.in: Remove obsolete/extraneous references to
	gdbtk-var* files.

2000-02-16  Mark Kettenis  <[email protected]>

	* target.c (do_target_signal_to_host): Do not use REALTIME_LO in
	the conversion of the signal number.  TARGET_SIGNAL_REALTIME_33 is
	33 by definition, whereas REALTIME_LO might be 32 on systems that
	have SIG32 such as Linux.  Make sure that the signal number
	returned is within the range specified by REALTIME_LO and
	REALTIME_HI.

2000-02-16  Mark Kettenis  <[email protected]>

	* configure: Regenerated.

2000-02-16  Fernando Nasser  <[email protected]>

	* arm-tdep.c (set_disassembly_flavor, arm_othernames,
	_initialize_arm_tdep): Allows the user to choose between any of
	the flavors available for the disassembly to be used in the "info
	reg" command and elsewhere in gdb.  It prevents having to maintain
	this information in two places by using the data kept in the
	opcodes directory.

2000-02-09  Mark Kettenis  <[email protected]>

	* configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
	prfpregset_t in <sys/procfs.h>.
	* config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
	HAVE_PRFPREGSET_T.
	* gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
	prgregset_t and prfpregset_t if they are not already present.

Wed Feb 16 19:00:02 2000  Andrew Cagney  <[email protected]>

	From 2000-01-26 Rodney Brown <[email protected]>:
        * procfs.c: Define MERGEPID if not defined. For osf4.0e.

2000-02-15  Jason Molenda  ([email protected])

	* Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
	'do-doc'.

2000-02-15  Kevin Buettner  <[email protected]>

	Changes for AIX 4.3:
	* rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
	to correct value for generic dummy frames.  When using
	generic dummy frames, don't attempt to write TOC value or
	function to call into the call dummy.
        (rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
	code to also handle the PowerOpen ABI.
	(ppc_push_return_address): Enable for all ports.
	* config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
	PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER, 
	CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
	CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
	provided by generic RS6000 definitions so that call dummies
	are implemented using generic dummy frames instead.

	* rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
	prior to changing the stack pointer via ptrace().  Also, ignore
	attempts to store to undefined registers that are less than
	NUM_REGS.

	* rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
	frame from 436 to 448 to account for alignment padding.
	(rs6000_push_arguments): Obtain actual register size instead
	of assuming the register is 4 bytes long.  [There's still
	more work to be done to totally remove the 4 byte assumption,
	however.]  Make sure the stack is 16 byte aligned as required
	by the PowerOpen ABI.  Also, make sure that small structures
	passed in registers are properly aligned within the register.

2000-02-15  Jesper Skov  <[email protected]>

	Patch applied by Kevin Buettner <[email protected]>
	
	* rs6000-tdep.c (skip_prologue): skip copying of argument
	registers to local variable registers.

2000-02-14  Jim Kingdon  <[email protected]>

	* elfread.c (elf_symtab_read): Revert changes by Amit S. Kale.  A
	sym->section->index number is not a SECT_OFF_* code.

Tue Feb 15 12:07:30 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS (write after approval): Add H.J. Lu.

2000-02-14  Nick Clifton  <[email protected]>

	* sh-tdep.c: Remove extraneous code.

2000-02-14  Amit S. Kale  <[email protected]>

	* elfread.c (elf_symtab_read): Move the use of sym to after where
	it is set.
	Checked in by Jim Kingdon  <[email protected]>

Mon Feb 14 15:39:01 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.

Mon Feb 14 15:20:26 2000  Andrew Cagney  <[email protected]>

	From 1999-11-24 Jason Merrill <[email protected]>:
	* dwarf2read.c: (die_is_declaration): New fn.
	(read_structure_scope): Use it.

	* dwarf2read.c: (die_is_declaration): Convert to ISO-C.

2000-02-10  J.T. Conklin  <[email protected]>

	* config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
	* configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
 	configdirs.
	* gdbserver/low-nbsd.c: New file.
	
	* gdbserver/Makefile.in: convert to autoconf.
	* gdbserver/configure.in: likewise.
	* gdbserver/configure: generate.

