]> Git Repo - J-u-boot.git/log
J-u-boot.git
17 years agoTQM8xx: Fix CAN timing.
Jens Gehrlein [Wed, 26 Sep 2007 15:55:54 +0000 (17:55 +0200)]
TQM8xx: Fix CAN timing.

Signed-off-by: Martin Krause <[email protected]>
17 years agoTQM866M: fix SDRAM refresh
Martin Krause [Thu, 27 Sep 2007 12:54:36 +0000 (14:54 +0200)]
TQM866M: fix SDRAM refresh

At 133 MHz the current SDRAM refresh rate is too fast
(measured 4 * 1.17 us).
CFG_MAMR_PTA changes from 39 to 97. This result
in a refresh rate of 4 * 7.8 us at the default clock
50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
This is a compromise until a new method is found to
adjust the refresh rate.

Signed-off-by: Martin Krause <[email protected]>
17 years agoTQM866M: adjust for doubled flash sector size.
Martin Krause [Wed, 26 Sep 2007 15:55:55 +0000 (17:55 +0200)]
TQM866M: adjust for doubled flash sector size.

Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
doubled sector size.

Signed-off-by: Martin Krause <[email protected]>
17 years ago[FIX] XUPV2P change command handling
Michal Simek [Sun, 14 Oct 2007 14:12:29 +0000 (16:12 +0200)]
[FIX] XUPV2P change command handling
and remove code violation

17 years agoMerge git://www.denx.de/git/u-boot
Michal Simek [Sun, 14 Oct 2007 12:33:32 +0000 (14:33 +0200)]
Merge git://www.denx.de/git/u-boot

17 years agoMerge ../master/
Michal Simek [Sun, 14 Oct 2007 12:31:47 +0000 (14:31 +0200)]
Merge ../master/

17 years agoPrepare for 1.3.0-rc3 release v1.3.0-rc3
Wolfgang Denk [Sat, 13 Oct 2007 22:13:19 +0000 (00:13 +0200)]
Prepare for 1.3.0-rc3 release

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoFix warning differ in signedness in cpu/pxa/mmc.c
Jean-Christophe PLAGNIOL-VILLARD [Sat, 29 Sep 2007 11:41:37 +0000 (13:41 +0200)]
Fix warning differ in signedness in cpu/pxa/mmc.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
17 years agoFix warning differ in signedness in board/mpl/vcma9/vcma9.c
Wolfgang Denk [Sat, 13 Oct 2007 21:51:14 +0000 (23:51 +0200)]
Fix warning differ in signedness in board/mpl/vcma9/vcma9.c

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-avr32
Wolfgang Denk [Sat, 13 Oct 2007 21:01:27 +0000 (23:01 +0200)]
Merge branch 'master' of git://www.denx.de/git/u-boot-avr32

17 years agoMerge branch 'merge' of git://www.denx.de/git/u-boot-microblaze
Wolfgang Denk [Sat, 13 Oct 2007 20:57:43 +0000 (22:57 +0200)]
Merge branch 'merge' of git://www.denx.de/git/u-boot-microblaze

17 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-microblaze
Wolfgang Denk [Sat, 13 Oct 2007 19:50:12 +0000 (21:50 +0200)]
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

17 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-nand-flash
Wolfgang Denk [Sat, 13 Oct 2007 19:40:23 +0000 (21:40 +0200)]
Merge branch 'master' of git://www.denx.de/git/u-boot-nand-flash

17 years agoCoding Style cleanup.
Wolfgang Denk [Sat, 13 Oct 2007 19:15:39 +0000 (21:15 +0200)]
Coding Style cleanup.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-arm
Wolfgang Denk [Sat, 13 Oct 2007 16:48:23 +0000 (18:48 +0200)]
Merge branch 'master' of git://www.denx.de/git/u-boot-arm

17 years agoGP3 SSA: enable RTC
Wolfgang Denk [Fri, 12 Oct 2007 13:49:39 +0000 (15:49 +0200)]
GP3 SSA: enable RTC

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMerge branch 'master' of /.automount/castor-vlab/root/home/wd/git/u-boot/master/
Wolfgang Denk [Wed, 10 Oct 2007 14:39:09 +0000 (16:39 +0200)]
Merge branch 'master' of /.automount/castor-vlab/root/home/wd/git/u-boot/master/

