Convert CONFIG_PHYLIB et al to Kconfig

[J-u-boot.git] / include / configs / vinco.h

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index e4020d00ce03305092dc5e6878eb19deed027e56..83ec78dc4315c9f3bf524bb13a4faca5d7834f38 100644 (file)
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the VInCo platform.
  *
@@ -6,8 +7,6 @@
  *                   Bo Shen <voice.shen@atmel.com>
  * Copyright (C) 2015 Free Electrons
  *                   Gregory CLEMENT gregory.clement@free-electrons.com
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,19 +15,17 @@
 #include "at91-sama5_common.h"
 
 /* The value in the common file is too far away for the VInCo platform */
-#ifdef CONFIG_SYS_TEXT_BASE
-#undef CONFIG_SYS_TEXT_BASE
-#endif
-#define CONFIG_SYS_TEXT_BASE           0x20f00000
 
 /* serial console */
 #define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_USART3
-#define        CONFIG_USART_ID                 ATMEL_ID_USART3
+#define CONFIG_USART_BASE              0xfc00c000
+#define CONFIG_USART_ID                        30
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER       0xfc06863c
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x4000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -39,56 +36,32 @@
 /* SerialFlash */
 
 #ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI
 #define CONFIG_ATMEL_SPI0
 #define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                50000000
-#define CONFIG_ENV_SPI_MAX_HZ          50000000
-#define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
-#define CONFIG_ENV_SPI_MODE            (SPI_MODE_0)
 #endif
 
 /* MMC */
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI                        ATMEL_BASE_MCI1
+#define ATMEL_BASE_MMCI                        0xfc000000
 #define CONFIG_SYS_MMC_CLK_OD          500000
 
 /* For generating MMC partitions */
-#define CONFIG_RANDOM_UUID
 
 #endif
 
 /* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
 
 /* Ethernet Hardware */
-#define CONFIG_PHY_SMSC
 #define CONFIG_MACB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_MACB_SEARCH_PHY
 
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
+#ifdef CONFIG_SPI_BOOT
 /* bootstrap + u-boot + env + linux in serial flash */
-#define CONFIG_ENV_SPI_BUS     CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS      CONFIG_SF_DEFAULT_CS
 /* Use our own mapping for the VInCo platform */
-#undef CONFIG_ENV_OFFSET
-#undef CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OFFSET       0x10000
-#define CONFIG_ENV_SIZE         0x10000
 
 /* Update the bootcommand according to our mapping for the VInCo platform */
 #undef CONFIG_BOOTCOMMAND