Sun Feb 13 11:21:00 2000  Andrew Cagney  <[email protected]>

	* CONTRIBUTE: New file.  How to contribute to GDB.

Sun Feb 13 10:34:48 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Add Eli Zaretskii to djgpp maintiners.  Add Kevin
 	Buettner to powerpc maintainers.  Make Kevin Buettner the
 	GNU/LINUX PPC native maintainer.  Add J.T. Conklin, Jim Kingdon
 	and Jason Molenda to write after aproval list.

Sun Feb 13 10:18:44 2000  Andrew Cagney  <[email protected]>

	* MAINTAINERS: Reformat.  Separate into check-in categories.

Sat Feb 12 01:08:21 EST 2000  Nicholas Duffek <[email protected]>

	* uw-thread.c: Remove __FUNCTION__ GNUism.

2000-01-17  Amit S. Kale  <[email protected]>

	* elfread.c (elf_symtab_read): Use offset for the section in which a
	symbol resides, instead of .text section for calculating address of a
	symbol.
	Checked in by Jim Kingdon  <[email protected]>

2000-02-10  Mark Kettenis  <[email protected]>

	* gnu-nat.c: Remove hackery to include <bits/waitflags.h>.  It is
	no longer necessary now we have gdb_wait.h.

2000-02-09  Mark Kettenis  <[email protected]>

	* gnu-nat.c (proc_string): Make global.
	(do_mach_notify_dead_name): Suppress dead name notifications if we
	know that the task is dead.

1999-12-13  Mark Kettenis  <[email protected]>

	* gnu-nat.c (inf_validate_task_sc): Get task info via proc server
	instead of directly from the kernel.  Add some hackery to make
	sure that the info isn't influenced by suspension of the task in
	the proc server itself.

2000-02-10  Jim Kingdon  <[email protected]>

	* defs.h (MERGEPID): Added.  Patch submitted by Andrew Hobson and
	approved by Michael Snyder.

2000-02-09  Mark Kettenis  <[email protected]>

        * linux-thread.c: Include defs.h before gdb_wait.h.

Wed Feb  9 18:59:16 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (wait_h): Delete macro.  Update all dependencies
 	specifying gdb_wait.h instead.

	* ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
 	remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
 	remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
 	convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
 	remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
 	remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
 	remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
 	ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
 	infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
 	fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
 	or <sys/wait.h>.
	* nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.

	* gdb_wait.h: New file.  Based on ../include/wait.h. Include
 	<sys/wait.h> or <wait.h> and then define any missing WIF macros.

Wed Feb  9 01:14:54 2000  Andrew Cagney  <[email protected]>

	* config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
	* config/d10v/tm-d10v.h (STACK_ALIGN): Define.
	(d10v_stack_align): Declare.
	* d10v-tdep.c (d10v_stack_align): Define.

1999-08-23  J.T. Conklin  <[email protected]>

        * top.c (remote_timeout): Change default to 2.  Add comment
        explaining history of changes to the default value.
        * remote.c (_initialize_remote): Remove code that adds set/
        show remotetimeout, as that's also done in top.c

1999-10-18  J.T. Conklin  <[email protected]>

        * m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
        Return E01 instead of P01 when 'P' command fails.

2000-02-05  J.T. Conklin  <[email protected]>

	* remote.c (putpkt_binary): Handle NAK from target stub.

2000-02-08  Elena Zannoni  <[email protected]>

	* configure.in: Remove the addition of sol-thread.c to the
	CONFIG_INITS list. This caused problems with init.c, because
	sol-thread.c would be grepped twice for _initialize_* functions.
	* configure: Ditto.
	* Makefile.in: Add FIXME for init.c.

2000-02-07  Jim Kingdon  <[email protected]>

	Clean up compiler warnings:
	* bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
	stack.c, valprint.c: Change variables to unsigned.
	* bcache.c: Rearrange to avoid warnings about variables not being set.
	* c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
	rather than declaring print_max and repeat_count_threashold
	ourselves (incorrectly).
	* valprint.h: Do declare repeat_count_threashold.
	* ch-exp.c: Use default case for internal error.
	* findvar.c: Don't omit argument type.
	* symtab.c: Remove unused variable.

