2 * Configuration settings for the Novena U-boot.
6 * SPDX-License-Identifier: GPL-2.0+
12 /* System configurations */
13 #define CONFIG_BOARD_EARLY_INIT_F
14 #define CONFIG_BOARD_LATE_INIT
15 #define CONFIG_MISC_INIT_R
17 #define CONFIG_KEYBOARD
19 #include "mx6_common.h"
22 #define CONFIG_CMD_ASKENV
23 #define CONFIG_CMD_BMODE
24 #define CONFIG_CMD_DHCP
25 #define CONFIG_CMD_EEPROM
26 #define CONFIG_CMD_I2C
27 #define CONFIG_FAT_WRITE
28 #define CONFIG_CMD_MII
29 #define CONFIG_CMD_PCI
30 #define CONFIG_CMD_PING
31 #define CONFIG_CMD_SATA
32 #define CONFIG_CMD_TIME
33 #define CONFIG_CMD_USB
36 /* U-Boot general configurations */
37 #define CONFIG_VERSION_VARIABLE /* U-BOOT version */
39 /* U-Boot environment */
40 #define CONFIG_ENV_SIZE (16 * 1024)
42 * Environment is on MMC, starting at offset 512KiB from start of the card.
43 * Please place first partition at offset 1MiB from the start of the card
44 * as recommended by GNU/fdisk. See below for details:
45 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
48 #define CONFIG_ENV_IS_IN_MMC
49 #define CONFIG_SYS_MMC_ENV_DEV 0
50 #define CONFIG_ENV_OFFSET (512 * 1024)
51 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
52 #define CONFIG_ENV_OFFSET_REDUND \
53 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
55 #define CONFIG_ENV_IS_NOWHERE
59 #define CONFIG_BOOTFILE "fitImage"
60 #define CONFIG_BOOTARGS "console=ttymxc1,115200 "
61 #define CONFIG_BOOTCOMMAND "run net_nfs"
62 #define CONFIG_HOSTNAME novena
64 /* Physical Memory Map */
65 #define CONFIG_NR_DRAM_BANKS 1
66 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
67 #define PHYS_SDRAM_SIZE 0xF0000000
69 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
70 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
71 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
73 #define CONFIG_SYS_INIT_SP_OFFSET \
74 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
75 #define CONFIG_SYS_INIT_SP_ADDR \
76 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
78 #define CONFIG_SYS_MEMTEST_START 0x10000000
79 #define CONFIG_SYS_MEMTEST_END 0x20000000
81 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
84 #define CONFIG_SPL_FAT_SUPPORT
85 #define CONFIG_SPL_MMC_SUPPORT
86 #include "imx6_spl.h" /* common IMX6 SPL configuration */
88 /* Ethernet Configuration */
90 #define CONFIG_FEC_MXC
92 #define IMX_FEC_BASE ENET_BASE_ADDR
93 #define CONFIG_FEC_XCV_TYPE RGMII
94 #define CONFIG_ETHPRIME "FEC"
95 #define CONFIG_FEC_MXC_PHYADDR 0x7
97 #define CONFIG_PHY_MICREL
98 #define CONFIG_PHY_MICREL_KSZ9021
99 #define CONFIG_ARP_TIMEOUT 200UL
103 #define CONFIG_SYS_I2C
104 #define CONFIG_SYS_I2C_MXC
105 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
106 #define CONFIG_I2C_MULTI_BUS
107 #define CONFIG_I2C_MXC
108 #define CONFIG_SYS_I2C_SPEED 100000
111 #ifdef CONFIG_CMD_EEPROM
112 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
113 #define CONFIG_SYS_SPD_BUS_NUM 2
117 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
118 #define CONFIG_SYS_FSL_USDHC_NUM 2
121 #ifdef CONFIG_CMD_PCI
123 #define CONFIG_PCI_PNP
124 #define CONFIG_PCI_SCAN_SHOW
125 #define CONFIG_PCIE_IMX
126 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
127 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
132 #define CONFIG_POWER_I2C
133 #define CONFIG_POWER_PFUZE100
134 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
137 #ifdef CONFIG_CMD_SATA
138 #define CONFIG_DWC_AHSATA
139 #define CONFIG_SYS_SATA_MAX_DEVICE 1
140 #define CONFIG_DWC_AHSATA_PORT_ID 0
141 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
143 #define CONFIG_LIBATA
147 #define CONFIG_MXC_UART
148 #define CONFIG_MXC_UART_BASE UART2_BASE
151 #ifdef CONFIG_CMD_USB
152 #define CONFIG_USB_EHCI
153 #define CONFIG_USB_EHCI_MX6
154 #define CONFIG_USB_STORAGE
155 #define CONFIG_USB_KEYBOARD
156 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
157 #define CONFIG_USB_HOST_ETHER
158 #define CONFIG_USB_ETHER_ASIX
159 #define CONFIG_USB_ETHER_SMSC95XX
160 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
161 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
162 #define CONFIG_MXC_USB_FLAGS 0
164 #define CONFIG_CI_UDC
165 #define CONFIG_USBD_HS
166 #define CONFIG_USB_GADGET_DUALSPEED
167 #define CONFIG_USB_ETHER
168 #define CONFIG_USB_ETH_CDC
169 #define CONFIG_NETCONSOLE
174 #define CONFIG_VIDEO_IPUV3
175 #define CONFIG_CFB_CONSOLE
176 #define CONFIG_VGA_AS_SINGLE_DEVICE
177 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
178 #define CONFIG_VIDEO_BMP_RLE8
179 #define CONFIG_SPLASH_SCREEN
180 #define CONFIG_BMP_16BPP
181 #define CONFIG_VIDEO_LOGO
182 #define CONFIG_IPUV3_CLK 260000000
183 #define CONFIG_CMD_HDMIDETECT
184 #define CONFIG_CONSOLE_MUX
185 #define CONFIG_IMX_HDMI
186 #define CONFIG_IMX_VIDEO_SKIP
189 /* Extra U-Boot environment. */
190 #define CONFIG_EXTRA_ENV_SETTINGS \
191 "fdt_high=0xffffffff\0" \
192 "initrd_high=0xffffffff\0" \
193 "consdev=ttymxc1\0" \
194 "baudrate=115200\0" \
195 "bootdev=/dev/mmcblk0p1\0" \
196 "rootdev=/dev/mmcblk0p2\0" \
198 "kernel_addr_r=0x18000000\0" \
200 "setenv bootargs ${bootargs} " \
201 "console=${consdev},${baudrate}\0" \
203 "setenv bootargs ${bootargs} " \
204 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
205 "${netmask}:${hostname}:${netdev}:off\0" \
207 "setenv bootargs ${bootargs} ${miscargs}\0" \
208 "addargs=run addcons addmisc\0" \
211 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
213 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
214 "miscargs=nohlt panic=1\0" \
215 "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
217 "setenv bootargs root=/dev/nfs rw " \
218 "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
220 "run mmcload mmcargs addargs ; " \
221 "bootm ${kernel_addr_r}\0" \
223 "run mmcload nfsargs addip addargs ; " \
224 "bootm ${kernel_addr_r}\0" \
226 "run netload mmcargs addargs ; " \
227 "bootm ${kernel_addr_r}\0" \
229 "run netload nfsargs addip addargs ; " \
230 "bootm ${kernel_addr_r}\0" \
231 "update_sd_spl_filename=SPL\0" \
232 "update_sd_uboot_filename=u-boot.img\0" \
233 "update_sd_firmware=" /* Update the SD firmware partition */ \
234 "if mmc rescan ; then " \
235 "if dhcp ${update_sd_spl_filename} ; then " \
236 "mmc write ${loadaddr} 2 0x200 ; " \
238 "if dhcp ${update_sd_uboot_filename} ; then " \
239 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
243 #endif /* __CONFIG_H */