X-Git-Url: https://repo.jachan.dev/J-u-boot.git/blobdiff_plain/612f2dc026548466adf55268b9faaea108b15ec8..552a848e4f75e224515269a84a1155c84b762bc7:/board/boundary/nitrogen6x/nitrogen6x.c

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index e8ea256be0c..17fd6f56eaf 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -13,14 +13,14 @@
 #include <asm/arch/sys_proto.h>
 #include <malloc.h>
 #include <asm/arch/mx6-pins.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/sata.h>
-#include <asm/imx-common/spi.h>
-#include <asm/imx-common/boot_mode.h>
-#include <asm/imx-common/video.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/sata.h>
+#include <asm/mach-imx/spi.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/video.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <micrel.h>
@@ -31,7 +31,7 @@
 #include <i2c.h>
 #include <input.h>
 #include <netdev.h>
-#include <usb/ehci-fsl.h>
+#include <usb/ehci-ci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 #define GP_USB_OTG_PWR	IMX_GPIO_NR(3, 22)
@@ -387,20 +387,17 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_FEC_MXC
 	bus = fec_get_miibus(base, -1);
 	if (!bus)
-		return 0;
+		return -EINVAL;
 	/* scan phy 4,5,6,7 */
 	phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
 	if (!phydev) {
-		free(bus);
-		return 0;
+		ret = -EINVAL;
+		goto free_bus;
 	}
 	printf("using phy at %d\n", phydev->addr);
 	ret  = fec_probe(bis, -1, base, bus, phydev);
-	if (ret) {
-		printf("FEC MXC: %s:failed\n", __func__);
-		free(phydev);
-		free(bus);
-	}
+	if (ret)
+		goto free_phydev;
 #endif
 
 #ifdef CONFIG_CI_UDC
@@ -408,6 +405,12 @@ int board_eth_init(bd_t *bis)
 	usb_eth_initialize(bis);
 #endif
 	return 0;
+
+free_phydev:
+	free(phydev);
+free_bus:
+	free(bus);
+	return ret;
 }
 
 static void setup_buttons(void)
@@ -900,7 +903,7 @@ int board_init(void)
 	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
 	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
 
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
 	setup_sata();
 #endif
 
@@ -1018,5 +1021,6 @@ int misc_init_r(void)
 #ifdef CONFIG_CMD_BMODE
 	add_board_boot_modes(board_boot_modes);
 #endif
+	setenv_hex("reset_cause", get_imx_reset_cause());
 	return 0;
 }