2000-02-04  Jim Blandy  <[email protected]>

	* c-typeprint.c (remove_qualifiers): New function.
	(c_type_print_base): Use it to remove qualifiers from C++
	qualified names, not strrchr.

	* c-typeprint.c (c_type_print_base): Recognize type conversion
	operators by calling is_type_conversion_operator.
	(is_type_conversion_operator): New function.

2000-02-04  Nick Clifton  <[email protected]>

	* config/arm/tm-arm.h (LOWEST_PC): Define.

2000-02-04  Elena Zannoni  <[email protected]>

	* infrun.c (resume): Make just one call to target_resume(), instead
 	of four: set up correct parameters in all the cases ahead of time,
 	and do call at the end.

2000-02-04  Elena Zannoni  <[email protected]>

	* config/powerpc/tm-ppc-eabi.h: Define
 	SOFUN_ADDRESS_MAYBE_MISSING.

2000-02-04  Fernando Nasser  <[email protected]>

	* arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
	frames (revisited).

Fri Feb  4 22:42:36 2000  Andrew Cagney  <[email protected]>

	* Makefile.in (INIT_FILES): Append CONFIG_INITS
	* configure.in (CONFIG_INIT): Initialize.
	(links): Link srcdir/gdbtk/library to gdbtcl2.
	* gdbtcl2: Moved to gdbtk/library.
	ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
 	gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
 	gdbtk.h: Moved to gdbtk/generic.

2000-02-03  Elena Zannoni  <[email protected]>

	* printcmd.c (build_address_symbolic): New function. Returns all
 	the parts that are necessary to print an address in a symbolic
 	form.
	(print_address_symbolic): Split into a printing part and an
 	information building part, build_address_symbolic().

	* defs.h (build_address_symbolic): Export.

2000-02-03  Jim Blandy  <[email protected]>

	* dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
	opcode.

2000-02-02  Fernando Nasser  <[email protected]>

	* arm-tdep.c (arm_push_arguments): Fix passing of floating point
	arguments on dummy frames.

2000-02-02  Fernando Nasser  <[email protected]>

	* arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
	(arm_pop_frame): Account fr dummy frames (as opposed to real ones).

2000-02-01  Elena Zannoni  <[email protected]>

	* remote.c (getpkt_sane): New function. It is the old getpkt(),
 	which now returns a timeout indication.
	(getpkt): New function. Wrapper for getpkt_sane(), so that return
 	value can still be ignored.

Tue Feb  1 18:47:31 2000  Andrew Cagney  <[email protected]>

	* top.c (print_gdb_version): Print ``UI_OUT'' when configured with
 	UI_OUT.

Tue Feb  1 00:17:12 2000  Andrew Cagney  <[email protected]>

	* ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c.  Rename
 	``struct gdb_file'' to ``struct ui_file''.  Delete typedef
 	GDB_FILE.
	
	* Makefile.in: Update.

	* ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
 	c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
 	ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
 	cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
 	expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
 	frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
 	gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
 	jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
 	m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
 	printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
 	remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
 	ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
 	serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
 	target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
 	utils.c, v850ice.c, valprint.c, valprint.h, value.h,
 	config/pa/tm-hppa.h: Update.
	* cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.

2000-01-31  Jason Molenda  ([email protected])

	* config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
	config/i386/i386dgux.mh, config/i386/i386sol2.mh,
	config/i386/i386v4.mh, config/i386/i386v42mp.mh,
	config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
	config/m88k/delta88v4.mh, config/mips/irix4.mh,
	config/mips/irix5.mh, config/mips/mipsv4.mh,
	config/powerpc/solaris.mh (NATDEPFILES): Change references to
	proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
	proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.

Mon Jan 31 17:14:52 2000  Andrew Cagney  <[email protected]>

	* top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.

	* main.c (captured_main): Only use the legacy tui_file code when
 	linking in older code such as the TUI.

	* gdb-file.h, gdb-file.c: New files.
	* utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
 	null_file_isatty, null_file_rewind, null_file_put,
 	null_file_flush, null_file_write, null_file_fputs,
 	null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
 	gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
 	set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
 	set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
 	set_gdb_file_data, struct accumulated_gdb_file,
 	do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
 	mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
 	mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
 	stdio_file_delete, stdio_file_flush, stdio_file_write,
 	stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
 	Moved to gdb-file.h and gdb-file.c.
	* utils.c (enum streamtype, struct tui_stream, tui_file_new,
 	tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
 	tui_file_rewind, tui_file_put, tui_file_fputs,
 	tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
	fputs_unfiltered_hook):
 	Moved to tui/tui-file.c and tui/tui-file.h.
	
	* Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
	(tui-file.o, gdb-file.o): Add dependencies.
	(corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
	* main.c: #include tui/tui-file.h.

2000-01-28  Fred Fish  <[email protected]>

	* findvar.c (value_from_register): Special case handling of D10V
	pointer values fetched from registers.

2000-01-28  Fernando Nasser  <[email protected]>

	* arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
	support for new style thumb prologues.

2000-01-28  Nick Clifton  <[email protected]>

	* arm-tdep.c: Remove extraneous dash at start of strings
	introduced in previous delta.

2000-01-27  Nick Clifton  <[email protected]>

	* arm-tdep.c: Replace uses of arm_toggle_renames() with
	parse_arm_disassembler_option().

2000-01-27  Jim Blandy  <[email protected]>

	* symtab.c (decode_line_1): Don't let commas that are within
 	quotes or parenthesis terminate the line spec.  Don't use pp when
 	removing the final double quote of a double-quoted string.  Don't
 	forget to skip the opening double quote.  I have no clue whether
 	this change is correct; probably we've just moved this function
 	from one buggy place to another buggy place, and never came within
 	an outhouse whiff of correctness.
	(find_toplevel_char): New function.

2000-01-27  Fernando Nasser  <[email protected]>

	* arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
        passing the pointer to a thumb function as an argument.

2000-01-27  Fernando Nasser  <[email protected]>

	* remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
	are reinserted for another run.

2000-01-27  Fernando Nasser  <[email protected]>

	* cli-out.c (cli_filed_string): Test for NULL string.

2000-01-27  Fernando Nasser  <[email protected]>

	* infcmd.c (run_stack_dummy): Account for a random signal stopping
	the inferior as well as breakpoints being hit while performing an
	inferior function call.
	* valops.c (hand_function_call): Ditto.

2000-01-27  Elena Zannoni  <[email protected]>

	From  Mark Kettenis  <[email protected]>

	* config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
	i386_REGS_SEGS_STATE.
	(HAVE_I387_REGS): Define.
	(FLOAT_INFO): Remove.
	* i386gnu-nat.c: Almost completely rewritten to use new i386
	register layout and `float info' implementation.
	* gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
	Move prototypes from here.
	* gnu-nat.h: To here.

2000-01-24  Kevin Buettner  <[email protected]>

	* utils.c (get_field, put_field): Fix buffer underruns and
	overruns.  Also, handle case where total_len is not evenly
	divisible by 8.
	(getfield): Make sure zeroing of unwanted bits occurs even
	when bit field to extract does not straddle two or more
	bytes.

2000-01-23   Christopher Faylor  <[email protected]>

	* defs.h: Add gdb_thread_select declaration.

2000-01-23  Kevin Buettner  <[email protected]>

	* linux-thread.c (_initialize_linuxthreads): Make sure that
	linuxthreads_block_mask does not block SIGCHLD.

2000-01-20  Fernando Nasser  <[email protected]>

	* rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
	text so that new lines work properly.

2000-01-18  Elena Zannoni  <[email protected]>

	* proc-utils.h: New file. Export functions from proc-*.c.

	* proc_api.c: Rename to:
	* proc-api.c: New file. Add include of proc-utils.h.

	* proc_events.c: Rename to:
	* proc-events.c: New file.

	* proc_flags.c: Rename to:
	* proc-flags.c: New file.

	* proc_why.c: Rename to:
	* proc-why.c: New file. Add include of proc-utils.h.

	* procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
 	ctype.h, proc-utils.h.
	(find_procinfo_or_die): Add braces to avoid ambiguous else clause.
	(open_procinfo_files): Conditionalize local variable tmp, to avoid
 	compiler warnings.
	(proc_iterate_over_mappings): Conditionalize local vars mapfd and
 	pathname.
	(procfs_wait): Adjust format in some printf_filetered calls to
 	avoid compiler warnings.
	(make_signal_thread_runnable): Ifdef 0. The calls to this function
 	are also ifdef'd 0 .
	(procfs_resume): Add parentheses around '&&' operation.
	(procfs_set_exec_trap): Remove unused variable.
	(info_proc_cmd): Add braces to avoid ambiguous else clause.

	* Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
 	proc-why.o): Update dependencies.

	* config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
	proc-*.o.

2000-01-17  Jason Molenda  ([email protected])

	* configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
	Fix from Robert Lipe <[email protected]>.
	* configure: Regenerated.

2000-01-17  Elena Zannoni  <[email protected]>

	* stack.c (print_frame_info_base): Break up into the frame info
 	(location) printing part and the rest (source line printing).
	(print_frame): New function. Take care of printing the location
 	information.
	Update copyright.

	* infrun.c (normal_stop): Use enum values rather than integers for the
	source_flag to be passed to show_and_print_stack_frame().
        Update copyright.
	
	* frame.h (print_what): New enum for 'source' argument to
 	print_frame_info_base(). Use this instead of obscure numbers.
	Update copyright.
	
Sun Jan 16 17:58:00 2000  David Taylor  <[email protected]>

	* event-top.c (stdin_event_handler): call quit_command rather than
 	exit -- run cleanups, give target code a chance to say goodbye to
 	the target.  Fixes bug where the inferior processes were left
 	around on Solaris (and probably elsewhere) by the testsuite.

2000-01-14  Mark Salter  <[email protected]>

	* v850-tdep.c (v850_target_architecture_hook): Setup correct
 	machine id for disassembly.

2000-01-13  Jim Blandy  <[email protected]>

	* i386-linux-nat.c (fill_gregset): Pass the correct arguments to
	convert_to_regset, when regno indicates a specific register.

Thu Jan 13 23:34:17 EST 2000  Nicholas Duffek <[email protected]>

	* uw-thread.c: Document libthread.so debugging interface.  Minor
	comment and formatting tweaks.
	(DEBUG): #define as 0 instead of 1.
	(CALL_BASE): Include function name in error msg.
	(libthread_stub): Adjust inferior_pid after thread exit.
	(uw_thread_create_inferior): Deactivate uw_thread_ops before
	asking procfs_ops to create inferior.
	(libthread_init): Don't return nonlocally on error.

2000-01-12  Fernando Nasser  <[email protected]>

	* rdi-share/ardi.c (negotiate_params): Fix initialization of static
	variable.

2000-01-12  Fernando Nasser  <[email protected]>

	* remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
	both sides are on the same state.

2000-01-12  Fernando Nasser  <[email protected]>

	* rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
	115200 (minor syntax mistake).

2000-01-12  Jim Blandy  <[email protected]>

	* config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
	this here, to go along with the definitions of PIDGET and TIDGET.

2000-01-12  Elena Zannoni  <[email protected]>

	* thread.c (do_captured_thread_select): New function. Switch
 	current thread, safely from within catch_errors().
	(gdb_thread_select): New function. Switch threads safely.
	(thread_command): Use gdb_thread_select().
	Include ui-out.h.
	(do_captured_list_thread_ids): New function.
	(gdb_list_thread_ids): New function.

	* defs.h (gdb_thread_select, gdb_list_thread_ids): Export.

2000-01-11  Christopher Faylor <[email protected]>

	* configure.in: Avoid linking -limagehlp unless it's a native build.
	* configure: Regenerate.
	* thread.cc (add_thread): Clear private data pointer here or suffer
	strange behavior when it is checked for NULL later.

2000-01-09  Christopher Faylor  <[email protected]>

	* win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
	* configure.in: Add an additional library to cygwin link.
	* configure: Regenerate.

