X-Git-Url: https://repo.jachan.dev/J-u-boot.git/blobdiff_plain/b9c9ce8a4064c8d88f714604db856cf1cd2b40b5..ad09ccf7fea365e380d7c7c74e9b87b4c09f30ce:/configs/at91sam9g10ek_nandflash_defconfig

diff --git a/configs/at91sam9g10ek_nandflash_defconfig b/configs/at91sam9g10ek_nandflash_defconfig
index 293683cec9c..580960e8181 100644
--- a/configs/at91sam9g10ek_nandflash_defconfig
+++ b/configs/at91sam9g10ek_nandflash_defconfig
@@ -1,27 +1,31 @@
 CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x21f00000
+CONFIG_TEXT_BASE=0x21f00000
 CONFIG_SYS_MALLOC_LEN=0x80000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_AT91SAM9261EK=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_AT91SAM9G10=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
-CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART_BASE=0xfffff200
 CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x100000
 CONFIG_DEBUG_UART=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH"
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x300000; bootm"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_RESET_PHY_R=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
@@ -29,6 +33,7 @@ CONFIG_SYS_PROMPT="U-Boot> "
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
@@ -36,13 +41,12 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
+CONFIG_NET_RETRY_COUNT=20
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
@@ -55,3 +59,5 @@ CONFIG_ATMEL_USART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_USB=y
+CONFIG_SYS_USB_OHCI_SLOT_NAME="at91sam9261"
+CONFIG_USB_ATMEL=y