17 years agoMerge branch 'hellrosa_i2c' of /home/gjb/git/u-boot
Wolfgang Denk [Wed, 10 Oct 2007 14:31:06 +0000 (16:31 +0200)]
Merge branch 'hellrosa_i2c' of /home/gjb/git/u-boot

17 years agoMerge branch 'tqm5200_default_env' of /home/tur/git/u-boot
Wolfgang Denk [Wed, 10 Oct 2007 14:23:23 +0000 (16:23 +0200)]
Merge branch 'tqm5200_default_env' of /home/tur/git/u-boot

17 years ago[ads5121] EEPROM support added.
Grzegorz Bernacki [Tue, 9 Oct 2007 11:58:24 +0000 (13:58 +0200)]
[ads5121] EEPROM support added.

Signed-off-by: Grzegorz Bernacki <[email protected]>
17 years agoAVR32: Initialize bi_flash* in board_init_r
Haavard Skinnemoen [Sat, 6 Oct 2007 16:55:35 +0000 (18:55 +0200)]
AVR32: Initialize bi_flash* in board_init_r

The ATSTK1000-specific flash driver intializes bi_flashstart,
bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
driver, don't.

Initialize these in board_init_r instead so that things will still be
set up correctly when we switch to the CFI driver.

Signed-off-by: Haavard Skinnemoen <[email protected]>
17 years agotqm5200: Fix CONFIG_CMD_PCI typo in board config file.
Marian Balakowicz [Fri, 5 Oct 2007 08:40:54 +0000 (10:40 +0200)]
tqm5200: Fix CONFIG_CMD_PCI typo in board config file.

Signed-off-by: Marian Balakowicz <[email protected]>
17 years agoCM5200: Fix missing null-termination in hostname manipulation code
Bartlomiej Sieka [Fri, 5 Oct 2007 07:46:06 +0000 (09:46 +0200)]
CM5200: Fix missing null-termination in hostname manipulation code

Signed-off-by: Bartlomiej Sieka <[email protected]>
17 years agoMerge with git://www.denx.de/git/u-boot.git
Peter Pearse [Thu, 4 Oct 2007 10:00:44 +0000 (11:00 +0100)]
Merge with git://www.denx.de/git/u-boot.git

17 years agoFix memtest breakage
Haavard Skinnemoen [Tue, 2 Oct 2007 17:09:01 +0000 (19:09 +0200)]
Fix memtest breakage

CFG_MEMTEST_START uses weird magic involving gd, which fails to
compile. Use hardcoded values instead (we actually know how much RAM
we have on board.)

Signed-off-by: Haavard Skinnemoen <[email protected]>
17 years agoMerge commit 'origin/master'
Haavard Skinnemoen [Tue, 2 Oct 2007 17:05:53 +0000 (19:05 +0200)]
Merge commit 'origin/master'

17 years agoMerge with git://www.denx.de/git/u-boot.git
Stefan Roese [Tue, 2 Oct 2007 09:47:13 +0000 (11:47 +0200)]
Merge with git://www.denx.de/git/u-boot.git

17 years agoppc4xx: Coding style cleanup
Stefan Roese [Tue, 2 Oct 2007 09:44:46 +0000 (11:44 +0200)]
ppc4xx: Coding style cleanup

Signed-off-by: Stefan Roese <[email protected]>
17 years agoppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
Stefan Roese [Tue, 2 Oct 2007 09:44:19 +0000 (11:44 +0200)]
ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet

Signed-off-by: Stefan Roese <[email protected]>
17 years agoProgram EPLD to force full duplex mode for PHY.
Grzegorz Bernacki [Mon, 1 Oct 2007 07:51:50 +0000 (09:51 +0200)]
Program EPLD to force full duplex mode for PHY.

EPLD forces modes of PHY operation. By default full duplex is turned off.
This fix turns it on.

Signed-off-by: Grzegorz Bernacki <[email protected]>
17 years agoBugfix: Use only one PTD for one endpoint
Timo Ketola [Mon, 24 Sep 2007 11:50:32 +0000 (14:50 +0300)]
Bugfix: Use only one PTD for one endpoint

Original isp116x-hcd code prepared multiple PTDs for longer than 16
byte transfers for one endpoint. That is unnecessary because the
ISP116x is able to split long data from one PTD into multiple
transactions based on the buffer size of the endpoint. It also caused
serious problems if the endpoint NAKed some of the transactions. In
that case ISP116x wouldn't notice that the other PTDs were for the same
endpoint and would try the other PTDs possibly out of order. That would
break the whole transfer.

This patch makes isp116x_submit_job to use one PTD for one transfer.

Signed-off-by: Timo Ketola <[email protected]>
Signed-off-by: Markus Klotzbuecher <[email protected]>
17 years agoFix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
Jean-Christophe PLAGNIOL-VILLARD [Thu, 27 Sep 2007 21:27:47 +0000 (23:27 +0200)]
Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
17 years agoMerge branch 'master' of /home/stefan/git/u-boot/lwmon5
Stefan Roese [Thu, 27 Sep 2007 11:48:24 +0000 (13:48 +0200)]
Merge branch 'master' of /home/stefan/git/u-boot/lwmon5

17 years agoppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
Stefan Roese [Tue, 11 Sep 2007 12:12:55 +0000 (14:12 +0200)]
ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)

Signed-off-by: Stefan Roese <[email protected]>
17 years agoMerge with git+ssh://gemini_vpn/home/wd/git/u-boot/master
Wolfgang Denk [Tue, 25 Sep 2007 22:13:14 +0000 (00:13 +0200)]
Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master

17 years agoFpga: fix incorrect test of CFG_FPGA_XILINX macro
Grant Likely [Tue, 25 Sep 2007 21:48:05 +0000 (15:48 -0600)]
Fpga: fix incorrect test of CFG_FPGA_XILINX macro

CFG_FPGA_XILINX is a bit value used to test against the value in
CONFIG_FPGA.  Testing for a value will always return TRUE.  I don't
think that is the intention in this code.

Signed-off-by: Grant Likely <[email protected]>
17 years agoMerge branch 'master' of git://www.denx.de/git/u-boot
Kim Phillips [Mon, 24 Sep 2007 19:43:43 +0000 (14:43 -0500)]
Merge branch 'master' of git://www.denx.de/git/u-boot

17 years ago[FIX] change command handling and removing code violation
Michal Simek [Sun, 23 Sep 2007 22:41:30 +0000 (00:41 +0200)]
[FIX] change command handling and removing code violation

17 years ago[FIX] change sets of commands
Michal Simek [Sun, 23 Sep 2007 22:36:06 +0000 (00:36 +0200)]
[FIX] change sets of commands
because changing of command handling brings
compilation problems

17 years ago[FIX] Email reparation & Copyright
Michal Simek [Sun, 23 Sep 2007 22:30:42 +0000 (00:30 +0200)]
[FIX] Email reparation & Copyright
Both codes are written by myself without any
support from CTU

17 years ago[PATCH] Change macro name for UartLite
Michal Simek [Sun, 23 Sep 2007 22:25:11 +0000 (00:25 +0200)]
[PATCH] Change macro name for UartLite
because PowerPC 405 can use UartLite as console

17 years ago[PATCH] Add support for design without interrupt controller
Michal Simek [Sun, 23 Sep 2007 22:21:19 +0000 (00:21 +0200)]
[PATCH] Add support for design without interrupt controller
Polling timer

17 years ago[FIX] resolve problem with cpu without barrel shifter
Michal Simek [Sun, 23 Sep 2007 22:19:48 +0000 (00:19 +0200)]
[FIX] resolve problem with cpu without barrel shifter

17 years ago[FIX] repair email address
Michal Simek [Sun, 23 Sep 2007 22:18:46 +0000 (00:18 +0200)]
[FIX] repair email address

17 years ago[FIX] repair MFSL commands
Michal Simek [Sun, 23 Sep 2007 22:17:42 +0000 (00:17 +0200)]
[FIX] repair MFSL commands

17 years agosynchronizition with mainline
Michal Simek [Sun, 23 Sep 2007 22:08:37 +0000 (00:08 +0200)]
synchronizition with mainline

17 years agoMerge ../u-boot
Michal Simek [Sun, 23 Sep 2007 22:04:22 +0000 (00:04 +0200)]
Merge ../u-boot

17 years agoMerge with /home/wd/git/u-boot/custodian/u-boot-usb
Wolfgang Denk [Sat, 22 Sep 2007 22:47:01 +0000 (00:47 +0200)]
Merge with /home/wd/git/u-boot/custodian/u-boot-usb

17 years agov1.3.0-rc2 v1.3.0-rc2
Wolfgang Denk [Wed, 19 Sep 2007 22:04:14 +0000 (00:04 +0200)]
v1.3.0-rc2

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMerge with git+ssh://gemini_vpn/home/wd/git/u-boot/master
Wolfgang Denk [Tue, 18 Sep 2007 19:39:39 +0000 (21:39 +0200)]
Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master

17 years agoAvoid compiler warning.
Wolfgang Denk [Tue, 18 Sep 2007 19:36:35 +0000 (21:36 +0200)]
Avoid compiler warning.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoBugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
Grant Likely [Tue, 18 Sep 2007 18:24:57 +0000 (12:24 -0600)]
Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config

/bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
nulls in a string differently.  For example, the following statement:
    echo "this is a string\0" > afile
Will produce the following with /bin/bash:
    "this is a string\0"
But with /bin/dash, will produce:
    "this is a string

Bug fixed by moving the embedded null out of the makefile and into the
config header.  Also renamed the macro to avoid usage colision with the same
macro used by other board ports.

Signed-off-by: Grant Likely <[email protected]>
17 years agoMCC200: fix build warning
Wolfgang Denk [Tue, 18 Sep 2007 15:40:27 +0000 (17:40 +0200)]
MCC200: fix build warning

The MCC200 board config file includes version.h for some customer-
specific setting, which causes warnings with "make depend"; build
version.h before depend.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMove coloured led API to status_led.h
Peter Pearse [Tue, 18 Sep 2007 12:07:54 +0000 (13:07 +0100)]
Move coloured led API to status_led.h
Improve indentation in drivers/at45.c

17 years agoMerge with git://www.denx.de/git/u-boot.git
Peter Pearse [Tue, 18 Sep 2007 10:12:58 +0000 (11:12 +0100)]
Merge with git://www.denx.de/git/u-boot.git

17 years agoUpdate atstk1002 bootargs.
Eirik Aanonsen [Tue, 18 Sep 2007 06:47:20 +0000 (08:47 +0200)]
Update atstk1002 bootargs.

Updates to atstk1002 U-Boot header file:
- Changed bootargs:
    * Set the bootargs for at1002 to point to the SD-card partition instead
    * ... of the boot flash.
    * Removing the rootfstype since that argument are not needed.

Signed-off-by: Eirik Aanonsen <[email protected]>
Signed-off-by: Haavard Skinnemoen <[email protected]>
17 years agoAdd some comments to clocks in atstk1002.h
Eirik Aanonsen [Wed, 12 Sep 2007 11:32:37 +0000 (13:32 +0200)]
Add some comments to clocks in atstk1002.h

This patch applies some clarifying comments to how the different
clocks are setup according to atstk1002.h Some of the previous
comments where stating wrongful information.

Signed-off-by: Haavard Skinnemoen <[email protected]>
17 years agoMerge with git://www.denx.de/git/u-boot.git
Markus Klotzbuecher [Mon, 17 Sep 2007 15:12:45 +0000 (17:12 +0200)]
Merge with git://www.denx.de/git/u-boot.git

17 years agoDescription: Add NEC's PCI OHCI module ID to the USB OHCI driver
David Saada [Mon, 17 Sep 2007 15:04:47 +0000 (17:04 +0200)]
Description: Add NEC's PCI OHCI module ID to the USB OHCI driver

Signed-off-by: David Saada <[email protected]>
17 years agoSmall whitespace cleanup of OneNAND patch
Stefan Roese [Mon, 17 Sep 2007 06:20:47 +0000 (08:20 +0200)]
Small whitespace cleanup of OneNAND patch

Signed-off-by: Stefan Roese <[email protected]>
17 years agoOneNAND support (take #2)
Kyungmin Park [Mon, 10 Sep 2007 08:15:14 +0000 (17:15 +0900)]
OneNAND support (take #2)

[PATCH 3/3] OneNAND support (take #2)

OneNAND support at U-Boot

Signed-off-by: Kyungmin Park <[email protected]>
17 years agoOneNAND support (take #2)
Kyungmin Park [Mon, 10 Sep 2007 08:14:34 +0000 (17:14 +0900)]
OneNAND support (take #2)

[PATCH 2/3] OneNAND support (take #2)

OneNAND support at U-Boot

Signed-off-by: Kyungmin Park <[email protected]>
17 years agoOneNAND support (take #2)
Kyungmin Park [Mon, 10 Sep 2007 08:13:49 +0000 (17:13 +0900)]
OneNAND support (take #2)

[PATCH 1/3] OneNAND support (take #2)

OneNAND support at U-Boot

Signed-off-by: Kyungmin Park <[email protected]>
17 years ago[FIX] remove files form repository
Michal Simek [Sun, 16 Sep 2007 18:51:57 +0000 (20:51 +0200)]
[FIX] remove files form repository

17 years agoMerge branch 'master' of /home/uboot/070912/u-boot-microblaze/
Michal Simek [Sun, 16 Sep 2007 18:32:10 +0000 (20:32 +0200)]
Merge branch 'master' of /home/uboot/070912/u-boot-microblaze/

17 years agoMerge ../u-boot
Michal Simek [Sun, 16 Sep 2007 17:42:42 +0000 (19:42 +0200)]
Merge ../u-boot

17 years agoTQM8xx[LM]: Fix broken environment alignment.
Wolfgang Denk [Sun, 16 Sep 2007 15:10:04 +0000 (17:10 +0200)]
TQM8xx[LM]: Fix broken environment alignment.

With recent toolchains, the environment sectors were no longer aligned to
sector boundaries. The reason was a combination of two bugs:

1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
   for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
   this gets defined, is not included here (and cannot be included
   without causing lots of problems).

   Added a new #define CFG_USE_PPCENV for all boards which really
   want to put the environment is a ".ppcenv" section.

2) The linker scripts just include environment.o, silently assuming
   that the objects in that file are really in the order in which
   they are coded in the C file, i. e. "environment" first, then
   "redundand_environment", and "env_size" last. However, current
   toolchains (GCC-4.x) reorder the objects, causing the environment
   data not to start on a flash sector boundary:

   Instead of: we got:

40008000 T environment 40008000 T env_size
4000c000 T redundand_environment 40008004 T redundand_environment
40010000 T env_size 4000c004 T environment

   Note: this patch fixes just the first part, and cures the alignment
   problem by making sure that "env_size" gets placed correctly. However,
   we still have a potential issue because primary and redundant
   environment sectors are actually swapped, i. e. we have now:

40008000 T redundand_environment
4000c000 T environment
40010000 T env_size

   This shall be fixed in the next version.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoTQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
Wolfgang Denk [Sun, 16 Sep 2007 00:39:35 +0000 (02:39 +0200)]
TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoTypo fix in tsec.c
[email protected] [Mon, 10 Sep 2007 18:54:56 +0000 (14:54 -0400)]
Typo fix in tsec.c

Fixup for the break statement in wrong place.

[Patch by [email protected]]
Acked-by: Andy Fleming <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>

17 years agoFix do_div() usage in nand process output
Matthias Fuchs [Tue, 11 Sep 2007 15:04:00 +0000 (17:04 +0200)]
Fix do_div() usage in nand process output

Fix usage of do_div() in nand erase|read|write process output.

The last patch to nand_util.c introduced do_div() instead of libgcc's
implementation. But do_div() returns the quotient in its first
macro parameter and not as result.

Signed-off-by: Matthias Fuchs <[email protected]>
17 years agoNAND: Add CFG_NAND_QUIET option
Matthias Fuchs [Wed, 12 Sep 2007 10:36:53 +0000 (12:36 +0200)]
NAND: Add CFG_NAND_QUIET option

This config option sets the default for the progress information
output behavior that can also be configured through the 'quiet'
environment variable.

The legacy NAND code does not print the current progress info
on the console. So this option is for backward compatibility for
units that are in the field and where setting the quiet variable
is not an option. With CFG_NAND_QUIET set to '1' the console
progress info is turned off. This can still be overwritten
through the environment variable.

Signed-off-by: Matthias Fuchs <[email protected]>
17 years agoColdFire: fix build error becasue of bad type of mii_init()
Liew Tsi Chung-r5aahp [Thu, 13 Sep 2007 23:06:05 +0000 (16:06 -0700)]
ColdFire: fix build error becasue of bad type of mii_init()

Signed-off-by: TsiChungLiew <[email protected]>
17 years agoColdFire: Fix build error caused by pixis.c
Liew Tsi Chung-r5aahp [Thu, 13 Sep 2007 23:04:05 +0000 (16:04 -0700)]
ColdFire: Fix build error caused by pixis.c

Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.

Signed-off-by: TsiChungLiew <[email protected]>
17 years agoUpdate MPC8349ITX*_config to place config.tmp in right place.
Sam Sparks [Fri, 14 Sep 2007 17:14:42 +0000 (11:14 -0600)]
Update MPC8349ITX*_config to place config.tmp in right place.

MPC834ITX*_config does not store config.tmp at the correct locatation,
causing MPC8349ITXGP to have the wrong TEXT_BASE.

Signed-off-by: Sam Sparks <[email protected]>
Signed-off-by: Grant Likely <[email protected]>
17 years agoFix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
Wolfgang Denk [Sat, 15 Sep 2007 18:48:41 +0000 (20:48 +0200)]
Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoMake DECLARE_GLOBAL_DATA_PTR global for DaVinci
Dirk Behme [Sat, 15 Sep 2007 09:55:42 +0000 (11:55 +0200)]
Make DECLARE_GLOBAL_DATA_PTR global for DaVinci

As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
function local.

Signed-off-by: Dirk Behme <[email protected]>
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805

17 years agoSynchronize with U-BOOT mainline
Michal Simek [Fri, 14 Sep 2007 22:03:35 +0000 (00:03 +0200)]
Synchronize with U-BOOT mainline

17 years agoMerge ../u-boot
Michal Simek [Fri, 14 Sep 2007 22:01:53 +0000 (00:01 +0200)]
Merge ../u-boot

17 years agoUpdate MPC8349ITX*_config to place config.tmp in right place.
Sam Sparks [Fri, 14 Sep 2007 17:14:42 +0000 (11:14 -0600)]
Update MPC8349ITX*_config to place config.tmp in right place.

MPC834ITX*_config does not store config.tmp at the correct locatation,
causing MPC8349ITXGP to have the wrong TEXT_BASE.

Signed-off-by: Sam Sparks <[email protected]>
Signed-off-by: Grant Likely <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
17 years agocm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
Bartlomiej Sieka [Thu, 13 Sep 2007 16:21:48 +0000 (18:21 +0200)]
cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9

Signed-off-by: Marian Balakowicz <[email protected]>
17 years agotqm5200: Restore customary env. variable boot commands for powerpc kernels
Bartlomiej Sieka [Thu, 13 Sep 2007 14:33:59 +0000 (16:33 +0200)]
tqm5200: Restore customary env. variable boot commands for powerpc kernels

- update default definitions of kernel_addr and fdt_addr env. variables
- make arch/powerpc booting the default scenario
- update MTD partition layout to match the above

Signed-off-by: Bartlomiej Sieka <[email protected]>
17 years agoFix memory corruption problem on STX GP3 SSA Board.
Wolfgang Denk [Tue, 11 Sep 2007 22:48:57 +0000 (00:48 +0200)]
Fix memory corruption problem on STX GP3 SSA Board.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoFinal tidy
Peter Pearse [Tue, 11 Sep 2007 14:35:01 +0000 (15:35 +0100)]
Final tidy

17 years agoMerge with git://www.denx.de/git/u-boot.git
Peter Pearse [Tue, 11 Sep 2007 14:31:55 +0000 (15:31 +0100)]
Merge with git://www.denx.de/git/u-boot.git

17 years ago[GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
Grzegorz Bernacki [Tue, 11 Sep 2007 13:42:11 +0000 (15:42 +0200)]
[GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
scan on second pci bus.

Signed-off-by: Grzegorz Bernacki <[email protected]>
17 years agoMerge with git://www.denx.de/git/u-boot.git
Peter Pearse [Tue, 11 Sep 2007 13:26:23 +0000 (14:26 +0100)]
Merge with git://www.denx.de/git/u-boot.git

17 years ago[ppc4xx] Individual handling of sdram.c for bamboo_nand build
Grzegorz Bernacki [Tue, 11 Sep 2007 10:57:52 +0000 (12:57 +0200)]
[ppc4xx] Individual handling of sdram.c for bamboo_nand build

Bamboo has a file sdram.c which needs special treatment when building in
separate directory. It has to be linked to build directory otherwise it is
not seen.