	Patch from Egor Duda <[email protected]>:
	* coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
	type.

2000-01-07  Michael Snyder  <[email protected]>

	* uw-thread.c: New file to support UnixWare user-mode threads:
	contributed by Nickolas Duffek  <[email protected]>.
	* target.h (struct target_ops): New vector, to_extra_thread_info,
	allows back-ends to give extra details in info thread display.
	(target_extra_thread_info): define new macro.
	(target_find_new_threads): simplify macro.  Cleanup comments.
	* target.c (to_extra_thread_info): default and inherit new vector.
	(cleanup_target): eliminate PARAMS, break up long lines,
	provide default definition for to_extra_thread_info, and
	to_find_new_threads.  Default to_thread_alive and to_query
	to return_zero, not target_ignore (they each return int not void).
	(debug_to_find_new_threads): new debug entry.
	(setup_target_debug): add debug_to_find_new_threads.
	* gdbthread.h: export struct thread_info, find_thread_pid, and
	iterate_over_threads.  Add comments.  Eliminate PARAMS.  Update
	copyright.  Add new private data pointer for use by target back-ends.
	* thread.c (struct thread_info): move definition to gdbthread.h.
	(find_thread_pid): new exported function for thread lookup.
	(iterate_over_threads): new exported function for applying
	arbitrary operations to threads.  Update copyright to 2000.
	(info_threads_command): use new target_extra_thread_info vector
	to display extra information about each thread (if implemented).
	* config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
	Add defines for PIDGET, etc.
	* config/i386/tm-i386sol2.h: ditto.
	* config/sparc/tm-sun4sol2.h: ditto.
	* config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
	* testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
	if -lpthread and -lpthreads fail.

	* procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
	(proc_flags): combine flags that UnixWare splits into two locations.
	(proc_modify_flag): add support for PR_KLC (kill on last close).
	(proc_[un]set_kill_on_last_close): new functions.
	
2000-01-07  Elena Zannoni  <[email protected]>

	* infrun.c (normal_stop): Print out thread id when we stop.

2000-01-06  Fernando Nasser  <[email protected]>

	* remote.c (remote_open_1): Fix message so it does not imply a
	specific syntax for serial ports, as it is OS dependent.
	(remote_async_open_1): Ibid.
	(init_remote_ops): Ibid.

2000-01-06  Fernando Nasser  <[email protected]>

	* rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
	"set remotebaud" command (if set) when no speed is specified on
	the "target rdi" command.

2000-01-06  Fernando Nasser  <[email protected]>

	* rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
	115200.
	(baud_options[]): Ibid.

2000-01-06  Fernando Nasser  <[email protected]>

	* rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
	used by each operating system.

2000-01-06  Elena Zannoni  <[email protected]>

	* breakpoint.c (until_break_command): Add an argument for the
 	continuation, the beginning of the cleanups set up by this
 	command.
	(until_break_command_continuation): Do cleanups until the one
 	passed in as argument instead of doing all of them.

	* infcmd.c (finish_command_continuation): Expect a new argument,
 	which indicates up to where to do cleanups. Update calls to
 	do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
	(finish_command): Add another argument for the continuation: the
	starting cleanup for this command.

2000-01-05  Fernando Nasser  <[email protected]>

	From Grant Edwards <[email protected]> (original patch from Thomas
	Zenker ):
	* rdi-share/ardi.c: Allow interruption of interruptible
	targets with a <CNTL-C>.

2000-01-04  Fernando Nasser  <[email protected]>

	* rdi-share/etherdrv.c (fetch_ports): Send extra words on request
	to control port to accommodate some versions of Angel.

2000-01-04  Fernando Nasser  <[email protected]>

	* rdi-share/devsw.c (dumpPacket): Fix source of channel information.
	Add interpretation for C Support Library packets.

2000-01-04  Fernando Nasser  <[email protected]>

	* rdi-share/devsw.c (DevSW_Close): Remove const from argument that
	is now being modified.
	* rdi-share/devsw.h: Adjust declaration of the above funtion.

For older changes see ChangeLog-99
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: