#endif
#include "init.h"
-
+#include "crypto/common.h"
#include "addrman.h"
#include "amount.h"
#include "checkpoints.h"
#include <boost/thread.hpp>
#include <openssl/crypto.h>
+#include "libsnark/common/profiling.hpp"
+
using namespace std;
+extern void ThreadSendAlert();
+
+ZCJoinSplit* pzcashParams = NULL;
+
#ifdef ENABLE_WALLET
CWallet* pwalletMain = NULL;
#endif
delete pwalletMain;
pwalletMain = NULL;
#endif
+ delete pzcashParams;
+ pzcashParams = NULL;
ECC_Stop();
LogPrintf("%s: done\n", __func__);
}
strUsage += HelpMessageOpt("-blocknotify=<cmd>", _("Execute command when the best block changes (%s in cmd is replaced by block hash)"));
strUsage += HelpMessageOpt("-checkblocks=<n>", strprintf(_("How many blocks to check at startup (default: %u, 0 = all)"), 288));
strUsage += HelpMessageOpt("-checklevel=<n>", strprintf(_("How thorough the block verification of -checkblocks is (0-4, default: %u)"), 3));
- strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "bitcoin.conf"));
+ strUsage += HelpMessageOpt("-conf=<file>", strprintf(_("Specify configuration file (default: %s)"), "zcash.conf"));
if (mode == HMM_BITCOIND)
{
#if !defined(WIN32)
strUsage += HelpMessageOpt("-par=<n>", strprintf(_("Set the number of script verification threads (%u to %d, 0 = auto, <0 = leave that many cores free, default: %d)"),
-(int)boost::thread::hardware_concurrency(), MAX_SCRIPTCHECK_THREADS, DEFAULT_SCRIPTCHECK_THREADS));
#ifndef WIN32
- strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "bitcoind.pid"));
+ strUsage += HelpMessageOpt("-pid=<file>", strprintf(_("Specify pid file (default: %s)"), "zcashd.pid"));
#endif
strUsage += HelpMessageOpt("-prune=<n>", strprintf(_("Reduce storage requirements by pruning (deleting) old blocks. This mode disables wallet support and is incompatible with -txindex. "
"Warning: Reverting this setting requires re-downloading the entire blockchain. "
strUsage += HelpMessageOpt("-onion=<ip:port>", strprintf(_("Use separate SOCKS5 proxy to reach peers via Tor hidden services (default: %s)"), "-proxy"));
strUsage += HelpMessageOpt("-onlynet=<net>", _("Only connect to nodes in network <net> (ipv4, ipv6 or onion)"));
strUsage += HelpMessageOpt("-permitbaremultisig", strprintf(_("Relay non-P2SH multisig (default: %u)"), 1));
- strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8333, 18333));
+ strUsage += HelpMessageOpt("-port=<port>", strprintf(_("Listen for connections on <port> (default: %u or testnet: %u)"), 8233, 18233));
strUsage += HelpMessageOpt("-proxy=<ip:port>", _("Connect through SOCKS5 proxy"));
strUsage += HelpMessageOpt("-proxyrandomize", strprintf(_("Randomize credentials for every proxy connection. This enables Tor stream isolation (default: %u)"), 1));
strUsage += HelpMessageOpt("-seednode=<ip>", _("Connect to a node to retrieve peer addresses, and disconnect"));
strUsage += HelpMessageOpt("-whitebind=<addr>", _("Bind to given address and whitelist peers connecting to it. Use [host]:port notation for IPv6"));
strUsage += HelpMessageOpt("-whitelist=<netmask>", _("Whitelist peers connecting from the given netmask or IP address. Can be specified multiple times.") +
" " + _("Whitelisted peers cannot be DoS banned and their transactions are always relayed, even if they are already in the mempool, useful e.g. for a gateway"));
-
#ifdef ENABLE_WALLET
strUsage += HelpMessageGroup(_("Wallet options:"));
if (showDebug)
{
strUsage += HelpMessageOpt("-limitfreerelay=<n>", strprintf("Continuously rate-limit free transactions to <n>*1000 bytes per minute (default: %u)", 15));
- strUsage += HelpMessageOpt("-relaypriority", strprintf("Require high priority for relaying free or low-fee transactions (default: %u)", 1));
+ strUsage += HelpMessageOpt("-relaypriority", strprintf("Require high priority for relaying free or low-fee transactions (default: %u)", 0));
strUsage += HelpMessageOpt("-maxsigcachesize=<n>", strprintf("Limit size of signature cache to <n> entries (default: %u)", 50000));
}
strUsage += HelpMessageOpt("-minrelaytxfee=<amt>", strprintf(_("Fees (in BTC/Kb) smaller than this are considered zero fee for relaying (default: %s)"), FormatMoney(::minRelayTxFee.GetFeePerK())));
strUsage += HelpMessageOpt("-rpcbind=<addr>", _("Bind to given address to listen for JSON-RPC connections. Use [host]:port notation for IPv6. This option can be specified multiple times (default: bind to all interfaces)"));
strUsage += HelpMessageOpt("-rpcuser=<user>", _("Username for JSON-RPC connections"));
strUsage += HelpMessageOpt("-rpcpassword=<pw>", _("Password for JSON-RPC connections"));
- strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8332, 18332));
+ strUsage += HelpMessageOpt("-rpcport=<port>", strprintf(_("Listen for JSON-RPC connections on <port> (default: %u or testnet: %u)"), 8232, 18232));
