[J-u-boot.git] / include / configs / PM854.h

/*
 * Copyright 2004 Freescale Semiconductor.
 * (C) Copyright 2002,2003 Motorola,Inc.
 * Xianghua Xiao <X.Xiao@motorola.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * pm854 board configuration file
 *
 * Please refer to doc/README.mpc85xx for more info.
 *
 * Make sure you change the MAC address and other network params first,
 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
#define CONFIG_MPC8540		1	/* MPC8540 specific */
#define CONFIG_PM854		1	/* PM854 board specific */

#define CONFIG_PCI
#define CONFIG_TSEC_ENET		/* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

/*
 * sysclk for MPC85xx
 *
 * Two valid values are:
 *    33000000
 *    66000000
 *
 * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
 * is likely the desired value here, so that is now the default.
 * The board, however, can run at 66MHz.  In any event, this value
 * must match the settings of some switches.  Details can be found
 * in the README.mpc85xxads.
 */

#ifndef CONFIG_SYS_CLK_FREQ
#define CONFIG_SYS_CLK_FREQ	66000000
#endif


/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */
#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */

#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */

#undef	CFG_DRAM_TEST			/* memory test, takes time */
#define CFG_MEMTEST_START	0x00200000	/* memtest region */
#define CFG_MEMTEST_END		0x00400000


/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
#define CFG_CCSRBAR_PHYS	CFG_CCSRBAR	/* physical addr of CCSRBAR */
#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */


/* DDR Setup */
#define CONFIG_FSL_DDR1
#undef CONFIG_FSL_DDR_INTERACTIVE
#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
#undef CONFIG_DDR_SPD
#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
#define CONFIG_DDR_ECC			    /* only for ECC DDR module */

#define CONFIG_MEM_INIT_VALUE	0xDeadBeef

#define CFG_DDR_SDRAM_BASE	0x00000000
#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
#define CONFIG_VERY_BIG_RAM

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	2

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS	0x58	/* CTLR 0 DIMM 0 */

/* Manually set up DDR parameters */
#define CFG_SDRAM_SIZE	256		/* DDR is 256 MB */
#define CFG_DDR_CS0_BNDS	0x0000000f	/* 0-256MB */
#define CFG_DDR_CS0_CONFIG	0x80000102
#define CFG_DDR_TIMING_1	0x47444321
#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
#define CFG_DDR_CONTROL	0xc2008000	/* unbuffered,no DYN_PWR */
#define CFG_DDR_MODE	0x00000062	/* DLL,normal,seq,4/2.5 */
#define CFG_DDR_INTERVAL	0x045b0100	/* autocharge,no open page */

/*
 * SDRAM on the Local Bus
 */
#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
#define CFG_LBC_SDRAM_SIZE	0		/* LBC SDRAM is 0 MB */

#define CFG_FLASH_BASE		0xfe000000	/* start of 32 MB FLASH */
#define CFG_BR0_PRELIM		0xfe001801	/* port size 32bit */

#define CFG_OR0_PRELIM		0xfe006f67	/* 32 MB Flash */
#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
#undef	CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */


#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
#define CFG_RAMBOOT
#else
#undef	CFG_RAMBOOT
#endif

#define CONFIG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO

#undef CONFIG_CLOCKS_IN_MHZ

/*
 * Local Bus Definitions
 */
#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
#define CFG_LBC_LSRT		0x20000000    /* LB sdram refresh timer */
#define CFG_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/


#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK	1
#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */

#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Mon */
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX     1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	1
#define CFG_NS16550_CLK		get_bus_freq(0)

#define CFG_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef	CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_SLAVE		0x7F
#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
#define CFG_I2C_OFFSET		0x3000

/*
 * EEPROM configuration
 */
#define CFG_I2C_EEPROM_ADDR		0x58
#define CFG_I2C_EEPROM_ADDR_LEN		1
#define CFG_EEPROM_PAGE_WRITE_BITS	4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10

/*
 * RTC configuration
 */
#define CONFIG_RTC_PCF8563
#define CFG_I2C_RTC_ADDR		0x51

/* RapidIO MMU */
#define CFG_RIO_MEM_BASE	0xc0000000	/* base address */
#define CFG_RIO_MEM_PHYS	CFG_RIO_MEM_BASE
#define CFG_RIO_MEM_SIZE	0x20000000	/* 128M */

/*
 * General PCI
 * Addresses are mapped 1-1.
 */
#define CFG_PCI1_MEM_BASE	0x80000000
#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI1_IO_BASE	0xe2000000
#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */

#if defined(CONFIG_PCI)

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#define CONFIG_EEPRO100
#define	CONFIG_E1000
#undef	CONFIG_TULIP

#if !defined(CONFIG_PCI_PNP)
    #define PCI_ENET0_IOADDR	0xe0000000
    #define PCI_ENET0_MEMADDR	0xe0000000
    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
#endif

#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */

#endif	/* CONFIG_PCI */


#if defined(CONFIG_TSEC_ENET)

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"TSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"TSEC1"
#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		1
#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT

#define CONFIG_MPC85XX_FEC	1
#define CONFIG_MPC85XX_FEC_NAME		"FEC"
#define FEC_PHY_ADDR		3
#define FEC_PHYIDX		0
#define FEC_FLAGS		0

/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME		"TSEC0"

#define CONFIG_HAS_ETH0
#define	CONFIG_HAS_ETH1		1
#define	CONFIG_HAS_ETH2		1

#endif	/* CONFIG_TSEC_ENET */


/*
 * Environment
 */
#ifndef CFG_RAMBOOT
  #define CONFIG_ENV_IS_IN_FLASH	1
  #define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - 0x80000)
  #define CONFIG_ENV_SECT_SIZE	0x40000 /* 256K(one sector) for env */
  #define CONFIG_ENV_SIZE		0x2000
#else
  #define CFG_NO_FLASH		1	/* Flash is not usable now */
  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
  #define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
  #define CONFIG_ENV_SIZE		0x2000
#endif

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_DATE
#define CONFIG_CMD_EEPROM

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#if defined(CFG_RAMBOOT)
    #undef CONFIG_CMD_ENV
    #undef CONFIG_CMD_LOADS
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory */
#define CFG_LOAD_ADDR	0x2000000	/* default load address */
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */

#if defined(CONFIG_CMD_KGDB)
    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
#else
    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
#endif

#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
#define CONFIG_LOOPW

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif


/*
 * Environment Configuration
 */

/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_ETHADDR	 00:40:42:01:00:00
#define CONFIG_ETH1ADDR	 00:40:42:01:00:01
#define CONFIG_ETH2ADDR	 00:40:42:01:00:02
#endif


#define CONFIG_ROOTPATH		/opt/eldk/ppc_85xx
#define CONFIG_BOOTFILE		pm854/uImage

#define CONFIG_HOSTNAME		pm854
#define CONFIG_IPADDR	 192.168.0.103
#define CONFIG_SERVERIP	 192.168.0.64
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_NETMASK	 255.255.255.0

#define CONFIG_LOADADDR	 200000 /* default location for tftp and bootm */

#define CONFIG_BOOTDELAY 5	/* -1 disables auto-boot */
#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs */

#define CONFIG_BAUDRATE 9600

#define CONFIG_EXTRA_ENV_SETTINGS					\
   "netdev=eth0\0"							\
   "consoledev=ttyS0\0"							\
   "ramdiskaddr=400000\0"						\
   "ramdiskfile=pm854/uRamdisk\0"

#define CONFIG_NFSBOOTCOMMAND						\
   "setenv bootargs root=/dev/nfs rw "					\
      "nfsroot=$serverip:$rootpath "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $loadaddr $bootfile;"						\
   "bootm $loadaddr"

#define CONFIG_RAMBOOTCOMMAND \
   "setenv bootargs root=/dev/ram rw "					\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $ramdiskaddr $ramdiskfile;"					\
   "tftp $loadaddr $bootfile;"						\
   "bootm $loadaddr $ramdiskaddr"

#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
384cc687 WD	1	/*
	2	* Copyright 2004 Freescale Semiconductor.
	3	* (C) Copyright 2002,2003 Motorola,Inc.
	4	* Xianghua Xiao <X.Xiao@motorola.com>
	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	/*
	26	* pm854 board configuration file
	27	*
	28	* Please refer to doc/README.mpc85xx for more info.
	29	*
	30	* Make sure you change the MAC address and other network params first,
	31	* search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
	32	*/
	33
	34	#ifndef __CONFIG_H
	35	#define __CONFIG_H
	36
	37	/* High Level Configuration Options */
	38	#define CONFIG_BOOKE 1 /* BOOKE */
	39	#define CONFIG_E500 1 /* BOOKE e500 family */
	40	#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
	41	#define CONFIG_MPC8540 1 /* MPC8540 specific */
	42	#define CONFIG_PM854 1 /* PM854 board specific */
	43
	44	#define CONFIG_PCI
	45	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	46	#define CONFIG_ENV_OVERWRITE
d9b94f28	47
45f2166a	48	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
384cc687 WD	49
	50	/*
	51	* sysclk for MPC85xx
	52	*
	53	* Two valid values are:
	54	* 33000000
	55	* 66000000
	56	*
	57	* Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
	58	* is likely the desired value here, so that is now the default.
	59	* The board, however, can run at 66MHz. In any event, this value
	60	* must match the settings of some switches. Details can be found
	61	* in the README.mpc85xxads.
	62	*/
	63
	64	#ifndef CONFIG_SYS_CLK_FREQ
	65	#define CONFIG_SYS_CLK_FREQ 66000000
	66	#endif
	67
	68
	69	/*
	70	* These can be toggled for performance analysis, otherwise use default.
	71	*/
	72	#define CONFIG_L2_CACHE /* toggle L2 cache */
	73	#define CONFIG_BTB /* toggle branch predition */
	74	#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
	75
	76	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
	77
	78	#undef CFG_DRAM_TEST /* memory test, takes time */
	79	#define CFG_MEMTEST_START 0x00200000 /* memtest region */
	80	#define CFG_MEMTEST_END 0x00400000
	81
	82
	83	/*
	84	* Base addresses -- Note these are effective addresses where the
	85	* actual resources get mapped (not physical addresses)
	86	*/
	87	#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	88	#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
f69766e4	89	#define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */
384cc687 WD	90	#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
	91
	92
d53bd3e1 KG	93	/* DDR Setup */
	94	#define CONFIG_FSL_DDR1
	95	#undef CONFIG_FSL_DDR_INTERACTIVE
	96	#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
	97	#undef CONFIG_DDR_SPD
	98	#define CONFIG_DDR_DLL /* possible DLL fix needed */
	99	#define CONFIG_DDR_ECC /* only for ECC DDR module */
384cc687	100
d53bd3e1	101	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
384cc687	102
d53bd3e1 KG	103	#define CFG_DDR_SDRAM_BASE 0x00000000
	104	#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
	105	#define CONFIG_VERY_BIG_RAM
	106
	107	#define CONFIG_NUM_DDR_CONTROLLERS 1
	108	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	109	#define CONFIG_CHIP_SELECTS_PER_CTRL 2
	110
	111	/* I2C addresses of SPD EEPROMs */
	112	#define SPD_EEPROM_ADDRESS 0x58 /* CTLR 0 DIMM 0 */
	113
	114	/* Manually set up DDR parameters */
	115	#define CFG_SDRAM_SIZE 256 /* DDR is 256 MB */
	116	#define CFG_DDR_CS0_BNDS 0x0000000f /* 0-256MB */
	117	#define CFG_DDR_CS0_CONFIG 0x80000102
	118	#define CFG_DDR_TIMING_1 0x47444321
	119	#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
	120	#define CFG_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */
	121	#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
	122	#define CFG_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */
384cc687 WD	123
	124	/*
	125	* SDRAM on the Local Bus
	126	*/
	127	#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
	128	#define CFG_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */
	129
	130	#define CFG_FLASH_BASE 0xfe000000 /* start of 32 MB FLASH */
	131	#define CFG_BR0_PRELIM 0xfe001801 /* port size 32bit */
	132
	133	#define CFG_OR0_PRELIM 0xfe006f67 /* 32 MB Flash */
	134	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
	135	#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
	136	#undef CFG_FLASH_CHECKSUM
	137	#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	138	#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	139
	140	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
	141
	142
	143	#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
	144	#define CFG_RAMBOOT
	145	#else
	146	#undef CFG_RAMBOOT
	147	#endif
	148
00b1883a	149	#define CONFIG_FLASH_CFI_DRIVER
992b402b WD	150	#define CFG_FLASH_CFI
	151	#define CFG_FLASH_EMPTY_INFO
	152
	153	#undef CONFIG_CLOCKS_IN_MHZ
	154
384cc687 WD	155	/*
	156	* Local Bus Definitions
	157	*/
384cc687 WD	158	#define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */
	159	#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
	160	#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
	161	#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
8b0bfc68	162
384cc687 WD	163
	164	#define CONFIG_L1_INIT_RAM
	165	#define CFG_INIT_RAM_LOCK 1
	166	#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
	167	#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
	168
	169	#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
	170	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
	171	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
	172
	173	#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
	174	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
	175
	176	/* Serial Port */
	177	#define CONFIG_CONS_INDEX 1
	178	#undef CONFIG_SERIAL_SOFTWARE_FIFO
	179	#define CFG_NS16550
	180	#define CFG_NS16550_SERIAL
	181	#define CFG_NS16550_REG_SIZE 1
	182	#define CFG_NS16550_CLK get_bus_freq(0)
	183
	184	#define CFG_BAUDRATE_TABLE \
	185	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
	186
	187	#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
	188	#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
	189
	190	/* Use the HUSH parser */
	191	#define CFG_HUSH_PARSER
	192	#ifdef CFG_HUSH_PARSER
	193	#define CFG_PROMPT_HUSH_PS2 "> "
	194	#endif
	195
20476726 JL	196	/*
	197	* I2C
	198	*/
	199	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	200	#define CONFIG_HARD_I2C /* I2C with hardware support*/
384cc687 WD	201	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	202	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
	203	#define CFG_I2C_SLAVE 0x7F
	204	#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
20476726	205	#define CFG_I2C_OFFSET 0x3000
384cc687 WD	206
	207	/*
	208	* EEPROM configuration
	209	*/
	210	#define CFG_I2C_EEPROM_ADDR 0x58
	211	#define CFG_I2C_EEPROM_ADDR_LEN 1
	212	#define CFG_EEPROM_PAGE_WRITE_BITS 4
	213	#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
	214
	215	/*
	216	* RTC configuration
	217	*/
	218	#define CONFIG_RTC_PCF8563
	219	#define CFG_I2C_RTC_ADDR 0x51
	220
	221	/* RapidIO MMU */
	222	#define CFG_RIO_MEM_BASE 0xc0000000 /* base address */
	223	#define CFG_RIO_MEM_PHYS CFG_RIO_MEM_BASE
	224	#define CFG_RIO_MEM_SIZE 0x20000000 /* 128M */
	225
	226	/*
	227	* General PCI
	228	* Addresses are mapped 1-1.
	229	*/
	230	#define CFG_PCI1_MEM_BASE 0x80000000
	231	#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
	232	#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
	233	#define CFG_PCI1_IO_BASE 0xe2000000
	234	#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
	235	#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
	236
	237	#if defined(CONFIG_PCI)
	238
	239	#define CONFIG_NET_MULTI
	240	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	241
63ff004c	242	#define CONFIG_EEPRO100
29fe1c0f WD	243	#define CONFIG_E1000
29fe1c0f WD	244	#undef CONFIG_TULIP
384cc687 WD	245
	246	#if !defined(CONFIG_PCI_PNP)
	247	#define PCI_ENET0_IOADDR 0xe0000000
	248	#define PCI_ENET0_MEMADDR 0xe0000000
	249	#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
	250	#endif
	251
	252	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	253	#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
	254
	255	#endif /* CONFIG_PCI */
	256
	257
	258	#if defined(CONFIG_TSEC_ENET)
	259
	260	#ifndef CONFIG_NET_MULTI
	261	#define CONFIG_NET_MULTI 1
	262	#endif
	263
	264	#define CONFIG_MII 1 /* MII PHY management */
255a3577 KP	265	#define CONFIG_TSEC1 1
	266	#define CONFIG_TSEC1_NAME "TSEC0"
	267	#define CONFIG_TSEC2 1
	268	#define CONFIG_TSEC2_NAME "TSEC1"
992b402b WD	269	#define TSEC1_PHY_ADDR 0
992b402b WD	270	#define TSEC2_PHY_ADDR 1
384cc687 WD	271	#define TSEC1_PHYIDX 0
384cc687 WD	272	#define TSEC2_PHYIDX 0
3a79013e AF	273	#define TSEC1_FLAGS TSEC_GIGABIT
3a79013e AF	274	#define TSEC2_FLAGS TSEC_GIGABIT
384cc687 WD	275
384cc687 WD	276	#define CONFIG_MPC85XX_FEC 1
d9b94f28	277	#define CONFIG_MPC85XX_FEC_NAME "FEC"
992b402b	278	#define FEC_PHY_ADDR 3
384cc687	279	#define FEC_PHYIDX 0
3a79013e	280	#define FEC_FLAGS 0
384cc687	281
d9b94f28 JL	282	/* Options are: TSEC[0-1] */
d9b94f28 JL	283	#define CONFIG_ETHPRIME "TSEC0"
384cc687	284
10327dc5	285	#define CONFIG_HAS_ETH0
384cc687 WD	286	#define CONFIG_HAS_ETH1 1
	287	#define CONFIG_HAS_ETH2 1
	288
	289	#endif /* CONFIG_TSEC_ENET */
	290
	291
	292	/*
	293	* Environment
	294	*/
	295	#ifndef CFG_RAMBOOT
5a1aceb0	296	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	297	#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x80000)
	298	#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
	299	#define CONFIG_ENV_SIZE 0x2000
384cc687 WD	300	#else
384cc687 WD	301	#define CFG_NO_FLASH 1 /* Flash is not usable now */
93f6d725	302	#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
0e8d1586 JCPV	303	#define CONFIG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
0e8d1586 JCPV	304	#define CONFIG_ENV_SIZE 0x2000
384cc687 WD	305	#endif
	306
	307	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	308	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	309
2835e518	310
a1aa0bb5 JL	311	/*
	312	* BOOTP options
	313	*/
	314	#define CONFIG_BOOTP_BOOTFILESIZE
	315	#define CONFIG_BOOTP_BOOTPATH
	316	#define CONFIG_BOOTP_GATEWAY
	317	#define CONFIG_BOOTP_HOSTNAME
	318
	319
2835e518 JL	320	/*
	321	* Command line configuration.
	322	*/
	323	#include <config_cmd_default.h>
	324
	325	#define CONFIG_CMD_PING
	326	#define CONFIG_CMD_I2C
	327	#define CONFIG_CMD_MII
	328	#define CONFIG_CMD_DATE
	329	#define CONFIG_CMD_EEPROM
	330
	331	#if defined(CONFIG_PCI)
	332	#define CONFIG_CMD_PCI
	333	#endif
	334
384cc687	335	#if defined(CFG_RAMBOOT)
2835e518 JL	336	#undef CONFIG_CMD_ENV
2835e518 JL	337	#undef CONFIG_CMD_LOADS
384cc687 WD	338	#endif
384cc687 WD	339
384cc687 WD	340
	341	#undef CONFIG_WATCHDOG /* watchdog disabled */
	342
	343	/*
	344	* Miscellaneous configurable options
	345	*/
	346	#define CFG_LONGHELP /* undef to save memory */
	347	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
	348	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
	349
2835e518	350	#if defined(CONFIG_CMD_KGDB)
384cc687 WD	351	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
	352	#else
	353	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
	354	#endif
	355
	356	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
	357	#define CFG_MAXARGS 16 /* max number of command args */
	358	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
	359	#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
	360	#define CONFIG_LOOPW
	361
	362	/*
	363	* For booting Linux, the board info and command line data
	364	* have to be in the first 8 MB of memory, since this is
	365	* the maximum mapped by the Linux kernel during initialization.
	366	*/
	367	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
	368
384cc687 WD	369	/*
	370	* Internal Definitions
	371	*
	372	* Boot Flags
	373	*/
	374	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	375	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	376
2835e518	377	#if defined(CONFIG_CMD_KGDB)
384cc687 WD	378	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	379	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	380	#endif
	381
	382
	383	/*
	384	* Environment Configuration
	385	*/
	386
	387	/* The mac addresses for all ethernet interface */
	388	#if defined(CONFIG_TSEC_ENET)
	389	#define CONFIG_ETHADDR 00:40:42:01:00:00
	390	#define CONFIG_ETH1ADDR 00:40:42:01:00:01
	391	#define CONFIG_ETH2ADDR 00:40:42:01:00:02
	392	#endif
	393
384cc687	394
992b402b WD	395	#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
992b402b WD	396	#define CONFIG_BOOTFILE pm854/uImage
384cc687	397
992b402b WD	398	#define CONFIG_HOSTNAME pm854
	399	#define CONFIG_IPADDR 192.168.0.103
	400	#define CONFIG_SERVERIP 192.168.0.64
384cc687 WD	401	#define CONFIG_GATEWAYIP 192.168.0.1
	402	#define CONFIG_NETMASK 255.255.255.0
	403
	404	#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
	405
	406	#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
	407	#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
	408
	409	#define CONFIG_BAUDRATE 9600
	410
	411	#define CONFIG_EXTRA_ENV_SETTINGS \
	412	"netdev=eth0\0" \
	413	"consoledev=ttyS0\0" \
	414	"ramdiskaddr=400000\0" \
992b402b	415	"ramdiskfile=pm854/uRamdisk\0"
384cc687 WD	416
	417	#define CONFIG_NFSBOOTCOMMAND \
	418	"setenv bootargs root=/dev/nfs rw " \
	419	"nfsroot=$serverip:$rootpath " \
	420	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	421	"console=$consoledev,$baudrate $othbootargs;" \
	422	"tftp $loadaddr $bootfile;" \
	423	"bootm $loadaddr"
	424
	425	#define CONFIG_RAMBOOTCOMMAND \
	426	"setenv bootargs root=/dev/ram rw " \
	427	"console=$consoledev,$baudrate $othbootargs;" \
	428	"tftp $ramdiskaddr $ramdiskfile;" \
	429	"tftp $loadaddr $bootfile;" \
	430	"bootm $loadaddr $ramdiskaddr"
	431
	432	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
	433
	434	#endif /* __CONFIG_H */