From 08d65024e0e833d705d0d7ecfb9216206ed81b41 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Wed, 8 Jan 2025 00:17:55 +0000 Subject: [PATCH] sunxi: switch Allwinner A10 boards to OF_UPSTREAM In contrast to some other Allwinner SoCs, there is no difference between the DTs for the Allwinner A10 SoCs (sun4i) between the U-Boot and the Linux kernel repository. Remove the old copies of the A10 related .dts and .dtsi files, and switch most of sun4i boards over to use OF_UPSTREAM. There are two boards for which we don't have DTs in the kernel tree. Keep those two .dts files in the legacy U-Boot DT directory, and let their defconfig opt out of OF_UPSTREAM. Signed-off-by: Andre Przywara Acked-by: Sumit Garg --- arch/arm/dts/Makefile | 24 +- arch/arm/dts/sun4i-a10-a1000.dts | 255 ---- arch/arm/dts/sun4i-a10-ba10-tvbox.dts | 151 -- arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts | 159 --- arch/arm/dts/sun4i-a10-cubieboard.dts | 255 ---- arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts | 218 --- arch/arm/dts/sun4i-a10-gemei-g9.dts | 192 --- arch/arm/dts/sun4i-a10-hackberry.dts | 140 -- arch/arm/dts/sun4i-a10-hyundai-a7hd.dts | 115 -- arch/arm/dts/sun4i-a10-inet1.dts | 229 --- arch/arm/dts/sun4i-a10-inet97fv2.dts | 203 --- arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 357 ----- .../dts/sun4i-a10-itead-iteaduino-plus.dts | 126 -- arch/arm/dts/sun4i-a10-jesurun-q5.dts | 181 --- arch/arm/dts/sun4i-a10-marsboard.dts | 182 --- arch/arm/dts/sun4i-a10-mini-xplus.dts | 144 -- arch/arm/dts/sun4i-a10-mk802.dts | 144 -- arch/arm/dts/sun4i-a10-mk802ii.dts | 111 -- arch/arm/dts/sun4i-a10-olinuxino-lime.dts | 225 --- arch/arm/dts/sun4i-a10-pcduino.dts | 200 --- arch/arm/dts/sun4i-a10-pcduino2.dts | 67 - arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts | 206 --- arch/arm/dts/sun4i-a10-topwise-a721.dts | 242 ---- arch/arm/dts/sun4i-a10.dtsi | 1271 ----------------- arch/arm/mach-sunxi/Kconfig | 1 + configs/A10-OLinuXino-Lime_defconfig | 2 +- configs/Chuwi_V7_CW0825_defconfig | 2 +- configs/Cubieboard_defconfig | 2 +- configs/Hyundai_A7HD_defconfig | 2 +- configs/Linksprite_pcDuino_defconfig | 2 +- configs/Marsboard_A10_defconfig | 2 +- configs/Mele_A1000_defconfig | 2 +- configs/Mini-X_defconfig | 2 +- configs/ba10_tv_box_defconfig | 2 +- configs/dserve_dsrv9703c_defconfig | 2 +- configs/iNet_3F_defconfig | 1 + configs/iNet_3W_defconfig | 1 + configs/inet1_defconfig | 2 +- configs/inet97fv2_defconfig | 2 +- configs/inet9f_rev03_defconfig | 2 +- configs/jesurun_q5_defconfig | 2 +- configs/mk802_defconfig | 2 +- configs/mk802ii_defconfig | 2 +- configs/pov_protab2_ips9_defconfig | 2 +- configs/sunxi_Gemei_G9_defconfig | 2 +- 45 files changed, 22 insertions(+), 5414 deletions(-) delete mode 100644 arch/arm/dts/sun4i-a10-a1000.dts delete mode 100644 arch/arm/dts/sun4i-a10-ba10-tvbox.dts delete mode 100644 arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts delete mode 100644 arch/arm/dts/sun4i-a10-cubieboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts delete mode 100644 arch/arm/dts/sun4i-a10-gemei-g9.dts delete mode 100644 arch/arm/dts/sun4i-a10-hackberry.dts delete mode 100644 arch/arm/dts/sun4i-a10-hyundai-a7hd.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet1.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet97fv2.dts delete mode 100644 arch/arm/dts/sun4i-a10-inet9f-rev03.dts delete mode 100644 arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts delete mode 100644 arch/arm/dts/sun4i-a10-jesurun-q5.dts delete mode 100644 arch/arm/dts/sun4i-a10-marsboard.dts delete mode 100644 arch/arm/dts/sun4i-a10-mini-xplus.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802.dts delete mode 100644 arch/arm/dts/sun4i-a10-mk802ii.dts delete mode 100644 arch/arm/dts/sun4i-a10-olinuxino-lime.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino.dts delete mode 100644 arch/arm/dts/sun4i-a10-pcduino2.dts delete mode 100644 arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts delete mode 100644 arch/arm/dts/sun4i-a10-topwise-a721.dts delete mode 100644 arch/arm/dts/sun4i-a10.dtsi diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index f490031fbdf..55eb9d032f6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -531,30 +531,8 @@ dtb-$(CONFIG_STM32H7) += stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb dtb-$(CONFIG_MACH_SUN4I) += \ - sun4i-a10-a1000.dtb \ - sun4i-a10-ba10-tvbox.dtb \ - sun4i-a10-chuwi-v7-cw0825.dtb \ - sun4i-a10-cubieboard.dtb \ - sun4i-a10-dserve-dsrv9703c.dtb \ - sun4i-a10-gemei-g9.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-hyundai-a7hd.dtb \ - sun4i-a10-inet1.dtb \ sun4i-a10-inet-3f.dtb \ - sun4i-a10-inet-3w.dtb \ - sun4i-a10-inet97fv2.dtb \ - sun4i-a10-inet9f-rev03.dtb \ - sun4i-a10-itead-iteaduino-plus.dtb \ - sun4i-a10-jesurun-q5.dtb \ - sun4i-a10-marsboard.dtb \ - sun4i-a10-mini-xplus.dtb \ - sun4i-a10-mk802.dtb \ - sun4i-a10-mk802ii.dtb \ - sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ - sun4i-a10-pcduino2.dtb \ - sun4i-a10-pov-protab2-ips9.dtb \ - sun4i-a10-topwise-a721.dtb + sun4i-a10-inet-3w.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts deleted file mode 100644 index 20f9ed24485..00000000000 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2013 Emilio López - * - * Emilio López - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "Mele A1000"; - compatible = "mele,a1000", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "a1000:red:usr"; - gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "a1000:blue:pwr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "On-board SPDIF"; - - simple-audio-card,cpu { - sound-dai = <&spdif>; - }; - - simple-audio-card,codec { - sound-dai = <&spdif_out>; - }; - }; - - spdif_out: spdif-out { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spdif { - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/dts/sun4i-a10-ba10-tvbox.dts deleted file mode 100644 index 816d534ac09..00000000000 --- a/arch/arm/dts/sun4i-a10-ba10-tvbox.dts +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright 2014 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "BA10 tvbox"; - compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts deleted file mode 100644 index 74262988881..00000000000 --- a/arch/arm/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include - -/ { - model = "Chuwi V7 CW0825"; - compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - - ft5306de4: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - }; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button-800 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Back"; - linux,code = ; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-cubieboard.dts b/arch/arm/dts/sun4i-a10-cubieboard.dts deleted file mode 100644 index 0645d606423..00000000000 --- a/arch/arm/dts/sun4i-a10-cubieboard.dts +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright 2012 Stefan Roese - * Stefan Roese - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "Cubietech Cubieboard"; - compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard>; - - led-0 { - label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ - }; - - led-1 { - label = "cubieboard:green:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ - linux,default-trigger = "heartbeat"; - }; - }; -}; - -&ahci { - target-supply = <®_ahci_5v>; - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&i2c1 { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_cubieboard: led-pins { - pins = "PH20", "PH21"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -®_ahci_5v { - status = "okay"; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1450000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts deleted file mode 100644 index 63e77c05bfd..00000000000 --- a/arch/arm/dts/sun4i-a10-dserve-dsrv9703c.dts +++ /dev/null @@ -1,218 +0,0 @@ -/* - * Copyright 2016 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include -#include - -/ { - model = "Dserve DSRV9703C"; - compatible = "dserve,dsrv9703c", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <®_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - haptics { - compatible = "regulator-haptic"; - haptic-supply = <®_motor>; - min-microvolt = <3000000>; - max-microvolt = <3000000>; - }; - - reg_motor: reg-motor { - compatible = "regulator-fixed"; - regulator-name = "vcc-motor"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - enable-active-high; - gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - }; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - /* pull-ups and devices require AXP209 LDO3 */ - status = "failed"; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; - - button-800 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-gemei-g9.dts b/arch/arm/dts/sun4i-a10-gemei-g9.dts deleted file mode 100644 index ea7a59dcf8f..00000000000 --- a/arch/arm/dts/sun4i-a10-gemei-g9.dts +++ /dev/null @@ -1,192 +0,0 @@ -/* - * Copyright 2015 Priit Laes - * - * Priit Laes - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include - -/ { - model = "Gemei G9 Tablet"; - compatible = "gemei,g9", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -/* - * TODO: - * 2x cameras via CSI - * AXP battery management - * NAND - * OTG - * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 - */ -&codec { - /* PH15 controls power to external amplifier (ft2012q) */ - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */ - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - - status = "okay"; - - button-158 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <158730>; - }; - - button-349 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <349206>; - }; - - button-1142 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1142856>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts deleted file mode 100644 index 47dea092250..00000000000 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "Miniand Hackberry"; - compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy0>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts deleted file mode 100644 index bf2044bac42..00000000000 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include - -/ { - model = "Hyundai A7HD"; - compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb2_vbus { - gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet1.dts b/arch/arm/dts/sun4i-a10-inet1.dts deleted file mode 100644 index 60e432a0ef1..00000000000 --- a/arch/arm/dts/sun4i-a10-inet1.dts +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include -#include - -/ { - model = "iNet-1"; - compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <®_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ - }; -}; - -&i2c2 { - status = "okay"; - - ft5x: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */ - touchscreen-size-x = <600>; - touchscreen-size-y = <1024>; - touchscreen-swapped-x-y; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button-1000 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet97fv2.dts b/arch/arm/dts/sun4i-a10-inet97fv2.dts deleted file mode 100644 index 76016f2ca29..00000000000 --- a/arch/arm/dts/sun4i-a10-inet97fv2.dts +++ /dev/null @@ -1,203 +0,0 @@ -/* - * Copyright 2014 Open Source Support GmbH - * - * David Lanzendörfer - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include - -/ { - model = "INet-97F Rev 02"; - compatible = "primux,inet97fv2", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-200 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button-600 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <600000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/dts/sun4i-a10-inet9f-rev03.dts deleted file mode 100644 index 62e7aa587f8..00000000000 --- a/arch/arm/dts/sun4i-a10-inet9f-rev03.dts +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include - -/ { - model = "iNet-9F Rev 03"; - compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - event-left-joystick-left { - label = "Left Joystick Left"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ - }; - - event-left-joystick-right { - label = "Left Joystick Right"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ - }; - - event-left-joystick-up { - label = "Left Joystick Up"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ - }; - - event-left-joystick-down { - label = "Left Joystick Down"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ - }; - - event-right-joystick-left { - label = "Right Joystick Left"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ - }; - - event-right-joystick-right { - label = "Right Joystick Right"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ - }; - - event-right-joystick-up { - label = "Right Joystick Up"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ - }; - - event-right-joystick-down { - label = "Right Joystick Down"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ - }; - - event-dpad-left { - label = "DPad Left"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ - }; - - event-dpad-right { - label = "DPad Right"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ - }; - - event-dpad-up { - label = "DPad Up"; - linux,code = ; - linux,input-type = ; - linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ - }; - - event-dpad-down { - label = "DPad Down"; - linux,code = ; - linux,input-type = ; - linux,input-value = <1>; - gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ - }; - - event-x { - label = "Button X"; - linux,code = ; - gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ - }; - - event-y { - label = "Button Y"; - linux,code = ; - gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ - }; - - event-a { - label = "Button A"; - linux,code = ; - gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ - }; - - event-b { - label = "Button B"; - linux,code = ; - gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ - }; - - event-select { - label = "Select Button"; - linux,code = ; - gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ - }; - - event-start { - label = "Start Button"; - linux,code = ; - gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ - }; - - event-top-left { - label = "Top Left Button"; - linux,code = ; - gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ - }; - - event-top-right { - label = "Top Right Button"; - linux,code = ; - gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ - }; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - status = "okay"; - - /* Accelerometer */ - bma250@18 { - compatible = "bosch,bma250"; - reg = <0x18>; - interrupt-parent = <&pio>; - interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ - }; -}; - -&i2c2 { - status = "okay"; - - ft5406ee8: touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-200 { - label = "Menu"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button-600 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <600000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; - - button-1000 { - label = "Home"; - linux,code = ; - channel = <0>; - voltage = <1000000>; - }; - - button-1200 { - label = "Esc"; - linux,code = ; - channel = <0>; - voltage = <1200000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts deleted file mode 100644 index d4e319d16aa..00000000000 --- a/arch/arm/dts/sun4i-a10-itead-iteaduino-plus.dts +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Copyright 2015 Josef Gajdusek - * Copyright 2015 - Marcus Cooper - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-itead-core-common.dtsi" - -/ { - model = "Iteaduino Plus A10"; - compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; -}; - -&ahci { - target-supply = <®_ahci_5v>; - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins>; - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - - axp209: pmic@34 { - interrupts = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -®_ahci_5v { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-0 = <&uart0_pb_pins>; -}; diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts deleted file mode 100644 index 1aeb0bd5519..00000000000 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Copyright 2015 Gábor Nyers - * - * Gábor Nyers - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "Jesurun Q5"; - compatible = "jesurun,q5", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led { - label = "q5:green:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ - }; - - }; - - reg_emac_3v3: emac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "emac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <20000>; - enable-active-high; - gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ - }; -}; - -&ahci { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&mdio { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-marsboard.dts b/arch/arm/dts/sun4i-a10-marsboard.dts deleted file mode 100644 index 81fdb217d33..00000000000 --- a/arch/arm/dts/sun4i-a10-marsboard.dts +++ /dev/null @@ -1,182 +0,0 @@ -/* - * Copyright 2015 Aleksei Mamlin - * Aleksei Mamlin - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "HAOYU Electronics Marsboard A10"; - compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "marsboard:red1:usr"; - gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "marsboard:red2:usr"; - gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; - }; - - led-2 { - label = "marsboard:red3:usr"; - gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; - }; - - led-3 { - label = "marsboard:red4:usr"; - gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&ahci { - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&i2c2 { - status = "okay"; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pi_pins>, - <&spi0_cs0_pi_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mini-xplus.dts b/arch/arm/dts/sun4i-a10-mini-xplus.dts deleted file mode 100644 index f9d74e21031..00000000000 --- a/arch/arm/dts/sun4i-a10-mini-xplus.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2012 Maxime Ripard - * - * Maxime Ripard - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "PineRiver Mini X-Plus"; - compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&ir0 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins>; - status = "okay"; -}; - -&ir0_rx_pins { - /* The ir receiver is not always populated */ - bias-pull-up; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - regulator-boot-on; - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mk802.dts b/arch/arm/dts/sun4i-a10-mk802.dts deleted file mode 100644 index 059fe9c5d02..00000000000 --- a/arch/arm/dts/sun4i-a10-mk802.dts +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include - -/ { - model = "MK802"; - compatible = "allwinner,mk802", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; -}; - -&codec { - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-mk802ii.dts b/arch/arm/dts/sun4i-a10-mk802ii.dts deleted file mode 100644 index 17dcdf03111..00000000000 --- a/arch/arm/dts/sun4i-a10-mk802ii.dts +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include - -/ { - model = "MK802ii"; - compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/dts/sun4i-a10-olinuxino-lime.dts deleted file mode 100644 index 83d283cf663..00000000000 --- a/arch/arm/dts/sun4i-a10-olinuxino-lime.dts +++ /dev/null @@ -1,225 +0,0 @@ -/* - * Copyright 2014 - Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include - -/ { - model = "Olimex A10-OLinuXino-LIME"; - compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; - - led { - label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; -}; - -&ahci { - target-supply = <®_ahci_5v>; - status = "okay"; -}; - -&cpu0 { - /* - * The A10-Lime is known to be unstable when running at 1008 MHz - */ - operating-points = - /* kHz uV */ - <912000 1350000>, - <864000 1300000>, - <624000 1250000>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; -}; - -&i2c1 { - status = "okay"; - - eeprom: eeprom@50 { - compatible = "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - led_pins_olinuxinolime: led-pin { - pins = "PH2"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -®_ahci_5v { - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pcduino.dts b/arch/arm/dts/sun4i-a10-pcduino.dts deleted file mode 100644 index a332d61fd56..00000000000 --- a/arch/arm/dts/sun4i-a10-pcduino.dts +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright 2014 Zoltan HERPAI - * Zoltan HERPAI - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include - -/ { - model = "LinkSprite pcDuino"; - compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "pcduino:green:tx"; - gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; - }; - - led-1 { - label = "pcduino:green:rx"; - gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-back { - label = "Key Back"; - linux,code = ; - gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; - }; - - key-home { - label = "Key Home"; - linux,code = ; - gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; - }; - - key-menu { - label = "Key Menu"; - linux,code = ; - gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&emac { - phy-handle = <&phy1>; - status = "okay"; -}; - -&emac_sram { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -&mdio { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -#include "axp209.dtsi" - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ - usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pcduino2.dts b/arch/arm/dts/sun4i-a10-pcduino2.dts deleted file mode 100644 index bc4f128965e..00000000000 --- a/arch/arm/dts/sun4i-a10-pcduino2.dts +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Copyright 2015 Siarhei Siamashka - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * The LinkSprite pcDuino2 board is almost identical to the older - * LinkSprite pcDuino1 board. The only software visible difference - * is that the pcDuino2 board got a USB VBUS voltage regulator, which - * is controlled by the PD2 pin (pulled-up by default). Also one of - * the USB host ports has been replaced with a USB WIFI chip. - */ - -#include "sun4i-a10-pcduino.dts" - -/ { - model = "LinkSprite pcDuino2"; - compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; -}; - -®_usb2_vbus { - gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */ - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts deleted file mode 100644 index c3259694764..00000000000 --- a/arch/arm/dts/sun4i-a10-pov-protab2-ips9.dts +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include -#include - -/ { - model = "Point of View Protab2-IPS9"; - compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - power-supply = <®_vcc3v3>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&codec { - allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - /* pull-ups and devices require AXP209 LDO3 */ - status = "failed"; -}; - -&i2c2 { - status = "okay"; - - touchscreen@5c { - compatible = "pixcir,pixcir_tangoc"; - reg = <0x5c>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ - attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */ - enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; - wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <1024>; - touchscreen-size-y = <768>; - touchscreen-inverted-x; - touchscreen-inverted-y; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-400 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; - - button-800 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <800000>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10-topwise-a721.dts b/arch/arm/dts/sun4i-a10-topwise-a721.dts deleted file mode 100644 index 3628f12d252..00000000000 --- a/arch/arm/dts/sun4i-a10-topwise-a721.dts +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2020 Pascal Roeleven - */ - -/dts-v1/; -#include "sun4i-a10.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include -#include - -/ { - model = "Topwise A721"; - compatible = "topwise,a721", "allwinner,sun4i-a10"; - - aliases { - serial0 = &uart0; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>; - power-supply = <®_vbat>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - panel { - compatible = "starry,kr070pe2t"; - backlight = <&backlight>; - power-supply = <®_lcd_power>; - - port { - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; - }; - - reg_lcd_power: reg-lcd-power { - compatible = "regulator-fixed"; - regulator-name = "reg-lcd-power"; - gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - enable-active-high; - }; - - reg_vbat: reg-vbat { - compatible = "regulator-fixed"; - regulator-name = "vbat"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -&battery_power_supply { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - accelerometer@4c { - compatible = "fsl,mma7660"; - reg = <0x4c>; - }; -}; - -&i2c2 { - status = "okay"; - - touchscreen@38 { - compatible = "edt,edt-ft5406"; - reg = <0x38>; - interrupt-parent = <&pio>; - interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - vcc-supply = <®_vcc3v3>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button-571 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <571428>; - }; - - button-761 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <761904>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - vcc-pb-supply = <®_vcc3v3>; - vcc-pf-supply = <®_vcc3v3>; - vcc-ph-supply = <®_vcc3v3>; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pin>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&tcon0_out { - tcon0_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi deleted file mode 100644 index 51a6464aab9..00000000000 --- a/arch/arm/dts/sun4i-a10.dtsi +++ /dev/null @@ -1,1271 +0,0 @@ -/* - * Copyright 2012 Stefan Roese - * Stefan Roese - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include -#include -#include -#include - -/ { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - aliases { - ethernet0 = &emac; - }; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer-lcd0-hdmi { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, - <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>; - status = "disabled"; - }; - - framebuffer-fe0-lcd0-hdmi { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>, - <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, - <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>, - <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; - status = "disabled"; - }; - - framebuffer-fe0-lcd0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>, - <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>, - <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; - status = "disabled"; - }; - - framebuffer-fe0-lcd0-tve0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>, - <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>, - <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>, - <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>, - <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>; - status = "disabled"; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&ccu CLK_CPU>; - clock-latency = <244144>; /* 8 32k periods */ - operating-points = - /* kHz uV */ - <1008000 1400000>, - <912000 1350000>, - <864000 1300000>, - <624000 1250000>; - #cooling-cells = <2>; - }; - }; - - thermal-zones { - cpu-thermal { - /* milliseconds */ - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&rtp>; - - cooling-maps { - map0 { - trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - - trips { - cpu_alert0: cpu-alert0 { - /* milliCelsius */ - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - /* milliCelsius */ - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: clk-24M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk-32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - }; - - de: display-engine { - compatible = "allwinner,sun4i-a10-display-engine"; - allwinner,pipelines = <&fe0>, <&fe1>; - status = "disabled"; - }; - - pmu { - compatible = "arm,cortex-a8-pmu"; - interrupts = <3>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - default-pool { - compatible = "shared-dma-pool"; - size = <0x6000000>; - alloc-ranges = <0x40000000 0x10000000>; - reusable; - linux,cma-default; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - system-control@1c00000 { - compatible = "allwinner,sun4i-a10-system-control"; - reg = <0x01c00000 0x30>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sram_a: sram@0 { - compatible = "mmio-sram"; - reg = <0x00000000 0xc000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00000000 0xc000>; - - emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; - reg = <0x8000 0x4000>; - status = "disabled"; - }; - }; - - sram_d: sram@10000 { - compatible = "mmio-sram"; - reg = <0x00010000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x00010000 0x1000>; - - otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; - reg = <0x0000 0x1000>; - status = "disabled"; - }; - }; - - sram_c: sram@1d00000 { - compatible = "mmio-sram"; - reg = <0x01d00000 0xd0000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x01d00000 0xd0000>; - - ve_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-c1"; - reg = <0x000000 0x80000>; - }; - }; - }; - - dma: dma-controller@1c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ccu CLK_AHB_DMA>; - #dma-cells = <2>; - }; - - nfc: nand-controller@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 3>; - dma-names = "rxtx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi0: spi@1c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@1c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - emac: ethernet@1c0b000 { - compatible = "allwinner,sun4i-a10-emac"; - reg = <0x01c0b000 0x1000>; - interrupts = <55>; - clocks = <&ccu CLK_AHB_EMAC>; - allwinner,sram = <&emac_sram 1>; - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins>; - status = "disabled"; - }; - - mdio: mdio@1c0b080 { - compatible = "allwinner,sun4i-a10-mdio"; - reg = <0x01c0b080 0x14>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun4i-a10-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&ccu RST_TCON0>; - reset-names = "lcd"; - clocks = <&ccu CLK_AHB_LCD0>, - <&ccu CLK_TCON0_CH0>, - <&ccu CLK_TCON0_CH1>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon0-pixel-clock"; - #clock-cells = <0>; - dmas = <&dma SUN4I_DMA_DEDICATED 14>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - - tcon0_in_be1: endpoint@1 { - reg = <1>; - remote-endpoint = <&be1_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint = <&hdmi_in_tcon0>; - allwinner,tcon-channel = <1>; - }; - }; - }; - }; - - tcon1: lcd-controller@1c0d000 { - compatible = "allwinner,sun4i-a10-tcon"; - reg = <0x01c0d000 0x1000>; - interrupts = <45>; - resets = <&ccu RST_TCON1>; - reset-names = "lcd"; - clocks = <&ccu CLK_AHB_LCD1>, - <&ccu CLK_TCON1_CH0>, - <&ccu CLK_TCON1_CH1>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon1-pixel-clock"; - #clock-cells = <0>; - dmas = <&dma SUN4I_DMA_DEDICATED 15>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon1_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon1>; - }; - - tcon1_in_be1: endpoint@1 { - reg = <1>; - remote-endpoint = <&be1_out_tcon1>; - }; - }; - - tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon1_out_hdmi: endpoint@1 { - reg = <1>; - remote-endpoint = <&hdmi_in_tcon1>; - allwinner,tcon-channel = <1>; - }; - }; - }; - }; - - video-codec@1c0e000 { - compatible = "allwinner,sun4i-a10-video-engine"; - reg = <0x01c0e000 0x1000>; - clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, - <&ccu CLK_DRAM_VE>; - clock-names = "ahb", "mod", "ram"; - resets = <&ccu RST_VE>; - interrupts = <53>; - allwinner,sram = <&ve_sram 1>; - }; - - mmc0: mmc@1c0f000 { - compatible = "allwinner,sun4i-a10-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>; - clock-names = "ahb", "mmc"; - interrupts = <32>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@1c10000 { - compatible = "allwinner,sun4i-a10-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>; - clock-names = "ahb", "mmc"; - interrupts = <33>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@1c11000 { - compatible = "allwinner,sun4i-a10-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>; - clock-names = "ahb", "mmc"; - interrupts = <34>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc3: mmc@1c12000 { - compatible = "allwinner,sun4i-a10-mmc"; - reg = <0x01c12000 0x1000>; - clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>; - clock-names = "ahb", "mmc"; - interrupts = <35>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usb_otg: usb@1c13000 { - compatible = "allwinner,sun4i-a10-musb"; - reg = <0x01c13000 0x0400>; - clocks = <&ccu CLK_AHB_OTG>; - interrupts = <38>; - interrupt-names = "mc"; - phys = <&usbphy 0>; - phy-names = "usb"; - extcon = <&usbphy 0>; - allwinner,sram = <&otg_sram 1>; - dr_mode = "otg"; - status = "disabled"; - }; - - usbphy: phy@1c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun4i-a10-usb-phy"; - reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; - reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&ccu CLK_USB_PHY>; - clock-names = "usb_phy"; - resets = <&ccu RST_USB_PHY0>, - <&ccu RST_USB_PHY1>, - <&ccu RST_USB_PHY2>; - reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; - status = "disabled"; - }; - - ehci0: usb@1c14000 { - compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ccu CLK_AHB_EHCI0>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@1c14400 { - compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <64>; - clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - crypto: crypto-engine@1c15000 { - compatible = "allwinner,sun4i-a10-crypto"; - reg = <0x01c15000 0x1000>; - interrupts = <86>; - clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>; - clock-names = "ahb", "mod"; - }; - - hdmi: hdmi@1c16000 { - compatible = "allwinner,sun4i-a10-hdmi"; - reg = <0x01c16000 0x1000>; - interrupts = <58>; - clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>, - <&ccu CLK_PLL_VIDEO0_2X>, - <&ccu CLK_PLL_VIDEO1_2X>; - clock-names = "ahb", "mod", "pll-0", "pll-1"; - dmas = <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_NORMAL 16>, - <&dma SUN4I_DMA_DEDICATED 24>; - dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - hdmi_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hdmi_in_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_out_hdmi>; - }; - - hdmi_in_tcon1: endpoint@1 { - reg = <1>; - remote-endpoint = <&tcon1_out_hdmi>; - }; - }; - - hdmi_out: port@1 { - reg = <1>; - }; - }; - }; - - spi2: spi@1c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - ahci: sata@1c18000 { - compatible = "allwinner,sun4i-a10-ahci"; - reg = <0x01c18000 0x1000>; - interrupts = <56>; - clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>; - status = "disabled"; - }; - - ehci1: usb@1c1c000 { - compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; - reg = <0x01c1c000 0x100>; - interrupts = <40>; - clocks = <&ccu CLK_AHB_EHCI1>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci1: usb@1c1c400 { - compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; - reg = <0x01c1c400 0x100>; - interrupts = <65>; - clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - csi1: csi@1c1d000 { - compatible = "allwinner,sun4i-a10-csi1"; - reg = <0x01c1d000 0x1000>; - interrupts = <43>; - clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>; - clock-names = "bus", "ram"; - resets = <&ccu RST_CSI1>; - status = "disabled"; - }; - - spi3: spi@1c1f000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c1f000 0x1000>; - interrupts = <50>; - clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 31>, - <&dma SUN4I_DMA_DEDICATED 30>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - ccu: clock@1c20000 { - compatible = "allwinner,sun4i-a10-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - intc: interrupt-controller@1c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@1c20800 { - compatible = "allwinner,sun4i-a10-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - interrupt-controller; - #interrupt-cells = <3>; - #gpio-cells = <3>; - - can0_ph_pins: can0-ph-pins { - pins = "PH20", "PH21"; - function = "can"; - }; - - /omit-if-no-ref/ - csi1_8bits_pg_pins: csi1-8bits-pg-pins { - pins = "PG0", "PG2", "PG3", "PG4", "PG5", - "PG6", "PG7", "PG8", "PG9", "PG10", - "PG11"; - function = "csi1"; - }; - - /omit-if-no-ref/ - csi1_24bits_ph_pins: csi1-24bits-ph-pins { - pins = "PH0", "PH1", "PH2", "PH3", "PH4", - "PH5", "PH6", "PH7", "PH8", "PH9", - "PH10", "PH11", "PH12", "PH13", "PH14", - "PH15", "PH16", "PH17", "PH18", "PH19", - "PH20", "PH21", "PH22", "PH23", "PH24", - "PH25", "PH26", "PH27"; - function = "csi1"; - }; - - /omit-if-no-ref/ - csi1_clk_pg_pin: csi1-clk-pg-pin { - pins = "PG1"; - function = "csi1"; - }; - - emac_pins: emac0-pins { - pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - function = "emac"; - }; - - i2c0_pins: i2c0-pins { - pins = "PB0", "PB1"; - function = "i2c0"; - }; - - i2c1_pins: i2c1-pins { - pins = "PB18", "PB19"; - function = "i2c1"; - }; - - i2c2_pins: i2c2-pins { - pins = "PB20", "PB21"; - function = "i2c2"; - }; - - ir0_rx_pins: ir0-rx-pin { - pins = "PB4"; - function = "ir0"; - }; - - ir0_tx_pins: ir0-tx-pin { - pins = "PB3"; - function = "ir0"; - }; - - ir1_rx_pins: ir1-rx-pin { - pins = "PB23"; - function = "ir1"; - }; - - ir1_tx_pins: ir1-tx-pin { - pins = "PB22"; - function = "ir1"; - }; - - mmc0_pins: mmc0-pins { - pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - bias-pull-up; - }; - - ps2_ch0_pins: ps2-ch0-pins { - pins = "PI20", "PI21"; - function = "ps2"; - }; - - ps2_ch1_ph_pins: ps2-ch1-ph-pins { - pins = "PH12", "PH13"; - function = "ps2"; - }; - - pwm0_pin: pwm0-pin { - pins = "PB2"; - function = "pwm"; - }; - - pwm1_pin: pwm1-pin { - pins = "PI3"; - function = "pwm"; - }; - - spdif_tx_pin: spdif-tx-pin { - pins = "PB13"; - function = "spdif"; - bias-pull-up; - }; - - spi0_pi_pins: spi0-pi-pins { - pins = "PI11", "PI12", "PI13"; - function = "spi0"; - }; - - spi0_cs0_pi_pin: spi0-cs0-pi-pin { - pins = "PI10"; - function = "spi0"; - }; - - spi1_pins: spi1-pins { - pins = "PI17", "PI18", "PI19"; - function = "spi1"; - }; - - spi1_cs0_pin: spi1-cs0-pin { - pins = "PI16"; - function = "spi1"; - }; - - spi2_pb_pins: spi2-pb-pins { - pins = "PB15", "PB16", "PB17"; - function = "spi2"; - }; - - spi2_pc_pins: spi2-pc-pins { - pins = "PC20", "PC21", "PC22"; - function = "spi2"; - }; - - spi2_cs0_pb_pin: spi2-cs0-pb-pin { - pins = "PB14"; - function = "spi2"; - }; - - spi2_cs0_pc_pins: spi2-cs0-pc-pin { - pins = "PC19"; - function = "spi2"; - }; - - uart0_pb_pins: uart0-pb-pins { - pins = "PB22", "PB23"; - function = "uart0"; - }; - - uart0_pf_pins: uart0-pf-pins { - pins = "PF2", "PF4"; - function = "uart0"; - }; - - uart1_pins: uart1-pins { - pins = "PA10", "PA11"; - function = "uart1"; - }; - }; - - timer@1c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>, - <23>, - <24>, - <25>, - <67>, - <68>; - clocks = <&osc24M>; - }; - - wdt: watchdog@1c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - interrupts = <24>; - clocks = <&osc24M>; - }; - - rtc: rtc@1c20d00 { - compatible = "allwinner,sun4i-a10-rtc"; - reg = <0x01c20d00 0x20>; - interrupts = <24>; - }; - - pwm: pwm@1c20e00 { - compatible = "allwinner,sun4i-a10-pwm"; - reg = <0x01c20e00 0xc>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - spdif: spdif@1c21000 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-spdif"; - reg = <0x01c21000 0x400>; - interrupts = <13>; - clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>; - clock-names = "apb", "spdif"; - dmas = <&dma SUN4I_DMA_NORMAL 2>, - <&dma SUN4I_DMA_NORMAL 2>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - ir0: ir@1c21800 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>; - clock-names = "apb", "ir"; - interrupts = <5>; - reg = <0x01c21800 0x40>; - status = "disabled"; - }; - - ir1: ir@1c21c00 { - compatible = "allwinner,sun4i-a10-ir"; - clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>; - clock-names = "apb", "ir"; - interrupts = <6>; - reg = <0x01c21c00 0x40>; - status = "disabled"; - }; - - i2s0: i2s@1c22400 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-i2s"; - reg = <0x01c22400 0x400>; - interrupts = <16>; - clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>; - clock-names = "apb", "mod"; - dmas = <&dma SUN4I_DMA_NORMAL 3>, - <&dma SUN4I_DMA_NORMAL 3>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - lradc: lradc@1c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - codec: codec@1c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun4i-a10-codec"; - reg = <0x01c22c00 0x40>; - interrupts = <30>; - clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>; - clock-names = "apb", "codec"; - dmas = <&dma SUN4I_DMA_NORMAL 19>, - <&dma SUN4I_DMA_NORMAL 19>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - sid: eeprom@1c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@1c25000 { - compatible = "allwinner,sun4i-a10-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart0: serial@1c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <1>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART0>; - status = "disabled"; - }; - - uart1: serial@1c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART1>; - status = "disabled"; - }; - - uart2: serial@1c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <3>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART2>; - status = "disabled"; - }; - - uart3: serial@1c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART3>; - status = "disabled"; - }; - - uart4: serial@1c29000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29000 0x400>; - interrupts = <17>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART4>; - status = "disabled"; - }; - - uart5: serial@1c29400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29400 0x400>; - interrupts = <18>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART5>; - status = "disabled"; - }; - - uart6: serial@1c29800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29800 0x400>; - interrupts = <19>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART6>; - status = "disabled"; - }; - - uart7: serial@1c29c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29c00 0x400>; - interrupts = <20>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_APB1_UART7>; - status = "disabled"; - }; - - ps20: ps2@1c2a000 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a000 0x400>; - interrupts = <62>; - clocks = <&ccu CLK_APB1_PS20>; - status = "disabled"; - }; - - ps21: ps2@1c2a400 { - compatible = "allwinner,sun4i-a10-ps2"; - reg = <0x01c2a400 0x400>; - interrupts = <63>; - clocks = <&ccu CLK_APB1_PS21>; - status = "disabled"; - }; - - i2c0: i2c@1c2ac00 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&ccu CLK_APB1_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@1c2b000 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&ccu CLK_APB1_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@1c2b400 { - compatible = "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&ccu CLK_APB1_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - can0: can@1c2bc00 { - compatible = "allwinner,sun4i-a10-can"; - reg = <0x01c2bc00 0x400>; - interrupts = <26>; - clocks = <&ccu CLK_APB1_CAN>; - status = "disabled"; - }; - - mali: gpu@1c40000 { - compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; - reg = <0x01c40000 0x10000>; - interrupts = <69>, - <70>, - <71>, - <72>, - <73>; - interrupt-names = "gp", - "gpmmu", - "pp0", - "ppmmu0", - "pmu"; - clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; - clock-names = "bus", "core"; - resets = <&ccu RST_GPU>; - - assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <384000000>; - }; - - fe0: display-frontend@1e00000 { - compatible = "allwinner,sun4i-a10-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>, - <&ccu CLK_DRAM_DE_FE0>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_FE0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - - fe0_out_be1: endpoint@1 { - reg = <1>; - remote-endpoint = <&be1_in_fe0>; - }; - }; - }; - }; - - fe1: display-frontend@1e20000 { - compatible = "allwinner,sun4i-a10-display-frontend"; - reg = <0x01e20000 0x20000>; - interrupts = <48>; - clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>, - <&ccu CLK_DRAM_DE_FE1>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_FE1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe1_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe1>; - }; - - fe1_out_be1: endpoint@1 { - reg = <1>; - remote-endpoint = <&be1_in_fe1>; - }; - }; - }; - }; - - be1: display-backend@1e40000 { - compatible = "allwinner,sun4i-a10-display-backend"; - reg = <0x01e40000 0x10000>; - interrupts = <48>; - clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>, - <&ccu CLK_DRAM_DE_BE1>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_BE1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be1_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be1>; - }; - - be1_in_fe1: endpoint@1 { - reg = <1>; - remote-endpoint = <&fe1_out_be1>; - }; - }; - - be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be1_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be1>; - }; - - be1_out_tcon1: endpoint@1 { - reg = <1>; - remote-endpoint = <&tcon1_in_be1>; - }; - }; - }; - }; - - be0: display-backend@1e60000 { - compatible = "allwinner,sun4i-a10-display-backend"; - reg = <0x01e60000 0x10000>; - interrupts = <47>; - clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>, - <&ccu CLK_DRAM_DE_BE0>; - clock-names = "ahb", "mod", - "ram"; - resets = <&ccu RST_DE_BE0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - - be0_in_fe1: endpoint@1 { - reg = <1>; - remote-endpoint = <&fe1_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - - be0_out_tcon1: endpoint@1 { - reg = <1>; - remote-endpoint = <&tcon1_in_be0>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 42601017127..6e4a2091401 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -287,6 +287,7 @@ config MACH_SUN4I select SUPPORT_SPL imply SPL_SYS_I2C_LEGACY imply SYS_I2C_LEGACY + imply OF_UPSTREAM config MACH_SUN5I bool "sun5i (Allwinner A13)" diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 57e91d0f017..96e3d19038b 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-olinuxino-lime" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig index 02b3e69584f..40f52d1a8d3 100644 --- a/configs/Chuwi_V7_CW0825_defconfig +++ b/configs/Chuwi_V7_CW0825_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-chuwi-v7-cw0825" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-chuwi-v7-cw0825" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index ab3f65ad667..9fc57c23f43 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-cubieboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig index 482e0fb7a83..541f98db9e1 100644 --- a/configs/Hyundai_A7HD_defconfig +++ b/configs/Hyundai_A7HD_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-hyundai-a7hd" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-hyundai-a7hd" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_EMR1=4 diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig index 49dcfa098ee..0e1a7780c3d 100644 --- a/configs/Linksprite_pcDuino_defconfig +++ b/configs/Linksprite_pcDuino_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pcduino" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB1_VBUS_PIN="" diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig index 3c5312d8824..c7608ed0fdc 100644 --- a/configs/Marsboard_A10_defconfig +++ b/configs/Marsboard_A10_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-marsboard" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_AHCI=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index 9ac2e4839d9..93e73ebe3f1 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-a1000" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_VIDEO_VGA=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index e8bc1485766..e64352b4b6a 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mini-xplus" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index b89dd8ea62b..c76f36ec37e 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-ba10-tvbox" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=384 diff --git a/configs/dserve_dsrv9703c_defconfig b/configs/dserve_dsrv9703c_defconfig index f5ff69d7d63..06a79c935d7 100644 --- a/configs/dserve_dsrv9703c_defconfig +++ b/configs/dserve_dsrv9703c_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-dserve-dsrv9703c" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-dserve-dsrv9703c" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig index 5cc1a1d57f4..5ab210b345b 100644 --- a/configs/iNet_3F_defconfig +++ b/configs/iNet_3F_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3f" +# CONFIG_OF_UPSTREAM is not set CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig index 38b20109a57..415575cc228 100644 --- a/configs/iNet_3W_defconfig +++ b/configs/iNet_3W_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet-3w" +# CONFIG_OF_UPSTREAM is not set CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/inet1_defconfig b/configs/inet1_defconfig index f81120b1197..68a6df50e42 100644 --- a/configs/inet1_defconfig +++ b/configs/inet1_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet1" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/inet97fv2_defconfig b/configs/inet97fv2_defconfig index d5d2dc32c93..a5414e2c502 100644 --- a/configs/inet97fv2_defconfig +++ b/configs/inet97fv2_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet97fv2" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet97fv2" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/inet9f_rev03_defconfig b/configs/inet9f_rev03_defconfig index 4485f930236..5b0cda10f3b 100644 --- a/configs/inet9f_rev03_defconfig +++ b/configs/inet9f_rev03_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-inet9f-rev03" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=408 diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index c99be7cea4e..b41c2cf3c05 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-jesurun-q5" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=312 diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig index 416565e5af2..8ebd5e9cbc3 100644 --- a/configs/mk802_defconfig +++ b/configs/mk802_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_USB2_VBUS_PIN="PH12" diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig index 965a9cd5c4b..c56a4c7c6a0 100644 --- a/configs/mk802ii_defconfig +++ b/configs/mk802ii_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-mk802ii" CONFIG_SPL=y CONFIG_MACH_SUN4I=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/pov_protab2_ips9_defconfig b/configs/pov_protab2_ips9_defconfig index a62c9f8fa37..330c97fd6dc 100644 --- a/configs/pov_protab2_ips9_defconfig +++ b/configs/pov_protab2_ips9_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pov-protab2-ips9" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-pov-protab2-ips9" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig index 3fee7c2e50c..4f3d0ec7443 100644 --- a/configs/sunxi_Gemei_G9_defconfig +++ b/configs/sunxi_Gemei_G9_defconfig @@ -1,6 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y -CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9" +CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun4i-a10-gemei-g9" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=432 -- 2.42.0