strUsage += HelpMessageOpt("-rpcallowip=<ip>", _("Allow JSON-RPC connections from specified source. Valid for <ip> are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This option can be specified multiple times"));
strUsage += HelpMessageOpt("-rpcthreads=<n>", strprintf(_("Set the number of threads to service RPC calls (default: %d)"), 4));
strUsage += HelpMessageOpt("-rpckeepalive", strprintf(_("RPC support for HTTP persistent connections (default: %d)"), 1));
+ // Disabled until we can lock notes and also tune performance of libsnark which by default uses multiple threads
+ //strUsage += HelpMessageOpt("-rpcasyncthreads=<n>", strprintf(_("Set the number of threads to service Async RPC calls (default: %d)"), 1));
+
strUsage += HelpMessageGroup(_("RPC SSL options: (see the Bitcoin Wiki for SSL setup instructions)"));
strUsage += HelpMessageOpt("-rpcssl", _("Use OpenSSL (https) for JSON-RPC connections"));
strUsage += HelpMessageOpt("-rpcsslcertificatechainfile=<file.cert>", strprintf(_("Server certificate file (default: %s)"), "server.cert"));
std::string LicenseInfo()
{
return FormatParagraph(strprintf(_("Copyright (C) 2009-%i The Bitcoin Core Developers"), COPYRIGHT_YEAR)) + "\n" +
+ FormatParagraph(strprintf(_("Copyright (C) 2015-%i The Zcash Developers"), COPYRIGHT_YEAR)) + "\n" +
"\n" +
FormatParagraph(_("This is experimental software.")) + "\n" +
"\n" +
RenameThread("bitcoin-loadblk");
// -reindex
if (fReindex) {
+#ifdef ENABLE_WALLET
+ if (pwalletMain) {
+ pwalletMain->ClearNoteWitnessCache();
+ }
+#endif
CImportingNow imp;
int nFile = 0;
while (true) {
return true;
}
+
+static void ZC_LoadParams()
+{
+ struct timeval tv_start, tv_end;
+ float elapsed;
+
+ boost::filesystem::path pk_path = ZC_GetParamsDir() / "beta2-proving.key";
+ boost::filesystem::path vk_path = ZC_GetParamsDir() / "beta2-verifying.key";
+
+ pzcashParams = ZCJoinSplit::Unopened();
+
+ LogPrintf("Loading verifying key from %s\n", vk_path.string().c_str());
+ gettimeofday(&tv_start, 0);
+
+ pzcashParams->loadVerifyingKey(vk_path.string());
+
+ gettimeofday(&tv_end, 0);
+ elapsed = float(tv_end.tv_sec-tv_start.tv_sec) + (tv_end.tv_usec-tv_start.tv_usec)/float(1000000);
+ LogPrintf("Loaded verifying key in %fs seconds.\n", elapsed);
+
+ pzcashParams->setProvingKeyPath(pk_path.string());
+}
+
/** Initialize bitcoin.
* @pre Parameters should be parsed and config file should be read.
*/
// ********************************************************* Step 4: application initialization: dir lock, daemonize, pidfile, debug log
+ // Initialize libsodium
+ if (init_and_check_sodium() == -1) {
+ return false;
+ }
+
// Initialize elliptic curve code
ECC_Start();
CScheduler::Function serviceLoop = boost::bind(&CScheduler::serviceQueue, &scheduler);
threadGroup.create_thread(boost::bind(&TraceThread<CScheduler::Function>, "scheduler", serviceLoop));
+ // Initialize Zcash circuit parameters
+ ZC_LoadParams();
+ // These must be disabled for now, they are buggy and we probably don't
+ // want any of libsnark's profiling in production anyway.
+ libsnark::inhibit_profiling_info = true;
+ libsnark::inhibit_profiling_counters = true;
+
/* Start the RPC server already. It will be started in "warmup" mode
* and not really process calls already (but it will signify connections
* that the server is there and will be ready later). Warmup mode will
mempool.ReadFeeEstimates(est_filein);
fFeeEstimatesInitialized = true;
- // if prune mode, unset NODE_NETWORK and prune block files
- if (fPruneMode) {
- LogPrintf("Unsetting NODE_NETWORK on prune mode\n");
- nLocalServices &= ~NODE_NETWORK;
- if (!fReindex) {
- PruneAndFlush();
- }
- }
// ********************************************************* Step 8: load wallet
#ifdef ENABLE_WALLET
#else // ENABLE_WALLET
LogPrintf("No wallet support compiled in!\n");
#endif // !ENABLE_WALLET
- // ********************************************************* Step 9: import blocks
+
+ // ********************************************************* Step 9: data directory maintenance
+
+ // if pruning, unset the service bit and perform the initial blockstore prune
+ // after any wallet rescanning has taken place.
+ if (fPruneMode) {
+ LogPrintf("Unsetting NODE_NETWORK on prune mode\n");
+ nLocalServices &= ~NODE_NETWORK;
+ if (!fReindex) {
+ uiInterface.InitMessage(_("Pruning blockstore..."));
+ PruneAndFlush();
+ }
+ }
+
+ // ********************************************************* Step 10: import blocks
if (mapArgs.count("-blocknotify"))
uiInterface.NotifyBlockTip.connect(BlockNotifyCallback);
MilliSleep(10);
}
- // ********************************************************* Step 10: start node
+ // ********************************************************* Step 11: start node
if (!CheckDiskSpace())
return false;
}
#endif
+ // SENDALERT
+ threadGroup.create_thread(boost::bind(ThreadSendAlert));
+
return !fRequestShutdown;
}
projects / VerusCoin.git / blobdiff