Signed-off-by: Grzegorz Bernacki <[email protected]>
17 years ago[FIX] Microblaze ML401 - repare FLASH handling
Michal Simek [Mon, 10 Sep 2007 22:37:04 +0000 (00:37 +0200)]
[FIX] Microblaze ML401 - repare FLASH handling

17 years agoMerge git://www.denx.de/git/u-boot
Michal Simek [Mon, 10 Sep 2007 22:29:27 +0000 (00:29 +0200)]
Merge git://www.denx.de/git/u-boot

17 years agoMerge with /home/raj/git/u-boot#ads5121_fec_optimize
Wolfgang Denk [Mon, 10 Sep 2007 21:21:16 +0000 (23:21 +0200)]
Merge with /home/raj/git/u-boot#ads5121_fec_optimize

17 years agoAllocate CPU Architecture Code for STMicroelectronics' ST200.
Sean MCGOOGAN [Mon, 10 Sep 2007 15:55:59 +0000 (16:55 +0100)]
Allocate CPU Architecture Code for STMicroelectronics' ST200.

Signed-off-by: Sean McGoogan <[email protected]>
---------------------------------------------------

17 years agoUpdate version to match current state.
Wolfgang Denk [Mon, 10 Sep 2007 18:42:31 +0000 (20:42 +0200)]
Update version to match current state.

Signed-off-by: Wolfgang Denk <[email protected]>
17 years ago[MPC512x] Streamline frame handling in the FEC driver
Grzegorz Bernacki [Mon, 10 Sep 2007 15:39:08 +0000 (17:39 +0200)]
[MPC512x] Streamline frame handling in the FEC driver

- convert frame size settings to be derived from a single base
- set frame size to the recommended default value

Signed-off-by: Grzegorz Bernacki <[email protected]>
17 years agoMerge with git://www.denx.de/git/u-boot.git
Peter Pearse [Mon, 10 Sep 2007 09:11:15 +0000 (10:11 +0100)]
Merge with git://www.denx.de/git/u-boot.git

17 years agoRemove compiler warning: target CPU does not support interworking
Kyungmin Park [Mon, 10 Sep 2007 02:34:00 +0000 (11:34 +0900)]
Remove compiler warning: target CPU does not support interworking

Signed-off-by: Kyungmin Park <[email protected]>
17 years agoFix compile error in spc1920 config.
Wolfgang Denk [Sun, 9 Sep 2007 19:21:33 +0000 (21:21 +0200)]
Fix compile error in spc1920 config.

Signed-off-by: Markus Klotzbücher <[email protected]>
Signed-off-by: Wolfgang Denk <[email protected]>
17 years agoBugfix: make bootm+libfdt compile on boards with no flash
Grant Likely [Fri, 7 Sep 2007 15:25:07 +0000 (09:25 -0600)]
Bugfix: make bootm+libfdt compile on boards with no flash

Signed-off-by: Grant Likely <[email protected]>
17 years agoMerge with /home/raj/git/u-boot#440SPe_PCIe_fixes
Wolfgang Denk [Sat, 8 Sep 2007 18:52:57 +0000 (20:52 +0200)]
Merge with /home/raj/git/u-boot#440SPe_PCIe_fixes

17 years agoMerge with /home/raj/git/u-boot#ads5121_fixes
Wolfgang Denk [Sat, 8 Sep 2007 18:45:59 +0000 (20:45 +0200)]
Merge with /home/raj/git/u-boot#ads5121_fixes

17 years ago[PPC440SPe] PCIe environment settings for Katmai and Yucca
Grzegorz Bernacki [Fri, 7 Sep 2007 16:35:37 +0000 (18:35 +0200)]
[PPC440SPe] PCIe environment settings for Katmai and Yucca

- 'pciconfighost' is set by default in order to be able to scan bridges
behind the primary host/PCIe

- 'pciscandelay' env variable is recognized to allow for user-controlled
delay before the PCIe bus enumeration; some peripheral devices require a
significant delay before they can be scanned (e.g. LSI8408E); without the
delay they are not detected

Signed-off-by: Grzegorz Bernacki <[email protected]>
This page took 0.079445 seconds and 4 git commands to generate.