Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to Kconfig

[J-u-boot.git] / include / configs / pm9g45.h

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index 03a25c8230b7190f57b82f89a1e7d1de26f3f7f5..e11c67fc1c85acbcdcf4baaabb3bcdda46410dfb 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -25,7 +25,6 @@
 #define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
 #define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9G45"
 
-#define MACH_TYPE_PM9G45       2672
 #define CONFIG_MACH_TYPE       MACH_TYPE_PM9G45
 
 /* ARM asynchronous clock */
@@ -40,7 +39,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -54,10 +52,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define        CONFIG_GREEN_LED        AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED         GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED       GPIO_PIN_PD(0)  /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -67,20 +64,6 @@
 #define CONFIG_BOOTP_GATEWAY           1
 #define CONFIG_BOOTP_HOSTNAME          1
 
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING                1
-#define CONFIG_CMD_DHCP                1
-#define CONFIG_CMD_NAND                1
-#define CONFIG_CMD_USB         1
-
-#define CONFIG_CMD_JFFS2               1
 #define CONFIG_JFFS2_CMDLINE           1
 #define CONFIG_JFFS2_NAND              1
 #define CONFIG_JFFS2_DEV               "nand0" /* NAND dev jffs2 lives on */
@@ -92,10 +75,6 @@
 #define PHYS_SDRAM                     0x70000000
 #define PHYS_SDRAM_SIZE                        0x08000000      /* 128 megs */
 
-/* NOR flash, not available */
-#define CONFIG_SYS_NO_FLASH            1
-#undef CONFIG_CMD_FLASH
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -121,12 +100,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT   1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00700000 /* _UHP_OHCI_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9g45"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE             1
 
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE    PHYS_SDRAM + 0xE00000
@@ -137,30 +114,14 @@
 #define CONFIG_SYS_MEMTEST_END         CONFIG_AT91SAM9G45_LCD_BASE
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_OFFSET              0x60000
 #define CONFIG_ENV_OFFSET_REDUND       0x80000
 #define CONFIG_ENV_SIZE                        0x20000         /* 1 sector = 128 kB */
 #define CONFIG_BOOTCOMMAND     "nand read 0x72000000 0x200000 0x200000; bootm"
-#define CONFIG_BOOTARGS                "fbcon=rotate:3 console=tty0 " \
-                               "console=ttyS0,115200 " \
-                               "root=/dev/mtdblock4 " \
-                               "mtdparts=atmel_nand:128k(bootstrap)ro," \
-                               "256k(uboot)ro,1664k(env)," \
-                               "2M(linux)ro,-(root) rw " \
-                               "rootfstype=jffs2"
-
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_SYS_PROMPT              "U-Boot> "
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
+
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING         1
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool